10 best stack on lock cylinders

Product description

"This drawer and cabinet lock makes it easy to secure your drawers, important files and small items. It is constructed of diecast and steel components with a stainless steel finish, and features a ¾” outside cylinder diameter with a 1-1/8” length that will accommodate up to 13/16” thick panels. It’s durable, strong and installation is simple and easy. This drawer and cabinet lock can be mounted to metal or wood, door and/or drawer panels.



It comes complete with 3 cams, a trim collar, 2 reversible rotation washers, 2 keys and fasteners. The lock is keyed different with a Yale Y-11 keyway."

From the Manufacturer

This drawer & cabinet lock is constructed of diecast and steel components and it comes in a stainless steel finish. This lock features a 3/4 in. outside cylinder diameter with a 1-1/8 in. length that will accommodate up to 13/16 in. thick panels. This drawer & cabinet lock can be mounted to metal or wood; door and/or drawer panels, and it comes complete with 3 cams, a trim collar, 2 reversible rotation washers, 2 keys and fasteners. This model number is keyed different and it uses Yale Y-11 keyway. Others have used these to replace damaged locks in work truck tool boxes and gumball machines.

• SECURE CABINET DOORS AND DRAWERS – This U 9945 lock can be used to secure cabinet doors, drawers and much more.
• DURABLE CONSTRUCTION – This drawer and cabinet lock is constructed of diecast and steel components with a stainless steel finish. It’s durable and strong, perfect for keeping your small items safe.
• COMES COMPLETE - This drawer and cabinet lock comes complete with 3 cams, a trim collar, 2 reversible rotation washers, 2 keys and fasteners. Keyed Different, Yale Y-11 keyway.
• EASY INSTALLATION  - Installation is quick and easy – additional security for your small items and drawers are within reach! It can be mounted to metal or wood, door and/or drawer panels.
• PRODUCT INFO - This lock features a ¾” outside cylinder diameter with a 1-1/8” length that will accommodate up to 13/16” thick panels. Safety & Security Product Type-Lock & Door Reinforcer
• NOTE – Each lockset includes a pre-made key for the lock. There is a limited assortment of keys. If more than one lockset is purchased, the same key may open multiple locks

User questions & answers

Question:	Can I get a master key for 12 locks
Answer:	It will fit most. You will still need to measure yours and check the dimensions needed and what sort of clearances your specific filing cabinet will accept.
Question:	What is
Answer:	U 9945KA is the keyed alike version
Question:	Will this lock work with any metal filing cabinet
Answer:	Hello: The Child Craft Avery SafeAccess Crib has two levels for the mattress support. The highest level (for use with infants) is 17.5" from the top of the mattress support (without a mattress) to the floor. When the mattress support is in the lower position, it is 10.25" from the top of the mattress support to the floor. This crib comes with a 3" mattress so you can add 3" in for the actual height the baby would be at if you'd like!
Question:	can these be keyed alike
Answer:	Good afternoon, There is 28.6” from mattress support in lowest position to top of side rails. If they use the 3” mattress it comes with there is 25.6” from the top of the mattress to the top of the side rails.

Product description

Direct replacement key lock for current models only of Stack-On and Sentinel key locking gun cabinets. This will not work on older cabinets with the tubular keys. This will not work on the smaller personal pistol boxes either. This will not replace the lock on units with dial type or electronic combination locks.

• 2 Keys
• Mounting hardware
• Bright brass finsih
• Direct replacement for key locks in current production Stack-On cabinets
• Does not work in any cabinets that use round keys

User questions & answers

Question:	What is the length of this lock
Answer:	The outer dimensions of the bottom are approximately 2 1/8 by 2 1/8. The inner dimensions seem to be approximately 1 3/5 by 1 3/4.
Question:	Can duplicate keys be made for this lock
Answer:	They are just under 6" tall. I love them.
Question:	If I buy two lock's at the same time well they be keyed the same
Answer:	The holes are good sized but there are only three of them. The other side has a the option of using a measuring spoon. It would depend on how small the flakes were.
Question:	What size tube is this lock
Answer:	The lid is 41/2 in across jar tapers to 4in.

Product description

7 Pin Tubular Cam Lock - 5/8" Cylinder Length The FJM Security Tubular Cam Lock (sometimes called the ace cam lock) has a 5/8" cylinder length and can accommodate material thickness up to 3/8" thick. The 1-1/4" cam can be installed at the 12, 3, 6 and 9 o’clock positions with a 90 degree turn. The stop cam is reversible so that the lock key can either be turned to the right or left to open. The cylinder diameter is standard at 3/4". The small cam lock is constructed of zinc alloy and is chrome plated. The hex nut, cam, screw and keys are all steel with chrome plating.

Secure Keyway The tubular cam lock is keyed alike (all keys to all the locks you buy will work with each on all of your locks) with 7 pin security. It is also non-key retaining - The key can be removed in the locked and unlocked positions.

Included In The Box

• Tubular Cam Lock
• Two Keys
• Cylinder Nut
• 1-1/4" Cam and Cam Nut

Accessories The MEI-2400 locks are compatible with FJM Security dual hole cams. Go to amazon.com/fjmsecurity to see more cabinet lock accessories.

Applications

• Furniture
• Electronics Enclosures
• HVAC
• Industrial Enclosures
• Industrial Equipment
• Medical Cabinets and Equipment
• Recreation Vehicles
• Transportation
• Vending POS
• Replaces Any Current Cam Lock Application

• Chrome tubular cam lock (sometimes called the ace cam lock) comes keyed alike with two keys per lock - each key will fit with each lock that you purchase
• The FJM Security tubular cam lock has a 5/8” cylinder length and can fit material thickness of up to 3/8” – it is a standard size cam lock with 3/4” diameter
• Cam lock ships with two keys, a steel cylinder nut, stop cam, 1-1/4” cam and cam nut – the tubular lock is constructed of zinc alloy and is chrome plated
• Offers incredibly versatile installation options – the cam can be installed on the lock at the 3, 6, 9 and 12 o’clock positions and opens with a 90 degree turn
• Ships with a reversible stop cam and is available non-key retaining – the key can be removed from the lock from the locked and unlocked position

User questions & answers

Question:	Has anybody used these on a homak gun cabnet
Answer:	The more forcefully you pull the more tension you feel. It’s a fan for resistance. There is no dial to increased or decrease resistance.
Question:	Are these similar to ones used in stores on glass cabinets
Answer:	Yes
Question:	can i get 3 with a 90 degree turn and 5 with a
Answer:	no. it only provides strokes per minute, total cals (which by my experienced estimations using a concept2 are not accurate), and total time. I wish it gave a distance rowed or wattage output. what I mean on the cals is that if I row at 34 strokes per minute for about 1:30 it only registers 8 or 9 cals... when in reality that cadence would be about a 500m distance where I'd burn 20-21 cals rowing on a concept2. but the durability and functional use of this is pretty darn solid. just not the best data capture.
Question:	I'm ordering 4 of these cam-locks today. I need all 4 to use the same key
Answer:	I have no way of measuring the circumference of the neck on the jar. I can tell you I have been waiting to see if these came back in stock because they are awesome spice jars. I love the caps they come with when ordering. I'm ordering two more sets. Fantastic size!

• Each lock comes with two keyed alike keys, meaning all locks of the same size purchased on this listing will use the same key
• The Kingsley tubular cam lock has a 5/8" cylinder length and can fit material thickness of up to 3/8" - it is a standard size cam lock with 3/4" diameter
• Cam lock ships with two keys, a steel cylinder nut, stop cam, 1-1/4" cam and cam nut - the tubular lock is constructed of zinc alloy and is chrome plated
• The key can be removed from the locked and unlocked position

User questions & answers

Question:	if i order 1/1/8 and 3/8 in same order can they be keyed same or will they be different
Answer:	Even at the highest setting the tension is not that great. All the tension settings seem to be about the same - fairly easy. I would not buy this again
Question:	The different sizes offered refer to exactly what measurement? Apparently not threaded length as I had assumed
Answer:	Yes
Question:	can i use this as a replacment on my truck door
Answer:	It does not have Bluetooth just a digital display. My watch does recognize towing as an activity and records it. But it’s the watch not the rower
Question:	If I order, say, 6 of these at the same time will they all be keyed alike? That's what I want
Answer:	Hi There! Thank you for your interest in the EFITMENT - RW036 ROWER. Yes, our Max User Weight is 245lbs. We ask you kindly to reach out to us if you have any further questions or concerns. Our business hours are Monday through Friday from 8:30am to 5:30pm PST. Have a wonderful weekend! Thank you, ZooVaa Customer Service Team

Product features

Cam Lock Details

The cam lock, sometimes called a barrel or tube lock, is constructed of zinc alloy and is chrome plated. All pieces are steel with chrome plating. The cam lock is keyed alike (all keys to all the same sized locks you buy on this listing will work on all of your locks). The Keys use 7 pin security. It is also non-key retaining - The key can be removed in the locked and unlocked positions.

Product description

This drawer and cabinet lock makes it easy to secure your drawers, important files and small items. It is constructed of diecast and steel components with a stainless steel finish, and features a ¾” outside cylinder diameter with a 5/8” length that will accommodate up to 5/16” thick panels. It’s durable, strong and installation is simple and easy. This drawer and cabinet lock can be mounted to metal or wood, door and/or drawer panels. It comes complete with 3 cams, a trim collar, 2 reversible rotation washers, 2 keys and fasteners. The lock is keyed different with a Yale Y-11 keyway.

From the Manufacturer

This drawer & cabinet lock is constructed of diecast and steel components and it comes in a stainless steel finish. This lock features a 3/4 in. outside cylinder diameter with a 5/8 in. length that will accommodate up to 5/16 in. thick panels. This drawer & cabinet lock can be mounted to metal or wood; door and/or drawer panels, and it comes complete with 3 cams, a trim collar, 2 reversible rotation washers, 2 keys and fasteners. This model number is keyed different and it uses Yale Y-11 keyway. Others have used these to replace damaged locks in work truck tool boxes and gumball machines.

• SECURE CABINET DOORS AND DRAWERS – This U 9941 lock can be used to secure cabinet doors, drawers and much more.
• DURABLE CONSTRUCTION – This drawer and cabinet lock is constructed of diecast and steel components with a stainless steel finish. It’s durable and strong, perfect for keeping your small items safe.
• COMES COMPLETE - This drawer and cabinet lock comes complete with 3 cams, a trim collar, 2 reversible rotation washers, 2 keys and fasteners. Keyed Different, Yale Y-11 keyway.
• EASY INSTALLATION  - Installation is quick and easy – additional security for your small items and drawers are within reach! It can be mounted to metal or wood, door and/or drawer panels.
• PRODUCT INFO - This lock features a ¾” outside cylinder diameter with a 5/8” length that will accommodate up to 5/16” thick panels.

User questions & answers

Question:	Will this work for a drawer that is just a panel of sheet metal? (essentially no thickness to the drawer at all
Answer:	There are 3 different cams-(lock bar) that come with the lock-(2 straight and 1 offset). The lengths are measured from the center of the square hole in the cam to the tip. The offset is 1 1/8?, the short straight one is 1 1/4" and the long straight on is 2".
Question:	The lock I need to replace rotates a rod with a flat slot on its end that fits into the back of the lock. Will this wo
Answer:	If you'd like to purchase two keyed alike, you'll need to purchase our U-9941KA. See this item: https://www.amazon.com/Prime-Line-Products-9941KA-8-Inch-Stainless/dp/B002FYERHG
Question:	What is the length measurement of the lock bar
Answer:	Yes, this is a keyed alike lock and all the keys will fit each of this particular item ordered.
Question:	Can 2 be keyed the same
Answer:	If you take to a locksmith who can do wafer style of locks it can be rekeyed.

Product description

"

Disc Tumbler Cam Lock- 5/8” Cylinder Length

The FJM Security tumbler cam lock has a 5/8” cylinder length and can accommodate material thickness up to 3/8” thick. The 1-1/4” cam can be installed at the 12,3,6 and 9 o’clock positions with a 90 degree turn. The stop cam is reversible so that the lock key can either be turned to the right or left to open. The cylinder diameter is standard at ¾”. The small cam lock is constructed of zinc alloy and has a black finish. The hex nut, cam, screw and keys are all steel with chrome plating.

Secure Keyway

The disc tumbler cam lock is keyed different; each lock takes a different key. It is also non-key retaining- The key can be removed in the locked and unlocked positions.

Included in the Box

• Disc tumbler cam lock
• Two keys
• Cylinder nut
• 1-1/4” cam and cam screw

Applications

• Furniture
• Electronics Enclosures
• HVAC
• Industrial Enclosures
• Industrial Equipment
• Medical Cabinets and Equipment
• Recreation Vehicles
• Transportation
• Vending POS
• Replaces any current cam lock application

"

From the Manufacturer

Disc Tumbler Cam Lock- 5/8" Cylinder Length The FJM Security tumbler cam lock has a 5/8" cylinder length and can accommodate material thickness up to 3/8" thick. The 1-1/4" cam can be installed at the 12, 3, 6 and 9 o'clock positions with a 90 degree turn. The stop cam is reversible so that the lock key can either be turned to the right or left to open. The cylinder diameter is standard at 3/4". The small cam lock is constructed of zinc alloy and has a black finish. The hex nut, cam, screw and keys are all steel with chrome plating.

Secure Keyway The disc tumbler cam lock is keyed different (each key works with a different lock). It's also available non -key retaining- The key can be removed in the locked and unlocked positions.

Included in the Box

• Disc tumbler cam lock
• Two keys
• Cylinder nut
• 1-1/4" cam and cam screw

Applications

• Furniture
• Electronics Enclosures
• HVAC
• Industrial Enclosures
• Industrial Equipment
• Medical Cabinets and Equipment
• Recreation Vehicles
• Transportation
• Vending POS
• Replaces any current cam lock application

.

• This disc tumbler cam lock comes with two keys per lock and is keyed different, each set of keys will fit a different lock - it is also non-key retaining
• The FJM Security disc cam lock has a 5/8" cylinder length and can fit material thickness of up to 3/8" - it is a standard size cam lock with 3/4" diameter
• Cam lock ships with two keys, a steel cylinder nut, stop cam, 1-1/4" cam and cam nut - the tubular lock is constructed of zinc alloy and has a black finish
• Offers incredibly versatile installation options - the cam can be installed on the lock at the 3, 6, 9 and 12 o'clock positions and opens with a 90 degree turn
• Ships with a reversible stop cam and is available non-key retaining - the key can be removed from the lock from the locked and unlocked position

Product features

Black Cabinet Lock

• Comes with 1-1/4" straight cam
• Black finish

Keying

• 7/8" Cylinder length
• Available keyed alike or keyed different

Included in the Box

• Black cabinet lock
• Two keys
• Cylinder nut
• 1-1/4” Cam and cam screw

Product description

Used widely for desk drawer, tool box, electric cabinet or other security equipments.The metal cam turns behind the frame or jamb and is locked in position by the removal of the key.

• Product Name : Cam Lock;Main Material : Metal
• Color : Silver Tone;Total Size(Approx) : 47 x 30 x 23mm/ 1.9'' x 1.2'' x 0.9'' (L*H*Head Dia.)
• RoundThread Body Size : 18.5 x 17mm/ 0.7'' x 0.67" (D* L);Flat Body Size : 46x15x2mm/ 1.8"X0.59''X0.08"(L*W*H)
• Weight : 107g
• Package Content : 2 x Cam Lock4 x Keys

User questions & answers

Question:	Will this fit a blue point tool cart
Answer:	Don't know. Not familiar wih this tool cart.
Question:	new tool box got home from home depot no keys
Answer:	Good replacement just adjust too the box
Question:	Just wondering if these 2 locks are keyed alike. Thanks
Answer:	No. They are not. Two keys per lock. Separate keys for each. Total 4 keys.
Question:	Is each set of keys unique
Answer:	Yes each set of keys are unique

Product description

Order multiple sets and all locks in the order will be keyed the same. SEE PICTURES FOR MEASUREMENTS The tubular cam lock is keyed alike (all keys to all the locks you buy will work with each on all of your locks). The key can be removed while unlocked or locked. Great for RV, cabinet, toolbox

• Fits up to 3/8" (9.5mm) thickness
• Check measurements in photo to ensure which is correct lock for your needs
• Key is removable while locked and unlocked. Each lock comes with 2 keys.
• Order multiple sets and all cam locks in the order will be keyed the same. Keyed the same (all keys work with locks)
• Additional Cams can be ordered here - https://www.amazon.com/dp/B085G1GWXC

User questions & answers

Question:	do all the locks you sell have the same key? meaning that if you have sold 1000 of these are they all the same key
Answer:	Yes its okay i am 39 years old and its very adjust for middle of ages guys
Question:	What are the dimensions of the drive lug on the back? Based on the picture of the locking tab it appears to be 5mm x 5mm square but it's hard to tell
Answer:	Full Body workout
Question:	Turn right or left
Answer:	No, meters.
Question:	Will one key open any of the 5 locks
Answer:	Max user weight is 300 lbs

Product description

7 Pin Tubular Cam Lock - 7/8" Cylinder Length The Tubular Cam Lock (sometimes called the ace cam lock) has a 7/8" cylinder length and can accommodate material thickness up to 5/8" thick. The 1-1/4" cam can be installed at the 12, 3, 6 and 9 o’clock positions with a 90 degree turn. The stop cam is reversible so that the lock key can either be turned to the right or left to open. The cylinder diameter is standard at 3/4". The small cam lock is constructed of zinc alloy and is chrome plated. The hex nut, cam, screw and keys are all steel with chrome plating. Secure Keyway The tubular cam lock is keyed alike (all keys to all the locks you buy will work with each on all of your locks) with 7 pin security. It is also non-key retaining - The key can be removed in the locked and unlocked positions. Included In The Box Tubular Cam Lock Two Keys Cylinder Nut 1-1/4" Cam and Cam Nut Accessories The locks are compatible with dual hole cams. Go to to see more cabinet lock accessories. Applications Furniture Electronics Enclosures HVAC Industrial Enclosures Industrial Equipment Medical Cabinets and Equipment Recreation Vehicles Transportation Vending POS Replaces Any Current Cam Lock Application (KEY Code Number 0103)

• The lock cylinder can fit a material thickness of up to 5/8". It is a standard sized cam lock with 3/4" diameter. (see diagram for a more detailed picture).
• Westway Locks 7/8" tubular cam locks (sometimes called the ace cam lock) are keyed alike at 0103 with two keys per lock. Each key will fit with each lock that you purchase.
• The lock's versatility allows it to be installed in multiple positions. The cam can be installed on the lock at the 3, 6, 9, or 12 o'clock position and opens with a 90 degree turn.
• Ships with reversible stop cam and is non-key retaining, allowing you to remove the key from the locked and unlocked position.
• Cam lock ships with two keys, a steel cylinder nut, stop cam, 1 1/4" cam (latching part) and cam nut. It is constructed of zinc alloy and is chrome plated. Please refer to the diagram for more details on dimensions.

User questions & answers

Question:	Will this fit a pinball machine
Answer:	Hi, we have a limited 1 year warranty for our products. For other concerns and inquiries kindly call our Technical Support Department at 718 535 1800 Press 2 then 1 from Monday to Friday 9 AM to 5 PM EST. Thank you.
Question:	If I order 3 locks, will they all be keyed alike
Answer:	Yes. It has calorie, time, strokes and meter count
Question:	If I order 8 of these locks how many keys will I get
Answer:	very well when the proper technique is used. Focus doing the work portion using the legs keeping the arms more like hooks until the very end
Question:	If I order 3 locks will anyone else have the same keys
Answer:	100% made in the USA, in Vermont. The machines are assembled there by hand

Product description

This 1-3/4" long cylinder lock is ideal locking false-front drawers and cabinet doors made of stock up to 1-1/2" thick. The lock has a five disc tumbler and is available in a nickel, antique brass, or brass finish. Available keyed alike or keyed differently. Includes two cams: one for lipped applications and one for flush or overlay applications. The provided stop washers can be used to set the lock for a 90 or 180 degree cam turn. Technical Details Available in nickel, antique brass, or brass finish Includes two cams and two stop washers Two keys and mounting hardware included Use with up to 1-1/2" thick stock Requires 3/4" through hole See Tech Document (below) for complete dimensions

• 1-3/4" Long Cam Lock
• Keyed Same with 2 keys each
• Antique Brass Finish
• 1-7/16" Maximum Material Thickness

User questions & answers

Question:	which part of the p/n identifies they keying? i need " different" keys
Answer:	Dear customer, This rower is suitable for height under 6'45''.
Question:	If you purchase 4 are the key sets interchangable? Will one key open all four
Answer:	Dear customer, The Maxkare Magnetic & Air Dual Resistance Foldable Rowing Machine is manufactured in China.
Question:	Does this come with 2 locks keyed alike
Answer:	Hi WE have 2 version's of the rower, this has 10 Resistance levels and has a nicer design Both are air + magnetic system Thanks
Question:	Can I remove the key in the "unlocked" position? I'm referring to full turn positions as "locked" and "unlocked
Answer:	I am pleased with the structure of the machine. However, I do agree the top resistance is too light especially for the maximum recommended weight for this machine.