14 best stone shower floor sealer
A stone shower floor sealer is a type of protective product used in the field of home improvement and maintenance.It is specifically designed to seal and protect natural stone shower floors, preventing water damage, staining, and other issues. Here's what you should know about stone shower floor sealers:
Purpose: The primary purpose of a stone shower floor sealer is to create a protective barrier on the surface of natural stone tiles, such as marble, travertine, slate, or granite, commonly used in shower floors. This barrier helps to repel water, moisture, and other substances that can cause damage or staining to the stone.
Waterproofing: Stone shower floors are highly susceptible to water penetration, which can lead to issues like mold growth, efflorescence (white mineral deposits), and erosion of the stone over time. A sealer acts as a waterproofing agent, preventing water from penetrating the stone surface and causing these problems.
Stain Resistance: Stone sealers also provide stain resistance by blocking the absorption of liquids that might otherwise leave stubborn stains on the stone. This is particularly important in shower areas, where soap, shampoo, and other products can spill and leave marks.
Enhanced Appearance: In addition to protection, stone shower floor sealers can enhance the natural beauty of the stone by enriching its color and texture. This can make the stone tiles look more vibrant and appealing.
Types of Sealers: There are various types of stone sealers available, including penetrating sealers and topical sealers. Penetrating sealers are absorbed into the stone and provide protection from within, while topical sealers create a protective film on the surface. The choice of sealer depends on the type of stone and the desired level of protection.
Application: Applying a stone shower floor sealer typically involves thoroughly cleaning the surface, allowing it to dry, and then evenly applying the sealer according to the manufacturer's instructions. It's essential to follow the recommended drying and curing times for the best results.
Maintenance: Stone shower floor sealers are not permanent and may require reapplication over time, depending on factors like usage and exposure to water. Regular maintenance and resealing can ensure the continued effectiveness of the sealer.
Safety: When working with stone sealers, it's important to follow safety guidelines, including proper ventilation and using personal protective equipment as recommended by the product manufacturer.
Using a stone shower floor sealer can help extend the lifespan of your shower floor, maintain its appearance, and prevent costly repairs. Be sure to choose a sealer suitable for the type of stone you have and follow the manufacturer's instructions for the best results.
Below you can find our editor's choice of the best stone shower floor sealer on the market- ✔ PROFESSIONAL STRENGTH GROUT & NATURAL STONE SEALER: Used by professional tile & grout cleaners throughout the country.
- ✔ WATER BASED SEALER: Virtually no odor at all, Penetrates deep into the grout or stone without changing the look of the surface at all.
- ✔ VERY EASY TO USE: Apply while standing up, Just apply with a paint brush taped to a broom pole, let sit sit for 5 minutes, then mop the remaining sealer off with a clean mop. Easy and Quick!
- ✔ VERY LONG LASTING FORMULA
User questions & answers
Question: | Do you have to keep the sealer off of glass? I make a glass mosaic using grout for a backsplash and I don't want to ruin the glass |
Answer: | I don't know. Likely not if the color isn't on the surface. Test it on a small area. |
Question: | I've applied 4 coats but the grout is still absorbing water. Does this mean i need additional coats? It beads initially |
Answer: | I don’t think this product is supposed to create an impenetrable seal that water can’t get into. My understanding is it’s supposed to protect it from stains not seal it totally. I could be wrong though. |
Question: | How do I use this on granite |
Answer: | You just pour on the counter top evenly, wait 5 to 10 minutes and then wipe off with a clean towel or microfiber cloth. If you want extra protection you can apply twice. |
Question: | can this be used on grout that has been painted with grout re-color |
Answer: | No. If your grout has been painted with a color seal it will not need to be sealed with any grout sealer. Grout color seals put a thin layer of "paint" on top of the grout that will not allow clear penetrating sealer to soak into the grout. |
Product features
Grout-eez Tile & Grout Cleaner
✔️ 2 IN 1 GROUT CLEANER: Removes the top layer of grease and grime then penetrates deep into the grout to remove set-in stains.
✔️ DESIRED RESULTS IN JUST MINUTES: With grout-eez all you have to do is spray it on your grout and wait for 5 - 10 minutes to start scrubbing away all the grease and grime and making your floor or shower look like new!
✔️ SAFE TO USE ON WHITE & COLORED GROUT: No matter what the original color of your grout is it will not damage or harm that, after using grout-eez and scrubbing you may even find out you didn't even know what the true original color was!
✔️ VERY LOW ODOR: This is a heavy duty grout cleaner used by professionals and the fact that is has very low odor when most of the products proffesonals use are extremly strong when it comes to smell is impressive.
✔️ MADE IN THE USA: All of Clean-eez cleaning products are made right here in the USA!
Grout & Natural Stone Sealer
✔️ PROFESSIONAL STRENGTH: Our Stone and grout Sealer work on sanded and unsanded grout. This Professional strength sealer improves durability and keeps a natural appearance to your grout. 1 quart will seal up to 500 sq ft of tile and grout. It can also be used to seal any and Natural stone.
✔️ WATER BASED SEALER: Virtually no odor at all. Penetrates deep into the grout lines providing a moisture barrier that will protect your grout from dirt and spills.
✔️ VERY EASY TO USE: You don’t have to get down on your hands and knees to seal your grout. Just take a paintbrush and tape it to a broom pole. Apply while standing up. Let the product sit for 5 minutes, then just mop the remaining sealer of using warm water and a clean mop.
✔️ LONG LASTING: easy to clean and long-lasting protection. ( We recommend using a Neutral PH cleaner to maintain your floors once they are sealed, this will prevent the sealer from breaking down, which will make your sealer last a lot longer).
Daily Floor Cleaner
✔️ MULTIPURPOSE USE: Daily-eez works on all Hard surfaces around your home! Safe to use on Hardwood Floors, Laminate, Tile, Marble, Vinyl. Travertine, Slate, and other Stone Floors.
✔️ AMAZING RESULTS: Daily-eez will remove spills, dirt, and dust from your floor. It can be used Daily, Weekly, or Monthly, whenever you like to clean your floors.
✔️ STREAK FREE: You will never see Streaks or Haze on your floors after you use Daily-eez. It is a Neutral PH cleaner so it won’t break down your sealer, on your tile and grout or Natural Stone.
✔️ EASY TO USE: Just spray on your floor and wipe away!
✔️ SAFE: Daily-eez is safe to use around children and pets.
✔️ MADE IN THE USA: Clean-eez products are all manufactured in the USA
Stain & Odor Remover
✔️ DESIGNED TO ELIMINATE ORGANIC STAINS & ODORS: Easily removes stains such as urine, feces, vomit, wine, blood, etc. It also removes odors from any surface you can think of like carpet, hardwood floors, garbage disposals, garbage cans, etc.
✔️ NEW TECHNOLOGY! PROBIOTIC & ENZYMES WORK TOGETHER: This new technology changes everything you ever knew about how to get rid of stains! The enzymes break down the stain as the probiotic eats it away! I like to think if it as if the enzyme is the fork and knife for the probiotic!
✔️ SAFE FOR CHILDREN AND PETS: This product is safe for kids and pets to be around, no harmful chemicals what so ever! So you can have the peace of mind of it not hurting anything or anyone, which to us is one of the most important things about this product!
✔️ MADE IN THE USA: All of Clean-eez cleaning products are made right here in the USA!
Granite Cleaner & Sealer
✔️ BEST IN STONE CARE: Our 24 OZ 2 bottle set of our Seal-eez & Shine-eez is the best care you can give your countertop or vanity! They are specifically designed to work together after you seal your granite, marble, or quartz countertop use Shine-eez you maintain your sealer to make it last the longest amount of time. Apply sealer annually
✔️ SEALER: Protects against all water & oil-based stains. It also will allow you to easily clean all types of foods, grease, wine, coffee stains, & soap scum!
✔️ CLEANER & POLISH: Our product adds depth & shine to your beautiful countertops along with cleaning your everyday spills and messes! Cleans Corian, slate, quartz, & marble vanities & Countertops
✔️ FREE: Comes with a free microfiber towel to apply your sealer & then use it to do daily cleanings and polishing to your stone!
✔️ MADE IN THE USA: Clean-eez products are all manufactured in the USA
Product description
Miracle Sealants 511 Impregnator is a penetrating sealer designed for the protection of all medium to dense porous surfaces. Forms a transparent layer strong enough to combat moisture and stains while allowing vapor release. 511 Impregnator does not alter the natural look of the surface following application. Provides water, stain and slip protection for interior and exterior tile and natural stone surfaces. Surfaces treated become harder and less slippery.
- For use inside or out on a variety of surfaces including sanded grout, ceramic tile, porcelain tile, glazed tile, stucco, travertine, marble, slate, granite, terrazzo and more to protect against water, stains and slippage
- Formula is oil and water resistant that creates an invisible barrier for protection
- Covers up to 500 square feet per pint
- Offers superior coverage, formulated to provide stain protection that is UV transparent and resists weather elements
- Easy application and will not yellow, safe to use around food prep areas
User questions & answers
Question: | Does this product off gas VOCs? I can’t seem to find an ingredient list |
Answer: | no |
Question: | How long for drying |
Answer: | 1 hour |
Question: | Can this product be used on Porcelaine tile |
Answer: | I don't see why you would want to -- marble and stone are porous so need sealant, porcelain is not, so shouldn't need it |
Question: | how do you clean up after |
Answer: | After a few minutes wipe off excess with dry cotton towel. If you miss any (like if it dries on polished porcelain tile) you can spray some sealer on it again and wipe it all off. Cleans up nicely. |
Product features
511 Impregnator Sealer
Use the professionals' trusted choice since 1983 to protect expensive stone, tile, brick and more. This innovative, easy-to-use sealer dries invisible and gets deep into surfaces while still allowing water vapor to escape. Ideal for use on a wide variety of stone types in kitchens, bathrooms, patios, driveways and other interior and exterior surfaces.
1. Prepare Surface
Thoroughly clean surfaces and remove any coatings or residue. For tough build-up, Miracle Sealants Miracle Heavy Duty Cleaner Acid Substitute is recommended.
2. Apply Sealer to Dry Surface
In a well ventilated area, use either Miracle Sealant Mira Brush applicator or a clean, lint-free cloth to apply enough sealer to wet the surface. Allow to stand for 3-5 minutes for full penetration.
3. Wipe Excess and Buff
After no more than 5 minutes, remove excess liquid and buff surface with a lint-free cloth. Do not allow sealer to dry on the surface.
Allow to Cure
Allow to dry 3-5 hours, until dry to the touch, before light foot traffic. For best results, keep treated areas dry and free from staining agents for 72 hours.
Protection You Can See
Tile, brick and stone are porous, meaning that they have tiny holes and ridges on their surfaces. Over time these ridges can retain moisture, leading to damage, or make it difficult to fully remove stains. The 511 Impregnator seals off these pores and creates a protective barrier that ensures the lasting beauty of counters, floors and more.
Seals a Wide Range of Surfaces
• Granite
• Travertine
• Quartz
• Stucco
• Slate
• Terrazzo
• Agglomerate
• Glazed Tile
• Ceramic Tile
• Porcelain Tile
• Polished Granite
• Polished Marble
• Sanded Grout
• Quarry Tile
Product description
Wet Look Sealer from Black Diamond Stoneworks seals and provides a beautiful gloss finish. Treating your pavers, stone, slate, concrete, brick, driveways and garage floors with WET LOOK SEALER will make them look and shine beautifully. WET LOOK STONE SEALER is the one product you will need for INTERIOR or EXTERIOR applications to beautify and protect. Wet Look Sealer provides excellent resistance to wear, chemicals, water and UV rays. Adds shine and protection to slate, natural stone, pavers and all other masonry surfaces! WILL NOT DARKEN SURFACE. Durable, clear and non-yellowing. Water clean-up makes Wet Look Sealer easy to use. Wet Look Gallon Covers approx. 600 sq Ft. Wet Look Sealer is a part of Black Diamond's STONEWORKS' line. This is our premium line of natural stone cleaners & sealers. They are designed to help you easily maintain and protect all of the surfaces in your home or business. STONEWORKS cleaners and sealers are designed to offer you the perfect combination of unequaled product performance and value! Made in the USA. Designed, Tested and Used by Stone and Tile care Professionals!
From the Manufacturer
Treating Your pavers, stone , slate, concrete or brick with WET LOOK STONE SEALER will make them look and shine beautifully. WET LOOK STONE SEALER is the one product you will need for INTERIOR or EXTERIOR applications to beautify and protect. Wet Look Stone Sealer provides excellent resistance to wear, chemicals, water and UV rays. Adds shine and protection to slate, natural stone, pavers and all other masonry surfaces! Does not darken stone. Durable, clear and non-yellowing. Water clean up makes Wet Look Sealer easy to use.
- BEAUTIFUL WET LOOK SEALER Works on exposed aggregate, stamped, colored or decorative surfaces
- WILL NOT SIGNIFICANTLY DARKEN MOST SURFACEs when it dries. Does not look like you sprayed water on it. Resists chemicals and oil, Durable, Clear & Non-Yellowing.
- PLEASE READ COMPLETE PRODUCT DESCRIPTION: Not for polished GRANITE OR MARBLE
- SPRAY, BRUSH OR ROLL on concrete, pavers, slate, driveways, garage floors, patios, masonry, brick warehouse floors
- MADE IN THE USA. Professional Results VERY low odor dries in hours.
User questions & answers
Question: | After applying, how long do i have to wait before i can cut my tile |
Answer: | 24-48 Hours. |
Question: | fire pit sealers for hi heat |
Answer: | I'd have to say no on that one. It could probably take a little heat but anything close to direct flames, forget it. |
Question: | My intent is to use this at an entry door, I live in Seattle, will this make the stone slick |
Answer: | I don't know for sure, but with the way it looks and feels on my table, I would think that yes, it will make the stone slick. |
Question: | How do you apply it? Brush, spray bottle, pesticide spray hose etc? I'll be using it for about 30 stones approx 7"x |
Answer: | We applied it to a slate floor with a wool pad applicator, made for applying floor finishes. Worked well. We were going to use a paint roller, but since the instructions didn't mention that in its list of ways to apply, I was worried it may create bubbles or cause problems. The instructions do list a pad applicator, paint brush, or low presure sprayer. The consistemcy out of the bottle is about like skim milk, or watered down Elmers glue. Dries within an hour, pleasant smell, easy to work with. Did 3 coats. We are extremely pleased with the results. |
Product description
Black Diamond's Nex-Gen Sealer is the finest quality oil and water repellent available. Using this product will keep all your natural stone looking new for years to come. Nex-Gen Stone Sealer gives you the confidence your stone is protected. This product is so easy to use and because it is water-based and low odor so you can seal your natural stone without smelling up the whole house and neighborhood. Just spray it on and dry it up. It is that easy. It bonds to the stone and repels water and oil-based contaminants from absorbing in, yet it allows the stone to breathe. Nex-Gen Stone Sealer is a part of Black Diamond's STONEWORKS' line. This is our premium line of natural stone cleaners & sealers. They are designed to help you easily maintain and protect all of the beautiful stone and tile surfaces in your home or business. Made in the USA
- EASY TO USE GRANITE SEALER Long Lasting Protection- Professional Results Spray it on and wipe it up!
- PROTECTS YOUR GRANITE against oil, coffee, food, wine, grease, ink and germs
- NON-TOXIC, NON –CORROSIVE IMPREGNATOR Designed, Tested and USED by stone care professionals SAFE FOR FOOD CONTACT, Water-Based Can be used interior or exterior
- LOW ODOR SEALER FOR GRANITE, stone, concrete, grout and concrete. Apply Sealer let it penetrate and just wipe off excess – so easy to do!
User questions & answers
Question: | How long does it seal the stone |
Answer: | I use it for our pool coping and do it every six months to be safe. Depending on where it is applied it may last longer than that. |
Question: | Is the the best sealer to use on Carrara Marble that has not been sealed in awhile and has some yellowing |
Answer: | This sealer is great on marble IF you want a glossy coat. I had to do small areas at a time to get a smooth surface, it takes a long time to dry hard enough to walk on. (12 hrs+) |
Question: | I’ve been using black diamond granite sealer for my counter tops. looking for a refill size to use in the 16 oz bottle. would this product work |
Answer: | Yes! The same sealer is in each of those sizes. |
Question: | how long is this supposed to last |
Answer: | One year. |
Product description
GlazeGuard gloss sealer is a two component, professional grade highly durable water based sealer with extra slip resistance adhesion properties. This lab tested product has been specially developed for sealing ceramic, porcelain and stone tile surfaces. It's easy to apply to achieve a professional appearance for most commercial and DIY projects. GlazeGuard UV stable and completely resistant to abrasions and a very wide range of chemicals. Available in high gloss, satin and matte finishes.
- Commercial grade water based ceramic, porcelain and stone tile surfaces
- Reduces floor care costs, maintains clear gloss look and UV stable
- Slip and chemical resistant, VOC compliant, excellent abrasion resistant & environment safe
- For bathrooms/restrooms, kitchens and dining areas, lobby and hallways, stairs and entrances
- Tile & grout surface, floors & walls, ceramic & porcelain, stone & concrete
- Approximately 500ft²/gallon (12.2 m2 /liter) depending on the size density and porosity of the grout joints
User questions & answers
Question: | How do I clean the brush and roller afterwards? Simply rinse with water? And how to dispose of leftover product |
Answer: | This should seal any grout. |
Question: | Can you put it on peel and stick tiles |
Answer: | This should last 1-3 years depending on traffic and the types of cleaners used to maintain it. |
Question: | Can you use a steam cleaner on the porcelain tile once glazeguard is applied |
Answer: | I put some on my quartz countertop in an inconspicuous spot. No damage. Put it on grout between travertine back splash and quartz and I didn’t see any marks. |
Question: | Does this product have waterproofing properties? Can it be used in a ceramic tiled shower |
Answer: | The cleaner is great. Don't know the sealer. |
Product description
An all purpose impregnating sealer for Marble, Granite, Travertine, Tile and Grout. It offers superior stain protection against oil and waterborne stains. Non-Flammable and safe for food preparation surfaces.
- Solvent Based & VOC Compliant
User questions & answers
Question: | Does "solvent based" mean "oil" based? is the product "thin" or "thick" liquid? not been happy with latest water based sealer |
Answer: | Yes. One great, but sadly thin, pair. |
Question: | How often should the sealer be applied to granite countertops |
Answer: | Mens |
Question: | what does granite that was leatherd mean |
Answer: | From the Lorpen website for product CIW: Contents - 75% Merino, 15% Nylon, 10% Ea. LYCRA®. I normally do not tolerate nylon well, but these liners (Thin and intended to be worn beneath another pair of socks) keep my feet both warm and from overheating. Another note on sizing: I wear Men's 11 normal width (D) and size Large fit snug/tight without binding. |
Question: | Does this seal marble well |
Answer: | Never had any lint |
- IN STOCK-SHIPS FAST: Less Cleaning And More Living. Seal It Green Xtreme Grout Sealer Makes Cleaning A Breeze By Blocking Black Spot Stains And Dirt And Grime. No More Ugly Shower Or Kitchen Grout, Granite, Marble, Stone Or Tile
- SEALS & PROTECTS GROUT, GRANITE, TILE, MARBLE & NATURAL STONE. For Use In Kitchens, Bathrooms, Showers & Outdoor Living Areas. Preserves The Natural Look And Makes The Surface Bulletproof To Stains
- NON-TOXIC-NO TOXIC SOLVENTS, FUMES OR FLUOROPOLYMERS. Zero VOC's And Water Based With Plant Based Surfactants. Professional Formulation
- INDOOR/OUTDOOR TREATMENT. Easy To Apply Spray On. UV Resistant & Transparent. Protects Grout, Granite, Tile & Natural Stone In Showers, Kitchens And Out Door Living Areas. Unique Ingredients Will Never Yellow, Crack Or Peel. Or Your Money Back
- BRAND NEW TO AMAZON. In Stock And FAST Shipping. You Can Now Buy What The Pro's Use And Get The Results They Get. Easy DIY Spray. You Will Love The Results Or Your Money Back. COVERS UP TO 100 Square Feet
User questions & answers
Question: | How long do you have to let dry before use |
Answer: | As long as possible but At least 4 hours. |
Question: | Can this be used in reptile tanks? Im using sanded ground on a backboard for a gargole gecko and want to know if its safe for her to be on after it dr |
Answer: | Great question. After it dries it will permanently bond to the surface and not leach into the tank. It is important to apply it, let it completely dry and “cure” for about 2 hours. Then wipe the surface with a wet rag Or rinse with water if possible to remove any residual sealer. It is unlikely to harm the gecko even when wet however, we don’t test it for safety on all animal types. We use the same technology for testing freshwater fish tanks to keep them clean so it has undergone difficult to pass safety tests for aquatic life. One Side benefit of the technology is that it will help reduce or eliminate odors. |
Question: | Does this product use Rosemary |
Answer: | No it does not contain any rosemary. |
Question: | Does it permanently darken the grout |
Answer: | Great question. No. It is designed to not change the color or look of the grout or tiles. I would suggest however, to test it in a small area to ensure you like the results. |
Question: | I am grouting seashells into a design project. Can this be brushed over them while sealing the abstract lines |
Answer: | This should seal any grout. |
Question: | How long will this grout sealer last |
Answer: | This should last 1-3 years depending on traffic and the types of cleaners used to maintain it. |
Question: | Can this be used on travertine stone tile and sanded grout lines without damaging or etching the travertine |
Answer: | I put some on my quartz countertop in an inconspicuous spot. No damage. Put it on grout between travertine back splash and quartz and I didn’t see any marks. |
Question: | why is everyone reviewing the cleaner on the sealer listing? Anyone on the sealer |
Answer: | The cleaner is great. Don't know the sealer. |
Product description
Protect & Extend The Life Of Surfaces & Stone Pavements With StoneTech BulletProof Stone Sealer! A water-based formula with advanced, water-based fluoropolymers, our exterior stone sealer provides excellent resistance to water, oil and dirt without affecting the color of the stone. Apart from giving maximum protection against moisture and humidity, ceramic tile sealer also shields against the toughest of water, food and oil-based stains. Concrete sealer penetrates into the pores to seal the surface and form a barrier that protects against water absorption and stains. Grout sealer works as a sealant and pre-join that prevents moss and mold formation, protects against weathering as well as delicately enhances the appearance. Lasts up to 150% longer than regular sealers. Can be used on interior surfaces like showers, floors and countertops as well as exterior surfaces like patios, driveways, and paths. Suitable to use on all types of external masonry including artificial and natural stone, sandstone, limestone, slate, brick and concrete paving.Features:• No yellowing• Moisture repellent• Stain resistant• Protects against weathering • Suitable for interior and exterior use• Weather resistant• Easy to use• Provides coverage for up to 1,500 square feet• Advanced penetrating microbond protection
StoneTech BulletProof Sealer is an advanced sealer, designed to provide maximum protection on nature stone against the toughest oil and water-based stains. Always test in a small inconspicuous area with a 24-hour cure time to determine ease of application and desired results. Allow new grout installations to cure for a minimum of 72 hours prior to application. Make sure surface is clean and free of waxes and coatings. Sealer may be applied to damp surfaces one hour after standing water has been removed. Surface temperature should be between 50 °F and 80 °F (10 °C and 26.7 °C). Ensure that the area is well-ventilated during application and until the surface is dry. Keep children and pets out of the area until treated surface is dry. Expected wear is up to 5 years on interior surfaces and up to 3 years on exterior surfaces. Up to 900 sq. ft. of coverage per gallon for a single coat application. Includes: 1 1-Gallon (3.785L) BulletProof Sealer.
- Advanced sealer, designed to provide maximum protection on nature stone against the toughest oil and water-based stains
- Preserves natural look of stone for up to 5 years in interior environments and up to 3 years in exterior environments
- Formulated with advanced, water based fluoropolymers
- Provides coverage for up to 900 sq. ft.
- Recommended surfaces include: honed or textured marble, granite, limestone, travertine, sandstone, saltillo and bluestone
User questions & answers
Question: | Can this be used on smooth shiny granite countertops? In the product info they only recommend it for honed or textured surfaces, not polished surfaces |
Answer: | I used it on stone slate floors, a very porous surface, so I am not sure. It says "porous honed or textured granite." That is not shiny polished surfaces. The stuff has to soak in. I like it on slate because the slate looks natural without darkening it. I suggest contacting the manufacturer. There is a phone number on the back of the container 1-888-786-6343. The factory should be able to point you to the right product. I have shiny granite in my master bath. I used a sealer/polish once but after that a rag damp with water is all I need to wipe it down. My brother just uses a damp rag as well for his shiny granite. I do not know why people think granite is high maintenance. I think they like to sell a lot of sealer. |
Question: | The suggestion is to apply more than 1 coat. Can i apply the heavy duty kind first followed by the bulletproof to give it a little shine? Thank you |
Answer: | Hello Mauli, You can apply the heavy duty stone sealer followed by the bulletproof sealer from Stonetech. These 2 sealers, are called impregnating sealers. This means that these sealer fill the pours of the stone, these sealers will not affect the look of the stone. So unfortunately these sealer will not give the stone any shine at all. |
Question: | Does this have a gloss or matte finish? Is this non color enhancing |
Answer: | Gloss or matte finish? I would say neither. Once it is dry, the stuff is absolutely invisible. I put two coats on my new stone patio and anticipated some noticeable change. Nothing. You'll know it is there, however, when something capable of staining is eventually spilled. A little soap and water and the problem is solved. I saved the empty containers and marked them clearly with the application date. That way, I remember to order more every other year because the sealer is invisible and gives no hint that it is worn or fadding. |
Question: | Can I keep the unused sealant for reuse a year later |
Answer: | Yes. If stored at room temperature, has a shelf life of 2 years. Our experience shows us even longer. |
Product description
Unique, extra strength stain protector for porous natural stone and grout. Tuff Duck is a penetrating sealer which leaves the natural finish unaffected. It delivers the maximum protection for natural stones. A single quart covers up to 200 square feet. Formulated with advanced, water-based fluoropolymers. Tuff Duck stone sealer by Rocklinite Labs is specially formulated to protect against the toughest oil and water based stains. The sealer is compatible with marble, granite, limestone, slate, terrazzo, travertine, sandstone and other porous stone surfaces.
- Maximum protection for Granite, Grout, Marble, Travertine, Limestone, Slate, and even Concrete!
- Penetrating sealer will not affect the natural appearance of your delicate stone tile
- Twice the active ingredient as StoneTech to ensure proper protection with a single coat
- Protects up to 5 years on interior surfaces and 3 years on exterior surfaces
- Non-Acidic formula provides coverage for up to 200 square feet
User questions & answers
Question: | Do you have to wait a certain amount of time before sealing a newly installed marble floor |
Answer: | All you need to do is make sure the grout is fully cured.. Normally 8-10 hrs should be sufficient .. The grout lines should look fully dry. Thanks for your question! |
Question: | I already have silicone (clear) applied around the perimeter of the shower floor. will this sealer break down or discolor the clear silicone? thx |
Answer: | I have clear silicone around my shower and it did not discolor or breakdown. |
Question: | what are the directions for use on marble |
Answer: | Thanks for your question Quicksand!Unlike Granite, Marble can be readily etched when it comes in contact with Acids. Tuff Duck is Neutral to Slightly Basic and will not etch Marble. The application instructions for Marble do not differ for Granite or Slate etc.. The difference will be the degree of porosity (or how porous) the stone is. A more porous stone will absorb more sealer than a non-porous stone. In general, marble is more porous than Granite. The directions for marble are as follows:1) Ensure a clean and dry surface, 2) Apply sealer liberally and allow to penetrate for 15 minutes (ensure the surface stays wet during this soaking period, more sealer may need to be applied during this time depending on the porosity of the stone) 3) After 15 minutes wipe up the residual sealer with a clean dry cloth.4) If any sealer was unintentionally allowed to dry on the surface leaving streaks, simply use Tuff Duck sealer on a cloth to re-wet/dissolve the streaks and dry with a cloth.The surface can come in contact with water after 6 hrs of cure time and will be fully cured in 24hrs.Thanks, I hope this helps. |
Question: | Hello. is this a penetrating stone sealer |
Answer: | Hi there Lucy , yes Tuff Duck is indeed a penetrating sealer versus other sealers which would be called film-forming. Tuff Duck penetrates into the stone sealing the pores and the chemistry ensures a very high level of hydrophobicicity, or the ability to repel liquids ... You can see this by dripping water onto the sealed surface .. The water will bead on A surface sealed with Tuff Duck. Also Tuff Duck will not alter the natural look or Finish of the natural stone! -thanks for your question ! |
Product description
Uses
STONE+ is a sealing and joint stabilizing product with a Low-Gloss to No-Gloss finish which enhances the natural color of surfaces. This product can be applied to clay pavers as well as natural and faux stone, travertine, and vertical surfaces. This water-based formula provides a high quality alternative to traditional solvent-based sealers, forming a durable barrier that defends against oil, food, and other stains.
Features
One-part formula allows for ease of use and minimal cleanup. STONE+ is breathable allowing it to be applied to damp surfaces (without standing water), while also allowing efflorescence and moisture to escape from pavers. An industrial grade UV protection additive defends surfaces from the damaging effects of the sun, while the Low VOC (Volatile Organic Compounds) content exceeds all federal, state, and local regulations.
USDA Certified Bio-Based
Black Diamond Coatings is 1 of 5 companies in its respective category to that receive this status. In order to meet the criteria, a product must contain at least 11% renewable resources from agricultural, marine, or forestry materials. Black Diamond Coatings STONE+ has 50% Bio-Based Materials, more than 4 times the requirement. This is in an effort to reduce dependency upon petroleum based products.
Application
Generally, apply one coat of sealer to clay or stone surfaces. It is recommended to use a high pressure sprayer with a fan tip. Ensure smooth application of sealer. If product puddles or drips on the surface, back-roll to smooth out excess product for even coverage. DO NOT FLOODCOAT. Coverage is up to 400 sq. ft. per gallon per coat. Please visit our website for detailed application instructions, Technical and Safety Data Sheets, video demonstrations and other helpful information. Made in the USA.
- Keep a clean, WET LOOK, LOW GLOSS FINISH and improve the LONGEVITY of your outdoor stone, clay pavers, faux stone and travertine; not to be used on submerged surfaces
- EASILY MAINTAIN your exterior surface with our incredible UV PROTECTION. The film forming sealer guards against spills and moisture.
- BREATHE EASY when applying this sealer due to NO FOUL ODOR and LOW VOCs as so many reviews have noted
- Your money goes farther with this product! AMAZING COVERAGE RATE up to 1,000 square feet per gallon (typically one coat), and long lasting protection
- EASY SPRAY ON APPLICATION using our included Application Guide and available Application Videos
User questions & answers
Question: | I have a pool deck with tine pebbles that are starting to break loose. What product of yours can I use to seal and keep the pebbles from coming loose |
Answer: | Dear valued Amazon Customer, The 12" model comes with a basket, bell, cute handelbar bows and training wheels. If you have additional questions or need replacement parts under warranty for the Royalbaby Jenny & Bunny Girl's Bike- call us at 1-877-BIKEAID (245-3243) and we would be pleased to assist. Thanks and best! |
Question: | We have a slate bathroom. about 500 ft.² w/ -all shower walls, flooring, tub surround. would you use this or the other bd stoneworks wet look sealer |
Answer: | For that height, which is similar to our daughter's, there 14' is the size to grow into. A 16" is Too big and she won't be able to handle it, just go to any Academy with her and try (that's all they sell). This 14" has been a perfect bike for our "little daughter (40" - 5 Years old), the seat goes way down and we feel she'll get a few years out of it. The bike is sturdy, and quite frankly she can go a little fast but we don't worry too much with it's handling. Hope this helps. The only other place I found 14" bikes was Toys r Us and the reviews were not good, so we are pleased! |
Question: | How well does this product guard against mold and mildew |
Answer: | 18 inch bike could be a perfect size for her. |
Question: | I have a small lava rock wall approx 6x9’Would the 16oz bottle be enough |
Answer: | Dear valued Amazon Customer, For replacement parts under warranty, directly contact us at 1-877-BIKEAID (245-3243) or email us at [email protected] and we would be pleased to assist. Thanks and best! |
Product features
Before and After STONE+
You can see how the STONE+ sealer restored the faded colors and gave it a clean medium gloss finish. Not only is it aesthetically pleasing, it has now been protected from future weathering.
Before and After STONE+
You can see how the STONE+ sealer restored the faded colors and gave it a clean medium gloss finish. Not only is it aesthetically pleasing, it has now been protected from future weathering.
After STONE+
You can see how the STONE+ sealer restored the faded colors and gave it a clean medium gloss finish. Not only is it aesthetically pleasing, it has now been protected from future weathering.
Why do I need these supplies?
- The sprayer will help distribute the product more evenly on the surface. Any sprayer will work for our products, although high pressure sprayers will allow higher coverage rates.
- The roller should be used to back-roll any puddles or drips, and to smooth the sealer in textured areas. If you’ve re-sanded the paver joints, ensure that the sand is 1/8” below the top of the paver surface to avoid pulling it up on the roller.
- The extension pole will be used to attach to the roller handle and roller nap. This will allow you to roll onto the surface without bending over.
- The tape will be used to secure the protective paper or plastic on areas that you don't want the sealer to enhance, such as your doors, garage door, garden, ect.
- The protective paper (plastic or paper) will be used to block off the areas where you don't want sealer to be applied.
Product description
PROTECT YOUR CONCRETE INVESTMENTS WITH H2SEALS To extend or to renovate? We know that investing on concrete structures, be it your house or an office or a new business, will definitely cost you a lot. With that in mind, Serveon Sealants developed an all-purpose stone sealer that guarantees to stain proof your investments to the optimum level possible. H2100 is a premium grade stone sealer that revolutionizes water repellent technology plus breaks down water and other substances that come in contact on the treated surfaces. It is created at great advantages over the other brands: it's cost-efficient and easy to apply. Treated surfaces are protected from discoloration, thus conserving their natural look for 3 to 5 years. The application is limitless: garage floor sealer for carports, brick sealer for patios and pathways, limestone sealer for decorative walls, grout stone sealer for pool decks.
- PROLONGS STONE LIFE AND RETAINS NATURAL LOOK: H2Seal's outdoor stone sealer provides an impenetrable barrier from moisture and saltwater while discouraging many stains and preventing efflorescence. Thanks to Serveon's highly-effective stone sealer, you'll have more time relishing your decorative outdoor landscapes.
- USES BREAKTHROUGH CROSS-LINKING TECHNOLOGY: H2Seal's grout stone sealer is an advanced siliconate water repellent technology. This allows H2Seal to penetrate deep into the grout while creating lasting optimum protection by forming a powerful water repelling matrix on the surface.
- ALL PURPOSE EASY TO APPLY SEALER: It is a one-sealer that fits all. Unboundedly, you can use it as a flagstone sealer for pool decks and patios, a pavers sealer for walkways or a travertine sealer for garden paths. You name it; H2Seal has it covered!
- CONVENIENT AND ECONOMICAL: Easy to apply, unrivaled in the market, the H2100 concrete sealer deeply penetrates surfaces providing powerful protection including preventing efflorescence and salt water erosion. Fast-acting, it makes your facade ready in an hour or less! This all-purpose, inexpensive stone sealer gives 3 to 5 years of protection and yields maximum coverage per gallon (up to 450 sq. ft. per gallon).
- PREMIUM QUALITY PRODUCTS: Serveon Sealants is committed to delivering the highest performing sealants using state-of-the-art formulations and breakthrough, cross-linking technology. H2100 provides superior water repellant protection to water based silane and siloxane sealers.
User questions & answers
Question: | Does it set or keep t h e sand in place that is between the pavers |
Answer: | Thanks for your very fundamental question that’s a more critical element for undergarments than any outerwear or accessory consideration. Why? Caution should be exercised when not only looking at the yarns used, but in what proportion. When considering socks and other undergarments, many believe the maximum amount of nylon permitted in any of the itemsS should be <=20% as nylon aggressively promotes the growth of bacteria regardless of any proportion of yarn containing either silk and wool, significantly defeating the naturally occurring anti microbial protection that either of the latter natural yarns may offer depending on the dyes used,s source & processing used. Hope this helps, AX- |
Question: | For outdoor patio with Travertine pavers. Is silicate sealant superior to silane/siloxane sealants |
Answer: | These socks fit comfortably over my calves. I have large calves as well. |
Question: | Can I use this after I sand bathroom tile thats in the shower |
Answer: | Sock size Large fits Mens Shoe 9-13. |
Question: | How is this product actually applied (roller, spray, etc |
Answer: | Yes. They are very thin and I've worn them hiking in the summer. I wear them under thick socks in the winter. |
Product description
Miracle Sealants high-gloss finish sealer enhances the natural beauty of all flamed, sandblasted, split faced, tumbled and textured surfaces with a durable high gloss coating. Use with a penetrating sealer for maximum protection and a non-yellowing finish on interior Saltillo, terra cotta, porous unglazed tile and other surfaces. High-gloss finish sealer provides superior surface resistance and a strong shine on even hard to coat surfaces. Formulated for indoor use only.
From the Manufacturer
Mira Shine is formulated for interior use as a high gloss surface sealer. The combination of Mira Shine with the appropriate Miracle Sealants penetrating sealer provides durable protection.
- Designed to enhance the natural color of interior floor surfaces
- Low VOC, water-based, odorless formula offers superior scuff and wear resistance
- Covers up to 200 sq. ft. per quart and dries to the touch in 1-5 hours
- Easy to use, UV transparent protective coating resists stains
- High gloss sealer provides a beautiful, low maintenance shine that will not yellow
User questions & answers
Question: | Can I use this product on granite countertops in my kitchen |
Answer: | They are warm and thin. Best liners for winter. |
Question: | Will this work on marble floors? Is is safe for pets |
Answer: | I always wear a pair of thin nylon socks under a pair of heavier socks, when I wear my work boots. The Danish Endurance socks work well for me as the heavier socks. The Danish Endurance socks are not extremely thick and they are not scratchy, so they would be fine for summer. |
Question: | Can I use this on matte porcelain tiles |
Answer: | Probably, depending on humidity and wind conditions. Under normal use you will probably not need to wash these daily. I purchased these a year ago and I can get several days of hard wear out of a pair without then feeling or smelling funky if I hang them and let them air out for a few hours. These socks have shown very little wear and teqr after a year of use. Far from a “dumpster fire”. |
Question: | I used your Miracle Porous Plus Sealer to reseal my saltillo tile floors. Can I now use the Miracle High Gloss Finish Sealer over it for glossy look |
Answer: | Get the smaller size. These are Euro sized and the US conversion on the chart is confusing. A size 42EU is size 9 US or 8.5 on some charts. I am a 9 US and a 42EU and the smaller size fits perfectly. |
Product features
Miracle Sealants High Gloss Finish Sealer Color & Gloss Enhancers, Quart, Clear
High-Gloss Finish Sealer is a unique water-base product designed to enhance the natural color of all flamed, sandblasted, split faced, tumbled and textured surfaces. When used with one of our penetrating sealers, High-Gloss Finish Sealer seals and protects while leaving a beautiful, low maintenance, color enhanced high-gloss sheen. High-Gloss Finish Sealer offers a scuff and weather resistant surface that will not yellow.
SPECIAL FEATURES:
- Interior Only
- Easy-to-Use
- U.V. Transparent
- Non-Yellowing
- Low VOC
- Superior Coverage
Product description
Every MORE Surface Care product is formulated specifically for natural stone, ceramic & porcelain, grout and concrete surfaces. Avoid the industry standard of harsh sealers full of chemicals and explore MORE’s product line designed for safe, simple and effective use. Our Premium Stone Sealer is a water based formula created to deliver elite stain protection. The polymers in the formula bond within the pores of the stone and create a long-lasting, invisible barrier against oil and water based stains. For best use, surface should be dry and be between 50℉ to 80℉ (10℃ to 27℃). Enjoy pro grade surface protection and improved air quality with a safer, more natural stone sealer.
- Experience a new, safer level of surface care without sacrificing quality or results.
- Professional grade marble, granite and stone sealer creates a tough barrier against stains.
- Easy application for your natural stone surfaces and safe for food contact areas.
- For most surfaces, apply liberally and evenly and allow 15 minutes to absorb.
- MORE Surface Care products are manufactured and distributed in the USA.
User questions & answers
Question: | Is the product sprayed on granite |
Answer: | The socks are mid calf. |
Question: | Would this work good on travertine pavers? If so, how many sf would a galon cover |
Answer: | These go up to mid calf on me. I'm 5'6". Depending on your height and legs, these might work for you. |
Question: | Do you have to be certified to apply for 20 year warranty |
Answer: | The socks are thin but not constricting. |
Question: | can this product be used on icestone |
Answer: | Yes. I use them as 2nd very important layer for winter running |
Product features
MORE Surface Care for Your Natural Stone
You Needed It. We Made It.
You’ve put a lot of thought, time, and money into the design of your home. MORE Surface Care helps you protect that investment by enhancing your natural stone. It may look as hard as rock, but it is still porous enough that any minor spill will stain your stone for years to come.
Simple. Safe. Effective.
Natural Stone Color Enhancer
Enhances your stone’s natural color and texture, then seals and protect – all in one step. Excellent stain protection. For indoor or outdoor use.
Grout, Ceramic, and Porcelain Sealer
Creates an invisible barrier to protect grout, ceramic, and porcelain from oil and water-based stains. Keeps grout looking new.
Cleaner and Protector
Gentle enough for every day use. Subtle peppermint and thyme scent leaves your rooms fresh and clean.
MORE Surface Care
We’ve spent years in the natural stone industry. We knew we could make products that were safer, more effective, and easier for your family to use. We recommend sealing and protecting your countertops, tiles, floors, and surfaces regularly to preserve their beauty.
Product description
Miracle Sealants 511 Porous Plus is a penetrating sealer designed for the protection of the most porous surfaces. Forms a transparent layer strong enough to combat moisture and stains while allowing vapor release. 511 Porous Plus does not alter the natural look of the surface following application. Provides water, stain and slip protection for interior and exterior tile and natural stone surfaces. Porous tile and porous stone surfaces treated become harder and less slippery.
From the Manufacturer
511 Porous Plus is a penetrating sealer designed for the protection of the most porous surfaces. 511 Porous Plus forms an invisible barrier that is resistant to moisture and stains while allowing vapor to escape. 511 Porous Plus is not a surface coating and will not alter the natural look. All surfaces are harder and less slippery.
- For use inside or out on a variety of surfaces including sanded grout, flagstone, terra cotta, limestone, sandstone and more to protect against water, stains and slippage
- Formula is oil and water resistant that creates an invisible barrier for protection
- Covers up to 500 square feet per pint
- Offers superior coverage, formulated to provide stain protection that is UV transparent and resists weather elements
- Easy application and will not yellow, safe to use around food prep areas
Product features
511 Porous Plus
Formulated for porous surfaces, Miracle Sealants 511 Porous Plus penetrates the surface of natural stones like travertine, limestone, slate to provide stain and water protection. Water vapor within surfaces continues to escape, which also makes this product suitable for additional interior/exterior surfaces like concrete, pavers, grout and tiles like Satillo. 511 Porous Plus dries invisible without altering the original look of the surface.
1. Prepare Surface
Thoroughly clean surfaces and remove any coatings or residue. For tough build-up, Miracle Sealants Miracle Heavy Duty Cleaner Acid Substitute is recommended.
2. Apply Sealer to Dry Surface
In a well ventilated area, use either a Miracle Sealant's applicator or a clean, lint-free cloth to apply enough sealer to wet the surface. Allow to stand for 3-5 minutes for full penetration.
3. Wipe Excess and Buff
After no more than 5 minutes, remove excess liquid and buff surface with a lint-free cloth. Do not allow sealer to dry on the surface.
Allow to Cure
Allow to dry 3-5 hours, until dry to the touch, before light foot traffic. For best results, keep treated areas dry and free from staining agents for 72 hours.
Protection You Can See
Tile, brick and stone are porous, meaning that they have tiny holes and ridges on their surfaces. Over time these ridges can retain moisture, leading to damage, or make it difficult to fully remove stains. The 511 Porous Plus seals off these pores and creates a protective barrier that ensures the lasting beauty of counters, floors and more.
Seals a Wide Range of Surfaces
• Granite
• Travertine
• Quartz
• Stucco
• Slate
• Terrazzo
• Agglomerate
• Glazed Tile
• Ceramic Tile
• Porcelain Tile
• Polished Granite
• Polished Marble
• Sanded Grout
• Quarry Tile
Latest Reviews
View all
Bamboo Nursing Pillows
- Updated: 26.07.2023
- Read reviews

Anker Pocket Projectors
- Updated: 16.02.2023
- Read reviews

Rosewill Fans
- Updated: 22.04.2023
- Read reviews

Hallmark Kids Costumes
- Updated: 04.05.2023
- Read reviews

Cpu Fan Controller
- Updated: 12.04.2023
- Read reviews