11 best stone sealers

Product description

Miracle Sealants 511 Impregnator is a penetrating sealer designed for the protection of all medium to dense porous surfaces. Forms a transparent layer strong enough to combat moisture and stains while allowing vapor release. 511 Impregnator does not alter the natural look of the surface following application. Provides water, stain and slip protection for interior and exterior tile and natural stone surfaces. Surfaces treated become harder and less slippery.

• For use inside or out on a variety of surfaces including sanded grout, ceramic tile, porcelain tile, glazed tile, stucco, travertine, marble, slate, granite, terrazzo and more to protect against water, stains and slippage
• Formula is oil and water resistant that creates an invisible barrier for protection
• Covers up to 500 square feet per pint
• Offers superior coverage, formulated to provide stain protection that is UV transparent and resists weather elements
• Easy application and will not yellow, safe to use around food prep areas

User questions & answers

Question:	Does this product off gas VOCs? I can’t seem to find an ingredient list
Answer:	no
Question:	How long for drying
Answer:	1 hour
Question:	Can this product be used on Porcelaine tile
Answer:	I don't see why you would want to -- marble and stone are porous so need sealant, porcelain is not, so shouldn't need it
Question:	how do you clean up after
Answer:	After a few minutes wipe off excess with dry cotton towel. If you miss any (like if it dries on polished porcelain tile) you can spray some sealer on it again and wipe it all off. Cleans up nicely.

Product features

511 Impregnator Sealer

Use the professionals' trusted choice since 1983 to protect expensive stone, tile, brick and more. This innovative, easy-to-use sealer dries invisible and gets deep into surfaces while still allowing water vapor to escape. Ideal for use on a wide variety of stone types in kitchens, bathrooms, patios, driveways and other interior and exterior surfaces.

1. Prepare Surface

Thoroughly clean surfaces and remove any coatings or residue. For tough build-up, Miracle Sealants Miracle Heavy Duty Cleaner Acid Substitute is recommended.

2. Apply Sealer to Dry Surface

In a well ventilated area, use either Miracle Sealant Mira Brush applicator or a clean, lint-free cloth to apply enough sealer to wet the surface. Allow to stand for 3-5 minutes for full penetration.

3. Wipe Excess and Buff

After no more than 5 minutes, remove excess liquid and buff surface with a lint-free cloth. Do not allow sealer to dry on the surface.

Allow to Cure

Allow to dry 3-5 hours, until dry to the touch, before light foot traffic. For best results, keep treated areas dry and free from staining agents for 72 hours.

Protection You Can See

Tile, brick and stone are porous, meaning that they have tiny holes and ridges on their surfaces. Over time these ridges can retain moisture, leading to damage, or make it difficult to fully remove stains. The 511 Impregnator seals off these pores and creates a protective barrier that ensures the lasting beauty of counters, floors and more.

Seals a Wide Range of Surfaces

• Granite

• Travertine

• Quartz

• Stucco

• Slate

• Terrazzo

• Agglomerate

• Glazed Tile

• Ceramic Tile

• Porcelain Tile

• Polished Granite

• Polished Marble

• Sanded Grout

• Quarry Tile

Product description

Spray, wipe and seal; it's that easy. This granite & stone sealer is professional-quality you can easily apply at home. It's specially formulated to protect stone surfaces from water and staining while allowing the stone to breathe and release moisture vapors. Directions: shake well before use. Always test a small area before using. For maximum protection the stone surface should be dry for 6-12 hours before sealing. 1. Clean stone surface with stone care international cleaner before sealing. 2. Cover areas that are not intended to be sealed. 3. Liberally spray entire surface until it is evenly wet. Do not SATURATE the surface. 4. Allow surface to begin drying for 3-5 minutes, wet the surface once more with the sealer to allow the sealer to properly penetrate and cure. 5. Wipe off excess sealer from surface after 30 minutes. If excess sealer dries onto the surface, spray more sealer onto the surface and wipe immediately with a clean, dry terrycloth towel. For more porous stones repeat steps 2-6 one hour after the first application.

• For use on all Solid stone surfaces including granite, quartz, Marble, limestone, Slate, grout and Slate
• Ammonia and phosphate Free and safe on food Contact surfaces
• Streak Free Formula in easy-to-apply spray bottle
• Superior coverage of 72 sq. ft. of 1 application
• Penetrating sealer which forms flexible molecular Links for strong protection - use at least every 6 months for best results

User questions & answers

Question:	For a marble table with glass mosaic in one spot, should I cover the glass mosaic or just use the sealer over it? i.e., it won't harm the glass
Answer:	This will not harm the glass, you will want to make sure to wipe the surface down really well after applying the sealer to remove any sealer that did not penetrate.
Question:	Can this be used to seal a white marble dining table
Answer:	Yes, you can use this product to seal a white marble dining table.
Question:	Can this be used on honed travertine? Dont want shine
Answer:	Yes, you can use this on honed travertine. This product will not change the overall look of the stone, it will just help protect it against staining.
Question:	Any experience with using this for a rough travertine tile shower
Answer:	You can use this product on rough travertine.

Product features

Ultimate Protection

Protect your stone counter top with Stone Care International's professional-quality granite & stone sealer. This product is formulated specially to protect stone surfaces from water and staining while allowing the stone to breathe and release moisture vapors.

Great for Multiple Surfaces & Areas

Stone Care International Granite & Stone Sealer is great to use on all solid stone surfaces including granite, quartz, marble, limestone, slate, grout and slate. Great for use on counter tops, floors, showers, vanities and fireplace surrounds. Covers approximately 72 sq. ft. for the trigger - 24 Ounce & 48 sq. ft. for the 16 Ounce bottle.

Select Your Favorite

Stone Care International also offers our Granite & Stone Sealer in convenient squeeze bottle for form for an easy application and maximum coverage.

• HIGHLIGHT AND DARKEN the natural beauty and character of unsealed surfaces.
• REJUVENATES THE COLOR and improves the appearance of weathered surfaces.
• LONG LASTING, easy to apply, and is suitable for both interior and exterior use.
• HELPS SEALS OUT WATER but allows moisture vapor transmission.
• ALWAYS TEST FIRST made in the U.S.A.

User questions & answers

Question:	I sealed my slate backyard with miracle 511 impregnator sealer last year, 1 coat only. Can I apply this product to darken my slate stone backyard
Answer:	When you spray water on the slate does it darken rapidly? If the water sits on the surface the Color Enhancer will not work. I would test the Color Enhancer in a small area to see if it darkens the surface. We see it in a sample size for that very reason.
Question:	Can this be used on expoxy rock
Answer:	If it is absorbent it will work
Question:	Can this be used on encaustic cement tiles prior to sealing
Answer:	This is an enhancer and a sealer so any sealer applied over it will most likely not adhere to it.
Question:	How much area does it cover
Answer:	It provided about 2.7 coats for my 100 square feet area. However, most of the shine and enhancer are now gone. A 0 -star product and a waste of money and time. I'd not recommend it for outside use.

Product features

Colors become more brilliant

Black Diamond Stoneworks is a company built on a philosophy of quality, value, and performance.

We believe in creating an environment you can be proud of, whether it’s in your home or your office. You should be able to achieve this without breaking a sweat and we are here to make sure of that!

Our range of premium products delivers results to exceed expectations.

If you want cleaning or color enhancing, we’ve got you covered to turn your idea into reality

Experience the Black Diamond Stoneworks promise today.

Product description

Miracle Sealants 511 Porous Plus is a penetrating sealer designed for the protection of the most porous surfaces. Forms a transparent layer strong enough to combat moisture and stains while allowing vapor release. 511 Porous Plus does not alter the natural look of the surface following application. Provides water, stain and slip protection for interior and exterior tile and natural stone surfaces. Porous tile and porous stone surfaces treated become harder and less slippery.

From the Manufacturer

511 Porous Plus is a penetrating sealer designed for the protection of the most porous surfaces. 511 Porous Plus forms an invisible barrier that is resistant to moisture and stains while allowing vapor to escape. 511 Porous Plus is not a surface coating and will not alter the natural look. All surfaces are harder and less slippery.

• For use inside or out on a variety of surfaces including sanded grout, flagstone, terra cotta, limestone, sandstone and more to protect against water, stains and slippage
• Formula is oil and water resistant that creates an invisible barrier for protection
• Covers up to 1,000 square feet per quart
• Offers superior coverage, formulated to provide stain protection that is UV transparent and resists weather elements
• Easy application and will not yellow, safe to use around food prep areas

Product features

511 Porous Plus

Formulated for porous surfaces, Miracle Sealants 511 Porous Plus penetrates the surface of natural stones like travertine, limestone, slate to provide stain and water protection. Water vapor within surfaces continues to escape, which also makes this product suitable for additional interior/exterior surfaces like concrete, pavers, grout and tiles like Satillo. 511 Porous Plus dries invisible without altering the original look of the surface.

1. Prepare Surface

Thoroughly clean surfaces and remove any coatings or residue. For tough build-up, Miracle Sealants Miracle Heavy Duty Cleaner Acid Substitute is recommended.

2. Apply Sealer to Dry Surface

In a well ventilated area, use either a Miracle Sealant's applicator or a clean, lint-free cloth to apply enough sealer to wet the surface. Allow to stand for 3-5 minutes for full penetration.

3. Wipe Excess and Buff

After no more than 5 minutes, remove excess liquid and buff surface with a lint-free cloth. Do not allow sealer to dry on the surface.

Allow to Cure

Allow to dry 3-5 hours, until dry to the touch, before light foot traffic. For best results, keep treated areas dry and free from staining agents for 72 hours.

Protection You Can See

Tile, brick and stone are porous, meaning that they have tiny holes and ridges on their surfaces. Over time these ridges can retain moisture, leading to damage, or make it difficult to fully remove stains. The 511 Porous Plus seals off these pores and creates a protective barrier that ensures the lasting beauty of counters, floors and more.

Seals a Wide Range of Surfaces

• Granite

• Travertine

• Quartz

• Stucco

• Slate

• Terrazzo

• Agglomerate

• Glazed Tile

• Ceramic Tile

• Porcelain Tile

• Polished Granite

• Polished Marble

• Sanded Grout

• Quarry Tile

Product description

Black Diamond Nex-Gen Natural Stone Penetrating Sealer: Seals & Protects; Granite, Marble, Travertine, Limestone, Concrete, Grout, Tile, Brick, Block & Slate Floors, Patios and Fireplaces, 16 Fl. OZ

From the Manufacturer

Nex-Gen Sealer is a premium stone & grout penetrating sealer. It penetrates deeply then bonds with natural stone or grout providing a long lasting natural looking barrier against water, oil, dirt and grease stains. Coverage approx 2 applications on an average size kitchen. Shake well before using. Surface must be clean and dry. Spray surface making sure you have complete coverage. After 1-3 minutes remove excess with dry towel. Dries in 2-5 hours.

• EASY TO USE GRANITE SEALER Long Lasting Protection- Professional Results Spray it on and wipe it up!
• SAFE FOR FOOD CONTACT, Water-Based Can be used interior or exterior
• PROTECTS YOUR GRANITE against oil, coffee, food, wine, grease, ink and germs
• LOW ODOR SEALER FOR GRANITE, stone, concrete, grout and concrete. Apply Sealer let it penetrate and
• NON-TOXIC, NON –CORROSIVE IMPREGNATOR Designed, Tested and USED by stone care professionals

User questions & answers

Question:	is this for concrete
Answer:	say it will work for concrete
Question:	how often do you use this product
Answer:	I have used Black Diamond Granite Sealer one time after installing our granite counter top 3 years ago. The Sealer was very easy to use....almost fun! The results were perfect! I would highly recommend it. I also use the Black Diamond cleaner almost everyday, Love that too!
Question:	How long the sealant stays on granite? Do we have to apply regularly? If so on what basis
Answer:	I was told eight hours to dry by the granite installers. As far as I know, I reseal the granite every six months, if it has been taken care of with granite cleaners when needed. Hope this helps
Question:	We have new light granite counter tops. Will the sealer darken or change the hue
Answer:	I didn't see any change.

Product description

Wet Look Sealer from Black Diamond Stoneworks seals and provides a beautiful gloss finish. Treating your pavers, stone, slate, concrete, brick, driveways and garage floors with WET LOOK SEALER will make them look and shine beautifully. WET LOOK STONE SEALER is the one product you will need for INTERIOR or EXTERIOR applications to beautify and protect. Wet Look Sealer provides excellent resistance to wear, chemicals, water and UV rays. Adds shine and protection to slate, natural stone, pavers and all other masonry surfaces! WILL NOT DARKEN SURFACE. Durable, clear and non-yellowing. Water clean-up makes Wet Look Sealer easy to use. Wet Look Gallon Covers approx. 600 sq Ft. Wet Look Sealer is a part of Black Diamond's STONEWORKS' line. This is our premium line of natural stone cleaners & sealers. They are designed to help you easily maintain and protect all of the surfaces in your home or business. STONEWORKS cleaners and sealers are designed to offer you the perfect combination of unequaled product performance and value! Made in the USA. Designed, Tested and Used by Stone and Tile care Professionals!

From the Manufacturer

Treating Your pavers, stone , slate, concrete or brick with WET LOOK STONE SEALER will make them look and shine beautifully. WET LOOK STONE SEALER is the one product you will need for INTERIOR or EXTERIOR applications to beautify and protect. Wet Look Stone Sealer provides excellent resistance to wear, chemicals, water and UV rays. Adds shine and protection to slate, natural stone, pavers and all other masonry surfaces! Does not darken stone. Durable, clear and non-yellowing. Water clean up makes Wet Look Sealer easy to use.

• BEAUTIFUL WET LOOK SEALER Works on exposed aggregate, stamped, colored or decorative surfaces
• WILL NOT SIGNIFICANTLY DARKEN MOST SURFACEs when it dries. Does not look like you sprayed water on it. Resists chemicals and oil, Durable, Clear & Non-Yellowing.
• PLEASE READ COMPLETE PRODUCT DESCRIPTION: Not for polished GRANITE OR MARBLE
• SPRAY, BRUSH OR ROLL on concrete, pavers, slate, driveways, garage floors, patios, masonry, brick warehouse floors
• MADE IN THE USA. Professional Results VERY low odor dries in hours.

User questions & answers

Question:	After applying, how long do i have to wait before i can cut my tile
Answer:	24-48 Hours.
Question:	fire pit sealers for hi heat
Answer:	I'd have to say no on that one. It could probably take a little heat but anything close to direct flames, forget it.
Question:	My intent is to use this at an entry door, I live in Seattle, will this make the stone slick
Answer:	I don't know for sure, but with the way it looks and feels on my table, I would think that yes, it will make the stone slick.
Question:	How do you apply it? Brush, spray bottle, pesticide spray hose etc? I'll be using it for about 30 stones approx 7"x
Answer:	We applied it to a slate floor with a wool pad applicator, made for applying floor finishes. Worked well. We were going to use a paint roller, but since the instructions didn't mention that in its list of ways to apply, I was worried it may create bubbles or cause problems. The instructions do list a pad applicator, paint brush, or low presure sprayer. The consistemcy out of the bottle is about like skim milk, or watered down Elmers glue. Dries within an hour, pleasant smell, easy to work with. Did 3 coats. We are extremely pleased with the results.

• Clear, Water Repellent Protection for All Exterior, Porous Masonry & Concrete Surfaces Including Concrete, Brick, Natural Stone, Sandstone, Limestone, Cultured Stone (Stone Veneer/Manufactured Stone), Granite, and More
• Waterproofs and Protects Masonry & Concrete Surfaces from Water Damage & Freeze/Thaw Damage
• 100% Breathable - Doesn't Form a Film, Allows Trapped Moisture to Escape Which Prevents Pitting, Cracking & Delaminating
• Water-Based/Eco-Friendly - Soap & Water Cleanup, Low Odor
• 5 Year Warranty on Vertical Concrete & Masonry Surfaces

User questions & answers

Question:	Does this have a really strong smell on application
Answer:	I did not notice any harsh smell. I was outside.
Question:	If you are sealing around outside windows, do you need to tape off the windows? Does this harm windows or metal painted trim around windows
Answer:	I used it on brick and stone and actually coated a metal mailbox with no issues. I would probably tape off the glass.
Question:	does this darken the color of the stone? does the stone look different at all after it dries- including sheen
Answer:	I saw no change in color at all.
Question:	Does this product need to be diluted with any other thing
Answer:	No this product is ready to use and does not need to be diluted.

Product features

MasonryDefender All Purpose Concrete, Brick & Stone Sealer

This concrete sealer can cover a range from 90-150 sq. ft. per gallon depending on surface porosity. Before applying to your concrete, please make sure that the surface is completely clean and allowed to dry for at least 6 hours. Available in both a 1 gallon and a 2.5 gallon container. Unlike heavy 5 gallon containers, the 2.5 gallon containers are easier to lift, and easy to pour. This product isn't just for concrete. It can be used as an all purpose water repellent and sealer for any bare masonry, concrete, or natural stone surface.

Properly Protects Your Concrete, Brick or Stone Surfaces

Use the MasonryDefender All Purpose Concrete, Brick & Stone Sealer to fully protect your concrete and masonry surface as well as brightening the appearance and enhancing your curb appeal. Protects against cracking and pitting that is caused by moisture that seeps into the concrete over time. It also has a salt guard that protects against de-icing salts and chemicals. After the solution is applied, water will now bead instead of seeping into your driveway causing more damage. Once cured, you'll notice that your driveway, sidewalk or patio will dry much sooner than your neighbors as water isn't able to penetrate into your concrete or masonry surfaces. No longer waste your time power washing your driveway for hours. Stay fully protected for up to 5 years on vertical surfaces.

How To Apply The Concrete, Brick & Stone Sealer

Make sure that the surface temperature is a minimum of 40°F and a maximum of 100°F for three hours following application. Once your surface is free and clear of any dirt and debris, use a low pressure pump-up garden sprayer to spray a thin, even layer. The use of a sprayer will allow you to evenly apply the product. For vertical surfaces, start at the bottom and work your way towards the top, applying a flood coat so that the sealer runs down approximately 6" from where you're spraying. The surface should remain wet for 2-3 minutes before final absorption. Apply a second coat within a few minutes of the first. On horizontal surfaces, avoid puddling or ponding; brush or broom to spread material until the sealer thoroughly penetrates the surface. Surface will be dry in 2-6 hours, depending on temperature and humidity. Allow 24 hours before driving on surface.

Product description

Miracle Sealants 511 Impregnator is a penetrating sealer designed for the protection of all medium to dense porous surfaces. Forms a transparent layer strong enough to combat moisture and stains while allowing vapor release. 511 Impregnator does not alter the natural look of the surface following application. Provides water, stain and slip protection for interior and exterior tile and natural stone surfaces. Surfaces treated become harder and less slippery.

From the Manufacturer

511 Impregnator is the original penetrating sealer designed for the protection of all medium to dense porous surfaces. 511 Impregnator forms an invisible barrier that is resistant to moisture and stains while allowing vapor to escape. 511 Impregnator is not a surface coating and will not alter the natural look. All surfaces treated are harder and less slippery.

• For use inside or out on a variety of surfaces including sanded grout, ceramic tile, porcelain tile, glazed tile, stucco, travertine, marble, slate, granite, terrazzo and more to protect against water, stains and slippage
• Formula is oil and water resistant that creates an invisible barrier for protection
• Covers up to 1,000 square feet per quart
• Offers superior coverage, formulated to provide stain protection that is UV transparent and resists weather elements
• Easy application and will not yellow, safe to use around food prep areas

Product features

511 Impregnator Sealer

Use the professionals' trusted choice since 1983 to protect expensive stone, tile, brick and more. This innovative, easy-to-use sealer dries invisible and gets deep into surfaces while still allowing water vapor to escape. Ideal for use on a wide variety of stone types in kitchens, bathrooms, patios, driveways and other interior and exterior surfaces.

1. Prepare Surface

Thoroughly clean surfaces and remove any coatings or residue. For tough build-up, Miracle Sealants Miracle Heavy Duty Cleaner Acid Substitute is recommended.

2. Apply Sealer to Dry Surface

In a well ventilated area, use either Miracle Sealant Mira Brush applicator or a clean, lint-free cloth to apply enough sealer to wet the surface. Allow to stand for 3-5 minutes for full penetration.

3. Wipe Excess and Buff

After no more than 5 minutes, remove excess liquid and buff surface with a lint-free cloth. Do not allow sealer to dry on the surface.

Allow to Cure

Allow to dry 3-5 hours, until dry to the touch, before light foot traffic. For best results, keep treated areas dry and free from staining agents for 72 hours.

Protection You Can See

Tile, brick and stone are porous, meaning that they have tiny holes and ridges on their surfaces. Over time these ridges can retain moisture, leading to damage, or make it difficult to fully remove stains. The 511 Impregnator seals off these pores and creates a protective barrier that ensures the lasting beauty of counters, floors and more.

Seals a Wide Range of Surfaces

• Granite

• Travertine

• Quartz

• Stucco

• Slate

• Terrazzo

• Agglomerate

• Glazed Tile

• Ceramic Tile

• Porcelain Tile

• Polished Granite

• Polished Marble

• Sanded Grout

• Quarry Tile

Product description

StoneTech Professional BulletProof Sealer is a brand new, advanced formula that bonds with stone for improved wear resistance. It also features an advanced penetrating microbond that will help protect your stone and tile against tough oil and water-based stains. BulletProof Sealer makes cleaning stone easy and helps preserve the natural look of your stone and tile. BulletProof Sealer can be used on natural stone such as marble, granite, limestone, slate, saltillo, bluestone, flagstone, travertine, and sandstone, in both interior and exterior applications. Price listed is for StoneTech BulletProof Sealer - Quart. The date mentioned on the product is manufacturing date and not the expiration date .

StoneTech BulletProof Sealer is an advanced sealer, designed to provide maximum protection on nature stone against the toughest oil and water-based stains. Always test in a small inconspicuous area with a 24-hour cure time to determine ease of application and desired results. Allow new grout installations to cure for a minimum of 72 hours prior to application. Make sure surface is clean and free of waxes and coatings. Sealer may be applied to damp surfaces one hour after standing water has been removed. Surface temperature should be between 50 °F and 80 °F (10 °C and 26.7 °C). Ensure that the area is well-ventilated during application and until the surface is dry. Keep children and pets out of the area until treated surface is dry. Expected wear is up to 5 years on interior surfaces and up to 3 years on exterior surfaces. Up to 900 sq. ft. of coverage per gallon for a single coat application. Includes: 1 1-Quart (.710L) BulletProof Sealer.

• Unique, extra strength stain protector for interior porous natural stone and grout
• Delivers maximum protection for natural stones
• Provides coverage for up to 100 square feet
• Formulated with advanced, water based fluoropolymers
• Protects up to 5 years on interior surfaces

User questions & answers

Question:	does it make grout waterproof
Answer:	While this product will make stone and grout resistant to water and oil stains, it will not make the product waterproof.
Question:	Does this sealer have silicone in it? I was told to find a silicone-based sealer for my honed granite countertops, but am having a hard time
Answer:	We are not aware of a good Stone or granite sealer on the market that utilizes silicone as an additive. Bulletproof is a great product for honed granite.
Question:	My granite countertops are dull and I don't know if they were ever sealed. Will this product give me the glossy granite look I am looking for
Answer:	I used two products a cleaner http://www.amazon.com/gp/product/B00065W8DQ/ref=wms_ohs_product?ie=UTF8&psc=1 and this and my tables came out with a nice clean and natural shine. By natural I am not talking reflective of light, a shine similiar to the way a stone looks when you take it out of the water. The two products really made my tables beautiful without making the stone look fake and laminated. If you are truly wanting a gloss, I would agree that you might need a professional to come and seal it with something that will have that high shine. However for the price you could always try this first, if you have granite or stone stuff other areas of the house you can always use this there :)
Question:	slate
Answer:	Yes, It says right on the bottle it will protect slate. One word is all we need!
Question:	Just had Quartzite kitchen countertops installed and sealed with this 15 year sealer. What would be safe to use to clean/maintain the countertops
Answer:	Marble life granite or marble cleaner, it is safe on all stones, all metal, paint, wood, great for cleaning up grease with great oil emulsifiers, developed by Union Carbide over 20 years ago. available on Amazon
Question:	is it good for a quartz counter top or is a less expensive sealer just as good
Answer:	For quartz, I would recommend the Stainproof Plus. This sealer will actually penetrate quartz which is non-pourus while other sealers will not. Most quartz manufacturers advertise that quartz does not need to be sealed but we have seen some quartz products that do in fact stain. Some more than others.
Question:	How much area does it cover? How many linear feet of grout does it cover
Answer:	Depending on what you are sealing, the average coverage on a typical seal is 70sqft. Per quart.On grout sealing, again depending on the size and depth of the grout joint, we've gotten about 250 sqft out of 1 quart.
Question:	Does it work on travertine? I didn't see travertine listed on the stones it's made for
Answer:	Sorry but my experience is not good. I spent 2 days properly applying 2 coats to travertine tiles around our pool. The protection lasted for about 8 weeks only. Very disappointed. I think Stain Proof is a big waste of money and as others have said the company do not stand behind their products. Never again!

Product features

Premium Impregnating Sealer is an invisible and breathable sealer that provides premium long lasting protection.

Permanent-bonding impregnating sealer designed for use as premium stain protection. Helps protect against water and oil based stains, efflorescence, picture framing, freeze-thaw damage and salt damage. Treated surfaces are easier to clean and retain breathability, existing color and finish.

For use on natural stone, tiles, pavers, concrete, brick and grout including building facades, floors, walls, countertops, showers, swimming pool surrounds, patios, garages, kitchens and entertaining areas.

STAIN-PROOF SEALING TECHNOLOGY

Staining is the most common damage to porous surfaces such as stone, tile, and pavers. But many other serious problems can also occur if water is allowed to move freely through the material, carrying materials and dirt which can discolor, corrode, and even break up the surface over time.

• Premium water and oil repellence for superior protection. STAIN-PROOF is rated Class 5 when tested in accordance with ISO 10545-14: Determination of Resistance to Stain.
• Unique super-penetrating, permanent bonding technology for long-lasting protection.
• Protects against efflorescence, freeze-thaw and salt spalling damage.
• Retains natural surface color and finish. Treated surfaces are easier to clean and dry quickly, even after heavy rain.
• Super breathable formula: water vapor escapes freely, preventing harmful moisture buildup inside the treated material.
• Stands up to alkaline cleaners and pressure washing.

THE DEEPEST PROTECTION BARRIER

STAIN-PROOF impregnating sealers are technologically different from commonly available silicone, Teflon, flourapolymer and siloxane impregnators. STAIN-PROOF molecules penetrate deeper into porous materials and bond permanently inside the pores without blocking them. This creates a permanent water and oil-repelling barrier deep enough to provide stain protection plus keeps damaging water and water borne salts away from the surfaces.

TECHNOLOGY THAT SETS US APART

STAIN-PROOF sealers are formulated using a unique sealing technology - our sealer molecules are approximately 400+ times smaller than other impregnators and penetrate much further into the pores to form a deeper water and oil repellent barrier, providing optimum protection to surfaces such as natural stone, bricks, pavers, tiles, engineering concrete and grout.

STAIN-PROOF impregnating sealers stand up to cleaning chemicals, traffic, sunlight, and even commercial cleaning techniques such as high-pressure hosing.

Product description

Protect & Extend The Life Of Surfaces & Stone Pavements With StoneTech BulletProof Stone Sealer! A water-based formula with advanced, water-based fluoropolymers, our exterior stone sealer provides excellent resistance to water, oil and dirt without affecting the color of the stone. Apart from giving maximum protection against moisture and humidity, ceramic tile sealer also shields against the toughest of water, food and oil-based stains. Concrete sealer penetrates into the pores to seal the surface and form a barrier that protects against water absorption and stains. Grout sealer works as a sealant and pre-join that prevents moss and mold formation, protects against weathering as well as delicately enhances the appearance. Lasts up to 150% longer than regular sealers. Can be used on interior surfaces like showers, floors and countertops as well as exterior surfaces like patios, driveways, and paths. Suitable to use on all types of external masonry including artificial and natural stone, sandstone, limestone, slate, brick and concrete paving.Features:• No yellowing• Moisture repellent• Stain resistant• Protects against weathering • Suitable for interior and exterior use• Weather resistant• Easy to use• Provides coverage for up to 1,500 square feet• Advanced penetrating microbond protection

StoneTech BulletProof Sealer is an advanced sealer, designed to provide maximum protection on nature stone against the toughest oil and water-based stains. Always test in a small inconspicuous area with a 24-hour cure time to determine ease of application and desired results. Allow new grout installations to cure for a minimum of 72 hours prior to application. Make sure surface is clean and free of waxes and coatings. Sealer may be applied to damp surfaces one hour after standing water has been removed. Surface temperature should be between 50 °F and 80 °F (10 °C and 26.7 °C). Ensure that the area is well-ventilated during application and until the surface is dry. Keep children and pets out of the area until treated surface is dry. Expected wear is up to 5 years on interior surfaces and up to 3 years on exterior surfaces. Up to 900 sq. ft. of coverage per gallon for a single coat application. Includes: 1 1-Gallon (3.785L) BulletProof Sealer.

• Advanced sealer, designed to provide maximum protection on nature stone against the toughest oil and water-based stains 
• Preserves natural look of stone for up to 5 years in interior environments and up to 3 years in exterior environments
• Formulated with advanced, water based fluoropolymers
• Provides coverage for up to 900 sq. ft.
• Recommended surfaces include: honed or textured marble, granite, limestone, travertine, sandstone, saltillo and bluestone

User questions & answers

Question:	Can this be used on smooth shiny granite countertops? In the product info they only recommend it for honed or textured surfaces, not polished surfaces
Answer:	I used it on stone slate floors, a very porous surface, so I am not sure. It says "porous honed or textured granite." That is not shiny polished surfaces. The stuff has to soak in. I like it on slate because the slate looks natural without darkening it. I suggest contacting the manufacturer. There is a phone number on the back of the container 1-888-786-6343. The factory should be able to point you to the right product. I have shiny granite in my master bath. I used a sealer/polish once but after that a rag damp with water is all I need to wipe it down. My brother just uses a damp rag as well for his shiny granite. I do not know why people think granite is high maintenance. I think they like to sell a lot of sealer.
Question:	The suggestion is to apply more than 1 coat. Can i apply the heavy duty kind first followed by the bulletproof to give it a little shine? Thank you
Answer:	Hello Mauli, You can apply the heavy duty stone sealer followed by the bulletproof sealer from Stonetech. These 2 sealers, are called impregnating sealers. This means that these sealer fill the pours of the stone, these sealers will not affect the look of the stone. So unfortunately these sealer will not give the stone any shine at all.
Question:	Does this have a gloss or matte finish? Is this non color enhancing
Answer:	Gloss or matte finish? I would say neither. Once it is dry, the stuff is absolutely invisible. I put two coats on my new stone patio and anticipated some noticeable change. Nothing. You'll know it is there, however, when something capable of staining is eventually spilled. A little soap and water and the problem is solved. I saved the empty containers and marked them clearly with the application date. That way, I remember to order more every other year because the sealer is invisible and gives no hint that it is worn or fadding.
Question:	Can I keep the unused sealant for reuse a year later
Answer:	Yes. If stored at room temperature, has a shelf life of 2 years. Our experience shows us even longer.

Product description

H2Seal is a breakthrough, modified silicate water repellent technology for natural stone, tile, grout, masonry and concrete. It penetrates the applied surface deeply, but in addition, it creates a state-of-the-art nano based cross-linking network forming a virtually impervious barrier to water and dissolved materials in water providing long lasting protection without altering the natural appearance of the surface.



Unlike conventional siloxane and silicate water repellents, H2Seal's chemical formulation contains, new, one-of-kind technology that imparts incredibly effective protection on a wide range of natural and man-made stone, tile, grout, masonry and concrete.



The technology developed for H2Seal H2100 Stone Sealer provides water repellent protection superior to silane and siloxane emulsions, silicates, petroleum distillates and other common water repellents.



H2Seal's advanced technology produces application friendly properties, including ease of application and rapid curing for quick usability and service. Treated surfaces strongly discourage the growth of discoloring mold and mildew.



H2Seal is designed for use as a sealer/water repellent on patios, decks, walkways, floors, showers, decorative landscape stone, around swimming pools, spas and waterfalls; the product will prevent the penetration of water in to structurally sound, crack-free, treated surfaces. H2100 will inhibit the penetration of salts, and forms a revolutionary water resistant seamless surface matrix.

• FAST DRYING - Ready for Foot Traffic 1 Hour After Application - LONG LASTING - 3 to 5 Years Between Applications
• EASY APPLICATION - Other Sealers Can Cause a White Film if Even Slightly Over-Applied - H2Seal Eliminates the Need for Professional Application
• USES LESS BUT SEALS BETTER Than Other Sealers - Deep Penetration into Stone with ONE Coat - Up to 450 Sq Ft of Coverage Per Gallon
• LENGTHENS STONE LIFE While Retaining Natural Look - Low Odor - Inside and Outside Use - Resists Moisture (Including SALTWATER), Stains, Mold, Fungus, and Algae
• APPLICATIONS - For Slate, Travertine, Flagstone, Limestone, Sandstone, Cantera, Quartzite, River Rock, Concrete, Stucco, Grout, Mortar, Non-Glazed Brick, Artificial Stone and Unpolished/Honed Granite/Marble

User questions & answers

Question:	Would this be a good application for outdoor granite
Answer:	Yes. When applying H2Seal to a honed and polished granite surface allow the sealer 5-10 minutes to absorb into the granite before removing excess with terry or microfiber cloth. Since most granite has a dense surface, only a small amount of H2Seal is needed to penetrate and seal.
Question:	For outdoor patio with Travertine pavers. Is silicate sealant superior to silane/siloxane sealants
Answer:	Thank you for your question. If the travertine is honed or polished, and most pavers are, the best sealer is going to be one that uses a small molecule version silicon. In general, siloxanes will be larger molecules, silanes, siliconates and silicates can be/generally are, smaller. Siloxanes will still work, but may take longer to penetrate and can darken the surface. H2100 uses siliconates that proven to be very effective on denser surfaces like travertine. Bruce Erickson Serveon Sealants LLC
Question:	Can I use this after I sand bathroom tile thats in the shower
Answer:	Thank you for your inquiry. Yes you can. Apply one coat, depending on the density of the tile, it will fully absorb or only partially absorb. If it only partially absorbs wipe off any excess. If it full absorbs, 5-10 minutes, apply a second coat. Wipe off any H2100 that does not absorb. Bruce Erickson, Serveon Sealants LLC
Question:	How is this product actually applied (roller, spray, etc
Answer:	The product is easiest applied by using an inexpensive, pump-up sprayer, the type you can buy at a hardware stone. It can also be applied with a brush or a roller. HS100 is forgiving in that you can have minor puddling without needing to worry about drying and leaving a residue. behind. Bruce Erickson