14 best 120mm case fans
120mm case fans are a type of computer cooling fan commonly used to manage and regulate the temperature inside a computer case. These fans are essential for dissipating heat generated by various components within the computer, such as the CPU, GPU, and power supply.Here are some key points about 120mm case fans:
Size: The "120mm" in the name refers to the diameter of the fan blades. These fans are 120mm x 120mm in size and are one of the most popular fan sizes for computer cases due to their balance of airflow and compatibility.
Airflow: 120mm case fans are known for their ability to move a substantial volume of air. They come in different airflow configurations, including high airflow and static pressure variants, to suit different cooling needs.
Mounting: These fans are designed to be mounted on various parts of a computer case. They can be attached to the front, rear, top, or side panels to optimize airflow and cooling efficiency.
Bearing Type: 120mm case fans commonly use different bearing types, such as sleeve bearings, ball bearings, or fluid dynamic bearings. The bearing type affects the fan's longevity, noise level, and performance.
Speed Control: Many 120mm case fans are equipped with speed control options, allowing users to adjust fan speed to balance cooling performance and noise levels. This is typically done through the motherboard's BIOS or a fan controller.
Noise Level: Fan noise is measured in decibels (dB). Manufacturers often provide noise ratings for their fans, helping users choose quieter options for silent or low-noise PC builds.
LED Lighting: Some 120mm case fans come with built-in LED lighting to enhance the aesthetics of the computer. These fans are available in various colors and lighting patterns.
Connector Type: Most 120mm case fans use a 3-pin or 4-pin (PWM) connector to connect to the motherboard or a fan controller. PWM fans offer more precise control over fan speed.
Dust Filters: Many computer cases feature dust filters that can be attached to 120mm case fan mounting points. These filters help prevent dust buildup inside the case.
Multi-Fan Setups: To optimize airflow, users often install multiple 120mm case fans in their PC cases. Common configurations include intake and exhaust fans to create positive or negative pressure inside the case.
Compatibility: It's important to ensure that your computer case has the necessary mounting points and clearances to accommodate 120mm case fans before purchasing them.
Brand and Quality: Various manufacturers produce 120mm case fans, with different levels of quality and performance. Researching and choosing reputable brands can help ensure reliability and longevity.
In summary, 120mm case fans play a crucial role in maintaining optimal temperatures inside a computer case. They come in various configurations and offer features like speed control, LED lighting, and noise management. Choosing the right 120mm case fans can significantly impact the overall performance and cooling efficiency of your computer system.
Below you can find our editor's choice of the best 120mm case fans on the market- High performance cooling fan, 120x120x25 mm, 12V, 4-pin PWM, max. 1700 RPM, max. 25.1 dB(A), >150,000 h MTTF
- Renowned NF-P12 high-end 120x25mm 12V fan, more than 100 awards and recommendations from international computer hardware websites and magazines, hundreds of thousands of satisfied users
- Pressure-optimised blade design with outstanding quietness of operation: high static pressure and strong CFM for air-based CPU coolers, water cooling radiators or low-noise chassis ventilation
- 1700rpm 4-pin PWM version with excellent balance of performance and quietness, supports automatic motherboard speed control (powerful airflow when required, virtually silent at idle)
- Streamlined redux edition: proven Noctua quality at an attractive price point, wide range of optional accessories (anti-vibration mounts, S-ATA adaptors, y-splitters, extension cables, etc.)
User questions & answers
Question: | Does this come with a molex connector |
Answer: | No |
Question: | Will the pwm control on this fan stop it completely even with power to +12v/gnd |
Answer: | I bought this as an accessory to the ring and my daughter said the bigger guys worked well. Sorry that's not more help. I think their figures were the 3" or 4" ones. |
Question: | Is this an airflow fan or a static pressure fan |
Answer: | They do break apart but are easily able to be put back together |
Question: | How many cfm, or cubic feet per minute |
Answer: | They're 6 inches |
Product features
Proven NF-P12 design
Tens of thousands of quiet cooling enthusiasts around the globe swear by Noctua's classic NF-P12. Thanks to its impressive quietness, excellent performance and impeccable quality, the NF-P12 has become an established reference for quiet 120mm fans.
Pressure-optimised Nine-Blade Design
Specifically developed for high-impedance applications such as CPU coolers, water-cooling radiators or cases with tight fan grills, the NF-P12's nine-blade impeller provides outstanding pressure and airflow performance.
SSO-Bearing
Combining the proven concept of hydrodynamic bearing with an additional magnet that supports the self-stabilisation of the rotor axis, Noctua's time-tested technology has become synonymous with supremely quiet operation and exceptional long-term stability.
Vortex-Control Notches
Noctua's signature Vortex-Control Notches split up trailing edge vortices and thus spread the fan's noise emission over a wider range of frequencies. This measure makes the fan sound more pleasant to the human ear.
Colour-customisable with NA-SAVP1 anti-vibration pads
The fan’s frame can be outfitted with Noctua’s chromax line NA-SAVP1 anti-vibration pads. Available in black, red, blue, white, green and yellow, these pads not only damp minute vibrations but also allow the fan to be colour-customised in order to coordinate it with popular build colour schemes!
Product description
The Pure Wings 2 120mm PWM high-speed fan offers excellent be quiet! Cooling in the entry-level class. The extremely high air pressure makes it the perfect choice for any system. Pure Wings 2 high-speed fans offer the highest level of reliability and excellent cooling with a nearly unbeatable price-performance ratio. Nine air flow optimized fan blades to reduce noise-causing air turbulence The durable rifle bearing provides an operating life of 80, 000 hours Even at maximum speed, the fan reaches only 36. 9 dB (A) Product concept, design and quality control in Germany Three years manufacturer's Air flow optimized fan blades For a perfect cooling. The fan blade surfaces are optimized to increase airflow and air pressure while reducing noise-causing turbulence. The recipe for effective cooling of Pure Wings 2 fans. The Pure Wings 2 120mm high-speed fan is at maximum capacity only at 35. 9dB (A). Variable fan speed Volume and fan speed can be controlled by the pulse width modulation (PWM) via 4-pin fan controller. No matter if a maximum cooling capacity is required or rather a minimum volume. Both can be adjusted as needed. Rifle bearing technology The Pure Wings 2 120mm PWM high-speed fan stands for a particularly reliable operation and promises a very long life of up to 80, 000 hours. Technical Details Dimensions: 120mm Revolutions at 100% PWM / 12V (rpm): 2000 Air flow @ 100% PWM / 12V (cfm / m3 / h): 65. 51 / 111. 3 Air pressure @ 100% PWM / 12V (mm H2O): 2. 23 Volume at 100% PWM / 12V (dB (A)): 36. 9
- Nine airflow-optimized fan blades that reduce noise-generating turbulence
- Long life rifle bearing gives an operating lifetime of 80,000 hours
- A fan speed of 2,000 rpm for extremely high air pressure
- Even at maximum speed, operates at only 36.9 dB(A)
User questions & answers
Question: | Can i run the blo39 to cool a car audio amp, and if so do i just find a positive and negative pins on the plug |
Answer: | Hi there. Don’t bother buying, please save your money. The quality was horrible and came broken. My son was 8 at the time and he was so sad. I had to take him the same day he got it to Walmart to find a better quality one, but ended up ordering from Walmart because it wasn’t in the store, but it finally came and kid was happy. Good luck. |
Question: | Do the 80mm fans come with rubber mounts |
Answer: | Hi, I bought these for my sons for their wrestlers. The chairs and are good, but the ladders are ok. I hope this helps. |
Question: | Is this a true pwm fan |
Answer: | ladders are too small but tables work great (in terms of WWE elite figure size) |
Question: | Is there a 24v version? Which model # would it be? I need 80mm 24v fans. Thanks |
Answer: | They are rather flimsy. |
- Higher air flow to enhance cooling performance
- Economic solution for perfect performance
- RoHS compliance for protecting the environment
- 3 IN 1 Value Pack
- Ultra silent operation at 19 dBA
User questions & answers
Question: | are these at the fasted speed connected to the molex |
Answer: | The fan has an arrow on it show the direction of the air flow. They can be mounted to blow out of or into the case. |
Question: | do these need to use the molex power connector |
Answer: | My take on these fans is vendor quality, as for air flow, that depends in part on your case. |
Question: | pin connection |
Answer: | Not right off, it’s just the standard screw size |
Question: | Do the fans come with screws? Cause I dont have any |
Answer: | 12v |
Product features
Product description
- Product Size: 120 * 120 * 25mm
- Pitch: 10.5cm
- Rated voltage: 12V
- Current: 0.12A
- Input power: 1.44W
- Speed: 1200RPM (constant speed)
- Air volume: 38CFM
- Static pressure: 58Pa
- Noise: 19DB
- Weight: 130g
- Trusted Premium Brand : 18-month manufacturer's warranty and Professional Customer Service Assistance.
- Silent Case Fan:The impeller was designed with a focus on minimzing the noise level (21.5 dBA) yet delivering the superior airflow (30.5 CFM) and pressure (0.65 mmH2O)
- Highly Efficient Ventilation : The destinctive design on the back end of the fan blades providing highly efficient ventilation (1000 RPM)
- High Quality Fan Blade :Designed with 7 blades to provide high airflow (30.5CFM), good cooling capacity.
- Package:(1)PF 120mm Case Fans *5;(2)1 to 3 Fan Splitter *2;(3)Screw *20
User questions & answers
Question: | Which way do these fans blow |
Answer: | Approximately 54 CFM. |
Question: | How does this fan differ from the ones posted with a cfm of 50.78 and a static pressure of 1.96mmH |
Answer: | yes they are 12 volt fans. |
Question: | Does anyone know the size of the screw |
Answer: | I did use this fan to replace the EVO 212 stock fan. This fan is pretty close to inaudible at 1000 RPM (goes up to 1500). But the fan does not move as much air as the stock fan. Idle temps are up 2 degrees C, load temps are up almost 10 degrees C. If your rig is already running hot, this is not the right fan for you. |
Question: | Are these 24 volt |
Answer: | The NF-F12 is a high static pressure fan designed to push airflow against substantial resistance, as with a water-cooling radiator or a heatsink. For a case fan, you're better off with the NF-S12A -- it's both quieter and moves a greater volume of air. |
Question: | How much air does this push in CFM |
Answer: | This does not come with fan hub. Each fan has a molex connector and 3pin motherboard connector. You can daisy chain with molex connectors |
Question: | Just confirming these are 12 volts. Using for a different application |
Answer: | Yes, you should have no problem connecting the 4-pin Molex peripheral connectors on each fan to each other. There is both a male and a female end that you can use to daisy chain them together. |
Question: | Can I use this to replace EVO 212's stock fan (a Cooler Master 120mm which rattled from day one), facing downwards, clipped to the heatsink? Thx |
Answer: | Sleeve bearing fans! |
Question: | Would this be a better case fan then the NF-S12A PWM? I want to mount a fan on my case to blow air on my HDDs |
Answer: | Yes, all our fans come with screws. |
Product features
Heptaperf Impeller
Custom designed for the new Focused Flow frame and to work in tandem with the eleven stator guide vanes, the NF-F12's seven blade Heptaperf impeller has been carefully optimised to achieve a perfect balance between power and quietness.
SSO2 bearing
The NF-F12 is the first fan to feature the further optimised second generation of Noctua's renowned, time-tested SSO bearing. With SSO2, the rear magnet is placed closer to the axis to provide even better stabilisation, precision and durability.
Varying Angular Distance and Vortex Control Notches
The NF-F12's stator guide vanes are set out in Varying Angular Distance and feature Vortex-Control Notches. Both measures help to spread the noise emission over a broader frequency spectrum and thus make the fan's sound pattern more agreeable to the human ear.
Scope of Delivery
- Low-Noise Adapter (L.N.A.)
- 4-Pin Y-Cable
- 30cm Extension Cable
- 4 Vibration-Compensators
- 4 Fan Screws
- 【Premium Cooling Fan】Increasing more colorful in the user's case by add the awesome RGB light in the FX-120 RGB Case Fan. Each 120MM rgb fan comes with 6 high-brightness LED lamp beads. Three 120MM fans provide excellent heat dissipation, add fun and bring you better gaming experience.
- 【Special Threaded Blade Design】The special 9-blade special thread design can minimize resistance and further improve fan performance. The output air flow reaches 31.68CFM under the standard of 1200 rpm, which effectively optimizes the air duct of the chassis and helps dust removal.
- 【Effective Shock Absorption Design】FX-120 case fan is surrounded by 4 soft silicone cushions which widely decreased the noise from fan vibration under high speeds.Highly optimised low-noise design provides outstanding quietness of operation. The maximum noise of the fan is only 18dBA. Quiet sound like falling leaves. The noise reduction technology and heat dissipation performance are greatly help customers to build a perfect case cooling system.
- 【High Performance Hydraulic Bearings】FX-120 fan adopts hydraulic bearing technology. High-performance sleeve bearing with high-performance and lasting bearing technology. It can absorb and conserve lubricating oil. Reducing wear and noise effectively. The bearing life can reach more than 40,000 hours.
- 【Simple Installation】RGB case fan is compatible with all types of chassis and easy to install. Humanized power supply interface design, two interfaces of small 3PIN on the motherboard and 4PIN for power supply D-type Port. Please do not connect 4PIN and 3PIN at the same time to avoid short circuit! Tips: FX-120 Case fan does not have ARGB function, and there is no remote control and controller. Please do not connect them to the controller.
Product features
Static Color LED SilentPro Fan
Each 120MM case fan with 6 ultra-bright RGB LED lights to create a colorful case for you Easily. Smart Choice for your Case's Cooling Solution.
FX-120 Case Fan Phantom Series
Product Size:120x120x25mm
Product Weigh:125g
Rated Voltage:12VDC
Rated Current:0.18土0.02A
Speed of the Fan :1200+10%RPM
Air Flow Range:31.68士10%CFM
Noise:18dBA
Bearing Type:Hydraulic Bearing
Screw Specifications:4.6x10mm
Threaded Blade Design
The 9 blades with special thread design bring strong wind pressure. Keep your system cool with powerful fan speeds up to 1, 200 RPM, pushing up to 31.68 CFM of air.
Shock Absorption Silent Fan
Four sound-absorbing cushions are used around the fan to effectively reduce the noise of the fan. The actual measured noise rate is below 18dBA.
High Performance Hydraulic Bearings
FX-120 fan adopts hydraulic bearing technology. It can absorb and conserve lubricating oil and improve the efficiency of the product.
Product description
SickleFlow 120 V2 Red, is our signature cooling performance with a rejuvenated ARGB design, provides a specific air cooling solution. Revised curve blade design to improve airflow and air pressure. A refreshed frosted blade to enhance light dispersion for a more vibrant and luminescent effect. Enhanced frame structure, reducing turbulent flow and noise. Sealed and secured fan bearing, preventing dust and lubricating oil leakage while increasing the fan’s operation stability and life span.
- Red Lighting: Signature cooling performance with a red led design: a perfect choice for all of the users wanting a single color with lighting effects.
- New Blade Design: Revised curve blade design to improve airflow and air pressure. A refreshed blade for improved lighting.
- Enhanced Fan Frame: Enhanced frame structure, reducing turbulent flow noise increase efficiency.
- Sealed Bearing Structure: Sealed and secured fan bearing, preventing dust and lubricating oil leakage while increasing the fan’s operation stability and life span.
User questions & answers
Question: | So how do these all connect? Does it have an rgb hub or are they all daisy chained? What do I need to buy extra to make them work |
Answer: | There are plenty of places online that you can download the software from. Just go to google and do a search. Or, you can buy a stand alone cd drive and connect it via USB to your computer. They’re fairly cheap. |
Question: | My motherboard does not support RGB and would like to know what controller would be recommended from the manufacturer |
Answer: | Yes, this can be unlocked to use thses bands |
Question: | Will they fit the cooler master Q300L |
Answer: | No, it works with windows only |
Question: | Anyone have issue with leds? mine are not working. at all |
Answer: | I don’t know. They do work pretty far out though. I think other people have used them for cruises. |
Product features
SickleFlow 120 V2 Red
SickleFlow 120 V2 Red, is our signature cooling performance with a rejuvenated ARGB design, provides a specific air cooling solution. Revised curve blade design to improve airflow and air pressure. A refreshed frosted blade to enhance light dispersion for a more vibrant and luminescent effect. Enhanced frame structure, reducing turbulent flow and noise. Sealed and secured fan bearing, preventing dust and lubricating oil leakage while increasing the fan’s operation stability and life span.
Enhanced Fan Frame
Enhanced frame structure, reducing turbulent flow noise increase efficiency.
Sealed Bearing Structure
Two-tier sealing mechanism, preventing dust and lubricating oil leakage while increasing the fan’s operation stability and life span.
PWM Fan Control
Dynamically adjust the speed between 650 RPM to 1,800 RPM, minimizing noise or maximizing airflow.
- Ultra-Long Lifespan : High-quality sleeve bearing is as quiet as the Fluid Dynamic Bearing (21.5 dBA) and delivers an ultra-long lifespan for years of maintenance-free use.
- Trusted Premium Brand : 18-month manufacturer's warranty and Professional Customer Service Assistance.
- Blue LED Light : Increasing more colorful in the user's case by add the awesome Blue light in the Balance F12.
- Highly Efficient Ventilation : The distinctive design on the back end of the fan blades providing highly efficient ventilation (1000 RPM with 30.5 CFM)
- Enjoy the beautiful LED effect (Blue Light) and nice heat dissipation effect by using 1st Generation of Antec F12 LED Case Fan.
User questions & answers
Question: | How loud are these fans? Are they very loud or rather quiet |
Answer: | 3 pin non pwm. The case cones with a controller included that can handle 5 or 6 3 pin fans (fans will spin full speed) and 5 or 6 rgb 3 pin 5v devices. The hub wires to a motherboard (asus, msi, and 2 others) with a 3 pin 5v header. The hub is powered off sata on your psu. If your mono cant control the rgb it can be dobe with a button on the case. But fans are 3 pin and 5v argb 3 pin. |
Question: | How can i connect this to my asrock b450m pro |
Answer: | No but most of your newer motherboards will have a BIOS setting where you can dictate the behavior of the power button to act as a reset button. |
Question: | How many amps per fan |
Answer: | Yes |
Question: | Can someone explain how to connect these to the motherboard to be able to change the rpm |
Answer: | The max GPU lenght is 405mm (15.94 inches) |
- Silent Case Fan:8 rubber pads which can make your rig more quietly (21.5dBA) when the fans work with high performance.
- Easy To Install: Entry-level installation and operation, only 3 steps.
- Superior Airflow And Pressure : The square design of the fan frame providing highly efficient ventilation.(1000 RPM)
- High Quality Fan Blade :Designed with 9 blades to provide high airflow (37.5CFM), good cooling capacity.
- Technical Data: Fan Speed: 1000 RPM , Airflow: 37.5CFM , Air pressure: 0.71 mmH2O
User questions & answers
Question: | What is the voltage |
Answer: | One between the 5.25 and 3.5 drive bays. Just a little slot. The second is on the floor of the case. Four screw holes. |
Product features
Silent Rubber Pad:
Antec P12 Case Fans with 8 rubber pads which can make your rig more quietly when the fans work with high performance.
Hydro Bearing:
The superior airflow (37.5 CFM), ultra-long lifespan for years of maintenance-free usage.
High Quality Fan Blade :
The 9 Blades not only provide high performance ( 37.5 CFM) but also provide the high level noise (21.5dBA)
- Silent Case Fan:8 rubber pads which can make your rig more quietly (21.5dBA) when the fans work with high performance.
- Easy To Install: Entry-level installation and operation, only 3 steps.
- Superior Airflow And Pressure : The square design of the fan frame providing highly efficient ventilation.(1000 RPM)
- High Quality Fan Blade :Designed with 9 blades to provide high airflow (37.5CFM), good cooling capacity.
- Technical Data: Fan Speed: 1000 RPM , Airflow: 37.5CFM , Air pressure: 0.71 mmH2O
Product features
Silent Rubber Pad:
Antec P12 Case Fans with 8 rubber pads which can make your rig more quietly when the fans work with high performance.
Hydro Bearing:
The superior airflow (37.5 CFM), ultra-long lifespan for years of maintenance-free usage.
High Quality Fan Blade :
The 9 Blades not only provide high performance ( 37.5 CFM) but also provide the high level noise (21.5dBA)
Product description
Ring 12 High Static Pressure LED Radiator Fan: Thermaltake has released the new Ring 12 LED Series, a 120mm fan fitted to enhance static pressure that produces impressive cooling performance with an optimized fan blade. Hydraulic bearings for silent operation guarantee ultra-low noise. In addition, an anti-vibration mounting system strengthens the stability during operation. The patented LED Ring maintains color and brightness uniformity; the lighting effect is visible from all sides and angles. The four-colored LED ring (in blue, red, white, and green) adds style to the chassis.
- Concentrated Compression Blade (CCB) for high-static pressure of demanding applications such as radiators, the CCB is engineered to focus the inner weaker circle of air outwards, allowing the outer section to pressurize and compress the air.
- Wind Blocker Frame: To achieve maximum static pressure in all applications, the frame is designed to work with the CCB to reduces the blade's noise and vibration, creating a perfect balance between power and sound.
- Hydraulic Bearing/Low-Noise Design: The hydraulic bearing self-lubricates with a high quality, friction-reducing substance which lowers operating noise and improves efficiency. The Low-Noise Cable can reduce the noise level by 24% from 24.6dBA to 18.7dBA.
- Anti-vibration Mounting System: In-mold injection anti-vibration rubber pads provide hassle-free usage for 80% protection coverage, including all four corners.
- Four colors of the Patented LED Versions Available: Ring 12 LED Series is also available with different LED versions (red, blue, green, and white), adding cooling aesthetics to the chassis.
- Inlet and outlet temp. are 49℃ and 44.5℃ in respective, △T= 4.5℃
User questions & answers
Question: | Do the red ones truly glow red? Some of the user pics seems more orange |
Answer: | The sound card seems work with any commonly 3.5mm gaming headset . |
Question: | Is this fan good to use as a top exhaust case fan |
Answer: | This unit made a huge sound difference with my headset and PC. The sound is so much better now. |
Question: | When installing these as a side fan in a thermaltake core x9 case, how do you tell which direction the fan pulls air into the case |
Answer: | Just do the sound setting ,no need install anything . |
Question: | Are these 140x120 or square 140x |
Answer: | It is a very low end card with crappy drivers that only work in the most basic sense. In fact on some versions of Windows they will not even install even though they are supposed to. Don't expect anything special from these. |
Product features
Riing 12/14 LED Series
Thermaltake is proud to announce the new Riing 12 and 14 LED Series Case/Radiator Fans. Enhance static pressure to produce impressive cooling performance with optimized fan blades. Driven by hydraulic bearings, provide silent operation for extremely low noise operation and anti-vibration mounting. The patented LED Ring Series maintains color and brightness uniformity; the lighting effect is visible from all sides and angles. The multi-colored LED ring (in yellow, orange, red, blue, white, and green) adds style to any chassis.
Thermal Image Test
Compared to the standard case fan, the combination of three Ring 12 radiator fans and 360 millimeter radiator delivers 40% better cooling performance. (Inlet and outlet temp. are 49 Celsius and 44.5 Celsius in respective, △T= 4.5 degree Celsius)
Wind Blocker Frame
To achieve maximum static pressure in all applications, the wind blocker frame is designed to work with the Concentrated Compression Blade’s (CCB) pressure mechanism by directing airflow towards the outer section of the blade, thereby creating a compression effect and blocking any pressure from escaping. This reduces the blade’s noise and vibration, creating a perfect balance between power and sound.
Hydraulic Bearing Design
The hydraulic bearing self-lubricates with a high quality, friction-reducing substance which lowers operating noise and improves efficiency. The seal cap prevents leakage of the lubricant, and improves the lifespan of the unit. The LNC (Low-Noise Cable) can reduce the noise level by 24% from 24.6 dBA to 18.7 dBA.
Anti-vibration Mounting System
In-mold injection anti-vibration rubber pads provide hassle-free usage for 80% protection coverage, including all four corners.
Multi-use Cooling Support
Designed to increase chassis cooling performance and bring a unique look to the system with patented LED Riing lighting.
- Available in 120 millimeter and 140 millimeter sizes in multiple colors.
- Includes coarse thread screws for chassis installation.
Liquid Cooling Applications
Ideal for liquid cooling applications, increase radiator cooling performance and bring a unique look to the system with patented LED Riing lighting.
- Available in 120 millimeter and 140 millimeter sizes in multiple colors.
- Includes M3 thread screws for radiator installation.
Product description
Important:
1. When installing the fan with screws, a middle or large Phillips screwdriver is recommended. If your screwdriver is small, it may be difficult to install.
2. Only supports 5V ARGB, not 12V ARGB.
3. RGB does not work, it may be because the motherboard RGB lighting mode is selected (but your motherboard does not have RGB function), please press the "M/B" key to switch to the remote control mode.
4. Please insert the red power cord correctly into the Power interface of the hub, and do not connect to the black LED strip interface.
5. If your motherboard does not have RGB function, it is not necessary to insert 5V ARGB Cable.
6. The correct way to install the screws is to twist the screws in from the outside of the case, not from the inside of the case.
7. Logistics may cause damage to the product. If there is any problem with fans, please feel free to contact the seller through Amazon. We will respond to your questions as soon as possible.
Package Contents:
3 x 120mm Cooling Fan
12 x Mounting Screws
1 x Hub
1 x Remote
1 x SYNC Cable
- The lighting effect of KB-24 RGB case fans is the most outstanding among GIM fans.
- 3 Music Modes: To further optimize your gaming experience, the fans are designed with 3 different music modes and each music mode has it’s own lighting mode, which creates awesome visual and audio effects and help you play games in high spirits.
- RF Wireless Remote: A wireless control is included for convenience and easier operation. By only one key, you can easily adjust fan speed (S/M/H)/ lighting effects/ brightness/ LED speed without opening the case.
- Synchronizable RGB Lighting via Motherboard: It allows you to control fan lighting with 5V addressable RGB motherboards. Compatible with motherboard software includes US aura Sync, Gigabyte RGB FUSION, MSI Mystic Light Sync, etc.
- No Risk to Purchase: Any quality issue with your fans, please feel free to contact us and let us know. We will try our best to help you! GIM strives to bring the best customer service!
User questions & answers
Question: | Fan is running but no color. lights up when i tap the power box but when i stop touching it, doesn't light up. not sure what's wrong |
Answer: | The red ones should indeed be red. There are orange versions of these fans, which may be the ones you've seen. |
Question: | Hola, alguien sabe si me sirve para un chasis cooler masterboz mb511, gigaby aorus pro mb550 y fuente de poder thermaltake 600 watss plus |
Answer: | Most definately!!! i'm almost done with a new build that im doing and i'm using nothing but Thermaltake fans from AMAZON (2 140mm fans for front intake airflow and 4 120mm fans for top and rear exhaust case fans and for cooling my hard drives.) I love these fans. Buy this fan!!! don't give it a 2nd thought, u won't regret it. i hope i helped you and good luck with your build!!! if you have anymore questions feel free to ask. |
Question: | Does this have 4 pin |
Answer: | Yep. I agree with both "Amazon Customer" and "Jeff T."This is true for PC case fans. It used to be that some DC fans could spin either way depending on how they were connected.That is not the case any more. Fans and their connections are standardized so that wind blows out the side that has the support bars and so that the fan can only connect to the motherboard in one way.You can mount Riing fans back-to-back (stacked) for greater forced air pressure. It will not hurt them. I have twin 140's doing this out the back of my case. At one time I had a triple stack but it was overkill.The Thermaltake cases are sweet... hope you are enjoying the case. One note though..... don't reinstall the fans too much (as in configuring and testing your layout). The rubberized plastic will only take the fans screws so many times before the hole is reamed too large in the fan tabs to reinstall. Then you have to use threadlocker or a dab of hot glue in the hole to give the screws something to bite on.These are some of the finest-built fans I've used. |
Question: | hub connected to sata power, all fans working fine with MB aura but hub is not responding to remote. can see remote light flashes but no change |
Answer: | 140x140 never heard of a fan being 140x120 |
Product features
What can GIM RGB case fans bring for you?
Synchronizable RGB lighting via motherboard
Sync ready with all 5V mobo houses including Gigabytes, Asus and MSI
Extreme Cooling Performance
33.5 CFM, GIM Fan optimized heat dissipation and hydraulic bearing to ensure ultra-quiet operation
Smart Music Modes
With built-in high sensitive sound sensor, this fans can change different lighting modes with the rhythm of music, make you enjoy the feast of sight and hearing when you play intense computer games playing or listen to any music with strong rhythm.
Important:
1. When installing the fan with screws, a middle or large Phillips screwdriver is recommended. If your screwdriver is small, it may be difficult to install.
2. Only supports 5V ARGB, not 12V ARGB.
3. RGB does not work, it may be because the motherboard RGB lighting mode is selected (but your motherboard does not have RGB function), please press the "M/B" key to switch to the remote control mode.
4. Please insert the red power cord correctly into the Power interface of the hub, and do not connect to the black LED strip interface.
5. If your motherboard does not have RGB function, it is not necessary to insert 5V ARGB Cable.
6. The correct way to install the screws is to twist the screws in from the outside of the case, not from the inside of the case.
7. Logistics may cause damage to the product. If there is any problem with fans, please feel free to contact the seller through Amazon. We will respond to your questions as soon as possible.
Specifications:
Fan Dimension: 120mm(W) x 120mm(D) x 25mm(H)
Fan Speed: 0-1300
Rated Current: 0.35A
Noise Level: 0-15 dBA
Rated Voltage: DC 12V(fan) / 5V(LED)
Power Input: 1.92W
Lifetime: 20000 Hrs
Controller Connector: 6 PIN(for fan),2*4 PIN(for LED strip)
Package Contents:
3 x 120mm Cooling Fan
12 x Mounting Screws
1 x Hub
1 x Remote
1 x SYNC Cable
- Trusted Premium Brand : 18-month manufacturer's warranty and Professional Customer Service Assistance.
- Silent Case Fan:The impeller was designed with a focus on minimzing the noise level (21.5 dBA) yet delivering the superior airflow (30.5 CFM) and pressure (0.65 mmH2O)
- Highly Efficient Ventilation : The destinctive design on the back end of the fan blades providing highly efficient ventilation (1000 RPM)
- High Quality Fan Blade :Designed with 7 blades to provide high airflow (30.5CFM), good cooling capacity.
- Package:(1)PF 120mm Case Fans *1;(2)Screw *4
Product description
ARCTIC offers innovative solutions incessantly - changing impossible user requirements into new. Always focused on our customers, ARCTIC is devoted to deliver excellence through a strong dedication and a high sense of commitment. In light of the ever-changing consumer landscapes, we aspire to continue to expand and diversify our products and solutions. From computer cooling and peripherals to audio and digital home entertainment, we strive to enrich people's lives by creating innovative, user friendly yet affordable products with a great value of benefit. For us value for money is a key factor - a constant our customers rely on.
- INNOVATIVE DESIGN: Design of fan blades improves airflow and facilitates efficient ventilation, impeller was designed with a focus on minimzing the noise level yet delivering the desired airflow and pressure
- TWO WAY INSTALLATION: Blow warm air out of the case, draw cool air into your case
- LONG SERVICE LIFE: The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage, thus this bearing is as quiet as a sleeve bearing but comes with a higher service life
- SAVE YOUR MONEY WITH THE FIVE PACK: By buying this product you will receive five F12 Standard Case Fans, thus saving your money
- TECHNICAL DATA: Fan speed: 1350 RPM, Airflow: 53 CFM/90.1 m³/h (@ 1350 RPM), Noise Level: 0.3 Sone (@ 1350 RPM), Pin: 3-pin
User questions & answers
Question: | Does these have PWM |
Answer: | No, please consider F12 PWM Rev.2 or F12 PWM PST. -Justin@ARCTIC |
Question: | Is it 4 pin or 3 pin? The earlier answer seems to be guessing. 3 pin is PWM, and 4-pin is both PWM and measured RPM (tachometer pulses) as feedback |
Answer: | there are different versions of each type of fan (P or F series) and the different sizes. 3 pin (usually) means voltage control, 4 pin (most of the time) runs in pwm mode. no difference in operating (one better than the other), as long as the board/fan controller recognizes the fan properly, and 3 pins transfer rpm as well. but fan rpm controlled by voltage seems to be a bit smoother at the lower end (~500 rmpand lower), versus the pwm one. then again, the "normal" F/P fans with pwm (0.3 sone) usually allow for lower minimum rpm (down to ~200) versus the silent type about ~350 (0.08 sone) |
Question: | What is the difference between Rev. 2 and Rev. 1 - I can't find the differences on their site. Thank you |
Answer: | Hi,The Rev 1 is now the PWM PST fan and comes with a PST adapter to add more fans to the same PWM Signal. The Rev 2 is the same fan but without the PST adapter. Best regards,Jens |
Question: | Static Pressure? can't seem to fine it any where online |
Answer: | Air Flow: 74 CFM / 126 m³/h (@ 1,350 RPM)Noise Level: 0.3 Sone (@ 1,350 RPM)This is from URL: http://www.arctic.ac/us_en/arctic-f12-pwm-pst.htmlThe included manual / instructions say noting but "high static pressure" |
Product features
Long Service Life
The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage. Thus this bearing is as quiet as a sleeve bearing but comes with a significantly higher service life.
Innovative Design Enables Quiet and Efficient Ventilation
The innovative design of the fan blades improves the air flow and facilitates a highly efficient ventilation. The impeller was designed with a focus on minimzing the noise level yet delivering the desired airflow and pressure.
Two Way Installation
You can either blow warm air out of the case or draw cool air into your case.
Highly Efficient
The ARCTIC F12 Case Fan is the ultimate PC-Cooler solution.
- The Excellent Airflow (62.7 CFM) & Air Pressure (2.9mmH2O) in square frame and bringing 8 anti-vibration rubber pads
- PC Case Fans, 120mm Case Fans, 4-pin PWM, Max. 2200 RPM, Max. 62.7 CFM, Max. 28 dB(A)
- With 2,200 RPM control range, Antec SP Series fans deliver total control between LOW Noise and HIGH Airflow without compromise.
- High-Quality Sleeve Bearing as quiet as the Fluid Dynamic Bearing and delivers an ultra-long lifespan for years of maintenance-free usage.
- Trusted Premium Brand : 12-months manufacturer's warranty and Professional Customer Service Assistance.
Latest Reviews
View all
Breaker Hammers
- Updated: 18.07.2023
- Read reviews

Bourbon Glasses
- Updated: 18.01.2023
- Read reviews

Dock Bumpers
- Updated: 12.01.2023
- Read reviews

Doormat Indoor Shoes
- Updated: 17.03.2023
- Read reviews

Smart Plug For Google Home
- Updated: 25.04.2023
- Read reviews