14 best exterior paint for cinder block

Product description

This premium, interior/exterior paint is formulated to waterproof and seal porous concrete and masonry surfaces both inside and outside your home. Using nanotechnology, this paint forms a barrier to help stop water infiltration while an alkali resistant coating provides a long-lasting, durable and decorative finish. Apply this paint on properly prepped and cured above and below grade basement walls, masonry walls, retaining walls, cinder and concrete blocks, stucco and brick. Do not use on floors or on walls with active water leaks. PRIME all uncoated, patched, chalky, and adjacent wood and/or metal surfaces with KILZ premium primer. For below grade application, fill all holes/cracks with hydraulic cement prior to painting. This is a 1-Gallon can of interior/exterior basement and masonry waterproofing paint, white, 1-Gallon in white. Depending on surface porosity, 1 gallon covers 75 to 125 square feet per gallon. A minimum of two coats of this product are required for optimal results. Paint Dries to touch in one hour and can be re-coated in 4 hours depending on humidity. Apply using a high quality 1/2"-3/4" nap roller, 4 inch nylon/polyester brush or an airless sprayer capable of delivering 2200-3200 psi or greater using a . 023"-. 025" spray tip. KILZ has been making premium primers and paints for 40 years.

From the Manufacturer

KILZ Masonry Waterproofing Paint is an interior/exterior paint that creates a waterproof barrier. It applies easily with a brush or roller. Ideal for basement walls and concrete.

• This premium, interior/exterior paint is formulated to waterproof and seal porous concrete and masonry surfaces both inside and outside your home.
• Using nanotechnology, this paint forms a barrier to help stop water infiltration while an alkali resistant coating provides a long-lasting, durable and decorative finish.
• Apply this paint on properly prepped and cured above and below grade basement walls, masonry walls, retaining walls, cinder and concrete blocks, stucco and brick. Do not use on floors or on walls with active water leaks.
• Prime all uncoated, patched, chalky, and adjacent wood and/or metal surfaces with KILZ Premium Primer. For below grade application, fill all holes/cracks with hydraulic cement prior to painting.
• This is a 1-gallon can of Interior/Exterior Basement and Masonry Waterproofing Paint, White, 1-gallon in white. Depending on surface porosity, 1 gallon covers 75 to 125 square feet per.
• A minimum of two coats of this product are required for optimal results. Paint dries to touch in one hour and can be re-coated in 4 hours depending on humidity.
• Apply using a high quality 1/2"-3/4" nap roller, 4" nylon/polyester brush or an airless sprayer capable of delivering 2200-3200 PSI or greater using a .023"-.025" spray tip.
• KILZ has been making premium primers and paints for 40 years. KILZ was named Paint Brand of the Year in 2015 in the Harris Poll EquiTrend  Rankings.

User questions & answers

Question:	Does this cover rubber paint
Answer:	I'm sure that you can if they are offering free samples at this time.
Question:	Can this be used on the basement floor? I need to seal where the wall and floor come together as well as the whole wall
Answer:	Hi Eder, KILZ TRIBUTE can be applied to properly prepared, horizontal interior concrete that is older than 30 days. Etching bare concrete before applying your top coat is vital to a long lasting paint job. TRIBUTE was not formulated to withstand foot traffic and cannot be driven on so it's not a good choice for a concrete floor. Good luck with your project!
Question:	can i paint over it once it's dry
Answer:	Hi Jorge, Yes, our Satin sheen will reflect light. It offers a pearl-like sheen. If you're looking for a low-lustre, minimally reflective option, we recommend our Matte sheen. If you prefer a more glossy and sleek finish, try our Semi-Gloss paint.
Question:	Can I paint this on contrete walls in my basement? What color is is
Answer:	Hi Linda, Yes, KILZ TRIBUTE can be used on ceilings in good condition. If you have any stains you'll want to use a primer first. For ceilings we recommend our Matte sheen. Good luck with your project!

Product features

KILZ Basement & Masonry Waterproofer

A premium, interior/exterior waterproofer designed for porous concrete and masonry surfaces, KILZ Basement & Masonry Waterproofer uses nanotechnology to form a barrier to help stop water infiltration.

This low odor waterproofer is formulated for above and below grade interior basement walls and interior/exterior masonry walls, retaining walls, cinder and concrete blocks, stucco and brick.

KILZ Basement & Masonry Waterproofer's alkali-resistant coating provides a long-lasting, durable and decorative finish.

Dos

Apply with your choice of a brush or roller. Use on properly patched and cleaned basement, masonry, garage, and foundation and landscape walls. Allow new concrete to cure at least 30 days before painting. Remove existing mildew stains before applying. Clean up with soap and water.

Don'ts

Do not use on floors or on walls with active water leaks. Do not apply over oil-or latex-based paint. Not for use over existing mildew.

Product description

This high-quality, acrylic latex water-base interior/exterior paint offers excellent hiding properties with great adhesion and water repellency on textured interior and exterior surfaces. This self-priming paint offers a mildew resistant finish on properly prepared smooth, Rough and textured masonry, drywall, stucco, and brick surfaces. It is alkali-resistant up to ph 12. 0, easy to apply, and cleans up with soap and water. This formula is designed to accentuate all textured surfaces while achieving a natural look. This is a gallon can of KILZ interior/exterior concrete, brick, and tile paint in Gray with a flat finish. Covers 250-400 square feet per gallon depending on surface texture. All surfaces must be clean, free of dust, chalk, oil, grease, wax, polish, mold and mildew stains, loose and peeling paint, rust, and all other foreign substances. This paint can be rolled, brushed, or sprayed on. KILZ has been making premium primers and paints for 40 years. KILZ was named paint brand of the year in 2015 in the Harris poll EquiTrend  Rankings.

• This high-quality, Acrylic latex water-base interior/exterior paint offers excellent hiding properties with great adhesion and water repellency on textured interior and exterior surfaces
• This self-priming paint offers a mildew resistant finish on properly prepared smooth, Rough and textured masonry, drywall, stucco, and brick surfaces
• It is alkali-resistant up to ph 12.0, easy to apply, and cleans up with soap and water
• This formula is designed to accentuate all textured surfaces while achieving a natural look
• This is a 1-Gallon can of KILZ interior/exterior concrete, brick, and tile paint in Gray with a flat finish. Covers 250-400 square feet per gallon depending on surface texture
• All surfaces must be clean, free of dust, chalk, oil, grease, wax, polish, mold and mildew stains, loose and peeling paint, rust, and all other foreign substances
• This paint can be rolled, brushed, or sprayed on. KILZ has been making premium primers and paints for 40 years
• KILZ has been making premium primers and paints for 40 years. KILZ was named Paint Brand of the Year in 2015 in the Harris Poll EquiTrend Rankings

User questions & answers

Question:	Can this paint be thinned down and used for a lighter coat to allow some of the brick's natural color to come through? Maybe a 2:1 ration
Answer:	Yes it certainly will but you wouldn’t use this for lap siding it’s a framing nailer, it’s a bit slow but it’s a good tool, the 4amp battery should last 6-8 hours
Question:	What finish does this paint give
Answer:	Not that I know of, but I went to Home Depot and asked if I could bring my nailer in to find a tool bag to fit it; they said no problem, and I found a nice bag that fit it well and a case to fit the nailer accessories and oil.
Question:	Will i need a non-skid grip additive
Answer:	The specs say 2" for normal framing nails as the shortest length and 1 1/2 for metal connector nails... That's what it says I personally haven't used that short of a nail..
Question:	Does this come in black
Answer:	First let me say this Bostitch framing nailer has performed flawlessly. I’m so glad I purchased this one. I have been using B&C 33 degree paper collated nails which, I believe are a part of this good function. I use 3 1/4 “ nails with a diameter of .131” for regular framing. This requires the framing head and moving the plastic rod closer-in for this small diameter nail. The rod slides in and out of the nail cartridge and guides the nails. When using metal joist connectors, change out the head to one with a finger that finds the hole in the metal connector. The nails used with the connectors are 2 1/2” x .162” diameter. This larger diameter requires the rod to be move to a different groove, which guides this larger diameter. I also use other size nails for other purposes, such as 2 3/8” x . 113” diameter. Changing out the framing head and the metal connector head is easy by pressing in a button and sliding them off and on. Moving the rod is just as quick. Remember to lubricate the air connector with the oil that comes with the nailer. I changed out my air connector for one that can rotate. It may all seem confusing or difficult, but it’s not. It’s very easy, simple, and works perfectly.

Product features

Easy to Apply With Excellent Hide

KILZ Masonry, Stucco and Brick Paint is an easy to apply, acrylic/latex paint with excellent hide. Ideal for interior and exterior projects, this product is self-priming on surface in good condition.

Covers 250-400 square feet per gallon depending on surface texture and application method.

Repels Water & Resists Mildew

Our Masonry, Stucco and Brick Paint has a mildew- and water-resistant finish. It also provides excellent adhesion on properly prepared, smooth or textured masonry, stucco, drywall and brick.

Apply with a high-quality polyester blend brush, 3/8"-3/4" nap roller or airless sprayer—use a .015"- .019" tip and 60 mesh filter.

Natural Looking & Water Based

This water-based formula will accentuate all textured surfaces while maintaining a natural look. It is alkali-resistant up to pH 12.0 and cleans up with soap and water.

Not intended for floors. Can be brushed, sprayed or rolled on.

Product description

Water Block Acrylic Masonry Waterproofing paint is designed to waterproof interior or exterior masonry surfaces such as basement walls, foundations, retaining walls, exterior masonry walls, etc. It is alkali resistant and provides positive sealing and waterproofing over bare concrete block, brick, stucco or tilt up concrete walls. No pre-mixing or surface pre-wetting is necessary with this basement and masonry waterproofing paint product. This product contains an agent that inhibits the growth of mildew on the surface of the paint film making it an ideal basement waterproofing paint. INSL-X Water Block Masonry Waterproofing products are designed to waterproof interior or exterior masonry surfaces such as basement walls, foundations, retaining walls, exterior masonry walls, etc. Water Block Acrylic Masonry Waterproofed is intended for vertical wall applications like interior and exterior basement waterproofing and should not be used on floors. Apply directly to bare masonry surfaces. Product may be applied to damp surfaces, but best results will be obtained on dry surfaces.

• Water Based mold and mildew resistant coating for interior and exterior concrete walls. Great for basement walls, foundations and retaining walls.
• Fast Drying waterproof paint for interior/exterior basement walls, cinder blocks, stucco and brick, and masonry.
• High alkali resistance – up to pH-13.
• Waterproofing paint keeps basement walls dry, and provides a mildew resistant coating
• Paint only when surface and air temperatures are between 50 ° (10 °C) and 90 °F (32.2 °C).
• Withstands up to 12 psi hydrostatic pressure.
• Before painting, review the INSL-X Waterblock label for proper preparation and application tips.

User questions & answers

Question:	can i use this as a top coat for a fiberglass rowboat
Answer:	30° angle framing nailer
Question:	Can i use this on sealed concrete floors as a vapor barrier? we do not have any active leaks, our basement is just very humid
Answer:	This is very nice I very recommend
Question:	How bad is the odor in a closed basement
Answer:	No, I would not deviate beyond the prescribed 28 degree wire weld 1/2 head nails. It's a great machine but if you do the full round nails it will jam and could possibly break the tool.
Question:	Can this product be tinted and can you paint a finish coat over it
Answer:	Look it up on YouTube. I charge my bostitch batteries with a Dewalt charger that I modified with a dremel. There are tutorials on YouTube that explain how to modify the battery terminal on the gun to accept Dewalt 20v max or Dewalt 20v XR batteries. It’s nothing major and it’s worth doing if you have Dewalt batteries already. They’re virtually identical batteries just minor differences that you can bypass

Product features

INSL-X DIY Tip

Clean surface with a wire brush to remove any salt deposits.

INSL-X DIY Tip

Ensure all block joints are completely coated for best results.

INSL-X DIY Tip

Check for loose bricks and secure before painting.

Product description

Liquid Rubber Foundation Sealant is an environmentally friendly coating that is easily brushed on and cures into a waterproof membrane. It can be used in many applications where you need to create a watertight seal. Foundations, ICF's, Basements, Shower Liners, Deck and Fence Posts, Planter Boxes, Metal, Wood, Concrete and more. Use Liquid Rubber Seam Tape or Liquid Rubber Geo-Textile to bridge seams, joints, vents, protrusions to create a long lasting repair or rejuvenation.

Apply when temperature is above 40F/5C. Apply to a dry surface, free of dirt, loose flaky paint and coatings, oil, grease, silicone, coal tar or other contaminants. Typically cures within 24-48 hrs.

Do not freeze. Store in a warm area. Do not apply in wet conditions or if rain is forcasted within 24 hrs.



Not meant as a constant walking surface or for long term exposure to UV.

Coverage - Flat/Ponding Surface - 15 sq ft/G per coat. Apply 4-5 heavy coats to achieve a 60-80 mil. (1.5-2.0mm) membrane.

Vertical Surfaces: Exterior - 20 sq ft/G per coat. Apply 3-4 heavy coats to achieve a 40-60 mil. (1.0-1.5mm) membrane. Interior - 50 sq ft/G per coat. Apply 2-3 heavy coats to achieve a 20-30 mil. (0.5-0.76mm) membrane.



Apply next coat when dry to touch and nothing is wet underneath; tacky is okay.



Generally 12-24 hrs between heavy coats. Amounts vary depending on surface roughness.



Use all material up to achieve a long lasting membrane.

Avoid hot, direct, intense sunlight during application. Remove Painters Tape while still wet.



Clean Up - Use soap and water or mineral oil to clean skin.

100% MONEY BACK GUARANTEE - If you need to return anything, we'll refund your full order amount. We ask the material be unopened, in new condition and you ship the product back to us within 90 days. We offer 5 Star Customer Support, Videos and Application Guidance.

• PROTECTIVE FINISH FOR - Foundations, ICF's, Basements, Shower Liners, Deck and Fence Posts, Planter Boxes, Metal, Wood, Concrete and more
• HIGHLY FLEXIBLE - Sealant final membrane has over 900% elongation in the sealing material preventing adhesion failure causing cracks and taring. Flat/Ponding Surface: 50 sq ft/G per coat
• EASY TO APPLY - No mixing required! Apply by brush, roller or high quality piston paint sprayer. Container can be closed and left over material used later. No pot life or working time like 2 component products
• ENVIRONMENTALLY FRIENDLY - Liquid Rubber Foundation Sealant is water based, containing no solvents, VOC's or harmful odors. Safe for humans and pets alike, can be used indoors and outdoors with no special breathing apparatus
• FOR A BULLETPROOF SYSTEM - Bridge joints, seams, vents, gaps, protrusions…. With Liquid Rubber Seam Tape or Liquid Rubber Geo-Textile where possible movement may occur

User questions & answers

Question:	can i use in wood? i want to do wooden pots
Answer:	N66C is recommended to set coils of 15-degree wire-weld or plastic inserted nails into a range of material, including wood shingles, insulation and fiber-cement boards, soft woods, drywall and sheathing and even steel siding. Uses fasteners from 1-1/4 to 2-1/2 inches long.
Question:	What's the lowest temperature to apply this product
Answer:	yes sometimes I have to angle the nail a bit so it doesn't go to deep in the fiber cement board
Question:	Approximately how many square feet will one 5 gallon bucket cover
Answer:	No not for hardie trim. This coil nailer is for the hardie siding not the trim. The trim needs to be attached with a finish nailer use 3" or 2 1/2" stainless steel or galvanized finish nails. Must use those types only with all hardie products. Others will corrode You need a finish nailer
Question:	will this work on a pond
Answer:	BTF83PT is a low profile nailer and weighs 10 lbs

Product features

Liquid Rubber Foundation Sealant

The perfect product for a leaking basement wall or building foundation, Liquid Rubber Foundation Sealant works by creating a watertight seal to keep moisture where you want it. With multiple uses, the possibilities are endless.

Make it a home project

Skip the hassle and cost of contractors and make it a DIY project. From big projects to small projects, accomplish it yourself with the easy application of Liquid Rubber Foundation Sealant. Simply apply by using a brush or roller. It's so easy, anyone can do it.

Highly Flexible

Liquid Rubber Foundation Sealant is highly flexible once cured. With over 900% elongation, you don't have to worry about minor movement destroying all your hard work. Still worrying about movement? Bulletproof your work with the help of Liquid Rubber Seam Tape or Geo-Textile.

Not meant as a constant walking surface or long term exposure to UV.

Easy to Apply

Basically just like painting except you use heavy coats to build up your waterproof membrane. Open the container and start using. You can close the container and use later if you have left over material. No pot life or working time like 2 component products. Apply by Brush, Roller or High Quality Piston Paint Sprayer.

Endless Possibilities

This nature-friendly product allows for an endless possibilities of usage. When you need a watertight seal, think Liquid Rubber. Use for foundations, ICF's, Basements, Shower Liners, Deck and Fence Posts, Planter Boxes, Metal, Wood, Concrete and more. Empower the DIYer in you with Liquid Rubber.

Product description

Diamond Brite Oil Based Paint products provide a professional quality, high hide, mildew resistant alkyd finish with excellent stain removal. It is a durable gloss enamel that helps protect interior and exterior surfaces against repeated abrasion, rust and a variety of household chemicals. This product is a excellent product to also use in industrial applications, machinery or commercial uses. It dries extremely hard. This oil based paint will stand up against surfaces that receive high traffic and use. Where to Use: Wood, Drywall, Plaster, Masonry, Metal, Well-bonded Wallpaper, Brick, Stucco, Aluminum, and Cinder Block. 6-8 Hr Dry Time. 24 Hr Recoat Time. 300 Sq. Ft Coverage per Gallon. Mineral Spirits Clean-Up. Protect from freezing. Features new 2015 shipping packaging and painting instructions.

From the Manufacturer

Freezing This product provides a professional quality, high hide, mildew resistant alkyd finish with excellent stain removal. It is a durable gloss enamel that helps protect interior and exterior surfaces against repeated abrasion, rust and a variety of household chemicals. This product is a excellent product to also use in industrial applications, machinery, or commercial uses. It dries extremely hard, and will stand up against surfaces that receive high traffic and use. Properly prepared Interior or Exterior surfaces such as: Wood, Drywall, Plaster, Masonry, Metal, Well-bonded Wallpaper, Brick, Stucco, Aluminum and Cinder Block. 6-8 Hr Dry Time; 24 Hr Recoat Time 300 Sq. Ft Coverage per Gallon Mineral Spirits Clean-Up Protect from freezing.

• Can be used on interior or exterior surfaces
• Excellent for use on wood, concrete, plaster, masonry, hardboard and metal
• Provides a tough, durable surface
• Resists scuffs, fading, cracking and peeling
• Can be brushed, rolled or sprayed

User questions & answers

Question:	Would this paint be good for my wooden boat or aluminum boat? How does it hold up in the water
Answer:	Yes turn pressure up if need be.

Product features

Fit for Both Industrial and Household Flooring

Applicable surfaces for home use include the basement and garage floor surfaces, patios, or any surface that the user wants to coat with a gloss enamel.

Perfect for Machinery

This product line is composed of a durable gloss enamel that helps protect interior and exterior surfaces against repeated abrasion, rust, fading, cracking, peeling, and a variety of household chemicals.

Protects Railing

This line of oil-based paint products is high hiding, mildew resistant with an alkyd finish.

Bonds Well to Steel and Metal Surfaces

Diamond Brite all purpose oil enamel works best on surfaces such as Wood, Drywall, Plaster, Masonry, Metal, Well-bonded Wallpaper, Brick, Stucco, Aluminum, and Cinder Block.

For best results:

Diamond Brite paint gets shaken prior to being shipped. The mixing on average lasts 2-7 days. Before using the paint mix the paint with a stir stick or paddle that adequately mixes any loose particles on the bottom of the paint can.

Must do's

All surfaces being painted must be cleaned and prepped before painting. This gives your paint a better surface to stick to.

The paint flows best with a natural bristle or a premium quality roller cover with a plastic center.

Do not apply subsequent coats until your current coat is dry. Diamond Brite Oil Enamel Paint has a dry time of 10-12 hours.

Temperature matters!

Apply when air and surface temperatures are between 60°F-90°F (15°C-32°C)

Product description

Ames’ block & wall liquid rubber is a blend of adhesive, high strength, elastomeric, liquid rubber. It is designed especially for waterproofing in extreme situations. It is high in solids and Dries to a tough elastic membrane that is up to 700% elastic to resist cracking and peeling. Ready to use, no mixing required. Block & wall liquid rubber flows into cracks and crevices as a liquid and sets up as a durable rubber to seal leaks wherever they occur. Block & wall liquid rubber is an excellent coating for icf (insulated concrete forms) as well as metal, wood, concrete, and many other applications. It is designed especially for waterproofing in extreme situations such as below-grade foundations, and basement walls. This coating contains no petroleum, is non-toxic and low odor. Formulated to resist fungus, mold and mildew. White in color. Cleans up easily with water. Coverage is 1 gallon per 100 sq. Ft. Per coat. Minimum of two coats recommended. More coats equals longer life. Starts to dry in about 2 hours but can take up to 24 hours depending on temperature and humidity.

• Solar Reflectance Up to 98%
• Solvent: Water
• Permeability: .016 perm rating with 10 mils/min. of coating
• Elongation: Up to 700%
• Strength: 250 PSI

User questions & answers

Question:	Can this product be used over previously painted walls
Answer:	Hi MK, We would not recommend this because you will lose all protection of the paint. You can thin it by putting up to 6 oz. of water but that will not thin it enough to give that look. If this is an interior project, our chalk paint can be sanded to give the look of brick but we do not have anything for exterior like this at this time.
Question:	does a concrete foundation need to be primed before Block and Wall
Answer:	Hi there, Our Masonry, Stucco and Brick Paint comes in a flat finish. I hope you find this info helpful.
Question:	Can this product be painted over
Answer:	Hello, This product was not formulated for use on horizontal surfaces subject to foot traffic. If you're looking for textured concrete paint, we recommend you look into KILZ Over Armor (also available on Amazon). If you're looking for something that can be driven on, see our KILZ 1-Part Epoxy Concrete & Garage Floor Paint.
Question:	Can this be painted
Answer:	Not exactly sure. I don't believe it does.

Product description

Rust Bullet DuraGrade Concrete is a high-performance, high-build, superior protective coating that can be applied directly onto concrete surfaces without any acid etching. DuraGrade Concrete has outstanding adhesion to concrete surfaces and is scratch, chip, chemical and UV resistant, requiring no primer, basecoat, or topcoat. DuraGrade' s patent-pending formula is low in VOCs providing VOC compliance in all 50 states and is available in 18 standard colors or a custom color option. Easy to apply by brush, roller, or spray equipment. Protects from hot tire pickup. Ideal for indoor or outdoor surfaces. For decorative purposes, apply Rust Bullet Color Flakes to the final coat of DuraGrade Concrete then topcoat with Rust Bullet’s DuraGrade Clear protective coating or add an anti-skid material for a slip-resistant surface. Covers approximately 75 square feet, per quart, per coat, depending on the porosity and texture of the substrate. Color Disclaimer - The colors shown may not be exact due to screen image limitations. For absolute color fidelity, colors should be selected from physical samples, available upon request.

• The Premier Garage Floor Paint and Concrete Paint
• Apply Directly to Concrete Without Acid Etching
• Scratch, Chip, Chemical and UV Resistant
• Requires No Primer, Basecoat, or Topcoat
• Ideal for Indoor or Outdoor Surfaces

User questions & answers

Question:	Is there more information on spray settings for duragrade concrete? what can i use to thin the paint before spraying with a hvlp system
Answer:	Thank you for asking about our WaterBlock Paint. We do not recommend Insl-X WaterBlock for a fiberglass rowboat. Please reach out to us at inslx. reivews @ gmail. com, if you have any additional questions.
Question:	Do you have to apply this to raw concrete or can it applied over concrete that has paint on it
Answer:	Hello, we do not recommend to use WaterBlock on floors.
Question:	how long till dry
Answer:	No significant odor at all. Paint dried very quickly. Just be aware that it is thick. Easily absorbed into surface. Good stuff.
Question:	This is very expensive so before I even consider buying for my 750 sf garage does it hold up well
Answer:	Hello, our Waterblock Paint is only available in a stock white at this time. This product can be used on its own or top-coated after four hours.

Product features

Rust Bullet DuraGrade Concrete

Use for all your Home/Farm Applications including:

Product description

Diamond Brite Oil Based Paint products provide a professional quality, high hide, mildew resistant alkyd finish with excellent stain removal. It is a durable gloss enamel that helps protect interior and exterior surfaces against repeated abrasion, rust and a variety of household chemicals. This product is a excellent product to also use in industrial applications, machinery or commercial uses. It dries extremely hard. This oil based paint will stand up against surfaces that receive high traffic and use. Where to Use: Wood, Drywall, Plaster, Masonry, Metal, Well-bonded Wallpaper, Brick, Stucco, Aluminum, and Cinder Block. 6-8 Hr Dry Time. 24 Hr Recoat Time. 300 Sq. Ft Coverage per Gallon. Mineral Spirits Clean-Up. Protect from freezing. Features new 2015 shipping packaging and painting instructions.

From the Manufacturer

Freezing This product provides a professional quality, high hide, mildew resistant alkyd finish with excellent stain removal. It is a durable gloss enamel that helps protect interior and exterior surfaces against repeated abrasion, rust and a variety of household chemicals. This product is a excellent product to also use in industrial applications, machinery, or commercial uses. It dries extremely hard, and will stand up against surfaces that receive high traffic and use. Properly prepared Interior or Exterior surfaces such as: Wood, Drywall, Plaster, Masonry, Metal, Well-bonded Wallpaper, Brick, Stucco, Aluminum and Cinder Block. 6-8 Hr Dry Time; 24 Hr Recoat Time 300 Sq. Ft Coverage per Gallon Mineral Spirits Clean-Up Protect from freezing.

• Can be used on interior or exterior surfaces
• Excellent for use on wood, concrete, plaster, masonry, hardboard and metal
• Provides a tough, durable surface
• Resists scuffs, fading, cracking and peeling
• Can be brushed, rolled or sprayed

User questions & answers

Question:	I would like to use this to paint my boat trailer. would you suggest adding a paint hardener catalyst
Answer:	I don't think the temp affects the function of this product as it does not have a " Do not allow to freeze " requirement. It doesn't really dry as it remains pliable like rubber. I would however heed the suppliers advice and try not to apply it below 5c/40f if possible.
Question:	Can I use this to paint a concrete pool
Answer:	100-125sq ft at a 60mil thickness. Bought 5, 5gal buckets to do 580sq ft of foundation and had about 1/2 gallon left over at an average of 60mil thickness.
Question:	Can I paint the kids room with this
Answer:	Yes, as a matter of fact I just redid my riverbed and the pond with concrete and then applied a couple of good coats of the liquid rubber using the last coat to adhere the rocks and it is beautiful and is holding the water perfectly'

Product features

Fit for Both Industrial and Household Flooring

Applicable surfaces for home use include the basement and garage floor surfaces, patios, or any surface that the user wants to coat with a gloss enamel.

Perfect for Machinery

This product line is composed of a durable gloss enamel that helps protect interior and exterior surfaces against repeated abrasion, rust, fading, cracking, peeling, and a variety of household chemicals.

Protects Railing

This line of oil-based paint products is high hiding, mildew resistant with an alkyd finish.

Bonds Well to Steel and Metal Surfaces

Diamond Brite all purpose oil enamel works best on surfaces such as Wood, Drywall, Plaster, Masonry, Metal, Well-bonded Wallpaper, Brick, Stucco, Aluminum, and Cinder Block.

For best results:

Diamond Brite paint gets shaken prior to being shipped. The mixing on average lasts 2-7 days. Before using the paint mix the paint with a stir stick or paddle that adequately mixes any loose particles on the bottom of the paint can.

Must do's

All surfaces being painted must be cleaned and prepped before painting. This gives your paint a better surface to stick to.

The paint flows best with a natural bristle or a premium quality roller cover with a plastic center.

Do not apply subsequent coats until your current coat is dry. Diamond Brite Oil Enamel Paint has a dry time of 10-12 hours.

Temperature matters!

Apply when air and surface temperatures are between 60°F-90°F (15°C-32°C)

Product description

For the most demanding conditions. For above or below grade masonry walls, basement walls, retaining walls, foundations, landscape walls, cinder blocks, concrete blocks, bare concrete swimming pools, stucco and brick. Formulated to resist mildew growth on the paint film. Stops 12 psi. Passes ASTM D-7088 Resistance to Hydrostatic pressure and ASTM D-6904 resistance to wind driven rain. Covers 75 to 125 sq. ft per gallon depending on surface porosity.

• Fully Transferable 15 Year Warranty
• Ideal for interior, exterior, above or below grade masonry walls, basement walls, retaining walls, foundations, landscape walls, cinder blocks, concrete blocks, bare concrete swimming pools, stucco and brick
• Flexible Encapsulated Polymer used for the ultimate in waterproof protection
• Specially formulated to resist mildew growth on the paint film
• 3 hour dry time

User questions & answers

Question:	Does it need to be applied to a dry concrete wall surface? Water is seeping through the mortar between the blocks
Answer:	Yes.. leaves a bit of a rubbery finish, but you could paint over it.
Question:	How is it as a pool paint. Does its stop small leaks
Answer:	We used this to seal our basement floor and walls. We used the color that we wanted so we wouldn't have to paint over it.
Question:	How much surface area will this cover? Didn't see a specification on that listed
Answer:	I truly don't know, BUT!!!!....I believe this is some of the hardest paint made...With proper preparation, a primer coat and a finish coat I would guess you will be happy... This stuff is thick so get yourself a good quality brush and eat your Weaties, this paint has to be brushed in well, it does not flow like latex
Question:	Can you paint over it
Answer:	Yes, you can use the Liquid Rubber Foundation Sealant in wooden pots or planters. Please see the Liquid Rubber USA site for more specific application info.

Product description

' Exterior Paint, Paint Color Family Beiges, Beige, Semi-Gloss Finish, Size 1 gal., VOC Content 15g/L, Coverage 200 to 300 sq. ft./gal., Dry Time 30 min., Dry Time Recoat 4 hr., Application Method Brush, Roll, Spray, Surface Interior and Exterior Use on Masonry, Brick, Cement, Concrete Block, Cinder Block, Stucco, Wood, Hardboard, Aluminum, Fiber Board, Vinyl Siding or Trim, Plaster, New or Coated Acoustic Ceiling, and Previously Painted or Primed Metal '

User questions & answers

Question:	Is this paint more tan and beige or creme color
Answer:	Yes. We painted it over a wall with a latex based paint and it worked very well.
Question:	would you say this is an off white or is it darker than that
Answer:	Yes....use Ames primer prior to applying the block and wall rubber

Product description

A good concrete floor paint is highly durable, easy to clean and won't scuff, fade, crack or blister easily, even from hot tires and other heavy activity. This single component, water-based floor paint is formulated to last in hard to clean areas like basements and garages. It's resistant to staining and damage from chemicals, Oil and gasoline. Use this high-durability floor paint on coated or uncoated concrete, masonry, stone and brick. This paint is ideal on high-traffic surfaces such as garage floors, basements, driveways and porches. KILZ concrete floor paint delivers a Satin finish that applies smoothly and evenly to floors and horizontal surfaces. Dries to touch in 2 hours. Recoat in 4 hours. Not intended for vertical surfaces. This is a 1-Gallon can of KILZ 1-part epoxy Acrylic interior/exterior concrete and garage floor paint in Slate Gray with a Satin finish. Ideal for use on new and uncoated concrete or masonry surfaces or painted, stained or sealed concrete. 1 Gallon of KILZ Concrete & Garage Floor Paint covers 400-500 square feet on smooth surfaces and 300-400 square feet on rough surfaces. KILZ has been making premium primers and paints for 40 years. KILZ was named Paint Brand of the Year in 2015 in the Harris Poll EquiTrend  Rankings.

• A good concrete floor paint is highly durable, easy to clean and won't scuff, fade, crack or blister easily, even from hot tires and other heavy activity.
• This single component, water-based floor paint is formulated to last in hard to clean areas like basements and garages. It's resistant to staining and damage from chemicals, Oil and gasoline.
• Use this high-durability floor paint on coated or uncoated concrete, masonry, stone and brick. This paint is ideal on high-traffic surfaces such as garage floors, basements, driveways and porches.
• KILZ concrete floor paint delivers a Satin finish that applies smoothly and evenly to floors and horizontal surfaces. Dries to touch in 2 hours. Recoat in 4 hours. Not intended for vertical surfaces.
• This is a 1-Gallon can of KILZ 1-part epoxy Acrylic interior/exterior concrete and garage floor paint in Slate Gray with a Satin finish.
• Ideal for use on new and uncoated concrete or masonry surfaces or painted, stained or sealed concrete. Viscosity - 90 - 100 KU. Volume Solids - 31%. Weight Solids - 41%
• 1 Gallon of KILZ Concrete & Garage Floor Paint covers 400-500 square feet on smooth surfaces and 300-400 square feet on rough surfaces.
• KILZ has been making premium primers and paints for 40 years. KILZ was named Paint Brand of the Year in 2015 in the Harris Poll EquiTrend  Rankings.

User questions & answers

Question:	Greetings, can this product be used inside a residence, living room, kitchen, bathroom and bedroom? The floor is ceramic, you will not have any probl
Answer:	Hello! You can spray with and HVLP using a 2.0 tip. We do not recommend thinning the product. You will want to adjust your tip size as opposed to adjusting the coating.
Question:	Anyone apply this to an exterior concrete wall
Answer:	Hello Adam: Rust Bullet Formulas are designed to be applied to a bare, clean and etched substrate. If you have paint on the concrete it will need to be sanded off, then the floor must be cleaned, etched and dry prior to applying Rust Bullet DuraGrade. We strongly recommend that you visit www.rustbullet.com so you can view and print the Application Instructions, and cover the steps to the process. If you prefer, you can e-mail [email protected], and we can send them to you. Regards,
Question:	Would this work on a concrete table top from Pottery barn, It have a light grey stain on it
Answer:	Rust Bullet DuraGrade dries to the touch to add additional coats, usually within 4-6 hours. After 12 hours, you must scuff (break the glaze) on the surface for re-coat purposes for the purposes of optimum adhesion. Rust Bullet coatings are, on average (depending on the humidity and weather/temperature conditions in you area) fully cured within 72 hours. ~Karen - Rust Bullet Cust. Serv. Rep.
Question:	Can I paint half the garage floor and do the other half a week later as long as I keep the paint in a sealed container between uses
Answer:	Trust me on this, this is quality/thick/durable product. The stuff from box stores isn’t even close. Plus the more humid during application, the faster it dries.

Product features

Give Your Garage a New Look

This high-performance, ready-to-use formula resists hot tire pick-up, scuffing, fading, cracking, peeling and blistering. Resistant to household chemicals like oil and gasoline.

Proper Surface Prep is Key

For proper penetration and adhesion of topcoat, use a concrete and masonry cleaner prior to applying this product. Apply in two thin coats, being careful not to over apply.

Great for Driveways, Decks & Basements Too

For use on horizontal surfaces including garage floors, driveways, basements, porches and pool decks. Not formulated for vertical application or industrial use.

Product description

Slick or slippery surfaces can easily become hazardous — especially if they are in high-traffic areas. To avoid falls, trips, and slips, apply Skid Grip textured paint. It is safe for bare feet and shoes but can help provide extra traction to slippery areas. This 100% acrylic coating is extremely durable, making it great for interior or exterior use. Apply this paint to pool decks, courts, playgrounds, porches, ramps, boat decks, stairs, garage floors, driveways, and more to promote safety for people and pets of all ages. The highly adhesive paint can stick to almost any surface, including wood, concrete, stone, metal, fiberglass, and more. Plus, it is industrial strength and can withstand all types of weather along with everyday wear and tear. We also offer several color options so you can create a no-slip surface that blends in with or stands out from existing decor. Choose from Camel, Cobalt, Crimson, Emerald, Jet, Plain, and Slate. These colors are designed to last for years to come, thanks to Skid Grip's long-lasting and abrasion-resistant finish. Skid Grip exceeds ADA standards for anti-slip surfaces, so you can feel confident in your purchase. Our anti-abrasion coating is easy to apply. To use, first thoroughly clean the surface to remove dust, debris, or other particles. Then, apply Skid Grip using a brush or roller. Allow ample time to dry before touching or applying another coat. We recommend 1–2 coats for optimal coverage. Order this 1-gallon can of Skid Grip today!

• ANTI-SLIP PAINT: Skid Grip is an acrylic textured paint that can turn any surface into a skid-resistant one. The durable coating is ideal for indoor or outdoor use to create a high-grip finish.
• INCREASE SAFETY: This slip-resistant coating is ideal for making high-traffic areas safer. Add it to a patio, pool deck, basketball court, driveway, step, ramp, or playground to prevent falls.
• ADHERES TO MOST SURFACES: Whether for home or commercial use, liquid Skid Grip can be used on almost any surface. It adheres to cement, wood, stone, asphalt, and more.
• EASY APPLICATION: To create a non-skid surface, first clean the surface thoroughly to remove any debris. Then use a brush or roller to apply Skid Grip and create texture. Allow ample time to dry.
• MULTIPLE COLORS AVAILABLE: Don't let a textured surface become an eyesore. We offer Skid Grip in fade-resistant colors, including Camel, Cobalt, Crimson, Emerald, Jet, Plain, and Slate.

User questions & answers

Question:	Never got it
Answer:	Great stuff
Question:	Do the decorative epoxy flakes work well with this item
Answer:	The guy complaining its loaded with grit . How did you think it was made to be slip resistant ? There are alot of foljs that must growed up near power lines .
Question:	what color is closed to brown
Answer:	Hi Thanks for your question. Camel is a light medium brown. Thanks
Question:	Can this be used indoors for concrete floors
Answer:	Yes, but unless you don't plan on sweeping or mopping the floor I wouldn't use it on its own. It feels like rough concrete when applied. As a base coat that is covered in regular paint for concrete it works great. Once covered you end up with a textured, skid resistant floor that is sweep-able and mop-able.

Product features

100% Acrylic Anti-Slip Coating

Skid Grip provides a slip resistant surface that is specifically designed to beautify existing concrete, asphalt, and other surfaces. The 100% acrylic formulation provides increased performance and reduces oxidation. This prevents peeling, flaking and the erosion of the concrete surface below, keeping the integrity of the anti-slip surface intact for years to come.

Cost Effective

Skid Grip Anti-Slip Paint is a cost effective way to enhance the landscape of any project. This durable, 100% acrylic anti-slip finish has superior adhesion to prevent flaking and peeling on both concrete and asphalt. Create beautiful walkways, patios, pool decks, sport courts, ramps and driveways that are attractive, practical and economical.

Ideal For Use On

Skid-Grip Anti-Slip Paint can be top coated with Traffic and Zone Marking White Paint and assorted ready mixed colors for high contrast lines and stencils.

• Parks and Playgrounds
• Tennis Courts

Ideal For Use On

Skid-Grip Anti-Slip Paint can be top coated with Traffic and Zone Marking White Paint and assorted ready mixed colors for high contrast lines and stencils.

• Pool Areas
• Patios

Ideal For Use On

Skid-Grip Anti-Slip Paint can be top coated with Traffic and Zone Marking White Paint and assorted ready mixed colors for high contrast lines and stencils.

• Walkways
• Sidewalks

Ideal For Use On

Skid-Grip Anti-Slip Paint can be top coated with Traffic and Zone Marking White Paint and assorted ready mixed colors for high contrast lines and stencils.

• Parking Lots
• Driveways
• Cement Stairs

Seven Amazing Colors to Choose From

Product description

Beautify and protect your home's concrete and asphalt surfaces with AdCoat Garage Floor & Driveway Paint. This ACRYLIC waterbased paint uses a 100% pure epoxy to protect against hot-tire pick-up, automotive fluids such as gasoline and oil and most household chemicals. The addition of acrylic resin means it won't yellow in the sun making it perfect for outdoor use as well as indoor. Its an extremely durable epoxy paint that creates a beautiful protective finish on driveways, garage floors, pool decks, walkways and most interior and exterior surfaces. For use on concrete, aged asphalt, brick, wood, primed metal and previously painted surfaces. +For Residential, Commercial & Industrial Applications +Satin Finish +Water Clean-Up, Environmentally Friendly +6 Hour Pot-Life +Size: 1 Gallon of Material per Kit +Coverage: 250 sq. ft. +Application: Brush, Roller or Spray Equipment

• Indoor & outdoor surfaces
• 2 part epoxy -- water based acrylic
• 1 gallon covers up to 250 square feet
• Designed for concrete, aged asphalt, wood and brick
• Garages, driveways, car ports, balconies, porches, walkways, warehouses

User questions & answers

Question:	My garage was painted by previous owner, at least 30 years ago, it's worn. Will this product need any special prep before application
Answer:	Yes you can. Just give your Dry-Lok plenty of dry time before applying paint. I think it says on container as to total cure time for the Dry-Lok
Question:	Will this kit work on a plywood floor
Answer:	We used it on wood siding, so wasn't a question for our application. From what I have read, heavily used equipment, trailers, tractors, etc. benefit from a hardener. Apparently it resists scratches and actually makes the finish "harder" than just the paint. Sounds like a good idea for heavily used items.
Question:	Can this product be used to cover an old epoxy surface
Answer:	The paint chipped after 6 months, I would not recommend this product at all
Question:	other colors not greyfor driveways
Answer:	It's good paint . Oil baseand very slow to dry . You may want water based but if you buy it you,ll pleased also

Product description

This powerful stain-blocking water-base formula seals surfaces, helps to achieve a uniform finish, hides stains and previous colors and offers excellent adhesion to most interior and exterior surfaces. KILZ Premium offer just the right consistency for a smooth and level finish that seals porous surfaces and fills in small imperfections. It features mildewcide protection to prevent mildew and mold. With excellent adhesion for most surfaces, use on interior and exterior drywall, plaster, woodwork, paneling, masonry and brick. Ideal for high-humidity areas including bathrooms and laundry rooms. Use for color changes, to seal light to medium stains and to minimize surface imperfections caused by texture and porosity differences. For heavy stains, please consider KILZ Max primer. This is a 1-gallon can of KILZ Premium High-Hide Stain Blocking Latex Primer/Sealer in white for interior and exterior surfaces. Covers approximately 300-400 square feet per gallon. Use KILZ Premium under or over latex or oil based paint. Use on properly prepared surfaces free of dust, grease, chalk, mold, rust and peeling paint. Zero VOCs, low odor and easy clean up with soap and water makes it safe to use in occupied homes and work spaces. KILZ has been making premium primers and paints for 40 years. KILZ was named Paint Brand of the Year in 2015 in the Harris Poll EquiTrend Rankings.

From the Manufacturer

KILZ Premium primer is a superior quality fast drying, low odor, zero VOC water-base, primer-sealer-stainblocker. Formulated to minimize problems caused by color changes, minor stains, surface textures and porosity differences, it offers excellent adhesion and provides a mildew resistant coating.

• This powerful stain-blocking water-base formula seals surfaces, helps to achieve a uniform finish, hides stains and previous colors and offers excellent adhesion to most interior and exterior surfaces.
• KILZ Premium offer just the right consistency for a smooth and level finish that seals porous surfaces and fills in small imperfections. It features mildewcide protection to prevent mildew and mold.
• With excellent adhesion for most surfaces, use on interior and exterior drywall, plaster, woodwork, paneling, masonry and brick. Ideal for high-humidity areas including bathrooms and laundry rooms.
• Use for color changes, to seal light to medium stains and to minimize surface imperfections caused by texture and porosity differences. For heavy stains, please consider KILZ Max primer.
• This is a 1-gallon can of KILZ Premium High-Hide Stain Blocking Latex Primer/Sealer in white for interior and exterior surfaces. Covers approximately 300-400 square feet per gallon.
• Use KILZ Premium under or over latex or oil based paint. Use on properly prepared surfaces free of dust, grease, chalk, mold, rust and peeling paint.
• Zero VOCs, low odor and easy clean up with soap and water makes it safe to use in occupied homes and work spaces.

User questions & answers

Question:	Is this what replaced kilz max? it was the best i can't find it now
Answer:	Kilz Restoration replaced Kilz Max
Question:	Cement pool deck
Answer:	here is what i did and it turned out fantastic. i bought 2 of 'kilz 13510701 L340711 interior/exterior self-priming stucco + brick flat paint 1 gallon coal smoke (smoky slate gray).' i purchased this on amazon at $39.66 per gallon last april 2019, and this april 2020 it is $29.39 per gallon. i then meticulously cleaned/prepped a massive patio area and also a front garage cement floor, and daily rented a good sized spray painter at home depot. the end result looks great and is a very pleasant light gray color that is relaxing to look at. good luck with your project.
Question:	Can this be used to cover porcelain tiles
Answer:	i didn't use this on porcelain tiles, but this sounds like a good idea to me to file in my head for the future. i would use a hand-held graco spray painter for my hypothetical project and use a nonabrasive cleaner like a wet swiffer. good luck with your work.
Question:	If we want to paint window trims white, can this primer (white) suffice, or do we need to paint over this
Answer:	I use the Kilz for the single coat application. It cleans up well. However, I am an older lady and I kind of run out of energy faster thans I used to. My brother who wass a paint contractor is the one who clued me in on the kilz -only application. I have that in my bathroom and it holds up well on all surfaces.

Product features

Very Low VOCs & Low Odor

Very low VOCs, low odor and easy clean up with soap and water makes it safe to use in occupied homes and work spaces. (Formulated without addition of VOC containing solvent. Less than 5 g/L VOC, excluding colorant.)

Where to Use

Use on interior and exterior drywall, plaster, woodwork, paneling, masonry and brick. KILZ Premium's mildew-resistant finish also makes it ideal for high-humidity areas including bathrooms and laundry rooms.

When to Use

Color changes are no match for KILZ Premium. Use this primer before you repaint for better results from your topcoat. KILZ Premium will also block light to medium stains.

Smooth Sailing

KILZ Premium is just the right consistency to provide a smooth and level finish that will seal porous surfaces and fill in small imperfections. Dries quickly —recoat in 1 hour.