13 best brown sharpe test indicators
Brown & Sharpe is a well-known brand in the field of dimensional measurement, particularly for their precision test indicators. Brown & Sharpe test indicators are widely used in various industries for accurate measurements and inspections.Here's what you need to know about Brown & Sharpe test indicators:
Test Indicators: Test indicators are precision instruments used for measuring small linear distances or deviations in various mechanical and manufacturing processes. They are commonly used in quality control, machining, and metrology to ensure precise measurements and alignments.
Brown & Sharpe: Brown & Sharpe is a respected manufacturer of metrology tools and equipment. They produce a range of test indicators known for their high accuracy, reliability, and durability. These indicators are designed to meet the needs of professionals in manufacturing, machining, and quality assurance.
Features: Brown & Sharpe test indicators typically have the following features:
- Dial Display: They have a dial indicator display that provides a visual readout of measurements.
- Precision Stylus: A small and precise stylus or contact point is used to make contact with the surface being measured.
- Adjustable Arms: Test indicators often come with adjustable arms to accommodate different measurement scenarios.
- Rotating Bezels: Some models have rotating bezels to reset the indicator after measurement.
Applications: Brown & Sharpe test indicators find applications in various industries, including:
- Manufacturing: They are used to check the accuracy of machine tools, ensure proper alignment of components, and measure deviations in parts.
- Quality Control: In quality control processes, these indicators help ensure products meet specified tolerances.
- Machining: Machinists use test indicators to align workpieces, set cutting tools, and inspect surfaces for imperfections.
Accuracy: These indicators are known for their high accuracy and precision, making them suitable for tasks that require fine measurements, often with resolutions down to thousandths of an inch (0.001").
Accessories: Brown & Sharpe offers a range of accessories to complement their test indicators, including magnetic bases, holding fixtures, and adaptors for various measurement setups.
Maintenance: Proper care and maintenance are essential to keep these indicators accurate and reliable. Regular calibration and cleaning are recommended to ensure accurate measurements.
Brown & Sharpe test indicators are trusted tools in the field of dimensional measurement, assisting professionals in maintaining quality and precision in their work. Their reputation for accuracy and reliability has made them a popular choice in various industrial applications.
Below you can find our editor's choice of the best brown sharpe test indicators on the market
TESA Brown & Sharpe Brown & Sharpe, 01889023, Dial Test Indicator, 0.0004 in.
TESA Brown & Sharpe
Product description
Brown & Sharpe Valueline Dial Test, Lever Type Indicator, 1.5" Dial Diameter, 0.0005" Dial Division, 0.030" Range, 0-15-0 Marking, Black Face.
- Country Of Origin: China
- Model Number: ERROR:#N/A
- Item Product Dimension: 4.0" L x 2.25" W x 1.25" H
- Item Package Weight: 0.25 lb
User questions & answers
| Question: | What is ball dimension on indicator |
| Answer: | Possible but it must be in direct contact with the concrete. If this is a residential 1/2" line behind concrete, mounted not in the block, then no. If this is a line that is larger and it is in direct contact with the concrete, then the answer above is correct. The convection of the hw running and the conduction of the line will allow a temp difference on the concrete exterior and will possibly show its location and path. |
| Question: | Is there a replacement number for the contact point on this indicator? i have purchased several now that have not fit |
| Answer: | Yes |
| Question: | Does this have a pivoting stem at the top |
| Answer: | It should work |
| Question: | I am looking for a replacement point for this Brown & Sharpe valueline indicator |
| Answer: | It will detect even very slight temperature variations, so it might be possible. |
Brown & Sharpe 599-7030-80R Ruby Tip Contact Point for Bestest Dial Test Indicator, 0.080" Tip Dia. x 1/2" Length, M1.4 x 0.03 Thread
Hexagon Metrology
Product description
- Contact point for use with Brown & Sharpe Bestest series dial test indicators
- Ruby (synthetic sapphire) ball tip for light weight, wear resistance, stability with changes in temperature, suitable for delicate and silicon carbide surfaces, and non-magnetic and non-conductive properties for use in Electrical Discharge Machining (EDM) processes
- M1.4x0.3 thread
User questions & answers
| Question: | What is the thread size, M1.4x0.3 thread OR M1.4x0.03 thread? I have a B&S Bestest 599-7034-5 indicator |
| Answer: | Hello and thank you for reaching out to us. The AF-5000 is excellent for reading up to 10GHz, and is our newest model for reading up to 10GHz under RF mode. It also has a bright colorful display, and many features that are not available on other hand held devices that are on the lower end. I hope that this helps. |
| Question: | Would this work in a mitutoyo indicator |
| Answer: | Hello and thank you for reaching out to us. The frequency range for the Latnex AF-5000 is 50MHz to 10 GHz for HF RF radiation. I hope that this helps. |
Brown & Sharpe TESA 74.106931 Swivel Holder for Dial Test Indicator, 0.375" Stem
TESA Brown & Sharpe
Product description
- Axial support for mounting Brown & Sharpe Bestest series dial test indicators (sold separately) on a dovetail or a rod
- Hinges allow the indicator to swivel for accurate positioning
- Measures 5-1/4" long and the support mounting stem is 3/8"
User questions & answers
| Question: | is it made china |
| Answer: | It's 1.4x.3, ruby tips are always the way to go. |
| Question: | Does this have a hole in the end to hold an interapid stem |
| Answer: | The thing to do is go to each website,and find out the thread size..(ex,4-40 or M2 X 0.4) of the contact point..as one is Swiss made,and the other is Japanese..there is a good chance they will not match up..Each company does make an extended contact point for their dial test indicators..both these companies still make fine quality measurement equipment..I happen to have one of each. |
TESA Brown & Sharpe 74.111370 Interapid 312 Dial Test Indicator, Horizontal Type, M1.7x4 Thread, 0.157" Stem Dia., White Dial, 0-15-0 Reading, 1.5" Dial Dia., 0-0.06" Range, 0.0005" Graduation, +/-0.01mm Accuracy - 312b-1
TESA Brown & Sharpe
Product description
- TESA Interapid dial test indicator with rotatable, white face and carbide tip for measuring surface variations in narrow or recessed areas
- Continuous clockwise pointer rotation and revolution counter, and ball-bearing lever system swivels through to 210 degrees
- Dial face mounted parallel to the insert's axis, and has a dovetail and swiveling shank for mounting horizontally or vertically from the front, top, or back of the indicator
- Monoblock body design with jeweled bearings in an isolated assembly for high accuracy, and full metal construction provides durability
- Meets Deutsches Institut fur Normung (DIN) 2270, and Norme Francaise (French Institute for Standardization) NF E 11-053 standards, and includes a declaration of conformity
User questions & answers
| Question: | What is difference between 74.111370 vs |
| Answer: | Brown & Sharpe Mfr Part #:599-7049 |
| Question: | Good morning, can the ball contact be adjusted? if so, will this affect accuracy |
| Answer: | no just a dove tail |
| Question: | Where can I purchase a replacement tip |
| Answer: | I looked for one also with a 1.75" length, I could not find one. I also called vendors who carried the same test indicator and they could not locate one. I ended up buying a second indicator with the long "pin" (a different brand). Having said that I still like this one very much. |
| Question: | can I get a .030 ball tip for this indicator and is it available |
| Answer: | yes stand included and shipped with a solid wooden box |
Brown & Sharpe 599-7033-5 Dial Test Indicator Set, M1.4x0.3 Thread, Black Dial, 0-4-0 Reading, 1.5" Dial Dia., 0-0.008" Range, 0.00005" Graduation, +/-0.0001" Accuracy
TESA Brown & Sharpe
Product description
- Bestest-5 dial test indicator with rotatable black face and carbide tip for measuring surface variations in narrow or recessed areas
- Continuous clockwise pointer rotation displays units in fractional inches, and ball-bearing lever system swivels through to 180 degrees
- Dial face mounted at the top of the indicator parallel to the axis, and three universal dovetail mounts on the top, front, and back
- Monoblock body design with jeweled bearings in an isolated assembly for high accuracy, anti-magnetic for use around magnetic chucks, and corrosion-resistant chrome plating
- Meets Deutsches Institut fur Normung (DIN) 2270, and Norme Francaise (French Institute for Standardization) NF E 11-053 standards, and includes a Certificate of Accuracy and Traceability
User questions & answers
| Question: | Will i get a best test with swiss made on the dial and box |
| Answer: | It will fit any standard dovetail holder. This is a really good test indicator, BTW. |
| Question: | what is the length of the contact tip |
| Answer: | Brown & Sharpe tips are pretty standard and interchangeable. Just make sure that the tip length is the same or else you'll get a wrong reading. The tip diameter is a matter of preference. |
| Question: | Will this fit in a Starrett holder |
| Answer: | Negative this is made in Rhode Island solid item |
| Question: | I'm looking for the point that would fit this |
| Answer: | Yes, it does. |
Carbide Ball Contact Points for Dial Test Indicator M1.4x0.3 Thread 0.080" Tip Diameter 1-7/16" Length Compatible for Brown & Sharpe 599-7034-80
suxing
Product description
M1.4x0.3 Thread shank , 0.080" Diameter Carbide Ball,1-7/16" length.
- M1.4x0.3 Thread shank , 0.080" Diameter Carbide Ball,1-7/16" length.
- Tungsten carbide contact point are resistant to wear and magnetic fields.
- Compatible for Brown & Sharpe Bestest Dial Test Indicator .
- Package Include: 1 carbide contact point.
- Material:Tungsten carbide ball.
Brown & Sharpe 01889018 Valueline Dial Test, Lever Type Indicator 1" Dial Diameter, 0.0005" Dial Division, 0.030" Range, 0-15-0 Marking, Black Face
Hexagon Metrology
Product description
Brown & Sharpe Valueline Dial Test, Lever Type Indicator 1" Dial Diameter, 0.0005" Dial Division, 0.030" Range, 0-15-0 Marking, Black Face.
Brown & Sharpe 599-7030-15 Carbide Ball Contact Points for Bestest Dial Test Indicators, 0.015" Tip Dia. x 1/2" Length, M1.4x0.3 Thread
TESA Brown & Sharpe
Product description
- Contact point for use with Brown & Sharpe Bestest series dial test indicators
- Carbide contact point for wear- and magnetic-resistance
- M1.4x0.3 thread
TESA Brown & Sharpe 74.111377 Interapid 312 Dial Test Indicator, Vertical Type, M1.7x4 Thread, 0.157" Stem Dia., White Dial, 0-15-0 Reading, 1.5" Dial Dia., 0-0.06" Range, 0.0005" Graduation, +/-0.01mm Accuracy - 312B-1V
TESA Brown & Sharpe
Product description
- TESA Interapid dial test indicator with rotatable, white face and carbide tip for measuring surface variations in narrow or recessed areas
- Continuous clockwise pointer rotation and revolution counter, and ball-bearing lever system swivels through to 210 degrees
- Dial face mounted on the top at right angle to the insert's axis, and has a dovetail and swiveling shank for mounting horizontally or vertically from the front or back of the indicator
- Monoblock body design with jeweled bearings in an isolated assembly for high accuracy, and full metal construction provides durability
- Meets Deutsches Institut fur Normung (DIN) 2270, and Norme Francaise (French Institute for Standardization) NF E 11-053 standards, and includes a declaration of conformity
User questions & answers
| Question: | Is the needle supposed to be straight up and down? Brand new and it's off |
| Answer: | Yes. Mine came with swiss made on the dial and on the label on the box. |
| Question: | What is the size if the dial of thre vertical read? 1 inch or 1.5 inches |
| Answer: | The point length is 1 7/16" long according to other places I googled the manufactures item number. I have never actually measured mine but that seems to be pretty accurate. M.E. |
Brown & Sharpe TESA 74.106361 Carbide Ball Tip Measuring Insert for Interapid 312 Dial Test Indicators, 1.375" Length, 0.08" Stem Dia.
Hexagon Metrology
Product description
- TESA contact point for use with Brown & Sharpe Interapid series dial test indicators
- Carbide contact point for wear- and magnetic-resistance
- M1.6 thread
Ruby Ball Contact Points for Dial Test Indicator M1.4x0.3 Thread 0.080" Tip Diameter 1/2" Length Compatible for Brown & Sharpe 599-7030-80R
suxing
Product description
M1.4x0.3 Thread shank , 0.080" Diameter Ruby Ball,1/2" length.
- M1.4x0.3 Thread shank , 0.080" Diameter Ruby Ball,1/2" length.
- Ruby ball tip for light weight, wear resistance, stability with changes in temperature, suitable for delicate and silicon carbide surfaces, and non-magnetic and non-conductive properties for use in Electrical Discharge Machining (EDM) processes.
- Compatible for Brown & Sharpe Bestest Dial Test Indicator .
- Package Include: 1 Ruby contact point.
Brown & Sharpe 74.111489 Chrome Contact Point for Interapid Dial Test Indicators, 0.812" Length, 0.08" Stem Dia.
TESA Brown & Sharpe
Product description
- Contact point for use with Brown & Sharpe Interapid series dial test indicators
- Chrome contact point for general purpose use
- M1.7x4 thread
Brown & Sharpe TESA 18.10010 Tesatast Dial Test Indicator, Top Mounted, M1.4x0.3 Thread, 2mm Stem Dia., Yellow Dial, 0-100-0 Reading, 38mm Dial Dia., 0-0.2mm Range, 0.002mm Graduation, +/-0.002mm Accuracy
Hexagon Metrology
Product description
- Tesatast dial test indicator with rotatable, white or yellow face and carbide tip for measuring surface variations in narrow or recessed areas
- Continuous clockwise pointer rotation displays units in fractional millimeters (mm), and ball-bearing lever system swivels through to 180 degrees
- Dial face mounted at the top of the indicator parallel to the axis, and three universal dovetail mounts on the top, front, and back
- Monoblock body design with jeweled bearings in an isolated assembly for high accuracy, anti-magnetic for use around magnetic chucks, and corrosion-resistant chrome plating
- Meets Deutsches Institut fur Normung (DIN) 2270, and Norme Francaise (French Institute for Standardization) NF E 11-053 standards, and includes an identification number and a declaration of conformity
Latest Reviews
View all
Redken Hair Color Products
- Updated: 29.05.2023
- Read reviews
Mattel Kids Games
- Updated: 16.02.2023
- Read reviews
Harness Kit For Radio Chevy Silverado 2006
- Updated: 12.06.2023
- Read reviews
Ball Rope For Dogs
- Updated: 28.07.2023
- Read reviews
Bed For Side Sleepers
- Updated: 15.01.2023
- Read reviews