14 best driveway sealers

Product description

ABOUT US

Our long-lasting Premium Driveway Sealant is strengthened by 5x polymer modification for unmatched durability and peak performance. For over 50 years, the Jetcoat name has stood for quality and performance. Today, Jetcoat continues to be a leader and innovator of driveway, roof, foundation and specialty coatings to meet the performance and environmental requirements of demanding professionals as well as the DIY and Agricultural markets.



APPLICATION

Stir sealer to a uniform consistency and continue to stir throughout application. With pavement still damp, apply a uniform coat of sealer, being sure to avoid heavy or uneven application which may result in cracking or tracking. A second coat should be applied after the first coat has dried “to the touch” or within 24 hours at stated coverage rate. A rubber squeegee or brush is recommended for application. Depending on pavement porosity, coverage will vary from 250-350 sq. ft. per pail. (For Vehicle traffic, you must allow 24 hours for product to completely cure.)

• LONG-LASTING SEALANT - This asphalt driveway filler is polymer-modified and emulsion based for ultimate sealing power. Fortified with sand for added filling, slip resistance, and durability, Jetcoat Premium Driveway Filler and Sealer is designed to enhance and protect asphalt pavement surfaces.
• MULTIPLE USES - Use this extra strength driveway filler on all types of asphalt pavements and blacktop surfaces. Do not use on concrete or masonry surfaces.
• READY TO USE - This sealant comes ready to fill and seal any blacktop surface. Simply stir the sealer to a uniform consistency and continue to stir throughout the application process.
• EASY APPLICATION - With the pavement still damp, apply a uniform coat of sealer. To prevent cracking or tracking, avoid heavy or uneven application. A rubber squeegee or brush is recommended for application.
• SECOND COAT FOR STRENGTH - A second coat of the sealant should be applied after the first coat has dried and is smooth to the touch, or within 24 hours. Depending on pavement porosity, coverage will vary from 250-350 sq. ft per pail.

User questions & answers

Question:	Can someone please tell me how much sealer is in the pail
Answer:	4,75 US GAL
Question:	Can I use it on concrete
Answer:	Sure can.
Question:	what is used to clean up tools
Answer:	I returned this item Very inferior product

Product description

This asphalt sealer can be used to restore the appearance and waterproof properties of driveways and other asphalt surfaces. It helps to protect against damage from automotive chemicals, de-icing salts, and everyday weathering. Sealer, Asphalt, 4.75 gal., Pail This product contains a chemical that is regulated under California Proposition 65. Warning: This product contains a chemical known to the State of California to cause cancer. -

• USA

User questions & answers

Question:	What is the drying time
Answer:	In the hot sun it was dry to the touch very quickly. Maybe 1-2 hours. But, we didn’t drive on it for at least 24 hours.
Question:	How do you apply this asphalt filler/sealer
Answer:	Asphalt broom, has broom on one side and rubber flat surface on the other side
Question:	does it feel small cracks in
Answer:	Nothing more than a hairline width.
Question:	Can you mix white paint or a toner to get grey for our maintenance shop
Answer:	I would call the company, they were very helpful and knowable about their product and and variarations in applying.

• CLEAR PROTECTION – Provides a long-lasting, non-glossy invisible coat to concrete surfaces. Will never leave any residue or alter the color or appearance of your concrete driveway, sidewalk, or patio. Masonry waterproofer that will last for up to 5 years
• WATER REPELLENT – Water-based eco-friendly silane/siloxane rain guard penetrating concrete sealer that bonds with the minerals in concrete and masonry to provide with you long-lasting water protection. The breathable sealer causes the water to bead instead of seeping into the concrete
• POWERFUL CONCRETE SEALER – Keep your driveway looking new and protect it or other concrete surfaces from pitting or cracking. Best suited to protect against ice melt salts or chloride ions, freeze thaw damage, efflorescence stains, and more.
• EASY TO APPLY – First step is to ensure your concrete surface is fully cleaned and clear of dirt, dust, grease, oil, efflorescence, etc. Use a low-pressure pump-up garden sprayer to evenly coat your driveway. Avoid puddling or ponding. 1 gallon will give 90-150 sq.ft. of coverage
• 3 YEAR WARRANTY – MasonryDefender offers a 3 Year Limited Warranty on Horizontal Concrete Surfaces

User questions & answers

Question:	What is the silane and siloxane percentage
Answer:	No idea, not on label
Question:	I applied this to my concrete patio last year. Can I apply it again this year without stripping the previous coat off (I will power wash first
Answer:	I have in the past applied the year after the initial coat. It seemed to work well. I would not use a power washer, however, since that might strip the previous year's coat.
Question:	is this sold in local big box stores
Answer:	No. Only from the web.
Question:	Can this product go over another brand of sealer
Answer:	I did and have seen no negative effects, but I have been disappointed in the product in that rain does not bead up as on other dealers.

Product features

1 Gallon MasonryDefender Concrete Driveway Sealer

Our 1 gallon of Concrete Driveway Sealer can cover a range from 90-150 sq. ft. per gallon depending on surface porosity.

Before applying to your concrete, please make sure that the surface is completely clean and allowed to dry for at least 6 hours.

We recommend cleaning with our MasonryDefender All Purpose Masonry & Concrete Cleaner to remove all dirt, grease, oils, efflorescence, wax, curing compounds, coatings or other foreign matter that might block or interfere with product penetration.

Properly Protects Your Concrete Surface

Use the MasonryDefender Concrete Sealer to fully protect your driveway as well as brightening the appearance.

Protects against cracking and pitting that is caused moisture that seeps into the concrete over time.

After the solution is applied, water will now bead instead of seeping into your driveway causing more damage.

Future maintenance will be much easier. Simply clear off any dirt, pollen, mildew, or leaves with a broom or garden hose.

The surface of your concrete driveway, patio, or sidewalk will now be fully protected from mold, mildew and moisture. No longer waste your time power washing your driveway for hours. Stay fully protected for up to 5 years.

How To Apply The Concrete Sealer

Please make sure that the air and driveway temperature is a minimum of 40°F and a maximum of 100°F for three hours following application.

Once your surface is free and clear of any dirt and debris, use a low pressure pump-up garden sprayer to apply a thin, even layer. The use of a sprayer will allow you to evenly coat your driveway.

The surface should remain wet for 2-3 minutes before final absorption.

Avoid puddling or ponding; brush or broom to spread material until the sealer thoroughly penetrates the surface.

Surface will be dry in 2-6 hours, depending on temperature and humidity. Allow 24 hours before driving on surface.

Product description

Asphalt crack filler provides a durable, flexible and weather-resistant seal for cracks and joints in asphalt driveways, parking lots and more. It provides excellent adhesion and prevents water and frost damage. Click on the Red Devil link at the top of this page to see more quality products from Red Devil.

From the Manufacturer

Acrylic asphalt sealant that provides a durable, flexible & water resistant seal for cracks and joints in asphalt driveways, parking lots and more.

• COLORED & TEXTURED LIKE ASPHALT: Provides an excellent color and texture match to asphalt surfaces
• FORMS A WATERTIGHT SEAL: Use to fill cracks for a durable repair
• STAYS FLEXIBLE: Resists cracking and is weatherproof
• ADHERES TO DAMP SURFACES: Can be used in wet conditions
• WATER CLEAN UP: Cleans up easily with soap and water

User questions & answers

Question:	For a cut line appr. 3" deep, is it necessary to fill completely or can I just run a bead to fill top 1/2" or so. Will it collapse into void below
Answer:	Your best bet would be to fill the void with material first....ie, stone dust or something like it that will pack down. Your correct, your bead will collapse if you don't build up the crack first.
Question:	Can i put it after sealing the driveway for cracks
Answer:	Hi, yes you can, but for the best look, I would fill the cracks 1st and then use the coating, it makes the job look even better! Thanks!
Question:	How many LF does one tube fill
Answer:	When cutting the tube feeder to about 1/2" I was able to fill about 5-feet of 1/4 to 1/2 crack.
Question:	Will this product prevent weeds/grass growing in sidewalk/driveway “seams
Answer:	I used this two or three years ago. I first pulled any weeds or grass growing in the seam and I am sure I didn't get all of the roots. Then applied this product. Nothing has grown back, yet. If there are a lot of weeds or grass growing in the seam, maybe use a weed killer first.

Product features

Red Devil Blacktop Acrylic Repair Sealant

Acrylic asphalt sealant that provides a durable, flexible and weather-resistant seal for cracks and joints in asphalt driveways, parking lots and more. It provides excellent adhesion and prevents water and frost damage.

User questions & answers

Question:	Is heating this product required
Answer:	No heating. It is like a heavy paint and required heavy mixing before use. I use a power drill and paint mixer paddle. But needs to be used at temperatures above 70F so it can dry.
Question:	Can this be used on recycled asphalt millings
Answer:	No.. this stuff it’s going to allow you to recycle or fill cracks. It’s more like paint. It won’t work to fill any cracks or mix it with gravel..
Question:	How much area does 1 bucket cover
Answer:	About 20x20 feet
Question:	How do you apply it apply
Answer:	I pour a little out enough to cover about 6-8 sq ft and then use an applicator that has a broom on one side and a squeegee on the other. I brush the sealer on to fill the cracks and then use the squeegee to move the excess to the next area to be covered.

• Water-Based Silane & Siloxane for Concrete, Brick, Block, Pavers, and other Porous Masonry.
• Non-Film Forming. Clear/Matte Finish. Non-Slip. For Indoor or Outdoor Use
• Unbeatable Service Life. Up to 7-Years of Protection.
• Excellent Water-Repellency. Prevents Damage Caused by Salts and De-Icing Chemicals.
• For Patios, Driveways, Pool Decks, Garages, Shop Floors, Sidewalks and Walkways

User questions & answers

Question:	Can this be used on exposed aggregate concrete. If not, can you recommend something
Answer:	DryWay can be used, but not advised. Our LastiSeal Brick & Concrete Sealer would be the better choice of sealer. If you are looking for a glossy finish, use an acrylic sealant.
Question:	what type of sprayer is recommended
Answer:	I would (and did) use an 18”roller. A sprayer will not put down enough product. However, I’m not pleased with this product overall and would recommend you use a different waterproofer.
Question:	Has anyone uses this product to seal the concrete floor in a garage? Just built a new garage and want to find somthat will prevent oil stains and what not. Thanks
Answer:	It's an excellent product that would certainly work. I would be more inclined to use epoxy in the garage however.
Question:	When applying this product does the temperature of the concrete and surround air matter? What is the recommended range
Answer:	The instructions tell you to apply the product when air and surface temperatures are between 45 and 90 degrees. I applied in the summer, but waited until late afternoon when the sun was not shining on the surface. I applied with a 3/8" nap roller. The instructions tell you to put on a thin layer, which is pretty much what I did. I just tried to spread the liquid evenly. Sometimes it would pool lightly, but that didn't seem to cause a problem. Within a few minutes, it was drying and it eventually dried evenly. It has been months now and the surface still obviously has the sealer on it. It's not visible, but when the lawn is watered, the water doesn't sink into the concrete. A thin layer of water stays on top of the concrete. So it definitely works as advertised. But I can tell you this. The sealer will not prevent the black algae fungus that typically develops on concrete from forming. I live in Florida, and that already is beginning to happen to my sealed concrete. So you're going to need to clean the concrete eventually after you've sealed it. I think sealing the concrete will prevent oil leaks from penetrating deep into the concrete as they typically do. But it won't stop the fungus from forming.

Product features

DryWay Water-Repellent Concrete Sealer

DryWay Concrete Sealer waterproofs and protects concrete driveways, sidewalks, garage floors, patios, bricks, pavers, and pool decks against water damage, chemical spills, road salts, and freeze-thaw.

Forms a water-repellent barrier below the concrete surface. Seals against deep water penetration, allowing concrete to dry fast!

Will bead or shed surface water, vehicular fluids, and chemical spills. Improves yearly maintenance and lasts for years. Reduces organic growth and lichen on surfaces.

• Water based, breathable, low VOC, high solids Silane Siloxane sealer that can be used on unsealed interior and exterior, vertical and horizontal concrete, brick, pavers, flagstone, and slate.
• Approved by the Department of Transportation in several states as a penetrating concrete sealer for use on roadways and bridgedecks to reduce damage and deterioration caused by water absorption.
• Will maintain the natural, unsealed look and feel of the substrate. Won't leave behind a slippery surface film, won't change the look or color.
• Easy to apply with a pump sprayer! Two back-to-back coats will yield up to 7-10 years of protection!
• Contains up to 10X more active ingredients than competing products. Manufactured in the USA! No recycled or imported resins in our formulas!

User questions & answers

Question:	I’m looking to seal with a natural matte finish; in other words no wet look. does this have a gloss/wet look finish
Answer:	No gloss look. When dry looks the same as before it was applied. When rains it puddles in some places. It was exactly the look I wanted around my pool.
Question:	After you open this product, what is the shelf life by which the remainder must be used
Answer:	Stored at room temperature the SX5000WB will last at least one year. It's not uncommon for the product to still be usable closer to two years.
Question:	Will this reduce Radon gas
Answer:	This is a sealant for pavers, etc. Radon Gas: no! You may need to see a contractor.
Question:	Do you have a product with a longer life span? I
Answer:	7-10 years is typical for a high quality, high solids Silane-Siloxane water repellent sealer. That is considered to be the max life of any good water repellent. The only type of sealer that is longer lasting is a silicate sealers like the Armor S2000 or Armor L3000. Silicate sealers chemically react to form a calcium silicate hydrate barrier within the pores that reduces the sizes of the pores, therefore increasing the strength and density. The calcium silicate hydrate can only be removed when the concrete itself is removed. Silicate sealers don't cause water and other liquids to bead off the surface however. The only benefit you get with a silicate sealer is an increase in strength and density.

Product features

How Does It Work?

The Armor SX5000 WB penetrates into the substrate where it chemically reacts to form a hydrophobic (water repellent) barrier within the pores. The hydrophobic barrier, which can last for up to 7-10 years, will reduce the absorption of surface water by up to 95%! By reducing the absorption of water on the surface, damage and deterioration caused by water absorption, such as cracking, spalling, and pitting will also be reduced. Even after the bead goes away, you will notice that the sealed surface dries faster and looks cleaner for years.

Uses

The Armor SX5000 WB is the perfect sealer for unsealed concrete, paver, brick, stucco and natural stone surfaces. If you want to protect your substrate without changing the look or color, the Armor SX5000 WB is the best sealer for your application. Common applications include concrete and paver driveways, walkways, brick patios, pool decks, garage floors, above grade foundation walls, cinderblock retaining walls, basements, and chimneys.

The Armor SX5000 WB helps to reduce damage and deterioration caused by water absorption such as cracking, spalling, and pitting.

Coverage & How to Apply

Coverage:

One gallon of the Armor SX5000 WB will cover up to 175 square feet per coat. Two coats are recommended to achieve the maximum life and performance benefits. Coverage can vary depending on the porosity of substrate and the application method.

Application:

The Armor SX5000 WB is very easy to apply.

Step 1: Make sure the surface is clean, dry, and free of any other sealers or coatings. If the surface has been pressure washed, allow at least 24 hours for the substrate to completely dry.

Step 2: Using a roller or sprayer, apply 1 even coat. While the surface is still wet, apply a second coat.

Step 3: Allow the surface 24 hours to fully react and dry. Do not apply if it is expected to rain within 24 hours. Ensure any irrigation systems are turned off, or directed away from the newly sealed surface.

Frequently Asked Questions

Will this give me a wet look? No, the Armor SX5000 WB will not give you a wet look. The Armor SX5000 WB will not change the look or color and you surface will look exactly as it did before being sealed. If you want a wet look sealer, consider the Armor WL550, Armor AR350, or Armor AR500.

Will the surface be slippery when wet? No, the Armor SX5000 WB will not leave behind a slippery surface film. It works entirely below the surface in the pores.

Is the product UV stable? The Armor SX5000 WB works below the surface, inside the substrate and is not exposed to UV rays.

How long does the product last? The Armor SX5000 WB can last for up to 7-10 years before the need to reseal. While the surface water bead isn't visible on all surfaces, the product is still working hard from within the pores. You will notice sealed surfaces dry faster than unsealed surfaces, and sealed surfaces are easier to clean and keep clean.

• Penetrating high solids, breathable solvent based acrylic coating with unmatched bonding characteristics.
• Durable, long lasting. Stands up to abrasion, UV rays, hot tire pick up, hot and cold temperatures.
• Long lasting high gloss finish provides up to 2-5 years of life on a two coat application before the need for a recoat. Will bring out color in dull and faded surfaces.
• Can be used on poured concrete, stamped concrete, concrete pavers, aggregate, and more.
• Can be used on unsealed surfaces, or on surfaces previously sealed with a solvent based acrylic.

User questions & answers

Question:	can it be used on flagstone
Answer:	The AR500 should not be applied to Flagstone. Acrylics usually delaminate prematurely from natural stone and clay surfaces.
Question:	Can this also be used for wet cast pavers/block
Answer:	Yes, in the product description it says poured concrete and concrete pavers. It just says not to use it for brick or natural stone. Wet cast is pretty much the same thing as poured concrete which is what this product is used for.
Question:	Can I use it on top of Behr wet look water based silicate sealer
Answer:	The AR500 should not be used over Behr wet look sealers (compatibility issue).
Question:	I have a patio and a side walk I'm considering doing. Other than cleaning the surface, how is this applied
Answer:	Hi! The key with any acrylic is making sure that the surface is completely dry. Once you have cleaned it, allow it to dry for 24 hours before applying the AR500. It is best to apply the AR500 in the late afternoon or early evening, when the concrete has had a chance to cool from exposure to the hot sun. You can apply it with a 3/8"-1/2" shedless nap roller. Two coats are suggested if this is your first time sealing so get a nice consistent gloss. Space the coats out 12-24 hours. Please let me know if you have any other questions!

Product features

Frequently Asked Questions

Will the surface be slippery when wet? Yes, the surface may be slippery when wet because the sealer prevents water from absorbing into the surface. Foundation Armor manufactures a fine non-slip additive and a coarse non-slip additive that can easily be mixed into the sealer before applying.

How long does the sealer last? The Armor AR500 can last up to 2-5 years before the need to reseal. Surface porosity, environment, surface abrasion, and the amount of material applied will ultimately determine the life of the sealer. Typically, exterior substrates are sealed every 1-3 years and interior substrates are sealed every 3-7 years.

Is the Armor AR500 breathable? Yes, the Armor AR500 is a breathable acrylic sealer.

Is the Armor AR500 UV stable? Yes, the Armor AR500 is UV stable and will not yellow from exposure to UV rays.

What if I want a low gloss? If you want a low gloss consider the Armor AR350 instead.

About Foundation Armor

Foundation Armor is a family owned and operated business. We take pride in the quality of our products, the accuracy of our information, and the honesty of our technicians and sales staff. We will never promise a product will do something it can’t, we won’t make false claims or warranties, and we won’t sell you a product if it isn’t appropriate for your application. Our products are manufactured in the USA, and we don’t use any recycled or imported resins in any of our formulas. We are always available to our customers to help with everything from product selection and application, to maintenance and reapplication. Our customers are our top priority and your satisfaction is very important to us!

Product description

The Latex-ite Airport Grade Driveway Filler Sealer is an asphalt emulsion-based low-VOC formula designed to beautify and protect your blacktop driveway. This non-skid sealer fills hairline cracks (1/8 in. or less) and is polymer fortified for added durability. Helpful hints before you seal your driveway: 1) Purchase an extra pail: any unused portion can be saved for touch-ups (running out during the project may result in color variations). 2) Flip pails overnight prior to application (it will be much easier to mix in the morning and will ensure consistency). 3) Do the project all at one time without starting and stopping. 4) Check the weather and make sure no rain is forecasted and it is at least 55 degrees F at night (a cold driveway will not allow the sealer to cure properly). 5) Check latexite.com for further tips and how-to videos. (Please note: if product is not available to order in your area, it is due to nighttime temperatures.)

• Fills, seals driveways; up to 400 sq. ft. per pail
• One-coat formula; polymer fortified for strength, longevity
• EZ-stir, non-skid, low-VOC formula creates a beautiful surface

User questions & answers

Question:	What does a pail of this product weigh
Answer:	50 pounds! I had to have my strong son carry it into my garage.
Question:	Is this cost for one (1) bucket. I can buy the same size bucket at Home Depot for
Answer:	Yes it’s almost 5 gallons. My dad recommends this brand. He’s used it for years.
Question:	It hasn't dried after 2 days (no rain, warm temperatures) - what can we do to make it 'drive-able
Answer:	Did you apply it too thick? Can you squeegee it to remove excess. A lite layer of sprinkled sand? Good luck
Question:	What do i use to spread this with
Answer:	A stand up trowel or paint brush is what we used

Product description

Wet Look Sealer from Black Diamond Stoneworks seals and provides a beautiful gloss finish. Treating your pavers, stone, slate, concrete, brick, driveways and garage floors with WET LOOK SEALER will make them look and shine beautifully. WET LOOK STONE SEALER is the one product you will need for INTERIOR or EXTERIOR applications to beautify and protect. Wet Look Sealer provides excellent resistance to wear, chemicals, water and UV rays. Adds shine and protection to slate, natural stone, pavers and all other masonry surfaces! WILL NOT DARKEN SURFACE. Durable, clear and non-yellowing. Water clean-up makes Wet Look Sealer easy to use. Wet Look Gallon Covers approx. 600 sq Ft. Wet Look Sealer is a part of Black Diamond's STONEWORKS' line. This is our premium line of natural stone cleaners & sealers. They are designed to help you easily maintain and protect all of the surfaces in your home or business. STONEWORKS cleaners and sealers are designed to offer you the perfect combination of unequaled product performance and value! Made in the USA. Designed, Tested and Used by Stone and Tile care Professionals!

From the Manufacturer

Treating Your pavers, stone , slate, concrete or brick with WET LOOK STONE SEALER will make them look and shine beautifully. WET LOOK STONE SEALER is the one product you will need for INTERIOR or EXTERIOR applications to beautify and protect. Wet Look Stone Sealer provides excellent resistance to wear, chemicals, water and UV rays. Adds shine and protection to slate, natural stone, pavers and all other masonry surfaces! Does not darken stone. Durable, clear and non-yellowing. Water clean up makes Wet Look Sealer easy to use.

• BEAUTIFUL WET LOOK SEALER Works on exposed aggregate, stamped, colored or decorative surfaces
• WILL NOT SIGNIFICANTLY DARKEN MOST SURFACEs when it dries. Does not look like you sprayed water on it. Resists chemicals and oil, Durable, Clear & Non-Yellowing.
• PLEASE READ COMPLETE PRODUCT DESCRIPTION: Not for polished GRANITE OR MARBLE
• SPRAY, BRUSH OR ROLL on concrete, pavers, slate, driveways, garage floors, patios, masonry, brick warehouse floors
• MADE IN THE USA. Professional Results VERY low odor dries in hours.

User questions & answers

Question:	After applying, how long do i have to wait before i can cut my tile
Answer:	24-48 Hours.
Question:	fire pit sealers for hi heat
Answer:	I'd have to say no on that one. It could probably take a little heat but anything close to direct flames, forget it.
Question:	My intent is to use this at an entry door, I live in Seattle, will this make the stone slick
Answer:	I don't know for sure, but with the way it looks and feels on my table, I would think that yes, it will make the stone slick.
Question:	How do you apply it? Brush, spray bottle, pesticide spray hose etc? I'll be using it for about 30 stones approx 7"x
Answer:	We applied it to a slate floor with a wool pad applicator, made for applying floor finishes. Worked well. We were going to use a paint roller, but since the instructions didn't mention that in its list of ways to apply, I was worried it may create bubbles or cause problems. The instructions do list a pad applicator, paint brush, or low presure sprayer. The consistemcy out of the bottle is about like skim milk, or watered down Elmers glue. Dries within an hour, pleasant smell, easy to work with. Did 3 coats. We are extremely pleased with the results.

Product description

This concrete sealer penetrates within the concrete to protect not only the surface of the concrete but also below the surface of the concrete for best protection long term.

• IMPRESS YOUR NEIGHBORS FOR YEARS: ToughCrete concrete sealer is the #1 siloxane penetrating sealer for protecting your driveway, sidewalk, garage floor, patio, or any other concrete surface. Unlike cheap acrylic concrete sealers, which only last about one year and usually don’t provide a full seal, ToughCrete penetrates deep into your concrete surface for 10+ years of protection from things like deterioration, water, and salt damage making it the best penetrating sealer.
• IMPROVED HOME VALUE : By protecting the life of your concrete driveway, sidewalks, patio, garage floor, and more allowing them to last longer, will help to improve the value of your home! Also works great as paver, block, cinder block, CMU, brick, chimney, and outdoor fireplace sealers.
• QUEST FOR BETTER HOME CARE: As a company, we build our products around a foundation of better home care for the average consumer. ToughCrete is a SAFE & Eco-friendly siloxane concrete penetrating sealer approved by the department of transportation. Made with the highest quality formula for complete protection.
• 10 YEARS TOUGH PROMISE: We know it works and we’re giving you 10 years to try it out. If you don’t like it, just let us know and we will provide a full refund.

User questions & answers

Question:	Will toughcrete 8500 work on a garage floor that has already started to pit
Answer:	My garage floor was pitted due to road salt in the Chicagoland area. I scrubbed and scraped the pitted areas with a metal ice breaking bar to remove any loose material, washed it with concrete cleaner and then applied the Toughcrete. It's been two winters now and I don't see any new or worsening pitting.
Question:	I have a new garage with new concrete. can i apply this before we start using it or do i have to wait? also can i apply colored sealer over it later
Answer:	Ideally you should wait approximately one month for the concrete to fully cure after it is poured to apply ToughCrete - at that point you are definitely safe to apply ToughCrete. To answer your second question, applying a colored sealer later on is going to be fine. ToughCrete is a breathable sealer and will penetrate into the capillaries of the concrete and prevent water absorption and the surface of the concrete (after some time and wear and tear) should be in good shape for a colored sealer to go over top. There should be no adhesion issues but we always recommend doing a test sample prior to applying another product over top of ToughCrete to ensure the adhesion is acceptable. Let us know if you have any other questions!
Question:	Can this sealer be applied over an acid etching stain
Answer:	Yes. Once the acid etching stain is fully cured you can apply ToughCrete. Let us know if you have any other questions! Thanks.
Question:	Does this sealer leave a gloss on the concrete or does it dry with a matte finish
Answer:	ToughCrete leaves no gloss at all. Most of the time it doesn't even darken the concrete at all after it dries. If you're looking for a sealer that will provide sheen or gloss this is not the product, otherwise, TouchCrete is just what you're looking for! Let us know if you have any additional questions! Thanks!

• BEST VALUE ON AMAZON – The Essential Values Concrete & Stone Sealer Finish is The Best Concrete Sealer for Protecting and Finishing Driveways, Sidewalks, Garage Floors, Patios, and Other Concrete Surfaces! Not Limited to Outdoors Alone, Safe for Use Indoors: Pavers, Cinder Blocks, Bricks, Chimney’s and Fireplaces!
• IMPRESS YOUR NEIGBORS – Not like Other Cheap Acrylic Sealers That Do Not Provide a Full Seal! With Essential Values Concrete & Stone Sealer Finish, Become the Driveway of the Neighborhood for Years to Come While Safe & Eco-Friendly ***Approved by the DOT***. Made from the Markets Highest Quality of Siloxane Ingredients, You Will Not Be Disappointed!
• KEEPS MOSITURE OUT – Keep Your Driveway Looking New and Protect it and other Concrete & Stone Finishes from Spalling, Degrading, Pitting or Cracking! Protect your Investment and Save More with Your Essential Values Protectant Seal – Designed to Tolerate and Protect Surface from Salts, Ions, Stains, Mildew, Fungus, & Freezing and Thawing
• EASY TO APPLY – Simple to Use with A Beautifully Attractive Clear Finish! Covers up to 1500 SQUARE FOOT for Standard Care! If WET LOOK / HIGH GLOSS Desired, Apply 3 Coats and Allow 1 Hr To Dry Between Coats! ****For Best Results, Surfaces Need to Be Fully Cleaned from Dirt, Dust, Grease, Oil & Efflorescence****
• PROUDLY MADE IN USA – To Us, Quality Is Everything! That Is Why We Have Engineered, Tested, And Manufactured Our Concrete Sealer Right Here in The USA. If You Are Not Happy with Our Product, NO PROBLEM – Get Your Money Back Guaranteed!

User questions & answers

Question:	Is it water based for clean up
Answer:	Water based.
Question:	Will this work on my slate tile outside
Answer:	Manufacturer’s bottle says it will work on slate.
Question:	Can this work as a waterproofing sealant for basement walls to keep out dampness
Answer:	I would check with the manufacturer. They do not specifically state that it can be used to seal basement walls only that it can be used as a sealer on concrete, stone, pavers and the like.
Question:	Would this work long term on a concrete living room floor? I'm not wanting a high gloss finish
Answer:	Probably not what you would want to use. I used it outside on my patio pavers and it left a glossy finish on them.

Product features

INSTRUCTIONS:

Surface NEEDS to be dry, clean & free from grease, oil, wax, dirt and other sealers.

Essential Values Concrete & Stone Sealer comes READY TO APPLY with a plug and play experience.

Simply apply with brush, pad applicator, and/or low pressure sprayer in thin & even coats.

Allow 1 hour to dry before applying more than 1 coat. Do not thin or shake. Wait 24 hours or longer before allowing objects on surface. Wait 30 days before applying Sealer to any new surface,

Note:

Always test a small representative area for desired results before applying to entire surface

• WET LOOK, HIGH GLOSS: Give yourself the gift of outstanding curb appeal with the DOMINATOR SG+. It restores faded colors, gives off a high sheen, and improves the durability of your pavers or decorative concrete. Not intended for stone or clay pavers.
• PROTECT YOUR PAVER INVESTMENT: DOMINATOR SG+ is a breathable, film forming paver sealer that protects from oil stains, mold, mildew and other spills while providing incredible UV protection. DOMINATOR SG+ has low slip potential unlike most solvent based sealers.
• SOLVENT FREE: DOMINATOR SG+ provides the ultimate shine and color enhancement formula while also being solvent free and eco-friendly. Breathe easy while applying DOMINATOR SG+ since there are no foul odors. This makes for a seamless cleanup and application process.
• COVERAGE RATE: Your money goes farther with this product with our amazing coverage rate up to 400 square feet per gallon, per coat, and up to 5 years before resealing. You will save money and time by reducing maintenance when you seal with DOMINATOR SG+.
• EASY SPRAY ON APPLICATION: Sealing with DOMINATOR SG+ paver sealer is quick and easy using our application guide, that is included with every purchase, as well as our application videos. The product has an incredibly fast dry time between coats making it an easy one-day project, unlike most solvent based sealers.

User questions & answers

Question:	what sq footage you u get from a 5 gl container
Answer:	Anywhere from 1200 to 1500 sf per 5 gal container depending on the porosity of the surface
Question:	can you apply over previously applied sealer that has black color added? Previous sealer was Glaze-n-Seal
Answer:	I believe you can yes
Question:	Does this sealer have a shine or wet look to it
Answer:	It brings out the color in the paver and has a beautiful shine to it.
Question:	can you use on paver patios that have sand in the joints
Answer:	Dealers like this are commonly used on pavers. Use it sparingly. My experience was that it will get a white scale if applied to thick. I think some pro applicators dilute it with water.

Product features

How Does DOMINATOR Paver Sealer Protect My Paver Investment & Improve the Durability & Longevity of my Pavers?

Why do I need these supplies?

• The sprayer will help distribute the product more evenly on the surface. Any sprayer will work for our products, although high pressure sprayers will allow higher coverage rates.
• The roller should be used to back-roll any puddles or drips, and to smooth the sealer in textured areas. If you’ve re-sanded the paver joints, ensure that the sand is 1/8” below the top of the paver surface to avoid pulling it up on the roller.
• The extension pole will be used to attach to the roller handle and roller nap. This will allow you to roll onto the surface without bending over.
• The tape will be used to secure the protective paper or plastic on areas that you don't want the sealer to enhance, such as your doors, garage door, garden, ect.
• The protective paper (plastic or paper) will be used to block off the areas where you don't want sealer to be applied.

• Penetrating high solids acrylic coating with unmatched bonding characteristics.
• Durable, long lasting. Stands up to abrasion, hot tire pick up, hot and cold temperatures.
• High gloss finish. Will bring out color in dulled substrates.
• Can be used on poured concrete, stamped concrete, concrete pavers, and aggregate concrete.
• Great for exterior concrete driveways, patios and walkways.

User questions & answers

Question:	Can i use this over epoxy shield (with chips) garage floor coating to obtain a higher gloss finish
Answer:	Applying the AR500 acrylic sealer over epoxy is not recommended. We do have customers that apply the Foundation Armor UTN60 over the clear water based Armor Epoxy within the epoxy's recoat window (as soon as the Armor Epoxy is not tacky). The UTN60 is solvent based but still bonds exceptionally well to our water based Armor Epoxy for a high gloss finish that is chemical resistant and does not yellow. You may find that the UTN60 will bond and perform well over the Epoxy Shield when applied within its recoat window. If you have any technical questions about Epoxy Shield or compatible products, we recommend that you contact Rustoleum (the manufacturer).
Question:	After drying, is it slippery
Answer:	Hi! The Armor AR500 is an acrylic coating so it will leave a surface film that can be slippery when wet. We do offer a non-slip additive that can be mixed directly into the top coat before applying to provide you with more surface traction.
Question:	Anybody know about how long the smell lasts? Windows open and fans blowing the whole house still reeks giving the family a headache
Answer:	I used this product on my OUTDOOR patio and not inside my house so I could not tell you how long it smells. I don't think it's meant to be used inside.
Question:	Can I apply this to river rock exposed to daily full sun
Answer:	The AR500 is not recommended for natural stone.

Product features

Frequently Asked Questions

Will the surface be slippery when wet? Yes, the surface may be slippery when wet because the sealer prevents water from absorbing into the surface. Foundation Armor manufactures a fine non-slip additive and a coarse non-slip additive that can easily be mixed into the sealer before applying.

How long does the sealer last? The Armor AR500 can last up to 2-5 years before the need to reseal. Surface porosity, environment, surface abrasion, and the amount of material applied will ultimately determine the life of the sealer. Typically, exterior substrates are sealed every 1-3 years and interior substrates are sealed every 3-7 years.

Is the Armor AR500 breathable? Yes, the Armor AR500 is a breathable acrylic sealer.

Is the Armor AR500 UV stable? Yes, the Armor AR500 is UV stable and will not yellow from exposure to UV rays.

What if I want a low gloss? If you want a low gloss consider the Armor AR350 instead.

About Foundation Armor

Foundation Armor is a family owned and operated business. We take pride in the quality of our products, the accuracy of our information, and the honesty of our technicians and sales staff. We will never promise a product will do something it can’t, we won’t make false claims or warranties, and we won’t sell you a product if it isn’t appropriate for your application. Our products are manufactured in the USA, and we don’t use any recycled or imported resins in any of our formulas. We are always available to our customers to help with everything from product selection and application, to maintenance and reapplication. Our customers are our top priority and your satisfaction is very important to us!