12 best df multimeters

• ▲Quick and Accurate AC/DC Amp Clamp Meter- Auto-ranging clamp multimeter measuring AC/DC current, AC/DC voltage, Resistance, capacitance, continuity, Temperature, diode and Frequency(Hz) ; A perfect troubleshooting meter to help you solve automotive or household electrical problems quickly and safely
• ▲Non-Contact Voltage Detection & Overload Protection - If AC voltage detected, the visible LED lights will shine and the beeper will sound(range is 90V-1000V); Only when testing current, the flashlight of multimeter shines; Overload Protection & Double Insulation Protection avoid electric shock, protect users from touching dangerous areas
• ▲Multifunctional & Easy to read - High-Definition Large Back-lit LCD provides better visibility in dark working area; ZERO function makes for decrease the data error influenced by the earth magnetic field, help you to obtain more accurate measurement; Automatically enters sleep mode after 30 minutes of inactivity for energy conservation; Data hold function; Low battery indicator
• ▲Solid With Free Extra Test Leads : Supplied with free batteries and test leads, all in a carrying pouch for direct use; The test leads are easy to grip; The design is Ergonomic and portable for easy use, perfect for both professional or new users
• ▲ What You Get: 1x Tacklife CM06 Digital Clamp Meter, 2x Test Leads, 2x AAA Batteries, 1x User Manual, 24 month service; Be assured of purchase Tacklife CM06 digital clamp meter multimeter, Please contact us at the first time if the multimeter has any problem

User questions & answers

Question:	What is the DC current measurment capaility? Are there no specs for this meter other than it can read up to 600v
Answer:	It uses a Hall Effect sensor so the AC rating is the same as the DC rating. This website has the specs that confirms that: https://www.wantitall.co.za/tools/multimeter-tacklife-cm01a-clamp-meter-4000-counts-auto-ranging-digital-tester-with-ncv-ac-dc-voltage__b01n014use I tried it on my motorcycle, and it read the starting current of ~75A fine. The paper manual said the same. I can't find an electronic copy. The Amazon UK site has more info. It shows the range as 40A/400A https://www.amazon.co.uk/dp/B01N014CTB HTH.
Question:	Is this meter fast enough to indicate max current draw on the battery cable of a starting vehicle
Answer:	I have used a similar meter to watch the combined starting and glow plug current on a diesel Sprinter. No problem. Since this uses a Hall Effect sensor, instead of routing the 400 amps *through* the meter, overrange current pulses should not be a problem.
Question:	What is the resolution of the current reading
Answer:	While this meter reads to 1 milliamp that doesn’t necessarily mean that it is accurate to 1 milliamp. It drifts quite a bit in the milliamp range. You are given the option to zero it out before taking a reading, but it does continue to drift. It is a marvel that a Hall effect meter that can read DC is offered at this price, but don’t expect +/- 1 milliamp accuracy. I am a physicist by training and at one time worked at Textronix, a premier provider of test and measurement equipment.
Question:	Can DC current be measured by the clamp
Answer:	It not only measures DC current accurately via the clamp but it also indicates the direction of the current. Due to the disagreeing answers on this question, I went ahead and bought it. It works really well for DC current and is going to be be an excellent tool trying to troubleshoot a vehicle battery drain. Just remember that not all clamps measure DC current. Most cheaper meters do not but this one works great for it.

Product features

Tacklife CM06 Clamp Meter 6000 Counts Auto-Ranging

The tool CM06 of TACKLIFE is a clamp meter with an automatic measuring range of 6000. It is easy to use and innovative. The clamp meter with convenient use can safely measure AC/DC current, AC/DC voltage, resistor, diode, on-off and capacitor without stripping or disconnecting the circuit to avoid dangerous situations.

The clamp meter also has "SEL" function selection keys, "Hz/%" frequency/duty ratio selection keys, "ZERO" automatic zero-setting keys, "HOLD" data retention keys, and backlight/working light keys.

Specification:

• Environmental conditions: 600V CAT. III, pollution degree: II, altitude <2000m
• Working environment humidity: 0~40°C (<80% RH, not considered when <10°C).
• Storage environment temperature and humidity: -10 ~ 60 ° C (<70% RH, remove the battery).
• Temperature coefficient: 0.1X accuracy / °C (<18 ° C or > 28 ° C).
• Maximum allowable voltage: 600V DC or 600V AC rms.
• Sampling rate: about 3 times / sec.
• Display: 33/4-digit LCD display.
• Overrange indication: The LCD will show “OL”.
• Input polarity indication: “-” is automatically displayed.
• Dimensions: 218mm X 78mm X 32mm
• Weight: no more than 280g (with battery)
• Clamp head opening maximum size: 26mm

Resistance, Diode, On-off, Capacitance measure

When you measure resistance, diodes, switches, and capacitance, be sure to turn off the power to the circuit under test and discharge all capacitors.

AC or DC Voltage&Current Measure

Rotate the measuring function selection turntable to the voltage test gear, and select the AC or DC voltage measurement function by pressing the "SEL" key. The black pen line and the red pen line are connected to the COM input jack and the INPUT input jack respectively. The voltage of the circuit to be tested is measured at the other two ends of the pen. The operation is simple.

NCV Voltage Induction and Test Wire

When the voltage induction area of NCV is close to 90-1000V AC voltage or fire line, the instrument will emit sound of sound and light alarm signal "droplet". Make the measurement safer.

Ideal Gifts For Your family & Friends to do some DIY at Home

Product description

Electricity is essential part of life

Electricity is one of the most important blessings that science has given to mankind. It has also become a part of modern life and one cannot think of a world without it. Electricity has many uses in our day to day life. It is used for lighting rooms, working fans and domestic appliances like using electric stoves, A/C and more.

It’s all about precisely troubleshoot, then finding solution is the easy step.

The Weepro Digital Multimeter Vpro850L is a very versatile tester that can measure DC & AC voltage, DC current, resistance, DIODE, transistor hFE and continuity.

Measurement ranges includes:

1.DC Voltage: 200mV/2V/20V/200V +- 0.5%, 600V +- 0.8%

  2. AC Voltage: 200V/600V +- 1.2% 

3. DC Current: 200A/2mA/20mA +- 1%, 200mA +- 1.5%, 10A +- 3%

  4. Resistance: 200Ω/2KΩ/20KΩ/200KΩ/2MΩ +- 0.8%

Specification:

Max Display: LCD3 ½ digits (1999 count) 0.6”

High Polarity: Automatic, indicated minus, assumed plus.

Measure method: double integral A/D switch implement

Fuse Protection: F-200mA/250V. 

Sampling speed: 2 times per second

Over-load indication: “1” is displayed

Polarity Indication: "-" displayed for negative polarity. 

Operating Environment: 0°C~40°C, at <80% RH

Storage Environment: -10°C~50°C, at<85%RH

Power: 9V NEDA 1604 or 6F22

Low battery indication

Static electricity: about 4mA

Product Size: 135 x 67 x 33 mm

Product net weight: 145g (including battery)

Packaging Include:

- 1x Vpro850L Handheld Digital Multimeter 

- 1x Instruction Manual 

- 2x Test Leads (each lead's length: 80cm )

- 1x 9V Battery

• VERSATILE DIGITAL MULTIMETER: Suitable for all kinds of household use and industrial use. Can be use at Household Outlets, Fuses, Batteries (including Vehicles), Automotive Circuit Troubleshooting, Charging System, Testing electronics in Cars etc. It is a AC/DC Voltmeter, Ohm Volt Amp Tester, Electric Ohmmeter, Diode, Resistance and Audible Continuity Detector.
• Troubleshooting with Speed and accuracy: This Multimeter has a sampling speed of 2 times per second; Built-in a backlight LCD display with 3 ½ digits (1999 count) 0.6”, and high polarity including negative and positive readings.
• Electronic Tester Multimeter with Over-load Protection and Low-Power Reminder: Use the PTC protection circuit for Resistance, and frequency measurement. Over-load indication "1" will be displayed; Low battery indication will be displayed when battery power is low.
• Built in Audible Continuity Test Voltmeter and Data Hold : Buzzer will work if the resistance is lower than 30Ω±20Ω; Data Hold Function for clear reading; The Weepro digital multimeter comes with an insulated rubber case kickstand to help better grips and easier reading, and with the ABS material use at the same time provide users maximum safety.
• BUY WITH CONFIDENCE: All sales come with  90-day return refund guarantee, 10-year warranty and lifetime supported by WeePro; Battery / Two 80cm Test Leads / User Manual are Included

User questions & answers

Question:	Hi, Is there a protection plan options for this item? if yes, what's the cost of the plan. Thanks
Answer:	Why bother, the cost is low and there is a return policy.
Question:	is the a category 3 and true RMS meter
Answer:	NO
Question:	Is your meter made here in the usa,or is it out sourced from china
Answer:	Of course in China , as almost tech gadget, it would have costed at least 10 times more if made in USA, and not any better
Question:	Does this work with square waves like those for the output of a 12V landscape lighting transformer? If so, what setting should be used
Answer:	A square wave can be expressed as a sum of the fundamental frequency and many harmonics, the meter is designed to measure just the fundamental , 60 hz, if it can do a proper filtration of it, which is pretty difficult, so NO

Product features

WeePro Vpro850L Digital Multimeter

The multimeter is a basic assistant to test & troubleshoot a variety of automotive and household electrical problems safely and accurately. This WeePro Digital Multimeter Voltmeter Ohmmeter Ammeter meets your demands. Adopting durable material, it is tough enough to be used for a long time. Besides, it can be used in measuring remaining capacity of the rechargeable battery, so as to check whether the battery is fully-charged. Don't hesitate to bring it home now!

INTRODUCTION

• DISPLAY: 3½ digit LCD.
• FUNCTION & RANGE SWITCH

Our CMM adopt rotational switch which situated at the middle of the front case. It is used for the selection of FUNCTION and RANGE .

• POWER ON-OFF

In order to save energy, please turn the switch to "OFF" position when not in use.

PART 2

• "COM" jack -- Common jack.
• " VΩmA" jack -- Voltage, resistance, not more 200mA current, temperature and battery input test jack.
• "10ADC"jack -- For the input of more than 200mA current.

Specifications:

• 1. DC Voltage: 200mV-600V ±(0.5％±2dgts)
• 2. AC Voltage: 200/600V ±(1.2％±10dgts)
• 3. DC Current: 200uA-10A ±(1.0%+2dgts)
• 4. Resistance: 200Ω－2MΩ ±(0.8％±3dgts)
• 5. Power supply: 9V,6F22
• 6. Max. display: 1999
• 7. Diode: Yes; Dynatron: Yes; LCD Backlight: Yes; Continuity Buzzer: Yes; Low Battery Indication:Yes; Data Hold: Yes
• 8. Input Impedance for DCV: 1MΩ
• 9: Sample Rate: 3times/S
• 10: LCD Size: 70 x 40mm

DATA HOLD

The switch is used to hold the display reading when the instrument is disconnected from whatever was being measured.

BACKLIT LCD

Large digital display with backlit LCD for visibility in dimly light areas.When BACK LIGHT is turned on. It needs to be turned off by user manually. (This function was revised according to our lovely customers' suggestion, it is more practical and safer in fact. Thank you all.)

Large LCD Screen

70 x 40mm big lcd screen, word size up to 25mm.The best display visual angle is approx 70°

• 🎁 Gift for Men
• 🗜️【Multi-Purpose Clamp Meter With True RMS Auto-Range】Accurate AC/DC Voltage, AC/DC Current, Frequency, Continuity, Duty Cycle, Diode, Capacitance and Resistance Measurement.
• 🗜️【With NCV & Live Line Test Function】Non-contact Voltage Detection Function with a Sensor to Detect Voltage and Avoid Electric Shock without Touching Any Wires. Light and Sound Alarm If Detects the AC Voltage (90V-1000V) or Live Wire.
• 🗜️【Continuity Test & Overload Protection】Designed to Safely and Accurately Confirm the Circuit Conducts Electricity with Low Voltage Indication and Overload Protection. Light Alarm If Detects the AC Voltage (90V-1000V) or Live Wire. Shows "OL" on the LCD If Overload.
• 🗜️【Easy To Use And Read】Small and Portable to Carry and Use. High Resolution, Large Backlit LCD Screen Improves Visibility. The flashlight can Access Measurement in a Dark Place. Low Battery Display. Widely used in your life.
• 🗜️【You Will Get】Meterk MK06 Digital Clamp Meter 4000 counts, 2* Test Leads, 3* AAA Batteries, User Manual(English + French + German + Italian + Spanish) , 1* Storage Bag.

Product features

• 【100% Safety Assurance】Built-in Double Fuse. Overload Protection on all ranges.
• 【Auto-ranging Tester】Accurately measure AC/DC voltage, AC/DC current, resistance, frequency, continuity, diode, etc.
• 【Backlight Display】 Designed with 3 1/2 digit LCD display and 'Backlight', showing the reading clearly in low light areas.
• 【Special Points】 Data Hold, Maximum Value Hold, Function Switching, Auto Power OFF. Sampling Speed: 3 times per second.
• 【9V Battery】DON'T forget to install the 9V battery before using the digital multimeter, or it will go on strike.

User questions & answers

Question:	Is the unit truly auto-ranging? i see a "range" button on the unit pictured
Answer:	Yes
Question:	What batteries does it use
Answer:	9v battery. It does come with it. You will have to install.
Question:	For a hobbyist, why would I not buy a $20 multimeter vs something
Answer:	Fora hobbyist the really cheap meters are the best because sooner or later one will test something that will ruin the meter. This meter is really an intermediate meter which is above the hobbyist stage but still below the professional stage. An no, buying a Krug doesn't make you a professional.
Question:	Does continuity test produce a beep
Answer:	Yes. Turn dial to diode setting and press FUNC once. Beep is plenty loud. Great meter for the price.

Product features

Technical Specifications:

1.DC Voltage: *200mV/2V/20V/200V ±(0.5%+2) *600V ±(0.8%+2)

2.AC Voltage: *2V/20V/200V ±(0.9%+3) *600V ±(1.2%+3)

3.DC Current: *200μA/2000μA/20mA/200mA/10A ±(1.5%+3)

4.AC Current: *200μA/2000μA/20mA/200mA/10A ±(1.5%+4)

5.Resistance: *200Ω/2kΩ/20kΩ/200kΩ ±(0.8%+2) *2MΩ/20MΩ ±(1.0%+2)

6.Frequency: *20kHz ±(1.5%+5)

7.Power Supply: 9V Battery (6F22 or 1604A Type)

8.Safety Class: IEC 61010-1, CAT II 600V

AC/DC Voltage Test***

Battery Test***

Resistance Test***

Backlight LCD

3 1/2 digit LCD display provides clear display. And 'Backlight' can help show the reading clearly in dark areas and at night.

Data Hold

If you want to record the measurement value, just press the 'Hold' button, then the reading showed on the screen will be locked.

Full Support

Foldable stand for hand free use. ​Just open up the support stand, the multimeter can be propped up stably.

Overload Protection

Built-in Double fuse can protect the multimeter effectively. Overload Protection on all ranges.

• ACCURATELY MEASURES: AC/DC Voltage, DC Current (Not AC Current), Resistance, Continuity, Diodes and more.
• TROUBLESHOOTS SAFELY: Automotive and household electrical problems safely and accurately; Overload protection on all ranges
• EASE OF USE: Data hold and large digital display with backlit LCD for visibility in dimly light areas; Sampling speed: 2x per second
• 1 Year Warranty. Built-in kickstand for hands-free use. Protective rubber corner guards for drop protection
• NOTE: This meter can not test AC Current; Ensure your multimeter is set to the correct setting before testing

User questions & answers

Question:	which setting is for volts, and which is for ac
Answer:	The V with the two lines is DC volts and the line with the squiggly line is AC volts.
Question:	is the continuity test audible
Answer:	Good question. and I can't find an answer it doesn't say but in the picture when it's showing someone testing continuity it shows that it's beeping what it doesn't say that it does beat and we've got two people on here that say it does not and two people that say that it does so good luck I'm looking for one that is audible myself why all multimeters don't have an audible noise when you have continuity I will never know either that or you can have one that has a paper thin needle that jumps and you can't see it and you have to take your eyes off of what you're working on to see if you have continuity and when you move your head you lose contact and it's such a pain in the ass
Question:	Is this unit protected by a fuse? If so, is it replaceable? My last meter was fused but it was soldered. I couldn't easily replace it
Answer:	I had to replace the ammeter fuse (because I forgot to switch the hot (red) test lead from the left side to the middle, before testing my car's battery voltage). That fuse is 10A 600V. I looked around for those & couldn't find them, but found 10A 250V and these worked OK. They're 20 x 5 mm ( .2 x .79") ceramic fast-blow. https://www.amazon.com/gp/product/B07JFDTTMJ/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Question:	Can this handle being plugged into a wall socket? Also, can someone give a walkthrough of how to safely test a socket
Answer:	plug the red lead into the meter socket marked COM and the black into the center meter socket. Set the dial to V~ (for AC volts) on the 200 scale (for household current) insert one probe lead into each of the wall socket's vertical slots and move them around a bit inside the outlet slots to make sure you're getting a good connection, if in doubt plug a lamp or something into the socket. If you suspect the outlet socket itself has failed carefully remove the wall plate in order to access the actual wires connected to the outlet to be sure it's either a dead circuit or the outlet itself has failed.

Product features

AstroAI Digital Multimeter

The AstroAI AM33D Multimeter is designed to safely and accurately troubleshoot a variety of automotive and household electrical problems. It's easy and safe to operate and features many different functions for measuring current, voltage, and resistance, as well as continuity, transistor, and diode testing, which is both for automotive and household uses.

Troubleshoot Electrical Problems

AstroAI multimeter is professionally designed to troubleshoot electrical problems or just for electronics training.

Continuity Test

Connect the test leads to two points on the circuit being tested.

Intelligent Anti-burn and Dual Fuse

Double Fuse Protection, more secure and reliable; This multimeter is designed with safety in mind. Overload protection on all ranges.

Backlit LCD

Large digital display with backlit LCD for visibility in dimly light areas.

Data Hold

When taking measurements and recording results, it is often easier to use the data hold function to freeze the data being displayed on the digital display.

Low Battery Indication

You can quickly know to replace the battery and continue working. so you never accidentally run out of juice.

Open Support Stand and Protective Rubber

Built-in kickstand for hand free use. Protective rubber corner guards for drop protection.

• True-RMS clamp meter: This multimeter can accurately measure AC/DC Current, AC/DC Voltage, Frequency or Duty Cycle, Resistance, Capacitance and also provides Diode, Continuity and Temperature tests. True RMS for accurate measurements on non-linear loads. Easy to use for labs factories and household.
• LowZ & LPF: Low input impedance helps prevent false readings due to ghost voltage. Low Pass Filter (LPF) for accurate measurement of variable frequency drive signals when measuring motors and transformer. To measure the current you need to clamp the meter around one of the wires and not the whole power cord.
• NCV Detection Function: Non-contact voltage detection effectively check electrical status through measuring EM field intensity without touching any wires; The NCV button lies on the right side. Simply place your thumb on it and push.
• Multi-function: Two-color backlit LCD Display - When the voltage > 80V, the current > 3A, the LCD backlit screen turns red to warn you of high voltage/ LED Flashlight / Temperature Measurement for liquids and air conditioning ports included K-Type Thermocouple / Low Battery Indication / Auto power off after 15 minutes inactivity.
• Safety Service: Safety standard IEC 61010-1, CAT III 600V. Double insulation. 36 Months product service provided. 7/24 Customer Service.

User questions & answers

Question:	What are the concrete tips for automatic shutdown
Answer:	Step 1.) Run around in circles until u get too dizzy to continue or 15 min has passed, then it will auto shut off. 2.) There is no step two. If you have further questions or need more concrete tips, just continue repeating step 1 until it sinks in.
Question:	W/ backlite on I tilt the meter away from me the display is readable but once I tilt it towards myself the display becomes unreadable, is this normal
Answer:	Yes, with the baclklight on, it's viewable from straight-on to tilted away from yourself, but with the top tilted towards you it loses all contrast. Side-to-side viewing angle is a good. This is a common trait among some LCD displays.
Question:	I want to measure current flowing to my car starter when cranking engine. Does this clamp on meter measure DC current when using clamp
Answer:	Yes, It can read DC starting current with the clamp when set to DC measurement. Reading moves fast but I take video with mobile phone camera and rewind to see the 268A when starting a Nissan Frontier 2.5 L engine. Reasonable current though I cannot check its accuracy yet. I buy meter to monitor DC charging current and confirm non-running car leaking currents under 50mA but need to wait 20 minutes after engine off to let car computer stabilize from initial shutoff which can cab be as high as 0.6A. With this meter, I also find about 10mV leaking voltage on plastic surface between terminals at new battery (due to acid filling spill at manufacturing?) from club store which I need to reduce the Voltage drop to less than 0.1 mV by scribing several grooves on plastics surface around terminal posts. Calibrate to zero by holding Z/F button few seconds before measurement can help read accuracy. I am happy with this meter for the price. Hope you too if do not have time to find a better cheaper on
Question:	how accurate is th DC current measurment
Answer:	I have not checked it against a reference, but I have done some measurements on my car with this. It seemed to reflect a reasonable value when the battery charger was on, showing charging current. and It showed a big current for the started that was believable. When you first set it, you can press a zero button to zero it out. Then I looked at a really bad solar panel that could only put out about 50 milliamps when shorted, and it was able to show that pretty well. So the bottom line, if you are going to use this for debugging stuff, it seems pretty good. If you are going to measure calorie input to control a chemical reactions in a pharmaceutical lab, I can't say. For me, it is just cool that it can do a DC current in the first place. Has already come in handy as I was able to determine my alternator was not charging my battery quite easily.

Product features

To measure Direct Current

Specifications:

If current> 3A, the orange display lights up.

The measuring range of DC current is 60A/600A. Accuracy: ±(2.5%+5).

Note:

Before measuring the DC current, long-press and hold the Z/F key until the ZERO character appears to clear the data.

To measure Alternating Current

Specifications:

If current> 3A, the orange display lights up.

The measuring range of AC current is 60A/600A. Accuracy: ±(2.5%+5).

Note:

To measure the current you need to clamp the meter around one of the wires and not the whole power cord. The power cord contains two wires carrying current and ground wire. The current in two wires always flows in opposite directions, so the magnetic fields from two wires canceling each other, therefore the meter reads 0 A.

Grasp the individual current conductor to be measured and close the current clamp again. The measured conductor must be placed in the center of the clamp, otherwise, additional errors will occur.

Jaw Design

The Jaw is marked with maximum voltage and current measured value. Suitable for one-hand operation.

Weight & Size

Weight :260g. Size: 7.5 x 2.8 x1.3 inches.

Small and light, easy to carry when working.

Packing List

1 x Kaiweets Digital Clamp Meter 1 x Test Leads (Pair), 1 x Thermocouples(Pair), 2 x AAA batteries, 1 x User Manual, 1 x Carrying Bag

Z/F Button Measurement

Press the "Z/F" button to switch the respective secondary function between the different measurements such as between AC and DC.

Automatic Shutdown

No operation in 15 minutes, the clamp meter beeps 3 times. Without further operation, it beeps again and switches off automatically.

Multi-Function

Accurately measure resistance, capacitance, diode, continuity. Easy to use in laboratory factories and homes.

• Versatile Digital Multimeter: Auto Ranging for accurate measurement of AC/DC voltage to 600V, Current to 10A, Resistance to 20MΩ, Capacitance to 2mF, Frequency to 2MHz. Tests Live Wire, Continuity and Diodes.
• Thoughtful Design: Support Data Hold, Max, Auto Shut-off, low battery indicator and continuity buzzer. Includes Convenient features like LCD Backlit Screen, Silicone Protective Case and Built-in kickstand make it easy to use. One 9V battery is included in the package.
• Wide Application：This Multimeter is designed to troubleshoot a variety of automotive and household electrical problems safely and accurately. It’s a suitable tool if you want to do some household or commercial improvements whether DIYers or Hobbyists.
• Ensures SAFETY: Double ceramic fuse is anti-burn and protects from overloading. The multimeter has passed environmental pollution degree 2 and overvoltage category III 600V safety standards. The silicone cover is able to protect the multimeter from failing damage and prevent electric shocks
• Pocket Size: Convenient size and weight make this multimeter ideal for DIYers, engineers and inspectors. The portable tester can easily be stored in a pocket. In addition, your purchase from AstroAI is covered by a three years warranty, please feel free to contact us when you have any problems.

Product features

AstroAI 2000 Counts TRMS Digital Multimeter

The AstroAI 2000 Counts TRMS Multimeter the perfect instrument to test & troubleshoot a variety of commercial and household electrical problems safely and accurately. Measurement functions have been updated to match various needs. AC / DC voltage separate test-gear, new millivolt test gear, new livewire-test function, and they also make the measurement clearer and more convenient. Apart from the above, the device can also measure AC /DC current, diodes and circuit continuity.

Voltage Test

Accurately measures DC/VC voltage and DC/VC millivolt.

Continuity Test

Connect test leads to the circuit, if it’s connected a buzzer will sound and the value will be displayed on the LCD screen.

Detects live wires

Live wire testing with the red test lead. This unique function tests the presence of live wires. When it detects a live wire, the multimeter will reflect with the audio alarm.

Backlit LCD and Data Hold

Backlit LCD ensures clear measuring in a dimly lit area. Hold function locks data for easy reading. It's convenient for you to record the data.

Capacitance measurement

You can test the capacitance to 2mF and get quick and accurate results.

Max Function

Press "MAX" button to get max data

Auto power off

Auto power-off after 15 minutes of inactivity to save power

Double Fuse

Double fuse overload protection, do not measure voltage exceeding 600V

• WIDE RANGE of tests for Voltage, Current, Resistance, Continuity, Capacitance, Frequency; Tests Diodes Transistors, Temperature.
• PROFESSIONAL LEVEL features include Auto-Ranging capability, and True RMS for measuring both AC Current and Voltage
• EASE OF USE: Convenient features like Data Hold, Large LCD Backlit Screen, Auto Shut-off and Hanging Magnet, and Kickstand make taking and recording measurements easier than ever before
• IDEAL FOR COMMERCIAL settings where it can handle the demands of a long workday, from the durable exterior to the wide range of heavy-duty capabilities
• Built-in F400mA/600V and F10A/600V explosion-proof ceramic fuse tubes; Double Protection, more secure and reliable; The fuses can protect the multimeter effectively; Overload protection on all ranges. 3 Year Warranty provided by AstroAI. Note: Please take off the cap before using the test leads.

Product features

AstroAI 6000 Counts True RMS Digital Multimeter

The AstroAI True RMS Multimeter is designed to be safely and accurately used by professionals in a commercial setting or weekend DIYer's that need a little more power utility from their standard digital multimeter. It's easy and safe to operate with advanced features built for measuring seemingly everything. Run tests on diodes and transistors while being able to measure voltage, current, resistance, continuity, capacitance, and frequency, all on one device.

Troubleshoot Electrical Problems

AstroAI multimeter is professionally designed to troubleshoot electrical problems or just for electronics training.

Continuity Test

Connect the test leads to two points on the circuit being tested.

Intelligent Anti-burn and Double Protection

Built-in F400mA/600V and F10A/600V explosion-proof ceramic fuse tubes; Double Protection, more secure and reliable; The fuses can protect the multimeter effectively; Overload protection on all ranges.

Backlit LCD and Data Hold

Large digital display with backlit LCD for visibility in dimly light areas; It is often easier to use the data hold function to freeze the data being displayed on the digital display.

Multi-Function Socket

Use the multi-function socket to measure both Capacitors and Transistors.

Hanging Magnet and Kickstand

Hanging magnet and kickstand make taking and recording measurements easier than ever before.

Temperature Test

Carefully touch the end of the thermocouple to the object being measured; Wait for the temperature reading to settle, then record the result from the LCD display.

Product description

The INNOVA 3320 is a Auto-Ranging Multimeter designed to safely and accurately troubleshoot a variety of automotive and household electrical problems. It's auto-ranging scales eliminate the need to dial in the correct range when making electronic measurements. The 10 MegOhm input is safe for automotive and household uses (i.e., household outlets, fuses, wiring, general-purpose batteries, vehicle battery and charging system, automotive circuits and more). The color-coded LEDs allow you to quickly check household batteries (green = good, yellow = weak and red = replace). Includes attachable test leads, holders and stand for hands free use and features protective rubber corner guards for drop protection. The INNOVA 3320 has a single setting resistance function for AC and DC voltage.

• UL certified product designed to safely and accurately troubleshoot a variety of automotive and household electrical problems
• Auto-ranging scales eliminate the need to dial in the correct range when making electronic measurements
• Features large digital display and color coded LED's for battery quick check
• Single-setting resistance function for AC and DC voltage
• Protective rubber corner guards for drop protection

User questions & answers

Question:	I own an Innova 3300 that over estimates voltages, 9V PS reads 10.5, 12V reads 13.8, 3.7V battery reads 6.24 what can I be doing bad
Answer:	I would advise against it. This is only a CAT 2 rated meter. That means the internal safety features are not sufficient to handle the higher potential voltage and energy that could come about at a meter panel. http://www.ni.com/white-paper/5019/enYou really want a CAT 3 meter if you want to measure any live breaker panels.If you are going to test for bad circuit breakers that are disconnected from the live wiring then you could use this meter to check for continuity and the like. Do not use this meter on anything more powerful than a wall outlet. CAT 3 meters are available for not much more money.
Question:	What's the lowest ohm reading it is capable of
Answer:	Yes, the Innova is great for finding parasitic leaks in boats and cars. Turn everything off..... EVERYTHING and then disconnect the negative battery cable. Insert the meter in series with the neg bat terminal and the end of the cable. If there is a current leak it will show on the meter when it is set on the AMPS function. Becareful that you don't turn anything on when the meter is connected because the AMP mode is not fused. If a current reading shows on the meter start pulling fuses and disconnecting devices until the reading drops to zero therefore isolating the problem
Question:	Can I use this meter to test for bad circuit breakers at electrical panel or electrical outlets at home? I'm newbie; want learn how to use. Thank u
Answer:	I'm assuming you have tried moving the main test mode selection dial to some position other than 'off'. Do you have another 9V battery on hand you could use instead? It's possible the battery you received with the tester is bad. If another battery does not solve the issue, then it's possible you received a bad unit.
Question:	I am searching for current leak in a boat (12v battery). Will this dial down to low enough amps to diagnose? Thanks
Answer:	It will measure down to 0.01mV in both - AC and DC modes, thou manual says - 0.1mV.

Product features

Innova 3300

The Innova 3300 is an entry-level, hands-free Digital Multimeter designed to safely and accurately troubleshoot a variety of automotive and household electrical problems.

Innova 3320

The Innova 3320's Auto-Ranging feature eliminates the need to dial in a specific voltage range when performing home and auto troubleshooting. The Color LEDs allows for quick battery condition checks, while rugged rubber guards protect it against accidental drops.

Innova 3340

The Innova 3340 Auto-Ranging Multimeter features a temperature probe to retrieve and display temperatures in both Celsius and Fahrenheit, vehicle RPM (including coil on plug vehicles) readings with the included inductive pickup, automatic zero adjustments and reverse polarity protection. The 3340 is great for testing alternator diodes, duty cycle, solenoids, breaker points, wiring, switches, and more.

• 【Reliable Clamp Multimeter with True RMS】Accurate AC/DC voltage current, resistance, capacitance, frequency, temperature, diode, continuity test and non-contact AC voltage detection, the Clamp Meter is fully functional and easy to use for labs factories radio-technology and household.
• 【Auto-Ranging with NVC】The meter will automatically select the appropriate auto range; NCV detects the existence of AC voltage on conductors and cables in-wall, troubleshooting electrical problems in a safe and user-friendly way
• 【Clamp Measuring】Clamp jaw measures AC current up to 28mm without interrupting the circuit, which makes it much safer to use on mains cables and high current loads in vehicles
• 【Continuity Test & Overload Protection】 Designed to Safely and Accurately Confirm the Circuit Electricity with Low Voltage Indication and Overload Protection. Light Alarm If Detects the AC Voltage(90V-1000V) or Live Wire.
• 【Features】high resolution, large backlit LCD screen and clamp light to improve visibility in dark place. Low battery display and automatic power off after 15 minutes inactivity. A soft zippered pouch included keeps everything neatly together and organized; portable to carry and use. Widely used in your life.

User questions & answers

Question:	How big is it
Answer:	Result, compare with caliber doesn’t matched like caliber for I.D of part showing.5.20, this item doesn’t read exactly like caliber digital or calling vernier. After perches. After testing, so I don’t trust to run my part under measuring this item.sorry, do not spend your money if you do job under +- .020
Question:	Why do so many users have DC current issues
Answer:	The tip measures .229". (Measured from tip to arm)
Question:	I want to measure the air temperature for paranormal
Answer:	About 4 inches long
Question:	Clamp only works with ac? checking since the description specifically says ac and not ac/dc for clamp usage
Answer:	It's a mix. The electronic housing is plastic, the protractor angle adjustment is steel and the protractor legs are some type of pot metal (as best I can tell).

Product features

Up to 28mm clamp jaw

Continuity Test & Overload Protection to Safely and Accurately Confirm the Circuit Electricity with Low Voltage Indication and Overload Protection.

• 【2000 Counts 8233D PRO Pocket Digital Multimeter】 Wide Application: It Can Accurately Measure AC/DC Current Voltage, Resistance, Capacitance (4-2000uF), Frequency (1kHz-200kHz), Continuity
• 【Included 9 Volt Battery】The Compartment Lid at the Back is Secured by One Cross Head Screw, Not Difficult to Remove at All; Also, Included Pair Test leads and Pair Banana Plug to Alligator Clip Cable
• 【CE Rated Digital Mulimeter with Over Load Protection】 Designed to Safely and Accurately Troubleshoot a Variety of Automotive and Household Electrical
• 【Large Backlit LCD Display】 Auto Polarity Display, Easy to Read Large Backlit LCD Display, Back-light Makes a Real Difference in Low Light Areas
• 【Nice Protective Orange Shell with Stand Built】 The Case with Our Multimeter is Some Kind of Non Slip, Slightly Soft Plastic that Will Help with Drop Protection, The Stand Places the Device at a 45 Degree Angle and Makes the Screen Easy to See Hands Free

Product features

Overview:

The 8233D PRO multimeter using the word high 15mm LCD display with backlight, even in low light places can clearly read the display value. It's a high performance, high reliability, compact handheld 3 1/2 digit digital multimeter auto range. This Meter is designed to meet IEC 61010-1 & CAT II 600V over voltage category and double insulation. The meter with rubber case, can against the shock of a drop.

Package List:

1x NT8233D pro multimeter

1x Banana Plug to Alligator Clip Cable

1x Test Probe Lead

1 x 9V 6F22 Battery

1x User Manual

2000 Counts Pocket Digital Multimeter

Measurement: AC DC Voltage, Resistance, Continuity, Diode, Capacitance, Frequency, AC DC Current.

Over load protection, Safety Class: IEC 61010-1, CAT II 600V

Nice Protective Orange Rubber Case, against the shock of a drop.

Tips:

1. The automatic range digital multimeter has a large internal resistance (high input impedance), and there is induced voltage interference when open circuit. The AC DC gear will have a digital jump when it is turned on, but it will not affect the measurement.

2. When turning on the meter and move the dial to ohms, it reads of OL (default), it's normal. In this case, it means that Infinity of resistance.

Bulit-in Stand

The back stand can place the meter at 45 degree angle position and make you hands-free.

Product description

BONUS: Add B07WQ21YMY to cart and enter code DWU9IJAQ, recieve 10pcs test leads with alligator clips for only 5.38.

Main functions:

AutoRange/Analog Bar Display/True RMS/NCV/Data hold/Back light/LED lamp/Diode test/Triode test/Continuity/Over load protection/Low Battery Indication/Auto Power Off/Short-circuit protection.

NCV:

Place the multimeter close to the AC voltage source (no wire is required) and the multimeter will display the voltage and give a corresponding prompt.

HTN full-viewing angle screen, 180 degree viewing angle. Has two LED backlights, Display is brighter than other sellers'. When the measured voltage exceeds 80V or current exceeds 1A, the white backlight will turn orange as a danger warning.

Wide range of applications: car repair, industrial circuit inspection, home circuit check.

Specification:

• Safety Level/Certification: IEC-61010-1 CATⅢ 1000V, CAT IV 600V, double insulation
• Display: True RMS, 6000 counts, 3 5/6 digits
• Overload Display: Display OL
• DC Voltage: 600mV/6V/60V/600V±(0.5%+3), 1000V ±(0.5%+3)
• AC Voltage: 600mV/6V/60V/600V/750V±(0.8%+5)
• DC Current: 600μA/6000μA/60mA/600mA/10A±(1.2%+3)
• AC Current: 600μA/6000μA/60mA/600mA/10A±(1.5%+3)
• Resistance: 600Ω/6KΩ/60KΩ/600KΩ/±(1.0%+3),6MΩ/60MΩ ±(1.5%+3)
• Capacitance: 10nf/100nf/1000nf/10uf/100uf/1000uf±(4.0%+5), 10MF/100MF±(5.0%+5)
• Frequency/Duty:10Hz/100Hz/1000Hz/10kHz/100kHz/1000kHz ±(1.0%+3),10MHz/±(3.0%+3)

Package Content:

1 x HT118A Multimeter

1 x Test Leads

2 x AA Battery

1 x User Manual

1x Thermocouple

• WIDE APPLICATIONS - KAIWEETS digital multimeter features 6000 counts auto-ranging for accurate measurement of AC/DC voltage, AC/DC current(DC is the default), resistance, continuity, frequency, capacitance and diode, liquid temperature, wire on-off, Battery checking. This advanced tester can diagnose automotive, industrial and household electrical issue.
• EASY OPERATION - Switch the dial and the LED lights on the jacks will shine accordingly. To plug in the leads is a real ease. Large 2.9” LCD backlight display. Dual Display with bar graph. Flashlight on the back ensures easy use in dimly lit places. Stable Kickstand, pen slot on the back.
• MULTI-FUNCTION - Non-contact voltage testing and Live function with sound and light alarm. The Sceen changes to red while detecting live wire. Low battery prompt, Data retention, Max/Min data, Auto Power-Off, Auto-Ranging.
• SAFETY FIRST - IEC Rated CAT III 1000V, CAT IV 600V, CE, RoHS certified. Anti-Burn with double ceramic fuse and thermistor protection circuit. High Voltage Protection is active on all ranges. Double insulated unit. Silicone protective case prevents it from falling damage
• AFTERSALES--Combined with Amazon's excellent delivery service, we provide 36-Month after sale service, lifetime technical support. Please feel free to contact us if you have any concerns.

User questions & answers

Question:	Will we be able to add a bluetooth upgrade to our meters since it indicates an updated meter will have it and it also has the symbol
Answer:	Yes
Question:	How long is the warranty
Answer:	No not good driving gloves
Question:	Just wondering if you ship this item to Australia
Answer:	I used these gloves and my hands did not get wet.
Question:	where can i buy replacement fuses? I love this meter but blew the fuse
Answer:	You can make a fist and I've used them for general cold weather yard work, but the gloves take away fine motor skills. Gripping a hammer would likely not be a problem. Holding a nail might be slightly more difficult.

Product features

Kaiweets HT118A Digital Multimeter

An advanced multimeter designed to be used safely and accurately by electricians at work places or homeowner and DIYer who need more capabilities than the standard measuring tool.

* Light up the terminals: LED indication light as input terminal guidance

* CAT III 1000V, CAT 600V safety rating

* Double insulation, robust outer case

* Includes test leads, K-Type thermocouple, batteries and user manual

Sensitive Continuity Test

Loud buzzing sound

Resistance < 30Ω, green light

Resistance between 30Ω to 60Ω, red light

2.7 inch Display

Display turns to orange when voltage is over 80V.

Large, clear digits

bar graph

Low battery indicator

Non-contact Voltage Detection

Non contact design for more safety. Just place the probe near outlets, sockets, terminals etc. to test voltage presence.

Maximum Safety

Dual fuse

Dual PTC thermistor

Intelligient Anti-Burn

Overload protection on all ranges.