14 best shelf system for garage

Product description

The 5 shelf unit provides ventilated shelves along with rugged tubular construction that helps keep items dry, reduce odors and prevent mildew and is designed for heavy-duty usage. Additionally, Sterilite 25 quart or 50 quart shelf totes fit perfectly on these shelves to create the ultimate storage solution. The shelving unit can be assembled quickly, without the need for tools.

• Outside Dimensions: 75.13 x 36 x 18
• Includes 1 5-Shelf Unit
• Made in the USA
• Rugged tubular construction
• Designed for heavy-duty usage

User questions & answers

Question:	looking for kitchen appliance storage; easy to assemble; does this fit the bill
Answer:	Yes.ðŸ~Š Easy to assemble.
Question:	Can I store kitchen plates, breadmachine, glasses on it
Answer:	Yepper on storage but becareful of the glasses
Question:	I wanted to use these for totes. What is the max tote size
Answer:	According to my measurements the largest it will hold is about 14" high by 22" long by 14" wide. You should be able to get two on each shelf. I have varying sizes right now, but these dimensions are the largest I am using. The length for mine are 24" and they just stick out a little in front. They are extrenely sturdy so far.
Question:	Do the plastic shelves sag over time
Answer:	I have had one for over ten years. As an artist, I have put a lot of sketchbooks, big drawing pad and papers...easily over 200 pounds. They will sag and bow after a while if you put heavier stuff on the shelves.

Product features

Sterilit 5-Shelf Unit

~ Dimensions: 75 1/8" H x 36" W 18"D.

~ Flat Gray shelves & legs.

~ Pack of 1.

~ Rugged tubular construction & ventilated shelves.

~ Accommodates 25 Quart or 50 Quart Shelf Totes.

Product description

An Amazon Brand

• 5-shelf shelving unit for your kitchen, office, garage, and more
• Each shelf holds up to 350 pounds (evenly distributed); total max load weight is 1750 pounds
• Wire shelves adjustable in 1-inch increments; no tools required
• Durable steel construction with black-coated chrome finish; adjustable leveling feet
• Product Dimensions: 36 x 14 x 72 inches (LxWxH)

User questions & answers

Question:	Could you set this up as 2 shorter shelfs side by side
Answer:	You would need to check your rack to see in the poles unscrew in the middle. I get the impression there were different versions of these racks. If they do you need a set of 4 caps, 4 threaded inserts and 4 casters or levelers. Check your pole size too, likely either 1” or 3/4” depending on the version.
Question:	Can you order more shelves? I don't want to buy another unit, I just need more shelves to space them closer
Answer:	Whitmor sells the shelves separately for $12.50. You can call Whitmor, Inc at 888.944.8667 or go online. Whitmor links to Amazon.
Question:	where can i download the assembly instructions
Answer:	super simple assembly. take 2 peices of the black thingies. they should have a mark saying top or a dot or something. they are conical so you snap them together on the legs. start on the near bottom of a leg on a ring and slide the cap till it snaps in place. do all 4 on the same ring, 1 level at a time.so caps, snap, shelf. the 1st shelf is the trickiest but once the second shelf is in place it has better stability. if this is not helping, try youtube.
Question:	I'm very frustrated. the plastic shelf holders are not snapping and staying closed what am i doing wrong
Answer:	I've purchased several of these and just have one more thing to add from the other comments. First, from the other comments you can gather that the pieces do not snap together with each other - they snap to the vertical poles. That's an important point left out of the instructions. Second, where most are saying hold them together and slide them down the vertical pole until they snap, you can do that but they most likely will snap in the same location, giving you same size shelves. The shelves are adjustable, so if you want different heights for each shelf, find the groove on the pole that is closest to giving you the shelf size you want. Then you can, making sure the arrow of the 2 interlocking pieces point up, just lay both pieces close to the groove and then you can slide them up or down to find the closest place to that spot where they will snap. One more thing is you need to make sure you put the shelf over the 4 poles as level as you can. Even though the pieces snap onto the pole, they can be knocked off if the shelf hits them too hard on one side or the other if you try to place it on askew. Doesn't have to be perfectly level - I did it by myself - but somewhat hitting all 4 clips at the same time and coming down over them as close to the same time as you can. The lip of the shelf has to be down in order for the shelf to slide over top of the interlocking pieces on each pole - that's what holds them together. Will not work with the lip up. I am a 60ish female with no real mechanical abilities so the first one was the hardest because the instructions left out key points. Hope this helps (I have put together about 5 or 6 of them now in my garage).

Product features

Open Shelf Design

Combining a clean, contemporary look with a conveniently adjustable design, the shelving unit offers open-sided, reliable storage space.

Dynamic Use

A useful addition to any kitchen, storage space, or workshop, each shelf can hold up to 350 pounds (total capacity 1750 pounds, evenly distributed).

Height Adjustable Shelves

Fully adjustable, you can move each shelf up or down in 1 inch increments by clipping the black, plastic sleeves around the metal posts.

Additional Features

Featuring a strong steel wire construction, leveling foot caps, and easy no-tool assembly with all necessary components included.

Product description

Fast Track 16" Bracket With Clips, Works With Wood & Wire Shelves, Has Speed clips To Help Lock Wire Shelf In Place & Allow Quick Removal Of Wood Shelf When Repositioning Shelf, Satin Nickel Epoxy Powder Coated To Resist Chipping & Cracking.

This 16-inch bracket supports both wood and wire shelves, offering up to 350 pounds of storage capacity in conjunction with another bracket, uprights, and a shelf (sold separately). Each bracket has comes with Rubbermaid speed clips to help lock both a wire shelf in place and allow quick removal of a wood shelf when repositioning. A satin nickel epoxy powder coated resists chipping and cracking. --Brian D. Olson

What's in the Box

One bracket with clips

• Requires FastTrack uprights for installation (model 1784365 or 1784367)
• Durable, powder-coated steel construction resists rusting, chipping and cracking
• Ideal for storing large, heavy items, perfect for garage or workroom areas
• Includes speed clips to lock wire shelf in place and allow for quick removal of wooden shelf for repositioning
• Made with strong metal with a nickel finish
• 3 brackets hold up to 350 lbs. using 4 per shelf

User questions & answers

Question:	is this the horizontal piece or the vertical piece in the picture? Or both
Answer:	It is around 80 by 26 by 10 and very heavy.
Question:	Has anyone attached these directly to the wall without the horizontal rail
Answer:	Looks like they would start rusting after about a year . They are coated well but I would spray with another coat of enamel. If you would use them for outdoors .
Question:	How much weight can shelf hold
Answer:	No tools required. The pieces fit into one another. If anything at all perhaps a rubber mallet to make sure they're snug, but I'm a big guy and just used my palm to tap it in place.
Question:	Is this the actual shelf? Or the brackets? Can it be hooked up like the closetmaid free standing shelves
Answer:	I think the add on hooks from the Dewalt metal shelving have that same tear drop style like how your shelves attach and they sell them as a ladder hook and another one for lead chords etc. they are almost identical shelving units. Hope that helps

Product features

Optimal Organization

Practical way to build the garage storage you have always wanted.

Versatile Layout

Build an entire storage system, or just get a little more organized depending on your garage needs.

Customized Space

The rails and accessories give you many different ways to reconfigure your garage space.

Easy Installation

Install rails and accessories easily in minutes, by one person using common household tools.

FastTrack Rail

The system is based on a central rail that attaches to the studs in your garage, allowing you to build off and create as much storage as you need.

Endless Accessories

Countless accessories to accommodate every storage need within your customized garage to add to the rail system.

Sleek Finish

Strong but lightweight components that allow for a clean and shiny look.

Long Lasting

Years of maintenance-free durability with a long lasting finish that won't snag or rust with age.

Product description

Take your garage or workshop storage to the next level with the Dewalt 4-Foot Tall, 3 Shelf Steel Wire Deck Industrial Storage Rack. The three industrial metal wire grid decks can each support 1,500 lb. for a total 4,500 lb. capacity. That is a staggering two and a quarter tons of DEWALT tough storage power. This ultra-sturdy rack also sports premium features such as top caps and fiberglass-reinforced nylon feet to prevent sliding and floor damage. The industrial powder-coated finish on the steel uprights, support straps, and crossbeams will not fade or chip. Each of the three shelves features a total of five support straps to prevent twisting or spreading under heavy loads and four clips on each shelf to prevent warping. Safety features include locking pins to ensure that the crossbeams stay properly seated and a wall-mount anchor bracket to prevent accidental tipping. The shelves are adjustable in 2.35-inch increments so you can design a shelving unit customized to your needs. You can also easily join multiple racks together vertically or horizontally. Two uprights come with pre-installed horizontal and diagonal support beams for easy setup and assembly. Say goodbye to your plastic shelving and let DEWALT help you achieve the storage setup of your dreams with our ultra-strong, industrial storage solutions. DEWALT believes that a job well done starts with a tool well built. Whether it is a drill, work glove, or storage rack, we are committed to crafting products that exceed your expectations. When you purchase a DEWALT product, you can be confident that it will not only perform to the highest standards but also withstand the harshest job site. We are DEWALT, and we are guaranteed tough.

• MASSIVE CAPACITY - The 3 industrial metal wire decks can each support 1,500 lb. for a total 4,500 lb. capacity
• DURABLE - The industrial powder-coated steel uprights, support straps, and crossbeams won't fade or chip
• NYLON FOOT PADS - Resilient, fiberglass-reinforced nylon feet prevent damaged flooring
• SUPPORT STRAPS - Each shelf is braced by a total of 5 support straps to prevent twisting or spreading under heavy loads
• SAFETY FEATURES - Pins secure crossbeams in place and wall-mounting anchor bracket prevents rack tipping

User questions & answers

Question:	Is this heavy duty
Answer:	Product is very heavy duty. I was pleased with how the wire shelves were supported and assembled. Overall assembly was very easy and quick. I will buy another set in the very near future.
Question:	How wide is it
Answer:	It 48" high, 50" wide and 18" deep.
Question:	Uneven floor, does Dewalt sell self leveling attachments
Answer:	Don't know about any self-leveling attachments. I think my shelving came with a piece to attach it to a wall or stud...I didn't have a leveling problem though so I didn't attach the shelf to the walls of my shed
Question:	What tools do I need to assemble this
Answer:	Thank you for taking the time to reach out! The DeWALT DXST4500 4-Foot Tall, 3 Shelf Steel Wire Deck Industrial Storage Rack requires a 4 mm Hex Key (included) OR 4 mm Hex Bit (included), a Rubber Mallet (not included), and a Flat-Head Screwdriver (not included) to complete assembly. If you have any additional questions, please feel free to reach out to us here at DeWALT Shelving!

Product description

An Amazon Brand

• 3-shelf shelving unit for your kitchen, office, garage, and more
• Each shelf holds up to 250 pounds (evenly distributed); total max load weight is 750 pounds
• Wire shelves adjustable in 1-inch increments; no tools required
• Durable steel construction with black-coated chrome finish; adjustable leveling feet
• Product Dimensions: 23.2 x 13.4 x 30 inches (LxWxH)

User questions & answers

Question:	has anyone every used these shelves outside? will they hold up against rain, snow, and sun
Answer:	I am using mine outside as part of a gardening work area. The black coated ones do not trust and hold heavy ceramic pots full of dirt. If you are not securing to a wall, put heaviest stuff on the bottom to avoid tip over.
Question:	What is the height of the entire shelf e
Answer:	The 3 shelf unit is 30" high (less than 3'). I purchased the 4 shelf unit, which is 54" (4' 6" tall). These are very well made and very adjustable, to fit your needs. Good luck!
Question:	Can you buy an extra shelf to have a total of 4 shelfs
Answer:	I needed a 4- or 5-shelf system with the same overall dimensions of this 3-shelf system. I bought two 3-shelf systems and cannibalized 2 shelves and 8 clips from the 2nd set to make a 5-shelf system. I have one extra shelf with clips if you want it. Just pay shipping.
Question:	Can I buy 2 and stack them together
Answer:	You can stack two together (I think). You need a connector. Something like this: https://www.amazon.com/Gizhome-Diameter-Connectors-Shelving-Replacement/dp/B07JB5XD59/ -- HOWEVER, these come in different thicknesses. I'm seeing one at 1.0mm and one at 1.2mm, both saying "for 3/4 inch poles". I'm gonna order it and see if it works.

Product features

Open Shelf Design

Combining a clean, contemporary look with a conveniently adjustable design, the shelving unit offers open-sided, reliable storage space.

Dynamic Use

A useful addition to any kitchen, storage space, or workshop, each shelf can hold up to 250 pounds (total capacity 750 pounds, evenly distributed).

Height Adjustable Shelves

Fully adjustable, you can move each shelf up or down in 1 inch increments by clipping the black, plastic sleeves around the metal posts.

Additional Features

Featuring a strong steel wire construction, leveling foot caps, and easy no-tool assembly with all necessary components included.

• Easy one-person installation with all hardware included: Installation Template helps mount holes; Bubble Level helps get perfect horizontal location. (Assembly needed DIY project - Composition of four 1'x3' shelves per tier)
• More Sturdy and Stable: the buckle design with velcros prevents the brackets from falling or bending.
• Heavy gauge steel construction provides safety loading up to 400lbs total.
• High quality screws provided. All hardwares have gone through strict tests.
• Suitable for securing to either wall studs or solid concrete wall.(Does not fit for METAL studs)

User questions & answers

Question:	Is there 1 pack 2 x
Answer:	It’s a two pack.
Question:	How tall are the brackets? Trying to figure out how much room I need below the shelf for them
Answer:	The bracket is 6 1/2 inches tall at the max point below the shelves.
Question:	Do these work for any spacing of studs
Answer:	I am sure the load rating would suffer if you had some strange 30” stud spacing but you can space the brackets as needed
Question:	Just to make sure does this contain two 24"x72" shelves
Answer:	You are basically getting 4x 24"x36" shelves. Grates come in 1'x3' sections. Two grates are used for every two brackets.

Product features

Organize Your Garage Space Perfectly

The FLEXIMOUNTS Wall Shelf is made of heavy gauge cold rolled steel. The low-profile design fit with any decoriting, gives your home more storage space. It comes with all necessary harewares, and have gone through strict tests. Selectable size options available to purchase from Fleximounts: 1'x4'; 1'x6'; 2'x4'; 2'x6'.

• Easy one-person installation with all hardware included: Installation Template helps mount holes; Bubble Level helps get perfect horizontal loctation; You are always reminded of the installation directions.
• Patent design in struture (Tool free adjustment). Wall shelves are convenient to disassemble and assemble.
• Height adjustable to meet actual needs. Freely place the shelves onto the slots on the wall plates.
• Heavy gauge steel construction provides safety loading up to 150lbs per shelf. All parts have gone through strict tests
• Suitable for securing to either wall studs or solid concrete wall.

User questions & answers

Question:	Will these mount to plaster walls if studs are found and 2x4s are used
Answer:	5.5" wide and 40' long
Question:	what is the mounting plate width? will it mount flush on the edge of a 2x4 stud, shed wall on 16" centers
Answer:	We do not suggest that one bike be hung vertically on this rack.
Question:	What is the length of the mounting strips
Answer:	No, this bike rack is only able to hold two bikes due to the weight limit of 200 pounds.
Question:	Is the width of the mounting strip fixed? One user said 35" 3/8 - can than be opened up to 43" and still have the adjustable feature
Answer:	You are able to adjust where to hang the holders.

Product description

The Hopkins 90124 2x4basics ShelfLinks Custom Storage System offers an easy fix to custom shelving. All the hardware is included, just add the size lumber you want (lumber not included). Ideal for the garage, and shed, the Shelf Links Custom Storage is durable and sturdy giving you the ability to easily organize your items onto storage shelving.

Offering configurations and dimensions that other do-it-yourself shelving kits simply cannot match, the 2x4basics ShelfLinks system helps you create shelving units that suit your needs--you just add the lumber. Designed to fit anywhere and hold practically anything, ShelfLinks shelves can be modified or expanded as your storage requirements change.

Simple assembly with only a powered screwdriver and a saw. View larger.

2x4basics ShelfLinks At a Glance Creates a customized storage system Heavy-gauge structural resin construction Supports spans up to 8 feet and holds up to 1,000 pounds Easy assembly--requires only a powered screwdriver and saw Lifetime warranty

Easy-to-Assemble, Customizable Shelving System

ShelfLinks allow you to build strong, custom-sized shelves by just adding 2x4 lumber (not included). Construct a great-looking entertainment center on the cheap or quickly put up shelving in your dorm room or garage. Anywhere you need a custom shelving solution, ShelfLinks make it happen in a fast, affordable way and provide a great alternative to flimsy, one-size-only plastic and metal shelving units.

Featuring easy-to-follow assembly instructions, ShelfLinks are as simple to put together as building blocks. First, cut your 2x4s to the length you choose. Next, attach four 2x4s to the top of the ShelfLinks to make your storage surface(s). You then insert four more 2x4s through the patented apertures to make the legs of your shelf unit. Secure all with the included screws. It's that simple! The only tools required are a powered screwdriver and saw. And you won't have to worry about miters or angles--only straight, 90-degree cuts are required.

Strong, Durable Construction Holds up to 1,000 Pounds

ShelfLinks are built to last. They're constructed of heavy-gauge structural resin--once joined with 2x4s, each shelf can support spans up to 8.0 feet (2.4 meters) and can hold up to 1,000 pounds (400 kilograms). Finished shelf depth is 16 inches (40 centimeters)--plenty of room to safely house a host of items, from school books and DVD collections to tools and construction materials.

This kit is backed by a lifetime warranty.

What's in the Box

Six ShelfLinks, each measuring 5.0 x 3.0 x 15.5 inches (WxHxL); screws; assembly instructions; and warranty information.

Construct a great-looking entertainment center on the cheap. View larger.

Quickly put up shelving in your garage. View larger.

Store records and games in your basement or attic. View larger.

Get the most out of your closet space. View larger.

From the Manufacturer

ShelfLinks allow you to build strong, custom-sized shelves by just adding 2x4 lumber (not included). Construct a great-looking entertainment center on the cheap or quickly put up shelving in your dorm room or garage. Anywhere you need a custom shelving solution, ShelfLinks make it happen in a fast, affordable way and provide a great alternative to flimsy, one-size-only plastic and metal shelving units. Featuring easy-to-follow assembly instructions, ShelfLinks are as simple to put together as building blocks. First, cut your 2x4s to the length you choose. Next, attach four 2x4s to the top of the ShelfLinks to make your storage surface(s). You then insert four more 2x4s through the patented apertures to make the legs of your shelf unit. Secure all with the included screws. It's that simple! The only tools required are a powered screwdriver and saw. And you won't have to worry about miters or angles--only straight, 90-degree cuts are required.

• Lumber not included with each kit
• Customizable shelving, can be modified or expanded as storage requirements change
• 16" deep shelves made of heavy gauge structural resin
• All hardware is included, assemble with only a screwdriver
• Only straight 90 degree cuts, no miter or angle cuts necessary

User questions & answers

Question:	Isnt this the exact same thing as the firewood rack kit except this kit gives you six plastic pieces instead of two
Answer:	YES! Absolutely. Not sure why people are saying otherwise, but your question seems to be, can I use just one vertical piece and connect shelves on either side of it. 100% yes. I did exactly that in order to save room. Thus, I only used 4 vertical pieces to set up 3 full sets of shelves, as the shelves can connect on either or both sides of the vertical pieces. It's crazy that they don't sell the shelves on a stand-alone basis for a more affordable price....but I guess they realized the obvious--if someone needs three sets of shelves, they would only buy two complete packages plus a couple extra stand-alone shelves and (by connecting them end-to-end), they would end up with three full shelves for a much lower price. I'm going to guess this "profit optimization" results in a lot of waste, since many people who connect their shelf sets will end up with extra pieces they have to throw away. I have two extra end pieces my self and no easy way to use them.
Question:	how long are these brackets
Answer:	Yes, the hanger brackets are included.
Question:	How to the actual shelves get secured? I understand the vertical beams. I am asking how the horizontals get secured down
Answer:	I think the tallest would be the Heavy Duty Welded 36 in. W x 81 in. H x 24 in. D 20-Gauge Free Standing Steel Tall Garage Cabinet in Black
Question:	could i use this structure and modify it into a deck, or would it not hold enough weight
Answer:	I have not used the lock but i am very pleased with everything else with the cabinet.

Product features

Customizable Diy Storage, Organization And Outdoor Furniture

Our 2x4 Basics brackets have been designed to make garage organization and outdoor furniture projects as simple as possible. Only 90° cuts are required, no miters or angles, and projects can be built to any length up to eight feet. To simplify the process even more, only 2x4 lumber is needed for most projects.

Garage Organization

Outdoor Furniture

Outdoor Storage

• Avoid Water Damage by Storing Your Items off the Garage Floor. Protect your items and use garage ceiling space to store seasonal and unused items. 22'' to 40'' ceiling dropdown provides up to 105 cu. Ft. of storage. Dimensions: 96 in. L x 48 in. W x 22-40 in. H. （Accessory hooks and items pictured on the racks are not included.）
• Safe - Buy overhead racks with long ceiling brackets designed to be attached to 2 studs. Combined with 6 vertical posts, it is the optimal structure choice to ensure safety.
• Quality - Top quality screw selected and all hardwares have gone through strict tests. Heavy duty cold-rolled steel construction provides safely loading up to 600 lbs.
• Different - Integrated Grid Design - More stable and sturdy compared to others with separate frame and wire.
• DIY installation with step-by-step instruction. Installation template helps make plan. This overhead storage rack fits all ceiling joist spacing ≤ 24", if joist spacing > 24", only fits the ceiling spacing of 48".

User questions & answers

Question:	how do you lift it to the ceiling do you have a crank system
Answer:	I'm not especially strong but I lifted the rack onto a ladder and balanced it there with the help of another shelf, then I attached 4 rubber (heavy duty) bungee cords to each corner and hooked it to the ceiling mount. After those were all attached I could carefully keep tightening the cords by moving the hook further and further into the middle of the rack, lifting it up incrementally. Eventually you get to a point where you can 'hook' the rack onto the piece that comes down from the ceiling mount, so it's supported before you screw it in.
Question:	Do I have to install the rack perpendicular to the ceiling joists as in the video or can I install the rack parallel to the joists
Answer:	As long as the ceiling mounts are installed in a joist(s), then it will work. I installed my units in the corner of my garage, which required some creative mounting, as the studs where not conveniently lined up for a perfect installation. For one of the brackets, I ended up securing it to the wall rather ceiling as there was no stud along the ceiling next to one of the walls.
Question:	Is the ceiling anchor bracket 16 to 24 inches long so one can span perpendicular over two ceiling joists to properly secure the rack
Answer:	Janet,First off, my ceiling joist run front to back in my garage. My racks are mounted on the back wall with the 48" width going front to back and the 96" length side to side. The predrilled mounting holes are spaced 16" apart along the long side and 24" on the side. Therefore, they are ready as you receive them for for both. The vertical adjustable drop straps are mounted every 48" so it doesn't make any difference which spacing your ceiling joist is since every 48" they match up anyway. If you put the rack in a back corner of a garage you could mount it with the short side on the back wall and the long side along the side wall. In that case you would need to either have 24" spacing in your ceiling joist or buy 3 48" (you can buy them this length at a hardware store, Lowes or Home Depot) pieces of angle iron to span 16" joist then use any of the holes available to get the 24 and 48" spacing at the ceiling. Hope this helps.Richard
Question:	What is the weight limit
Answer:	The limit is 600lbs, says so in the description and in the manual. I have 2 of these and I have a good 400lbs on 1 and 200 on the other and they have held just fine. If it fell, it wasn't installed correctly.

Product features

Use the ceiling rack to organize your garage space perfectly.

• Avoid flood damage by storing your things off the garage floor and protect your treasured items.
• Overhead storage makes your garage look neat,and get away from insects and rodents.
• Height adjustable from 22"to 40" ceiling dropdown, so you can customize to your perfect height!

Top quality M8 screws provided.

• Top quality M8 screws provided. All hardware have gone through strict tests.

Tested with triple loading breaking strength.

• Heavy duty 13 Gauge cold-rolled steel construction provides safely loading up to 600lbs.
• The whole set is test with triple loading breaking strength.

More Flexible and secure.

Ceiling brackets are designed to be attached to 2 joists,more flexible and secure.

• LARGE GARAGE ORGANIZATION: This sports organizer combines 3 major parts: It offers 4 garage hooks for hanging, 3 bins with a different design for various sizes sports items and bat racks, hockey racks and even golf bags. Organize all your indoor & outdoor sports goods on one basket for truly space saving and providing easy access.
• MANY OCCASIONS: This sport utility storage organizer is ideal for a game room, garages, basement, playgroup, gym, and schools for any workplace. It is time to prevent the chaos of sports items and make it tidy and well-organized
• DURABLE steel CONSTRUCTION: Made of a durable coated steel frame with elastic straps, the sports gear organizer offers long-lasting strength and impressive performance.
• EASY TO ASSEMBLE: Simple structure makes it easy to install. With the help of instruction, you will enjoy easy installation of the whole unit. (ATTENTION: WE HAVE PUT THE SCREWS IN ADVANCE TO ENSURE ALL PARTS ARE IN THE CORRECT POSITION AND PREVENTING PARTS LOSS, AS WELL AS SPARE PARTS INCLUDED)
• DIMENSIONS: Overall product: 36.05" L x 16.54" W x 42.71" H, top shelf: 28.74" L x 9.45" W x 2.36" H, each storage bin:15.16" L x 16.54" W x 15.16" H, bat rack: 16.54" L x 5.51" W x 15.75" H.

User questions & answers

Question:	Is this unit partical enough to hold a lot
Answer:	YES! Highly recommended it, I have almost all my kid's sports stuff and my yoga mat,knee pad,stretch strap and more. Totally make my garage clean and neatly!!!
Question:	This rack looks great for the garage to keep my kid's sports equipment, but I want to know how many full-size basketballs it can store on each bottom
Answer:	Dear Customers, The dimensions of each bottom basket is 15.16" L x 16.54" W x 15.16" H, each basket can hold up to 6 full-size basketball, whloe rack can hold up 24 full-size for your reference. Best Regards Mythinglogic Customer Service Team
Question:	What is this sports equipment made of
Answer:	Dear Customers, This sports equipment is made of high-quality steel with powder coated finish. We hope this answer can help you, thank you. Best Regards Mythinglogic Customer Service Team
Question:	Can i use this sports equipment rack outdoors
Answer:	Dear Customer, Thank you for your interested in Mythinglogic's sports equipment rack. You can use it outside but we recommend returning inside when is rain or humidity. Hope this answer will help you. Best Regards, Mythinglogic Customer Service

Product features

Multifunctional Usage:

Details:

• SPECIFICATIONS:
• Brand: Mythinglogic
• Frame Material: Steel
• Finish: Powder coated.
• Dimensions: 36.05" L x 16.54" W x 42.71" H
• Assembly: Required
• (ATTENTION: WE HAVE PUT THE SCREWS IN ADVANCE TO ENSURE
• ALL PARTS ARE IN THE CORRECT POSITION AND PREVENTING PARTS LOSS,
• AS WELL AS SPARE PARTS INCLUDED)
• PACKAGE INCLUDED:
• 1 x Sports Equipment Rack
• 1 x Instruction Manual

GARAGE/BASEMENT

This garage organizers and storage is practical enough for a family home use, store all your sports gear, kid's toys, off-season clothes on one rack to free up floor space and provide easy access.

FITNESS

Store stability balls, exercise bands, medicine balls, resistance bands, exercise mats and more - enjoy more workout space and less floor clutter.

SCHOOL

4 storage bins are a perfect solution for keeping basketballs training equipments or other school supplies with various size in one place neat and organized.

Product description

The Hopkins 90164 2x4basics Workbench and Shelving Storage System offers an easy fix to custom shelving. All the hardware is included, just add the size lumber you want (lumber not included). Simple assembly with only a powered screwdriver and a saw, no miter or angle cuts necessary. Ideal for the garage and shed, the Shelf Links are durable and sturdy giving you the ability to easily organize your items onto storage shelving.

Create a work and storage space that truly fits your needs with the 2x4basics Workbench Assembly Kit. This innovative, do-it-yourself system lets you easily assemble a custom workbench in less than an hour. All you need is some plywood and 2x4s and you'll have a work bench that will meet all your project and storage requirements.

Use the included bonus ShelfLinks Kit to add shelving to the top or sides of your workbench. View larger.

2x4basics Workbench Assembly Kit At a Glance Helps you build a customized workbench with a height of 36 inches Assembles in less than one hour Each shelf holds up to 1,000 pounds (400 kilograms) Requires only straight, 90-degree cuts Lifetime warranty

Completely Customizable, Easy-to-Assemble Workbench System

This do-it-yourself system lets you create a bench that's the exact size you want--up to 8 by 4 feet--by just adding lumber (not included). Assembly is incredibly easy, thanks to the included, easy-to-follow instructions and cut lists. All you need is a powered screwdriver and a saw--no other tools are necessary. For added convenience, only straight, 90-degree cuts are required--no miters or angles--and all the hardware you'll need is included in the kit. When assembly is completed, the work surface height will measure approximately 36 inches (90 centimeters).

Advanced Engineering Meets Strong, Durable Construction

Sturdy 2x4 framing and advanced engineering make this kit stronger and more stable than most other workbench solutions. In fact, each shelf will hold up to 1,000 pounds (400 kilograms). An added bonus, the materials are made of heavy-gauge resins and are impact- and solvent-resistant for long-term durability.

Versatile Design for Potting Benches, Custom Shelving, and Storage Options

With the Workbench Assembly Kit, you are no longer limited to a standard-sized potting bench--you can make a unit as small as 2 feet by 2 feet to use as a plant stand.

In addition, you can use the included bonus 2x4basics ShelfLinks Kit to add shelving to the top or sides of your custom workbench (additional ShelfLinks kits sold separately). You can build custom workbench and storage solutions for your dorm room, garage, basement, shed, or home. Custom shelving will also add valuable storage space that fits your project requirements.

What's in the Box

Four workbench legs, six ShelfLinks, assembly instructions, hardware, and warranty information.

Customize a work bench for any jobsite. View larger.

Each shelf holds up to 1,000 pounds. View larger.

Solvent resistant for long-term durability. View larger.

Expand your shelving and storage with six included ShelfLinks. View larger.

From the Manufacturer

This do-it-yourself system lets you create a bench that's the exact size you want--up to 8 feet by 4 feet--by just adding lumber (lumber not included). Assembly is incredibly easy, thanks to the included, easy-to-follow instructions and cut lists. All you need is a powered screwdriver and a saw--no other tools are necessary. For added convenience, only straight, 90-degree cuts are required--no miters or angles--and all the hardware you'll need is included in the kit. When assembly is completed, the work surface height will measure approximately 36 inches (90 centimeters). Sturdy 2 by 4 framing and advanced engineering make this kit stronger and more stable than most other workbench solutions. Each shelf will hold up to 1,000 pounds (400 kilograms). An added bonus, the materials are made of heavy-gauge resins and are impact- and solvent-resistant for long-term durability.

• Lumber not included with each kit (Shelves not included)
• Includes 4 workbench legs, 6 shelf links
• Brackets made of heavy gauge structural resin. Workbench Legs to make a workbench in any length or width up to 8 feet by 4 feet (2.4m x 1.2m)
• Customizable workbench and shelving
• Only straight 90 degree cuts, no miter or angle cuts necessary

User questions & answers

Question:	I see in the instructions that they state to put a piece diagonally to support the work top. Was there a place in the leg to attach this piece
Answer:	Yes, the upper leg support accommodates the (3) pieces of wood . The left & right sides of the wood are screwed into the leg support and the diagonally placed 2 x 4 is just laid diagonally across (sits on the upper leg bracket).
Question:	Is there anyway to attach caster wheels to make this easier to move
Answer:	YES! In fact it is quite easy to do , "Adding Castors/Wheels", to this workbench. As sturdy as this bench is once built it is easy to flip on it's side or back. And in that position simply attach your wheels. Just make sure you purchase GOOD wheels! And with a good mounting system. I at first tried to save a buck and bought some really cheap wheels from Amazon. Thought the wheels were rated at 500Lbs. That must have been a one time use rating! I then found a deal on Amazon for "Locking, Two inch dia., Polypropylene wheels with metal frames", Rated for 1000 Lbs. and they worked great. "STAY away from any plastic wheels regardless of the ratings!" The catch is the mounting system for the wheels. Most either have four holes you can place screws into OR a single steel 'Round", post with a metal "O-ring" to lock it in place. The latter you can order a larger plate that will attach to the bottom of the bench that the post slides up into. These worked for me. The one's with the four screws? Even with longer screws than recommended, -"4 x #8, 3-1/2" inch long, metal deck screws" they failed repeatedly. The bench weighs allot by itself and the four screws literally tore though the bottom of the bench! The wheels with a 3/8" inch metal center post worked with the mounting plates I made from heavy steel angle, "L-Brackets from the hardware store", with the 3/8" inch hole that I drilled in them for the post. With four 1" screws into the bottom but also two into the side. So that they were held both vertically and horizontally. Good luck!
Question:	Are the shelf supports included with this kit the same size as the 90124 Shelf Link units ( which accept 4- 2x4 in width) sold separately? From the pictures it looks like the ones with this bench kit are using 3 - 2x4, or one narrower
Answer:	I ordered the bench kit (90164) and the shelf link kit (90124). I did not use the shelf kit supplied with the bench kit on the bench itself. I combined them with the shelf link kit to make more shelves. They are exactly the same parts. I hope this helps.
Question:	Can someone give me a general estimated idea of the cost to assemble this assuming a table top size of around 5'x2' or
Answer:	I used sanded 3/4” sheets of plywood with a double layer on top plus all the 2x4’s and upgraded hardware. I spent an additional $450 to build mine.

Product features

Customizable Diy Storage, Organization And Outdoor Furniture

Our 2x4 Basics brackets have been designed to make garage organization and outdoor furniture projects as simple as possible. Only 90° cuts are required, no miters or angles, and projects can be built to any length up to eight feet. To simplify the process even more, only 2x4 lumber is needed for most projects.

Garage Organization

Outdoor Furniture

Outdoor Storage

Product description

The Magnavox 3 Piece CD Shelf System Digital PLL FM Stereo Radio With Bluetooth And Blue Color Lights is an ideal addition to any small room or area. Offers Bluetooth connectivity, this makes it easy to listen to your favorite CDs while still having wireless connectivity via smart phones or tablets. With all of its connectivity features this system is a great addition to any small room or area. The system also has AM/FM radio to keep your local stations available. The built in USA port allows for audio playback. You can connect to any audio device via a 3.5 mm auxiliary in port.

• Tray loading CD player
• Total 30 watt RMS
• Programmable CD player
• Connect to your smartphone, tablet, or other audio device via Bluetooth
• Clock and LED display

User questions & answers

Question:	is their a strap or something i can purchase to hold the speakers and unit together
Answer:	I've gotta believe Amazon has rubber straps for your quest. The unit is approximately 22" wide.
Question:	Why computer speakers instead of stereo speakers? What is the difference
Answer:	Hi Vicki! Only logical answers are computer speakers generates clearer sound than stereo speakers! As technology continues its blazing pace older electronic parts will become extinct! I believe that is to our benefits Vicki!
Question:	Does this comes with a remote
Answer:	Remote is small and very usable! Be careful! Do not lose it!!
Question:	Can you play media from a thumbstick
Answer:	sure works great, copy the .wma to a flash drive, insert into usb slot and change the mode to usb.

Product description

LG CM4590 XBOOM 700 Watt Total Power Hi-Fi Shelf System. USB to USB recording. FM tuner and CD player.

• Bluetooth connectivity
• FM radio tuner
• USB to USB recording
• 700 watts total power
• Cd player

User questions & answers

Question:	Does it work with receivers
Answer:	The LG XBOOM 700W 2.1ch Mini Shelf System with Subwoofer and Bluetooth®, Model # CM4590 is its own self-contained unit that has its own built-in receiver. It does not have any audio outputs that you can use to connect it to a receiver's inputs to play through a receiver...^IFV
Question:	Dimensions are listed as 29 x 11.8 x 1.4 inches, which can't be right. What are the true dimensions of main unit & 3 speakers
Answer:	The W x H x D dimensions of the main unit for the LG XBOOM 700W 2.1ch Mini Shelf System with Subwoofer and Bluetooth®, Model # CM4590 are 8.1" x 12.4" x 11.2", those for the Front Speakers are 10.5" x 12.0" x 10.4" and those for the Subwoofer are 10.5" x 12.0" x 9.1"...^IFV
Question:	I assume there are no covers for the speakers/sub. It comes as shown
Answer:	That is correct. There is no cover for the speakers and the Subwoofer. The LG XBOOM 700W 2.1ch Mini Shelf System with Subwoofer and Bluetooth®, Model # CM4590 is shipped in its shipping carton and the speakers and Subwoofer come with a thin styrofoam sheet to protect them from scratches...^IFV
Question:	does it have a connection for remote speakers
Answer:	The only speaker connections available on the LG XBOOM 700W 2.1ch Mini Shelf System with Subwoofer and Bluetooth®, Model # CM4590 are for the speakers that come with the unit. It does not have connectors for additional speakers...^IFV

Product features

LG CM4590 XBOOM XBOOM Bluetooth Audio System

Searching for powerful sound? Look no further than this LG audio system which pumps out a commanding 700 watts of audio, more than enough to fill your room with booming tunes.

Still enjoy playing compact discs? This LG mini shelf system features a CD player so you can spin your favorites as well as the discs your friends bring over.

Auto DJ

Auto DJ virtually eliminates the gaps between songs, so the party never has to stop for you and your guests. People will think you hired a DJ for the night!

Bluetooth

Wirelessly stream music directly from your Smartphone or other compatible device for a seamless listening experience.

Disclaimer: Interoperability and compatibility among Bluetooth devices may vary.

Dual USB

Two USB inputs allow you to connect multiple USB-enabled devices at the same time, for greater convenience. You can also transfer files from one USB drive to another.

Sound Sync Wireless

No wired connection needed! Simply link your LG audio product with your compatible LG HDTV wirelessly via Bluetooth, reducing the cable clutter behind/beneath your television.

Product description

The DEWALT DWST08260 Tough System workshop racking system is a Modular self-assembly solution that is compatible with all Tough System modules, allowing to store and pull out products quickly and easily. The workshop racking solution can be fully Customizable for an array of arrangement options and allow to add a self-made shelf on top of brackets for additional storing. Stacking side latches allow attaching additional organizers or other Tough System modules. Each racking system can carry up to 440 lbs. Includes: 2) 6ft metal bars, 2) horizontal beams, 5 pairs of brackets (for toolbox and/or shelf).

• Compatible with all Tough System modules
• Customized organization with an array of arrangement options
• Robust racking solution can load up to 440 lbs
• Brackets support shelf add-on option
• Stacking side latches allow attaching additional Organizers or other Tough System modules

User questions & answers

Question:	Will dewalts tstak fit and lock onto of bottom with this system
Answer:	NO. The ToughSystem and TSTAK lines are different sizes and do NOT fit or stack together.
Question:	are these stackable with the tstack cases interchangeably
Answer:	NO. They are NOT interchangeable! The ToughSystem boxes have different lengths and widths from their TSTAK cousins. And the bottoms are molded differently.I have them both. They do not fit together to create an interlocking stable stack.
Question:	What improvements have been made over the old tough system drawers
Answer:	The overall construction of the drawers and drawer boxes are considerably better. The boxes are a little taller and don't fit where I had the old ones on my van shelves. I am much happier with the new style.
Question:	What are the interior dimensions of the box? I have a tool that is 19"x12" x8" and I was wondering if it would fit
Answer:	Well, they look bigger on the outside, OK. bottom interior measurement 10Wx18Lx11H......this box has a tray 2 3/4 inches deep that sits on bearing reinforced struts....but empty the lid is 1 inch clear to the lowest point of the lid reinforcements at the hinge point of attachment...so 10 inches deep to the top of the box, add 1 inch more to the lowest point of the lid. Tragic is this for you, because your tool as described will not fit. Great boxes for what they are, yet I think the pricing could be more competitive. The concept works good for me and I would recommend this to a friend with deep pockets. :)