13 best storage rack for garage

• Avoid Water Damage by Storing Your Items off the Garage Floor. Protect your items and use garage ceiling space to store seasonal and unused items. 22'' to 40'' ceiling dropdown provides up to 105 cu. Ft. of storage. Dimensions: 96 in. L x 48 in. W x 22-40 in. H. （Accessory hooks and items pictured on the racks are not included.）
• Safe - Buy overhead racks with long ceiling brackets designed to be attached to 2 studs. Combined with 6 vertical posts, it is the optimal structure choice to ensure safety.
• Quality - Top quality screw selected and all hardwares have gone through strict tests. Heavy duty cold-rolled steel construction provides safely loading up to 600 lbs.
• Different - Integrated Grid Design - More stable and sturdy compared to others with separate frame and wire.
• DIY installation with step-by-step instruction. Installation template helps make plan. This overhead storage rack fits all ceiling joist spacing ≤ 24", if joist spacing > 24", only fits the ceiling spacing of 48".

User questions & answers

Question:	how do you lift it to the ceiling do you have a crank system
Answer:	I'm not especially strong but I lifted the rack onto a ladder and balanced it there with the help of another shelf, then I attached 4 rubber (heavy duty) bungee cords to each corner and hooked it to the ceiling mount. After those were all attached I could carefully keep tightening the cords by moving the hook further and further into the middle of the rack, lifting it up incrementally. Eventually you get to a point where you can 'hook' the rack onto the piece that comes down from the ceiling mount, so it's supported before you screw it in.
Question:	Do I have to install the rack perpendicular to the ceiling joists as in the video or can I install the rack parallel to the joists
Answer:	As long as the ceiling mounts are installed in a joist(s), then it will work. I installed my units in the corner of my garage, which required some creative mounting, as the studs where not conveniently lined up for a perfect installation. For one of the brackets, I ended up securing it to the wall rather ceiling as there was no stud along the ceiling next to one of the walls.
Question:	Is the ceiling anchor bracket 16 to 24 inches long so one can span perpendicular over two ceiling joists to properly secure the rack
Answer:	Janet,First off, my ceiling joist run front to back in my garage. My racks are mounted on the back wall with the 48" width going front to back and the 96" length side to side. The predrilled mounting holes are spaced 16" apart along the long side and 24" on the side. Therefore, they are ready as you receive them for for both. The vertical adjustable drop straps are mounted every 48" so it doesn't make any difference which spacing your ceiling joist is since every 48" they match up anyway. If you put the rack in a back corner of a garage you could mount it with the short side on the back wall and the long side along the side wall. In that case you would need to either have 24" spacing in your ceiling joist or buy 3 48" (you can buy them this length at a hardware store, Lowes or Home Depot) pieces of angle iron to span 16" joist then use any of the holes available to get the 24 and 48" spacing at the ceiling. Hope this helps.Richard
Question:	What is the weight limit
Answer:	The limit is 600lbs, says so in the description and in the manual. I have 2 of these and I have a good 400lbs on 1 and 200 on the other and they have held just fine. If it fell, it wasn't installed correctly.

Product features

Use the ceiling rack to organize your garage space perfectly.

• Avoid flood damage by storing your things off the garage floor and protect your treasured items.
• Overhead storage makes your garage look neat,and get away from insects and rodents.
• Height adjustable from 22"to 40" ceiling dropdown, so you can customize to your perfect height!

Top quality M8 screws provided.

• Top quality M8 screws provided. All hardware have gone through strict tests.

Tested with triple loading breaking strength.

• Heavy duty 13 Gauge cold-rolled steel construction provides safely loading up to 600lbs.
• The whole set is test with triple loading breaking strength.

More Flexible and secure.

Ceiling brackets are designed to be attached to 2 joists,more flexible and secure.

Product description

An Amazon Brand

• 5-shelf shelving unit for your kitchen, office, garage, and more
• Each shelf holds up to 350 pounds (evenly distributed); total max load weight is 1750 pounds
• Wire shelves adjustable in 1-inch increments; no tools required
• Durable steel construction with black-coated chrome finish; adjustable leveling feet
• Product Dimensions: 36 x 14 x 72 inches (LxWxH)

User questions & answers

Question:	Could you set this up as 2 shorter shelfs side by side
Answer:	You would need to check your rack to see in the poles unscrew in the middle. I get the impression there were different versions of these racks. If they do you need a set of 4 caps, 4 threaded inserts and 4 casters or levelers. Check your pole size too, likely either 1” or 3/4” depending on the version.
Question:	Can you order more shelves? I don't want to buy another unit, I just need more shelves to space them closer
Answer:	Whitmor sells the shelves separately for $12.50. You can call Whitmor, Inc at 888.944.8667 or go online. Whitmor links to Amazon.
Question:	where can i download the assembly instructions
Answer:	super simple assembly. take 2 peices of the black thingies. they should have a mark saying top or a dot or something. they are conical so you snap them together on the legs. start on the near bottom of a leg on a ring and slide the cap till it snaps in place. do all 4 on the same ring, 1 level at a time.so caps, snap, shelf. the 1st shelf is the trickiest but once the second shelf is in place it has better stability. if this is not helping, try youtube.
Question:	I'm very frustrated. the plastic shelf holders are not snapping and staying closed what am i doing wrong
Answer:	I've purchased several of these and just have one more thing to add from the other comments. First, from the other comments you can gather that the pieces do not snap together with each other - they snap to the vertical poles. That's an important point left out of the instructions. Second, where most are saying hold them together and slide them down the vertical pole until they snap, you can do that but they most likely will snap in the same location, giving you same size shelves. The shelves are adjustable, so if you want different heights for each shelf, find the groove on the pole that is closest to giving you the shelf size you want. Then you can, making sure the arrow of the 2 interlocking pieces point up, just lay both pieces close to the groove and then you can slide them up or down to find the closest place to that spot where they will snap. One more thing is you need to make sure you put the shelf over the 4 poles as level as you can. Even though the pieces snap onto the pole, they can be knocked off if the shelf hits them too hard on one side or the other if you try to place it on askew. Doesn't have to be perfectly level - I did it by myself - but somewhat hitting all 4 clips at the same time and coming down over them as close to the same time as you can. The lip of the shelf has to be down in order for the shelf to slide over top of the interlocking pieces on each pole - that's what holds them together. Will not work with the lip up. I am a 60ish female with no real mechanical abilities so the first one was the hardest because the instructions left out key points. Hope this helps (I have put together about 5 or 6 of them now in my garage).

Product features

Open Shelf Design

Combining a clean, contemporary look with a conveniently adjustable design, the shelving unit offers open-sided, reliable storage space.

Dynamic Use

A useful addition to any kitchen, storage space, or workshop, each shelf can hold up to 350 pounds (total capacity 1750 pounds, evenly distributed).

Height Adjustable Shelves

Fully adjustable, you can move each shelf up or down in 1 inch increments by clipping the black, plastic sleeves around the metal posts.

Additional Features

Featuring a strong steel wire construction, leveling foot caps, and easy no-tool assembly with all necessary components included.

Product description

An Amazon Brand

• 4-shelf shelving unit for your kitchen, office, garage, and more
• Each shelf holds up to 350 pounds (evenly distributed); total max load weight is 1400 pounds
• Wire shelves adjustable in 1-inch increments; no tools required
• Durable steel construction with black-coated chrome finish; adjustable leveling feet
• Product Dimensions: 36 x 14 x 54 inches (LxWxH)

User questions & answers

Question:	Is it hard to put together or take apart
Answer:	Very easy to do both. All you need to take it apart would be to pull off the shelves one by one. I would suggest upside down after removing the top shelf. Then hit lightly with a hammer or mallet from below each shelf to loosen it from the plastic two parts that hold each side of the shelves. Once they are loose they will come apart. When putting it together, the number one thing is to pay attention to the plastic parts because they all say, this side up. You put the side down, you will never get it together. FYI when you unpack the parts a bunch of round black plastic pieces (that look like junk) will fall of, those are ONLY for protecting the posts when shipping so when putting together make sure they are not inside the posts or you will not be able to put it together. The actual parts come in a large bag full of smaller bags, each one is for putting together one shelf. The instructions mention it, but some people are commenting that they are broken pieces because they can't read. lol I'm 70 and I have put together 9, my most recent today. I'm sure you can also. They are sturdy and my older ones have been in use for a decade.
Question:	Does anyone know if there are additional shelves available for purchase
Answer:	Not exactly shure but I did find this: https://www.amazon.com/Honey-Can-Do-SHF350B1436-Shelving-Capacity-14Lx36W/dp/B006Y7A5F8/ref=sr_1_5?crid=346E3HC6296E1&keywords=36x14+wire+shelving&qid=1581975130&s=home-garden&sprefix=36x14%2Cgarden%2C202&sr=1-5 If you need more than one shelf, it's cheaper to buy a whole other unit, use what you need and just ditch the rest or make another tall item storage rack out to it. No need to use the uprights tho if not needed. This racks are kind of addictive...
Question:	Is it possible to turn the shelves around so that the edges of the shelves have a lip
Answer:	People are saying yes, but it is designed for the shelves to have a "top" and a "bottom" so no, you cannot turn the shelves upside down. The weight of the shelve pushes down on the taper, creating a tighter "bind" with the leg. That's the design.
Question:	What is the diameter of the posts
Answer:	I don't know what diameter the other sizes are, but the 30" three tier shelf is only 3/4" diameter. I went off the previous answer when I bought three of these. Boy was I fooled when I received 3/4" poles. Smh!

Product features

Open Shelf Design

Combining a clean, contemporary look with a conveniently adjustable design, the shelving unit offers open-sided, reliable storage space.

Dynamic Use

A useful addition to any kitchen, storage space, or workshop, each shelf can hold up to 350 pounds (total capacity 1400 pounds, evenly distributed).

Height Adjustable Shelves

Fully adjustable, you can move each shelf up or down in 1 inch increments by clipping the black, plastic sleeves around the metal posts.

Additional Features

Featuring a strong steel wire construction, leveling foot caps, and easy no-tool assembly with all necessary components included.

• HEAVY DUTY STEEL: built from steel to hold up to 200 lbs of gear!
• INCLUDES 6 STORAGE ATTACHMENTS: 4 large attachments (11" long, 2" wide) and 2 small attachments (5" long, 2.5" wide)
• CUSTOMIZE TOOL STORAGE: insert attachments to 46" long wall track in custom setup to fit the gear and tools you have in your home, garage, shop, or store
• WHAT GEAR & TOOLS WILL IT HOLD? Rakes, shovels, ladders, hammers, backpacks, skateboards, helmets, and more
• EXCLUSIVE PATENT PENDING DESIGN: built to hold everything in your garage, and built to last!

User questions & answers

Question:	Where is it manufactured
Answer:	Not sure where it was manufactured.
Question:	Why is it so expensive for what it is
Answer:	Unfortunately I do not know, was worth the money
Question:	can i hang pruning loppers on this rack
Answer:	Yes. As my husband says, "you can hang just about anything on it, as long as you have it securely attached to the wall." He loves this tool storage rack.
Question:	Why is it so expensive for what it is
Answer:	Compared to many similar products this is a very heavy duty and it is the strong materials that you are paying for. If you just want to hang a couple of light weight brooms there are cheaper options. If you are like me and are gonna hang weed eaters, multiple shovels, and other heavy yard tools this is worth every penny.

Product features

Fully-Adjustable Wall Track

Customizable wall track system includes (45) mounting points to adjust each row of storage. Independent mounting brackets can be aligned with your wall studs for quick, easy installation and maximum strength, up to 200 lbs!

Heavy-Duty Storage Attachments

Solid metal Tool Storage Attachments hold a variety of tools including garden tools, shovels, rakes, power tools, line trimmers, brooms, mops, extension cords, hoses, bags, ladders, and even wheelbarrows!

Quick-Lock Pins for Easy Adjustments

Each Storage Attachment is locked into place with a gated pin for a rock-solid setup while loading and unloading your tools. This system also makes it quick and easy to adjust the spacing between each row of tool storage.

Space-Efficient Vertical Storage

The Omni System allows you to organize your tools up on the wall and out of the way. Clear up floor space in your garage or shop and keep all your tools neatly organized for your next project!

About StoreYourBoard

• The most trusted name in the industry for organizing your outdoor adventure gear!
• Headquartered in Charlottesville, VA
• Since 2009, we have designed and developed innovative storage solutions for your tools, bikes, skis, snowboards, surfboards, skateboards, longboards, paddleboards, kayaks, wakeboards, canoes, fishing rods, golf gear, and more!
• Our mission is to optimize your storage space while protecting your gear from excess wear and tear. From our first Scorpion Wall Rack designed in our founder's basement, we have now grown to become the most trusted name for outdoor adventurers around the world!
• Free up space in your home, garage, or retail shop and have your gear ready to go for your next trip!

• HEAVY-DUTY STEEL: Holds up to 200 lbs of garden tools, shovels rakes, brooms, mops, extension cords, hoses, power tools, and more!
• MAXIMUM STORAGE: rows of storage, 9.5" deep, each holds up to 50 lbs of tools
• POWDER-COATED FINISH: Durable black coating protects your tools and extends
• EASY INSTALLATION: Mounting hardware included. No assembly required.
• Exclusive Patent Pending Design: Built to hold your tools and built to last!

User questions & answers

Question:	Can this be fastened to the outside brick fireplace
Answer:	Hello! Thank you for your interest in our product! We do NOT recommend mounting our BLAT Tool rack to brick or any hardened surface because our included hardware may not be able to handle being bolted into brick. The rack can be mounted to the brick, but we suggest you buy mounting hardware that is designed to go into hardened surfaces. Hope that is helpful!
Question:	Can this be hung outside , since I don’t have a garage
Answer:	Yes, it’s very heavy duty, but it’ll probably rust eventually.
Question:	How long is this piece that will be mounted on the wall
Answer:	It is 3 feet long and a SOLID piece. I am going to order another one.
Question:	What country are they manufactured
Answer:	This tool storage rack is designed in the USA, manufactured in Vietnam.

Product features

Built Like A Tank"

Made from solid steel, this heavy-duty rack is built to hold all your tools and built to last. Each row holds up to 50 lbs of tools, rows, up to 200 lbs total! Durable powder-coating helps prevent scratches and last for a lifetime.

Maximum Capacity

Rows of storage feature 2" wide storage slots to hold common long-handle tools and equipment. Each row is 9.5" deep to fit multiple tools per row. Angled tips help keep tools securely hanging on the rack.

Universal Tool Storage

Neatly organizes your garage, home, or workshop by clearing up floor space and hanging your tools on the wall. Great for shovels, rakes, brooms, extension cords, hoses, line trimmers, and more!

Simple, Easy Installation

Mounting hardware included: Lag screws and washers. Mounting holes spaced 16" apart to fit standard wall studs. Simply secure using a drill or socket wrench.

About StoreYourBoard

• The most trusted name in the industry for organizing your outdoor adventure gear!
• Headquartered in Charlottesville, VA
• Since 2009, we have designed and developed innovative storage solutions for your tools, bikes, kayaks, skis, snowboards, surfboards, skateboards, longboards, paddleboards, wakeboards, canoes, fishing rods, and more!
• Our mission is to optimize your storage space while protecting your gear from excess wear and tear. From our first Scorpion Wall Rack designed in our founder's basement, we have now grown to become the most trusted name for outdoor adventurers around the world!
• Free up space in your home, garage, or retail shop and have your gear ready to go for your next trip!

Product description

An Amazon Brand

• 4-shelf shelving unit for your kitchen, office, garage, and more
• Each shelf holds up to 350 pounds with leveling feet, 110 pounds with wheels when not in motion, or 88 pounds with wheels when in motion with evenly distributed weight
• Total max load weight with leveling feet is 1400lbs, with wheels when not in motion is 440lbs, or with wheels when in motion is 353lbs
• Wire shelves adjustable in 1-inch increments
• No tools required
• Durable steel construction with chrome finish
• 3'' industrial wheels for easy moving, adjustable leveling feet also included
• With leveling feet measures 36x14x54.5inches (LxWxH), with wheels measures: 36x14x57.75inches (LxWxH)

User questions & answers

Question:	Can you remove a shelf? Would like to add trash can at the bottom
Answer:	I would place lower shelf all the way to the bottom and set trash can on it then place other shelves where you want. This would keep shelving unit stable. If you need to leave one shelf off keep it and the plastic brackets in case you want to add later.
Question:	Can i buy one additional shelf for the unit i just purchased? it is so sturdy and i would like one more shelf for the very top. thank you
Answer:	Yes, and you can buy a bag of sleeves here for pennies. I have about 10 sets of shelves that I’ve bought here, Walmart, Aldis. The legs are all the same diameter so I’ve been able to interchange shelves to get what I want. The only issue I’ve had is the size of the shelves. Like others have said, check your measurements. If you use the shelf liners do some comparison shopping. Wide difference in price for same thing. I also found a heavy plastic shelf liner roll I can cut to fit. It has tiny parallel ridges that require cleaning with with a nap- like terry- but glasses sitting upside down can breathe so no “bad breath”. Items can be put away still damp as the ridges allow air to move. Love these wire shelves.
Question:	can the 3shelf hold a microwave
Answer:	Only a small microwave. Unit isn't really sturdy enough for larger appliances.
Question:	Are these the industrial size poles that are 1" so I can use shelves I already own
Answer:	The poles we received with the three shelf unit were only 0.75 inches in diameter. The industrial size poles are usually a 1 inch diameter, and are not compatible with the parts we received in this unit.

Product features

Open Shelf Design

Combining a clean, contemporary look with a convenient adjustable design, these shelving units offers open-sided, reliable storage space.

Dynamic Use

A useful addition to any kitchen, storage space, studio, or workshop, each wire shelf can hold up to 73 pounds (evenly distributed).

Height Adjustable Shelves

Fully adjustable, you can move each shelf up or down in 1 inch increments by clipping the black, plastic sleeves around the metal posts.

Additional Features

Featuring a strong steel wire construction, leveling foot caps, removable rolling caster wheels with locking mechanism, and easy no-tool assembly.

• 【LARGE STORAGE SPACE】- Dimensions: 28 x 12 x59 inches (LxWxH), The 5-tier rack has a load capacity of 330lb per tier (evenly distributed). There is no problem to place the storage shelves in the kitchen, warehouse, bathroom, garage, and more.
• 【RELIABLE & STURDY CONSTRUCTION】- The goods rack is built by the galvanized metal frame and durable MDF boards. The metal frame has been powder coated to give it the special look, protecting it from water, rust or corrosion and making it easy to clean.
• 【PROTECTIVE RUBBER PADS】- This black goods organizer is equipped with rubber footpads at the bottom of the legs. These pads effectively protect the floor from being scratched. The footpads also add extra stability and avoid the rack sliding accidentally.
• 【EASY TO ASSEMBLE】- Due to the boltless design, super easily to install. A rubber mallet is recommended for assembly.
• 【100% SATISFACTION GUARANTEE】- If you have questions about the installation or any other concerns, please feel free to contact us. You can enjoy friendly service, we will here for you!

User questions & answers

Question:	Can they be stacked on top of each other
Answer:	The height of each tier is adjustable to meet your different storage needs. There are many positions with the same spacing on the columns. You can snap the boards in for ideal height.
Question:	Can this be taken apart and put back together multiple times? I need to be able to move it to different locations and take down/set up each time
Answer:	Yes and I found out the hard way when I needed to take it apart and start over. You only need a rubber mallet to do either. Very easy.

Product features

5 SHELF HEAVY DUTY STORAGE RACK

This 5-tier shelving unit can be used separately or combined with other shelves into a larger storage space to meet your various needs. Also, the adjustable shelves level to fit a variety of items.

METAL STORAGE RACK

The goods rack is built by the galvanized metal frame and durable MDF boards. The metal frame has been powder coated to give it the special look.

DURABLE AND STRONG

The storage shelves have 8mm thick E1 MDF for placing goods, offer a sturdy bearing capacity up to 330 lb per tier (evenly distributed).

PROTECTIVE RUBBER PADS

This black goods organizer is equipped with rubber footpads at the bottom of the legs. These pads effectively protect the floor from being scratched.

PROFESSIONAL LOGISTICS PACKAGE

All-round protection of the product ensures the shelving unit in good shape. We also thoughtfully provide a pair of gloves to prevent undesired injury during the assembly.

• Durable Steel Frame and MDF boards: Frame is made of steel for strength, which has smooth black finish for resistance to corrosion and give it the extra special look; Middle supporting beam on each tier holds the MDF board more firmly for extra steady.
• Adjustable Height and Versatile Use: The garage shelf levels adjust at every 1.6” increments to fit a variety of items, and it can be build as a shelving unit or horizontal as a workbench.
• Large Capacity: The 5 Shelf Storage Rack has a load capacity of 386lb per shelf (evenly distributed). It features with rubber feet for added stability and also can avoid causing damage to the floor.
• Space Saving: The 5-tier metal storage rack design can enlarge your storage space horizontally and vertically at your places to keep your home neat, tidy and organized,perfect for use in kitchens, bathrooms, rooms, living rooms, warehouses, offices, industrial, commercial exhibitions, hotels, supermarkets, etc.
• Boltless Design and Easy Assemble: Boltless design makes it easy to be built and disassemble, no bolt and no nut required, a rubber mallet recommended for assembly (rubber mallet not included,include a pair of glove, be sure to wear gloves before installation). If you are not satisfied with this storage rack, please contact us!

User questions & answers

Question:	Can you put a lot of can goods on This shelf
Answer:	yep and motors and tools and anything else you can lift up onto the shelves. Strong and sturdy.
Question:	how thick is MDF board on each shelf
Answer:	It's 1/8". My shelves have been in my garage for almost a year and there has been no warping or other issues with any of the boards. I will buy these shelves in the future when I organize my attic!! I love them and they were easy peasy to put together...I did it by myself!
Question:	How much does it hold
Answer:	I have 2 shelves that are holding 100 pounds each with no issues
Question:	How much can it hold
Answer:	According to the description "Large Capacity: The 5 Shelf Storage Rack has a load capacity of 386lb per shelf (evenly distributed). It features with rubber feet for added stability and also can avoid causing damage to the floor." I like that the shelves are adjustable also.

Product description

Industrial grade steel construction with durable Silver vein finish. Z‐beam design beams for strength and rigidity. Five shelves with particle board decking can be adjusted in 1‐1/2" increments. Includes a post coupler to make assembly faster and easier, no nuts or bolts. Can be assembled vertically as a shelving unit or horizontally as a Workbench.

• Shelves are made of particle board supported by double-riveted beams and braces, and adjust in 1-1/2 inch
• Shelving unit with four adjustable shelves and a 3,200 lb. Capacity is suitable for organizing and storing items
• Post connectors allow easy assembly in just minutes

User questions & answers

Question:	Is it actually 36 inches wide or is it
Answer:	Mine are both 36 inches
Question:	Is this rack suitable for a Florida garage? Never indicates it is for use in non-climate controlled areas and I am concerned the shelves will get mold
Answer:	I bought this for inside my house and plan on purchasing more. Shelves are thin particle board material. Even though the are very strong and the whole shelf unit itself is well constructed I do not plan to use them outdoors.
Question:	Is the depth actual
Answer:	Yes, the depth is 18”. High quality and very strong. And they are and quick and easy to build with just a rubber mallet.
Question:	Can I buy extra shelves I'm going to use it to hold my canned goods
Answer:	I don’t think they sell the shelves separately so you can buy extra

Product features

Muscle Rack Heavy-Duty Silver Vein Steel Shelving

The Muscle Rack heavy-duty steel shelving with its patented Z-Beam design is the perfect storage solution for getting any room or area organized. Its attractive and durable silver vein finish make it ideal for your home, office, warehouse, or anywhere storage is needed. This rack can store a variety of items, large or small, with the convenience of shelves that are adjustable every 1-1/2 inches. Heavy items, no problem, each particleboard shelf holds up to 800 pounds of evenly distributed weight.

The shelving unit's modular design allows the unit to be assembled a single 60"H shelving unit, two 30"H shelving units, or as a 30"H 2-piece workbench style unit.

Post Coupler

Post couplers allow easier post assembly and improved rigidity when assembled as a single shelving unit.

Adjustable Height Shelves

Posts are designed with slots every 1.5 inches, allowing the sturdy 800 lb capacity particleboard shelves to be adjusted to accommodate small to large items.

Bolt-Free Assembly

The shelving unit's bolt-free design allows for quick and easy set up. Shelves simply lock into post slots for a secure connection.

Product description

Best Shelves:

A--Bonus 4" Wheels + Leveling Feet - Includes smooth-rolling caster wheels (2 locking) for easy positioning in your garage, office, warehouse, workshop or home.

B--storage shelf is a very tall unit 82"H with wheels, metal Rack has a lot of storage space which is what you need for your kitchen, Garage, restaurant.

WARNING: CHOKING HAZARD -- Small parts.

Not for children under 3 yrsmercial-Grade Shelving:

✔Storage shelf’s layer can be set at any height for your individual needs.

✔Metal rack could accommodate a variety of items.

✔Wire shelving Unit have helped in organizing garage, kitchen, office and so on.

NSF-Certified Metal Wire Shelving: The steel wire of the storage shelf is very durable, so it can hold a lot of things.

The total weight limit of the whole shelf is 2100 pounds when equally distributed on feet levelers. Weight limit of each Wire Shelving is 350 pounds when equally distributed on feet levelers. Maximum entire unit weight capacity is 500lbs when equally distributed on casters.

Dimensions: 48"L x 18"W x78"H (With stationary feet)

Dimensions: 48"L x 18"W x82"H (With Wheels)

storage shelf metal rack wire shelving unit wire shelves heavy duty with wheels 6 tier garage rack layer shelf for pantry kitchen black overall organizer unit durable steel wire layer shelf unit multipurpose unit storage rack

• IMPRESSIVE STORAGE CAPACITY - With six tiers of shelving, this unit boasts an enormous amount of space and shelving. It’s able to provide a great deal of additional storage without taking up too much space itself.
• STURDY AND DURABLE - Constructed from heavy-duty steel wire, this shelf is durable and resistant to dirt buildup and corrosion. Each shelf has a capacity of up to 220 lbs when properly assembled, with a maximum weight capacity of 500 lbs total.
• ADJUSTABILITY - You can adjust the height of the storage shelves in one-inch increments, creating a customized unit best suited for your specific storage needs.
• MULTIFUNCTIONALITY - This metal shelving unit can be used virtually anywhere, in the kitchen, the bathroom, the garage, outdoor shed, and more. It’s perfect for storing tools, clothes, books, and whatever else is taking up space in your home or office. Equipped with wheels, you can transport this unit smoothly and efficiently room to room.
• FAST, EASY ASSEMBLY: The shelving unit comes packaged ready to assemble, and doesn’t require any tools for installation. In just 15 minutes, your unit can be installed and ready to save space.

Product description

Furinno Home living storage and organization Series: 4-Tier no tools tube shelving unit. unique structure: open display rack, shelves provide easy storage and display for decorative and home living accessories. Suitable for rooms needing vertical storage area. Designed to meet the demand of low cost but durable and efficient furniture. It is proven to be the most popular RTA furniture due to its functionality, price, and the no hassle assembly. smart Design: easy assembly and no tools required. A smart design that uses durable recycled PVC tubes and engineered particleboard that withstand heavy weight. Just repeat the twist, turn and stack mechanism, and the whole unit can be assembled within 10 minutes. Experience the fun of D-I-Y even with your kids. : The E2 grade particleboard is manufactured in Malaysia and comply with the rules of production. There is no foul smell, durable and the material is the most stable amongst the particleboards. The PVC tube is made from recycled plastic and is tested for its durability. A simple attitude towards lifestyle is reflected directly on the design of Furinno furniture, creating a trend of simply nature. All the products are produced and assembled 100-percent in Malaysia. Care instructions: wipe clean with clean damped cloth. Avoid using harsh chemicals.

• Wood and Pvc
• Imported
• Simple stylish design comes in multiple color options, is functional and suitable for any room
• Material: CARB compliant composite wood and PVC Tubes
• Sturdy on flat surface. Easy no hassle no tools 5-minutes assembly even a kid can accomplish
• Holds up to 25 lbs per shelf. Product dimension: 23.6(W) x 11.6(D) x 43.25(H) inches
• There are no screws involved, thus it is totally safe to be a family project. Just turn the tube to connect the panels to form a storage shelf

User questions & answers

Question:	What does the space between the shelves in the middle measure in inches
Answer:	I measured from bottom of one shelf to the top of the one below it, not including the shelves, roughly 13 1/2 inches. I have one in my kitchen as storage for extra pots and pans and they fit the larger big ones nicely.
Question:	How far the shelves are from each other
Answer:	13 1/2" between each shelf, shelves are beautiful oak wood grain. 23" across & 11 1/2" deep. Perfect size for any room.
Question:	Are these units structurally combinable? (IE- Could I buy two units and attach them to make it a bit taller
Answer:	They are combinable. I made a large number of 5-shelf units. They are a little unsteady. so they might not be suitable where there are young children. I've connected the units with cable ties where possible. The shelves are sturdy and hold heavy books without any signs of sagging. If you build 5-shelf units, you will run out of shelves and will have risers and the top caps and the feet left over. I've also made some 3-shelf units. I put 1-1/2 inch felt pads on the feet . I think the units are a good value for the price.
Question:	How much weight can each shelf hold - is that info noted anywhere in the instruction manual
Answer:	It does not say in the instruction manual but I am holding quite a bit on mine. For example, the top row has cleaning products and big bottles of laundry detergent (about 30lbs.) Middle shelves are holding at least 40lbs with my tools and tool box, the bottom shelf has probably closer to 50lbs on it. It does come with a wall anchor too which gives it a bit more sturdiness.

Product features

Simply turn and adjust into any height

Furinno Turn-N-Tube Home Living Storage and Organization Series consists a list of products in different sizes, shapes, colors, with the same concept of easy assembly. The tube and panel systems can be adjusted to different heights by adding or reducing tiers. These shelving units can be placed in any room to provide additional storage spaces. They come in different colors to fit in the theme of your existing furniture collection. Made from materials that are tested for durability and strength.

Product description

Organize and sort your space with Seville Classics Commercial 7-Shelf Bin Rack Shelving System. Shelving is finished in a platinum powder-coated epoxy. This model features 22 polypropylene (PP) bins of three different sizes: 12 Medium (14" D x 5.5" W x 5.5" H); 6 Large (14" D x 10.5" W x 7" H); 4 X-Large (14" D x 16" W x 7" H). Includes 22 bin labels and four 3-inch black wheels with two locking. Bins slide out and lock for easy use. Systems are NSF-Certified for storage in commercial environments. Units may store up to 150 lbs. per shelf when assembled on leveling feet, 25 lbs. per shelf on casters. Systems are also modular and can exchange shelves with other Seville Classics units of the same pole diameter and shelving dimensions. Unit’s assembled dimensions measure 14" D x 36" W x 56" H. Ideal for use in garages, warehouses, mail rooms, schools, offices, work centers, and retail environments. Do not move bin rack while loaded

• 22 polypropylene bins in three different sizes (M, L, XL)
• Bins slide-out and lock for ease of use and safety
• Certified by the NSF to NSF/ANSI Standard 2 - Food Equipment, for use in restaurant and commercial environments
• Platinum epoxy finish for protection against corrosion in dry environments
• Includes four 3-inch wheels with two locking wheels
• Shelves adjust at 1-inch increments
• Do not move bin rack when loaded
• Patented

Specifications

Dimensions: 36" W x 14" D x 56" H

Capacity: 25 lbs. per shelf

Capacity on Leveling Feet (not included): 150 lbs.

Model #: WEB452

What's in the Box?

4 pairs of poles (1" diameter)

7 shelves (14" x 36")

4 extra-large bins

6 large bins

12 medium bins

28 slip sleeves

30 bin labels

4 wheels (3" diameter)

Limited 1-Year Manufacturer's Warranty

Seville Classics products are backed by a 1-year limited warranty unless otherwise specified. The warranty protects against original defects in material or workmanship under normal home or office use for the duration of the warranty period.

• 22 polypropylene bins in three different sizes (M, L, XL)
• High capacity shelves measure 14-inches deep by 36-inches wide
• Certified by the NSF to NSF/ANSI Standard 2 - Food Equipment, for home, commercial and and office environments
• Includes four 3-inch wheels with two locking wheels
• Platinum epoxy finish for protection against corrosion in dry environments

User questions & answers

Question:	How rust resistant are these shelves? Would they work well inside a non-air conditioned garage in Florida? Is one finish better suited than another
Answer:	Minor in a non-air-conditioned garage. I am Magine in 10 years they may get rusty. But you could always give them a quick touchup with some spray paint. I believe mine will last for 20 years or longer
Question:	Do the shelves go with the lip up or down? before i go any further i want to know - does it matter? currently have the lip up and the bottom shelf on
Answer:	Do not know what you mean by lip up. I guess you mean the ledge at rear of shelf well it would go up to prevent bins from falling off back. And the shelf should only properly go one way, because holes are tapered to lock in. Hope this was helpful.
Question:	Does Seville offer a divider for the smallest bin ? I bought dividers for the 2 largest bins with this set, but do not see any for the smaller bins
Answer:	Hello, The smallest bin which is a medium sized bin does not have a divider. We have dividers only for the Large and XL bins. Amazon guidelines prohibit posting our phone number, however our customer support phone number or email address can be found on our website, by clicking the "contact us" link at the top of the web page. Thank you, Stephania
Question:	Is there a cart cover that can be purchased for this cart
Answer:	Hello, Thank you for your question. We do not sell a cover for the bin rack system. Amazon guidelines prohibit posting our phone number, however our customer support phone number or email address can be found on our website, by clicking the "contact us" link at the top of the web page. Thank you, Stephania

Product features

Commercial 7-Tier NSF 22-Bin Rack Storage System, NSF Certified

Store supplies and tools with Seville Classics 7-Tier Bin Rack Shelving system. Unit features 22 gray bins in three different sizes. Bins slide out and lock against the frame for safe, easy access. System is certified by the NSF to NSF/ANSI Standard 2 - Food Equipment, for use in commercial environments. Our shelves are designed for heavy-duty work with industrial-strength steel wire and a platinum epoxy powder coat for defense against corrosion. Ideal for use in garages, warehouses, mail rooms, schools, offices, work centers, and retail environments.

NSF Certified

Rest easy knowing these shelves are certified by the NSF to NSF/ANSI Standard 2 - Food Equipment, for use in dry environments. Designed with multipurpose storage in mind, these shelves are ideal for professional and personal scenarios.

Industrial Strength Steel

Units are constructed of steel wire for reliable, high-capacity storage. Install the included leveling feet for heavy storage – up to 150 lbs. per shelf.

Limited 10-Year Warranty

The warranty protects against original defects in material or workmanship under normal home or office use for the duration of the warranty period.

Platinum Epoxy Protection

Corrosion resistant and easy to clean, a platinum epoxy coat ensures your Seville Classics shelving system is protected from the elements and will stand the test of time.

Assorted Bins

Included are 12 medium bins, 6 large bins, and 4 extra large bins. They slide out and lock for convenience.

Labels

There are labels included to help you easily identify your things.

Bin Dividers

Use these bin dividers to create the space that you need.

Easy Mobility

Ability to transport multiple items with ease.

Office

Great storage solution for arts and crafts and other office supplies with the different bin sizes.

Workshop

Safely store and organize sharp and small objects in your workshop.

Product description

Customer Attention: For upgrade version, We have removed 3m tapes from hardware kits, only keep screw/studs installation for long time usage. Pls make sure your accept before order placed



TOOL STORAGE ORGANIZER:

This industrial wall organizer has both gripper / rolling to hold handles, and four hooks to hanging other cleaning supplies on.

The wall hooks and hangers can be installed indoors ( kitchen Laundry room bathroom

garage shop) and outdoor garden yard, to hold cleaning stuff, or garden tools.



PRODUCT DETAILS:

High Quality Stainless Steel, Suitable for all indoor and outdoor environment!

Triangle-Buckle & Petal-Shaped Gear Design,the anti-slide clips can adjust automatically

along with the different thickness of the handles,fit any tools you want to hang



PACKAGE INCLUDES :

1 x Broom Mop Hooks with 3 Unit Clamps 4 Hooks

4 x Screw

4 x Anchor

4 x Screw Cover



EASY TO INSTALL AND USE:

Screws Drilling installation steps as below:

1）Choose the suitable position for the garage hooks.

2）Drill holes at the positions you marked.

3）Put the screw anchors into the holes.

4）Put the tool on the wall and tighten up the screws.



SATISFACTION GUARANTEED:

We committed life time warranty for the utility rack. Any problem, contact us.

• ✔️INDOORS & OUTDOORS -Perfect for the kitchen,bathroom,garage, shed, mub room, basement or commercial use,thanks to the waterproof design, this garage hangers even works outdoors or on the shed for your garden rack tools!
• ✔️ NO-SLIDE - Cleat rake hanger and hooks with 30 pounds holding capacity! Thanks to the spring-loaded, anti-slip clip, we are sure nothing slides and keep long stick shovel rake more stable.
• ✔️Sturdy Hooks-foldable and extremely sturdy hangers and hooks with stainless steel hook edge design, easy to hung on.
• ✔️Space Saving -The Hooks and hangers keep your closet,laundry room,shed,garden,basement or laundry room clean and neat. Perfect for tools home storage and organization.
• ✔️100% Customer Satisfaction - We provide lifetime warranty for the garden tool organizer. You can buy with no worry.

User questions & answers

Question:	What is the minimum and maximum diameter tool it will hold in the grip? Don’t know? Don’t answer
Answer:	Hi customer, the grip can hold handles dia. within 3/4" to 1-1/2". thank you for the good answer
Question:	What size are the screws that are provided
Answer:	#8 screws about 1 1/2 inches long and metal caps to cover the heads.
Question:	Do you think it will hold tennis rackets
Answer:	No problem
Question:	Can this be mounted on stucco wall
Answer:	No problem, it is wall mounted for all surfaces.