10 best dc clamp on amp meters

• True-RMS clamp meter: This multimeter can accurately measure AC/DC Current, AC/DC Voltage, Frequency or Duty Cycle, Resistance, Capacitance and also provides Diode, Continuity and Temperature tests. True RMS for accurate measurements on non-linear loads. Easy to use for labs factories and household.
• LowZ & LPF: Low input impedance helps prevent false readings due to ghost voltage. Low Pass Filter (LPF) for accurate measurement of variable frequency drive signals when measuring motors and transformer. To measure the current you need to clamp the meter around one of the wires and not the whole power cord.
• NCV Detection Function: Non-contact voltage detection effectively check electrical status through measuring EM field intensity without touching any wires; The NCV button lies on the right side. Simply place your thumb on it and push.
• Multi-function: Two-color backlit LCD Display - When the voltage > 80V, the current > 3A, the LCD backlit screen turns red to warn you of high voltage/ LED Flashlight / Temperature Measurement for liquids and air conditioning ports included K-Type Thermocouple / Low Battery Indication / Auto power off after 15 minutes inactivity.
• Safety Service: Safety standard IEC 61010-1, CAT III 600V. Double insulation. 36 Months product service provided. 7/24 Customer Service.

User questions & answers

Question:	What are the concrete tips for automatic shutdown
Answer:	Step 1.) Run around in circles until u get too dizzy to continue or 15 min has passed, then it will auto shut off. 2.) There is no step two. If you have further questions or need more concrete tips, just continue repeating step 1 until it sinks in.
Question:	W/ backlite on I tilt the meter away from me the display is readable but once I tilt it towards myself the display becomes unreadable, is this normal
Answer:	Yes, with the baclklight on, it's viewable from straight-on to tilted away from yourself, but with the top tilted towards you it loses all contrast. Side-to-side viewing angle is a good. This is a common trait among some LCD displays.
Question:	I want to measure current flowing to my car starter when cranking engine. Does this clamp on meter measure DC current when using clamp
Answer:	Yes, It can read DC starting current with the clamp when set to DC measurement. Reading moves fast but I take video with mobile phone camera and rewind to see the 268A when starting a Nissan Frontier 2.5 L engine. Reasonable current though I cannot check its accuracy yet. I buy meter to monitor DC charging current and confirm non-running car leaking currents under 50mA but need to wait 20 minutes after engine off to let car computer stabilize from initial shutoff which can cab be as high as 0.6A. With this meter, I also find about 10mV leaking voltage on plastic surface between terminals at new battery (due to acid filling spill at manufacturing?) from club store which I need to reduce the Voltage drop to less than 0.1 mV by scribing several grooves on plastics surface around terminal posts. Calibrate to zero by holding Z/F button few seconds before measurement can help read accuracy. I am happy with this meter for the price. Hope you too if do not have time to find a better cheaper on
Question:	how accurate is th DC current measurment
Answer:	I have not checked it against a reference, but I have done some measurements on my car with this. It seemed to reflect a reasonable value when the battery charger was on, showing charging current. and It showed a big current for the started that was believable. When you first set it, you can press a zero button to zero it out. Then I looked at a really bad solar panel that could only put out about 50 milliamps when shorted, and it was able to show that pretty well. So the bottom line, if you are going to use this for debugging stuff, it seems pretty good. If you are going to measure calorie input to control a chemical reactions in a pharmaceutical lab, I can't say. For me, it is just cool that it can do a DC current in the first place. Has already come in handy as I was able to determine my alternator was not charging my battery quite easily.

Product features

To measure Direct Current

Specifications:

If current> 3A, the orange display lights up.

The measuring range of DC current is 60A/600A. Accuracy: ±(2.5%+5).

Note:

Before measuring the DC current, long-press and hold the Z/F key until the ZERO character appears to clear the data.

To measure Alternating Current

Specifications:

If current> 3A, the orange display lights up.

The measuring range of AC current is 60A/600A. Accuracy: ±(2.5%+5).

Note:

To measure the current you need to clamp the meter around one of the wires and not the whole power cord. The power cord contains two wires carrying current and ground wire. The current in two wires always flows in opposite directions, so the magnetic fields from two wires canceling each other, therefore the meter reads 0 A.

Grasp the individual current conductor to be measured and close the current clamp again. The measured conductor must be placed in the center of the clamp, otherwise, additional errors will occur.

Jaw Design

The Jaw is marked with maximum voltage and current measured value. Suitable for one-hand operation.

Weight & Size

Weight :260g. Size: 7.5 x 2.8 x1.3 inches.

Small and light, easy to carry when working.

Packing List

1 x Kaiweets Digital Clamp Meter 1 x Test Leads (Pair), 1 x Thermocouples(Pair), 2 x AAA batteries, 1 x User Manual, 1 x Carrying Bag

Z/F Button Measurement

Press the "Z/F" button to switch the respective secondary function between the different measurements such as between AC and DC.

Automatic Shutdown

No operation in 15 minutes, the clamp meter beeps 3 times. Without further operation, it beeps again and switches off automatically.

Multi-Function

Accurately measure resistance, capacitance, diode, continuity. Easy to use in laboratory factories and homes.

• ⚡【Remotely Monitoring on Your Phone】 Built-in wireless connectivity can auto connect to your Android / APPLE phones or tablet with ease, allows you viewing logging the data out of the arc flash zone 15m (50 ft) away, and save the measurement for detailed analysis, sharing later.
• ⚡【AC/DC Ammeter Voltmeter】 This clamp multitester can accurately measure AC/DC Amperage, AC/DC Voltage, Frequency or Duty Cycle, Resistance, Capacitance and also provides Diode, Continuity Buzzer and Temperature(℃) tests. Easy to use in non-contact ampere measures, troubleshoot electrical problems in cars, boats battery motors, household appliances, HVAC
• ⚡【Continuous Data Logging DMM】This clamp-on meter can displays AC DC amps, volts, ohms, Cap, Hz Temp in Max/Min/Avg on the same display with real-time reading. The curve graph w/ timing will show you the changes of amp volt flow more visually. Also supports adjustable data logging rates for continuous testing/ recording unless the battery is dead or the memory is full.
• ⚡【Accurate Voltage Amperage Meter】0.1A resolution for 0.1~400A AC DC amp, 1A for 400A~1000A to support accurate amp reading, this clamp amp probe meter is more user-friendly for high current measurement.
• ⚡【Clamp On Live Wire for Measurement】To measure amp with this clamp meter, you MUST separate the hot and neutral conductors, and clamp around only LIVE wire for measurement otherwise they will cancel each other out and give a zero amp reading. The most convenient way without peeling the cord is clamp on an AC Line Splitter

Product features

BTMETER BT-570CAPP Intelligent Autoranging Digital Clamp Multimeter

• Phone/Tablet APP "intelligent clamp meter" available on App Store, Google Play.
• Average sensing, calibrated to rms of sine wave on AC Volt, AC Amperage test.
• This AC/DC clamp-on ammeter is ideal for remotely troubleshoot electrical problems
• Sync electric data to your phone via Bluetooth APP, display all measurement and generates analog waveform graph on APP
• Default setting to stays on to support continuous measuring, data logging, transfer the data in excel/txt. You can set auto shut down in the APP

Wireless Connect with your Phones

Automatically pair with one bluetooth device in just few seconds.(Shut down other unnecessary bluetooth signals during pairing.) The App can be used in IOS 7 or android 4.30 and up. Support Bluetooth 4.0 version.

Both AC/DC Volt Amps Clamp Meter

It can accurately measure DCV to 0.1m volt, ACV to 1m volt; DC/AC Current to 0.1 amp; Resistance to 0.1 ohm. Features with “REL” to zeroing for magnetic environment to make sure you get accurate readings anytime,anywhere.

Remotely Monitor Logging

The app will synchronous display the readings, also with MAX/MIN/AVG and measuring time, it means you can remotely record the readings every 1-120 mins from different floor, ground to roof, within 49ft.

• 🎁 Gift for Men
• 🗜️【Multi-Purpose Clamp Meter With True RMS Auto-Range】Accurate AC/DC Voltage, AC/DC Current, Frequency, Continuity, Duty Cycle, Diode, Capacitance and Resistance Measurement.
• 🗜️【With NCV & Live Line Test Function】Non-contact Voltage Detection Function with a Sensor to Detect Voltage and Avoid Electric Shock without Touching Any Wires. Light and Sound Alarm If Detects the AC Voltage (90V-1000V) or Live Wire.
• 🗜️【Continuity Test & Overload Protection】Designed to Safely and Accurately Confirm the Circuit Conducts Electricity with Low Voltage Indication and Overload Protection. Light Alarm If Detects the AC Voltage (90V-1000V) or Live Wire. Shows "OL" on the LCD If Overload.
• 🗜️【Easy To Use And Read】Small and Portable to Carry and Use. High Resolution, Large Backlit LCD Screen Improves Visibility. The flashlight can Access Measurement in a Dark Place. Low Battery Display. Widely used in your life.
• 🗜️【You Will Get】Meterk MK06 Digital Clamp Meter 4000 counts, 2* Test Leads, 3* AAA Batteries, User Manual(English + French + German + Italian + Spanish) , 1* Storage Bag.

Product features

• [1mA Sensitivity]: 1mA sensitivity when measures AC/DC current by clamp.
• [Dual Line Display]: Dual line display can show both AC voltage/current and frequency or Celsius and Fahrenheit on the screen.
• [Low Impedance Mode]: Low Impedance (LoZ) mode for identifying and eliminating ghost or stray voltages.
• [Activate V-Alert at Any Function]: Activate V-Alert (non-contact voltage detection) function under any function design makes non-contact voltage testing more convenient.
• [Back Clip Design]: Back clip design make it more portable, hang on your belt or pocket.

User questions & answers

Question:	Is this basically the same unit as the Uni-T 210D
Answer:	Hi, Thank you for your interest in Wuloo Wireless Intercom System product. Yes, you can do that. This intercom can be expanded communication stations without limit, you can set different or the same channel for each unit. If you need any other help, please to contact us in time, we will try our best to solve the problem for you. Best wishes to you. Wuloo Customer Service Team
Question:	with the clamp can you measure amps in DC ?. Up to how many amps maximum
Answer:	The latter is correct. Use one dimmer switch and one non-dimmer switch (toggle switch).
Question:	what is the minimum dc amperage it will measure? 1ma
Answer:	Any regular 3-way switch will work. Your choices will be if it is 15 or 20 amp (based on your existing circuit, which is usually 15 amp in a home), color, Decora style or toggle.
Question:	Is it true rms with the amps
Answer:	yes
Question:	Will this work with craftsman 1/2 hp 13953615sr garage door opener
Answer:	15 amp max
Question:	It will work for Raynor aviator 1/2 HP
Answer:	Switch includes 3V CR2032 lithium button battery with 10 year+ battery life.
Question:	When the laser is blocked from the receiver, does the receiver send a signal, or does it stop sending electricity
Answer:	the goconex switch will fit a standard decora cover plate, or you can mount it in a wiremold starter box , or you can mount it in a mounting bracket for low voltage outlets.
Question:	Works on the model 1260lm lift_master
Answer:	It will. You will actually be controlling the transformer that converts 110v to low voltage. The transformer itself must be dimmable in order for it to work.
Question:	What kind of battery would I need to operate this motor
Answer:	Yes, they certainly should if you are within the parameters of the load limit and distance of transmission. I have it controlling two strings of outdoor led lights. It works pretty well. The dimmer control is touchy though.
Question:	A power supply like this perhaps? https://www.amazon.com/dp/b014643yhg/_encoding=utf8?coliid=i36j2228fa8htu&colid=fdkfbm8j4xj
Answer:	I used 12/2 wire on mine and when I pushed things back in the wire box I must've dislodged the white neutral as the blue light keeps blinking. When I get a chance I'll shut the power off and check. The switch does work without the remoted though and it is not lit.
Question:	Hello, can this motor be speed controlled
Answer:	Hi, Of course. Smart light switch works with Alexa, Google Assistant, IFTTT. Please see following to sync with Alexa. 1, Setup with Smart Life at first 2, Set your Echo Speaker by Alexa APP/Google Home APP. 3, Enable a Skill which is "Smart Life" in Alexa APP/Google Home APP. 4, Link your smart life account to skill. 5, Tap “Done” and discover the smart plug and control your device with voice. Any supports, service@avatarcontrols or Amazon Message is always be here for you!
Question:	How much weight can this lift
Answer:	Neutral Wire,Load Wire,Live Wire are required. A ground wire is not required, but is recommended.
Question:	Concerning asin #b07z812f6m; can i buy additional remotes? i want 4 or 5 remote transmitters to control one receiver switch
Answer:	Sorry, it may not. It is compatible with Tuya and Smart Life APP.
Question:	What are the dimensions of the controller
Answer:	Yes you can, we currently have them both attached with extension card. James
Question:	Can more than one be used in close proximity? are there individualizing dip switches
Answer:	Dear Customer, Newpow offers a free 12-month warranty. We will send you a replacement product. P.S. Since we don't know your order number, we can't contact you. Please Email us at [email protected] (guaranteed response within 24 hours), or contact us via Amazon order. Best regards, Newpow
Question:	Can i control two relays “a” and “b” from the pictured key fobs
Answer:	Yes, it has been tuning it off at that same time in my usage.

• [Ultra Steady & Accurate]: The new generation of our best-selling clamp meter ever - now more steady and accurate when test current, especially super low current.
• [0.1mA AC Resolution]: Delivers 0.1mA AC resolution and sensitivity.
• [1mA Resolution]: Delivers 1mA resolution and sensitivity, which make it a great a tool for measuring such as parasitic draws.
• [Dual Line Display]: Dual line display can show both AC voltage/current and frequency on the screen.
• [Probe Holder]: Side probe holder make measurement more convenient, especially for narrow or tight space environment.

Product description

BTMETER

A professional Test & Measurement solution provider.

We dedicated ourselves to test, measurement and monitoring instrument and software that are widely used in electrical, HVAC, automotive,network troubleshooting, as well as in hobbist,electrical, industrial, medical applications.

Why BT-570N Pro Clamp Multi-meters?

• - Auto(15mins without operation) / Manual shut down optional 
• - High resulotion,True RMS for increased accurate measurement regardless of waveforms.
• - 6000 counts Large Backlight LCD screen makes this current clamp meter  easy to read.
• - Average sensing, calibrated to rms of sine wave on AC Voltage, AC Current test
• - Easy to use, comes with all accessories to start (9V battery, thermocouple, test leads, multimeter case)

Specifications:

• 6000 Counts Auto Ranging clamp tester
• DC Voltage: 600mV,6V,60V,600V,1KV
• AC Voltage: 600mV,6V,60V,600V,750V
• DC Current: 200A,1000A(Resolution 0.1 amp/ 1 amp)
• AC Current: 200A,1000A(Resolution 0.1 amp/ 1 amp)
• Resistance: 400Ω,4000Ω,40KΩ,400KΩ,4MΩ,40MΩ
• Capcitance:9.999nF, 99.99nF,999.9nF,9.999uF,99.99uF,999.9uF,9.999mF, 99.99mF
• Frequency:9.999Hz,99.99Hz,999.9Hz,9.999kHz,99.99kHz,999.9mHz
• Duty cycle:0.1%~99.9%
• Temperature:-20℃~-1000℃(-4℉~1832℉)

More features:

• Data Hold
• Diode Test
• Relative Value
• Auto Power OFF
• Low battery indicator
• Inrush Current Test
• Backlight(Manual turn on/off)
• Automatic negative polarity indication

• ✅TRUE RMS CLAMP MULTIMETER - 6000 Counts accurately measures AC DC current to 1000A , voltage , resistance, capacitance, frequency, duty cycle. Even more testing on Temperature (℃/℉), Inrush Current, Continuity test with buzzer, Diode test.
• ✅PROFESSIONAL LEVEL - High resulotion,True RMS allows you get accurate measurement regardless of waveforms. Relative mode for Capacitance, DC Zero and offset adjustment, data hold, max/min, auto power off, polarity and low battery indicator.
• ✅SAFE AND EASY TO USE - Overload protection on all ranges. Use this Clamp Amp Meter for unidentified wire testing, Non-contact amperemeter test for amperage, Avoid electric shock without touching any wires.
• ✅HIGH ACCURACY AMPERAGE METER - 0.1 amp resolution ratio for AC DC Amp measurement for 200A, 1A amp resolution for 1000A. Ideal measurement tool to troubleshoot electrical mechanical problem of cars HVAC household appliances safely and accurately
• ✅LARGE DIGITAL DISPLAY - Well built with backlit LCD for visibility in dimly light areas. Extensible thermocouple probe support measures high temperature from -4 to 1832℉(-20 to 1000℃). Jaw Caliber Size 1.77 inches (45mm)

User questions & answers

Question:	Does the BT-570N clamp measure dc inrush current
Answer:	Hello! Thank you for your question. Unfortunately it does not come in Brushed Nickel finish at this time.
Question:	What’s the app name? i can’t find the app in the apple app store
Answer:	It should hold a jumbo size roll. I use Scott’s 1000 sheet rolls, so if you can compare your paper to the Scotts
Question:	Can i use this clamp meter to test the amperage, ohms, and inrush current on my car audio amplifier, alternator, battery, and subwoofers
Answer:	We moved and I had to leave it since it was attached to the wall, but I can tell you it holds a standard magazine nicely. If i had to guess I'd say the basket is roughly 12"across the top and about 10" high. Hope this helps.
Question:	Will this device measure 0.5-10 amps ac or dc? (as in hvac applications
Answer:	It is open across the back. Two down wires have screw eyes for mounting. 3M hooks might work but it must be against a wall. Unless your kids are small they may not be able to get their hands to the bottom and small items may not stay inside. Hope this helps.

Product features

BTMETER BT570N Auto Range True RMS Digital Clamp Meter is a Strong protection , handheld professional Tools

This clamp meter can be used to troubleshoot electrical problems safely and accurately in a wide array of industrial and household devices.

It's compact, lightweight but durable and very easy to operate. It can measure AC/DC current, AC/DC voltage, resistance, continuity(buzzer), Inrush Current, True RMS, transistor and diodes with a very high degree of accuracy .

Jaw Size up to 1.77 inches ( 45 mm ) for measuring many size cables flexible.

Large diameter opening for easy use

Jaw Size 1.77 inches ( 45mm ) suitable for most jobs . Designed accord with CATIII 1000V standard . Strong protection to troubleshoot a variety of automotive and household electrical safely and accurately.

Inrush current test function

Inrush current is the maximal instantaneous input current drawn by an electrical device when first turned on. Alternating-current electric motors and transformers may draw several times their normal full-load current when first energized, for a few cycles of the input waveform. And often having inrush currents much higher than their steady-state currents, due to the charging current of the input capacitance. The selection of overcurrent-protection devices such as fuses and circuit breakers is made more complicated when high inrush currents must be tolerated.

High Temperature measure range

Temperature measure range -20℃~-1000℃(-4℉~1832℉) by test probe . ℃ / ℉ unit Selectable.

• [Multipurpose True-RMS AC DC Amp Clamp Meter]: The auto range clamp multimeter can measure AC/DC current, AC/DC voltage, resistance, capacitance, temperature, frequency(Hz) and continuity. It is an ideal troubleshooting meter to help you solve automotive or household electrical problems quickly and safely.
• [1mA Resolution]: 1mA resolution when measures AC/DC current by clamp.
• [NCV & Live Wire Test Function] Push the V-Alert (NCV) button to activate non-contact voltage detection under any function gear. If AC voltage detected, the LCD backlight will shine red light and the beeper will sound.
• [Low Impedance Mode]: Low Impedance (LoZ) mode for identifying and eliminating ghost or stray voltages.
• [Additional features]: Pocket size, High resolution, LCD backlit , Data hold, Auto power off

User questions & answers

Question:

Dc current? i find it difficult to believe you can measure dc current using the built-in clamp. no no no

Answer:

Hi, Thank you for your attention for Wuloo wireless intercom system. This intercom system signal range is 1 mile in open area, it may be shorter 1/2 mile between metal buildings, so there should be no issue for this intercom to work between your home and shop which is in a metal building about 200 feet distance. If you have any other questions, please feel free to contact us, we are always happy to service for you. Have a nice day. Wuloo Customer Service Team

• ✅【Multifunction Clamp Multimeter】Accurately measure AC voltage: 6V~750V;DC Voltage: 600mV~1000V;AC Current: 600A~1000A;DC Current: 600A~1000A;Resistance：600Ω~60MΩ, Capacitance: 6nF～60mF, Frequency: 9.999Hz~9.999MHz, Duty Cycle, Diode & Continuity Test.
• ✅【Bluetooth APP Clamp Ammeter】It can be connected with mobile phone by Bluetooth, Auto pair with Android / IOS phone via bluetooth nearby, It's easy to install, just scan the QR code or search “AiLink” in Google play or APP Store, so you can measure data and analyze it by mobile phone APP. NOTE: The mobile phone APP can be installed in iphone 4S iOS 7.0 or android 4.30 system and up.
• ✅【Temperature Test】AP-570S-APP Clamp Meter comes with the thermocouple for water tank, Auto manual ranging switchable. You can switch the unit of ℃ or ℉ just see which you need; with the backlight function, which let you get a clearly readings even in the dim environment.
• ✅【NCV Clamp Meter】Without touching the electrode, you can detect whether there is voltage on the wire. It is especially safe and convenient for amateurs. And the lamp light will light up together with sound，In addition, the clamp meter itself has a double insulation design，Giving more effective protection during working.
• ✅【AC DC Amp Meter】From 0-600 amps, the current resolution is 0.1A (100ma). From 600-1000 amps, the current resolution is 1.0A； Ideal non-contact ampere meter for troubleshoot electrical problems, If you have any questions about the product in daily use, Welcome contact us, we will solve the problems for you ASAP.

User questions & answers

Question:	Are amps really only read from 600a to 1000a? I need to read down to 1a
Answer:	For what I've used it so far, it seems pretty flexible. Did not move it much but had problem keeping it at where I wanted.
Question:	Does this meter have an auto function? does automatically go from ac, dc, to ohms
Answer:	Latching. U press it again to change the state.
Question:	What is temperature range and the accuracy of the temperature probe
Answer:	Hi Denise, Thank you for your attention for Wuloo wireless intercom system. Yes, the monitor function has a 10-hour time limite, if you need to monitor for a longer time , you have to reset it again every 10 hours. About this issue, this is the working principle of the intercom system. In order to protect the components of the device, it cannot be in the launch state for a long time, otherwise the unit is easily damaged. Thank you for your understanding. If you have any other questions, please feel free to contact us, we are always happy to service for you. Have a nice day. Wuloo Customer Service Team
Question:	Will it measure milliamps
Answer:	No, the unit I have is Black, a piece of well placed electrical tape would almost disappear if you want to cover the display. The channel, code & menu keys are still exposed someone could push by mistake... and change operating frequency. Maybe cover those too. Out of sight out of mind. But tape easily removed to reset settings.

Product description

Why BTMETER BT-570CAPP Pro Clamp Multi-tester?

1. Free APP available for download on App Store,Google Play, Life-time support
2. Average sensing, calibrated to rms of sine wave on AC Voltage, AC Current test
3. It won't auto shut down to support continuous measuring, data logging and then export the data in excel or txt file.
4. It's compact, easy to use, comes with all accessories to start (9V battery, thermometer probe, test leads, multimeter case)
5. Fast responding data to your phone via Bluetooth APP, display all measurement and generates analog waveform graph on APP 

Range and Accuracy:

• Range Selection: Auto Ranging
• DC Voltage: 400mV,4V,40V,400V(Accuracy: +/- 0.5% + 2 digits); 1KV(Accuracy: +/- 0.8% + 2 digits)
• AC Voltage: 4V,40V,400V(Accuracy: +/- 0.8% + 3 digits); 750V(Accuracy: +/- 1.2% + 3 digits)
• DC Current: 200A(Accuracy: +/- 3% + 10 digits); 1000A (0~800A: +/- 3.5%+10 digits; 800~1000A: +/-6.5%+10 digits)
• AC Current: 400A(Accuracy: +/- 3% + 10 digits); 1000A(0~800A: +/- 3.5%+10 digits; 800~1000A: +/-6.5%+10 digits)
• Resistance: 400Ω(Accuracy: +/- 1% + 3 digits),4000Ω,40KΩ,400KΩ,4MΩ(Accuracy: +/- 1% + 2 digits) 40MΩ(Accuracy: +/- 1.5% + 3 digits)
• Capcitance:51.2nF(Accuracy: +/- 3% + 3 digits), 512nF,5.12uF,51.2uF(Accuracy: +/- 2.5% + 5 digits); 100uF(Accuracy: +/- 5% + 10 digits)
• Frequency:5.12Hz, 51.2Hz,512Hz,5.12kHz,512kHz,5.12mHz (Accuracy: +/- 0.1% + 5 digits)
• Duty cycle:0.1%~99.9%
• Temperature:-20℃~-1000℃(-20~ 150℃ Accuracy: +/- 3℃ + 1 digits ; 150~1000℃ Accuracy: +/- 3%+ 2 digits;)

• ⚡【AC & DC Digital Clamp Multitester】 4000 Counts Auto-range AC/DC amps clamp multimeter measuring AC/DC current, AC/DC voltage, Resistance,capacitance, audible beep continuity, Temperature, diode and Frequency(Hz),Duty Cycle, Data Hold.
• ⚡【Bluetooth APP Clamp Ammeter】 Auto pair with Android / IOS phone,support for real-time measurement reading in Max/Min/Average, with timing and curve graph. And save the measurements in TXT/Excel files for data logging
• ⚡【AC/DC Inductive Clamp Amp Meter】Neat Bright Backlit LCD display, Big Jaw Caliber Size 1.77 inches. Make sure press “REL” to zero out the meter before clamping, or the meter will show bias numbers without any wire in the clamps due to the magnetic field.
• ⚡【Accurate Voltage Amperage Meter】0.1A resolution for 0.1~400A AC DC amp, 1A for 400A~1000A to support accurate amp reading for low and high current. Ideal non-contact ampere multimeter to troubleshoot electrical problems in automotive, household, HVAC,12V/24V vehicle boat motor diagnosis
• ⚡【Clamp On Live Wire for AC DC Amp Test】To measure amp with ANY clamp meter, you MUST separate the hot and neutral conductors or they will cancel each other out and give a zero amp reading. The most convenient way without peeling the cord is clamp on an AC Line Splitter

User questions & answers

Question:	I really like this clamp meter,but how can i control over scales on the graph in my app
Answer:	This is specially for motorbikes and you will need an extra part to use it. there are others Autometers options for cars whose you will not need other part to install it.
Question:	Como octener la app
Answer:	120 years
Question:	How do you change temperature display to show degrees Fahrenheit instead of Celsius
Answer:	It looked good in my foxbody. Dash is about the same size. The tach is 4 inch .
Question:	Is there a way to manually set the graph scales on my android phone? i am reading dc amps of around 1 amp and it displays is on a 400 amp scale
Answer:	Yes

Product features

BTMETER BT570C-APP Auto Ranging Digital Clamp Meter is a intelligent , handheld professional multimeter

This clamp meter can be used to troubleshoot electrical problems safely and accurately in a wide array of industrial and household devices. And store the detection data on the phone via APP.

It's compact, lightweight but durable and very easy to operate. It can measure AC/DC current, AC/DC voltage, resistance, continuity(buzzer), transistor and diodes with a very high degree of accuracy .

Jaw Size up to 1.77 inches ( 45mm ) for measuring many size cables flexible.

Easy to connect with your Phone

Automatically pair with one bluetooth device in just few seconds.(Shut down other unnecessary bluetooth signals during pairing.) The App can be used in IOS 7 or android 4.30 and up. Support Bluetooth 4.0 version.

High Accuracy

It can accurately measure DCV to 0.1m volt, ACV to 1m volt; DC/AC Current to 0.1 amp; Resistance to 0.1 ohm. Features with “REL” to zeroing for magnetic environment to make sure you get accurate readings anytime,anywhere.

Easy to use on APP

The app will synchronous display the readings, also with MAX/MIN/AVG and measuring time, it means you can remotely record the readings every 1-120 mins from different floor, ground to roof, within 49ft.

Product description

INGCO Auto Ranging Digital Clamp Meter TRMS 6000 Counts, Measures AC/DC Voltage, AC/DC Current, Resistance, Capacitance, Diode Test, Temperature DCM6005

Specifications:

Duty: 1%~99% ±(1.0%+2)

Temperature: -40°C~1000°C (-40°F~1832°F ) ±(1.0%+2)

AC Current: 6A/60A/600A/±(2.5% +8)

AC Voltage: 600V ±(0.8% +5)

DC Current: 60A/600A ±(2.5%+5)

DC Voltage: 600V ±(0.5% +3)

Resistance: 6kΩ/60kΩ ±(1.0% +3)

Capacitance: 10nF/100nF/1nF/10uF/100uF/1mF/10mF/100mF ±(4.0%+3)

6000 Counts/Data Hold

backlight /flash lightlower battery indication function

Diode test/True RMS/LPF

 

INGCO, an international tools brand focuses on making the best tools affordable.

In the tools industry, top quality brands are too expensive. Cheap products are of low quality. INGCO has been focusing on making the best tools affordable during the past 14 years. We have become one of the quickest growing tools brands all over the world. Nowadays, consumers from more than 180 countries are enjoying our best value INGCO tools.

INGCO focuses on making the best tools affordable. We appreciate and value your business. Please don't hesitate to shoot us an email if you have any feedback, suggestion, or comment. We are 100% dedicated to your complete satisfaction.

• WIDE RANGE OF TESTS. INGCO TRMS auto ranging clamp meter meets all your needs for measuring, including AC/DC voltage, AC/DC current, resistance, capacitance, diode test, frequency, duty-cycle, temperature, etc.,
• EASY TO USE. The backlight changes to orange when volt > 80V or current > 3A with dual readings; Flashing lights help place the probes to correct position; Hold function locks data for easy reading; The orange backlight is on, and the buzzer sounds when resistance value < 30Ω; It switches off automatically without operation in 15mins
• PROFESSIONAL MULTIMETER. Automatic range turntable design and NCV non-contact measurement. The low pass filter (LPF) ensures accurate drive output measurements; LowZ (low input impedance voltage measurement) can safely troubleshoot sensitive electronic or control circuits and circuits that may contain false voltages, and can more reliably determine whether there is a voltage on the circuit
• ALL ON ONE DEVICE. 100mF large capacity. INGCO clamp meter can be used as clamp meter as well as capacitance meter. 100mF equals 100000μF. It's perfect for testing professional electrial issues, like automotive, industrial and household issues
• WORRY-FREE ORDER. INGCO focuses on making the best tools affordable. If you are not 100% satisfied with our meter, we offer you 90 days refund or replacement. If you have any problem, please contact with us by email, we will solve it for you within 24 hours.

User questions & answers

Question:	Are alligator clips available to attach to the test leads
Answer:	From my experience it helps the dark spots heal faster than normal..
Question:	during a continuity test, touching the probes together doesn't give me a audible sound. what is wrong
Answer:	It can last two to three months in my opinion depending on how light or heavy you use it. A little can go a long way
Question:	Where is this meter made
Answer:	For me it did not. I had to use a makeup remover first.
Question:	How long is the warranty
Answer:	I use the foam wash first, then small amount of oil in acne spots then lotion

Product features

INGCO Auto Ranging Digital Clamp Meter TRMS 6000 Counts

DC Current: 60A/600A ±（2.5%+5）

AC Current: 60A/600A ±（2.5%+5）

AC Voltage: 6V/60V/600V ±（0.8%+5）

DC Voltage: 600mV/6V/60V/600V±（0.5%+5）

Resistance: 600Ω/6kΩ/60kΩ/600kΩ/6MΩ/60MΩ ±（1.0%+5）

Capacitance: 10nf/100nf/1000nf/10μF/100μF/1000μF/10mf/100mf ±（4.0%+5）

Frequency:10Hz/100Hz/1000Hz/10KHz/100KHz/1000KHz±（1.0%+3）10MHz±（3.0%+3）

Duty cycle: 1%~99% ±（3.0%+3）

Temperature: -20~1000℃(-4~1832°F)