13 best voltage tester for rbas

Product description

Klein Tools Electrical Test Kit

• The MM300 multimeter measures AC/DC voltage, DC current and resistance and has a safety rating of CAT III 600V, Class 2, Double insulation
• The NCVT-1 has a bright green LED to indicate the tester is working; it changes to red and warning tones sound when voltage is detected
• NCVT-1 has a digitally-controlled ON/OFF power button and auto power-off feature to conserve and extend battery life
• Receptacle tester detects wiring configurations and indicates correct wiring, and identifies common wiring faults
• Identifies open ground, open hot, open neutral, hot/ground reversed; it does not indicate quality of ground, multiple hot wires, or a combination of defects

User questions & answers

Question:	What is the resistance measuring range
Answer:	Range is 0.200 Ohms up to 200 MegOhms, a very good range. Disregard the other answers to this same question, answers which are incorrect.
Question:	does it have a built in kick stand
Answer:	Yes, there is a built in kick stand on the back of the unit.
Question:	does it come with a case
Answer:	No, but there is a case that will work fairly well made by Klein.
Question:	Does this come with tester leads? Do you sell them separately
Answer:	Yes, this kit does include tester leads- HNS Tools

Product features

Electrical Test Kit

Klein Tools updated Electrical Test Kit contains MM300 (Manual-Ranging digital Multimeter), NCVT-1 (Non-Contact Voltage Tester) and the RT105 (Receptacle Tester). The NCVT-1 automatically detects standard voltage in cables, cords, circuit breakers, lighting fixtures, switches, outlets, and wires. The RT105 detects the most common wiring problems in standard receptacles.

• ACCURATELY MEASURES: AC/DC Voltage, DC Current (Not AC Current), Resistance, Continuity, Diodes and more.
• TROUBLESHOOTS SAFELY: Automotive and household electrical problems safely and accurately; Overload protection on all ranges
• EASE OF USE: Data hold and large digital display with backlit LCD for visibility in dimly light areas; Sampling speed: 2x per second
• 1 Year Warranty. Built-in kickstand for hands-free use. Protective rubber corner guards for drop protection
• NOTE: This meter can not test AC Current; Ensure your multimeter is set to the correct setting before testing

User questions & answers

Question:	which setting is for volts, and which is for ac
Answer:	The V with the two lines is DC volts and the line with the squiggly line is AC volts.
Question:	is the continuity test audible
Answer:	Good question. and I can't find an answer it doesn't say but in the picture when it's showing someone testing continuity it shows that it's beeping what it doesn't say that it does beat and we've got two people on here that say it does not and two people that say that it does so good luck I'm looking for one that is audible myself why all multimeters don't have an audible noise when you have continuity I will never know either that or you can have one that has a paper thin needle that jumps and you can't see it and you have to take your eyes off of what you're working on to see if you have continuity and when you move your head you lose contact and it's such a pain in the ass
Question:	Is this unit protected by a fuse? If so, is it replaceable? My last meter was fused but it was soldered. I couldn't easily replace it
Answer:	I had to replace the ammeter fuse (because I forgot to switch the hot (red) test lead from the left side to the middle, before testing my car's battery voltage). That fuse is 10A 600V. I looked around for those & couldn't find them, but found 10A 250V and these worked OK. They're 20 x 5 mm ( .2 x .79") ceramic fast-blow. https://www.amazon.com/gp/product/B07JFDTTMJ/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Question:	Can this handle being plugged into a wall socket? Also, can someone give a walkthrough of how to safely test a socket
Answer:	plug the red lead into the meter socket marked COM and the black into the center meter socket. Set the dial to V~ (for AC volts) on the 200 scale (for household current) insert one probe lead into each of the wall socket's vertical slots and move them around a bit inside the outlet slots to make sure you're getting a good connection, if in doubt plug a lamp or something into the socket. If you suspect the outlet socket itself has failed carefully remove the wall plate in order to access the actual wires connected to the outlet to be sure it's either a dead circuit or the outlet itself has failed.

Product features

AstroAI Digital Multimeter

The AstroAI AM33D Multimeter is designed to safely and accurately troubleshoot a variety of automotive and household electrical problems. It's easy and safe to operate and features many different functions for measuring current, voltage, and resistance, as well as continuity, transistor, and diode testing, which is both for automotive and household uses.

Troubleshoot Electrical Problems

AstroAI multimeter is professionally designed to troubleshoot electrical problems or just for electronics training.

Continuity Test

Connect the test leads to two points on the circuit being tested.

Intelligent Anti-burn and Dual Fuse

Double Fuse Protection, more secure and reliable; This multimeter is designed with safety in mind. Overload protection on all ranges.

Backlit LCD

Large digital display with backlit LCD for visibility in dimly light areas.

Data Hold

When taking measurements and recording results, it is often easier to use the data hold function to freeze the data being displayed on the digital display.

Low Battery Indication

You can quickly know to replace the battery and continue working. so you never accidentally run out of juice.

Open Support Stand and Protective Rubber

Built-in kickstand for hand free use. Protective rubber corner guards for drop protection.

Product description

Klein Tools NCVT-1 Voltage Tester, Non-Contact Voltage Detector for AC Voltage, Low Battery Indicator and Auto Shutdown, Batteries Included

• Voltage Tester provides non-contqact detection of voltage in cables, cords, circuit breakers, lighting fixtures, switches, outlets and wires
• Volt Pen with high intensity, bright green LED that indicates the tester is operational and aids in illuminating the workplace
• When voltage is detected, a high intensity, bright red LED illuminates and a warning tone sounds
• Discreet digitally controlled ON/OFF power button
• Auto power-off feature conserves and extends battery life

User questions & answers

Question:	Does this test through the wire insulation
Answer:	Yes. You can tell if it is an energized cord/circuit.
Question:	Why does my tester beep 6 times, flashes red then turns off
Answer:	i never noticed mine beeping and flashing but it alway's shut's down unless you hold the power button down for a few second's.
Question:	Hi what does a slow beep with a red light indicate it's not rapid. Thanks Tom
Answer:	Klein non-contact sensors are known for being misleading, by blinking red and beeping even when there is no electrical current nearby. It does blink red and beep fast (and continuously) at 110v power and is pretty good for that. The slow blinks/beeps, even when touching wood or the edge of a kitchen counter, mean nothing. Some say it's due to very low voltage or 'phantom voltage' but this doesn't always seem to be the case.
Question:	This pen tester make any sounds when it detects power
Answer:	Yes it make a sound and flash red, but make sur than the tester is on green to be sure to test 120 volt because you have two options bleu for low voltage and green for 120 volts!

Product features

Non-Contact Voltage Tester with Low Battery Indicator and Auto Shutdown

Use this Non-Contact Voltage Tester to detect standard voltage in cables, cords, circuit breakers, lighting fixtures, switches, outlets and wires. A bright green LED will tell you the tester is working and also functions as a worklight. It changes to red and warning tones sound when voltage is detected.

Product description

Safety is the number one priority on any job site. Sperry Instrument's testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. The condition of electrical installations can be established when contractors use test equipment. Any test unit that can be used to measure or review an application without coming in contact with a live conductor is a necessity. Testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. Faulty installations can be lethal; the condition of electrical installations can be established when contractors use test equipment. Sperry Instrument is pleased to offer an innovative full feature line of test equipment designed to make electrical work faster and safer. The electrical testers below accurately identify and capture circuit continuity and voltage measurements. These testers are ideal for any electrical professional or to have at home.

From the Manufacturer

Non contact sensing circuit.

• VERIFIES VOLTAGE PRESENSE: Verifies the presence of AC Voltage prior to working on electrical installation or troubleshooting (GFI6302 and VD6504)
• DURABLE: Hi-Impact Resistant ABS housing with soft over-molded rubber grips with a compact ergonomic design (GFI6302 and VD6504)
• QUICKLY READ: Bright color-coded neon lights for easy visual indication (GFI6302)
• CIRCUIT SENSING: Non-Contact sensitivity detects 50-1000V AC and patented battery self-test feature (VD6504)
• AUDIBLE AND VISIBLE INDICATOR: 360° visual and beeping audio Non-Contact Voltage Detection (VD6504)
• RATED: CAT Rating III 300V, C-UL US (GFI6302), CAT Rating III 1000V, IV 600V, (VD6504) 10 ft Drop and 250 lb Crush (GFI6302 and VD6504)

User questions & answers

Question:	The volt sensor is so sensitive it goes off near an outlet. Is that normal? I thought I could stick it in the slots to find out which side was hot
Answer:	Yes, you can insert the tip of this tool into the slots of an outlet then press the button and it will tell you which side is hot. You can also use it to test the wires in a circuit if you are unsure which is the hot lead. If the wires are connected to the switch, outlet etc touch the tip to the bared wire at the contact point and it will tell you if it is hot. You can also just touch the insulation covering the wires to get a reading too. Try to keep the wires you are testing separted by a few inches if possible, this will help prevent any false reading you might get by voltage seepage from the insulated hot lead. If you didn't know - the hot wire in a circuit is usually black, red or maybe some other dark color, the white is the neutral or return and the green is the ground. Start by testing the dark wire first but as a precaution be sure the check the white also - someone may have wired in incorrectly and that could be a hot lead. I've had - well had, until I left it someplace - one of these for years and it's a good useful tool. So I gotta get another one now, and I'm getting one of these.
Question:	Can this be used as a circuit breaker finder
Answer:	You could use them to find a circuit breaker, if you had someone to watch the tester, while you went through your panel turning off and on your breakers untill you found the one that controlled that circuit. If you didn't want to do that then you will need to buy an circuit breaker finder kit.
Question:	does this tester work on low-voltage landscape lighting wires
Answer:	The non contact voltage tester will.
Question:	can it tell the diffrence between 220v and 110v
Answer:	If you can’t tell the difference 110v and 220v .You Dont Need A Meter.

Product features

Non-Contact Voltage Tester

This unit allows the user to verify the presence of AC voltage prior to working on an electrical installation or during troubleshooting without requiring physical contact with live electrical conductors. The fully insulated probe tip eliminates the risk of contacting live electrical wires while the patented battery check feature designed into the unit ensures tester and batteries are operating properly, virtually eliminating false negative readings.

Sperry Instruments GFCI Outlet Tester

When you need a GFCI Outlet tester that's compact, provides comfort for repeated use and tests seven different wiring conditions with a press of a button, reach for the Sperry GFI6302.

Product description

Do It All, and Then Some The Etekcity MSR-R500 Digital Multimeter is a practical tool for electricians, hobbyists, and general household use. It is easy to operate and features many different functions for measuring current, voltage, and resistance, as well as continuity, transistor, and diode testing. It can be used to diagnose, assemble, and repair circuitry and wiring. Other features include a low battery indicator, continuity buzzer, and overload protection. It's tough rubber sleeve protects it from the drops and falls associated with the toughest jobs. Built for Everyday Use A Data Hold function keeps the measurements displayed on the MSR-R500 while you record them and a larger display makes the MSR-R500 multimeter even easier to read. Add in the LCD backlight and protective rubber bumper and this is the meter for every job. Specifications Safety/Compliance: IEC61010 CAT. I 600V, CAT. II 300V, double insulation ax. Display: 1999, 3 1/2 digits Range selection: Manual ranging Overload display: Display OL Sampling Speed: 3 times per second Power: 1 x 9V 6F22 Battery Included (Low Battery Indication) Diode Test: Yes Continuity Test: Yes Square Wave Output: Yes Dimensions: 5. 1" x 2. 9" x 1. 4" DC Voltage: 200mV/2000mV/20V/200V (0. 5%+2), 500V (0. 8%+2) AC Voltage: 200V/500V (2%+10) DC Current: 2000A/20mA (1%+2), 200mA (1. 2%+2), 10A (2%+5) Resistance: 200 (0. 8%+5), 2000/20K/200K (0. 8%+2), 20M (1%+5), 200M [5%(reading-10)+10] Package Includes 1 x Etekcity MSR-R500 Digital Multimeter 2 x Test Leads (pair) 1 x GP Supercell 6F22 9V Battery 1 x User's Manual

• ACCURATELY MEASURES: This multimeter can test AC/DC Voltage, DC current (Not for AC current), Resistance, Diode, Continuity and More. Sampling Speed: 3 times per second
• EASE OF USE: Data Hold button holds a reading; large backlit LCD with large digits is easily visible in dimly lit areas. Built-in support stand allows for hand free use
• SAFETY PROTECTION: The multimeter has overload protection on all ranges. Protective rubber sleeve around the multimeter adds extra drop protection
• BUY WITH CONFIDENCE: 2-Year Warranty (1-year buyer assurance and a free option to extend it by 1 more year). Feel free to contact us and we are ALWAYS READY TO HELP if you have any questions
• NOTE: This multimeter cannot be used to test AC current! Please make sure the rotary switch is located at the right range during use

User questions & answers

Question:	Does the volt meter itself ever need recharging
Answer:	You have to replace the battery at some point!Maybe soon if you leave it on!
Question:	could this measure down to say 0.1 ohms
Answer:	If you really need to measure extremely low resistances accurately, you can get a power supply that you can set for a constant current of 1A, and put it through your test load. Then put your meter in the DC millivolt range and read across the load. It will display the resistance in millohms, so a reading of 100 mV would correspond to 0.1 ohms. Few people need to measure such small resistance values, but some specialized things like coils and inductors have test specifications down in those ranges.
Question:	Help. i have a short or bad ground somewhere in my automobile, battery and alt new - i think wires going to the pcm. will this help identify? thanks
Answer:	This is called a parasitic draw and a multi step process can isolate it down to a single component. You start with checking the draw on the battery. Remove the negative terminal and set the meter to 10 AMPS with the black lead plugged into the the COM connector female on the bottom and the red plugged into 10 amp female on the far left. Clamp the black lead to the negative battery cable connector that you removed and touch the red lead to the negative terminal. If you get a reading higher than a quarter of an amp you the battery is discharging and depending on the draw it will run down over night. A tip: Make sure everything is off in the car by closing the doors and removing the bulb from courtesy engine compartment light. If the bulb is inaccessible just duct tape the switch down. Also if you entered the car to pop the hood you should wait for the computer to go back to sleep - about 20 minutes - before running the test. If there is a draw you should start isolation by pulling fuses - when you pull the right fuse the reading will drop to 1/4 amp or so. The fuse fronts a wiring harness bundle and you can see what circuits it is protecting on a schematic - first thing to check are switches on the bundle and any after market additions to the harness. Most times it will be an open switch but a poor installation of additional lights or accessories is also a high suspect spot for a short. If a switch replace it or even just open it (turn it off). If a short you need to isolate the individual circuit on the harness bundle. Short isolation is a difficult time consuming task and rather than describe it I recommend that you watch this video on YOUTUBE. It is the best I have found for going all the way to the source of a short. Second tip is to have a helper with the fuse pulling and remember that some vehicles have 2 or 3 fuse boxes. GOOD LUCK, this is time consuming but not rocket science. https://www.youtube.com/watch?v=q5zLxD74r20
Question:	Does it have a beep function to check connections
Answer:	If you're referring to the Testing for Continuity function -- yes. "The buzzer sounds if the resistance of a circuit under test is less than 70 ohms".

Product features

Do It All, and Then Some

• The Etekcity MSR-R500 Digital Multimeter is a practical tool for electricians, hobbyists, and general household use.
• The manual range dial makes it easy to select a range to measure current, voltage, and resistance-perfect whether for new electrical engineering students or pros who prefer setting the dial.
• It also comes equipped with a continuity buzzer to ensure your electrical components are still in working condition.
• Other features include a low battery indicator, overload protection, removable test lead extension caps, and a tough rubber sleeve to protect it from drops that may happen while on the job.

Hold It

Data hold function keeps measurements on the large display while you record them.

Light It Up

The display backlight makes it easy to read measurements in dark areas and at night.

Full Support

Open up the support stand to prop up the MSR-R500 and make reading measurements easier.

Always Protected

The rubber sleeve ensures that the multimeter is always protected from wear and tear while on the job.

Automotive Maintenance

Properly test fuses, wiring, and even your battery to ensure everything is in order for your next road trip.

Hobby Electronics

Test circuitry on hobby aircraft or wiring on LED strips for your next big project.

Home Electrical

Diagnose faulty wall outlets, dead batteries, and even circuit boards. on appliances to keep your home up and running.

Product description

Voltage Detector W/Led Light. The Product is Easy to Use and Easy to Handle. The Product is Highly Durable. Made In China.

• Voltage Detector W/Led Light
• The product is easy to use and easy to handle
• The product is highly durable

User questions & answers

Question:	Will this tester identify the hot and neutral conductor on a power cord
Answer:	Look here for your answer http://cadetheat.com/blog/heater-turns-on-and-off-often/
Question:	Will this work for Christmas tree lights
Answer:	This model needs a thermostat installed.
Question:	Hey I bought this like 2-3 months ago .. and it won't beep anymore when you put it up to electricity.. is there any warrenty for that
Answer:	The replacement for this is the UC072, these are available in either black (#10027)or white (#10030). If this is not being controlled with a wall thermostat, you will also need to get either a UCT1 or UCT2 built-in thermostat for the replacement.
Question:	On 110 volts how closedo you need to be? Can it follow a wire in a finished wall
Answer:	It can be wired to 120 volt or 240 volt.

• SMALL & PRACTICAL - Simple but effective little battery tester checker(BT-168) , compact size and lightweight, easy to carry
• TESTING DEFFERENT BATTERY TYPES - It works with standard and rechargeable household batteries: AA, AAA, C, D, 1. 5V, 9V and button type
• REQUIRE NO BATTERY TO OPERATE - Easy-to-read , the analog display needle moves on a color-coded, calibrated scale to quickly identify "good" (green), "low" (yellow), and "replace/recharge" (red) battery status. No batteries required. It is activated by the battery being checked
• PERFECT FOR HOME USE - Great small tool can tell you if your battery is good, low, or needs to be replaced. A must buy for anyone who uses regular or rechargeable batteries on a regular basis
• 100% MONEY BACK - Click the ADD TO CART BUTTON NOW & enjoy this household battery tester. This will keep you from wasting good batteries by throwing out good ones

User questions & answers

Question:	Will this test a cr123a and/or cr2 batteries? thank you
Answer:	A moderate load is important to check AAA, AA, C, D and 9v or any other battery for that matter. The reason is the open circuit voltage check does not indicate if the battery has the Current capability to sustain the nominal 1.5 or 9.0v under a light to moderate load for a brief 1-3 seconds. Even with a loaded test, it does not indicate the remaining Amp Hours. But a loaded test is a quick and easy light weight check and is a step better than not loaded.
Question:	which is the most accurate, the d fantatix analog or digital battery checker
Answer:	What the package says is that it tests 1.5 miniature cells and shows a photo of a button battery in the tester on the back side of the package. However, the photo shows a small button battery. It may work with a larger button - the testing area seems to be about 3/4" across, so as long as the button can be centered in that space, it might work.
Question:	I keep seeing people ask about "load" checking. Is that important? I just want to know if my batteries are still good
Answer:	warm is ok. hot is not.
Question:	Does it test button batteries, like CR
Answer:	You can user either to control the fan speed. The physical switch has + / - buttons .It is more convenience to control the fan using APP and voice .

Product features

Perfect for Home Use

Things seem to be running a bit slow? Still running slow after you replace the batteries?

Why waste time inserting and removing battery after battery when you can just test it?



Never again get caught with a dead household battery.

This handy battery tester makes it easy for you to get the most out of your batteries and lets you know when it is time to get a new one.

The analog display needle moves on a color-coded, calibrated scale to quickly identify 'good' (green), 'low' (yellow), and 'replace/recharge' (red) battery status. The BT-168 tests 9V, AA, AAA, C, D and 1.5V Button Type batteries.

Features

Testing Different Battery Types

Product description

Klein Tools ET250 is a solid-state, digital voltage and continuity tester. It measures AC/DC voltages up to 600V and tests for continuity. Additionally, the ET250 tests GFCI protected circuits to verify that the GFCI device is functioning appropriately. The tester includes a backlight and integrated flashlight for working in reduced ambient lighting conditions. Measures AC/DC voltages up to 600 volts and tests for continuity. Tests GFCI-protected circuits for performance and function. Includes backlight and flashlight for low light conditions. Features built-in test lead holders on back of meter. Integrated flashlight. 9.8 ft. (3 m) drop protection. IP53 dust and water resistant. For more than 160 years, Klein Tools has manufactured premium-quality, professional-grade hand tools that deliver the performance, durability and precision needed to get the job done right. Our family of engineers, workers and craftsman continue to put six generations of expertise into every tool we create by using only the highest quality materials, superior workmanship, and keeping manufacturing as close to home as we can. Klein isn't just the name of our company, it's also our family name. And since we're an American company that's family-owned and family-run, you know you can count on us to be here tomorrow. Klein Tools doesn't just make great products, we make great products that stand up to the demands of the professionals who use them every day ... Since 1857.

• Automatically selects voltage or continuity
• Backlit LCD display
• Cat IV 600V modern solid-state design for safety
• Tests GFCI protected circuits
• Uses standard replaceable multimeter test leads

User questions & answers

Question:	How do you to do run capacitor and resistance like waterheater element car parts ???? Please reply
Answer:	Great tool, as a manager for my apts, it's a tool you need in your bag. There is another tool you need to ck voltage, Klein, ck it out.
Question:	Can I ohm a wire out with this one
Answer:	Are the protective probe sleeves on the probes? If not removed the exposed tip is too small to make contact by just inserting the probe into a standard outlet.
Question:	Does it come with a carry bag
Answer:	CR123A and CR2 are 3-volt, tubular batteries. The meter's full scale is little more than 1.5 volts. The voltages are too high for this type of meter. Do not test these batteries.
Question:	Bought the klein et60 when put probes into a live power outlet to test it nothing happens? what am i doing wrong
Answer:	I purchased both the digital (Model BT 168D), and the analog (Model BT 168). Cheap enough and wanted to have them available in multiple locations without hunting it down each time such as basement, garage, other home. They both seemed to work until my electrical product failed. The analog showed battery still good, solid green reading. The digital read 1.3 volts for a 1.5 volt battery. I then checked against my higher quality voltmeter, which also measured 1.3 volts. Usually the analog has a red-yellow-green zone, but in this case the reading was definitely in the green zone, not even borderline. Since this happened I’ve tested on a few more batteries, and decided to throw the analog device out. Unless the battery is DEAD, the reading is misleading. In the digital era no point in wondering.

Product features

AC/DC Voltage/Continuity Tester

Klein Tools ET250 is a solid-state, digital voltage and continuity tester. It measures AC/DC voltages up to 600V and tests for continuity. Additionally, the ET250 tests GFCI protected circuits to verify that the GFCI device is functioning appropriately.

Product description

KAIWEETS 4000 Counts TRMS Auto-Ranging Digital Multimeter & Non-Contact Voltage Tester & Electrical Outlet Tester/GFCI Tester

• Function of Multimeter: Multimeter HT113B with 4000 counts Auto-ranging for precise measurement. Measures AC/DC voltage up to 600V, AC/DC current up to 10A, resistance up to 40MΩ. Can be used for continuity test, diode test, battery test. Includes 1.5V and 9V battery test modes to easily test a wide variety of batteries.
• Safety of Multimeter: Safety level: EN61010-2-030 EN61010-2-033 CAT III 600V. With a silicone protective case, it can effectively prevent the machine from falling damage. 10A fuse for overload protection. There is an anti-high voltage circuit design inside to ensure safety when using.
• Non-Contact Voltage tester: Detects standard and low voltage (12-1000V AC / 48-1000V AC). With NCV inductive probe for AC voltage; Just place the tip near a terminal strip, outlet, or supply cord. When the tip glows red and the pen beeps, you know there's voltage present. The live wire detector can automatically detect the live or neutral wire. Ideal for breakpoint Test. Handy circuit tester for electricians, homeowners.
• Outlet Tester: Detects the most common wiring problems in standard 110-125V AC outlets. Works on GFI outlets and confirms the operation of the ground fault protective device. It is easy to judge: Correct, Open Ground, Open Neutral, Live/Neutral Reverse, Live/Ground Reverse, Open Live & Live Neutral Reverse. Quick and easy to read for ultimate efficiency.
• After Sale--Combined with Amazon's excellent delivery service, we provide 36-Month after sale service, lifetime technical support. Please feel free to contact us if you have any concerns.

User questions & answers

Question:	Does it come with a carrying case
Answer:	You can check continuity if that’s what your asking.

Product description

Do you care about the safety of your home circuit?

With our home electricity security check kit, and you can check your home electricity security quickly

The kit comes with 2 powerful tools, the non-contact voltage detector and socket tester



EBTN LCD Voltage Detector

EBTN LCD display

Adjustable sensitivity

8 LED indicators in 3 colors

Distinguish live/neutral wire, breakpoint finder

AC/DC voltage, resistance, frequency, continuity test

Power: 1.5V (AAA) x 2



EBTN Screen Socket Tester

Plug Standard: US Plug

Work voltage: 2.6-3.3V

Test voltage range: 0.1-150V/40-1kHz

Rated residual operating current: 5mA

GFCI work voltage: 150V±20V

Power: 1.5V (AAA) x 2

Size: 65x65x61mm

Weight: 96g



Package Includes:

1 * Voltage Tester Pen

1 * Outlet Tester

1 * Test Leads

1 * Protect Case

1 * User Manual



Note:

The batteries are not included in the package due to Aviation Security Check

• [Home Circuit Safety Check Kit]: Come with a Non-contact Voltage Detector and a Socket Tester to meet most electric testing needs, ideal for home circuit security check, also for school, factory, office use. etc.
• [EBTN LCD Display]: BSIDE EBTN LCD display greatly enhance the reading experience, the lighted up numbers & letters with black background make it very easy to read, even in bright sunlight or poor light.
• [8 LED Indicators]: 8 LED Indicators in 3 color make it very easy to judge the detected voltage strength.
• [Sensitivity Adjustable]: Adjustable sensitivity makes measurement more convenient, when adjusting to low sensitivity, it can more accurately distinguish the specific situation in complex lines.
• [3 Results Display Socket Tester]: Super large screen can show 3 test results on the screen, the voltage value (the voltage between live wire and neutral wire & neutral wire and ground wire), analog bar, and the wiring status.

• Product Type:Tools
• Upon Detection, Tip Glows And Beeper Sounds
• Quickly Read: Bright Color-Coded Neon Lights For Easy Visual Indication (Gfi6302)
• Range 90-Volt To 1000-Volt

User questions & answers

Question:	Can this determine if a lightbulb socket has power
Answer:	I find the Fluke's build quality to be better than the Klein. If I drop the Klein, the tail cap falls off and the batteries fly out. I don't have that issue with the Fluke. Also the power button works better, my Klein's button is too sensitive. Also the Fluke I have (the 1AC model) will detect voltage in most tamper resistant receptacles without having to open the shutter, where my Klein will not (some user reported the Fluke is not sensitive but relatively my experience is the opposite). Finally, the Klein and the Southwire are made in China (although the Southwire at least has a LED flashlight built in). The Fluke is not made in China so it is easily worth twice the price to me. You can check out the Fluke and Southwire models at Lowes (and purchase there if you like one or the other). The Klein is often on sale at HD but I really recommend against it compared to the other two.
Question:	What does this one do better than a non-contact tester at 1/3 of the price
Answer:	The 2ac is the newer model with an "always on" function. It has a button that is used only to ensure that it still has battery power. The 1ac is the older one that can be turned on or off. They both test for voltage presence the same way, but the 1ac has an audible alert function which the 2ac does not have.
Question:	is this better than the klien
Answer:	The multimeter comes with a rubberized shell to protect it, but does not come with a carry case.
Question:	What is the difference between fluke 2ac and fluke 1ac-a1-ii
Answer:	Mine is voltage only. For your use a reliable DVM may be a better choice.

Product description

Klein Tools ET310 AC Circuit Breaker Finder with Integrated GFCI Outlet Tester

The Klein Tools ET310 Circuit Breaker Finder with Integrated GFCI Outlet Tester is a digital circuit breaker finder used to locate the correct circuit breaker in a panel to which an electrical outlet or fixture is connected. The Transmitter is connected to the electrical outlet or fixture in the circuit while the receiver is used to scan the breakers in the circuit panel. The Transmitter also features a GFCI outlet tester. Circuit Breaker Finder locates the correct breaker in a panel. Tester consists of two parts: a Transmitter and a Receiver. GFCI Outlet Tester integrated in receiver. Transmitter docks in the Receiver for convenient storage as a single item when tester is not is use. Transmitter incorporates a three-pin plug for connecting to North-American-style grounded electrical outlets. The transmitter may be connected to other electrical fixtures using optional accessories which are sold separately (Cat. No. 69411). Receiver powers off automatically after approximately three minutes of non-use to conserve battery life. Transmitter is powered by the circuit when connected to the electrical outlet or fixture. Low battery indicator. Easily accessible battery compartment. Uses one 9V battery in receiver only; Transmitter does not require a battery. Built to withstand a 6.6-Foot (2 m) drop. CAT II 120V safety rating. Measurement Category II is applicable to test and measuring circuits connected directly to utilization points (socket outlets and similar points) of the low-voltage MAINS installation. Includes Transmitter, Receiver, user manual, and 9V battery (for Receiver). For more than 160 years, Klein Tools has manufactured premium-quality, professional-grade hand tools that deliver the performance, durability and precision needed to get the job done right. Our family of engineers, workers and craftsman continue to put six generations of expertise into every tool we create by using only the highest quality materials, superior workmanship, and keeping manufacturing as close to home as we can. Klein isn't just the name of our company, it's also our family name. And since we're an American company that's family-owned and family-run, you know you can count on us to be here tomorrow. Klein Tools doesn't just make great products, we make great products that stand up to the demands of the professionals who use them every day ... Since 1857.



Fluke 1AC-A1-II VoltAlert Non-Contact Voltage Tester

The next generation-voltAlertAC non-contact-voltage testers from Fluke are easy to use - just touch the tip to a terminal strip, outlet, or supply cord. When the tip glows red and the unit beeps, you know-voltage is present. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits in the workplace or at home.

Simply touch the tip to a terminal strip, outlet or cord. When the tip glows red, and the unit beeps, you know there's voltage in the line. Electricians, maintenance, service, safety personnel can quickly test for energized circuits and defective grounds on the factory floor, in the shop. Continually tests its battery and its circuit integrity with a periodic double flash visual indication using fluke voltbeat technology. It comes with a two year warranty. It detects line voltage from 90vac - 600vac (1AC-AI-II).

• Product 1: This circuit breaker finder can quickly and accurately locate the correct circuit breaker in a panel corresponding to the circuit to which an electrical outlet or fixture is connected
• Product 1: Tester consists of two parts: a Transmitter, connected to the electrical outlet or fixture and a Receiver, used to scan the panel to locate the correct breaker
• Product 1: Receiver delivers clear visual and audible indications when the correct breaker has been located
• Product 1: Operates on 90-120V AC circuits
• Product 2: Voltbeat technology and continuous self-test - so you always know it is working
• Product 2: Upon detection, tip glows and beeper sounds
• Product 2: CAT IV 1000 V for added protection
• Product 2: Range 90-volt to 1000-volt

• Non-Contact Voltage Tester: The NCV sensor automatically recognizes the voltage. You just place the NCV inductive probe near to the cables, cords or outlet. Triple Volt Alert upon voltage detection: the NCV sensor changes to red and the buzzer sounds, the LCD screen display up to 8 bar graphs. In addition, the screen will be light up red or green to distinguish between live/ neutral wire.
• Adjustable Sensitivity with Dual Range: This voltage tester pen detects 12-1000V AC and 48-1000V AC. Press the “S” button to adjust sensitivity and adapt low range for doorbells, thermostats, irrigation wiring etc.
• Testing Capability of the Outlet Tester: This receptacle tester detects wiring configurations, indicates correct wiring, and identifies common wiring faults in standard and GFCI electrical outlets/receptacles, which is also with the standard 3-Wire and GFCI protected 220 Volt AC Outlets. Capable of detecting the open wiring fault with open ground, reverse polarity, open hot, open neutral, hot/neutral reversed wires.
• GFCI FUNCTION: This Electric tester tests GFCI devices by simulating ground fault conditions, It tests standard outlets (multiple outlets in kitchen or bath, and outdoor receptacles require GFCI protection). Be careful of using this function on normal receptacles. It may cause house wiring trip.
• Safety Certificate & the Kit Usage: This Electric tester Kit conforms to a safety rating of CAT III 300V, CE-Marking and Double Insulation. Lightweight and durable, which backed Limited Lifetime Service. 7/24 Customer Service. You can use the kit when you wanna know if there is a voltage in the wire and check the concrete wiring fault.

User questions & answers

Question:	Will this tester read a European style 230v single phase plug (230v on one leg) with proper adapter
Answer:	I can't answer this question, some adapters for European style plugs do not work with some of our 120v outlets, so I would reccomend you ask a electrician who has a working knowledge of the European plugs, there are electrical books that deal with these situations check your local book store or contact KAIWEETS they may have a answer. sorry I can't be more helpful.
Question:	In what condition, the outlet tester and the non contact voltage tester could be uesd together
Answer:	If you wanna know if there is a voltage in the wire and the concrete wiring fault, then you can use the kit. The receptacal tester will tell you if the hot, neutral, and ground are connected to the correct terminals on the receptacle. the non contact voltage tester only detects whether or not there is voltage in a wire.
Question:	Can I use the circuit tester of this kit to check for Short in the circuit by plugging this into outlet
Answer:	I don't believe this will help for a short. If the circuit is active/energized it will tell you the line voltage and if the plug is wired correctly and if the plug is grounded. Non-contact tester will let you know if the circuit is energized. If this does not help, hire an electrical contractor. Have a blessed day.
Question:	Does the outlet tester fall off easily? Will the three indicators cross light
Answer:	no, they are independent.

Product features

Adjustable Sensitivity with Dual Range

Low Sensitivity Mode; 12V TO 48V AC: No Beep, Green Screen.

48V TO 1000 V AC: High-frequency beep, The red tip illuminates continuously, red screen.

High Sensitivity Mode; 12V TO 48V AC: Low-frequency beep, The red tip illuminates continuously.

48V TO 1000 V AC: High-frequency beep, The red tip illuminates continuously, red screen.

Null Wire Testing

The buzzer will give a slow alarm when the end of the tester is close to the object being tested. The red indicator light flashes slowly and the LCD shows green. Indicates that the tested line is a Null Wire

Live Wire Testing

The buzzer will give a quick warning when the end of the tester is close to the object being measured. The red indicator light flashes quickly and the LCD shows red. This indicates that the line being tested is a live line.

LED flashlight

You can press and hold the “S” button for more than 2 seconds to turn the LED flashlight on/off, and then quickly use it to find problems in the circuit. The LED flashlight provides convenience in a dark environment.