12 best wireless light switches

• 【 Add Wall Light Switches without Rewiring 】 Simple installation; wired between the power and lighting fixtures; no in-wall wiring needed; expand your lighting system freely and won't affect the existing system
• 【 Detachable Wall Switch and Compact Receiver Kit 】 Mounting bracket provided; white RF remote control wall mountable switch mounts anywhere; compact receiver switch kit fits limited space like rose/canopy, electrical junction box, switch box
• 【 100 Feet RF Wireless Remote Range 】 Strong RF signal works through walls and doors without any interference; does not require line of sight while using; up to 100ft range in open areas; certified to FCC
• 【 Programmable and Expandable 】 Available to add more wall switches, receiver kits, extra handheld remotes, outlets and light sockets (Same Model Only); transmitter wall switch and receiver have been pre-programmed for immediate use
• 【 Widely Used with Multiple Appliances 】 1 Switch controls a group of lights (1000W tungsten / 600W fluorescent / 200W LED); remotely turn on/off indoor lighting fixtures, ceiling lights, plug-in pendant, lamps, hard-to-reach lights, and other electric appliances with a push of a wall switch

User questions & answers

Question:	Can it be used with 1hp, 1phase, 120v, exhaust fan
Answer:	It can be used for anything that requires power. It just replaces a on off switch. controller goes in the light/fan. Switch is battery powered. No wires......perfect.
Question:	can I use 2 seperate units in the same room and have them control 2 seperate light fixyures
Answer:	Dear Customer, Thank you for your question. This remote switch set is available in several channels. Currently all our orders are fulfilled by Amazon and these orders will arrive with random channel assignment, so we are sorry we can not send specific channels to you. If you happen to receive the 2 sets on the same codes, please feel free to contact us and we will help you. [email protected] Best wishes, Dewenwils Customer Service Team
Question:	Can I install this item in a bathroom? Instructions say no wet location. Any other models
Answer:	"Wet location" usually refers to being outdoors or above the shower if we're talking about a light fixture. As long as the exhaust fan is on when taking long hot showers, as it should be to prevent mold from building up, and the remote switch is on a wall that is not inside or directly along side the shower, then yes. The other module is buried under the light fixture in the wall or ceiling box.
Question:	Can two switches be programmed to each operate both of two lights? (i want one switch to turn on both lights, and other switch to also turn on both
Answer:	Thank you for your question. Yes, you can that. This remote switch can be paired and controlled with each other. Please feel free to contact us if you have more questions or any questions about the programming. [email protected] We will get back to you within 24 hours! Best wishes, Dewenwils Customer Service Team

Product features

Customize Your RF Remote System

Dewenwils remote control product family includes wireless light switch kit, wall switch and handheld remote control outlet / light socket sets.

These products (the same model from Dewenwils only) are programmable and can be paired with each other freely to provide more flexibility to expand your remote system.

The transmitter wall switch and receiver kit have been pre-programmed for immediate use.

CAN'T be paired with the HRS101C, HRS101A, and HRS103A products.

The Benefits of Using Dewenwils Wireless Light Switch Kit

1. Add more wall switches to the existing lamps freely; no in-wall wiring required.
2. Relocate a light switch without tearing walls or affecting the existing system.
3. Programmable wireless light switch and receiver kit allow you to remote control lights with multiple switches like a 3-way switch or 4-way switch for staircases, basements, garages, lofts, etc.
4. You can also pair more receiver kits, outlets and light sockets (The same model from Dewenwils only) to 1 wall switch and remote control a group of lights with just 1 switch.

100 FT Remote Control Range in Open Area

Strong RF signal works through walls and doors. Do not require line of sight between the remote and receiver. You can use the switch in any rooms to remote control the pairing lights.

The wireless range may be shortened by electronic devices, walls, or other physical barriers, so in actual use, the distance may be slightly less than 100 ft.

Make Your Life Easier and Comfortable

The detachable wall switch can be mounted anywhere and can be taken off and used as a portable handheld remote. Perfect for the elderly, pregnant woman and those with limited mobility or back pain; make your life convenient, safer, and energy efficient.

Get Rid of Troublesome and Unstable WIFI Control Switches

No complicated setting up needed and do not need to worry about the strength of WIFI signal.

Product description

GE Wireless Remote Wall Switch Light Control - No Wiring Needed - 1 Grounded Outlet

• Wireless control over any outlet, easily control on/off functions of lighting in hard to reach places. Great for controlling indoor lighting, lamps, small appliances and seasonal lighting.
• Decora remote light switch mounts anywhere, mounting bracket provided, no wiring needed
• Receiver plugs into any standard 120VAC household grounded outlet, controlled device plugs into receiver. Remote operation up to 100 feet from plug-in receiver
• CFL, LED and incandescent compatible
• Manufactured in various codes A, B, C, and D; allows the use of multiple units without interference from other modules. NOTE: Please refer to the User Manual before use. This item comes in different frequencies

• Wireless control over any outlet, easily control on/off functions of Lighting in hard to reach places
• CFL, LED and incandescent compatible. Amperage is 12(amps)
• Decora remote light switch mounts anywhere, mounting bracket provided, no wiring needed
• Great for controlling indoor Lighting, lamps, small appliances and seasonal lighting
• Receiver plugs into any standard 120VAC household grounded outlet, controlled device plugs into receiver
• Remote operation up to 100 feet from plug in receiver
• Manufactured in various codes A, B, C, and D; allows the use of multiple units without interference from other modules
• Note: Please refer to the user manual before use; This item comes in different frequencies; If you are using more than one switch and they are the same frequency code (A, B, C, D) then the switches will control each other; For individual control, make sure that the frequency code of each switch is not the same

User questions & answers

Question:	Does one switch control two (or more) receivers
Answer:	On the back of the unit is a letter, i.e. “A”, “B” etc. If you have two receivers with the same code, the switch will control both outlets.
Question:	Can you desginate what frequency you want to order? I have 2 and I need 1 more with a different frequency
Answer:	You cannot change the frequency.
Question:	Does the outlet receiver cover both plugs or can I plug it into one to control that and still use the other plug to plug something else in
Answer:	Can I get two units and plug one each into the same outlet (one on top, one on the bottom) or do they need to be plugged into separate locations?
Question:	Is the frequency a,b,c,d ??? should have a small label on back of package. i need a b,cor d. thanks- al bartkowski
Answer:	Small label is on back. But you get what they decide to send. IOW you can’t order a B orD apparently. I have another manufacturer product and it doesn’t even have a frequency label.

Product features

GE Wireless Remote Wall Switch Control

Enjoy wireless control over lighting devices with this easy-to-control wireless remote wall switch.

Turn devices ON/OFF in hard to reach places with the remote switch, no wiring needed.

GE Wireless Remote Wall Switch Control

Enjoy wireless control over lighting devices with this easy-to-control wireless remote wall switch.

Turn devices ON/OFF in hard to reach places with the remote switch, no wiring needed.

GE Wireless Remote Wall Switch Control

Enjoy wireless control over lighting devices with this easy-to-control wireless remote wall switch.

Turn devices ON/OFF in hard to reach places with the remote switch, no wiring needed.

1 Grounded Outlet

The receiver has 1 side-access grounded outlet and plugs into any standard household outlet for tool-free installation.

100ft. Signal Range

The 100ft. signal range easily connects to the receiver and makes lighting control ideal for multiple areas in your home.

For LED, CFL & Incandescent

The lighting control receiver is compatible with LED, CFL and incandescent bulbs. Plug in any lighting device with these bulbs.

Wireless Wall Switch Versatility and Uses

With wireless lighting, you can automatically turn on your lights with a convenient switch. Automate your lighting at home with easy-to-control operations, conserving time and energy.

Compatible with LED, CFL and incandescent lights, this wireless lighting control supports a wide range of lighting.

This lighting control switch is perfect for plug-in lamps, indoor seasonal lighting, small appliances and more, rated for 120VAC/12A and UL Listed.

Remote Instructions

Open the battery compartment or the transmitter and remove the battery saver insert.

You can now control your device remotely using the remote transmitter. A light on the receiver turns on when the unit is activated remotely, indicating that power is being supplied to the lamp or device.

How To Use

1. Plug receiver into a standard indoor outlet.
2. Plug device to be controlled into the outlet on the receiver.
3. Make sure outlet supplying receiver is powered.
4. Make sure lamp or device is turned ON.
5. Use remote to turn lighting device ON/OFF.

• ▶【Easy to Install】- Simply install the receiver between the devices to be controlled and the power supply. You can switch your lights on and off from anywhere via the remote control panel. Expand your lighting system freely but not affect the existing system.
• ▶【Safety and Strong Signal】- IP54 waterproof, thus use safely even in damp places. The effective distance between the receiver and the control panel is up to 328ft indoors and 1969ft outdoors. Strong signal through the walls and remote control your bulbs, halogen lamps, fluorescent lamps, CFLs, LED lights, fans and other electrical switchboards, etc. max. Integrated power: 1000W.
• ▶【Multi-Matching and Penetration】- One Thinkbee Wireless receiver can hold up to 8 control panels. Ideal to control your garden shed, garage and exterior lighting comfortably from home!
• ▶【Various Occasions Available】- Small receiver fits easily in control boxes such as canopy, distribution box, electrical box. Ideal for use in offices, hotels, restaurants, factories, etc. Working temperature: -25℃ ~+65 ℃.
• ▶【Long Life and Warranty】- CE, FCC, RoHS, CQC Certified. 600,000 times for Switch Button, 400,000 times for the receiver and 6 ~ 8 years for lithium battery of button. Self-tape provided for installation. Offer no-hassle 12-month warranty and friendly 24-hour customer service.

User questions & answers

Question:	can this be set up as a momentary switch
Answer:	A momentary switch is like a doorbell switch, when you let go it stops ringing.
Question:	can I get 3 swtiches and 1 receiver to control 1 llight
Answer:	Yes. We have added a new single wireless switch without the receiver for more flexible installation choices. Here is the link: https://www.amazon.com/dp/B087443H8K KINDLY NOTE: This wireless switch needs to work with Thinkbee remote receiver to control lights on/off. Extra switch for B0814QBJJ8/ B0814R5PSX/ B0814QT8QP/ B07T23NCXP/ B07SYHJZ42/ B07QTJFNK5/ B07QNZMFM2. Hope it can help you!
Question:	actual distance. how many walls can the signal pass
Answer:	in a 2000sqf house will work fine from any spot no matter the walls ,this is very good
Question:	The receiver has an antenna and a tab for a screw, so is it meant to be located outside of a junction box? Is that electrical code-legal
Answer:	No it goes inside the box and it does not have to be screwed to anything just make sure to follow instructions and program both remotes before putting it inside the box

Product features

5 minutes fast installation and pairing:

Simply install the receiver between the devices to be controlled and the power supply. Then two easy steps to pair:

1. Press the function button of receiver for 2 seconds (the indicator light blinks in red). Then release the function key. Now the controller is ready to pair.

2. Press the switch panel to pair, lights ON/OFF indicating the pairing was succeeded.

Warm Tips:

1. The receiver requires both the live and neutral wires for power.

2. Please ensure the input and output, live and neutral wires are connected correctly.

For better experience, you can also search "How to install Thinkbee Mini Wireless Switch Set?" on youtube. Watch videos for more detail of installation at your convenience! When the pairing is unsuccessful or the indicator is not working properly, please try to re-pair again.

Wireless Multi-way Switch

You can use it as 3-way or multi-way switch to control the light from 2 or more locations. One receiver can hold up to 8 control switch panels.

Outdoors 1969ft and Indoors 328ft

433MHz Strong RF signal works through walls and doors. You can use the switch in any room to remote control the pairing lights.

Make Your Life Easier and Comfortable

The switch can be placed or mounted anywhere. Make your life convenient, safer, and energy efficient.

• 【 Wireless Switch and Outlet 】 Remotely turn on/off indoor lighting fixtures, plug-in pendant, lamps, hard-to-reach lights, and other electric appliances with a push of a wall switch; 2 wall switches are perfect for staircases, basements, garages, and lofts
• 【 Detachable Wall Mounted Switch 】 No in-wall wiring needed; mounting bracket provided; simple installation; white wall mountable switch fits any room decor easily; detachable remote switches can also work as handheld remotes
• 【 New Compact Design Outlet】 Leaves the upper wall socket available; smaller than most of the other indoor remote control outlets; wireless switch receiver kit can also be turned on and off manually
• 【 Programmable and Expandable 】 Available to add extra handheld remotes, outlets and light sockets (Same Model Only); transmitter and receiver have been pre-programmed for immediate use
• 【 100 ft RF range 】 Strong RF signal works through walls and doors without any interference; does not require line of sight while using; up to 100ft range in open areas; ETL certified and FCC approved

User questions & answers

Question:	Do you have 3 switches and 1 receiver
Answer:	Thank you for your question. We are sorry we don't have 3 switches and 1 receiver set, but we offer separate wall switch, www.amazon.com/dp/B07MGN8LXT You can pair it with the receiver after programming. Please let us know if you have more questions. [email protected] Best wishes, Dewenwils Customer Service Team
Question:	I know there are other wireless switches for this, but can this one be used for a garbage disposal (as long as under 1200 watts
Answer:	Thank you for your question. Yes, it can be used for garbage disposal. Please be noted the max. power rating of this remote outlet set is 1/2 HP. Please check the HP of devices like the vacuum, dust collector, garbage disposer, pump... and make sure the output doesn't exceed 1/2 HP. Let us know if you have more questions. [email protected] Best wishes, Dewenwils Customer Service Team
Question:	Could I plug a power strip into this to control a few lights in the room
Answer:	Hello , yes you ca plug a power strip into this to control a few lights, please attention the Max Power Rating: 10A / 1200W.
Question:	Am I able to purchase multiple quantities of this product and program them separately for multiple rooms in my house? Confused on the frequency aspect
Answer:	Frequency is 433.92MHz, input voltage is 120VAC 60HZ, max.load power: 10A, 1200W, transmission frequency is 100 ft, transmitter battery 12V (23A) 1 pc. Hope this answers the question

Product features

Dewenwils 2 Wireless Wall Switches and 1 Outlet Set

Specifications:

• Input Voltage: 125VAC, 60Hz
• Max Power Rating: 10A / 1200W
• Remote Battery: 23A, 12V
• Transmission Frequency: 433.92MHZ
• Remote Control Distance: 100 Feet (Free Area)

Packing List:

• 1x 3 Prong AC Grounded Outlet
• 2x Wireless Remote Wall Switches
• 1x Battery (Installed)

Dewenwils Remote Control Switch Kits Series

Customize Your RF Remote System

Dewenwils remote control product family includes wireless light switch kit, wall switch and handheld remote control outlet / light socket sets.

These products (the same model from Dewenwils only) are programmable and can be paired with each other freely to provide more flexibility to expand your remote system.

The transmitter wall switch and receiver kit have been pre-programmed for immediate use.

CAN'T be paired with the HRS101C, HRS101A, and HRS103A products.

Wall Mounted Switches Wireless Remote Control Outlet Set

Simplify your life by remotely controlling indoor lighting or household appliances with this wall mountable remote controller outlet set.

No wiring required; No pre-programming required; Easy to install and convenient for home/office use;

Perfect for plug-in pendants, lamps, ceiling lighting, hard to reach switches, Christmas tree, holiday decoration, fan, and other electrical devices.

No More Bulky Remote Outlet Plugs

New design compact size wireless remote control electrical outlet switch in minimalist design style takes up 1 wall outlet only and fits for any room decor easily.

100 FT Remote Control Range in Open Area

Strong RF signal works through walls and doors.

Do not require line of sight between the remote and receiver.

The wireless range may be shortened by electronic devices, walls, or other physical barriers, so in actual use, the distance may be slightly less than 100ft.

Control the lights by 2 wall switches from different rooms or floors.

Note:

Keep in mind this switch is turning the power on/off, not fit for devices with electronic switch.

Make Your Life Easier and Comfortable

The detachable wall switch can be mounted anywhere and can be taken off and used as a portable handheld remote. Perfect for the elderly, pregnant woman and those with limited mobility or back pain; make your life convenient, safer, and energy efficient.

Get Rid of Troublesome and Unstable WIFI Control Switches

No complicated setting up needed and do not need to worry about the strength of WIFI signal.

• 【 Wireless Wall Switch 】 Add wall light switches easily without rewiring; mounting bracket included; simple installation; wall mounted wireless on/off switch fits any room decor easily; detachable remote switch provides more flexibility; ETL and FCC certified
• 【 100FT RF Wireless Remote Range 】 Strong RF signal works through walls and doors without any interference; up to 100ft range in open areas; does not require line of sight between the remote controller and outlet plug with the individual ON/OFF button
• 【 15A/1875W Heavy Duty High Power 】 Up to 15A/1875 watt, 1/3HP high power rating; works with most of household appliances; ideal for indoor lighting fixtures, Christmas tree lights, lamps, fans, hard-to-reach outlets, and other electrical devices
• 【 Programmable and Expandable 】 The remote controller and receiver have been pre-programmed for immediate use, but you can freely add extra Dewenwils remotes, plugs, and light sockets (Same Model Only) to expand your remote system or customize the combinations
• 【 Compact Size & Side Outlet 】 Takes up 1 wall outlet socket only; smaller than most of other indoor remote control outlets; handy side plug receiver fits easily in tight spaces and behind furniture; ETL certified and FCC approved

Product features

Dewenwils Remote Wall Switch and Plug-In Receiver, Indoor Wireless Remote Controlled Outlet Switch Set, White

Simplify your life by remotely controlling indoor lighting or household appliances with a wall mountable remote controller.

The wireless receiver kit can also be turned on and off manually.

Perfect for plug-in pendant, lamps, ceiling lighting, hard to reach switches, Christmas tree, holiday decoration, fan, and other electrical devices.

Specifications

• Input Voltage: 125VAC 60HZ
• Max. Current: 15A Resistive; 5A Tungsten Lamp; 1/3 HP
• Max. Load Power: 1875W
• Transmission Frequency: 433.92MHZ
• Remote Battery: 23A, 12V
• Remote Control Range : 100 Feet (Free Area)

3 Prong Space Saving Side Outlet Plug

Plugging electrical devices in from the side, receiver fits easily in tight spaces or behind furniture.

Allows furniture to be pushed against the wall; ideal for tight spaces behind TV bracket, sofa, nightstand, and headboard.

Small size takes up 1 lower wall socket.

Customize Your RF Remote System

Allow you to add extra handheld remotes, outlets and light sockets (The same model from Dewenwils only).

Provide more flexibility to expand your remote system freely.

Note:

Please remove the battery insulation from the wall switch before using.

Note

Keep in mind this switch is turning the power on/off, not fit for devices with electronic switch.

If your device won't automatically power on again when you unplug it and plug it back in, it won't work with this (or any other) power control switch.

100 FT Remote Control Range in Open Area

Strong RF signal works through walls and doors.

Do not require line of sight between the remote and plug in receiver.

The wireless range may be shortened by electronic devices, walls, or other physical barriers, so in actual use, the distance maybe slightly less than 100ft.

Make Your Life Easier and Comfortable

Perfect for the elderly, pregnant woman and those with limited mobility or back pain;

Make your life convenient, safer, and energy efficient.

Get Rid of Troublesome and Unstable WIFI Control Switches

No complicated setting up needed and do not need to worry about the strength of WIFI signal.

• ▶【Easy to Install】- Simply install the receiver between the devices to be controlled and the power supply. You can switch your lights on and off from anywhere via the remote control panel. Expand your lighting system freely but not affect the existing system.
• ▶【Strong Signal】- IP54 waterproof, thus use safely even in damp places. The effective distance between the receiver and the control panel is up to 328ft indoors and 1969ft outdoors. Strong signal through the walls and remote control your bulbs, halogen lamps, fluorescent lamps, CFLs, LED lights, fans and other electrical switchboards, etc. max. Integrated power: 1000W.
• ▶【Dual Switch】- With the multi-switch function you can control 1 device with 2 independent switches. You could use one switch to replace the existing switch and the other as a remote control switch or three way switch. One Thinkbee Wireless receiver can hold up to 8 control panels. Ideal to control your garden shed, garage and exterior lighting comfortably from home!
• ▶【Various Occasions Available】- Small receiver fits easily in control boxes such as canopy, distribution box, electrical box. Ideal for use in offices, hotels, restaurants, factories, etc. Working temperature: -25℃ ~ 65 ℃.
• ▶【Long Life and Warranty】- CE, FCC, RoHS, CQC Certified. 600,000 times for Switch Button, 400,000 times for the receiver and 6 ~ 8 years for lithium battery of button. Self-tape provided for installation. Offer no-hassle 12-month warranty and friendly 24-hour customer service.

User questions & answers

Question:	Can i use this to energize a swamp cooler, the starting watt would be about 1500, but settle in about 700watts (induction 1hp psc motor) and one 60 wa
Answer:	It's rated at 1000 watts max
Question:	Is this ul certified? my insurance won't cover non ul certified electronics
Answer:	There is no indication that these devices are UL certified.
Question:	Is there any led indication on the switch if the receiver is on / off state ? this is also necessary if 2 switches connected to the same receiver
Answer:	The LED will light up only when pressed. There is not an on/off position or anything else that would indicate which state a switch is in. However, the control is binary, so if the controlled fixture is in the opposite state from the state desired, pressing the button on either switch will alter the fixture's state.
Question:	I think i got a lemon. receiver red light never comes on. remote control blue light never stays on at the end of programming. better instruction
Answer:	As for your confusion, please make sure that your wiring is correct. Here is the video for using the mini wireless switch on youtube: https://www.youtube.com/watch?v=K16t2gB_m_A Hope it can help you! If you have any other questions, please feel free to contact us and we will offer you the best customer services wholeheartedly. Here is our email: [email protected]

• 【 Wireless Remote Control 】Remotely turn on/off indoor lighting fixtures, plug-in pendant, lamps, hard-to-reach lights, and other electric appliances with a push of a wall switch
• 【 Detachable Wall Mounted Switch 】No in-wall wiring needed; mounting bracket provided; simple installation; white wall mountable switch fits any room decor easily; detachable remote provides more flexibility
• 【 New Compact Design 】 Leaves the upper outlet available; smaller than most of the other indoor remote control outlets; wireless switch receiver kit can also be turned on and off manually
• 【 Programmable and Expandable 】 Available to add extra handheld remotes, outlets and light sockets (Same Model Only); transmitter and receiver have been pre-programmed for immediate use
• 【 100 ft RF range 】Strong RF signal works through walls and doors without any interference; up to 100ft range in open areas; ETL certified and FCC approved

User questions & answers

Question:	Does the wall mountable switch have a light that indicates the plug is hot
Answer:	Thank you for your question. The wall switch doesn't have any light indicator. The outlet has a power indicator. Let us know if you have more questions. [email protected] Best wishes, Dewenwils Customer Service Team
Question:	does this device need line of sight with the swich to be functional or can it work like behind furniture
Answer:	Thank you for your question. The strong RF signal can work through walls and doors. Do not require line of sight between the remote and receiver. The wireless range may be shortened by electronic devices, walls, or other physical barriers, so in actual use, the distance may be less than 100 ft. Please contact us if you have more questions. [email protected] Best wishes, Dewenwils Customer Service Team
Question:	Can I connect two lamps to a single outlet
Answer:	Thank you for your question. The max power rating of this remote outlet is 10A / 1200W. Please make sure the total power rating of the 2 lamps doesn't exceed the 10A/1200W. Please contact us at [email protected] and we will help you! Best wishes, Dewenwils Customer Service Team
Question:	Can I take it apart and use the rocker switch in a gang box
Answer:	Thank you for your question. Unfortunately, it can't be put into a gang box. Let us know if you have more questions. [email protected] Best wishes, Dewenwils Customer Service Team

Product features

Dewenwils New Design Wall Mounted Switch and Plug-In Receiver Indoor Wireless Remote Controlled Outlet Set, White

Customize Your RF Remote System

Programmable & Expandable

Allow you to add extra handheld remotes, outlets and light sockets (The same model from Dewenwils only).

Provide more flexibility to expand your remote system freely.

Wall Mounted Switch Wireless Remote Control Outlet Set

Simplify your life by remotely controlling indoor lighting or household appliances with a wall mountable remote controller.

No wiring required; No pre-programming required; Easy to install and convenient for home/office use;

Perfect for plug-in pendants, lamps, ceiling lighting, hard to reach switches, Christmas tree, holiday decoration, fan, and other electrical devices.

No More Bulky Remote Outlet Plugs

New design compact size wireless remote control electrical outlet switch in minimalist design style takes up 1 wall outlet only and fits for any room decor easily.

100 FT Remote Control Range in Open Area

Strong RF signal works through walls and doors. Do not require line of sight between the remote and receiver. The wireless range may be shortened by electronic devices, walls, or other physical barriers, so in actual use, the distance may be slightly less than 100 ft.

Note:

Keep in mind this switch is turning the power on/off, not fit for devices with electronic switch.

Make Your Life Easier and Comfortable

Perfect for the elderly, pregnant woman and those with limited mobility or back pain; make your life convenient, safer, and energy efficient.

The wireless receiver kit can also be turned on/off manually.

Get Rid of Troublesome and Unstable WIFI Control Switches No complicated setting up needed and do not need to worry about the strength of WIFI signal.

• 【 Remote Light Switch Kit 】Remotely turn on/off ceiling lights, plug-in pendant, standing floor lamps, table top lamps, bedside and hard-to-reach lights with a push of a wall switch
• 【 Detachable Wall Mounted Switch 】No in-wall wiring needed; mounting bracket provided; simple installation; white wall mountable switch fits any room decor easily; detachable remote provides more flexibility
• 【 80 FT Long Range 】Strong RF signal works through walls and doors without any interference; remote control lamps for bedroom, living room, basement and do not need to be in the line of sight
• 【 Programmable and Expandable 】Available to add extra handheld remotes, outlets and light sockets (Same Model Only); transmitter and receiver have been pre-programmed for immediate use
• 【 Led CFL Incandescent Bulb Compatible 】LED/CFL ≤ 20W; Incandescent bulb ≤ 60W; standard medium E26/E27 base; high temperature and electricity resistance PBT material; ETL certified and FCC approved; 1-year warranty

User questions & answers

Question:	Can this bhd9829u base be paired with the hrs101d-r keyfob remote
Answer:	Thank you for your question. No, it can't be paired with hrs101d-r keyfob remote. It can be paired with this handheld remote, www.amazon.com/gp/product/B07M5DWZVP Please let us know if you have more questions. [email protected] We will get back to you within 24 hours. Best wishes, Dewenwils Customer Service Team
Question:	Dows this need to be reprogrammed after a power outage
Answer:	Thank you for your question. No, it doesn't need to be re-programmed after a power outage. Usually, you only need to re-program it when you want to add more remotes or light sockets to the system. Please let us know if you have more questions. [email protected] Best wishes, Dewenwils Customer Service Team
Question:	can i connect two sockets with one wall switch ? Can i purchase a second socket to do this
Answer:	Thank you for your question. Yes, the wall switch can control multiple sockets after programming. Here is the link of the light socket, www.amazon.com/dp/B07MGN85D9 Let us know if you have more questions. [email protected] Best wishes, Dewenwils Customer Service Team
Question:	Why is the max load for led 20w but incandescent is 60w? leds are much more efficient and produce less heat. seems like it should be the other way
Answer:	Because the load of led will not beyond 20W while incandescent light will not beyond 60W, both of them could be used in this light socket.

Product features

Dewenwils Wireless Wall Switch Remote Control E26 E27 Light Lamp Bulb Socket, No Wiring Needed

Dewenwils Remote Control Switch Kits Series

Customize Your RF Remote System

Dewenwils remote control product family includes wireless light switch kit, wall switch and handheld remote control outlet / light socket sets.

These products (the same model from Dewenwils only) are programmable and can be paired with each other freely to provide more flexibility to expand your remote system.

The transmitter wall switch and receiver kit have been pre-programmed for immediate use.

CAN'T be paired with the HRS101C, HRS101A, and HRS103A products.

Wall Mounted Switch Remote Control Light Socket

Simplify your life by remotely controlling lighting fixtures with a wall mountable remote controller. Each light bulb socket has a manual switch and can also be turned on/off manually.

1. No wiring required;
2. No pre-programming required;
3. Easy to install and convenient for home/office use

The socket adds approximately 2.28” in height or length.

Please measure the size carefully before you buy if you want to use it under lampshade or in tight space.

80ft Remote Control Range

Strong radio frequency transmission can work through walls and doors to control lamp as far as 80’ in the open area. The wireless range may be shortened by other electronic devices, appliances, walls, or other physical barriers, so in actual use, the distance may be slightly less than 80 feet.

Do not need to be in the line of sight for remote to work by individual ON/OFF button.

Note:

Use in dry environment;

For indoor use or under shelter if use outside;

Not for use in totally-enclosed luminaires.

Make Your Life Easier and Comfortable

The detachable wall switch can be mounted anywhere and can be taken off and used as a portable handheld remote. Perfect for the elderly, pregnant woman and those with limited mobility or back pain; make your life convenient, safer, and energy efficient.

Get Rid of Troublesome and Unstable WIFI Control Switches / Light Bulbs

No complicated setting up needed and do not need to worry about the strength of WIFI signal.

• ✓ READY-TO-GO: Each BN-LINK Wireless Remote Control Outlet kit contains everything you need to start (even the remote batteries!). Simply plug and play, or sync up the outlets to suit your needs.
• ✓ STRONG SIGNAL: Our RF receivers and transmitters work through doors and walls without interfering with other electronics. Signal can function as far as 100 ft in line of sight.
• ✓ FLEXIBILITY: With the option to pair multiple BN-Link remote outlets together, you can expand your system and make the appliances in your home all accessible in just the palm of your hands!
• ✓ SIMPLE CONVENIENCE: Use the remote or the outlets themselves to turn your appliances on and off. Great with almost any electronic device, including lights, air conditioners, heaters, audio sound systems, holiday decorations, and charging devices.
• ✓ SAFE AND RELIABLE: Outlets will remain off after a power outage to save energy and protect your appliances. Ratings: 120V, 10A, 1200W (NOT COMPATIBLE WITH SHOP VACS)

User questions & answers

Question:	since it is a 120v appliance, can it be used in new zealand whereof the voltage is 230v
Answer:	no, this product is rated for USA voltage only
Question:	Sirvepara 220 v
Answer:	No, it is not compatible with 220v
Question:	Can I have the remote turn on two outlets with a single click (not lamp 1 and then lamp
Answer:	YES! To do this, you will need to first RESET the outlets, and then program them to a single remote button. To reset, unplug the two outlets in questions from power. Press and hold the Learning button on the outlet, and then plug in the outlet and wait for the light to stop blinking. Then press and hold the Learning button again until the light flashes again, and press the desired button on your remote (say, remote button #1) to sync the outlet and remote together. Do this same process to your second outlet. Now when you press the #1 button on your remote, both outlets will turn on with a single click!
Question:	If you buy two sets of the 3 oulets, will they interfere with each others frequency and operate both sets of #1, #2, #3 etc
Answer:	My experience with similar products is: If you buy several, the remotes will work on each. In other words they have the same frequency. I expect these are the same. So, if you buy 100 of these sets, you won't get 300 frequencies. You will get the same 3 frequencies 100 times. I found that worked well for my uses.

Product features

BN-LINK Wireless Remote Control Electrical Outlet Switch for Household Appliance

Link your everyday appliances to our handy remote control outlets. Each pack contains everything you'll need to set-up your home, room, or office, including:

The Easiest and Fastest Way to Go 'Smart'

Simply plug and play. No need for WIFI connection, smartphone, or smarthome device. Great with almost any electronic device, including lights, air conditioners, heaters, audio sound systems, holiday decorations, and charging devices.

100 Feet Wireless Range

Powerful RF signal can find outlets through doors and walls without interfering with Wi-Fi or cell phone frequencies. Signal can function as far as 100 ft in line of sight.

Made For Everyone

With a touch of a button, you can light up a dark basement, start a fan, turn off a bedside lamp. Outlets are fully re-programmable and customizable, meaning you can sync multiple outlets to one remote button, or buy multiple packs and sync them to multiple remotes to hand out to your family. Control the house without walking around.

Save Money With BN-LINK Indoor Remote Outlets

Many household electronics use up electricity whether or not they are off. You can now choose BN-LINK remote outlets to help you reduce your electricity energy. Turning off the power using the remote control is the cheapest way to reduce your electricity bill.

Product description

Light It! By Fulcrum, Remote Control LED Lights, Wireless, 3 Piece Set

• Remote Control Lights – Operates conveniently by remote switch allowing you to control your lighting wirelessly from up to 60ft away, even through walls
• Install Anywhere – Wireless lighting installs anywhere you need it without plugs, wires or tools
• Programmable and Expandable – Install and control up top 20 sets of lights from one remote creating your perfect lighting system
• LED Floodlight Technology – Creates ultra-bright, glare resistant, wide-beam lighting anywhere you need it
• Variable Dimmer – Allows you to select the perfect lighting level wherever you need it

User questions & answers

Question:	Will this model and the older model (30020-308) work off the same remote
Answer:	Yes. I added lights to my vanity mirror and it was cheaper with the remote. I didn't need the new, but, noticed that the old lights worked with the new light off the old remote. I tried the new remote and everything worked as well.
Question:	what type of battery do they take? standard ones you can buy at any drug store or needs to be specialty store
Answer:	Normal AA batteries
Question:	Would this work in a small bathroom with moisture from the shower
Answer:	I think it would work ok as long as it was not in water
Question:	How long do the batteries last? Is battery life good? Thanks
Answer:	i use these lights every night for two hours...I need to change the batteries every month.

Product features

Tech Specs

Color: White.

Item Weight: 10.6oz.

Batteries: 3 C Batteries Required.

Watts: 5 Watts.

Bulb: LED.

Programmable LED Lighting System

No wires, no plugs, no tools. The remote-control lighting system can be used anywhere extra light is needed with no electrical work required.

Perfect For Use In:

Product description

Control your lights, ceiling fans, and other fixtures from anywhere with the Kasa Smart Wi-Fi Light Switch. The smart switch replaces any standard light switch, and connects to your home Wi-Fi in no time through the free Kasa app. Kasa also lets you manage connected fixtures with your smartphone or tablet, including setting schedules, timers and countdowns. For added convenience, you can use your voice to control when paired with Amazon Alexa, Google assistant and Microsoft Cortana. Protocols supported: IEEE 802.11b/g/n; System requirement: Android 4.1 or higher iOS 9.0 or higher; Wireless type: 2.4GHz 1T1R.

• Easy guided install: Neutral wire is required, standard wall plate size. No need to understand complex switch wiring or master vs auxiliary switch configurations; The Kasa app guides you through easy step by step installation. Need 2.4GHz Wi-Fi connection
• Control from anywhere: Monitor your light status. Turn electronics on and off from anywhere with your smartphone using the Kasa app, whether you are at home, in the office or on vacation
• Voice control: Enjoy the hands-free convenience of controlling the lights in your home with your voice via Amazon Alexa or Google Assistant; perfect for times when your hands are full or entering a dark room
• Scheduling: Use timer or countdown schedules to set your smart switch to automatically turn on and off while you're home or away. Enable ‘away mode’ to randomly switch on and off to trick potential intruders
• Trusted and reliable: Designed and developed in silicon valley, Kasa is trusted by over 4 million users. UL certified for safety use. 2-year warranty

Product features

Set Schedules

Automate your connected fixtures to follow your daily schedule and preferences.

Voice Control

Use simple voice commands to control your switch with Alexa or Google Assistant.

Control from Anywhere

Control your lights, ceiling fans, and other fixtures from anywhere via the Kasa Smart app.

Product description

The Westek Indoor Wireless Wall Outlet Switch is an easy, convenient way to add switched outlet convenience to your home, allowing you to remotely operate and control indoor devices at the touch of a button. The wireless signal can pass through walls, doors, ceilings, floors and even around corners at a distance of 100 feet. This item is designed with you in mind, so that you can turn on your hard-to-reach lamp in the corner of the room from the comfort of your sofa, chair or even in another room. If you don’t have a light switch at the entry of a room in your home, no problem. Simply mount the switch onto your wall and you can turn on a lamp or plug-in light fixture at the touch of a button. No more fumbling around in the dark. It’s also great for persons with mobility issues and allows you to turn off appliances easier, saving energy consumption and money. And it’s super easy to install. Simply plug the desired appliance or lamp into the receiver and the receiver into any outlet. Use the switch to turn the device on and off. Simple. No wires and no need to call an electrician. Even better, it is discrete so you won’t even know it’s there. You can remove the appliance from the device at your convenience, or you might like it so much that you need to buy a second one. The transmitter is designed to look like an actual switch and switch plate and it will mount to any surface using the enclosed screws. A press of the transmitter's switch turns whatever you plugged into the receiver on or off - just like a hand wired switch and outlet! Once you have this item in your life, you’ll wonder how you ever lived without it.

From the Manufacturer

Due to continuing product development, the product you receive may look slightly different than the one displayed. The easy way to add switched outlet convenience without any wiring or the need for an electrician. The invisible wireless RF signal travels for a conveniently placed transmitter to a receiver located by the device you want to operate. A press of the transmitter turns on and off whatever light, TV or small appliance you have plugged into the receiver. The AmerTac Wall Mounted Switch and Plug-in Receiver adds convenience and looks like a light switch.

Note: Available in Channel D, E or F,Random channels will be sent.

• CONVENIENTLY CONTROL LIGHTING – This wireless outlet switch allows you to remotely operate and control indoor devices at the touch of a button. Ideal for hard to reach lamps and seasonal lighting
• AT-HOME CONVENIENCE – The wireless wall switch transmitter has a Radio Frequency signal that works up to 100 feet away, around corners and through walls to make your life easier. Saves energy consumption and money
• EASY INSTALL – Simply plug the desired appliance or lamp into the receiver and then plug into the outlet. Use the switch to turn the device on and off, no need to use an electrician
• DESIGNED WITH YOU IN MIND – Control your lamps and appliances from the comfort of your bed, chair or sofa. No need to get up if you don’t want to, perfect for hard-to-reach appliances
• DISCREET AND PORTABLE – Small and unnoticeable, you probably won’t know it’s there. Wall switch mounting screws are included if desired

User questions & answers

Question:	The receiver looks kinda big. Does it hinder access to one of the outlets in the typical 2-outlet box
Answer:	The switch is independent of any box. The receiver part plugs into an outlet & is a little large. However, if plugged into the upper socket of a 2-outlet box, most of it sticks above the box and does not block the lower socket. One point I must make is that the outlet on the receiver is only for a 2-prong plug and has no ground. I had to use a 3-prong adapter to plug in a grounded plug and ground the adapter to the outlet box.
Question:	How deep is the remote? Do I have to cut a whole in the wall and install a box as well
Answer:	It's about 16 mm thick, not counting the switch lever. No need to cut into the wall to install anything. At most, may have to drill a couple screw holes in the wall, but most just affix with provided double-sided tape. I never attached mine to the wall, just have it sitting on my desk. I've been very happy with it!
Question:	how can i order different channels and how many channels are available
Answer:	The Xodus HW2175 has 4 channels
Question:	If I order two, how can I make sure they come in different frequencies
Answer:	Turns out this device is the same thing as a DEWENWILS remote wall switch (also sold by Amazon) in a different case. There is a programming procedure for adding another remote that works on this Westek device: 1. Plug the receiver into an indoor outlet. 2. Press and hold the programming button on the receiver until the indicator light begins to flash slowly. 3. Release the programming button and press ON button, then OFF button on your remote. 4. The light stops flashing and keeps on indicate the programming has already been set successfully. I was able to program both switch plates to one plug with the above procedure. Hope this helps everyone!!

Product features

Wall Mounted Switch and Plug-In Receiver

The new AmerTac RFK1600LC Westek Wall Mounted Switch and Plug-in Receiver is the easiest way to add switched outlet convenience without any

complicated wiring or the need for an electrician. Installation is as simple as plugging your device into the receiver and the receiver into any outlet. The wall mounted transmitter is designed as a stylish rocker style light switch that matches any decor.

Automatic Pairing & Grounded Outlets

These RF controls have an automatic pairing feature that allows multiple receivers to be custom grouped together for maximum flexibility. There is no limit to the number of receivers a single transmitter can control and every receiver can be paired with up to 5 transmitters.

The receiver features a single grounded outlet and a manual override button to turn your device on and off without the transmitter. The button has a pleasing green LED light to indicate when the device is on. The transmitter is powered by a 12V A23 type replaceable battery. Every receiver can be paired with up to 5 transmitters.