13 best vape wires
Vape wires, in the context you mentioned, refer to the types of wires used in building coils for electronic cigarettes or vaping devices. These wires play a crucial role in determining the resistance and performance of the coil. Here are some key points about vape wires:
Materials:
- Vape wires are typically made from various materials, including Kanthal, Nichrome, Stainless Steel, and Nickel (Ni200), among others.
- Each material has its own unique properties that affect the resistance, ramp-up time, and temperature control capabilities of the coil.
Kanthal:
- Kanthal is a popular choice for vape wires due to its high melting point and durability.
- It is known for its consistent resistance, making it easy for users to predict the performance of their coils.
Nichrome:
- Nichrome is an alloy composed of nickel and chromium. It is known for its lower resistance compared to Kanthal, which can result in faster ramp-up times.
- It is less prone to oxidation than Kanthal, which can lead to a longer lifespan.
Stainless Steel:
- Stainless steel is a versatile material used in various industries, including vaping. It is known for its durability, resistance to corrosion, and versatility in both wattage and temperature control modes.
- Stainless steel can be used for both wattage and temperature control vaping.
Nickel (Ni200):
- Nickel is a wire material known for its very low resistance. It is primarily used for temperature control vaping, as its resistance changes predictably with temperature.
- It's important to note that nickel wire should not be used in wattage mode due to potential safety risks.
Resistance and Gauge:
- Vape wires are available in different gauges (thicknesses), which directly affects the resistance of the wire.Thicker wires have lower resistance, while thinner wires have higher resistance.
- The resistance of the coil is also influenced by the number of wraps and the diameter of the coil.
Safety and Compatibility:
- It's crucial to use wires that are compatible with the specific vaping device and mode (wattage or temperature control) you intend to use. Using the wrong type of wire can lead to safety risks.
Coil Building:
- Vape enthusiasts often engage in "coil building" where they create custom coils to achieve specific vaping experiences. This involves wrapping the wire around a mandrel or coil jig and securing the ends.
Regulation and Safety:
- When using vape wires, it's important to follow safety guidelines to prevent short circuits or other potential hazards.
- Familiarity with Ohm's law and battery safety is crucial for anyone involved in coil building.
Always exercise caution and follow safety guidelines when handling vape wires. Proper knowledge of the materials and their properties is essential for a safe and enjoyable vaping experience.
Below you can find our editor's choice of the best vape wires on the market
Kanthal A1-100' - 24 Gauge Resistance Wire
Master Wire Supply
Product description
Wire Specifications:
- Diameter: 24 Gauge / 0.51mm
- Shape: Round
- Alloy Kanthal A-1
- Length 100 ft.
- Heat Treatment Annealed (soft)
- Melting Temperature 1500°C / 2730°F
- Max Continuous Operating Temp: 1400°C / 2550°F
- Resistance: 2.04 Ohms/ft at room temperature
Kanthal A-1 is a ferritic iron-chromium-aluminium alloy (FeCrAl alloy) for use at temperatures up to 1400°C (2550°F). The alloy is characterized by high resistivity and very good oxidation resistance. This alloy is less susceptible to distortion, growth, and increase in resistance when heated than other alloys of similar composition.
This wire is for repair and maintenance of electronic components. Typical applications for Master Wire Supply Kanthal A-1 are: home and industrial heaters, diffusion heaters, dishwashers, cooking plates, electric blankets, hair dryers, kerosene-fired appliances, kettles, refrigerators, rice cookers, tumble dryers, washing machines, electrical heating elements in high-temperature furnaces for heat treatment, ceramics, glass, steel, and electronics industries.
- Kanthal A-1 24g 100 ft
- Annealed Bright
- For use as a resistor in electronics projects
- 2.04 Ohms/ft Resistance
- For use at temperatures up to 1400°C (2550°F)
User questions & answers
| Question: | Can be used on RDA |
| Answer: | Yes, using this in my TFV12 Prince. |
| Question: | Can this wire be used to heat a furnace |
| Answer: | I cannot answer that question. I CAN tell you that I heat it in glass fusing projects in temps as high as 1400 degrees. It’s great! |
Staggered Fused Clapton wire 10ft - (26GA+32GA) x2+32GA Resistance Wire, Stainless Steel 316L Prebuilt Wires for Household Wiring Use
Product description
This is a heating element wire for use in Kilns and furnaces for pottery, metal casting, heat treating, forging, and many other uses Length: 10 Feet Shape:Flat
- Stainless Steel 316L Heat Resistant Wire
- (26GA+32GA)x2+32GA - 10FEET/roll
- This product is not intended to be used with prohibited or illegal products
- The product shall be used by advanced users ONLY
- weight:90g
User questions & answers
| Question: | Can anyone confirm if this is ss316l only? i've had different coils that said it was ss316l and found it was ss and a1 or ni80 that won't work in tc |
| Answer: | /Duration 0:14Loaded: 0.00%Stream Type LIVESeek to live, currently playing liveLIVERemaining Time -0:14 Playback Rate1xChaptersChaptersDescriptionsdescriptions off, selectedCaptionscaptions off, selectedAudio TrackFullscreenThis is a modal window. .noScriptDisplayLongText { display : none; } .noScriptNotDisplayExpander { display : none; } .noScriptDisplayLongText { display : block; } Can confirm. As you can see it doesn’t kick out of TC mode and will respond to temperature |
Kanthal A1 Wire Sample Pack 25' Each 22,24,26,28,30,32,34,36 Gauge
Master Wire Supply
Product description
This is the perfect combo for electronic or craft wire enthusiasts looking to receive a variety of wire for a great price. 8 Gauges included. 8 spools, 200 feet of wire total You will receive 1 25 ft spool of each 22, 24, 26, 28, 30, 32, 34, and 36 gauge Kanthal A1 Wire
- Shape: Round
- Alloy: Alloy Kanthal A-1
- Heat Treatment Annealed (soft)
- Melting Temperature 1500°C / 2730°F
- Max Continuous Operating Temp: 1400°C / 2550°F
Kanthal A-1 is a ferritic iron-chromium-aluminium alloy (FeCrAl alloy) for use at temperatures up to 1400°C (2550°F). The alloy is characterized by high resistivity and very good oxidation resistance. This alloy is less susceptible to distortion, growth, and increase in resistance when heated than other alloys of similar composition.
This wire is for repair and maintenance of electronic components. Typical applications for Master Wire Supply Kanthal A-1 are: home and industrial heaters, diffusion heaters, dishwashers, cooking plates, electric blankets, hair dryers, kerosene-fired appliances, kettles, refrigerators, rice cookers, tumble dryers, washing machines, electrical heating elements in high-temperature furnaces for heat treatment, ceramics, glass, steel, and electronics industries.
- For use as a resistor in DIY electronics or for craft wire projects
- Kanthal A-1 Wire
- 8 Gauges included. 8 spools, 200 feet of wire total
- 1 - 25 ft spool of each 22, 24, 26, 28, 30, 32, 34, and 36 gauge Kanthal A-1 Wire
User questions & answers
| Question: | Do you receive 25 or 50 foot spools as the description contradicts the picture |
| Answer: | The package I received was 25 foot rolls of each. I will say it is decent wire. Making Claptons and fused Claptons came out really nice as well as the staggered fused Claptons. |
Parallel Clapton Nichrome 80 28gx4+38g 6ft Electronic Resistance Wire
Product description
Material:Nichrome 80
Diameter:4PCS 28Gauge wire winding together, then wrapped with a 38 Gauge Wire
Length: 6' Feet
Shape: Flat
- Nichrome 80 28g*4+38g 6ft
- Ideal for electronics projects
- Craft projects
- This product is not intended to be used with prohibited or illegal products
- For use as a resistor
Clapton Kanthal A1 26g+32g 15ft Electronic Resistance Wire
Product description
Material: Kanthal A1
Diameter: 26 Gauge wire, wrapped with a 32 Gauge Wire
Length: 15' Feet
Shape: Round
- Kanthal A1 26g+32g 15ft
- Ideal for electronics projects
- Craft projects
- This product is not intended to be used with prohibited or illegal products
- For use as a resistor
Kanthal A1-100' - 22 Gauge Resistance Wire
Master Wire Supply
Product description
Wire Specifications:
- Diameter: 22 Gauge / 0.64mm
- Shape: Round
- Alloy Kanthal A-1
- Length 100 ft.
- Heat Treatment Annealed (soft)
- Melting Temperature 1500°C / 2730°F
- Max Continuous Operating Temp: 1400°C / 2550°F
- Resistance: 1.31 Ohms/ft at room temperature
Kanthal A-1 is a ferritic iron-chromium-aluminium alloy (FeCrAl alloy) for use at temperatures up to 1400°C (2550°F). The alloy is characterized by high resistivity and very good oxidation resistance. This alloy is less susceptible to distortion, growth, and increase in resistance when heated than other alloys of similar composition.
This wire is for repair and maintenance of electronic components. Typical applications for Master Wire Supply Kanthal A-1 are: home and industrial heaters, diffusion heaters, dishwashers, cooking plates, electric blankets, hair dryers, kerosene-fired appliances, kettles, refrigerators, rice cookers, tumble dryers, washing machines, electrical heating elements in high-temperature furnaces for heat treatment, ceramics, glass, steel, and electronics industries.
- Kanthal A-1 22g 100 ft
- Annealed Bright
- For use as a resistor in electronics projects
- 1.31 Ohms/ft Resistance
- For use at temperatures up to 1400°C (2550°F)
User questions & answers
| Question: | Does this wire rust if washed? I will be using it to make the nose pieces in masks |
| Answer: | No - it doesn’t rust ... but this wire is made specifically to fire in a kiln to 2000 degrees - you may not need “Kanthal” wire for your face masks ... but it certainly won’t rust |
| Question: | I'm looking to use this wire in my model train layout as electrical wires on poles and I need to know if this wire is stiff or pliable |
| Answer: | This is very pliable. My husband used this wire for coils in his vape and I have since been using it for nose pieces in masks. |
| Question: | Can this wire fire to cone |
| Answer: | I use it for torchwork. It gets to about 1200 degrees in the flame. Don't know what temp cone 6-10 is. |
| Question: | can this wire be used in a 240 volt heat treat oven. it will have 240 volts ran to it |
| Answer: | As long as you keep Ohm's law V=IR in mind "maybe", but probably not recommended. You would probably want to go with steel resistance wire. However again you will need to research the resistance you will need in the oven and then see how much wire and what gauge is needed Ohm's Law again. |
DIY Heating Coil Wire Kanthal A1 Resistance Wire 15 Feet (Alien 0.3x0.8+32GA)
Wire
Product description
Kanthal A1 Heat Resistant Wire:0.3*0.8+32GA.
- Kanthal A1 Heat Resistant Wire:0.3*0.8+32GA.
- The product shall be used by advanced users ONLY.
- This is a heating element wire for use in Kilns and furnaces for pottery, metal casting, heat treating, forging, and many other uses.
- Package including the organic cotton as a gift.
- We provide warranty time, please don't hesitate to buy, if you have any problem, we will give the satisfy solution.
User questions & answers
| Question: | I have a vintage cory vaccum coffee pot stove. I need a few inches of coiled wire to complete the circuit. its 110v but i do not know the resistance |
| Answer: | Dear friend,This coil wire of the finished product resistance is 0.45ohm,but i But I don't recommend using it on your coffee pot stove. It is only suitable for use on the evaporator.Thank you! |
| Question: | Are both the wrapping and cores kanthal |
| Answer: | I believe so. I'm about to order some more. I've been using it over my others and I really like it alot. |
| Question: | What is the resistance per foot of this wire |
| Answer: | Dear friend,thank you very much for your question.The resistance is based on the the coil head you made , the resistance of sigle coil head is 0.45 Ω by this wire.I hope you are satisfied with my answer, wish you have a nice day! |
| Question: | What is the warranty for Alien 0.3*0.8+32GA |
| Answer: | Dear friend, thank you very much for your question. The warranty is one year, but if you have any problems, you can contact us anytime. We will try our best to provide satisfactory after-sales service.Have a nice day! |
Kanthal A1-100' - 26 Gauge Resistance Wire
Product description
Wire Specifications:
- Diameter: 26 Gauge / 0.40mm
- Shape: Round
- Alloy Kanthal A-1
- Length 100 ft.
- Heat Treatment Annealed (soft)
- Melting Temperature 1500°C / 2730°F
- Max Continuous Operating Temp: 1400°C / 2550°F
- Resistance: 3.21 Ohms/ft at room temperature
Kanthal A-1 is a ferritic iron-chromium-aluminium alloy (FeCrAl alloy) for use at temperatures up to 1400°C (2550°F). The alloy is characterized by high resistivity and very good oxidation resistance. This alloy is less susceptible to distortion, growth, and increase in resistance when heated than other alloys of similar composition.
This wire is for repair and maintenance of electronic components. Typical applications for Master Wire Supply Kanthal A-1 are: home and industrial heaters, diffusion heaters, dishwashers, cooking plates, electric blankets, hair dryers, kerosene-fired appliances, kettles, refrigerators, rice cookers, tumble dryers, washing machines, electrical heating elements in high-temperature furnaces for heat treatment, ceramics, glass, steel, and electronics industries.
- Kanthal A-1 26g 100 ft
- Annealed Bright
- For use as a resistor in electronics projects
- 3.21 Ohms/ft Resistance
- For use at temperatures up to 1400°C (2550°F)
User questions & answers
| Question: | What about the product |
| Answer: | What about it? |
| Question: | is this the one being used for vape |
| Answer: | Sure is |
Alien Clapton Kanthal A1 26gx3+32g 6ft Electronic Resistance Wire
Product description
Material: Kanthal A1
Diameter: 3*26 Gauge wire, wrapped with a 32 Gauge Wire
Length: 6' Feet
Shape: Flat
- Kanthal A1 26gx3+32g 6ft
- Ideal for electronics projects
- Craft projects
- This product is not intended to be used with prohibited or illegal products
- For use as a resistor
User questions & answers
| Question: | What is the resistance of a 5 wrap of your wire |
| Answer: | Not sure. It isn't 26x3 like it claims. It's a piece of ribbon wire wrapped with 40 or so guage wire. Buyer beware. |
| Question: | are these actually alien wrapped or fused claptons with the wire going more straight around rather than the s shape of the aliens |
| Answer: | Alien Clapton is our own heating wire. The wire size is 26GA*3+32GA. It is flat like Alien. Thank you for your support |
Mixed 550 Feet of Kanthal A1 Wire 22,24,26,28,30,32,34,36 Gauge Pack
Product description
This is the perfect combo for electronic or craft wire enthusiasts looking to receive a variety of wire for a great price. 8 Gauges included. 8 spools, 550 feet of wire total You will receive 1 50 ft spool of each 22, 24, 26, 28, 30 and 1 100 ft spool of each 32, 34, 36 gauge Kanthal A1 Wire
- Shape: Round
- Alloy: Alloy Kanthal A-1
- Heat Treatment Annealed (soft)
- Melting Temperature 1500°C / 2730°F
- Max Continuous Operating Temp: 1400°C / 2550°F
Kanthal A-1 is a ferritic iron-chromium-aluminium alloy (FeCrAl alloy) for use at temperatures up to 1400°C (2550°F). The alloy is characterized by high resistivity and very good oxidation resistance. This alloy is less susceptible to distortion, growth, and increase in resistance when heated than other alloys of similar composition.
This wire is for repair and maintenance of electronic components. Typical applications for Master Wire Supply Kanthal A-1 are: home and industrial heaters, diffusion heaters, dishwashers, cooking plates, electric blankets, hair dryers, kerosene-fired appliances, kettles, refrigerators, rice cookers, tumble dryers, washing machines, electrical heating elements in high-temperature furnaces for heat treatment, ceramics, glass, steel, and electronics industries.
- For use as a resistor in DIY electronics or for craft wire projects
- Kanthal A1 Wire
- 8 Gauges included. 8 spools, 550 feet of wire total
- 1 - 50 ft spool of each 22, 24, 26, 28, 30 Gauge wire and
- 1 - 100 ft spool of each 32, 34, 36 gauge Kanthal A1 Wire
Juggernaut Kanthal A1 (28g+32g) x2+flat0.1x0.8 6ft Electronic Resistance Wire
Product description
Material: Kanthal A1
Diameter: 28 Gauge Wire wrapped with a 32 Gauge Wire, then 2PCS such wire as the core, Outside wraped by a flat 0.1*0.8 wire.
Length: 6' Feet
Shape: Flat
- Kanthal A1 (28g+32g)x2+flat0.1x0.8 6ft
- Ideal for electronics projects
- Craft projects
- This product is not intended to be used with prohibited or illegal products
- For use as a resistor
Pre made Resistance Heating Wire 9 Different Coils 82pcs for DIY project Alien Kanthal A1 Kit
Product description
Specification:
- Material: aluminum alloy A1
- Internal Diameter: 3mm
- Quantity in package: 9 types 82Pieces totally.
Including:
- 10 x Alien wire 0.45ohm
- 10 x Super Flat wire 0.3ohm
- 10 x Clapton 0.8 wire 0.8ohm
- 10 x Fused wire 0.4ohm
- 10 x Clapton 0.4 wire 0.4ohm
- 8 x Staggered wire 0.3ohm
- 8 x Juggernaut wire 0.45ohm
- 8 x Staggered Fused wire 0.27ohm
- 8 x Staircase wire 0.25ohm
Above OHMs are for single one.
Note:
- Keep out of reach of children and pregnant women.
- Keep away from high temperatures.
- Do not use the wires if you are under the age of 18.
- High Quality: Made by aluminum alloy, stable, high quality and healthy prebuilt wires
- Durable & Easy to Use:1400℃/ 2550°F high melting temperature, 3mm resistance wire kit, easy install and durable
- Well Organized: Coming with 9 metal cases, portable for travel and reusable
- Easy Use:Push down on the label to open; Squeeze the sides of cover to pop back
- Get the 9in1 Kit now!
User questions & answers
| Question: | What is the wattage range for these coils? They burnout in about a day for me |
| Answer: | I can run mine up to 200w when I want. Theyre vape Coils. Theyre eventually going to gunk up but ive never fried any of these. |
| Question: | Does anyone know if these will work for aegis boost RBA |
| Answer: | Way to big for the boost rba. |
| Question: | Can you tell me what average OMS of the coils |
| Answer: | .02 on a dual |
| Question: | Are these actually made out of aluminum |
| Answer: | These are made by Kanthal A-1, which is a ferritic iron-chromium-aluminium alloy (FeCrAl alloy). Thanks! |
Super Juggernaut Kanthal A1 28g+32g+24g+Flat0.1x0.8 6ft Electronic Resistance Wire
Product description
Material: Kanthal A1
Diameter: 28Gauge wire as the core, Middle wrapped with 32 Gauge Wire, then wrapped with a 24 Gauge wire, Outside wraped by a Flat 0.1*0.8 Gauge wire.
Length: 6' Feet
Shape: Flat
- Kanthal A1 28g+32g+24g+Flat0.1x0.8 6ft
- Ideal for electronics projects
- Craft projects
- This product is not intended to be used with prohibited or illegal products
- For use as a resistor
Latest Reviews
View all
Planet Audio 10 Inch Subwoofers
- Updated: 25.02.2023
- Read reviews
Cleaner For Cpap Machines
- Updated: 07.02.2023
- Read reviews
Scrubber For Men
- Updated: 04.05.2023
- Read reviews
Beats Pocket Projectors
- Updated: 01.02.2023
- Read reviews
Trailer Blueprints
- Updated: 11.03.2023
- Read reviews