13 best convertible well pumps

Product description

Overload protection : Yes 1 hp dual voltage motor (115/230V) rugged cast iron pump body for durability tough thermoplastic impeller glass filled thermoplastic diffuser cast iron seal plate pre-mounted, fully adjustable pressure switch for shallow well applications up to 25' depth can be used in deep well applications.

• 1 HP Cast iron convertible jet pump moves water from well up to 80-vertical feet to lift; Can be used in deep well applications up to 80 feet
• Rugged cast iron construction; Tough thermoplastic impeller and glass filled thermoplastic diffuser
• Continuous duty, thermally protected split capacitor motor; Dual voltage motor (115/230V) and includes ejector kit, cULus Listed
• Pre-mounted fully adjustable pressure switch and cast iron seal plate
• Superior Pumps are Built to Last, engineered with quality components and are 100% factory tested

User questions & answers

Question:	Looking for a pump to set at 40psi on/60psi off, will the 1/2 hp convertible pump work for this at 115 volts
Answer:	Yes
Question:	Anybody know which of the two venturi pipes I would use in the ejector kit for an 80 foot deep well
Answer:	If it looks the same and you have 12 volt system it will probally work
Question:	Does this pump have a copper wound or aluminum wound motor
Answer:	I have the same model bronco mower and I bought this solenoid for mine, after a slight modification, worked like a charm. The posts on this solenoid are a little larger than the factory solenoid which means that you will have to widen the center of the connectors to fit on the solenoid posts.
Question:	Is this pump very noisy when it runs
Answer:	You should be looking on the side frame. You require part #725-04439AAMC Parts Store

Product description

The BURCAM 506321 cast iron convertible jet pump is designed for use in conjunction with a captive air pressure tank to deliver potable water with a maximum vertical lift of 70 feet to the home, cottage or farm. This pump can be used either in a shallow well application with a maximum vertical lift of 25 feet, or in a deep well application (with the ejector in the well) for a maximum lift of 70 feet. The ½ HP, dual voltage 115/230V, totally enclosed fan-cooled motor, bearing to bearing, is equipped with automatic thermal and overload protection and a full-time run capacitor. The large cast iron body is easy to prime. The pump can deliver a maximum pressure of 65 PSI, but comes assembled with a 30/50 PSI pressure switch. The pump also includes a 0-100 PSI pressure gauge. The capacity is up to 805 US GPH (shallow well application) and 650 US GPH (deep well application).

Product description

DESIGN SERIES 'SL SELF PRIMING CONVERTIBLE JET PUMPS - Sta-Rite Design Series 'AL & 'FSL Convertible Jet Pumps feature proven self priming and 'convertible design. Same convertible jet can be attached to pump for use on shallow well installation . . .can be utilized in 4 or larger wells as use as double pipe deep well jet. Design Series 'AL pumps provide high capacities up to 1900 GPH depths to 120 feet; and are available as basic pump only, or with various combinations of pressure tanks.

Product description

Convertible Jet Pump, HP 3/4 hp, Rated Voltage 115/230V AC, Amps 10.8/5.5, Ejector Included No, Flow Rate @ 10 Ft. Lift @ 30 PSI 14.5 gpm, Flow Rate @ 10 Ft. Lift @ 40 PSI 9.1 gpm, Flow Rate @ 10 Ft. Lift @ 50 PSI 3.6 gpm, Flow Rate @ 20 Ft. Lift @ 30 PSI 9.7 gpm, Flow Rate @ 50 Ft. Lift @ 30 PSI 6.5 gpm, Flow Rate @ 50 Ft. Lift @ 40 PSI 3.6 gpm, Flow Rate @ 50 Ft. Lift @ 50 PSI 1.1 gpm, Flow Rate @ 80 Ft. Lift @ 30 PSI 2.9 gpm, Max. Suction Lift 80 ft, Body Material Thermoplastic

Product description

Gould's GT15 Self-Priming Design Once pump is initially primed, filled with water, it will reprise when the water level rises above the end of the suction pipe. Back pullout design allows disassembly of pump for service without disturbing piping. Two compartment motor for easy access to motor wiring and replaceable components. The Bolt down diffuser provides positive alignment with impeller. Diffuser has stainless wear ring for extended performance in abrasive conditions. F.D.A. compliant, injection molded, food grade, glass filled Lexan for durability and abrasion resistance. Impeller: F.D.A. compliant, glass filled Noryl. Corrosion and abrasion resistant. Corrosion Resistant: Electro-coat paint process is applied inside and out, then baked on. Casing: Cast iron construction. Four bolt, back pull-out design. Tapped openings provided for vacuum gauge and casing drain. Powered for Continuous Operation: Pump ratings are within the motor manufacturer's recommended working limits. Can be operated continuously without damage. Mechanical Seal: Carbon/ceramic faces, BUNA elastomers. 300 series stainless steel metal parts. Pump design prevents the seal from running dry. APPLICATIONS: Specifically designed for the following uses: Lawn sprinkling • Irrigation • Air conditioning systems • Heat pumps • Water transfer • Dewatering GENERAL GT SERIES SPECIFICATIONS Pump: • Pipe connections: 1½" NPT suction 1½" NPT discharge • Capacities: to 110 GPM at 5 foot suction lift • Heads: to 128 feet • Reprise capabilities: to 25 feet suction lift • Maximum working pressure: 125 PSIG • Maximum water temperature: 140° F (60° C) • Rotation: clockwise when viewed from motor end. Motor: • NEMA standard open drip proof • 60 Hz, 3500 RPM • Stainless steel shaft • Single phase: ¾-1½ HP, 115/230 V; 2 and 3 HP, 230 V only. Built-in overload with automatic reset.

• Self-Priming Design
• Fully Serviceable
• FDA Compliant Impeller
• Corrosion Resistant
• Powered for Continuous Operation

User questions & answers

Question:	I’m replacing a sta-rite ds3hf-01 1.5hp, would this be the correct replacement pump
Answer:	This purchase is for the pump and motor, you have to purchase the tank separately.
Question:	Can this pump irrigate 3.4'' pipe at 300' at 25' rise
Answer:	The yellow/green wire, which is marked 'PE', is the ground wire and must be connected with ground. The other 2 wires are hot and neutral. It does not matter if you wire hot to hot, or hot to neutral. Thank you.
Question:	if this water pump is purchased do i need any additional items, like pressure tanks, gauges etc
Answer:	Yes, for the clear water final stage of an aerobic system. Used this model/brand on mine for past 7 years. Did just replace today (second one). Last one was in there 3 or 4 years. I'm here buying anther one to have on hand. I have a drop in submersible pump I use to draw down the flooded tank to be able to work on the old. It's a 2 or 3 hour job. If you pay for it to be done and pay for "their" pump, I would bet it's $500-$800.
Question:	looking to pump water from a rain barrel at ground level to flush toilets on 2nd floor of home. will this do the job
Answer:	When it breaks, None! They wouldn't fix it or replace it.

• ★【Technical Specifications】4"，1HP, 230V, 5.1Amps , 60Hz,1-1/4” NPT discharge. 8 Impellers；Fits in a 4" casing.
• ★【Economy & Effective】33GPM max & 207ft head；33ft lengthy electric cord -allows for easy connection; built-in controlbox;built-in check vavle;built-in thermal protection
• ★【Outstanding Performance】Stainless steel body& permanent magnet motors&thermoplastic impellers -industrial grade heavy duty - guarantees high durability and long-lasting use;
• ★【Widely Application】 Perfectly convenient for use at home and for factory usage;can be implemented in different types of wells-ash pipe wells, steel pipe wells, or soil wells；Can be used for extracting water from reservoirs, canals, rivers, open water tanks and other water lifting works
• ★【 Built-in Controlbox】This item is with a built-in control box, it is for thermal protection, short-cut protection and overload protection

Product features

iMeshbean Submersible Deep Well Pump

• Outlet Diameter :1-1/4" NPT Discharge
• Diameter: 4"
• Protection Grade: IP58
• Pump Body Material: Stainless Steel - High strength and corrosion resistance
• Water Temperature: (32 ~113 ℉ )
• Water Ph: 6.5~ 8.5
• Maximum Sand Content: 0.25%

Coupling & Outlet

• Cast iron with electrophoretic paint.
• Easy to install and connect with the water pipe.

Stainless Steel Strainer

• Fixed with a filter screen to prevent solid grain of a given size from entrance of the pump

Power Cord

• 33 FT Power Cord
• 2 wire pump with 3-Wire (2 wires + ground wire)

Strong Motor:

• Copper Wire Coil
• High Efficiency
• Strong Power

High Precision Rotor:

• High Efficiency
• Stable
• Energy-saving
• Long-life

High-quality Bearing:

• Strong wear resistance.
• High-hardness
• Rustless

Applications:

• Water supply from wells or reservoirs
• Household use, for civil and industrial applications
• Garden and courtyard irrigation
• Swimming pool filling
• Fountains

Product description

Deep well pump, 3", 3/4Hp, 230V/60Hz/1pH, 14 stage, 270' head max, 13 GPM max, 1"npt, stainless steel, 10' cable, W/check Valve.Features & Technical Specifications: 3 inch deep well submersible pump. Max OD 3.3", fits in a 4" well casing. 3/4 HP, 230V, 4.6 Amps, 1” NPT discharge. 247 max head, heavy duty. Industrial grade heavy duty, also good for home usage. Heavy duty UL certified motor. Patented impeller & 14 stage design. 13 GPM max, 247 ft head . 247' head is for open water tank. Head for pressure tanks will be lower! Buyer MUST read the 'Pump Selection Guide'! Patented impeller & UL approved motor designs ensure extra long pump life, great flow and head. Shell, motor shaft are made with stainless steel to ensure corrosion resistance. High quality sealed ball bearings guarantee its excellent performance. Hermetically sealed motor has a built in capacitor start, and thermal protection to prevent overheating, for longer life and powerful start. Built in control box. This pump DOES NOT require an external control box! This pump uses high quality and high efficient UL approved motor, UL file No.: E233961, and uses less energy This is a 2 wire pump. 10' long electric cord included. Heavy-duty thermoplastic impellers, diffusers, and intake screen. High efficiency, hermetically sealed motor is thermally protected to prevent overheating, and uses less energy. This pump has a built in check valve. Unique design reduces its noise. Free technical support available during your installation Warranty: 12 months limited manufacturer's warranty.

User questions & answers

Question:	does this pump have dry pump or run dry protection
Answer:	It is clear-Transparent.
Question:	will this pump work in my 77 foot well
Answer:	Good value for flexible silicone tubing. I’m using it to provide water cooling to a CO2 hobble laser cutter, and it performs well. The thickness and durometer of the tubing keeps it from collapsing and kinking when bent.
Question:	We’re do u hook up ground wire
Answer:	This silicone hose is soft and pliable so I think it would collapse under a vacuum. It might stand a little pressure but probably not much. It's claim-to-fame is that it will stand up to very high temperatures.
Question:	Can I get this with 1 1/4” npt Connection
Answer:	The answer really depends on the manufacturing process of the tubing and the temperature and pressure your pump operates at. You can buy one to test.

Product description

The J10 is specifically designed for homes farms cottages and booster services. Its convertible design may be used on shallow or deep well applications using appropriate fittings. This pump features a back pull-out design two compartment motor for easy access to wiring nozzle clean out plug in shallow well adapter and is corrosion resistant. Volts: 115/230, Amps: 16.2/8.1

• Powered for Continuous Operation, Pressure regulator included.
• Corrosion Resistant
• Protected Mechanical Seal
• Excellent Air Handling Ability
• NEMA standard
• Pumps are manufacturer tested and may contain water inside from such testing

User questions & answers

Question:	Can the J10 be convereted to a J10S
Answer:	Yes these have similar pump curves.
Question:	What is the pressure range of this pump
Answer:	Not recommended.The GT15 pump has a 1-1/2" discharge. Designed for large volume flow.Reducing to 3/4" creates WAY TOO much back pressure for this pump. (Back pressure creates HIGH Total Dynamic Head - TDH)In your scenario, Let's say your irrigation system requires a flow rate of 15 GPM @ 35 psi @ 300 ft away from pump Running 15 GPM thru 3/4" pipe for 300 ft = ~130 ft TDH (Pressure Loss = 56 psi)Plus the 25 ft rise (Pressure loss = 11 psi)And let say you want 35 psi (Higher PSI = Higher TDH) = ~80 ft TDH (Pressure Loss 35 psi)That said, you would need a pump that can operate upwards of 235 TDH (Pressure loss to overcome = 102 psi)The GT15 has a MAX TDH of ~120 ft TDH (or ~ 52 psi) Don't use this pump for your system...it will not work.
Question:	does this pump come with an ejector package
Answer:	Definitely Yes!You will need a pressure chamber that keep the pump from burning up due to cycling on and off. Contact Barton Pump for the correct size. Get a chamber with a bladder. The make them with a bladder and without. You will need a water gauge. to see what the operating pressure is. Also, you must determine what pressure when you need.operating. What are you using the pump for? Whether you need a debris filter.
Question:	I need a convertible pump for a deep well. pipe connections: 1¼" npt suction, 3/4" npt discharge, 1" npt drive (pressure). is this pump suitable
Answer:	Overkill, you don't need that much power.

Product description

Hallmark Industries MA0419X-12AEXT pump, 4 inch deep well submersible, 2 HP, 230VAC/60Hz/1pH, 35 GPM max, stainless steel, with control box

Features & Technical Specifications:

* 4" deep well submersible pump. Fits 5" or bigger well casing (will not fit 4" well casing).

* 2 HP, 230V, 10.2 Amps, 12 stage, 1-1/4” NPT discharge.

* Industrial grade heavy duty, also good for home usage.

* Patented impeller & 12 stage unique design provide a much longer pump life than other brands.

* 35 GPM max & 400ft head are greater than almost all other 2HP well pumps, and comparable to 3HP pumps, but uses less electricity.

* 400 ft is total water head.

* Water temperature: (32 ~113oF) Trans medium’s Ph: 6.5~ 8.5

* Shell, motor shaft are made with stainless steel to ensure corrosion resistance. High quality sealed ball bearings guarantee its excellent performance.

* Hermetically sealed motor has thermal protection to prevent overheating, for longer life and powerful start.

* This pump comes with a starter box (control box).

* This pump uses high quality and high efficient UL approved motor, UL file No.: E233961, and uses less energy

* This is a 3 wire pump with ground wire (total 4 wire)

* 10' long electric cord, installation tape & electric tape kits are all included in the package.

* Heavy-duty thermoplastic impellers, diffusers, and intake screen.

* Unique design reduces its noise.

* User's manual included. Free technical support available during your installation.

* This pump has a built in check valve. However installing additional check valves is required.

* Shipped with pump head and motor separately. Assembly required.

User questions & answers

Question:	What is the gpm and psi ratings on this pump set at 300' deep
Answer:	If the water level is 300', the max psi the pump can produce is 43 psi. Please note it is based on the water level, not where the pump is. At max psi the flow is 0 gpm. At 300' water level with no pressure, the flow is about 15 gpm. Thank you.
Question:	Do you have a 3/4hp, 220 volt 4" deep well pump
Answer:	Yes. The part # is MA0459X-14A by Hallmark Industries Inc. Thank you.
Question:	Can you upgrade control box? If so, what type/size did you upgrade to
Answer:	The control box contains a starting capacitor which is designed to match the pump. So you can not change the control box. Thank you.
Question:	Do you have 3" 110 volt with 1" outlet box built in
Answer:	Yes. This is the link: https://www.amazon.com/Hallmark-Industries-MA0459X-14-S-Shell-Stainless/dp/B07BPFJ9BQ

Product description

Little Giant submersible motor, PPO staging, 10' SJOW lead, and poppet check valve.

User questions & answers

Question:	how mant ft deep can reach? and can i use it in farm
Answer:	Hi there, We do not make one that can be set to a 40/60. The pressure switch can be adjusted to a 30/50 and maybe a bit higher but not to 60 PSI Thanks
Question:	Is the motor a 2 wire for running current plus ground wire or a 3 wire that needs a control box with a start relay
Answer:	The shorter of the two
Question:	Is a seperate float switch required
Answer:	Hi Jim,This pump has a copper wound motor.Thanks
Question:	does this pump works for deep well for clean water or is just septic systems
Answer:	Hi there, This is a bit odd, maybe give us a call for trouble shooting. call us at 1-800-495-9278 Mon - Fri from 8:am to 8:pm and Sat & Sun from 10:am to 5:pm central time Thanks

Product description

Shallow Well Jet Pump w/Pressure Switch, 1/2 HP 12.5 GPM, heavy duty, 115/230V.

• Shallow Well Jet Pump, 1/2 HP, heavy duty cast iron, 115/230V, 1"NPT
• Suction head 30 ft, Max discharge head: 105ft
• 115/230V, 5.2/2.6A, capacitor start and thermally protected for longer motor life
• Heavy duty
• This pump is for indoor use only. It is not supposed to exposed to outdoor condition.

User questions & answers

Question:	The photographs show a simple 120/240 volt selector switch. Is this all it takes to select the proper voltage or must the motor be re-wired manually
Answer:	The performance depends on the depth you are going to use it. At 50 ft it is 26 GPM at 100 ft it is 20 GPM and at 150 ft it is just 8 GPM. For any deeper one should consider better model.
Question:	Can I adjust the pressure switch? I would like it to come on at 37psi
Answer:	It does not need a start relay. Mine is controlled by a float switch by plugging it into the female side of the float switch plug.
Question:	What size are the inlet and outlet ports
Answer:	Yes it requires a separate float switch. Let me know if you need any further assistance. Josh Septic Worx
Question:	Can this pump more than 40psi with an external switch? 40psi is too low for me
Answer:	The Effluent pump line is not recommended for use in drinking water applications. It uses different materials of construction and has not been certified for use in drinking water.

Product features

Shallow well jet pump, heavy duty cast iron

115/230V dual voltage, 60hz.

Product description

The BURCAM 101128H 10 GPM, 1/2HP, 230V, 60Hz, 3-wire + ground deep well submersible pump is recommended for homes, cottages and farms for installation in water wells that are 4-inches in diameter or larger. Made of non-corrosive 316 stainless steel with a NEMA standard interchangeable head that includes 9 stages of precision-machined stainless steel impellers and diffusers and a hexagonal stainless steel drive shaft, this pump features a continuous duty motor for durability. The control box is included with the pump. It pumps up to 890 US GPH and has a maximum head of 225 feet. Best efficiency is between 73 and 123 feet (with a 20/40 PSI pressure switch) or 50 to 100 feet (with a 30/50 pressure switch).

Product description

ECO-FLO Products exceed the competition in flow and head performance. Test laboratory and ISO 9000 facility account for quality built pumps that are all CSA approved. The eco-flo commitment is to produce pumps for the long term at the best value.

From the Manufacturer

ECO-FLO Products exceed the competition in flow and head performance. Test laboratory and ISO 9000 facility account for quality built pumps that are all CSA approved. The ECO-FLO committment is to produce pumps for the long term at the best value.

• Corrosion resistant all stainless steel exterior construction
• With 2 wire models, all controls are in the pump
• Contains many stainless steel and corrosion-resistant components
• 3/4 Horse Power motor - cast iron discharge connection; Built-in check valve
• Download the User Manual under the Technical Specification section of this page for safety, installation, troubleshooting, and warranty information

User questions & answers

Question:	Where is this pump manufactured or assembled
Answer:	I just selected my voltage and wired it up, (110) works fine.
Question:	What is the output at 50 foot well
Answer:	Yes you can adjuste it
Question:	come with a control box? I need to replace my well that is 230V 1.5HP single phase 25GPM. If this doesnt come with control box can I use old one
Answer:	1" NPT for both. Thank you.
Question:	What warranty comes with this pump
Answer:	The max output head for this pump is 105 feet, which is 45 psi. That includes the suction head. You need MA0345X-9 pump, which is a 1HP. Thank you.

Product features

Selecting the Right Pump

Prior to installing or removing and reinstalling your 4” pump, please confirm the following:

The correct HP for the depth the pump will be in the well.

The correct GPM (gallons per minute) for your application.

The correct voltage.

The correct number of wires.

The correct control box (if applicable).