12 best electrical conduit fittings chart

Product description

Sigma's Clamp Type Cable Connectors are used to terminate NM Cable or Flexible Cord to a 1/2-in knockout in a dry location box or enclosure. These connectors are of die-cast zinc construction. 2 bag.

• Clamp type cable connectors terminate NM Cable or Flexible Cord to a 1/2-in knockout
• For one 14/2 - 10/3 NM Cable or .29-in - .45-in Flexible Cord (See NM Cable Sizes Chart for multiple cable configurations)
• Features a reversible locknut to preserve grounding
• Die-cast zinc construction. Product is UL and CSA Listed. Actual trade size is 3/8-in
• 2 bag. Includes 10 pieces per bag.

User questions & answers

Question:	Is this three connectors, or 3 bags of
Answer:	Yes it worked perfect
Question:	why does the two pack cost less than the one pack? Am I reading that right
Answer:	Sorry, This washer water inlet valve does not fit Frigidaire SFLG4033RT0 laundry center.

• Use with Sealproof straight or right angle connectors; can be used with any Type B metallic or nonmetallic conduit connectors. 50% lighter than metallic conduits, no sharp edges or burrs
• Resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments; resists abuse, pull and crushing; outdoor, sunlight resistant, direct burial.
• Applications: HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment, transformer connections, outdoor lighting
• Made from high quality virgin PVC. Smooth inside for easier wire pulling, no hazardous sharp edges or burrs, will not damage conductors. Light weight and lower installed cost. Quick installation, cuts with utility knife or PVC cutter. Integral rigid & flexible PVC construction
• UL Listed Underwriter's Laboratories File No. E-129973; UL Rating: 80°C dry, 60°C wet. 70°C oil resistant. CSA Certified, Candian Standards Association File No. LL-84705, CSA rating - 18°C to 75°C

User questions & answers

Question:	Would like to cover bare ground wire coming from panel for a short distance until it goes through wall and into ground. Can it take bare 4 awg
Answer:	Please reset the Kevo Plus again. Insert a small pin or paper clip in the hole next to the antenna to restore all settings to factory default. Once the Kevo Plus is reset, setting up gateway must be completed to re-establish the connection. This may take multiple attempts to re-establish the connection. From the Kevo app, Please perform the following steps: To set up the Kevo Plus, please follow the following steps from your Kevo app. Select “+” Icon. Select “Set Up a Device”. Select “Pair a Device”. Select Brand. Select “Kevo Plus”. Select “Get Started”. If owner, select “Checkmark”. Select “ Set Up A Device”. Select “Pair A Device”. Hold Device Near Kevo Plus. It will start Scanning. This may take up to 30 seconds. Make sure Bluetooth is enabled. If needed, Gateway will Update itself automatically. Gateway will search for Kevo locks & Build Connection. Select “Finish Set Up”. You will see Setup Complete. If you still need further assistance, please contact us at 1-800-327-LOCK (5625) so we can run some troubleshooting steps and provide warranty support.
Question:	Is this schedule
Answer:	Yes, Kevo Plus will support multiple Kevo locks within a 100 foot radius from the unit. Please the link provided below for more information. https://www.kwikset.com/kevo/plus
Question:	Can this be used to run single electrical wire outdoors for a power outlet? It would start from ground where the original pipe ends to fence
Answer:	The keys are sent through the Kevo app. So as long as you can install the Kevo app in that phone you should be good.
Question:	I want to run power to an outdoor camera. How vandal proof is this? Can this be cut easily with diagonal cutters
Answer:	You have to be in relatively close proximity to the door for the Kevo lock to recognize your bluetooth connection. The fact that you were connected to your radio via bluetooth in your car should not affect its function. Once you approach your lock (with your smartphone in your front pants or jacket pocket) the KEVO lock will do an electronic handshake and open. Remember to select the option where the Kevo application is running in the background otherwise, if you don't select this option, you'll have to open the Kevo app for the lock to open (I believe). Hope this helps.

Product description

Product Includes: 60 X T-Tap Wire Terminals (Red:20piece, Blue:20piece, Yellow:20piece ) Red: AWG 22-18; Wire range: 0.5-1.0mm; Blue: AWG 18-14; Wire range: 0.75-2.5mm; Yellow: AWG 12-10; Wire range: 4.0mm; 60 X Male Spade Connector (Red:20piece, Blue:20piece, Yellow:20piece ) Red: AWG 22-18; Wire range: 0.5-1.0mm; Blue: AWG 18-14; Wire range: 0.75-2.5mm; Yellow: AWG 12-10; Wire range: 4.0mm; Material: Copper + Nylon Max Ambient Temperature: 106℃.

• Self-Stripping electrical tap connectors - Nilight self-stripping electrical t-tap connectors makes tapping into an existing wire a quick and easy job
• Versatile kit - 60 piece T-Tap Wire Connectors plus 60 piece; Male Quick Disconnects will last for numerous wiring projects. Marine, automotive, scientific, home wiring projects - you name it
• Thick tinned copper contacts - Thicker tinned copper contacts provide maximum conductivity and prevents the wire from shorting out efficiently
• Quality t-tap connector housing - Quick splice T-Tap connectors will securely lock on the wire. Plastic housing will not open after it has been snapped on the wire
• Perfectly fitting male quick disconnects - Nylon male disconnects have been designed to lock tightly on the T-Tap connectors to prevent sliding out

User questions & answers

Question:	Can this be removed or once you put it on it has to stay
Answer:	You can take the clips off but they leave a small cut in the insulation of the wire but the pigtail wire can be easily removed and replaced
Question:	Can this be used to tap 7 lunes to one live load line? Don’t ask why; electrician is an idiot
Answer:	Yes, if there is room for that many on the line. And either the line being tapped should be fused for the total load of all lines, or each individual line should be properly fused for its load.
Question:	Will the large 12 gauge yellow ones work for an outdoor landscape "thicker insulation" burial wire gauge 14 or 16 ? Anyone tried this with success
Answer:	Why would you use these on landscape wiring?? They are not good to use in wet locations. You can either strip the wire back a little fi=urther so the insulation stops at the connector, or you can slightly shave down the insulation to make it thinner so it slides partially into the end of the connector.
Question:	I see some say these are fuse holders. What is it, fuse holder or wire connectors
Answer:	I purchased the Nilight N1-FH01 inline fuse holders. This 120 pc item is not fuse holders. It's possible reviews for all Nilight items are being mixed together and posted with each item.

Product features

Specifications

Quick Splice Connector:

Red | 22-18 Gauge - Wire range (0.5-1.0mm²).

Blue |16-14 Gauge - Wire range (0.75-2.5mm²).

Yellow |12-10 Gauge - Wire range (0.5-1.0mm²).

Nylon Fully Insulated Male Spade terminals:

Red | 22-18 Gauge Wire range: 0.5-1.5mm² (Max current 10A).

Blue |16-14 Gauge Wire range: 1.5-2.5mm² (Max current 15A).

Yellow | 12-10 Gauge Wire range: 4-6mm² (Max current 24A).

Easy Identification

Color-coded tubing makes it easy to identify the right size of the connector for every application.Red: AWG 22-18; Blue: AWG 18-14; Yellow: AWG 12-10.

Safety and reliable

These Self-Stripping Electrical T-Tap Spade Connectors combo makes tapping into an existing wire quick, easy, and reliable, no wire stripping needed.

High Quality

The cores are made of true tinned copper for maximum conductivity and the strongest crimps. It prevents the wire from shorting out efficiently.

• Economical Cable Hider Kit; The cord cover kit contains everything you need for hiding your messy cable in the home & office; Each package contains 6X L15.7in W1.18in H0.6in cable channels; 13X different connectors; 12X Screws; 12X Anchors; 1X Installation Instruction
• Two Super Flexible Installation Methods; Use our free clear PE mounting tape to firmly settle your cable cover without damaging your walls; Or you can choose screws and anchors to keep your cable in place
• Keep Your Kids and Pets from Danger; Not well management can be a huge security hazard; Bare cables may trip your family; Pets and kids may bite or play cables, more likely to cause the threat of leakage; Simply install Delamu cable cover protects your family by safely conceal your cables
• Upgraded Sleek and Stylish Raceway; This improved design will perfectly blend with any decor; Besides you can paint it to match the color of your wall; The elegant choice for hiding wall mount TV power cords; speaker wires and phone cables etc in the home & office
• Customize it Your Way; We’ve made the wire channels slim and sleek so as to perfectly blend into your home settings; You can paint the raceway to whatever color you need to match your wall and cut it to whatever length desired

User questions & answers

Question:	Do inside corners come with the kit
Answer:	Of course, pressure washer hose 50 ft will work but the larger hoses gp will go up.
Question:	Any special thing I need to do to get ready to paint
Answer:	This is 110V/1PH motor with 25 ft of cord.
Question:	Can the cover be snapped together or does it have to be slid together
Answer:	This machine comes equipped with a downstream chemical injector. It would require an optional High pressure chemical injector to use chemical at high pressure. We recommend that you run them at 140-160 degrees Farenheit.
Question:	what if I need more corners or L fittings
Answer:	Congratulations! After verification, this water inlet valve assembly compatible with Electrolux EIFLW50LIW0 washer. Thanks.

Product features

Hiding Your Ugly Cables For Any Room

• Home Entertainment Systems
• Speaker Cables
• TV Cables
• Home & Office Wiring
• Computer Cords
• Ethernet Cables

Pay Attention

• The tape could not be used on textured walls.
• Our tape is very strong, you'd better plan the route before installation. However, If you have to remove the tape, pls warm up the tape with a blow dryer or heat gun before removing it. then it will be easily peeled off.

Hide The Sight Out Of Sight

Improving the look of your home. After being painted, they just disappear into background, in other words, they are not a huge eye sore.

Keep Your Family Safe

Keep floor lamp cables and other electrical cords out of sight, and out of children's reach with this cable management system.

Slip The Cover Close Easily

You will get various connectors with our kit, you can use them when you need, and hide the cables in then slip the cover closed easily.

Two Installation Methods

Use our stronger self adhesive tape to firmly settle your cable cover without damaging your walls. Or choosing screws and anchors to keep your cable in place.

• Made in USA. Use with Sealproof straight or right angle connectors; can be used with any Type B mettalic or nonmettalic conduit connectors. 50% lighter than metallic conduits, no sharp edges or burrs
• Resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments; resists abuse, pull and crushing; outdoor, sunlight resistant, direct burial.
• Applications: HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment, transformer connections, outdoor lighting
• Made from high quality virgin PVC. Smooth inside for easier wire pulling, no hazardous sharp edges or burrs, will not damage conductors. Light weight and lower installed cost. Quick installation, cuts with utility knife or PVC cutter. Integral rigid & flexible PVC construction
• UL Listed Underwriter's Laboratories File No. E-129973; UL Rating: 80°C dry, 60°C wet. 70°C oil resistant. CSA Certified, Candian Standards Association File No. LL-84705, CSA rating - 18°C to 75°C

User questions & answers

Question:	Will this fit over a number 6/4 wire
Answer:	Unfortunately, that would not be recommended.
Question:	What's the ID
Answer:	There is a winterization process when not in use to run antifreeze through coil and pump. You can call 1-800-315-5533 for more details.
Question:	Can you use lubrication when pulling the wire and if so, what kind of lubrication
Answer:	#2 Furnace oil is recommended for the burner oil tank, as it burns cleaner and the burner requires less maintenance. Diesel fuel may be used as an alternative.
Question:	How do you cut the conduit
Answer:	Yes, 3/8 pressure washer hose working pressure is 4000 PSI; Burst Pressure is rated to 16000 PSI.

• 8x6 Inch kitchen conversion chart magnet. Easy to understand data and images will allow you to convert measurements on the fly when cooking, baking or measuring. Increase your kitchen efficiency and convenience.
• Gloss water-resistant finish is easy to wipe clean. It’s easy-to-clean surface will have it looking brand new almost instantly. Extra strength magnetic backing holds strong on all magnetic surfaces. Conversion chart decor for the kitchen, cooking and baking. Stick easily so you can access it quickly and hands-free.
• Convert measurements of dry & liquid weights, volumes, temperature Celsius to Fahrenheit, keto and more. Your hands-free guide for imperial to metric and standard. Interpret recipes quickly for cooking and baking.
• Perfect Gift for bakers, chefs, housewarming, new homeowners, cooks, mom, etc. Easy to understand table for recipe, baking tools & makes the perfect cookbook accessories.
• Designed and manufactured by Momo & Nashi. Original design, made for functionality and style. Clean & timeless, made to stand the test of time as a stylish accent to your kitchen. Order Now.

Product description

The Sealproof Power Whip Assembly is assembled with all UL components. Designed for easy installation, it resists corrosion, oil, and water, as well as being sunlight and outdoor resistant. A time and money saving convenience for installation of your A/C hook up.

• Whip is assembled with all UL components. 10/3 Wire
• Designed for easy installation
• Resists Corrosion, oil and water; Outdoor, sunlight resistant.
• Lower installation cost and a time saving convenience.
• Applications: Air condition unit hook up; heat pumps; pools; spas; outdoor lighting; motors and controls; solar panels

User questions & answers

Question:	What would I need to connect this to half inch grey pvc conduit
Answer:	Yes, the cutoff discs , or wheels, will cut bolts. I prefer to use a diamond cutoff disc in mine. It cuts bolts very nicely. Of course, that's just my preference. Use the stone-like cutoff wheels, or the diamond cutoff discs, as YOU prefer.
Question:	Can this be used indoor to hook up a water heater timer
Answer:	On the upper handle most of the time on the lower part no it depends of the length of the seal , it cuts wire seal beautiful
Question:	Isn't this 10/2 not 10/3? I thought 10/3 was red/black/white/ground
Answer:	It useully takes 1 to 2cuts on the hard security bolts. We have to charge the battery every 3 to 4 weeks depending on the use . We use it a few times a day.
Question:	Is this stranded wire
Answer:	It comes with two batteries and a charger

Product description

Features:



Large quantities:

The package comes with 8 pieces cable connectors, enough to meet your daily work needs, improve work efficiency, and create a relaxing life.



Strong corrosion resistance:

The clamp type cable connector consists of zinc alloy material, with strong corrosion resistance and long service life.



Specifications:

Material: zinc alloy

Color: silver

Quantity: 8 pieces

Size: 1/2 inches, 3/4-inch



Package includes:

8 x Cable connectors



Note:

Please confirm the size before buying.

Small parts, please keep the tools away from little kids.

Manual measurement, please allow slight errors on size.

The colors may exist slight difference due to different screens, please understand.

• A variety of quantities: there are 4 pieces 4 1/2-inch and 4 pieces 3/4-inch cable connectors in the package, enough to meet your replacement and use needs in daily work, and better cooperate with you to complete the work
• Durable material: wire connectors are made of zinc alloy material, not easy to rust, durable and practical, can be applied for a long time after heat treatment, and with the corrosion-resistant zinc die-cast structure
• Sturdy metal structure: cable connector kit has metal structure, which ensures mechanical protection of the raceway, protects your wires from damage, and prevents hazards of leakage, safe and sturdy
• Screw strap design: 650XY2 clip-on connector has 2 screw straps and flexible conduit FTGS; It is a service entrance cable accessory, but not a metal cable; The cable size is 14 awg, and the shooting distance is about 1/2 inch and 3/4 inch
• Size information: the cable connector clamp is about 1/2 inch and 3/4 inch, please pay attention to whether it meets your daily work and cooperation needs before buying to prevent wrong purchase

Product description

Arlington LPCG50-100 Low Profile Strain Relief Cord Connector, 1/2 Inch. Arlington, LPCG50-100, 1/2 inch non-metallic low profile cord grip. Arlington's low-profile, strain-relief-cord grips have the widest cord rang in the industry! And the unique internal design of the connector assures a liquid-tight and oil-tight seal, as will as superior pullout resistance. By simply tightening the nut inch hand tight inch, the grommet constricts on the cord or cable, locking it firmly in place.

• Trade Size 1/2 Inch
• Liquid-tight and Oil-tight
• Sold in package of 100
• UL listed
• Fits cable sizes 200 - .472-inches

User questions & answers

Question:	is this for PVC coated wires
Answer:	This model does not have a gearbox, however, we do offer another model that does. The gearbox slows the rpm down to the pump so your pump does not have to work as hard. In a direct driven unit the engine rotates at 3600rpm and so does the pump. In a gearbox set up the engine rotates at 3600rpm and reduces down to about 1750rpm thru the pump.
Question:	in. knockout question. Will this one work with a submersible water pump[for a garden water fountain] with a round 3/8" O.D. power cable w/o leaks
Answer:	It is an EP1313G8
Question:	Is the color as pictured, Silver/Gray
Answer:	Yes but it needs to be gravity feed unless you order the model with the gearbox option.
Question:	How many items in a pack
Answer:	Yes you can Fill fuel tank with kerosene, diesel, or #2 fuels.

Product description

Alflex-Type RWA 1/2-Inch Reduced Wall Aluminum Flexible Metal Conduit. High Strength Aluminum Alloy Strip. 5/16-Inch is UL Recognized Component. UL Listed in sizes 3/8-Inch to 3-Inch. 600-Volt. Alflex Type RWA is manufactured with a lightweight, high strength aluminum alloy. UL Listed per UL 1, Standard for Safety for Flexible Metal Conduit, ANSI/UL-1. Meets federal specification WW-C-566c. NEC Type Designation-Article 348, Type FMC flexible metal conduit. Alflex Type RWA Reduced Wall Aluminum Flexible Metal Conduit is suitable for the following installations: Environmental air-handling spaces per NEC 300.22C, Power and lighting branch circuit conductors and cables for connecting receptacles, luminaires, equipment, office partitions, etc., Metal raceway for wires and cables per NEC ANSI/NFPA-70 Article 348, Motor feeder, branch, and control circuit conductors and cables, Class 1, Class 2, Class 3 Remote-control, signaling, and power-limited circuit conductors and cables, Fire alarm system conductors and cables of power-limited or non-power-limited fire alarm circuits, Voice, data, communications and video cables including CATV and optical fiber cables, Concealed or exposed installations per NEC Article 348 and the applicable NEC provisions, Elevators, hoistways, and escalators per NEC 620.21, As a grounding conductor for lengths up to 6-Feet 20A max as per 2008 NEC 250.1185, Electric signs and outline lighting per NEC 600.7, 600.31 1000-Volt or less, and 600.32 >1000-Volt, Hazardous location, Class 1, Div. 2, for flexible connectors only per 2008 NEC 501.10B2 and 501.30B, UL 1, 2, and 3 Hour Through-Penetration Firestop Systems: C-AJ-1462, C-AJ-1463, C-AJ-1464, W-L-1308, and W-L-1309, Listed wired fixtures per NEC 410.77C, Raised floors for connection of information technology per NEC 645.5D2 and 645.5D, Places of assembly and theaters per NEC Articles 518 and 520, Cranes and hoists per NEC 610.11C.

• 25-foot 1/2-Inch high strength aluminum alloy construction provides mechanical protection for conductors and cable
• For use with listed connectors intended for NEC Type FMC (Flexible Metal Conduit)
• Cuts 80-Percent faster than steel and is 66-Percent lighter than steel
• Smooth interior for easy wire pulling
• Superior corrosion resistance and built in flexibility for simplified positioning

User questions & answers

Question:	Can this be split down middle for car wires
Answer:	Mine arrived in a box that said "Made in Japan" on it. The tool itself (Klein 30" w/steel handles) does not indicate point of origin in any way. It seems high quality but not "Made in USA". One reason I bought it was the understanding, from commenters, that it was made in USA. When I found that it was not made in USA, efforts to return it were abandoned when I learned that a 20% restocking fee would be charged and postage was on me. :(
Question:	What do you cut this with? Do I need to get a hacksaw, or will utility scissors do it
Answer:	yes
Question:	Is this conduit liquid tight/water proff
Answer:	Cutting and grinding discs are the hardest materials known, after diamond. So, yes, the discs will cut pad locks. You can use the hardest material, diamond, to make the cuts even quicker. Check out a 3" diameter diamond disc, with a 3/8" arbor.
Question:	How many feet is this roll
Answer:	not recommended, but you can just get special disc that used for tiles any disc you use with tiles requires a water to be added or you could burn the tile not recommended

• Made in USA. Use with Sealproof straight or right angle connectors; can be used with any Type B mettalic or nonmettalic conduit connectors. 50% lighter than metallic conduits, no sharp edges or burrs
• Resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments; resists abuse, pull and crushing; outdoor, sunlight resistant, direct burial.
• Applications: HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment, transformer connections, outdoor lighting
• Made from high quality virgin PVC. Smooth inside for easier wire pulling, no hazardous sharp edges or burrs, will not damage conductors. Light weight and lower installed cost. Quick installation, cuts with utility knife or PVC cutter. Integral rigid & flexible PVC construction
• UL Listed Underwriter's Laboratories File No. E-129973; UL Rating: 80°C dry, 60°C wet. 70°C oil resistant. CSA Certified, Candian Standards Association File No. LL-84705, CSA rating - 18°C to 75°C

User questions & answers

Question:	I need 150 ft of conduit, are there any connectors for joining two lengths of conduit
Answer:	I use for fencing. I have two of them. Very durable but like any of my tools I don't abuse them. I wouldn't pry on these you could ruin the jaws. However cutting screws every so often shouldn't hurt them. Great tool.
Question:	How deep does this need to be burried
Answer:	I would say Yes.....I love these mini bolt cutters. I use them to cut 9 gauge wire which is very stout. You would be surprised the ease in which they cut various materials.
Question:	Are the walls compliant with Schedule
Answer:	Sorry, I haven't the slightest idea.
Question:	Can this conduit be placed underground
Answer:	These are amazing to use. Im actually going to buy another pair today. Just to have two in handy. Works very well for cutting exactly what you want.

Product description

RACO Squeeze type Connectors are 1/2 In. Trade size. The connectors are for use in dry locations to connect Nonmetallic Sheathed Cable (MNSC) to a box or enclosure. The connectors are uninsulated.

• Rugged metallic construction insures mechanical protection for the raceway
• Corrosion resistant zinc die cast construction
• NMSC Wire - #14 - #10, #14, or #12 with or without ground
• UL CSA listed

User questions & answers

Question:	What type of connector do I want for armoured ( metallic) 14/2 electrical cable? and what are the trade names for said items
Answer:	Hello, The part number for your model I'm showing is 5221ea1008f Thank you, Crystal Customer Service Team AppliancePartsPros
Question:	Are these supposed to actually be 1/2 trade size as listed? I see a few people getting 3/8 in reviews.. is that fixed
Answer:	yes
Question:	Will these fit in the bottom of a garbage disposal
Answer:	Yes, the water inlet valve will fit model# wm3470hva. The hot water valve is part# 5220FR2006A.
Question:	What is the outside diameter of the threads for this connector? I am looking for a fitting to install in a 7/8” hole
Answer:	This valve is exactly what it replaces. Exact fit. Don’t need to know any technical term or complicate it.