• ALL IN ONE and EASY TO USE: Works as a USB sound card plus mixing station. Integrating audio mixing equipments into 1 comprehensive solution. It delivers superb sound quality and offers intuitive and full control to optimize vocal and sound effects. The S1 Bundle comes with a condenser microphone that let you start podcasting or live streaming easily in no time. Start recording when you plug into the smartphones or PC.
• SPECIAL EFFECTS: Four user recordable, eight Built-in special audio effects, and various adjustments available for your creation. Fixed audio effects like APPLAUSE, LAUGHTER, CHEERING...Note please record your own audio effects you like to audio interface according to the instructions.
• BORN FOR LIVE STREAMING: MAONO DJ mixer controller supports up to 2 person, 4 devices and 4 platforms to stream simultaneously. Highlights of this set, you can change your voice to the male, female, girlish, robot. Two mic inputs, One Accompaniment input, and real-time monitoring, good noise reduction effect after pressing DENOISE button. It is compatible with IOS and Android systems.
• START YOUR OWN CONCERT: 10-step reverb & 12-step electronic music & 3 modifiable tones (Treble, mid-range, bass) make this audio interface more entertaining and meet more live recording needs.
• PACKAGE LIST: 1* MIC, 1* Mic Cable, 1* Mic tripod, 1* windscreen muff, 1* Audio interface mixer, 1* Charging cable, 3* 3.5mm TRRS Audio Cable, 1* User manual. We provide a 12-Month warranty. For a better user experience, please download more instructions below and read user manual before setting up. Maonocaster Lite AM200 only supports 3.5mm microphone input and does not support phantom power. The included microphone is forbidden to be used with phantom power.

User questions & answers

Question:	Can I use it with phantom power
Answer:	We found that if you have the GoXLR, and a USB headset, that we can still get the sound over. Put a 3.5mm to 3.5mm cord from the headset output on the GoXLR, and into the Line In port on the back of a computer. Then, use the 'Listen to this device' option in the sound settings to redirect sound from 3.5mm Line In, and output to the USB headset. Can use a guide like https://www.tenforums.com/tutorials/126383-listen-microphone-through-playback-device-windows.html to see the process. Couple things to note - If you hear a buzzing or feedback, you may need to get a quality 3.5mm Ground Noise Loop isolator, and be sure to get a quality 3.5mm cable, otherwise the sound may sound a bit degraded.
Question:	Is this capatible with Chromebook? And what mix apps on chromebook do I need for this
Answer:	Yes, pretty easily I might add.
Question:	Can I connect a smartphone via Bluetooth to do a phone interview on a podcast, all the while that person hear me and my listeners hear that person
Answer:	Yes, it supports 70 Db of gain in addition to the phantom power. So it can run nearly and microphone you throw at it.
Question:	Will this work with a usb microphone
Answer:	Currently, windows only.

Product description

The simplest model in the range, the third-generation Scarlett Solo provides singer-songwriters with a reassuringly easy recording process. Equipped with high performance 24-bit/192kHz AD-DA converters, Scarlett S the same professional sound quality throughout the third-generation range. Its features include a single upgraded third-generation Scarlett mic preamp: with a switchable air setting to reproduce the air effect of Focusrite's original ISA mic preamp, giving your vocal recordings a brighter and more Open sound. The high impedance, high-headroom instrument input allows you to record guitar or bass without any clipping or unwanted distortion, while gain Halo metering makes it easy for you to set the input level. And Scarlett Solo's balanced outputs are hum-free when connecting studio monitors with balanced inputs, so you’ll always have pristine audio playback. Scarlett Solo is designed to stand up to days on the road and connects straight to your Mac or PC via USB cable, with no external power required. It comes with all the software tools you need to get started, including two comprehensive digital audio workstations: Ableton Live Lite and pro Tools first Focusrite creative pack. Intuitive enough for beginners yet advanced enough to inspire real creativity with great-sounding effects. Focusrite has partnered with Splice to give 3rd Gen. Interface owners a free month Splice sounds subscription when setting a new Splice account. Splice sounds offers millions of high-quality, royalty-free one-shots, loops, and presets, with new releases daily from your favorite producers, sound designers, and artists. Creators use Splice to make all kinds of music, including chart-topping pop, Grammy-winning albums, underground mixtapes, and cinematic scores. As with all Focusrite products, you’ll also benefit from a two-year, award-winning customer support, and membership of their plug-in Collective offering free software downloads and generous discounts. Interested in what headphones are compatible with Scarlett? Search 'Headphones' on the Focusrite help centre for more information.

• One of the best performing mic preamps the Scarlett range has ever seen, now with switchable air Mode to give your recordings a brighter and more open sound. One high-headroom instrument input to plug in your guitar or bass. Two hum-free balanced outputs provide clean audio playback.
• High-performance converters enable you to record and mix at up to 24-bit/ 192kHz.
• Quick start tool to get up and running easier than ever.
• Includes Pro Tools | First Focusrite Creative Pack, Ableton Live Lite, Softube Time and Tone Bundle, Focusrite’s Red Plug-in Suite, 3-month Splice subscription, and your choice of one free XLN Addictive Keys virtual instrument, all available via download upon purchase and registration
• LIMITED TIME OFFER: FREE Klevgrand DAW Cassette upon registration and download.

User questions & answers

Question:	Is the headphone jack on this for monitoring your inputs, or does your PC audio come through it aswell
Answer:	Hi, You can monitor your inputs and listen to playback from your computer simultaneously, which allows you to create overdubs with next to zero latency. You can either choose to monitor the inputs using the Direct Monitor switch, or you can use the Input Monitor feature in your DAW. If using the Direct Monitor feature the input signal will be passed directly to the line and headphone outputs, whereas if you use the Input Monitor feature in your DAW, you will be hearing the audio you're recording back from your DAW. In either case, you can still hear any other audio playing back from your DAW at the same time as recording. Best regards, Laurence Clarke // Focusrite Technical Support
Question:	What type of usb cable does this come with? is it a type-c to type-c or a type-c to type-a
Answer:	Hi, This comes with a type-c to type-a cable. If you have type-c ports, you will need to purchase a type-c to type-c USB cable separately. Best regards, Laurence Clarke // Focusrite Technical Support
Question:	Does the XLR input only record audio to the left side
Answer:	Hi, When recording a single microphone, you should ensure that you create a mono audio track in your DAW instead of a stereo audio track. When you record onto a mono audio track, the output from that track will be heard on both sides of your headphones or speakers (ensuring the output is set to stereo), however, if you record onto a stereo track, the audio will just be recorded onto the left side of a stereo file and you will ony hear it on the left of your headphones/speakers. This is explained in more detail here: https://support.focusrite.com/hc/en-gb/articles/206849779?flash_digest=62885ef974b4eb116f3b3ea2c9b9c38ddb871473 Best regards, Laurence Clarke // Focusrite Technical Support
Question:	can this power 250 ohm headphones
Answer:	I have a 650 , 300 ohm and it's enough to play it at okay volume but not enough to power it completed I'm looking at an Amp to pair this with

Product features

The perfect audio interface for a singer-songwriter

You’ve found the simplest USB audio interface we make. If you want to start creating studio quality recordings with your guitar, the 3rd Generation Scarlett Solo provides an easy way in.

• 🎤【USB Output】Enables simple setup. USB Microphone Kit provide a direct convenient plug-and-play connection to Mac and Windows computers without any additional hardware for recording vocals, podcasts and Skype. It's never been easier to get high-quality sound for your voice and computer-based audio recordings.(◆◆Not compatible with Xbox and Phones◆◆)
• 🎤【Excellent Sound Quality】With rugged construction for durable performance, the vocal microphone offers a wide frequency response and handles high SPLs with ease.Ideal for project/home-studio applications.The cardioid condenser capsule offers crystal-clear audio for communicating, creating and recording.Comes ready to go with a desktop mic stand and 2.5M USB cable,you're guaranteed to get great-sounding results.
• 🎤【Durable Arm Set】Studio Microphone with versatile and sturdy broadcast suspension boom scissor arm gives you great tools for capturing your voice in a podcast or voiceover.The Double Pop Filter provides two layers of dissipation, removes the rush of air caused by vocal plosives,minimizing the popping sounds that can compromise your recording is great for studio as well as home use.
• 🎤【Easy to Attach】The streaming microphone adjustable boom studio scissor Arm Stand features a heavy-duty combo mount that consists of a sturdy C-clamp and a detachable desktop mount.With 13" fixed horizontal arm and offers a 30" reach.The low-profile,table-hugging design allows on-air talent to perform without facial obstruction to record podcasts or make dubbing sounds for videos, use voice chat in online games or doing business on Skype.
• 🎤【The Accessory Package Includes】The scissor arm stand is made out of all steel construction, sturdy and durable.a studio-grade shock mount,a double pop filter, premium 8.2' USB cable,a bonus tripod stand, a microphone for podcast recording, a user manual and free Technical Support. One Year Warranty to 2-year extended warranty with online registration.

Product description

For a more precise control and enhancement of your sound, XU models of the MG Series come equipped with a suite of Yamaha's renowned SPX effects. Featuring high-resolution Chorus, Flanger, Distortions, Reverb and Delay, all with editable parameters, these are the same multieffects processors used on Yamaha's high-end mixing consoles, giving you the tools you need to elevate your mixes to a higher plane. Yamaha has always strived to provide sound engineers with the purest possible signal instead of added processing or color to give it a "signature" sound, and the MG Series is no exception. Embracing this philosophy of transparent sound, these mixing consoles deliver a level of sonic purity and sound quality that is unmatched in their class.

• 10 channel mixer with USB and SPX digital effects
• Featuring studio grade discrete class A D PRE amps with inverted Darlington circuit providing fat, natural sounding bass and smooth, soaring highs
• 3 band EQ and high pass filters give you maximum control and eliminate unwanted noise, resulting in a cleaner mix
• 1 knob compressors allow easy control resulting in livelier guitars, punchier bass lines, a tighter snare and a cleaner vocal sound
• MG Series mixers feature a rugged, impact resistant, powder coated metal chassis; Equivalent input noise 128 dBu, residual output noise 102 dBu
• Note: Please refer to the user manual before use
• Dimensions(W×H×D): 244 millimeter x 71 millimeter x 294 millimeter (9.6x2.8x11.6 inches)

User questions & answers

Question:	Can I add echo and reverb at to the mic
Answer:	Hi. Any of the onboard effects will work with the with Mic channels. One effect at a time, though.
Question:	Is this mixer capable of "mix minus" configuration? If so how is it done? I cant seem to get it to produce any audio from the "fx send" port
Answer:	been trying to determine this for my own setup. thus far it seems No as the AUX is post fader. im trying to isolate the mic on the FX send and have it removed from the main mix.. nothing seems to allow this to happen. i can get the FX send to work but if the usb and the FX send are connected to the same source, both signals carry the mic audio...
Question:	Can this do multitrack recording
Answer:	This is a mixer and not any type of recording device. This operates on USB and does not have any recording capability built-in. This is used to record multiple sources at one time and make that into one Stereo/Mono audio output that can be used with a recording software, streaming software, or even a live speaker system. You can record the main output via computer, but even then, this will all be one audio stream, not one for each separate channel.
Question:	who made it
Answer:	Probably someone who works for Yamaha.

Product features

Yamaha MG Series Mixers

For more than a century, Yamaha has been building a legacy of superior craftsmanship and innovation exemplified in all of our products, from an unrivaled catalog of world-class musical instruments to touring-grade professional audio. Now in its third incarnation, the MG Series embodies this pursuit of design excellence, and incorporates some of the same technologies developed for use in high-end professional consoles, including studio-quality preamps, powerful digital processing, and a rugged, reliable construction.

With an intuitive, easy-to-use interface, the MG Series boasts an extensive lineup of compact mixing consoles with models ranging from six to twenty channels, suitable for a diverse range of users and applications. For installed, recording, or live music settings, the solid construction and flexible design of these consoles lets you shape your sound with confidence, continually delivering a level of sound quality and reliability unrivaled in its class.

D-PRE (Discrete Class-A Mic Preamps)

This is where it all starts. Everything you do as a sound engineer is dependent on the quality of your preamps, which determines the direction your mix will take, and ultimately how good it is going to sound. MG Series mixing consoles feature Yamaha's studio-grade discrete class-A D-PRE preamps, which utilize an inverted Darlington circuit comprising two cascading transistors in a configuration that provides more power with lower impedance.

EQ and High-pass Filters

There's nothing more useful than reliable equalization when you need nuanced management of your tone. The MG Series benefits from Yamaha's unparalleled experience in designing pro audio gear, featuring 3-band equalizers on all mono channels for precise control of your sound. High-pass filter allows you to eliminate unwanted low-frequency noise, for a smoother, cleaner mix.

1-Knob Compressors

Compression plays an essential role in just about any recording or sound reinforcement environment by altering the level of dynamics of an audio signal when you need livelier guitars, punchier bass lines, a tighter snare, or a cleaner vocal sound. However, it can take countless hours to master the complexities of even the most basic outboard compression units and use them effectively.

Built-in SPX Digital Effects

For musical and non-musical applications, effects processing adds polish and professionalism to the mix. The MG X / XU models feature Yamaha's SPX digital multi-effect processor, offering a comprehensive suite of editable digital effects perfect for enhancing your mix, whether adding depth to a speaking engagement or breathing new color and atmosphere into a live performance.

High Quality Sound Op-amp

The head amp determines sound quality, and op-amp integrated circuits are one of the most important parts in the head amp circuit. MG Series mixers feature new, high-quality, custommade MG01 op-amps that we developed in cooperation with the semiconductor manufacturer. We worked directly with the semiconductor manufacturer to focus on sound quality first.

Product description

The all metal DB DISPLAY MKII decibel display from American Audio is for monitoring your sound volume. It also creates a great light show in your amp rack. Make sure your speakers stay in great shape by keeping those dBs under control through this monitoring system. The LED display progresses from green through amber, to red. There are two different operating modes: Dot or Bar. A 5V power supply is included so you can get the unit plug in an running right away. The DB DISPLAY MKII is perfect a stage, church, club or bar install or for a mobile entertainer.

• Designed to set in an amp rack to view your decibel level and Creates a great light show in your amp rack
• Display progresses from green through amber to red and Sensitivity adjustment on both left and right channels
• 2 separate modes: dot and bar and Includes 5V power supply
• Line Inputs: Left & Right RCA / Left & Right XLR and Line Outputs: Left & Right RCA / Left & Right XLR
• Voltage Operation: DC 5V, 500mA Power Supply included and Dimensions: (LxWxH): 19” x 1.75” x 1.75” / 44.5mm x 483mm x 44.5mm

User questions & answers

Question:	I want to use on a dedicated subwoofer amp. What is the frequency response of this unit
Answer:	Frequency response does not matter. This unit is a meter that measures signal strength/level - which is apples and oranges to frequency response. It will work fine with your subwoofer but don't hook it up to the power outputs from the amp - hook it up to the signal going into the power amp.
Question:	Can you hook xlr to rca(for the stereo receiver)? True probably go just rca ro rca but that wont be as much fun
Answer:	Yes, XLR is positive, negative and shield. Depending on signal direction. If xlr to rca shield would only connect at xlr. If rca to xlr shield would be connected to rca negative post. When shield is connected to sorce connector only it creates a shield to block interference along the cable.
Question:	So which 5v power supply is included? (usa
Answer:	Standard . 5v to 120v
Question:	Can this be used with a bass amp
Answer:	Be warned... it is NOT accurate (flat) with regard to bass frequencies. It works down to around 50 Hz, but at 30 Hz response is down and at 20 Hz it's WAY down. Something to be aware of.

Product features

DB Display MKII

The all metal DB Display MKII decibel display from American Audio is great for monitoring your sound volume. It also creates a great lightshow in your amp rack. Make sure your speakers stay in great shape by keeping those dBs under control through this monitoring system.

The LED display progresses from green through amber, to red. There are two different operating modes: Dot or Bar. A 5V power supply is included so you can get the unit plug in an running right away. The DB DISPLAY MKII is perfect a stage, church, club or bar install or for a mobile entertainer.

Product description

When it's time to make recording history, You need the best audio interface you can get, and you need one you can count on. That's why BEHRINGER has introduced the new U-PHORIA series USB Audio interfaces. With 4 unique models to choose from, the U-PHORIA series has the ideal Interface to make your recording experience legendary. Midas-design preamps Midas developed the world-class preamps for the UMC204, UMC202 and UMC22 interfaces and thanks to the available +48 V phantom power, you can even use professional-grade studio condenser mics to create outstanding tracks. 96 kHz precision The U-PHORIA series offers the user The ability to switch between 48 kHz and 96kHz. Both sampling rates offer better than CD recording quality for professional results. Convenient monitoring the um-2 provides power phones output with level control, direct monitor selecting, status, signal and clip LEDs which is all powered through the computer USB port. BEHRINGER offers free audio recording, editing and broadcasting software including 150 instrument and effect plug-ins available at on their website. Compose. Record. Mix.Share. For composing, recording, editing, mixing and sharing music, traktion is included with the purchase of the um-2. This DAW features a single-screen interface with features such as dynamic automation, unlimited track count, MIDI recording and support for VST and AU plug-ins. Register your U-PHORIA UM2 at Behringer.Com, and they'll reward you with a complimentary download code for the full version of traction 4. Recording and editing couldn't be easier. Features: 2x2 USB Audio Interface for microphones and instruments audiophile 48 kHz resolution compatible with popular recording software including Avid Pro Tools, Ableton Live, Steinberg Cubase, etc. Streams 2 inputs/ 2 outputs with ultra-low latency, supporting Mac OS X and windows XP or higher +48 v-powered Xenia mic preamp comparable to stand-alone boutique preamps powerful phones output with level control and direct monitor select status, signal and clip indications for perfect overview USB port for connection and power free audio recording, editing and broadcasting software plus 150 instrument/effect plug-ins.

• 2x2 USB audio interface for recording microphones and instruments
• Audiophile 48 kHz resolution for professional audio quality.Maximum Sampling Rate: 48 kHz
• Compatible with popular recording software including Avid Pro Tools*, Ableton Live*, Steinberg Cubase*, etc.
• Streams 2 inputs / 2 outputs with ultra-low latency to your computer, supporting Mac OS X* and Windows XP* or higher
• State-of-the-art, +48 V-powered XENYX Mic Preamp comparable to stand-alone boutique preamps

User questions & answers

Question:	It appears that phantom power gets switched on all 4 mic pres simultaneously. Can I use dynamic & condenser mics together without causing damage
Answer:	Because the one in the front is NOT powered. The rear inputs can power mics or active pickups, up to 48v. I run 9v batteries in all my active guitars, so they're already powered, so I just run all my guitars into the front input. If I'm recording my 4x12 cab, I use the XLR in the back with my SM57.
Question:	will this power a microphone that requires phantom power? sorry if this is a dumb question, im new to XLR microphones
Answer:	Your question has me curious. The data speed for this device will not get close to the rates requiring a cable with the thunderbolt 3 type throughout. The audio stream will get there just as fast with their stock cable and with a reasonably priced ($6-10) usb type c cable. The nicer cables are more about throughput than latency.
Question:	Can it write four tracks simultaneosly
Answer:	Audio is routed from the computer through USB-C to Evo. There are two 1/4” outputs on the back of the Evo to plug into speakers.
Question:	Does this include a usb power cable that goes from the interface to the computer
Answer:	My interface remembers its gain settings when rebooting. Both when I power cycle the unit and when my computer power cycles. Make sure you download the most up to date drivers for it.

Product features

U-Phoria UMC404HD

The incredible U-Phoria UMC404HD bridges the gap between your creativity and your fans. This blazingly fast USB 2.0 studio in a box will have you recording your next masterpiece in minutes with all the connectivity required for your microphones, guitars, keyboards and even MIDI devices.

Record the perfect vocal right to your computer-based DAW thanks to the 4 astonishingly pure, world-class MIDAS-designed mic preamps, which include +48 Volt phantom power for condenser microphones, all going through studio-grade 24-Bit/192 kHz converters for the best possible sound quality. Whether you’re a singer-songwriter, producer on the go, or just need a rock-solid interface for running backing tracks at a gig, the ultra-dependable U-Phoria UMC404HD will help you shine in the digital domain.

Studio in a Little Black Box

When it’s time to make recording history on your Mac or Windows computer, plug in microphones, instruments or line level sources to the UMC404HD’s 4 combination XLR/TRS inputs for the ultimate in studio flexibility! Connect and communicate with MIDI devices to add the benefit of control surfaces to your studio workflow.

192 kHz Precision

You take your tracks seriously, and the UMC404HD respects that, providing up to 192 kHz resolution for even the most demanding applications in music as well as video post production. Work with confidence and accuracy in your favorite recording software for professional results every time.

MIDAS - The Legend in Sound Quality

Ever since its formation in the 1970s, MIDAS has had a long history of innovation in the world of audio mixing consoles. Employed by the most famous touring acts and installations world-wide, legendary MIDAS consoles such as the XL4 and Heritage H3000 quickly became industry standards.

Zero-Latency' Monitoring

The UMC404HD mix control allows zero-latency direct monitoring, which means musicians can experience their performance clearly – with no delay or lag in the returning signal, resulting in a better performance and recording. A powerful phones output has its own level control and Monitor A/B source select for DJ-style cueing.

Getting Connected

On the rear panel of the UMC404HD, you’ll find the USB 2.0 port for simple and easy connection to your computer, along with plenty of analog playback options including ¼" TRS, RCA and XLR. The UMC404HD also features 4 analog Inserts for use with external effects such as compressors, gates and EQs, etc. Built-in MIDI I/O allows you to connect keyboards and all your favorite outboard MIDI hardware.

Tracktion - Record, Edit, Mix and Share

Tracktion is one of the world’s fastest and easiest Digital Audio Workstations (DAW) for composing, recording, editing, mixing and sharing your music with the world. Featuring a single-screen interface, and pushing the envelope in design elegance, Tracktion brings together outstanding Pro DAW features, such as dynamic automation, unlimited track count, MIDI recording and support for VST and AU plug-ins. This powerful music production software gives you all the tools of an entire professional-grade recording studio. Learning a DAW has never been easier, thanks to their vast and readily available library of resources.

Everything You Need to Sound Amazing

The U-Phoria UMC404HD is a powerful 4 input, 4 output USB recording interface featuring genuine MIDAS-designed mic preamps with exceptional 24-Bit/192 kHz high-resolution converters, designed to help your recordings and mixes sound their absolute best.

Product description

The Tascam DR-60DmkII 4-Channel Portable Recorder for DSLR is the new audio recording solution for on-set filmmakers and videographers using DSLRs. For years, filmmakers have been trying different methods for recording audio - including the use of bulky recorders designed for music and trying to transform the inferior audio technology built-into DSLRs. Now TASCAM has designed an answer that pros and amateurs alike have been waiting for. The DR-60D is a brand new 4-track solid-state recorder utilizing TASCAMs decades of experience. The recorder utilizes high-grade HDDA pre-amps, legendary AD converters, and a durable but lightweight structure and shape. This device will fit snuggly under any camera or into any rig, and record up to 96kHz/24-bit high quality audio straight to SD/SDHC media. Filmmakers have at their disposal two 1/4"-XLR Locking Combo MIC/LINE Inputs, 3.5mm Stereo MIC Input, Camera In, Camera Out, Line Out and Headphone Out. Both 1/4"-XLR Combo Inputs supply +48V Phantom Power and the 3.5mm Input supplies Plug-In Power for microphones requiring a bias voltage. The DR-60D is incredibly easy to use, employing TASCAMs very popular user interface and external controls for every major operation. The body structure, soft-touch keys and dials are designed specifically to help eliminate handling noise. The multiple record modes include, 4-Channel Record, Auto Record and TASCAMs Dual Record "Safety Track" Mode make the DR-60D one of the most versatile recorders on the market. Quality mic preamps are a necessity for quality sound. The DR-60DmkIIs HDDA mic preamplifiers (High Definition Discrete Architecture) employ discrete circuitry and parts, approved after months of evaluation testing by Tascam. The HDDA s circuit achieves a high equivalent input noise (EIN) of -120 dBu for low input noise. The DR-60DmkII mic preamps have been upgraded from their predecessor for up to 64 dB of gain with XLR input jacks for greater cable comp

• ENSURE YOU BUY GENUINE TASCAM PRODUCTS! Products from sellers which say ‘fulfilled by Amazon’ under the price MIGHT NOT be an authorized TASCAM reseller, and might not be selling genuine TASCAM products which would forfeit any manufacturer warranties.
• Fits perfectly under a DSLR camera rig, without relying on bulky recorders or the limits of the camera’s microphone in
• Record up to 4 channels at a time to the internal SD Card, at up to 96kHz/24-bit WAV file resolution
• Two mic inputs utilize locking XLR connectors with 48V phantom power; the other two use a 1/8” stereo connector for wireless and lav mics
• The channel 3/4 input connector supports a high-level maximum input – up to +10dBV
• The upgraded HDDA preamps provide up to 64dB of gain and some of the lowest noise levels available

User questions & answers

Question:	Says it does 4 channel recording. It takes 4 individual channels and combines them to 2 stereo channels. Is there a way to maintain 4 separate channe
Answer:	Hello, Yes, you can use the Scarlett 18i8 (3rd Gen) with Reaper. Best regards, Jay Lilley // Focusrite Technical Support Engineer
Question:	I have a problem with the 60D not working with rechargeable batteries, even after changing the battery settings. Anyone else have this? Know of a fix
Answer:	Hello, Yes this is possible in Windows. To expose additional channels from your Scarlett interface to non-ASIO applications (e.g. Skype, Discord, Zoom, Audacity) first click the Focusrite Notifier icon in the taskbar, then click "Expose/Hide Windows Channels": Best Regards, Anthony // Focusrite Support
Question:	What's a good USB battery pack to pair with this
Answer:	The biggest change is in the headroom. These preamps and converters are cleaner and offer more gain than the 2nd gen. These pres also come equipped with the "Air" mode which adds some high end to model the ISA preamp circuit. The 3rd gen 18i20 also has 16 ADAT I/O channels as opposed to the 2nd gen's 8 channels of ADAT. The removable ears also help with portability for the engineer who doesn't want to keep the interface in a rack. If this was helpful, please consider purchasing from us (pixelproaudio on Amazon). We can help with support after the sale as well. We have it in stock and ready to ship. - Pixel Pro Audio
Question:	What's the difference between this and the previous version of the DR60D
Answer:	Hi, There have been several improvements made to the 3rd generation range of interfaces. Firstly, all of the inputs on the 18i20 3rd gen feature Air mode, emulating the classic sound of our original transformer-based ISA preamps. Secondly, the 18i20 3rd gen now has the ability to switch between Main and Alternative speakers connected to it using a front panel button. Thirdly, we have added a built-in Talkback function (allowing the engineer to talk directly to the performer), a Loopback function (allowing audio from one application to be recorded into another without connecting cables), Dual ADAT ports for recording 16 channels of audio into the DAW at 96kHz, optical S/PDIF and removable rack ears. Lastly, the specifications of the preamps and conversion have been improved even further - for example, the dynamic range has been increased to 111dB and the gain range is now 56dB instead of 50dB on the 2nd generation. Best regards, Laurence Clarke // Focusrite Technical Support

Product features

TASCAM DR-60DMKII

The DR-60DmkII is the audio recording solution for when you're on-set. It fits perfectly under a DSLR camera rig, without relying on bulky recorders or the limits of the camera’s microphone in. The upgraded HDDA preamps provide up to 64dB of gain. Record up to 4 channels at a time to the internal SD Card, at up to 96kHz/24-bit WAV file resolution. Two of the mic inputs utilize locking XLR connectors with 48V phantom power, and the other two use a 1/8” stereo connector for wireless and lav mics.

High-Quality HDDA Mic Preamps

High quality mic preamps are a necessity for high-grade sound. The DR-60D's HDDA mic preamplifiers (High Definition Discrete Architecture) employ discrete circuitry and premium parts, approved after months of evaluation testing. The HDDA s circuit achieves an incredibly high EIN (-120dBu) for the lowest noise level available. The DR-60DmkII mic preamps have been upgraded for up to 64dB of gain with new XLR input jacks for greater cable compatibility.

Soft-Touch Controls

Every aspect of the DR-60DmkII is designed specifically for DSLR Audio for Video Recording. The keys of the unit are designed specifically for quiet operation to eliminate handling noise. The Slate feature is designed to mark tracks easily while in production. The input and output layout is designed for versatile use. Whether the device is used under a camera, on a rig or strapped around a solitary sound engineer, TASCAM's DR-60D will meet all on-site audio production needs.

Ch 3 & 4 Inputs Support High-Output Microphones

The channel 3/4 input connector supports a high-level maximum input – up to +10dBV. Many microphones designed for use with video cameras have a high-level output and a 3.5mm output connector. Plug-in power is also available for microphones that need it.

Lightweight Body Designed for Rugged Portability

The DR-60DmkII's body was manufactured with very rigid plastic for a durable but lightweight design. TASCAM understands how important weight is to steady camera movement when filmmaking. In addition to its light weight, the feature-rich DR-60DmkII is extremely compact. Only 5.25" wide, the DR-60DmkII won’t interfere with camera operation. All batteries can be replaced without removing the device from the Camera or tripod / rig.

Product description

Pyle Model : PD3000BA

Home Theater Pro Audio Preamplifier

Bluetooth Home Theater Preamplifier - Audio/Video Receiver System with CD/DVD Player, AM/FM Radio, MP3/USB Reader (3000 Watt)

Features:

Audio + Video Home Theater System

Built-in Bluetooth for Wireless Audio Streaming

Connects to TVs Soundbars Speaker Systems

Powers up to Loud Speakers

Front Loading CD/DVD Player

4-Channel Receiver System

Front Panel Control Center with Digital LCD Display

AM/FM Radio with 50 Station Memory Presets

MP3 Digital Audio File Playback

SD Memory Card & USB Flash Drive Readers

Aux (3.5mm) Input Jack

Pair Speaker Terminal Binding Posts

Pair RCA (L/R) Audio Inputs

Subwoofer RCA (L/R) Output

Optical (Digital) Audio Output

1/4'' Microphone Inputs

1/4'' Headphone Jack

Video Outputs: S-Video RCA YPbPr (Component Video)

Output dB (Decibel) Level LED Display

Mic Echo Treble Bass Volume Subwoofer Controls

Built-in Ventilation Cooling Fan

Rack Mountable System

Bluetooth Connectivity:

Built-in Bluetooth Receiver for Wireless Music Streaming

Works with All of Today's Latest Devices

(Smartphones, Tablets, Laptops, Computers, etc.)

Bluetooth Wireless Network Name: PYLE

Bluetooth Version: 3.0

Wireless Range: Up to 35’ ft.

What's in the Box:

Preamplifier Receiver

Remote Control

Detachable Rack Mount Brackets

RCA Connection Cable

AM + FM Antennas

Power Cable

Technical Specs:

MAX Output Power: 3000 Watt

300 Watts x 2 @ 8 Ohm

550 Watts x 2 @ 4 Ohm

800 Watts x 2 @ 2 Ohm

Impedance: 8 Ohm

Aspect Ratio: 4:3/16:9

Video System: PAL/NTSC

Audio S/N Ratio: >90dB

Frequency Range: +/-14 dB

Integrated IC Radio Tuner

CD/DVD Disc Compatibility: DVD/CD/VCD/CD-R/CD-RW/MP4

Battery Operated Remote Control, Requires x ‘AAA’ Batteries, Not Included

Power Cable Length: 4.9’ ft.

Power: 110/220 Volt Switchable

Dimensions (L x W x H): 16.9'' x 14.6'' x 5.7'' -inches

The Pyle Home Theater Receiver provides versatile audio and video entertainment. High-Powered stereo preamplifier performance comes loaded with audio playback features including front-loading CD/DVD player, AM/FM radio, USB & SD flash memory readers, aux (3.5mm) input and two 1/4'' -inch microphone inputs. Connect external surround sound speakers to create a cinema-style media experience in your living room. Bluetooth wireless receiver ability is compatible with all of today’s latest devices and features hassle-free setup for instant music streaming. Get connected to your entire home theater system including the TV, DVD player, soundbar, subwoofers and multi-channel speakers for full-ranged pro audio stereo sound enjoyment. Rear panel connector types include speaker terminal binding posts, RCA audio inputs, dedicated subwoofer output, digital optical audio output, component S-video connector -- along with a headphone jack for private listening. MP3 digital audio file support allows you to playback your entire digital media file library while you configure your sound via the front panel button control center. Enjoy versatile audio entertainment ability with the Pyle Bluetooth Home Theater Stereo Receiver System.

​

• NOTE : PD3000BT is just an upgraded version of the PD3000BA
• 3000 WATT POWER: The Pyle 4 Channel Pre Amplifier is perfect for your karaoke and home entertainment sound system. It gives you 3000W peak power to be used for multi speakers with 2 8 ohms impedance allowing you to enjoy high quality audio
• BLUETOOTH COMPATIBLE: The professional integrated indoor house stereo receiver is equipped w/ Bluetooth wireless music streaming. Works w/ today’s latest devices including smartphones, tablets, laptops, and computers with hassle free receiver pairing
• EQ CONTROLS: The speaker sound amplifying device has crisp buttons for the audio sources and selectors, rotary knob for equalization and master volume adjustments. It also features blue LED illuminated buttons and knobs for high visibility
• DISPLAY METER: The compact and rack mount amplifier has a built in digital fluorescent display meter which displays all the functions and input used. Remote control is also included in the package for distant audio adjustments

User questions & answers

Question:	Can it be left outside under a covered patio
Answer:	Hi, yes as long as it is properly covered there. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box PD3000BA for more details. Thank you.
Question:	can you hook a turntable to this
Answer:	Hi, that will depend on your turntable specs. Sometimes you have to use a phono or preamp for connecting a turntable to a receiver. You may use one of the audio input port of the unit for your turntable. Thank you.
Question:	Does the USB have shuffle or random play
Answer:	Hi, unfortunately no. The unit doesn't have a shuffle mode feature. Thank you.
Question:	Can i connect a tv to get sound on 4 speakers at once? how does the tv connect
Answer:	Hi, you may use RCA cable connecting this receiver to your TV. You can also use Bluetooth connection if your TV has a Bluetooth feature. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box PD3000BA for more details. Thank you.

Product features

Home Theater Pro Audio Preamplifier

The Pyle Home Theater Receiver provides versatile audio and video entertainment. High-Powered stereo preamplifier performance comes loaded with audio playback features including front-loading CD/DVD player, AM/FM radio, USB & SD flash memory readers, aux (3.5mm) input and two 1/4'' -inch microphone inputs. Connect external surround sound speakers to create a cinema-style media experience in your living room. Bluetooth wireless receiver ability is compatible with all of today’s latest devices.

BLUETOOTH-COMPATIBLE

The professional integrated indoor house stereo receiver is equipped with bluetooth wireless music streaming. Works with today’s latest devices including smartphones, tablets, laptops and computers w/ hassle-free receiver pairing

3000 WATT POWER

The Pyle 4 Channel Pre-Amplifier is perfect for your karaoke and home entertainment sound system. It gives you 3000W peak power to be used for multi speakers with 2-8 ohms impedance allowing you to enjoy high-quality audio

DISPLAY METER

The compact and rack mount amplifier has a built-in digital fluorescent display meter which displays all the functions and input used. A remote control is also included in the package for distant audio adjustments

Speaker Output

Speaker Connectors to produce sound for listeners.

USB Input

USB ports allow USB devices to be connected to each other.

Cooling Fan

Expel warm air from inside.

Front Panel

Button Control Center to easily use the Amplifier.

Product description

A great choice for mobile musicians and podcasters, the 2-channel AudioBox USB 96 is bus-powered, compact, ruggedly built, and works with virtually any PC or Mac recording software. It boasts high-performance Class A mic preamplifiers and professional-quality, 24-bit, 96 kHz converters. And it comes with PreSonus’ amazing Studio One 3 Artist DAW software for Mac and Windows.

From the Manufacturer

Whether you are a musician, producer, or podcaster on a tight budget, the AudioBox USB® 96 audio interface is for you! This simple, heavy-duty, and portable little audio/MIDI interface has just the right features for basic recording needs, allowing you to plug in and start recording up to 24-bit, 96 kHz audio right away. Two front-panel combo mic/instrument inputs make it ideal for singer/songwriters, podcasters, and guitar or guitar-bass collaborations. A mix control lets you control the level between the input signal and computer playback, without hearing annoying delays. You also get a pair of balanced line-level outputs, an ultra-loud, crystal-clear headphone out, plus MIDI I/O, so you can connect your favorite synth or MIDI controller. Its screaming-loud headphone output ensures you can hear your music loud and clear, even in noisy locations. Bus-powered, built to travel, and with the most complete recording software package of any interface in its class, the AudioBox USB 96 makes recording easy—there’s no wonder why it’s our best-selling interface of all time.

• Bus-powered USB 2.0 audio and MIDI interface
• Compatible with almost all recording software for Mac and Windows
• 24-bit resolution; 44.1, 48, 88.2, and 96 kHz sampling rates
• 2 combo mic/instrument inputs with high-performance, low-noise, high-headroom mic preamplifiers
• Includes Studio One Artist DAW software and 6+ GB of third-party resources
• Includes the Studio Magic Plug-In Suite
• Frequency Response is 20 Hz to 20 kHz

User questions & answers

Question:	Are you able to monitor the output through the computer or do you need to have headphones plugged into the box itself
Answer:	You can monitor via the computer or headphones or studio monitors.
Question:	does this work with fl studio
Answer:	Yes, works well with FL Studio! No latency, after setting up drivers.
Question:	Can i save the software to add to another computer later
Answer:	Yes. In registering the Audiobox with Presonus you will create an account on their web site that you can download the software as many times as you want. And you can load it on multiple computers (no limit that I am aware of) since you can only use the device on one at a time. The free Studio One 4 Artist (an absolutely GREAT DAW by the way) can be activated on up to five different computers. (You can also deactivate them on a computer as well to keep your activations down to five.)
Question:	Does it have phantom power
Answer:	Hi, yes it does

Product features

Simple, reliable, and portable.

Whether you are a musician, producer, or podcaster on a tight budget, the AudioBox USB 96 audio interface is for you! This simple, handy little audio/MIDI interface has just the right features for basic recording needs, allowing you to plug in and start recording up to 24-bit, 96 kHz audio right away. Bus-powered and built to travel, the AudioBox USB 96 makes recording easy.

Just the right size.

The AudioBox USB 96 audio interface’s two front-panel combo mic/instrument inputs make it ideal for singer/songwriters, podcasters, and guitar or guitar-bass collaborations. Simply connect a couple of mics and you have an easy-to-use stereo recording system. A mix control lets you control the level between the input signal and computer playback, without hearing annoying delays. You also get a pair of balanced line-level outputs, an ultra-loud, crystal-clear headphone out, plus MIDI I/O, so you can connect your favorite synth or MIDI controller. The result is a simple, affordable, mobile recording solution.

Roadworthy and ready to travel.

Here is a mobile audio interface in the best sense of the term. We gave the AudioBox USB 96 a heavy-duty steel chassis so it can take a serious pounding and remain completely reliable. Its screaming-loud headphone output ensures you can hear your music loud and clear, even in noisy locations. And it’s USB 2.0 bus-powered, so you can record with it anywhere you can use a laptop. Simply drop it in your laptop bag or slap it on a tabletop.

World-class recording software included.

While the AudioBox USB 96 audio interface works with virtually all Mac and Windows audio-recording software, it comes with a free license for PreSonus’ Studio One Artist DAW, giving you a complete recording solution. Built by creative people for creative music production, Studio One is easy to learn and enables you to compose, record, and produce your masterpiece without getting distracted by the tools. Studio One also enjoys a robust online community of enthusiastic and helpful users you can turn to for advice.

• This cable is designed to connect a channel insert on a mixing console to an effects processor with phone jacks; Connecting any devices with 6.35mm (1/4’’) audio ports to AV Receiver, speaker, amplifier and other RCA-enabled devices;it can be used as a stereo "splitter", or as a "insert" cable to add an outboard mono effects device (with unbalanced RCA input and output jacks) to an effects loop.
• This cable can be flipped around, 2 RCA or 6.35mm could all be the audio input, RCA to Stereo or Stereo to RCA;It splits closer to the rca ends, the distance to the split point is 20 inchs/50cm, the red connector is right and blue connector is left.(Note:if you're input is red and white then use the blue in place of the white)
• High quality gold plated plug, Spring-style strain relief prevents cables from pulling out, corrosion resistant, 20 AWG 4N oxygen free copper wire combined with double shielding for best audio quality, excellent signal quality.
• Heavy Duty Flexible Rubber Jacket , Top quality and made by environment-friendly material, Polyethylene insulation improves high frequency response.
• 6.35mm(1/4 inch) TRS connector has 360 degree easy-grip treads for frequent unplugging and durability

User questions & answers

Question:	My dvd player only has 1 red slot no white, will it still output stereo to my mixer
Answer:	Probably not,although I've never seen a dvd player with only a mono sound output
Question:	For the 10" model, what is the distance from the y split to each of the rca ends? (trying to determine how far apart my monitors/speakers could be
Answer:	I'm thinking you need more than 10 inches if you are hooking into speakers.
Question:	If i connect the 2 rca cables into the rca out in my amp then connect the 6.3 to the mixer would that work to pass audio to mixer
Answer:	As long as you have match connection at both ends of cable it is ok..
Question:	Will these connect dj controller to a recorder
Answer:	If the DJ Controller has RCA connector at output, and the recorder has a stereo TRS input, yes. You would also need to take into account the signal level from the Controller to the recorder, which simply means that you would need to ramp up your signal output slowly, so you do not get clipping at the recorder
Question:	Is this for a pair or a single speaker
Answer:	Pair
Question:	Would you please confirm these are first quality at this price and not B stock? Thanks
Answer:	These are not "B Stock". At this price these are sold without the stands.

Product features

TISINO 1/4 inch TRS to Dual RCA Stereo Breakout Cable

• These cables allow you to interface between 6.3mm Stereo and 2-RCA, so you can connect between speakers and audio devices that don't both have the same connection types.

• Delivers high performance and versatile full range bass for your musical instrument audio device equipment;

• Accurately transfer high bandwidth frequency quality detailed clean natural pure audio sound/realism and clarity jitter-free in audio signals

Wide Compatibility

This RCA to Jack cable allows you to connect any devices with unbalanced phone Jacks to a speaker, stereo receiver, or other RCA-enabled devices. Eg: Yamaha AV receiver, Denon AV receiver, Onkyo AV receiver, Sony AV receiver, Samsung HT-J4500, Samsung HT-J5500W, Energy 5.1, LG CJ98, Pyle Amplifier, Lepy Amplifiers, etc.

24K Gold-Plated Connectors

• 24K Gold plated Connectors Provide Rigidity and Resist Corrosion, Ensuring the Highest Quality Audio Transfer and Bring you Better Sound Experience.
• RCA connectors have easy grips for plugging and unplugging while ensuring reliability.

Durable and Flexible Cord

• Soft TPE outer coating gives the cord a flexible performance and a resistance to pressure. Freely use the aux cord without any worry of damaging it due to bending(With a 15000+ bend lifespan)

Premium Materials

• Oxygen-Free Copper Lines combined with a double shielding allow for maximum audio quality; reduce distortion and signal loss; minimizes return loss, so music, dialogue, and sound effects are always clear, dramatic, detailed in excellent signal quality

Product description

JOLGOO XLR Female to 1/4 Inch 6.35mm TRS Plug Balanced Interconnect Cable, XLR to Quarter inch Patch Cable, for Microphone,Mixer,Guitar,AMP,Speakers. Workes great and is exactly what You needed. Will make your music sound very clear and powerful.

Specifications:

Gender : Female-Male

Connector A : 3 pin XLR Female

Connector B : 6.35 mm TRS Male

Cable Conductors : Bare Copper

Connector Contacts : Gold-plated

Jacket Material : PVC

Cable Gauge : 20 AWG

Cable Body Outside Diameter : 6.0mm / 0.24 inch

Length : 1 m / 3.3 Feet

Package Contents:

1 x JOLGOO XLR Female to 1/4 Inch 6.35mm TRS Balanced Interconnect Cable 3.3 Feet

1 x Cable tie

• PRO GRADE XLR CABLE : Professional XLR Plugs Cable, 3.3 Feet, the excellent choice for professional audio equipments with 1/4 TRS and XLR connectors. Give you the perfect sound quality!
• EXCELLENT SOUND : 20 AWG 4N Oxygen Free Copper with shielding, Foil shielding and metal braid shield eliminate interference, deliver pristine sound, noise shielding, No hum, no noise, crystal clear music. High quality noise free performance.
• PROFESSIONAL QUALITY : 24k Gold-Plated Connectors for resist corrosion and offer a clear, smooth-flowing optimal signal, ensures minimum signal loss transfer; The right size, they always fit correctly, never too tight or too loose.
• DURABILITY : The wire is flexible and Strong toughness, Environmentally friendly PVC jacket, and premium metal housing and durable, With a much longer service life.
• USAGE : XLR Female to 1/4 inch 6.35mm TRS cable compatible with equipments with 3 pin XLR connectors and 6.35mm socket such as Mixer, Camera, Amplifier, Soundbox, Microphone, Power Amplifier.

User questions & answers

Question:	I have a shure microphone I need to connect to my computer. Will this cable work
Answer:	Not unless you have an adapter to step down from 1/4 in (6.35mm)to 3.5mm..
Question:	I connect it to the microphone. Will the signal be disturbed
Answer:	The cable uses a 24k gold-plated connector to resist corrosion and provide clear, smooth, optimal signals, ensuring minimal signal loss transmission. I haven't encountered any problems using it, I think you will be as satisfied as I am.
Question:	Is its connector gold-plated
Answer:	Yes, the 24k gold-plated connector resists corrosion and provides clear, smooth, optimal signals, ensuring minimal signal loss transmission.
Question:	Friends who have purchased, does the quality of the cable pass
Answer:	Hi, the cable uses flexible wires, environmentally friendly PVC jacket, high-quality metal shell, durable and longer life. It matches my work perfectly.

Product description

Devinal Professional Double 6.35mm TS to XLR Female Connector, 1.8 m (6 Feet)

Features:

• Designed to connect an XLR output to two 1/4" inputs, It is ideal for assigning the signal from a microphone to two channels on a mixing console.
• Compatible with equipment which has 3-pin XLR connectors such as shotgun microphones, studio harmonizers, mixing boards, patch bays, preamps, speaker systems, mixer, amplifier, equalizer, limiter, crossover, digital decoders and stage .
• This cable just splits mono into two mono signals, It does not combine signals to make a stereo signal.

Specification:

• Connector: Gold-plated Unbalanced XLR Female plug x 1;
  
  
• Connector: Gold-plated 1/4 inch (6.35mm) TS Male Plug x 2;
• Braid Shielding: double shielding 98.5% Coverage;
• Jacket Material: Environment-friendly Flexible PVC;
• Gauge: 24 AWG oxygen free copper;
• Outside Diameter: 6.0mm
• Cable Length: 6 Feet (1.8m)

Package:

Devinal XLR Female to Dual 1/4 inch TS Y Cable * 1 pcs

• ★【Microphone Breakout Cable】Devinal XLR Female to 1/4 inch cable is perfect for connecting microphones with XLR connector to DV cameras, camcorders, or other professional audio equipments with 6.35mm jacks. Suitable for mic, mixer, amplifier, sound card, KTV, home theater and other environments etc.
• ★【COMPATIBILITY】Devinal Dual XLR Female to 6.35mm Mono Splitter Cord connects a stereo shotgun or condenser mic with a female XLR connector to equipments with 1/4 inch jack; Connect a professional stereo mic to a camera for an interview or to a computer MIC IN port to record a podcast.
• ★【Excellent Sound】Heavy-duty and high-density shielding for effective EMI and RFI suppression and flexibility ensures high-quality audio transmission without static or pop-up. corrosion resistant,excellent signal quality. Oxygen Free Copper Lines combined with a double shielding allow for a maximum audio quality; reduce distortion and signal loss; minimizes return loss, so music, dialogue and sound effects are always clear, dramatic, detailed in excellent signal quality.
• ★【Durable】Gold-plated 1/4 TS and XLR plug. High quality metal with housing baking finish make the cable more durable than nickel or other materials. Top quality Flexible Rubber Jacket design by italy and made by environment-friendly material improves high quality signal transfer. Polyethylene insulation improves high frequency response.
• ★【Easy Connection】There has 6 inch ( 15 cm) from rca ends extend apart. This cable just splits mono into two mono signals, It does not combine signals to make a stereo signal.

Product description

The MX622 is a versatile mixer combining three balanced microphone or line level inputs with three stereo line inputs into a single stereo line level mix. Essential features include external effects loop mono send with stereo return, independent stereo record outputs, stereo TRS 1/4-inch balanced outputs and full range master two-band equalizer. The internal power supply and single rack-space 19-inch rack mount format allows for easy installation and reliable long-term operation.

• 6-channel Rack Mixer with 3 Microphone Inputs
• 3 Unbalanced Stereo Inputs
• Balanced Outputs
• an FX Loop

User questions & answers

Question:	Is this 240 volts
Answer:	I would say no. The hum you're getting is induced into your pick-up as a part of your audio signal. This is a transformer isolation device which breaks ground-loop hum which is caused by slightly different currents between 2 different 120 volt outlets.
Question:	Is the FX loop global to all inputs? I'd like to apply it only to mic inputs, and not the line inputs, but there appear to be no channel sends
Answer:	Hi Jason,I would use an 1/8" to XLR Male Y cable like this:http://www.amazon.com/Hosa-CYX-403M-Stereo-Breakout-Cable/dp/B000068OEP/ref=sr_1_9?m=A3QYKZ7LXW9O3&s=merchant-items&ie=UTF8&qid=1448889739&sr=1-9&keywords=hosa+1%2F8+to+xlrIf this was helpful, please consider purchasing from us. We have them both in stock and ready to ship. - Pixel Pro Audio
Question:	Looking for a art 2000 express rack mount
Answer:	No "BUT" all outputs are ground isolated from the chassis so a "lift" switch is not necessary when using this.
Question:	What does the in/out button on the fx loop do
Answer:	Yes, the input signal, regardless of connector used, is present on all outputs. http://artproaudio.com/downloads/specsheets/ss_dti.pdf