9 best siemens generators

Product description

Automatic transfer switch that can be installed in the Siemens series of Genready load centers. The switch installs inside the load center and provides an automatic means of switching between utility and generator power. When connected to a Siemens or compatible standby generator, operation is completely automatic. When used in conjunction with a Siemens Genready load center, one enclosure replaces what has typically required 3 (load center, transfer switch, and sub panel).

• Automatic Transfer Switch
• For use with Siemens or compatible generators
• For use only in Siemens Genready load centers
• Interlocks utility and generator mains
• UL listed

User questions & answers

Question:	Is this compatible with Rheem generators
Answer:	There is a reset button this unit. It's close to where the heating element comes out of the black box. You have to slide it out of the base to press it with a pin or something thin. Also, make sure the box slides into the base all the way. There is a safety switch in one of the channels that slides into the base. If the unit is not in the base it won't turn on.
Question:	Can it be manually switched to standby
Answer:	Diameter is 8" so as long as it's size appropriate shouldn't be a problem.

Product description

From the Manufacturer

Siemens standby power mechanical interlock kits provide a means to ensure that the Main breaker powered by utility power within a panel is forced to the OFF position when standby power is in use. It also ensures that the standby source is forced to the OFF position when the utility power is in use. The most common application for these kits is when a portable generator is used to provide back up power to a building. If the utility Main breaker in a panel is left in the -"ON"-position while a generator is powering the panel, dangerous back feeding of the utility power lines can occur. The ECSBPK05 will work on any Siemens or Murray panel that has a QNR(H) or MD-TR(H) Main breaker. The standby power Main breaker must be a two pole, QP or MP type breaker.

• UL Listed
• For use on Siemens or Murray panels
• Main breaker is QNR or MD-TR type
• Standby power breaker must be a QP or MP-T double pole breaker
• No modification of panel required; Breakers not included

User questions & answers

Question:	My 150 breaker is up + left of the generator breaker. panel is siemens w0404mb1150cts/w0404mb1200cts. it lists ecsbpk05 on it but is it correct part
Answer:	Is ok I like it
Question:	Dose it this kit comes with the breaker on the picture? If yes how Amps
Answer:	5.5 wide, 9.5 long and 2 1/4 height, I just measured it
Question:	Will this work with cat#mc0816b1150 meter panel
Answer:	It does, top right black knob turns temp. up, down, or off. Mine works great.
Question:	hello, i need to know if this generates energy by its own, or need to be rechargued. thanks hoping for answers
Answer:	Handle should come attached

Product description

From the Manufacturer

Siemens standby power mechanical interlock kits provide a means to ensure that the Main breaker powered by utility power within a panel is forced to the OFF position when standby power is in use. It also ensures that the standby source is forced to the OFF position when the utility power is in use. The most common application for these kits is when a portable generator is used to provide back up power to a building. If the utility Main breaker in a panel is left in the -"ON"-position while a generator is powering the panel, dangerous back feeding of the utility power lines can occur. The ECSBPK03 will work on any Siemens Ultimate or Murray Rock Solid Load Center that is 150, 200, or 225 Amp. The standby power breaker must be a QP or MP double pole breaker.

• Ensures the main breaker within a panel is forced to the off position when standby power is on
• For use on Siemens or Murray panels that are 150, 200, or 225 amp, ultimate or rock solid type
• Standby power breaker must be a QP or MP double pole breaker
• Adds an extra level of safety
• No modification of panel required; Breakers not included

User questions & answers

Question:	Panel cat# p3030b1150cu has been converted from main lug to main breaker.which interlock will fit
Answer:	Mine are not all the same.
Question:	I have a Siemens P4040B1200CU Panel. Will this interlock work with it
Answer:	Thank you for your question. All Shun premier cutlery is made of 69-layer VGMAX blade steel.
Question:	installed when power is off cant get the gen breaker to switch over the mechinism dosn't let it travel far enough to lock on
Answer:	You pour the old oil out and wipe the unit out with a paper towel.
Question:	Will this work on a lc3040-b murray panel
Answer:	I deep fry chicken! It’s pretty deep I would say definitely!

Product description

From the Manufacturer

Siemens standby power mechanical interlock kits provide a means to ensure that the Main breaker powered by utility power within a panel is forced to the OFF position when standby power is in use. It also ensures that the standby source is forced to the OFF position when the utility power is in use. The most common application for these kits is when a portable generator is used to provide back up power to a building. If the utility Main breaker in a panel is left in the -"ON"-position while a generator is powering the panel, dangerous back feeding of the utility power lines can occur. The ECSBPK02 will work on any Siemens or Murray Load Center in which the Main breaker and standby power breaker are backfed, two pole, QP or MP type breakers.

• UL Listed
• For use on Siemens or Murray panels
• Main breaker is double pole QP breaker 15-125 Amp
• Standby power breaker is a QP or MP type
• No modification of panel required; Breakers not included

User questions & answers

Question:	Will this interlock work on an ite panel with a 2/p mp 100a mail on the too right of the buss bar and a 2/p qp 15a breaker directly under it
Answer:	I have Denby stoneware and that has worked out perfectly.
Question:	can I use 2 - 25 double pole breakers (seimens) 0r do I have to use the breakers like in this picture
Answer:	If the edge of the blade is scraping the block, then it will likely dull the knives. I got a drawer block so my knives rest on the handles. Given how thin the blades are, you could risk bending the blades if they are not pulled straight out of the block, too. Don't get me wrong, these steak knives are awesome and very much like fillet knives in their thinness. I suspect they are fairly tough, too; however, for the price, I'm not about to experiment and test them.Just tell your butler to get these and a drawer block and you will be happy. I know I am.
Question:	Will interlock work with panel mc0816mb1200p
Answer:	I recommend Bamboo KnifeDock™ at Bed Bath and Beyond
Question:	Will this work with a b4242b1200cu
Answer:	The blade itself (which is the widest part on the knife) maxes out at 1 inch at the base. It is the very widest part of the knife.

Product description

From the Manufacturer

Siemens standby power mechanical interlock kits provide a means to ensure that the Main breaker powered by utility power within a panel is forced to the OFF position when standby power is in use. It also ensures that the standby source is forced to the OFF position when the utility power is in use. The most common application for these kits is when a portable generator is used to provide back up power to a building. If the utility Main breaker in a panel is left in the -"ON"-position while a generator is powering the panel, dangerous back feeding of the utility power lines can occur. The ECSBPK01 will work on any Siemens or Murray Load Center in which the Main breaker and standby power breaker are backfed, two pole, QP or MP type breakers.

• UL Listed
• For use on Siemens or Murray panels
• Main breaker is double pole QP breaker 15-125 Amp
• Standby power breaker is a QP or MP type
• No modification of panel required; Breakers not included

User questions & answers

Question:	Will the siemens interlock workpn the old ite panel
Answer:	Siemens owns some of the circuit breaker business previously branded as GOULD or I-T-E. My old GOULD panels (mid-'80's) call for type QP breakers, among others. Siemens is now the one that sells QP breakers, and I doubt this is some different QP as they look identical. This interlock is for QP (and Murray MP-T) breakers according to the instruction sheet, so it seems likely the interlock would work with an old ite panel using QP breakers. I know this question is old, but people will still look at it so I wanted to clarify. Now to muddy things: I called Siemens support because I wanted to see if I could use a different location for the main utility breaker, since their current documentation shows only using the top left position. He explained the new boxes say this because that is the only spot the screw for the MBR-2 retainer fits. This did not seem to be the case for MBR-1 my panel lists or the retainer in ECSBPK01. Unfortunately, he pointed out that my panel was not listed among those designated as acceptable in the ECSBPK01 instructions. I had thought it was on the list, due to misreading the asterisks. He agreed this just meant that the company had not tested it, but implied the lack of paper trail could be a problem depending on the inspector or insurance. It seems to fit and work perfectly, though.
Question:	will this work on general electric breakers
Answer:	OK . . . I'm not a fan of these Generator Transfer ' Brackets ' . To me , they are all somewhat flimsy , BUT , that said , I think that this brand is one of the better ones . It costs more but my recommendation is to go with a separate ' Double Pole Transfer Switch " such as a Siemens Model # DTNF223 . SO . . . yes it works but one has to use it carefully to avoid it bending or not working properly ..
Question:	Will the ecsbpk01 work with siemens qp breakers installed in a siemens main lug p1224l1125cu
Answer:	Yes, the ECSBPK01 interlock kit is listed for use with the P1224L1125CU load center and will interlock QP branch breakers. You can download the instruction sheet for the ECSBPK01 as well as a wiring diagram for the P1224L1125CU via our Siemens Download Center. Go to the following link https://w3.siemens.se/download-center/index.html , clikc on "Power Distribution" box. Choose "USA" and then enter the applicable partA# in the search box to find applicable wiring diagram for the P1224L1125CU load center as well as installation instructions for the ECSBPK01.
Question:	Will this fit GE breakers
Answer:	did not like this product. Very hard to put on the siemens breakers, also had to much slop on the switches. I couldn't use because of where my main is located

Product description

From the Manufacturer

Siemens standby power mechanical interlock kits provide a means to ensure that the Main breaker powered by utility power within a panel is forced to the OFF position when standby power is in use. It also ensures that the standby source is forced to the OFF position when the utility power is in use. The most common application for these kits is when a portable generator is used to provide back up power to a building. If the utility Main breaker in a panel is left in the -"ON"-position while a generator is powering the panel, dangerous back feeding of the utility power lines can occur. The ECSBPK04 will work on any Siemens Ultimate or Murray Rock Solid Load Center that is 100 or 125 Amp. The standby power breaker must be a QP or MP double pole breaker.

User questions & answers

Question:	will this fit a p3030b1100cu panel
Answer:	I would never put a knife of this caliber in the dishwasher. I don’t know if it is dishwasher safe. I don’t care, it should be taken care of properly
Question:	Will this work for a ecsbpk
Answer:	VG 10 was phased out by Shun a few years ago. All CURRENT inventory is made with the VGMax Chefs Corner Store (Shun retailer since 2006)
Question:	How many come in one order
Answer:	The edge has remained as sharp as it was on first use👍👍paper plates are probably a bad idea 😜
Question:	Will this work on a siemens series E panel
Answer:	I’d start with Amazon.

Product description

From the Manufacturer

Siemens standby power mechanical interlock kits provide a means to ensure that the Main breaker powered by utility power within a panel is forced to the OFF position when standby power is in use. It also ensures that the standby source is forced to the OFF position when the utility power is in use. The most common application for these kits is when a portable generator is used to provide back up power to a building. If the utility Main breaker in a panel is left in the -"ON"-position while a generator is powering the panel, dangerous back feeding of the utility power lines can occur. The ECSBPK06 will work on any Siemens or Murray panel that has a QN(H) or MD-T(H) Main breaker. The standby power Main breaker must be a two pole, QP or MP type breaker.

• UL Listed
• For use on Siemens or Murray panels
• Main breaker is QN or MD-T type
• Standby power breaker must be a QP or MP-T double pole breaker
• No modification of panel required; Breakers not included

User questions & answers

Question:	Will this fit a. siemens p2424b1100cu
Answer:	These are sold by the Shun company and are Authentic Shun and come in a Shun box.
Question:	Would it fit a Siemens S4040B1200 panel
Answer:	VG10 according to Shun: perfectly good Japanese cutlery steel. Comes wicked sharp. A bigger issue, practically, is that the basic knife comes in (at least) two packagings. One (shown here) is the knife + nice, slender leather sheath, making it a perfect "dining out" gentleman's knife; though this version comes in rather a basic cardboard box. The other is the same knife in a rather smart (still card!), foam-fitted presentation box, though *without* the leather sheath. I ordered here the leather sheath version, as shown, But what came was the sheath-less, presentation box version.... Very annoying.
Question:	Will this fit a siemens S3 030B1100 panel
Answer:	Yes, I believe it is. It says KAI 5900 on the blade, and the blade is imprinted with the Shun trademark. I have a Shun chef’s knife and it also has KAI and the Shun trademark imprinted on its blade.
Question:	Will this device fit a siemens panel p1224b1100cu
Answer:	Ebony PakkaWood.

Product description

The Siemens generator ready load center can save thousands of dollars in future generator installation expenses while keeping initial expenses to a minimum allowing for a combination of a load center, transfer switch, and critical circuit sub panel into one neat enclosure. The load center has two interiors, both powered by utility power under normal operating conditions. When utility power is lost, a transfer mechanism switches so that only one interior, which contains the critical circuits, is backed up by a generator. This allows for the use of a smaller, more cost effective generator and to prevent that generator from being overloaded. The transfer switch is not included to provide flexibility in generator selection. For manual operation with portable generators, the Ecsbpk01 interlick kit should be used. For automatic operation on a standby generator, the gentfrswtch should be used.

• 200 amp main breaker
• Indoor rated enclosure
• Ul listed device

Product description

Talon's line of power outlet panels are designed to meet the demands for temporary power at construction sites and recreational vehicle parks. For construction site applications, power outlet panels are installed for temporary use only until electrical power is available at the site. Recreational Vehicle parks use power outlet panels on a permanent basis as a power source for the RV's distribution system. A wide variety of configurations are available to address almost any application. Design options include surface (pole mount) and pedestal mount construction, with or without meter socket provisions, and top or bottom feed.

• UL Listed and Outdoor Rated
• Elevated cover with padlock prevents unauthorized use
• Receptacles protected by Siemens circuit breakers
• Surface or pole mount
• UL Listed and Outdoor Rated
• Elevated cover with padlock prevents unauthorized use
• Receptacles protected by Siemens circuit breakers
• Uses Siemens and ElectriCenter RX type hubs

User questions & answers

Question:	Can I install this as a permanent sub panel inside house
Answer:	yes it will for copper that we used
Question:	Will the lugs accept 2 gauge wire
Answer:	The 20A and 30A outlets are installed on separate legs, but, if necessary, there is room on the bus to move the breakers to the same leg.
Question:	I'd like to know if the 20A and 30A circuits were on the same leg. My RV has 30A and 20A service and a KW meter.Thanks
Answer:	There are a few breaker spaces but nowhere to mount an outlet. You can go through a knock out and mount one under/on side in weather proof box. Hope that helps.
Question:	Is there a place to install a second 20a gfci outlet? i need two outdoor outlets in winter, would not use at same time as the 50a service for my 5er
Answer:	Sierra Concepts is a USA brand with factories in China.

Product features

Talon Temporary Power Panels

The Talon line of temporary power panels is ideal for construction job-site temporary power and campground power supply. The product line offers a wide range of construction options to meet a variety of needs.

Mounting construction options include surface/pole or earth/direct burial. Unmetered and metered options available, with the metered options available in top or bottom feed. A variety of receptacle configurations are also available. Check the product description for construction details.