14 best fluke dmms

Product description

With its integrated non-contact voltage detection and the AutoV/LoZ function preventing false readings caused by ghost voltage, the Fluke 117 Electrician's Multimeter is the ideal multimeter for electricians. In fact, users around the world have said their 117 is an investment in accuracy. The Fluke 117 provides Min/Max/Average readings, measuring frequency and capacitance. With its easy-to-use design, the Fluke 117 will save you time, allowing you to move from job to job with ease. Surge protection 6 kV peak per IEC 61010–1 600 VCAT III, Pollution Degree 2

From the Manufacturer

Compact true-rms meter for commercial applications. The Fluke 117 is the ideal meter for demanding settings like commercial buildings, hospitals and schools. The 117 includes integrated non-contact-voltage detection to help get the job done faster.

• VoltAlert technology for non-contact voltage detection
• AutoVolt automatic AC/DC voltage selection. DC millivolts - Range : 600.0 mV, Resolution : 0.1 mV
• Low input impedance: helps prevent false readings due to ghost voltage
• Large white LED backlight to work in poorly lit areas
• True RMS for accurate measurements on non-linear loads.Operating temperature:-10°C to +50°C.Battery life:400 hours typical, without backlight

User questions & answers

Question:	Can this multimeter be used for an Automtive Tech
Answer:	While this multimeter can do plenty of things for automotive. Most serious mechanics get the 87 or 88 series.
Question:	what is the range of the capacitor that can be tested in this model
Answer:	hope this helps. Range/Resolution: 1000 nF / 1 nFRange/Resolution: 10.00 μF / 0.01 μFRange/Resolution: 100.0 μF / 0.1 μFRange/Resolution: 9999 μF / 1 μFRange/Resolution: 100 μF to 1000 μFAccuracy: 1.9% + 2Range/Resolution: > 1000 μFAccuracy: 5% + 20%
Question:	Can this multimeter be used on vehicles for a parasitic load test? I don't want to spend over $400 for the Fluke 88 as it is for personal vehicle use
Answer:	it has been used on motorbikes for sure. It just needs to be in amp mode. If you're doing parasitic load, then you're focused on DC Amps. The 117 has up to 6, while the 88 has up to 10. I don't see a big issue as you're just doing parasitic, not actual use. If anything actually pulls more than 6, you'll blow the internal fuse and have to replace it, but that's about it. Shouldn't be a problem(I've just tested mine on my car and it works).
Question:	What are the differences to pick between the Fluke 117 and the Fluke 115? My intended use would for ham radio and kit-building of electronic kits
Answer:	The 117 adds • VoltAlert™ technology for non-contact voltage detection • AutoVolt automatic ac/dc voltage selection Both are handy but not essential. Be aware of none of these 'electrician' Flukes (115/116/117) read milliamps or microamps -- essential for electronics troubleshooting & design work but unnecessary for electrician tech work. That said, when reading current in amps they do seem to read accurate down to around at least 0.010 amps (10 milliamps) or so.
Question:	is it two prong or three prong? can't see it in the picture
Answer:	It's actually made to be plugged into a grounded wall socket, replacing the 2 3-pronged outlets with its 6 available grounded outlets. It can even replace the outlet cover and be screwed into place. I've got a bunch of these and love them.
Question:	What are the actual dimensions of this unit
Answer:	against the wall, mine is about 4 inches wide, 4 3/4 inches tall, and about 1 3/4 inches deep
Question:	Will this work with half-switched outlets (where one outlet is always live and one is switched), or do all the outlets get power from only one outlet
Answer:	All power for this device comes from the TOP outlet of your receptacle -- so if that is switched then all outlets on this device will be switched (or if your bottom outlet is switched then all outlets on this device will NOT be switched).
Question:	Can this actually completely replace the existing outlet wall plate, or does it only plug in/screw on TOP of the wall plate
Answer:	This can replace the existing wall plate -- that's how I am using it.

Product features

More Outlets

6-outlet wall plug adapter power strip expands 2 grounded outlets into six to power any smartphone including iPhone and Android, lamps, laptops, hair dryer or other electronic device

Space-Saving Design

This outlet tap has three standard outlets and three extra wide spaced outlets to fit your bulky cell phone charger or power adapter

Compatibility

This GE wall plug works with your existing grounded 3-prong 2 outlet duplex receptacle to create a charging station in any room in your home, office, bedroom, kitchen, living room, dorm room or any area with limited outlets

Fluke 117 Electrician’s Multimeter

The Fluke 117 is the ideal meter for demanding settings like commercial buildings, hospitals and schools. The 117 includes integrated non-contact voltage detection to help get the job done faster.

Complete the Tool Belt

The Fluke 117 is the ideal meter for demanding settings like commercial buildings, hospitals and schools.

Hands Free Operation

Compatible with optional magnetic hanger (ToolPak) for hands free operation.

Non-Contact Voltage Detection

The 117 includes integrated non-contact voltage detection to help get the job done faster.

Perfect for Preventative Maintenance

The Fluke 117 is a key piece of a full tool belt of Fluke tools for all preventative maintenance needs.

Product description

Fluke Corporation is the world leader in the manufacture, distribution and service of electronic Test tools and software. Since its founding in 1948, Fluke has helped define and grow a unique technology market, providing testing and troubleshooting capabilities that have grown to mission critical status in manufacturing and service industries. From industrial electronic installation, maintenance and service, to precision measurement and quality control, Fluke tools help keep business and industry around the globe up and running.

The Fluke 87-V Digital Multimeter is a versatile True-RMS meter that's perfect for professional or around-the-house use. This meter offers auto and manual ranging for maximum flexibility, and it also offers an annual bar graph for quick-changing or unstable signals. Classically designed, the Fluke 87-V has a removable holster with built-in probe and test-lead storage. For added convenience, it arrives ready to go with TL75 test leads and a nine-volt battery.

The Fluke 87-V Digital Multimeter At a Glance: Auto and manual ranging Removable holster with built-in probe and test-lead storage Built-in thermometer CAT IV 600-volt safety rated Includes TL75 test leads, alligator clips, and 9-volt battery Lifetime warranty

Fits in the palm of your hand.

Safe, Convenient Functions Enable Productivity

Designed for maximum productivity, the Fluke 87-V has more problem solving power, safety, convenience, and impact protection than the previous 80 Series models. This multimeter offers improved measurement functions, accuracy, and resolution, as well as trouble-shooting features to solve problems with motor drives, in-plant automation, power distribution, and electro-mechanical equipment.

Auto and Manual Ranging for Versatility

This unique multimeter provides both auto and manual ranging for optimum flexibility. And it's chock-full of helpful functions for accurate voltage and frequency measurements, even on adjustable-speed motor drives and other noisy equipment.

The Fluke 87-V also boasts a built-in thermometer that conveniently allows you to take temperature readings without having to use a separate instrument--no more carrying a thermometer to take readings inside a refrigerator or air conditioning unit.

When used with ToolPak, a convenient magnetic hanger (sold separately), the Fluke 87-V can be set up and viewed hands free.

Selectable Filter and True-RMS AC Voltage for Dependable Accuracy

Incredibly responsive and reliable, the Fluke 87-V is accurate to 0.05% DC. Also, True-RMS AC voltage and current provide accurate measurements on non-linear signals. Additionally, a selectable filter ensures accurate voltage, while an input alert provides an audible warning against incorrect use of the input jacks.

The Fluke 87-V measures up to 0 A, up to 20 A for 30 seconds, and 1,000-volt AC and DC. Also, it features an analog bar graph that allows for measurement of quick-changing or unstable signals. What's more, this meter measures frequency to 200 kHz, as well as resistance, continuity, and diode test.

The Fluke records Min/Max/Average and has a Min/Max alert that automatically captures variations. The Relative mode removes test lead interference from low-ohms measurements.

Easy-Read Display and Safe, Durable Design

The Fluke 87-V comes equipped with a large, backlit display that shows easy-read digits. An improved selectable sleep mode helps increase the life of the battery, while an access door makes for fast battery changes without breaking the calibration seal.

The Fluke 87-V is also safe--it's independently tested to comply with the second edition of ANSI/ISA S82.01 and EN61010-1. Also, CAT IV 600V/CAT III 1000V rated, this handy meter can withstand impulses in excess of 8,000 volts and can reduce risks related to surges and spikes. Additionally, its tightly sealed design helps protect against damage, even when the unit is dropped.

The Fluke 87-V is backed by a lifetime warranty.

What's in the Box

Fluke 87-V; TL75 test leads; AC72 alligator clips; holster; nine-volt battery (installed); Getting Started manual; Manual Fully downloadable off of the Fluke website; and 80BK temperature probe.

From the Manufacturer

Fluke Digital Multimeter has auto and manual ranging for maximum flexibility and has annual bar graph for fast changing or unstable signals. It measure up to 10 A, 20 A for up to 30 seconds as well as up to 1000V AC and DC.

• Accurate frequency measurements on adjustable speed drives (ASD) due to Fluke-designed low-pass filter
• Built-in thermometer allows temperature measurements without a separate thermometer
• Peak Min/Max allows capture of intermittents as fast 250 µS
• Dual display resolution – 6000 or 20,000 counts – lets you see small changes in displayed readings.CAT III 1000V, CAT IV 600V safety rated
• Measure up to 1000 VAC and DC; Operating Altitude: 2000 m

User questions & answers

Question:	What is the primary difference between the fluke 87v and the 87vMax
Answer:	The major advantages of the 87V Max are: Withstands drops up to 4-meters (13 feet) with industrial strength casing and holster Waterproof, dustproof IP67 case for the most extreme work sites
Question:	is thier a difference in the fluke 87 and the 87-v
Answer:	"is thier a difference in the fluke 87 and the 87-v" Is THERE a difference BETWEEN the Fluke 87 and 87-V?
Question:	how low can the meter read in picofareds? 1pf? 10pf? 100pf? not that low? Also the same in resistance
Answer:	Hi the Fluke 87 is measures capacitance in several ranges, the lowest Range being 10.00 nF with a 0.01 nF resolution, the accuracy of this reading is 1% plus several counts. The lowest resistance range is 600 Ohms with a 0.1 Ohm resolution. So to answer your questions No it will not work for your pico farad measurements but it will read resistance less than 500 Ohms. If you need better capacitance reading capabilities you way want to look for s good LCR meter.
Question:	Can the 87-V measure temperature
Answer:	Yes. It has a temperature mode and includes a bead probe. It may be worthwhile to pick up the thermocouple adapter as well.

Product features

Fluke 87V/E2 Industrial Electrician Combo Kit

The Fluke 87V Industrial Multimeter provides the resolution and accuracy to efficiently troubleshoot motor drives, plant automation, power distribution, and electromechanical equipment - even in loud, high-energy, and high-altitude locations. The 87V is designed so you can work more efficiently. The 87V lets you identify complex electrical problems fast. It supports accurate measurements on VFDs using a low-pass filter.

Accuracy

Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment

Display

Large digital display with bright, two-level backlight makes the 87V significantly easier to read than older models

Applications

Working on VSDs/VFDs: Take accurate voltage, current and frequency measurements on the output side of the drive at either the drive itself or at the motor terminals.

Industrial troubleshooting: All of the resolution and accuracy you need to solve more problems on motor drives, in-plant automation, power distribution, and electro-mechanical equipment.

Checking power quality: Capture glitches and spikes as short as 250 μs. Identify irregular signals.

Accessories

Optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasks

Product description

Designed for basic electrical tests, the Fluke 101 offers reliable measurements for electricians and heating/AC techs. This small, lightweight multimeter fits comfortably in your hand but is rugged enough to withstand daily use for years to come.

• Basic dc accuracy 0.5%
• CAT III 600 V safety rated
• Diode and continuity test with buzzer
• Small lightweight design for one-handed use
• Rugged, durable design

User questions & answers

Question:	Does anything come with it
Answer:	TL175 Test Leads are included.
Question:	Can you add the magnetic strap to this
Answer:	The TPAK would work with the 101.
Question:	Is it a backlit screen
Answer:	The 101 does not have a backlight.
Question:	Does it make sound with continuity
Answer:	I just checked , mine doesn’t any sound .

Product features

Fluke 101 Digital Multimeter

Designed for basic electrical tests, the Fluke 101 digital multimeter offers reliable measurements for residential/commercial electricians and heating and air conditioning technicians. This small, lightweight multimeter fits comfortably in your hand but is rugged enough to withstand daily use for years to come. When it comes to professional-grade affordable multimeters, the Fluke 101 digital multimeter is your best choice.

Product description

The Fluke 115 Field Service True-RMS Technicians Multimeter is a compact meter for field service technicians and it is also the solution for a wide variety of electrical and electronic testing applications. It includes a 4mm silicone test lead set, a user manual and an installed 9V battery. The Fluke 115 displays true-rms voltage and current readings with 6000 count resolution, test diodes frequency, continuity and capacitance and provides Min/Max/Average readings to record signal fluctuations. A large white LED backlight aids work in poorly lit areas. Its easy-open battery access door makes battery changes a snap. It has been independently tested for safe use in CAT III 600 Volt environments Fluke Corporation is the world leader in the manufacture, distribution and service of electronic test tools and software. Since its founding in 1948, Fluke has helped define and grow a unique technology market, providing testing and troubleshooting capabilities that have grown to mission critical status in manufacturing and service industries. From industrial electronic installation, maintenance and service, to precision measurement and quality control, Fluke tools help keep business and industry around the globe up and running.

Rugged and accurate enough for professional use, the Fluke 115 Multimeter for Field Service Technicians is ideal for a wide variety of electrical and electronic testing applications. Offering Min/Max/Average measurements with elapsed time to record signal fluctuations, this True-RMS meter provides easy one-handed operation in a compact package. For added convenience, it arrives ready to go with TL75 test leads, holster, and nine-volt battery.

Portable True-RMS Meter for Readings On the Go

Lightweight and compact, the Fluke 115 is easy to handle, making it the perfect choice for measuring components, voltages, and circuits on the go. Accurate, easy-to-use, and comfortable to carry in the palm of your hand, this multimeter does it all. Use it on the jobsite or around the house--wherever and whenever you need a general purpose, portable meter that gives clear, accurate readings.

Compatible with ToolPak, a convenient magnetic holder (sold separately), the Fluke 115 will give you even greater on-the-job portability.

Simple, Intuitive Operation Ensures Accuracy

Complete with a backlit 6,000-count digital display that features large digits for easy reading, the Fluke 115 is exceptionally user friendly. Its straightforward labeling clearly shows the function of each button, dial, and jack. And best of all, this True RMS meter gives you easy-to-understand readings. For example, a simple beep indicates when a wire or fuse is functioning properly--no beep means it's time to recheck your settings.

For further convenience, the Fluke 115 offers auto ranging, and it guards against common errors that could lead to inaccurate readings. For example, if you forget to turn the dial to 'A', and then feed current into the meter, or if you switch the dial to 'A', but forget to switch the lead to amps, this meter will alert you to the problem.

Professional Meter That's Versatile, Safe, and Accurate

Offering a DC ma range that can handle everything from 200ma to 1A, the Fluke 115 allows you to check continuity, frequency, capacitance, and diode test. It measures 20 A (30 seconds momentary, 10 A continuous) and even provides accurate measurements on non-linear loads.

Additionally, its operating temperature range of -10 degrees to +60 degrees Celsius combines with durable casing for maximum resistance to wear and tear. An added bonus, overload protection ensures uninterrupted operation and long life.

CAT III 600-volt safety rated, the Fluke 115 is UL, CSA, TUV, and VDE listed, and all of its inputs are protected to CE, IEN61010-1 CAT III 600V.

What's in the Box

Multimeter; holster; nine-volt battery (installed); 4mm silicone test lead set; and user manual.

From the Manufacturer

The FLU115 is the solution for a wide variety of electrical and electronic testing applications. Features Minimum /Maximum /Average with elapsed time to record signal fluctuations. This True-RMS meter provides easy one-handed operation in a compact package. Includes TL75 Test leads, holster, user's manual and 9-volt battery (installed).

• True-rms for accurate measurements on non-linear loads
• safety rated
• Large white LED Backlight to work in poorly lit areas
• Operating Temperature -10 °C to + 50 °C Storage Temperature -40 °C to + 60 °C
• Check continuity, frequency, capacitance and diode test
• Measures 20 A (30 seconds momentary; 10 A continuous)
• True-RMS for accurate measurements on non-linear loads

User questions & answers

Question:	Would this be good for automotive work
Answer:	Quite good.
Question:	Is it made in the USA
Answer:	No teerhe 100 series is designed in USA built in China. (To fluke specs) still high quality if you want a USA built model check out the 87-5 or 279 you pay for it though mine with nist cert was 600 bucks
Question:	Is that cables included if I buy in this Fluke 115 true RMS multimeter
Answer:	Fluke TL75 test leads are included.
Question:	Would anyone recommend this for Computer repairs and checking wires in a Computer? (Future PC Technician starting out and shopping for tools
Answer:	This multimeter is not good for computer repair. While it is accurate it doesn't have milli or microamps, which is very necessary for troubleshooting computers. You would need something like the Fluke 177 (a little more than 100 dollars more) and has microamps, or you could get something like a B&K Precision 2708B, which has milli and microamps. Also the B&K Precision is less than 100 dollars, so I would say for a budget meter it's the best considering its ability. I've watched reviews on dozens of multimeters, and the B&K Precision 2708B is pretty quick and quite accurate, especially at its price point.

Product features

Fluke 115 Digital Multimeter

With its simple operation, compact design, and ease of use, the Fluke 115 True RMS digital multimeter provides the perfect answer for general purpose electrical and electronic test requirements. The Fluke 115 displays True RMS voltage and current readings with 600 count resolution, continuity, and capacitance, making it perfect for quick verifications and field service use. Fluke 115 Digital Multimeters are independently tested for safe use in CAT III 600V environments.

General multimeter capabilities

When you need to eliminate false or ghost voltages or perform continuity, connection or basic wiring checks use the Fluke 115. Other measurement capabilities include includes resistance, frequency and capacitance measurement capabilities.

Safe and reliable

Fluke has been a trusted test tool partner since 1948, helping you and your team work safely with tools that meet or exceed the safety standards of the environments you work in. The Fluke 115 multimeter is independently tested for safe use in CAT III 600V environments.

Ease of use

The 115 digital multimeter offers the users one-handed operation and a backlit display.

The large, easy-to-read digits offer a 6000-count resolution.

What's in the box?

Fluke 115 Digital Multimeter

Holster.

Installed 9V battery.

4 mm silicone test lead set.

User manual.

Product description

The Fluke 107 digital multimeter is made to fit the way you work It is designed to fit in the palm of your hand and go with you no matter where your job takes you. Fluke 107 Palms sized Digital Mustimeter with Frequency, Diode Test Leads, and 2 AAA Batteries (Installed) User's Manual Smart Strap.

• Voltage, resistance, continuity, capacitance
• Input terminal for AC and DC current measurements to 10 A and current
• Backlit display
• Data hold
• Diode test, plus frequency and duty cycle measurements

User questions & answers

Question:	Is this a low impedance meter
Answer:	Yes this is a low Z meter
Question:	What size case do you need for the Fluke 107 meter
Answer:	Fluke soft case C-01 will fit the Fluke 101,106 and 107 meters and TL75 test leads. It's a snug fit and comes with a belt loop for easy carry around the job site. If you want a larger soft case with extra room for accessories get the C115 case. I have both and they work very well.
Question:	Does this come as a unit alone, or does this include test leads and the magnetic stand
Answer:	The Fluke 107 comes with Fluke TL75 test leads and a magnetic stand called a "Smart Strap".
Question:	Does this come with a bag (soft case) to carry it around
Answer:	no sir, no soft case

Product features

Fluke 107 Palm-sized Digital Multimeter

The Fluke 107 is a compact, easy to use tool. It is a palm-sized digital multimeter that delivers safe, reliable measurements time after time.

The Fluke 107 is a great product made to fit the way you work! It is the only Fluke digital multimeter designed to fit in the palm of your hand and go with you no matter where your job takes you.

Product description

At work, you need a durable, reliable and accurate digital multimeter. Fluke 15B + digital multimeter can meet or exceed your needs. Fluke 15B + easy to use, you only need one hand to operate, even when wearing gloves can also be flexible operation, can meet all your needs.And our bag is made of leather. It will be strong and Durable. 600 V Cat III safety design specifications 50% of the display range, bright white backlight Voltage, resistance, current, capacitance Input terminal of the AC and DC current measurement value of 10 A Diode test, data retention. Original FLUKE 15B+ Digital MultiMeter STANDARD ACCESSORIES 1. A Pair of Original Test leads 2. True FLUKE F15B+ meter 3. Free black carrying bag 4. Original User Manual 5. Batteries Note: Please click here to download English user manual: http://assets.fluke.com/manuals/151718__umeng0000.pdf

• Multiple functions with Auto / Manual ranges
• Large LCD display, 4,000 Counts update 3/sec
• Frequency:50Hz to 100Khz
• Temperature: -55C to 400C
• Dimension : 180 x 89 x 51.5mm

User questions & answers

Question:	this fluke, 15B says it uses 2 AA batteries, the fluke 15 B by amazon says it uses one 9 volt battery. whats up with this
Answer:	This is Original Fluke 15B+. We are direct seller from China.
Question:	Does this meter make a beep sound when testing for continuity
Answer:	Fluke designs in quality and safety first and features last. This is why you can't go wrong with a Fluke. With that said their lower end models are a bit Spartan. Like having a bargraph is really useful to notice quick flutter in what you're measuring ( since it updates much quicker than the number reading), also I would really try and get a meter with the min max feature. I find it indispensible especially if you don't own a scope. You can leave a meter in min max mode for hours and you can catch glitches that way.I find the 15b perfect for me being a computer engineer, but If you can stretch your budget get a 115 or one of the 170 series meters or even better one of the 80s, 87-V being the best. A Fluke multimeter is going to last you forever, meters don't really become outdated, I have an 8060A on my desk, it was built in 1985 and works like a charm. This is why I think it's worth spending a little extra for those few really useful features. The 15B is it's replacement after 30 + years.Also keep in mind if you're serious about electronics you want 2 meters. To measure multiple things at once and to double check and cross reference between them. Good Luck
Question:	This is original fluke or chinese
Answer:	The major advantages of the 87V Max are: Withstands drops up to 4-meters (13 feet) with industrial strength casing and holster Waterproof, dustproof IP67 case for the most extreme work sites
Question:	Is the 15b+ a better choice than the
Answer:	"is thier a difference in the fluke 87 and the 87-v" Is THERE a difference BETWEEN the Fluke 87 and 87-V?

Product description

Fluke has combined the Rugged 179 true-rms multimeter with a built-in thermometer and the 323 AC Current Clamp.The combo pack provides you the functionality needed to effectively and quickly identify and troubleshoot most electrical and electromechanical problems.

From the Manufacturer

The 179 model set the new benchmarks for general purpose multimeters. They set the standard with a combination of precision, features, ease-of-use, safety and reliability.

• Industrial thermometer combo kit
• Full featured DMM with advanced electronic troubleshooting functions plus probes
• 80BK Temperature Probe
• Installed 9V battery
• Test leads
• Users manual

User questions & answers

Question:	Does this come with a thermocouple to take tempreture as well as the normal probes
Answer:	It includes a pair of normal meter test leads and a 3 foot type K bead wire thermocouple sensor
Question:	does the 179 come with a certificate of calibration
Answer:	Typically on new units, there is a certificate of conformity. Calibration certificates are only provided when meters are sent in for calibration.
Question:	What is the range of the current clamp? fluke has combined the rugged 179 true-rms multimeter with a built-in thermometer and the 323 ac current clamp
Answer:	Fluke website
Question:	does this multimeter come with the lifetime warranty
Answer:	This is extracted from my Fluke 179 manual:*Lifetime* is defined as 7 years after Fluke discontinues production of the product, but at least 10 years after purchase. The LCD display is 10 years. Fuses, batteries, and stupidity associated damage is not covered

Product features

Fluke 179 True RMS Digital Multimeter

With its precision, reliability, and ease of use, the Fluke 179 True RMS Digital Multimeter is the preferred solution for professional technicians around the world. With all the features you need to troubleshoot and repair electrical and electronic systems, the Fluke 179 also offers a digital display with an analog bar graph and built-in temperature measurements.

You can trust the Fluke 179 to get the job done in all of the messy, loud, high energy, and high places you work.

• Basic dc accuracy 0.5%
• CAT III 600 V safety rated
• Diode and continuity test with buzzer, Rugged, durable design.
• Small lightweight design for one-handed use
• Automatic shutdown, Battery is easy to replace

User questions & answers

Question:	Forgive my ignorance, can I use this to measure the impedance of a guitar cabinet by contacting the test leads to the input jack
Answer:	Good question! No you cannot. These meters use DC current to test resistance. Transformers and voice coils rely on AC current, which is what introduces inductive capacitance and reactance in a coil, also known as impedance. To keep it simple, these meters will give you an inaccurate reading for impedance values. Find a meter used for audio electronics to test these values.
Question:	What batteries does this take
Answer:	2 batteries AAA
Question:	what is the listed NSN on the back
Answer:	there is no NSN for this model, it is a model designed for china but has been put on the "grey market". no formal support in the USA
Question:	Doe this come with test leads? Odd that they aren't shown or mentioned, but Amazon implies you ought to buy a set with this
Answer:	Its says they come with leads right on the box, my original purchase didnt so I returned it for credit and repurchased the item, the second one came with leads

Product description

Designed for easy one-hand operation, the Fluke 106 digital multimeter is the perfect troubleshooting tool for go/no go testing. This palm-sized digital multimeter delivers safe, reliable measurements time after time.

• Voltage, resistance, continuity, capacitance
• Input terminal for AC and DC current measurements to 10 A and current
• Data hold

User questions & answers

Question:	Does it come with factory calibration? How long
Answer:	568
Question:	does this come with a certificate
Answer:	To compensate for inaccurate readings that may result from measuring shiny metal surfaces, you can cover the surface to be measured with electrical tape or flat black paint (table of some common materials.
Question:	Its made in usa or china
Answer:	Connect the charging USB to your PC and I should come up as a folder/drive on your computer. Then you copy the recording file to your desktop. Hope this helps!
Question:	Does this meter have decent volume on continuity testing
Answer:	This device will not automatically transcribe into a word document, you have to manually upload the file first. Once uploaded, the file can then be transcribed into word.

Product features

Fluke 106 Digital Multimeter

The Fluke 106 digital multimeter is made to fit the way you work! It is designed to fit in the palm of your hand and go with you no matter where your job takes you.

Product description

The Fluke 289 True-RMS Logging MultiMate with Trend Capture is the ultimate handheld tool for demanding applications that require high-precision. It quickly documents design performance and graphically displays what happened. Saving measurements allows you to name and recall measurements made in the field, and it has a real time clock for automatic time stamping of saved readings. Its-Feet unique logging and graphing capabilities mean you no longer need to download logged readings to a PC to detect a trend, and it stores up to 15,000 recorded events. The low impedance voltage function prevents false readings due to ghost voltage. The true-RMS AC voltage and current accurately measures complex signals or non-linear loads. The selectable AC filter helps display a steadier reading when the input signal is changing rapidly or is noisy. The adjustable recording and auto hold thresholds specify a percentage change in the readings that begins a new event. The 289 features a large 50,000 count, 1/4 VGA display with a white backlight, that allows multiple sets of measurement information to be simultaneously displayed at the same time. The millimeter runs about 100 hours, 200 hours in logging mode, on 6 AA alkaline batteries, or NEDA 15A IEC LR6. The 289 is multi-lingual interfaced and includes the following: a manual, 6 AA Batteries, a set of TL71 silicone test leads, a probe holder, and two AC72 alligator clips. The Fluke 289 True-RMS Logging MultiMate is designed to meet CSA, UL, TÜV, CE agency approvals, and is CAT III 1000 V / CAT IV 600 V safety rated. Fluke Corporation is the world leader in the manufacture, distribution and service of electronic test tools and software. From industrial electronic installation, maintenance and service, to calibration and quality control, Fluke tools help keep business and industry around the globe up and running..

From the Manufacturer

The fluke 289 true-rms logging multimeter with trendcapture is the ultimate handheld tool for demanding applications that require high-precision. It quickly documents design performance and graphically displays what happened. Saving measurements allows you to name and recall measurements made in the field, and it has a real time clock for automatic time stamping of saved readings. Its' unique logging and graphing capabilities mean you no longer need to download logged readings to a PC to detect a trend, and it stores up to 15,000 recorded events. Weighing less than two pounds, the fluke 289 packs more accuracy and convenience into a handheld multimeter than ever before, putting more problem solving power in your hands. The low impedance voltage function prevents false readings due to ghost voltage. The true-rms ac voltage and current accurately measures complex signals or non-linear loads. The selectable ac filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or is noisy. The adjustable recording and auto hold thresholds specify a percentage change in the readings that begins a new event. The 289 features a large 50,000 count, 1/4 VGA display with a white backlight, that allows multiple sets of measurement information to be simultaneously displayed at the same time. The multimeter runs about 100 hours, 200 hours in logging mode, on 6 aa alkaline batteries, or neda 15a IEC lr6. The 289 is multi-lingual interfaced and includes the following: a manual, 6 aa batteries, a set of tl71 silicone test leads, a probe holder, and two ac72 alligator clips. An optional accessory is the 80bk-a integrated DMM temperature probe with a measurement range up to 260-degrees Celsius. The fluke 289 true-rms logging multimeter is designed to meet csa, ul, tuv, ce agency approvals, and is cat iii 1000 v/cat iv 600 v safety rated. The fluke 289 true-rms logging multimeter with trendcapture is sold one item per package.

• Stores up to 15,000 recorded events
• Real time clock for automatic time stamping of saved readings
• Large 50,000 count, 1/4 vga display with a white Backlight
• Low impedance voltage function prevents false readings due to ghost voltage
• Unique logging and graphing capabilities mean you no longer need to download logged readings to a PC to detect a trend
• Stores up to 15,000 recorded events.Electromagnetic compatability EMC EN6 1326-1
• Real time clock for automatic time stamping of saved readings
• Large 50,000 count, 1/4 VGA display with a white backlight

User questions & answers

Question:	Does it log only voltage or also current ac and dc
Answer:	Most of the functions I've used can all be logged. I'm pretty sure each option on the meter can be logged.
Question:	Is this meter accurate in the mOhm ranges? I need to use this for milli-ohm bonding checks in the 10 to 50m ohm range
Answer:	The range your referring to I believe is the 50ohm not 50mohm range. I use it for motor windings, relay coils and solenoids. Works great for readings from 1-50ohm and is very accurate in that range. If you are needing to measure a bond, connection joint or anything less than 1ohm you want something capable of making a kelvin 4-wire measurement. the fluke 8845 bench meter works great for bench applications. It all depends on your application? the 8845 is more for bench work. If your in the field working with ground grid connections, medium voltage transformers or breakers I would suggest looking at Fluke ground testers, AMEC or MEGGER micro-ohm meters that will put out some current and be more rugged. The fluke 289 is a great meter. I use the 50hm range allot as and I really like being able to record and trend.
Question:	If i order the item can i use it one a switch on or i need to download something and is it made in u.s or china...Thanks
Answer:	No need to download anything. Made in China
Question:	What comes inside the box
Answer:	It comes in a fluke soft case - AC220 Sure Grip Alligator clip setAC280 Sure Grip Hoot Clip SetAC285 Sure Grip Large Jaw Alligator Test Clip SetTP224 Sure Grip Silicon Test LeadsTP220 Sure Grip Test Probe SetFluke TPAK Meter Magnet Hanging KitFluke 80BK Temperature Probe

Product features

Fluke 289 True-rms Industrial Logging Multimeter

The high-performance Fluke 289 True-rms Industrial Logging Multimeter is designed to solve complex problems in electronics, plant automation, power distribution, and electro-mechanical equipment. It gives you the ability to log data and review it graphically onscreen so you can solve problems faster and help minimize downtime.

Work safer, smarter and faster with Fluke Connect enabled wireless test tools

With the Fluke Connect app and enabled tools you can view multiple measurements of energized components from up to 20 feet away from the test point. Set up multiple modules and then step out of the hazard zone and remotely view all the measurements simultaneously on a smart phone. By keeping your distance from energized components you can increase your personal safety and efficiently.

Reduce maintenance time and increase uptime

View different measurements—thermal, mechanical, electrical and vibration—from the same piece of equipment at the same time. Seeing the interactions among multiple measurement points can help you spot problems quicker. You can automatically record measurements and upload them to a PC for further analysis and reporting, and save to secure cloud storage. From there, authorized users can easily access baseline data in the field to quickly identify anomalies and resolve problems.

Collaborate with colleagues without leaving the plant floor

Onsite techs can share measurements, graphs and even thermal images with team members located anywhere via a ShareLive video call. Everyone on the call can see the same live data and images on their smart phones. Managers can see all the information they need to issue a work order so technicians can move forward with repairs without leaving the field. That saves extra trips back and forth to the office and helps ensure problems are resolved faster with less downtime.

Improve safety

View live measurements of energized electrical panels or operating mechanical equipment from a safer distance. May help reduce PPE requirements.

Increase productivity

Make short work of routine maintenance and troubleshooting. Log and monitor live measurements from multiple test points at the same time.

Enhance collaboration

Share live measurements and thermal images with team members at other locations to get troubleshooting help and quick work order approvals.

Product description

The Fluke 177 Digital Multimeter features 0.09 percent basic DC voltage accuracy. Have a Backlight to Illuminate the Screen in Dark Workspaces. 6000 counts, updates 4 x second digital and 33 segments, updates 40 x second analog bar graph display. Automatically turns off after 2 minutes to save battery life; the timeout feature can be disabled by a power-up option. Hold: freezes the display at the push of a button; auto hold: display holds present reading until it detects the new stable input, then the meter beeps and displays new reading. Minimum, maximum, and average reading memory; In auto range, the meter selects the range with the best resolution for the present measured value. The beeper sounds with a stretched pulse for opens or shorts as brief as 250 microseconds; The message "LEAd" appears briefly on the display when the rotary switch is moved to or from any A (Amps) position. Turn on all LCD segments, Disable beeper, Disable sleep mode, Enable smoothing. The instrument comes with built-in probe holders for probe storage and for convenience when making measurements. Battery replacement without voiding calibration. The integrated overmolded protection provides superior impact protection for your meter. Lifetime warranty. IEC 1010 CAT IV 600V, CAT III 1000V Safety Ratings.

From the Manufacturer

Fluke corporation is the world leader in the manufacture, distribution and service of electronic test tools and software. These can trigger a sequence of events that may lead to serious injury. This is why test equipment must be designed to protect people who work in this high-Voltage high-current environment. The fluke 177 esfp true RMS digital multimeter is compact, rugged, reliable, and easy to use. Unlike averaging meters, which can accurately measure only pure sinewaves, true RMS meters accurately measure distorted waveforms. Calculating true RMS converters require a certain level of input voltage to make a measurement. The ac voltage and current ranges are specified from 5-Percent of range to 100-Percent of range. The selectable ac filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or is noisy. The 177 is multi-lingual interfaced (eng, sp, fr, por), and features a 6000-count, 3-3/4-digit backlit display and a bar graph. Because the bar graph updates about 40 times per second, which is 10 times faster than the digital display, the bar graph is useful for making peak and null adjustments and for observing rapidly changing inputs. The min max avg recording mode captures the minimum and maximum input values, and calculates a running average of all readings. When a new high or low is detected, the meter beeps. The external accessible battery is easy for battery changes. The 177 runs about 200 hours without backlight on one 9-Volt battery (included). Also included are a user's manual and a set of test leads. An optional accessory is the 80bk-a integrated DMM temperature probe with a measurement range up to 260-degrees Celsius. The 177 meets cat iii and cat iv IEC 61010 standards. The fluke 177 esfp true RMS digital multimeter is sold one item per package.

• 6000 counts, updates 4 x second digital and 33 segments, updates 40 x second analog bargraph display
• Automatically turns off after 2 minutes to save battery life; the timeout feature can be disabled with a power up option
• Hold: Feezes the display at the push of a button; Auto hold: Display holds present reading until it detects new stable input, then the meter beeps and displays new reading
• Minimum, maximum, and average reading memory; in auto range, the meter selects the range with the best resolution for the present measurement value
• The message "Lead" appears briefly on the display when the rotary switch is moved to or from any a (amps) position
• Manual and automatic ranging with display hold and auto hold
• Frequency and capacitance measurements; resistance, continuity and diode measurements

User questions & answers

Question:	is this made in usa
Answer:	To be honest I don't know. Looking at the owners manual, there is no mention of the phrase ESFP. The book calls it a True-rms multimeter.You could contact Fluke at www.fluke.com and maybe get an answer there. I like the meter, very durable and relay able use it every day.
Question:	Is the Fluke 177 much better than the Fluke
Answer:	Shows distance to break. To test the far end you will need to use the attached receiver cap. With the cap you will also see any wiring with the wrong mapping. If you are looking for a unit to certify wired runs this is not the unit for that. As this unit will only tell you if the wire is termed correctly, plugged into a switch, plugged into phone service, and check POE, and give you the detailed info a proper certifying unit will.I also used this to diagnose a customers speaker issue. Made a cable to attach to the fluke. Gave me distance to the break and saved me a ton of time.
Question:	Is this multimeter good for electronics? i'm an electronic engineering student and i need a multimeter for iot, ic's and college, etc
Answer:	The main unit displays the correct or incorrect wiring. The remotes allow the tech to isolate the individual cables in a multi-cable run.
Question:	What does ESFP signify
Answer:	There are seven unique identifiers. The wiremapping remote that is snapped on to the top of the tester is #0, and the additional ones in the kit are #1 - #6. You can buy more sets of remotes, but they will all be numbered #1 - #6 as well, so they won't be unique. Typically people move them around to map out their network rather than connect a large number at one time.

Product features

Fluke 177 True RMS Digital Multimeter

Electrician's Dream!

With its precision, reliability and ease of use, the Fluke 177 Digital Multimeter is the preferred solution for professional technicians worldwide. Independently tested for safe use in CAT IV 600 V/ CAT III 1000 V environments, the Fluke 177 is the industry standard with all the features you need to troubleshoot and repair many problems in electrical and electronic systems.

The Fluke 177 Digital Multimeter gives you True-rms voltage and current measurements, 6000-count resolution, manual and automatic ranging and provide frequency, capacitance, resistance, continuity and diode measurements. In addition, the Fluke 177 provides higher 0.09% basic accuracy, a digital display with analog bar graph and backlight.

Product description

Now you can work in two places at once. With the new Fluke 233 wireless remote display Multimeter you donâ€tmt need the help of another person when reading the display. Standing on ladders, tangling long Test leads, or calling on a second person while testing are all now a thing of the past. Measure safely while placing the meter in hazardous areas, in clean rooms or near moving machinery. The Fluke 233 is a tool that will make your job easier. Operating Temperature: -40°C to +400°C.

From the Manufacturer

As electrical systems grow more and more complex, spikes, transients, surges, and sudden over voltage events become more common. These can trigger a sequence of events that may lead to serious injury. This is why test equipment must be designed to protect people who work in this high-voltage high-current environment. The Fluke 233 Remote Display Multimeter is compact, rugged, reliable, and easy to use. The 233 features True-rms AC voltage and current for accurate measurements on non-linear signals, and it measures up to 1000 volts AC and DC, and 10 A (20 A for 30 seconds). The meter has Min/Max and Average recording to capture variations automatically and it performs resistance, continuity and diode tests. The low power wireless technology allows the large digit display with backlight to be carried up to 10 meters (33 feet) away from the point of measurement for added flexibility and no interference with measurements. The built in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument. The removable magnetic display can be conveniently mounted where it is easily seen and allows you to take measurements without holding the meter to improve visual focus on probes and augment safe electrical measurements. The 233 Multimeter includes five AA batteries and runs approximately 400 hours with the meter's auto power off feature. The meter also includes the following: a test lead set, alligator clip set, 80BK-A Temperature Probe, CD-ROM, and user's manual. The Fluke 233 Remote Display Multimeter is covered by a three year warranty and is old one item per package.

• Removable magnetic display can be conveniently mounted where it is easily seen
• Built in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
• Battery life: 400 hours
• True-rms AC voltage and current for accurate measurements on non-linear signals
• Low power wireless technology allows the display to be carried up to 10 meters (33 feet) away from the point of measurement for added flexibility
• Removable magnetic display can be conveniently mounted where it is easily seen
• Built in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
• Battery life: 400 hours

User questions & answers

Question:	What are the actual dimensions of this meter
Answer:	The dimensions of the FLUKE-233 are as follows: 5.3 cm x 5.3 cm x 19.3 cm (2.08 in x 2.08 in x 7.6 in) and it weighs 604 g (1.3 Ib). Ram Meter Inc. Sales / Customer Service
Question:	For those users who have purchased this recently (in 2016) have you had any battery drain issues
Answer:	I purchased this in 2014 and the batteries in mine drain when not in use. I am using quality Eneloop rechargeable batteries. And more times then not I have to replace them after the unit sits for a week or two. I end up taking the batteries out every time I use it which is very inconvenient.
Question:	is it durable
Answer:	Yes. I have been using it in an industrial atmosphere for several months and have found it durable, dependable, and safe to use. I have weaker eyesight and in most places cannot have the meter in front of me so I am able to use this one very well and it is safer to use as I am able to concentrate on where I am putting the probes better without missing any spot and hitting it with my hands. I have two fluke meters, but this one is the one I choose for troubleshooting due to the remote aspect. I hope this is a satisfactory response. I would encourage anyone who is in industrial repair or design to have one.
Question:	I would like to know the dates of mfg and had the battery drain issue been resolved on the meter you're selling
Answer:	Serial numbers greater than 225000000 will have updated firmware. This would be from January of 2013 on.

Product features

Fluke 233 Remote Display Digital Multimeter

With its removable display, the Fluke 233 Digital Multimeter with True RMS gives you the flexibility to take measurements in hard to reach places or in areas with restricted access. You can be in two places at once and reduce the risk of arc flash by separating yourself from hazardous measurement situations. Built in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument. Low power wireless technology allows the display to be carried up to 33 feet away from the point of measurement for added flexibility. Make measurements without holding the meter to improve visual focus on probes and augment safe electrical measurements. The removable magnetic display can be conveniently mounted where it is easily seen or use as a conventional multimeter when the display is connected.

Product description

Fluke has combined the Rugged 179 true-rms Multimeter with a built-in thermometer and the 323 AC Current Clamp. The combo pack provides you the functionality needed to effectively and quickly identify and troubleshoot most electrical and electromechanical problems.

• Industrial thermometer combo kit
• Full featured DMM with advanced electronic troubleshooting functions plus probes

User questions & answers

Question:	Does this come with a case
Answer:	I don't know. Contact Fluke!!!
Question:	Is it Made In USA with USA Made Parts
Answer:	No ... Only FC series instruments are equipped to communicate wirelessly.

Product features

Fluke 179 IMSK Industrial Multimeter Service Kit

This kit combines the Fluke 179 True-RMS DMM and the Fluke 323 True-RMS clamp meter. They are rugged, reliable and accurate, as well as extremely easy to operate.

The Fluke 179 is the preferred solution for professional technicians. It includes the features you need to troubleshoot and repair electrical and electronic systems. The Fluke 323 clamp meter is designed to perform in the toughest environments and provide noise-free, reliable results, to confidently diagnose problems almost anywhere.

Fluke 179 True-RMS Digital Multimeter Increases Productivity

Delivers accurate true-rms AC current and voltage plus frequency, capacitance, resistance, continuity and diode measurements. Increases productivity with manual and automatic ranging, Display Hold, Auto Hold, and Min/Max-average recording.

Fluke 179 True-RMS Digital Multimeter Features

Includes a built-in thermometer to measure temperature without having to carry a separate instrument

Fluke 323 True-RMS Clamp Meter Features

The 323-clamp meter provides true-rms measurements, optimized ergonomics, and large display for efficient troubleshooting. Designed to perform in the toughest environments and provide noise-free, reliable results, to diagnose problems almost anywhere.

Fluke 323 True-RMS Clamp Meter for Multiple Measurements Types

Rugged, reliable basic true-rms clamp meter for measuring current up to 400 A. Measures AC current to 400 A. Measures AC voltage and DC voltage to 600 V. Provides true-rms AC voltage and current for accurate measurements on non-linear signals. Measures resistance to 4 kΩ with continuity detection.

Product description

Pack of 5 pieces, DMM-11 (DMM-11A, DMM11) 11A 1000V Fluke 803293 Digital multimeter replacement Fuse by Fluke BUSSMANN

User questions & answers

Question:	Is this the replacement fuse for Fluke
Answer:	Yes
Question:	Is this replacement fuse for fluke
Answer:	Yes