10 best circuit breaker testers

Product description

The Klein Tools ET310 Circuit Breaker Finder with Integrated GFCI Outlet Tester is a digital circuit breaker finder used to locate the correct circuit breaker in a panel to which an electrical outlet or fixture is connected. The Transmitter is connected to the electrical outlet or fixture in the circuit while the receiver is used to scan the breakers in the circuit panel. The Transmitter also features a GFCI outlet tester. Circuit Breaker Finder locates the correct breaker in a panel. Tester consists of two parts: a Transmitter and a Receiver. GFCI Outlet Tester integrated in receiver. Transmitter docks in the Receiver for convenient storage as a single item when tester is not is use. Transmitter incorporates a three-pin plug for connecting to North-American-style grounded electrical outlets. The transmitter may be connected to other electrical fixtures using optional accessories which are sold separately (Cat. No. 69411). Receiver powers off automatically after approximately three minutes of non-use to conserve battery life. Transmitter is powered by the circuit when connected to the electrical outlet or fixture. Low battery indicator. Easily accessible battery compartment. Uses one 9V battery in receiver only; Transmitter does not require a battery. Built to withstand a 6.6-Foot (2 m) drop. CAT II 120V safety rating. Measurement Category II is applicable to test and measuring circuits connected directly to utilization points (socket outlets and similar points) of the low-voltage MAINS installation. Includes Transmitter, Receiver, user manual, and 9V battery (for Receiver). For more than 160 years, Klein Tools has manufactured premium-quality, professional-grade hand tools that deliver the performance, durability and precision needed to get the job done right. Our family of engineers, workers and craftsman continue to put six generations of expertise into every tool we create by using only the highest quality materials, superior workmanship, and keeping manufacturing as close to home as we can. Klein isn't just the name of our company, it's also our family name. And since we're an American company that's family-owned and family-run, you know you can count on us to be here tomorrow. Klein Tools doesn't just make great products, we make great products that stand up to the demands of the professionals who use them every day ... Since 1857.

• This circuit breaker finder can quickly and accurately locate the correct circuit breaker in a panel corresponding to the circuit to which an electrical outlet or fixture is connected
• Tester consists of two parts: a Transmitter, connected to the electrical outlet or fixture and a Receiver, used to scan the panel to locate the correct breaker
• Receiver delivers clear visual and audible indications when the correct breaker has been located
• Operates on 90-120V AC circuits
• Transmitter incorporates a GFCI outlet tester to inspect the wiring condition at the electrical outlet and test GFCI devices

User questions & answers

Question:	klein tools 69411 is this part available
Answer:	No half sizes
Question:	Why don’t they have one for high voltages
Answer:	Yes. I've had mine a couple months and wear them multiple times a week. Still no leaks.
Question:	The et-300 claims a range of 1000 ft, i cannot find that spec on the et-310. what is the range on the newer model
Answer:	I would go up to 14
Question:	Does this tester have a variable sensitivity wheel? Or is that indeed why some people said it was nearly worthless determining the correct breaker
Answer:	They are lighter than my steel toe work boots, but really, I wear a size 14, no footwear is light for me, besides flipflops.

Product features

AC Circuit Breaker Finder with Integrated GFCI Outlet Tester

The Klein Tools ET310 Circuit Breaker Finder with Integrated GFCI Outlet Tester is a digital circuit breaker finder used to locate the correct circuit breaker in a panel to which an electrical outlet or fixture is connected. The Transmitter is connected to the electrical outlet or fixture in the circuit while the receiver is used to scan the breakers in the circuit panel. The Transmitter also features a GFCI outlet tester.

Product description

With this digital circuit breaker finder quickly, accurately, and automatically find the corresponding circuit breaker of any 120V standard electrical outlet. The flashing arrow indicator lets you quickly identify when you've got a hit. The strong transmitter reaches up to 1000 feet. The auto power-off feature saves battery life and gives you one less thing to worry about. Circuit Breaker Finder has 90 - 120V operation. Microprocessor controlled for more reliable identification. Includes a 2-year warranty. Auto power-off feature saves battery life. Accessory kit (Cat. No. 69411, sold separately) includes light socket adapter and alligator clip assembly. For more than 160 years, Klein Tools has manufactured premium-quality, professional-grade hand tools that deliver the performance, durability and precision needed to get the job done right. Our family of engineers, workers and craftsman continue to put six generations of expertise into every tool we create by using only the highest quality materials, superior workmanship, and keeping manufacturing as close to home as we can. Klein isn't just the name of our company, it's also our family name. And since we're an American company that's family-owned and family-run, you know you can count on us to be here tomorrow. Klein Tools doesn't just make great products, we make great products that stand up to the demands of the professionals who use them every day ... Since 1857.

• This circuit breaker finder can find the corresponding circuit breaker of any 120V standard electrical outlet quickly, accurately, and automatically
• Flashing arrow indicator for easy identification
• Strong transmitter reaches distances up to 1000-feet
• 90 to 120V operation
• Microprocessor controlled for more reliable identification

User questions & answers

Question:	Can i plug it in and see what Outlets are on that circuit breaker can I use the finder down the line at the different outlets on that breaker to trace
Answer:	Take to shoe repair they can fix
Question:	Does the plug in part have an indicator light on it to confirm its operational and that the outlet is live
Answer:	yes .and good fit
Question:	can this item find the breaker if the power is off
Answer:	Yes, and a great boot for the money. Warm and light weight.
Question:	How dose this work
Answer:	My husband wears a 10 and I purchased a 9. He loves them! Best pair I've ever Gotten him.

Product features

Circuit Breaker Finder, Finds Electrical Circuit Breaker of 120V Standard Electrical Outlet

Quickly, accurately, and automatically find the corresponding circuit breaker of any 120V standard electrical outlet with this digital circuit breaker finder. The flashing arrow indicator lets you quickly identify when you've got a hit. The strong transmitter reaches up to 1000 feet.

Product description

This 2-Piece Klein Tools Digital Circuit Breaker Finder with GFCI Outlet Tester and Circuit Breaker Finder Accessory tool kit does more than just indicate standard circuits. Adapters in this kit indicate the correct breaker of bare wires or other exposed conductors. The Transmitter is connected to the electrical outlet or fixture in the circuit while the receiver is used to scan the breakers in the circuit panel. The Transmitter also features a GFCI outlet tester. Circuit Breaker Finder locates the correct breaker in a panel. Tester consists of two parts: a Transmitter and a Receiver. Includes light socket, 3-to-2-prong, and alligator clip adapters. Light socket adapter for finding the correct circuit of a lighting fixture. Alligator clip adapter enables use on bare wires. For more than 160 years, Klein Tools has manufactured premium-quality, professional-grade hand tools that deliver the performance, durability and precision needed to get the job done right. Our family of engineers, workers and craftsman continue to put six generations of expertise into every tool we create by using only the highest quality materials, superior workmanship, and keeping manufacturing as close to home as we can. Klein isn't just the name of our company, it's also our family name. And since we're an American company that's family-owned and family-run, you know you can count on us to be here tomorrow. Klein Tools doesn't just make great products, we make great products that stand up to the demands of the professionals who use them every day ... Since 1857.

• Circuit Breaker Tool Kit can help quickly and accurately locate the correct circuit breaker in a panel corresponding to the circuit to which an electrical outlet or fixture is connected
• Digital Circuit Breaker Finder with GFCI Outlet Tester (Cat. No. ET310) receiver delivers clear visual and audible indications when the correct breaker has been located
• Operates on 90-120V AC circuits
• Transmitter incorporates a GFCI outlet tester to inspect the wiring condition at the electrical outlet and test GFCI devices
• Circuit Breaker Finder Accessory Kit ( Cat. No. 69411) includes standard 3-prong to 2-prong grounding adapter

User questions & answers

Question:	how long is this item when the the gfci tester is plugged in to the tracer? (wondering if it will fit in my tool bag) thanks
Answer:	It should as long as you can run the probe along the affected wire in question.

Product features

Circuit Breaker Finder Tool Kit with Accessories, 2-Piece Set, Includes Cat. No. ET310 and Cat. No. 69411

This 2-piece Klein Tools Digital Circuit Breaker Finder with GFCI Outlet Tester and Circuit Breaker Finder Accessory tool kit does more than just indicate standard circuits. Adapters in this kit indicate the correct breaker of bare wires or other exposed conductors. The Transmitter is connected to the electrical outlet or fixture in the circuit while the receiver is used to scan the breakers in the circuit panel.

Product description

Sperry Instruments CS550A Circuit Breaker Finder, Quickly Locate AC Circuits/Fuses, Visual LED, Plug Style Transmitter/Auto-Sensing Receiver, 80-140V

From the Manufacturer

Circuit Breaker Finder. By using a transmitter and receiver, this circuit breaker finder quickly and easily identifies individual branch circuits at the panel box without interrupting power. It is the best way to accurately locate circuit breakers. They are compact in size and extremely easy to use. UL listed to both US and Canadian standards. Locates AC Breakers or Fuses. No need to interrupt Power. Distinctive Signal, Audible and Visual Indication. Does not interfere with sensitive electronic equipment. Uses one 9V battery not included. Includes one transmitter and one receiver.

• QUICKLY AND EASILY: identifies correct circuit breaker or fuse protecting a specific electrical circuit
• SAFE FOR USE NEAR: Sensitive electronic equipment and no need to interrupt power when using
• INCLUDES: A plug style transmitter and an auto sensing receiver
• AUDIBLE ALERT AND BRIGHT LED: Visual indication on both transmitter and receiver
• DESIGNED FOR: Operation at 120V AC, 50-60Hz - UL Listed

User questions & answers

Question:	Does it work with 120v/240V
Answer:	I wore them in 25 degree weather with a pair of wool sock super warm. went thru a couple creeks no leak great boot
Question:	Can I use this to check which wall light switch goes to which circuit breaker
Answer:	I didn't have any problem keeping my feet dry but I wouldn't recommend them for cold weather
Question:	Will this tester work on an outlet that doesn't have power
Answer:	Child weather they are fine if you cab keep moving. They do make your feet sweat, that's why i said of you can keep moving. Freezing weather i wouldn't chance it. Also of you have bog calves that make it hard to get off.
Question:	Is this Sperry circuit finder made in China
Answer:	The pair I bought are true to size.

Product features

Sperry Instruments CS550A Circuit Breaker Finder

Sperry makes the job of locating electrical circuits (AC circuits of 110-125 volts) quick and easy. Turning off the correct breaker is critical when considering work on an electrical circuit and can take an excessive amount of time using "trial and error" until you hit the right one. This Circuit Breaker Finder features a sending unit which you plug into a receptacle in the room where you want to work and a receiving unit which you use to test the breakers to correctly identify the right breaker every time. The receiver features both a visual flashing light and an audible beeping to alert you when the correct breaker is identified. The package includes a user manual and a 9 volt battery required for the receiver unit.

Sperry Instruments CS61200P Circuit Breaker Finder Kit

Trace circuits to detect appropriate breaker. Turning off the correct breaker is critical when considering work on an electrical circuit and can take an excessive amount of time. The Breaker Finder is an integrated tool used to correctly identify the right breaker every time. The signal is generated by a plug style tool that also verifies the correct wiring of outlets and includes GFCI test functionality. The custom probe design indicates the signal strength through both and audio tone and visual strength indication. Magnets located on the tester allow for easy placement and operation. The nested design of the tone generator means that the units will not be separated during transport or storage.

Product description

all in one Circuit Breaker Finder protective case for Klein Tools ET310 AC Circuit Breaker Finder, Integrated GFCI Outlet Tester and Accessory Kit

also universal for Ideal Industries - IDI61534, PTE Wire Tracer & Circuit Tester, VersativTech Circuit Breaker Kit

Mesh pocket for other accessories

Compact and storage easy case

Easy to go detachable wrist strap

Note: Protective Case ONLY, device or accessories NOT INCLUDED ( for illustration only)

• Perfect for: consolidation case for CaseSack Circuit Breaker Finder Consolidation case for Klein Tools ET310 AC Circuit Breaker Finder, Integrated GFCI Outlet Tester, RT310 Receptabcle and Accessory Kit, Mesh pocket for other accessories
• Featured handy caser: all in one case for ction
• Assured Protection: Semi-hard carrying case protecting the device from shock, shake, scratch. PEVA materials with pressure or hit absorbing and water resistant
• User friendly design: Strong compact light weight case with featured handle and shoulder strap. Good for home storage and travel carrying
• Worry-free Guanrantee: CaseSack offer 100% refund with quality problem. Only protective case for sales only, Device or accessories sold separately. CLICK the orange button to buy. Share with your review later on.

Product description

Klein Tools Digital Circuit Breaker Finder with GFCI Outlet Tester ET310

Klein Tools Digital Circuit Breaker Finder with GFCI Outlet Teste



Circuit Breaker Finder Accessory Kit, Circuit Breaker Leads, Circuit Breaker Adapters Klein Tools 69411

Circuit Breaker Finder Accessory Kit

• Product 1: This circuit breaker finder can quickly and accurately locate the correct circuit breaker in a panel corresponding to the circuit to which an electrical outlet or fixture is connected
• Product 1: Tester consists of two parts: a Transmitter, connected to the electrical outlet or fixture and a Receiver, used to scan the panel to locate the correct breaker
• Product 1: Receiver delivers clear visual and audible indications when the correct breaker has been located
• Product 1: Operates on 90-120V AC circuits
• Product 2: For use with ET300 and ET310 Digital Circuit Breaker Finder
• Product 2: Light socket adapter for finding the correct circuit of a lighting fixture
• Product 2: Alligator clip adapter enables use on bare wires
• Product 2: Includes standard 3-prong to 2-prong grounding adapter

User questions & answers

Question:	Case or carry bag included
Answer:	A: I have a door bell button as a garage door opener. It was there when I bought the house. I’m actually looking for a nicer looking switch on amazon right now to replace it and I came across this question.
Question:	That light bulb adapter does not have a ground so how does it work with that tracer
Answer:	The measurements are 3 x 3/4 x 3/4 inches. Screws are 1 inch long and 2 1/8 inches apart.

Product description

Locates the correct circuit breaker or fuse without turning off the power. Simply plug the transmitter into an outlet and trace for the correct breaker at the electrical box. Transmitter also verifies wiring and tests GFCI operation. Bright red and green LEDs indicate if receptacle is correctly wired or will indicate which of the 5 fault conditions exists. Convenient storage position for transmitter/receptacle tester. Complete with Receiver, GFCI Transmitter, and 9V battery.

• Simply plug the GFCI Transmitter into an outlet and trace for the correct breaker at the electrical box
• IR resolution - 43,200 (240x180) pixels - far exceeds RESNET standard; Measurement modes include 3 Spots, 3 Area Box, Isotherm, Auto Hot/Cold spots
• UL Listed and CE approved
• Tests GFCI circuits
• LED indication of 2 test conditions and 5 wiring faults

User questions & answers

Question:	Can this trace a wire routing through the wall
Answer:	It's configured for 120 though you'd have to read the specs to see a out 240.
Question:	I have outlets wired in series: some NM. some metal-shielded. Can I detect signal in accessible wires "halfway" to the breaker to confirm route
Answer:	That would be a bit more difficult. You would have to replace the bulb with one of those socket adapters that have the socket and outlets to plug in cords. I think that would work to find the right breaker since you could plug in that part of the detector.
Question:	Will this product detect a bootleg ground
Answer:	No, the circuit must have power to generate a signal that is traceable to the breaker panel.
Question:	Can you use this to trace the outlet to its circuit breaker if the circuit breaker is damaged or off
Answer:	There is nothing on the product to indicate that it is. The item is UL approved, sturdy, and works very well. You can find Sperry on Facebook and ask your question there.

Product features

Fast operation

Quickly locate 110V to 125VAC circuit breakers and fuses.

Multi-sensory signals

Flashing LEDs and audible beeper for circuit breaker indication.

Adjustable sensitivity

Variable Sensitivity adjustment to pinpoint correct circuit breaker.

Professional use

Locate branch circuit breakers without flipping breakers to other circuits, confirm proper wiring during electrical wiring installation or repair, and test receptacle ground fault operation.

Portable

Transmitter and Receiver snap together for easy storage.

Easy to read GFCI test indicators

Bright Red and Green LED’s indicate if receptacle is correctly wired or six fault conditions.

Product description

The task of locating AC circuits is now made quick and easy thanks to IDEAL Electrical. No more guessing or trial and error when it comes to locating the correct circuit breaker supplying power to an AC outlet or lighting fixture. Positively identifies circuit breakers and fuses without service interruption. Digital Receiver & GFCI Circuit Tester. Non-contact voltage sensor from 80-300VAC automatically and quickly finds correct breaker. Transmitter works on 120VAC circuits. Proper wiring is crucial to ensure safety and performance of Branch circuits. From a safety perspective, shock hazards and fires are mainly due to poor installation or failure of protective devices, such as GFCIs. If the receiver is left on and not utilized for 10 minutes (no energized AC circuit or transmitter signals are detected), it will automatically shut down to conserve its battery life.

From the Manufacturer

IDEAL 61-534 Circuit Breaker Finder with GFCI Tester

• QUICK AND EASY CIRCUIT IDENTIFICATION: The task of locating AC circuits is now made quick and easy thanks to IDEAL Electrical. No more guessing or trial and error when it comes to locating the correct circuit breaker supplying power to an AC outlet or lighting fixture. Positively identifies circuit breakers and fuses without service interruption.
• AUTOMATIC CIRCUIT IDENTIFIER: Proper wiring is crucial to ensure safety and performance of branch circuits. From a safety perspective, shock hazards and fires are mainly due to poor installation or failure of protective devices, such as GFCIs.
• RECEIVER AUTO POWER OFF: If the receiver is left on and not utilized for 10 minutes (no energized AC circuit or transmitter signals are detected), it will automatically shut down to conserve its battery life. Also features low battery detection so that you can ensure your Digital Circuit Breaker Finder is always charged and ready to use. If the battery voltage is below 7.3 volts, the receiver will beep three times and turn itself off.
• TRUSTED BRANCH CIRCUIT ANALYSIS AND TESTING TOOLS: IDEAL has a long history of providing the professional electrician with the tools and knowledge required to safely and efficiently verify and analyze Branch Circuits. So, whether you are; conducting routine measurements, testing installed devices or the integrity of a Branch Circuit, locating a breaker, or tracing wires, IDEAL has the tools for the job.
• PRODUCT DETAILS: Digital Receiver & GFCI Circuit Tester. Non-contact voltage sensor from 80-300VAC automatically and quickly finds correct breaker. Transmitter works on 120VAC circuits. Tests GFCIs. Verifies wiring configuration.

User questions & answers

Question:	Will this product be able to identify more than which outlets are related to a particular circuit; such as light switches, oven vent fans, etc
Answer:	That 69411 catalog number is for the: "Circuit Breaker Finder Accessory Kit". That was available when I purchased mine but I don't know about now with this virus problem. I do not believe that amazon will answer your question in this manor. Probably the only way to find out from Amazon is to just try ordering it and see what your response will be.
Question:	I have 220vac outlets, if the remote plug-in unit only works with 110vac can I go one side to ground and simulate a 110 circuit to find each breaker
Answer:	I am not sure but I would suspect code for high voltage lines should be properly marked for identification.
Question:	Does the power have to be on for the tester to work
Answer:	I don't know but im sure that the circuit wiring configuration along with the load center configuration will effect it's operating range. There are several variables that can effect the tester's operation.
Question:	Does it work for higher voltage like 220 v
Answer:	Does not have a sensitivity wheel, I’ve had no issues with it usually within one breaker its spot on. Just have to hit reset if u skip over the correct one to clear memory before re scanning

Product features

Electrical Testing

We’ve been helping electricians safely verify and analyze electrical systems since 1924. Our testers are highly accurate and respected across the world. From our innovative circuit tracers to reliable voltage testers to clamp meters, IDEAL has the tools to help you get the job done safely and efficiently.

We’ve been committed to craftsmen for more than 100 years. Whether you’re the electrical contractor or datacomm technician, production engineer or plant manager, we know the job .

WE ARE IDEAL ELECTRICAL: POWERING THOSE WHO POWER OUR WORLD

J. Walter Becker’s founding principles remain the guiding force behind our partnerships with the world's leading distributors, a state of the art delivery system around the world, outstanding customer and technical support and variety of operational benefits designed to save you time and money.

We're proud of the way we do business, and always have been. The work we do through IDEAL Electrical is just one more way we are building an IDEAL world.

Product description

Southwire's 60030S Circuit Breaker Finder Adapter/Accessory Kit includes a light bulb socket adapter and alligator clips for tracing branch circuits. Designed for use on 120Vac circuits, the 60030S is ideal for any residential testing and is compatible with Southwire's 41210S Circuit Breaker Finder. The included alligator clips allow the transmitter to be connected to unterminated branch circuit wiring. The included light bulb circuit adapter allows for rapid location of circuit breakers connected to lighting fixtures.

• RELIABLE Circuit breaker finder kit Is the perfect accessory for your circuit breaker tracer (Compatible with Southwire’s 41210S circuit breaker finder)
• PERFECT ELECTRICAL ACCESSORY for use on 120V AC circuits
• ALLIGATOR CLIPS that allow the transmitter to be connected to unterminated branch circuit wiring
• LIGHT BULB CIRCUIT ADAPTER that allows for rapid location of circuit breakers connected to lighting fixtures
• 2 year warranty

User questions & answers

Question:	Can this help trace wires not yet connected to the panel? What's a product that can do that
Answer:	You could also hook up a 9-volt battery on 1/2 end of the circuit and then use a Multimeter to find the other
Question:	Can you use this to find a 2pole brkr? Ex. Roof top ac unit disconnect, unit it powered on, clip one lead to one of the hots, and one lead to ground
Answer:	I would think in theory that should work. But I have not tried tracing 1/2 of a 240-circuit as you describe.
Question:	Can this be used with ideal circuit breaker finder? it seems only has 2 prong on the light bulb adapter
Answer:	Get a ground lift and then yes it will work
Question:	Will this work with the klein tools et300 circuit breaker finder
Answer:	I am using this with the et300. It works fine. I think it would work with any circuit tester.

Product features

Circuit Breaker Finder Kit

Find the correct breaker easily and quickly!

Product description

Trace circuits to detect appropriate breaker. Turning off the correct breaker is critical when considering work on an electrical circuit and can take an excessive amount of time. The Breaker Finder is an integrated tool used to correctly identify the right breaker every time. The signal is generated by a plug style tool that also verifies the correct wiring of outlets and includes GFCI test functionality. The patented probe design indicates the signal strength through both and audio tone and visual strength indication. Magnets located on the tester allow for easy placement and operation. The nested design of the tone generator means that the units will not be separated during transport or storage.

From the Manufacturer

Sperry Instruments Circuit Breaker Finder Kit. Durability, accuracy, and safety are the hallmark of tried and true tester products. The Sperry Instruments name has been synonymous with quality, precision, and dependability for over forty years.

• Quickly and easily identify correct circuit breaker or fuse protecting a specific electrical circuit
• Designed for operation at 120V AC, 60Hz
• Audible alert and bright LED visual indication
• Magnetic back attaches to electrical panels for inchhands-free inch operation
• When used with CS61200AS accessory kit, unit can trace switches, light fixtures, and other energized wiring
• Integrated lead and probe storage
• Operates from one 9 volt battery

User questions & answers

Question:	Btw amazon photo shows 2 pack logo! even though you only get one set
Answer:	NO! It is, and the specs say, it is for 120vac. House wiring is 120vac. If you are wondering about 220vac, then you are probably thinking (giving you the latitude here, that you know about 220vac house service (which can be either 2 or 3 phase). Only one of those phases is used within the normal house receptacles. Even if you just look at the regular 3 prong plug between the two larger devices, you will see that is is the expected 120vac plug. A 220vac plug looks quite a lot different. Anyone trying to diagnose the (2 or 3) multi-phase service would typically just diagnose one phase at a time. So this *could* be used to troubleshoot 220vac - AS LONG AS you are just diagnosing *one phase at a time*. If you don't have clue as to what I have just spoken about then leave it alone! You are, in the least, going to waste your money, or burn out something, and at worst, possibly burn your house down. Get an electrician to help you out.
Question:	Does anyone else have issues with the sensitivity of this unit? I can't pinpoint a breaker, just a range of at least 5-6 push it to max
Answer:	Yes! Do this at your own risk, obviously. For some of the circuits in my house, the signal from the transmitter was too weak for the detector to pick it up through the breaker switch itself, but scanning the wires always worked.
Question:	Will this work on220 volt
Answer:	If you just need to test for continuity then you can put an rj45 jack on each end and tone one end and test the other you can see if you have continuity
Question:	If you take the breaker plate off can you get a better indication on a specific wire going into a breaker
Answer:	you will still have to connect the generator to the cable somewhere. since they are low voltage it should work.

Product features

Sperry Instruments CS550A Circuit Breaker Finder

Sperry makes the job of locating electrical circuits (AC circuits of 110-125 volts) quick and easy. Turning off the correct breaker is critical when considering work on an electrical circuit and can take an excessive amount of time using "trial and error" until you hit the right one. This Circuit Breaker Finder features a sending unit which you plug into a receptacle in the room where you want to work and a receiving unit which you use to test the breakers to correctly identify the right breaker every time. The receiver features both a visual flashing light and an audible beeping to alert you when the correct breaker is identified. The package includes a user manual and a 9 volt battery required for the receiver unit.

Sperry Instruments CS61200P Circuit Breaker Finder Kit

Trace circuits to detect appropriate breaker. Turning off the correct breaker is critical when considering work on an electrical circuit and can take an excessive amount of time. The Breaker Finder is an integrated tool used to correctly identify the right breaker every time. The signal is generated by a plug style tool that also verifies the correct wiring of outlets and includes GFCI test functionality. The custom probe design indicates the signal strength through both and audio tone and visual strength indication. Magnets located on the tester allow for easy placement and operation. The nested design of the tone generator means that the units will not be separated during transport or storage.