13 best portable workbenches

Product description

BLACK and DECKER 'WorkMate Original Jaws' resist warping and swelling. Quality steel tube construction for durability. Includes swivel pegs and integral retention grooves in jaws for versatility and holding reliability in clamping different materials. Opens and closes eas ily for simple set up and clean up. Specifications: Bench Height - 29-3/4; Parallel Clamping - 4-5/8; Diagonal Clamping - 24; Parallel Peg Clamping - 10-3/4; Diagonal Peg Clamping - 22-3/8; Work Surface - 9x 24; Weight Capacity-350 lbs. Amazon.com Black & Decker WM125 Workmate 125 350 Pound Capacity Portable Work Bench is a necessity for the serious craftsman. Weighing only 15 pounds, this heavy-duty workbench holds up to 350 pounds to accommodate a wide variety of projects. Dual clamp cranks and four swivel pegs can be angled for unique jobs when clamping a variety of materials. Jaws resist swelling and warping over time. Non-skid feet prevent sliding while you work. The bench folds flat for compact storage.

Black & Decker WM125 Workmate 125 350 Pound Capacity Portable Work Bench is a necessity for the serious craftsman. Weighing only 15 pounds, this heavy-duty workbench holds up to 350 pounds to accommodate a wide variety of projects. Dual clamp cranks and four swivel pegs can be angled for unique jobs when clamping a variety of materials. Jaws resist swelling and warping over time. Non-skid feet prevent sliding while you work. The bench folds flat for compact storage.

From the Manufacturer

The Workmate 125 holds a robust 350-pounds on its work surface. Open and close the Workmate with the dual clamp cranks which offer increased clamping force and versatility. The rubber non-skid-feet prevent the unit from sliding around as you do your projects. At only 15-pounds, you will get portability without increased fatigue. Folds flat for easy storage. The workmate 125 includes four swivel pegs for added versatility and reliability in clamping different materials.

• Durable steel frame
• Non skid feet prevent sliding
• Measures 33.3 by 5 by 5 inches; Weighs 17.8 pounds
• Work bench holds upto 350 pounds
• Included components: WM125 project center, swivel pegs

User questions & answers

Question:	Do the 'bench dogs' or the swivel peg grips come with the workmate
Answer:	Yes. It comes with 4 of them.
Question:	What is the maximum width both both jaws fully open
Answer:	The maximum width, when the jaws are fully opened is 13-1/2"; the gap between the jaws is 4-1/2" and the length of the the jaws are 24".I hope this answers your question.
Question:	I need to be able to store it when not in use. What are the dimensions when it is folded up? It needs to be able to fit in a cabinet. Thanks
Answer:	2 feet wide by 3 feet tall by 4 inches thick. I keep it under my bed. :)
Question:	what is the table hight
Answer:	30 inches when opened and ready for use, but I see other people have different heights...

Product description

Whether you're a contractor or a DIY enthusiast, the Folding Work Table by Keter provides a sturdy yet portable work space for a wide variety of projects. From home improvement projects to commercial construction work, this folding workbench helps you get the job done in any type of setting. Whether you need a sawhorse for cutting jobs or a place to rest boards for painting, a pair of one-handed clamps holds your project materials securely in place. Count on this folding work table to provide dependable work support for everything from sanding two-by-fours to staining table legs. Durable steel legs provide the support you need to feel confident while performing any task. Try it for one project and the bench will become your go-to source for reliable work support.

Thoughtful engineering, quality construction and weather-resistant materials allow the table to adapt well to any work environment. Made from rugged polypropylene resin, the work table is built to stand the test of time. Its plastic base offers the following benefits:

• Won't peel
• Resists cracking
• Never rusts
• Resistant to dents
• Won't fade in the sun
• Folded dimensions: 33.46” W x 21.65” D x 4.4” H
• Assembled dimensions: 33.46” W x 21.65” D x 29.75” H

From the Manufacturer

Keter 17182239 Folding Work Table pops up to allow for a work surface then neatly folds away when you're done. Won't take up much room when not in use. Two clamps are included to hold down whatever you're working on. The quick opening device makes assembly a snap.

• DIMENSIONS: Standing: 33.46 in. L x 21.65 in. W x 29.75 in. H / Folded: 33.46 in. L x 21.65 in. W x 4.4 in. H
• RESIN CONSTRUCTION: Made of heavy-duty resin with aluminum legs and a work space capacity of 1000 lbs.
• DURABLE AND STRONG: Weather-resistant polypropylene construction prevents rusting, peeling, and denting
• LESS THAN 30 SECOND SETUP: Unique quick opening and folding system for easy storage and portability
• LESS THAN 30 LBS: With its lightweight design and sturdy carrying handle, take your workbench just about anywhere
• EASY STORAGE: Folds down to 4.4 inches thick for easy storage in a pinch
• ACCESSORIES INCLUDED: Includes two 12 inch clamps to secure a variety of working materials
• VERSATILE USE: Perfect for any kind of project – DIY projects, home improvement, commercial construction work, painting, table saw use, and more

User questions & answers

Question:	Image shows a large saw being used on the work bench. Can saws be attached to the work bench
Answer:	The top of the bench is about 3" thick, honeycomb thermoplastic, with a variety of clamping points. I usually clamp wood to the surface, and use my power tools in my hands. But the bench will hold hundreds of pounds and is very stable (I have stood on it - 220 lbs). This workbench is considered a mobile workbench, and is no match for a heavy metal tool stand. And how do you define a large saw, 12" comercial table saw, or power miter saw? Say the saw weighs 50 pounds. If you can clamp or bolt the your saw to the top, in my opinon it will hold the weight and stress of cutting standard wood pieces. If you are trying to cut railroad ties, it is probably not the right bench.
Question:	Did anyone consider the Worx Pegasus table? Why did you choose this one
Answer:	The biggest reason for me was this Keter has hole sections so you can the clamps vertically as well as horizontally. I didn't have much use for the saw horse components of the Worx Pegasus. I actually bought the adjustable leg keter that is now available since I am over 6' and no other folding table seems to get as high (34" to top of surface)
Question:	what is the size of the top work surface
Answer:	the size is 33 1/4 " x 21 1/2 ". good work table. if anything happened to mine i would have to have another.
Question:	How much does it weigh
Answer:	It says 30 pounds and that's about right. Packed up, it feels like a heavy suitcase. To open it, the handles are at each end, about 36" span, but it's still liftable. My worry was being able to lift it well enough to control the legs while closing it up, as they have to fold correctly. Though I'm 60, I've found it's very manageable. I use it indoors. It's portable to outdoors but on a level surface, the legs don't adjust. I love this table. I can't imagine working without it.

Product features

The Keter Folding Work Table

The Keter Folding Work Table provides a sturdy portable work space for a wide variety of projects. Count on this folding work table to provide dependable work support for everything from sanding two-by-fours to staining table legs. Durable steel legs provide the support you need to feel confident while performing any task while a pair of one-handed clamps holds your project materials securely in place. Try it for one project and the bench will become your go-to source for reliable work support.

Step 1

Fold the center support section down and push in on the side supports to unlock them.

Step 2

Reach through the openings in the table top and grasp the lower section of the bench. Pull up on the lower section to begin collapsing the legs, lowering the unit to the ground.

Step 3

Once the unit is flat on the ground, press down on the table top to place the unit into its fully closed position.

Step 4

Carry the unit by the convenient carrying handle.

Product description

Meet your new favorite workhorse, the Pegasus. This multi-function work table and sawhorse with quick clamps and holding pegs can support up to 300 lbs as a table, and up to 1,000 lbs as a sawhorse! The legs lock into place and are made of tough molded ABS with steel supports, and the non-slip feet stay in place on both grass and pavement. Yet the Pegasus itself is only 25 lbs, so you can fold it up and carry it anywhere, or keep it in the back of the truck. The integrated clamping system exerts up to 300 lbs of force to keep your project firmly in place, and has a max clamping width of 18 ¼”. And the clamp dog pegs allow you to secure round and oddly shaped materials. This table is 31” x 25” and is a standard 32” high, so it can be linked up with our other Worx tables, and other Pegasuses, to make a longer, fully-functional work table. (Link locks are included.) And the folding tray at the base is designed to hold tools, power strips, or anything you need on the job. The Pegasus is tough and solid enough to be a permanent work table or sawhorse but built to be portable, so you can take it from job to job, or from the basement to the garage without a problem. And it folds down to a depth of only 5”, so it’s easy to store when you’re not going to be using it for a while.

• [WORKTABLE & SAWHORSE] Holds up to 300 lbs. as a work table, supports 1,000 lbs. as a sawhorse. And it’s easy to transition between the two
• [CUSTOM CLAMPS] Two quick clamps are integrated and stay attached even when you fold the table into a sawhorse. Because they’re designed specifically for the Pegasus, they’ll be stronger and last longer
• [LIGHT AND STURDY] It’s only 25 lbs., and its foldable design makes it easy to move and store
• [CONNECT MULTIPLE TABLES] Create a whole work counter when you link 3 or more Pegasus’ together. Whether your worksite or workshop is spacious or tight, this building solution expands or contracts to fit your needs
• [DO IT YOURSELF. DO IT BETTER. DO IT WITH WORX.] WORX tools are engineered with cutting-edge technology, and above modern efficiency standards, so you can build a cost-effective tool collection that’s been designed to last
• [STORAGE SHELF] On the bottom of the work Pegasus we’ve made a place to hold a power strip or supplies. Perfect extra shelf or storage for your workspace
• [BUILT TO LAST] Made out of a dependable, molded ABS with steel supports and fittings. This table will be with you for the long haul

User questions & answers

Question:	can i use this worx Pegasus for 12" miter saw stand
Answer:	Yes. Use the dogs and clamps to hold it in the center. You might want to put small sand bags on the legs to minimize shake creep
Question:	How wide can the clamps go? What is the widest I could clamp
Answer:	Thank you for your inquiry. The max clamping width is 18 inches.
Question:	Would you consider this table to be sturdy? And are the clamps good quality
Answer:	This a very sturdy table! I use it to put my radial arm on! The clamps are the same as on my Worx Sawhorses (which I also highly recommend). I use ONE to clamp my lawnmower blade when I use my angle grinder to sharpen it and it holds it VERY firmly! I would recommend getting the saw horses also as they are the same height and help support bigger pieces. I highly recommend both of them. Enjoy!
Question:	Is this the same Pegasus table for sell at the big box store for
Answer:	Yes, this would be the same unit that is sold in the local retail stores however, the price will vary per location.

Product features

Integrated Clamping System

Even though they’re removable, the clamps are designed for the Pegasus, and are optimized to give you the power and support you need.

Adaptability

You can build yourself an entire workbench by attaching another Pegasus or other Worx tables like the Sidekick or Clamping Sawhorse. All 3 are the same height and use the same joiners.

Foldable for Easy Transport

It’s only 30 lbs and fits right under your arm, so you can throw it in the back of the truck and take it to the job site, or from the basement to the backyard.

2 Bar Clamps and 4 Clamp Dogs

The bar clamps exert 300 lbs of force to keep almost any project firmly in place, and the clamp dogs are designed to hold circular or oddly shaped pieces. Pegasus can hold most projects as a result.

Built-In Measuring Guides

Never worry about misplacing the tape measure or a yardstick. This handy measuring guide is indispensable.

Collapsible and Lightweight

Pegasus folds easily and quickly into a form that’s made to be carried. And 30 lbs is light for a sawhorse. If you work in a lot of places, Pegasus is the table and sawhorse for you.

High Load Capacity

As a worktable, Pegasus can support up to 300 lbs, but folded down into a sawhorse, it can hold up to 1000 lbs. It may be light, but it’s engineered to be sturdy.

Product description

Black & decker's wm425 workmate 425 550-pound capacity portable workbench has an extremely durable and sturdy frame and an innovative one-handed clamp system. Its feature set and reliability make it ideal for carpenters, woodworkers, DIY enthusiasts, home mechanics, and anyone looking for home shop assistance. This unit features a one-handed clamping system which allows the clamps to be adjusted together or separately. It also comes with adjustable swivel pegs that support a wide variety of shapes by holding oddly or un-routinely-shaped work pieces and holding them securely. Also, the adjustable jaws and vertical clamping provides flexibility and stability when clamping materials. This workbench has a heavy-gauge steel frame construction that supports up to 550 pounds. It has a handy dual height adjustment, and it folds up easily for simple wall storage. It provides you with 1-9/16-inch vertical clamping, 7-1/2-inch parallel clamping, 19-inch parallel peg clamping, and 30-inch diagonal peg clamping. Includes: black & decker wm425 workmate 425 portable workbench, swivel pegs.

• Workmate transforms into a roomy workbench or bench tool stand
• Heavyweight steel design holds up to 550-pound
• One-Handed clamp system allows for independent jaw adjustment
• Measures 29.2 By 8.9 By 29.5-inch
• Includes four swivel pegs, extra block, and vise-to-workbench converter insert

User questions & answers

Question:	can you mount the X bench down draft table 3100-05 to this
Answer:	The Skil X bench downdraft table is shown at https://www.amazon.com/SKIL-3100-05-X-Bench-Downdraft-Accessory/dp/B0014TILV6/ . I don't think this would work because the vacuum hose connects through the bottom of the downdraft table and mounts into a specific hole in a Skil work table.
Question:	How easy would it be to replace the bamboo top with oak plywood or mdf
Answer:	Believe it not. Bamboo is more resilient than oak.
Question:	Is it sturdy enough to mount a vise temporarily
Answer:	I was able to mount a vise on mine with no difficulty. This shows what I did: http://bit.ly/1TDbS3u
Question:	How does the orange bar tilt the table
Answer:	Hello, the whole table does not tilt. The table top comprises 3 panels. Only the front panel tilts upward 90 degrees. This allows it to hold vertically by pressing down. The other 2 panels can be shifted and need to be shifted to allow the front panel to lift. Note that the assembly instructions are terrible. Very small print, poor verbage. No distinctions between the 3 block pairs and where they go. Also, on mine, the belt that allows the 2 handles to turn together had slipped off one handle and getting the 2 handles lined up again was a challenge. So, be prepared to do some heady figuring if you buy this and are assembling alone. Once assembled, it's a good device. Tony

Product description

The lightweight black & decker workmate wm225 portable work bench transforms into a sawhorse, a vise, and a bench tool stand capable of holding up to 450 pounds. Its strong steel design also includes an easy-to-use clutch and clamp system, as well as rubber feet. Its adjustable jaws include four swivel pegs that can be used to grip almost any object. Bench dimensions: 30-1/8-inch bench height, 23-1/8-inch sawhorse height, 0-9-1/4-inch parallel clamping, 0-9-7/8-inch diagonal clamping, 16-inch max. Parallel leg clamping, 24-inch max. Diagonal peg clamping, and a 24-inch-by-9-11/16-inch work surface. The workmate 225 portable project center makes a great addition to any workshop. This advanced system with exclusive clutch design makes clamping easy and allows for fine tuning. This project center conveniently folds for easy storage and transport, and its durable steel construction holds up to 450 lbs. Use as a workbench, bench tool stand, vise or saw horse. Includes four swivel pegs and rubber feet.

• Workbench transforms into a vise, sawhorse, and bench tool stand
• Sturdy steel design holds up to 450 pounds
• Adjustable jaws include swivel pegs for a unique gripping range
• Measures 30.2-by-6.8-by-24.1 Inches; weighs 28 pounds
• Includes four vise attachments

User questions & answers

Question:	Is the rear vise attached to the frame? If you follow the instructions on the placement of the rear vise/board - it isn't really attached - just slide
Answer:	The rear vise board is not permanently attached. It has a boss that protrudes from the bottom of the board that fits into one of three different sets of slots so that you can adjust the clamping distance.
Question:	Is this bench strong enough to hook a vise and then a small metal slab in between the vise. I am using this to stamp my golf wedges and wondering if f
Answer:	I think it is. I've clamped concrete paver blocks that measure 12" x 8" x 5" and that are heavy. Your biggest challeng may be stability, so you need to pay attention as you work and use your foot on the built in step to keep the table steady. I've abused and gone thru three of these benches over the years (I'm rough on them). For the price and features I think they're a good buy
Question:	Would this secure an AR upper receiver vise block
Answer:	The rear board of the vise is also adjustable so the jaws of the vise can open up to approximately 12".
Question:	Why don't these come with locking caster wheels
Answer:	My husband loves his workbench. For 20 years he has never needed it to be on wheels.

Product description

Don't mistake the clamping table's lightweight design for something flimsy and unable to help with the job. It's extremely durable and can hold up to 1000 pounds. The handle makes it easy to carry the table to and from the job, and the storage compartment is ideal for keeping your tools and accessories together. Professionals need a quality workstation where they can start and finish their tasks. The Jobmade Clamping Table is designed for professionals who want a portable table that can hold heavy loads. When the job is done, simply fold the table flat, put your tools in the compartment and carry it to your truck with ease. Want to know some more benefits of the Jobmade Clamping Table? Check these out: Folded dimensions: 34. 65 in L x 21. 81 in. W x 4. 41 in. H Unfolded dimensions: 38. 19 in. L x 25. 39 in. W x 31. 89 in. H Tough enough to handle 1000 lbs. of load, yet lightweight enough to take it wherever you need to go It's made from durable resin, so it'll never rust, rot, peel or fade The table folds flat and is easy to carry thanks to the durable handle It comes with four holding clamps to assist with the job The storage compartment doubles as a tool organizer It has universal metal T-track rails for 2-inch bar clamps Work with confidence on slippery or uneven surfaces with built-in leg stabilizers Resilient, lightweight and portable means you can work just about anywhere Sturdy carrying handle

• DIMENSIONS: Folded: 34. 65 in L x 21. 81 in. W x 4. 41 in. H / Standing: 38. 19 in. L x 25. 39 in. W x 31. 89 in. H
• RESIN CONSTRUCTION: Made of heavy-duty resin with aluminum legs and a work space capacity of 1000 lbs.
• DURABLE AND STRONG: Weather-resistant polypropylene construction prevents rusting, peeling, and denting
• LESS THAN 30 SECOND SETUP: Simply remove the legs from their designated storage space and pop them into the tabletop
• LESS THAN 30 LBS: With its lightweight design and sturdy carrying handle, take your workbench just about anywhere
• EASY STORAGE: Collapses down to 4.4 inches thick for easy storage in a pinch
• ACCESSORIES INCLUDED: Includes four holding clamps to secure a variety of working materials as well as a removable tool organizer that clips into the table to always have on hand

User questions & answers

Question:	Says the T tracks support 2 inch bar clamps, I’m assuming that means throat depth? Can you link or list some exact compatible clamps
Answer:	Bessy 4 in. x 2 in. Bar Clamp
Question:	Is this product identical to the now-discontinued husky portable jobsite workbench from home depot? i have accessories i've already made to fit
Answer:	No. It is an awesome table. I use to to build everything from guns to polishing parts to vise work. It's a great buy
Question:	Is it 32" or 36" to the top of the table
Answer:	36" tall, 32" wide
Question:	Anyone know what the 4 thin plastic pieces are for
Answer:	They slot into the tool box to create compartments.

Product features

The Jobmade Clamping Work Table by Keter

Got a project to start but don't have the right table to help finish the job? The Jobmade Clamping Table by Keter is the ultimate solution for your professional and DIY needs. It's portable, so you can carry it easily wherever you go. Want to know the best part? It has a built-in storage compartment to keep all your tools on hand when you need them and neatly organized in one place.

Built-In Leg Stabilizers

Whether you're working in a professional environment or taking on a DIY project at home, the leg stabilizers will keep the table level no matter the location.

Discreet Storage Compartment

It has a built-in storage compartment to keep all your tools on hand when you need them and neatly organized in one place.

Sturdy Carrying Handle

The handle makes it easy to carry the table to and from the job at your leisure.

Foldable for Portability

Simply fold in the sturdy legs to easily store and maneuver with ease.

Product description

The BORA centipede support stand is a sturdy, portable workbench and saw table base. Made of heavy-duty steel, It sets up in seconds. When you’re ready to leave the job site, It folds down into a compact, lightweight carry bag for easy transport and space-saving storage system. Featuring a unique metal frame design, each support is constructed of multiple steel Struts that rest directly between the load and ground. This structure offers rigid stability while keeping even the thinnest sheet materials from sagging. Various accessories can be used with the equipment Stand, from Sawhorse to planning tables. BORA tools designs to maximize your utility, comfort, and convenience.

• Saw-horse solution - Made of heavy duty steel construction, The centipede is a fold-able work stand that can be set up as a large portable workbench at any job site
• Complete kit- The full set comes with the following accessories: 2 quick Clamps to keep your materials firmly in place, 4 X-shaped brackets which hold standard 2x4 boards steady, and a sturdy carry bag
• Perfect working height - The working height is 30 inches tall: Large enough to lay a 4ft x 8ft wood board on top. It’s expandable by simply adding risers (not included) to increase the working height and it supports up to 2, 500 pounds of power tools and machinery
• Versatile Functionality - Choose from 4 sizes, CK6S, CK9S, CK12S and CK15S. The larger the base, the more weight the table can hold. The wider sizes allow you to complete 2 jobs at once
• Quick set up – This stand is ready to use right out of the box, no Assembly required. It takes just seconds to set up. When the job is done, it conveniently folds up for easy storage and transport
• CK22T Table Top - Now available for a portable work top option with 3/4-inch bench dog holes
• Depending on the size of your Centipede workstand, you may need more than one Tabletop for full coverage. CK6S needs 1, CK9S needs 2, CK15S needs 4.

User questions & answers

Question:	Can I buy extra clamps
Answer:	Hello. Yes, the item # is CA0302 (Bora Centipede 2-pc Quick Clamp Set). If you have any additional questions you can email: [email protected].
Question:	Can you increase a height to be higher then 30 inches
Answer:	no unless you build a jig to increase height
Question:	Has anyone found a safe way to raise the bora centipede at even level with their table saw top
Answer:	Define “safe way”? I used some 4x4 to raise it up for back comfort on one project but never to level it for use with a table saw.
Question:	Can you cut s 4x8 piece of plywood on this
Answer:	Yes. But if the ground is not even then the load will shift.

Product features

2' x 4' Work Support Table

The Bora Centipede CK6S Workstand is the most flexible solution for your job site, work space, or workshop. It turns into a 2ft x 4ft workstation in seconds-no assembly required.

Flexible yet tough, the Centipede allows you to create a custom work space to fit your needs, wherever that may be. Use it at the beach for a dining table, a place to set gardening tools in the yard, or on your job site to look at plans while someone else saws. The options are endless!

Flexibility

Today’s workspace needs to be flexible. Centipede allows you to change locations and setups to suit the task at hand. Whether you are on the job or in the workshop, you will have the support needed to get the job done while doing your best work.

Table Top Option Now Available

The CK22T table top securely fastens to the P-Top's on your work stand with the 6x (included with purchase) quick twist locks for a portable work top option. Table top has 3/4-inch dog holes and the dimensions are 24" x 48" (610 mm x 1200 mm) – same size as the CK6S. It is hinged in the middle for easy clean up and transport.

Tackle Any Size Job

Centipede is built for the big jobs with it's innovative design and functional accessories. Instant setup and rugged construction allows you to grind, saw, cut and more.

Unbeatable Weight Capacity

Jaw dropping weight capacity means you can rely on your Centipede during crunch time. Each model delivers thousands of pounds of capacity without sacrificing portability or ease of setup.

CK6S

The 6 Strut portable work stand is an easy solution for jobs where you have limited space, need quick set up and take down, and a work station that moves around the work site with you.

2) Quick Clamps

Quick Clamps keep your materials securely held in place when when inserted into the P-Top on your Bora Centipede work stand. Quick clamps fit in standard 3/4 in, bench dog holes.

4) 2x4 Support Brackets

Get quick cuts without clamping when using the X-shaped 2x4 support brackets, four pieces included with your purchase. Designed to fit standard 2x4 boards on the edge or face, these X-shaped cups will allow you to spend less time setting up and more time working.

Carry Bag

Made of rugged canvas with a sturdy, yet comfortable strap, this bag will fit your CK6S and accessories. Keep your equipment safe and dry during transport or when in in storage.

Product description

Introducing the Portable Bench Tool Stand with Bamboo Table Top by POWERTEC. This workbench table top was designed to provide you with a versatile and portable woodworking table to accommodate an assortment of common applications. Whether your project requires clamping, cutting, painting (and more), you’ll find this multi-functional table to be a must-have. Premium BuildUnlike most of its competitors with similar specs, this table is easy to assemble and doesn’t deliver a flimsy construction. It features a rugged, heavy-duty steel frame and bamboo work top, that paired together form a lightweight, yet compact work center that’s built to last and get the job done. Weighing only 11 pounds, this sturdy workbench table was professionally designed, able to hold a total capacity of 220 lbs of workload. Standout PortabilityOne of the most impressive features of this table, is it’s ergonomic and portable design. Whether you’re at home or traveling to a work-site, this unit is easily transported and conveniently folds up for optimal storage. Additional Features: Large Working Surface Adjustable Vise Action Plastic Non-Marring Feet Built-in Tool Storage Compartment Imprinted Metric and Protractor Scale

• INCLUDES: Portable Bench Tool Stand with Bamboo Table Top, and Bench Dogs
• FUNCTION: This multi-functional workbench tabletop accommodates a wide variety of woodworking projects, including clamping, cutting, painting and can used as a vise tool or sawhorse
• PREMIUM FEATURES: A portable design with fully adjustable vise panels for project versatility, a built in storage rack for your tools, plus an imprinted metric and protractor scale for optimum accuracy
• BUILD: Flaunting a heavy duty steel frame and premium bamboo work top, this foldable work stand weighs an impressively lightweight 11 pound construction
• WEIGHT CAPACITY: Able to hold up to 220 lbs

User questions & answers

Question:	How well would this stand up to a 3d printer vibrations
Answer:	It's very sturdy and steady
Question:	what is the diameter of the bench dog holes
Answer:	Same as the orange and black stops that come with the Blach & Decker work mate product for years. Can buy them separately at big box.
Question:	How tall when not folded and ready to use
Answer:	It's about 35" when folded for storage, 32" when being used. (I could get definite numbers, but I've got a project dryng right now 😉). I really enjoy this as it's easy to use and not super heavy
Question:	How tall is this
Answer:	About 32"

Product features

The Portable Bench Tool Stand with Bamboo Table Top by POWERTEC

This workbench table top was designed to provide you with a versatile and portable woodworking table to accommodate an assortment of common applications. Whether your project requires clamping, cutting, painting (and more), you’ll find this multi-functional table to be a must-have.

Premium Build

Unlike most of its competitors with similar specs, this table is easy to assemble and doesn’t deliver a flimsy construction. It features a rugged, heavy-duty steel frame and bamboo work top, that paired together form a lightweight, yet compact work center that’s built to last and get the job done.

This sturdy workbench table was professionally designed, able to hold a total capacity of 220 lbs of workload.

Multi-Functional Workbench Tabletop, Comes with 4 Bench Dogs

This multi-functional workbench tabletop accommodates a wide variety of woodworking projects, including clamping, cutting, painting and can used as a vise tool or sawhorse. A portable design with fully adjustable vise panels for project versatility, plus an imprinted metric and protractor scale for optimum accuracy.

The included 4 bench dogs can be assembled into any of the holes on the table top, and be easily moved when needed to aid in clamping the workpiece.

Standout Portability

One of the most impressive features of this table, is it’s ergonomic and portable design, with a built in storage rack for your tools.

Whether you’re at home or traveling to a work-site, this unit is easily transported and conveniently folds up for optimal storage.

Product description

Everyone needs the support of a Sidekick. It can handle up to 300 lbs, so it holds its own as a worktable in the shop or on projects. Yet it folds together easy and only weighs 13 lbs so you can take it anywhere and use it for everything. It’s great for tailgating, outdoor parties, pretty much anywhere you need a portable table. It’s 36” x 13.5” x 6” when folded for transport and 24” x 24” in table mode. It’s a standard 32” high—that’s the same height as our other Worx support products, so you can link it to the Pegasus (2 Link Locks are included) or use it on projects with our Clamping Sawhorses to extend its usefulness. It features 4 Clamp Dogs, which keep materials in place. It’s marked with many common measuring guides. And there are handy accessory trays built right in. The steel metal legs are designed not to slip on hard surfaces or sink into soft ground. And when you’re ready to go, they quickly collapse, and the table folds right around them like a briefcase, so you can take it to the next job or event. And that portability also makes it easy to store. The Sidekick is a perfectly portable table that you can take anywhere and use to support the load once you get there. Whether you’re a painter or party-planner, DIY-er or handyman, you can always use a Sidekick.

• [LIGHTWEIGHT & STURDY] This flexible and transportable table is tough enough to be a permanent fixture in your workshop, yet light enough to take from job to job. And it folds in half for easy storage and transport
• [LEGS STAY SECURE] Metal legs won’t slide out on pavement or sink into soft ground. You’ll have a solid base to work on a project, or even to tailgate
• [EASY STORAGE] It collapses in a second, so you can throw it in a corner and get it out of the way until the next time you need it
• [HOLDS 300 LBS] Don’t let all this ease and portability fool you. You can plop a heavy project or two onto the Sidekick and it’ll bear the weight
• [DO IT YOURSELF. DO IT BETTER. DO IT WITH WORX.] WORX tools are engineered with cutting-edge technology, and above modern efficiency standards, so you can build a cost-effective tool collection that’s been designed to last
• [ABS & STEEL] Constructed of rugged, molded ABS with steel legs and fittings. It might only be 13 lbs., but it’s made of tough stuff
• [COMES WITH CLAMPS] The Sidekick comes with 2 link locks so you can connect more Sidekicks into a long work counter, and 4 clamp dogs to keep your projects in place
• [COMPATIBLE WITH OTHER WORX TABLES] It’s the same 32” height as the WORX Pegasus work table and the Worx Clamping Sawhorses, so you can link the Sidekick with them and have a multi-functional work counter

User questions & answers

Question:	Can risers be added to the legs to increase tabletop height by say 6" like the Bora Centipede allows
Answer:	Have not added any risers although as it sits is very sturdy. I use it as a portable work bench for radio and transmitter repair.
Question:	Anyone know part sizes for adjustable feet in product review video? Video was great but looking for parts used in video
Answer:	Greetings from WORX! That is a great question! Unfortunately the adjustable feet will not be available. If you have any further questions or concerns we recommend contacting the WORX Solutions Center at 1-866-354-9679 Monday through Friday 9 am through 6 pm EST.
Question:	What is the unfolded height of this table? The dimensions are only for the table folded
Answer:	32”Height X 24”x24” (surface)
Question:	Unfolded work space dimensions (area
Answer:	The table top is 24"X 24".

Product features

Stable Metal Legs

The non-slip legs are made to provide a steady workspace on a variety of surfaces. And they collapse to fit into the Sidekick when you’re carrying it around.

Compact & Lightweight Design

Supports projects up to 300 lbs, but only weighs 13 lbs itself. Plus, it folds up and is easy to tuck under your arm and carry with you.

Quick Set Up

Whether you’re taking it to the job site or the tailgate, setting it up in the living room or the garage, the Sidekick sets up in seconds.

Clamp Dogs

4 mini clamps work with or without the table and safely secure projects of multiple proportions in a variety of positions.

Link ‘em Together

The Sidekick is 32” high, the same height at the Worx Pegasus Work Table, and our Clamping Sawhorse, so you can connect multiple tables together using the included Link Locks and make a heavy-duty table. Yet, that table will still be easy to take down and store when you’re done with it.

Portable Support

At only 13 lbs, you might think this table doesn’t stack up, but it can hold 300 lbs of projects, tools, or whatever. Yet the surface folds up in a snap, and the legs collapse and store inside so you can carry it anywhere and set up shop wherever you like.

Product description

The OmniTable is a workbench, Scaffold, Dolly and floor creeper all in 1. With it's large work surface of 37. 5" x 18. 3" and 500 pound load capacity, OmniTable can accommodate large projects with ease. Built-in features: power strip, ruler/protractor, drill hole, steel hammer surface, in line accessory storage, carry handle. OmniTable is lightweight at only 32 pounds is compact and easily stored.

• Workbench, scaffold, dolly, creeper - 1 product, 4 tools, unlimited project potential, 4 Disston Drill Bits included
• Practical for professional contractors as well as home users
• 500 lb. Duty rated capacity can accommodate large projects
• Compact, portable and easily stored. Sturdy, durable work surface
• Light weight at only 32lbs
• 110v power strip included

User questions & answers

Question:	How tall is it with the legs extended fully and when half extended too
Answer:	Sorry I sold it yesterday
Question:	How tall is it
Answer:	It is 30 3/4 inches tall
Question:	Can you use clamps on the table
Answer:	yes,, along the edges,, sometimes,, its not ideal but it works ok
Question:	Can you mount a vice to this
Answer:	It doesn’t look like a vice can be mounted because the top flips over, also there are wheels underneath. It is a great table especially it’s portable.

Product description

The Black & Decker WM1000 Workmate Workbench 550lb Capacity Work Bench is an ultimate accessory for all serious DIYers. This workbench is made of a heavy gauge, robust steel frame for a high load capacity up to 550 pounds. The large work surface enables a 670 x 450mm solid bamboo plate for an all purpose working platform at a convenient comfortable work height. It has a quick-clamping mechanism which allows for fast set up, with flexible clamping options enabled by a one-hand clamping system. This workbench also features a safety mechanism that provides a secured solid frame and reliable structure. This free standing units has a quick release handle that allows for one hand quick folding for convenient storage and easy transporting. Included Components: Workmate 1000 Portable Work Center and Vise, 4 swivel pegs

• Quick clamping with flexible clamping options
• Stanley - Black & Decker
• High Quality New!!!!!!!
• Heavy gauge steel frame for up to 550 lbs. workload
• Easy carry and Free standing. No Vertical Clamping
• Quick clamping with flexible clamping options
• One Hand quick folding - easy and compact

User questions & answers

Question:	Can you hammer on this table
Answer:	Yes, the capacity is 550 lbs so it is sturdy enough to hammer on as well as being used for Clamping, Painting, Cutting, Workbench, and Sawhorse.
Question:	What is the height in inches as buying for a tall man
Answer:	The top of the work surface 31.75", a comfortable work height for most men. The legs are not adjustable so this height is fixed.
Question:	The orange pegs for the clamping devices do not fit into the holes, why is that? And what can i do
Answer:	I had a similar problem. The pegs fit some of the holes but not all. So I have a hole problem. I plan to use a sanding drum slightly smaller than the hole to enlarge the small holes. This shows poor quality control on Black and Decker's part.
Question:	Are the top side dimentions (surface area) larger or smaller than the B&D WM
Answer:	it is larger ,but not buy much , only 2 or 3 inches, but the frame is much stronger, although the quick close center winder is USELESS, belt comes off all the time , hope tht helps

Product description

The Bora centipede support stand is a sturdy, portable workbench and saw table base. Made of heavy-duty steel, It sets up in seconds. When you’re ready to leave the job site, It folds down into a compact, lightweight carry bag for easy transport and space-saving storage system. Featuring a unique metal frame design, each support is constructed of multiple steel Struts that rest directly between the load and ground. This structure offers rigid stability while keeping even the thinnest sheet materials from sagging. Various accessories can be used with the equipment Stand, from Sawhorse to planning tables. Bora tools designs to maximize your utility, comfort, and convenience.

• SAW-HORSE SOLUTION - made of heavy duty steel construction, The centipede is a foldable work stand that can be set up as a large portable workbench at any job site
• COMEPLETE KIT - The full set comes with the following accessories: 4 quick Clamps to keep your materials firmly in place, 4 X-shaped brackets which hold standard 2x4 boards steady, and a sturdy carry bag
• WORK HEIGHT - the working height is 30 inches tall: Large enough to lay a 4ft x 8ft wood board on top. It’s expandable by simply adding risers (not included) for an increased working height. It supports up to 6, 000 pounds of power tools and machinery
• VERSATILE FUNCTIONALITY - Choose from 4 sizes, CK6S, CK9S, CK12S and CK15S. The larger the base, the more weight the table can hold. The wider sizes allow you to complete 2 jobs at once
• INSTANT SET UP – this stand is ready to use right out of the box, no Assembly required. It takes just seconds to set up. When the job is done, it conveniently folds up for easy storage and transport
• CK22T Table Top - Now available for a portable work top option with 3/4-inch bench dog holes
• Depending on the size of your Centipede workstand, you may need more than one Tabletop for full coverage. CK6S needs 1, CK9S needs 2, CK15S needs 4.

User questions & answers

Question:	Could this be used as a stage riser? With a drummer and drum set on it
Answer:	The specs on Amazon states that it can handle up to 6,000 pounds of machinery and tools. You be the judge, what is the weight of the drum set and whomever will play them? Will there be others on that stage? In my opinion, if what you put on it is stationary and one person sits on the drum set, nit and that's it, it could work okay. If you are going to have more than one person on it bouncing around like some musicians do, I'd be concerned....there is a big difference between stationary objects on it and bouncing around. My big centipede expands slightly beyond 4'x8' and two edges along the perimeter can be unsupported. If you do use this as a riser, I recommend that you ensure that the entire perimeter of whatever you place on the centipede is supported and the centipede does not expand beyond 4'x8'.
Question:	Can the 4x8 be expanded to just 4x4 or other sizes smaller than 4x
Answer:	No it can't. The 4x8 must be fully expanded as designed. Only when fully expanded can the Centipede support very heavy workloads.
Question:	Has anyone used this with their track saw
Answer:	I did. And I should of adjusted the saw blade depth cause I nicked the plastic holders but you live and you learn. Worked very good by the way. That's the reason I bought it
Question:	What are the dimensions of the unit when collapsed
Answer:	9 x 15 x 38 inches

Product features

4' x 8' Work Support Table

The Bora Centipede CK15S Workstand is the most flexible solution for your job site, work space, or workshop. It turns into a 4ft x 8ft workstation in seconds-no assembly required.

Flexible yet tough, the Centipede allows you to create a custom work space to fit your needs, wherever that may be. Use it at the beach for a dining table, a place to set gardening tools in the yard, or on your job site to look at plans while someone else saws. The options are endless!

Flexibility

Today’s workspace needs to be flexible. Centipede allows you to change locations and setups to suit the task at hand. Whether you are on the job or in the workshop, you will have the support needed to get the job done while doing your best work.

Table Top Option Now Available

The CK22T table top securely fastens to the P-Top's on your work stand with the 6x quick twist locks (included with purchase) for a portable work top option. Table top has 3/4-inch dog holes and the dimensions are 24" x 48" (610 mm x 1200 mm) – same size as the CK6S. It is hinged in the middle for easy clean up and transport.

Tackle Any Size Job

Centipede is built for the big jobs with it's innovative design and functional accessories. Instant setup and rugged construction allows you to grind, saw, cut and more.

Unbeatable Weight Capacity

Jaw dropping weight capacity means you can rely on your Centipede during crunch time. Each model delivers thousands of pounds of capacity without sacrificing portability or ease of setup.

CK15S Work Stand

The 15 Strut portable work stand is an easy solution for jobs where you have limited space, need quick set up and take down, and a work station that moves around the work site with you.

4) 2x4 Support Brackets

Get quick cuts without clamping when using the X-shaped 2x4 support brackets, four pieces included with your purchase. Designed to fit standard 2x4 boards on the edge or face, these X-shaped cups will allow you to spend less time setting up and more time working.

4) Quick Clamps

Quick Clamps keep your materials securely held in place when when inserted into the P-Top on your Bora Centipede work stand. Quick clamps fit in standard 3/4 in, bench dog holes.

Carry Bag

Made of rugged canvas with a sturdy yet comfortable strap, this bag will fit your CK15S and accessories. Keep your equipment safe and dry when you need to transport or store it for later.

Product description

A must-have for pros and DIYers alike, the DISSTON COMPANY 4-in-1 portable workbench easily transitions to a workbench, scaffold, Dolly, or creeper! Manufactured with functionality and durability in mind, the unit features a large 37.5" X 18.3" Work surface and 500-Pound duty rated capacity, enabling it to accommodate large projects. Additional features include a power strip, roller/protractor, tool storage, drill hole, sill hammer surface, inline accessory storage, and carry handle.

• Easily transitions from workbench, scaffold, dolly, or creeper
• Large work surface measures 37.5" X 18.3"
• Durable 500-pound duty rated capacity
• Equipped with handle for easy transportation

User questions & answers

Question:	Hello, I see two listing here in Amazon for this work bench (each have different prices)... what's the difference
Answer:	I have the Disston 30140 OmniTable 4 in 1 Portable Work Bench. It is everything advertised but I don't like it. The main thing I don't like is the legs are angled for stability as they should be. The leg angle trips me as I work around the bench. As an elevated platform to work from: It is not too bad. At maximum height old people will need a ladder to get on top of the bench. Check out option from Harbor Freight or a paint store.
Question:	where is the disston 30140 omnitable manufactured
Answer:	According to the True Value web site this is made in China (to Disston spec)
Question:	Can I clamp stuff on this? Not sure what the bottom looks like... Thanks
Answer:	the orange top is reversible and sits on a metal framework; the sides of that framework are at about a 15 degree slope. I cut a couple of 2X4 scraps into 2X2's with a 15 degree edge so that clamps snug up to the sides and top. of course you could remove the orange top and clamp directly to the metal framework but I prefer the stability of the top which is fairly strong (it will support 500# when used as a scaffold).
Question:	are the legs ajustable to difernt heights. or just two heights? lowest postion and highest postion mesurments
Answer:	The legs actually have three positions - all the way down (table height 31"), a bit less than half way down (table height 19-1/4") and fully retracted. When fully retracted wheels are exposed so the table can be used as a wheeled platform to move objects. ``

Product features

Multi-Purpose Portable Workbench

Measure, cut, drill, hammer.

Scaffold

Non-slip Surface.

Dolly/Creeper

Move bulky items with ease and achieve under-vehicle access.

Workbench

Durable cutting surface with built-in protractor, Steel hammer surface, 110V powerstrip, Accessory storage tray, drill hole guide, cutting groove, reversible top panel.

Scaffold

500 pound capacity, Non-slip surface, Easy-carry handle.

Dolly

Move bulky items with ease, Rope connector.

Creeper

Gain easy, movable access to low work areas.