4 best performance tool bench vices

Product description

Wilmar Corporation was founded in 1971. Based in Renton Washington, Wilmar supplies major retailers as well as distributors throughout North America. By providing quality tools, great service, and innovative packaging and product support, Wilmar has become one of the leading distributors of professional tools in North America. Trading under the brand names of AirTIGHTTM, Performance ToolTM, Performance TechTM, MechanicsTM, Project ProTM and Northwest TrailTM, Wilmar focuses on providing a superior level of service and quality products that meet our customers expectations of product that carries our - of Satisfaction.

• FOLDING DESIGN: Offers compact storage and easy mobility to take from work site to work site
• PRINTED TABLETOP: Printed with grid, ruler, and protractor for added convenience as you work
• ONE-HANDED CLAMP SYSTEM: Allows for independent jaw adjustment
• VERSATILE CLAMP: Jaws resist warping and can be angled to accommodate uniquely shaped materials
• 200 lb safe working load
• Folding design for compact storage
• Tabletop printed with grid, ruler and protractor for added convenience

User questions & answers

Question:	how much does this weigh
Answer:	Not much. I can't remember it's exact weight (threw out the box), but anyone with any reasonable amount of strength can fold it flat and carry it away. It is not a heavy duty piece of workshop furniture at all. It's hey flimsy.
Question:	I would like to know how far apart the two top boards will go. Does anyone have that measurement for me
Answer:	the span between the two black boards in the picture is 4-3/8". But with the spacers that fit into pegholes on top of the boards (shown in yellow), the maximum span is just under 10".
Question:	How do you open it
Answer:	I assume you mean how do I set one up? The answer is the legs are tucked in underneath the top of the horse. They fold and pivot, fitting nicely underneath. Easy to store, transport and use. They are relatively heavy, so very stable (why I chose these over others). To setup, turn the horse over, unfold the legs until they are secured behind their stop.
Question:	I would like to work on my AR-15 and I need a vise. Can I mount a vise on it
Answer:	Depends on the size of the vise. The table top is made of two jaws that open and close. If your vise is large, it will extend over the second jaw and opening and closing will be hard or impossible. I have a smaller vise mounted on mine and it works very well. The table top jaws work well as a soft vise too.

Product features

Performance Tool Portable Multipurpose Workbench and Vise

• Folding design for compact storage.
• Includes 4 bench dogs for odd shaped pieces.
• Tabletop printed with grid, ruler and protractor for added convenience.
• Includes tool storage rail.
• 200 lb. safe working load.
• Overall size: 23 7/8" x 25" x 31"

Product description

Etched jaws to prevent slipping. Pivot handle for easy turning. Slot design mounting holes. Durable build construction.

• 2-1/2" Jaw Width
• Etched jaws to prevent slipping
• pivot handle for easy turning
• slot design mounting holes

User questions & answers

Question:	Will this vise fit a porter cable floor drill press
Answer:	It is noisy, I actually wear ear plugs when using it. The ear plugs cut the noise out for the most part. But I have to turn the volume way up on the TV to hear it with the ear plugs in. I do not think it is any nosier than any other machines I have used. I use to use one at the gym and it was nosier than this one. I do really like the machine and for the price it is well worth it. I have done a little over 15,000 floors on it since owning it and have not had any major issues with it.
Question:	Is this vise steel jawed so I can add the soft pads to them. I guess the magnetic pads won't work if they aren't steel
Answer:	Approximately 34".
Question:	What is the country of origin
Answer:	From placing the order to receiving the unit is typically 2-3 weeks. Hope that answers your question!
Question:	Distance between mounting slots
Answer:	My husband is 6 ft and we have 8ft ceilings in our basement. It works for him but is close. Also can make a slight difference on whether lean forward or back.

Product description

This torque wrench is a tool perfect for adjusting nuts and bolts. Offering additional leverage for tightening difficult and hard-to-reach parts, this quality hand tool is a go-to piece for auto mechanics, electronics specialists, and machinery repair professionals. Ideal for all sorts of auto repair or home improvement projects, this handy two-way wrench is professional grade with a 3/4-inch drive reversible clicker so you can turn in two any direction.

• MEASURES TORQUE: Determines from 100 to 600 ft.-lbs. in 1-pound increments so you can ensure your nuts and bolts are perfectly tight.
• METRIC AND IMPERIAL: Torque wrench body engraved with foot-pound and newton-meters so it can be used with machinery all over the world
• ACCURACY: 4 percent +- meets standards for torque wrenches
• CASE INCLUDED: Heavy-duty ABS storage and carrying case for transport convenience

User questions & answers

Question:	Does this come with a certificate of calibration
Answer:	Maybe? But that’s not what it’s designed for. More for homebrewers making beer. It crushes the grain leaving husk material behind.
Question:	is M204 really covered by "lifetime" warranty? mfg site seems to indicate 90 day warranty but says tool must be "regularly" calibrated
Answer:	The Barley Crusher has two rollers.
Question:	what is 3x50x6 is 3 in width
Answer:	Yes.But can't crush into flour
Question:	does it come with a calibration cert
Answer:	Thank you for your question. can't use this crusher to crack corn.

Product description

BLACK and DECKER 'WorkMate Original Jaws' resist warping and swelling. Quality steel tube construction for durability. Includes swivel pegs and integral retention grooves in jaws for versatility and holding reliability in clamping different materials. Opens and closes eas ily for simple set up and clean up. Specifications: Bench Height - 29-3/4; Parallel Clamping - 4-5/8; Diagonal Clamping - 24; Parallel Peg Clamping - 10-3/4; Diagonal Peg Clamping - 22-3/8; Work Surface - 9x 24; Weight Capacity-350 lbs. Amazon.com Black & Decker WM125 Workmate 125 350 Pound Capacity Portable Work Bench is a necessity for the serious craftsman. Weighing only 15 pounds, this heavy-duty workbench holds up to 350 pounds to accommodate a wide variety of projects. Dual clamp cranks and four swivel pegs can be angled for unique jobs when clamping a variety of materials. Jaws resist swelling and warping over time. Non-skid feet prevent sliding while you work. The bench folds flat for compact storage.

Black & Decker WM125 Workmate 125 350 Pound Capacity Portable Work Bench is a necessity for the serious craftsman. Weighing only 15 pounds, this heavy-duty workbench holds up to 350 pounds to accommodate a wide variety of projects. Dual clamp cranks and four swivel pegs can be angled for unique jobs when clamping a variety of materials. Jaws resist swelling and warping over time. Non-skid feet prevent sliding while you work. The bench folds flat for compact storage.

From the Manufacturer

The Workmate 125 holds a robust 350-pounds on its work surface. Open and close the Workmate with the dual clamp cranks which offer increased clamping force and versatility. The rubber non-skid-feet prevent the unit from sliding around as you do your projects. At only 15-pounds, you will get portability without increased fatigue. Folds flat for easy storage. The workmate 125 includes four swivel pegs for added versatility and reliability in clamping different materials.

• Durable steel frame
• Non skid feet prevent sliding
• Measures 33.3 by 5 by 5 inches; Weighs 17.8 pounds
• Work bench holds upto 350 pounds
• Included components: WM125 project center, swivel pegs

User questions & answers

Question:	Do the 'bench dogs' or the swivel peg grips come with the workmate
Answer:	Yes. It comes with 4 of them.
Question:	What is the maximum width both both jaws fully open
Answer:	The maximum width, when the jaws are fully opened is 13-1/2"; the gap between the jaws is 4-1/2" and the length of the the jaws are 24".I hope this answers your question.
Question:	I need to be able to store it when not in use. What are the dimensions when it is folded up? It needs to be able to fit in a cabinet. Thanks
Answer:	2 feet wide by 3 feet tall by 4 inches thick. I keep it under my bed. :)
Question:	what is the table hight
Answer:	30 inches when opened and ready for use, but I see other people have different heights...