12 best ladder stabilisers

Ladder stabilizers are essential accessories used with extension ladders and some other types of ladders to enhance safety and stability during various tasks, particularly when working at heights or on uneven surfaces. Here's what you need to know about ladder stabilizers:

  1. Purpose: Ladder stabilizers are designed to provide a wider and more secure base for ladders. They help prevent the ladder from wobbling, swaying, or tipping over, which can reduce the risk of accidents and injuries while working at heights.

  2. Design: Ladder stabilizers typically consist of two horizontal arms or brackets that extend outward from the sides of the ladder when attached. These arms create a broader contact area with the ground or the supporting surface, increasing stability.

  3. Attachment: Stabilizers are usually attached to the top rungs of the ladder or, in the case of extension ladders, to the upper section of the ladder. They are secured using clamps or other attachment mechanisms. The arms extend horizontally to provide support.

  4. Compatibility: Ladder stabilizers are designed to be compatible with various ladder types, including extension ladders, combination ladders, and some step ladders.They come in different sizes to fit different ladder widths and designs.

  5. Materials: Stabilizers are typically constructed from durable materials like steel or aluminum, ensuring their strength and longevity. Some may also have rubber or non-slip grips on the bottom of the arms to improve traction and stability.

  6. Adjustability: Many ladder stabilizers are adjustable, allowing users to extend or retract the arms to fit the specific task or working conditions. This adaptability makes them versatile for a wide range of applications.

  7. Safety: Ladder stabilizers significantly enhance safety by reducing the risk of ladder accidents. They provide a stable platform for users to work from, minimizing the chances of ladder movement, slippage, or tipping.

  8. Versatility: Stabilizers are commonly used by professionals in various industries, including construction, painting, roofing, and maintenance. They are particularly valuable when working on projects that require extended periods on a ladder or when using heavy tools and equipment.

  9. Storage and Transport: Some ladder stabilizers can be easily folded or detached for convenient storage and transport. This feature is especially beneficial for contractors and DIY enthusiasts who need to move their equipment frequently.

  10. Cost: The cost of ladder stabilizers can vary depending on their size, design, and features. They are generally affordable and represent a worthwhile investment for anyone regularly using ladders for their work or home projects.

In summary, ladder stabilizers are crucial safety accessories for individuals working at heights or on uneven surfaces using ladders. They provide added stability, reduce the risk of accidents, and contribute to a safer and more secure work environment. Whether you're a professional tradesperson or a DIY enthusiast, using a ladder stabilizer is an important step in ensuring your safety while working at elevated heights.

Below you can find our editor's choice of the best ladder stabilisers on the market
  

Louisville Ladder LP-2200-00 Stabilizer

Louisville Ladder

Based on 2 reviews Check latest price

Product description

Louisville Ladder stabilizer Fits extension and single ladders with rail up to 4'' by 1 3/4'' Designed for added stability

From the Manufacturer

Fits extension and single ladders with rail up to 4” x 1 3/4”. Holds 12 inches from wall and spans 48 inches to clear most windows. Stabilizers attach with 2 U-bolts and feature replaceable extra heavy duty rubber tips.

  • SUPERIOR BUILD This Louisville stabilizer is made of superior quality with an elegant design and smooth finish In addition the stabilizer attach has 2 U-bolts which feature replaceable extra heavy duty rubber tips
  • FITS ALL Clears most windows

User questions & answers

Question: What is the stand off with it attached to the ladder
Answer: You should be able to slide a passport right into either of the zipper pockets...It seems large enough.
Question: Need to clean gutters and have vinyl. Appears, even though I have unit, I now find out it won't stand off against roof
Answer: Yes, but it's still a little difficult to get out as it's a very snug ID pocket. But, after a little use it gets easier.
Question: Will this fit an old Keller 24' aluminum with D rungs
Answer: Made in India. Hope this will help. Thanks.
Question: Can this stabilizer rest on the roof, or does it have to rest against the wall
Answer: I don’t know the exact weight measurement but it is light - the leather is not heavy

Product features

Extra safety

Add another layer of safety to your ladder with this durable ladder stabilizer.

The ladder stabilizer fits extension ladders with rails up to 4'' by 1 3/4''

Werner AC78 Quickclick Stabilizer

Werner

Based on 1 reviews Check latest price

Product description

dimensions: 3" x 44" x 10"

weight: 6.5 lbs.

Ladder stabilizer

Installs and removes in seconds

Ideal for painting and home repair projects

Spring-loaded locking latch

Quick release attach pins connect stabilizer arms to body

Non-marring rubber end caps

For use with all Werner aluminum and fiberglass extension ladders

No tools required for assembly

Made in USA

10" standoff form work surface

Not for use on Type III (200 lbs) aluminum, Type II (225 lbs) fiberglass extension ladders or MT series ladders.

For use on ladders up to 40 ft

Do not use in conjunction with ladder jacks using planks or stages.

AC78 QuickClick™ Stabilizer spans 44" and provides a standoff of 10". Requires no tools to attach to ladder. Spring-loaded locking latch makes it easier and quicker to install/remove than any other stabilizer on the market. Mar-resistant rubber end caps protect the work surface. Paint can hook is included.

From the Manufacturer

Werner, the most trusted name in ladders, is preferred by pros more than any other brand. For over 60 years, pros have looked to Werner to supply their climbing equipment needs. Werner manufactures a full line of safe, professional-grade products for any job, and it builds its ladders to withstand even the most challenging tasks that's why Werner ladders are found on more jobsites than any other brand.

  • Commercial Brand: Werner
  • Import from: China
  • Material handling
  • Country of Origin: CHINA

User questions & answers

Question: Is this compatible with werner® 20ft type ii aluminum extension ladder (d
Answer: Yes
Question: Will this work on a telescoping ladder (for example, xtend and climb ladder
Answer: nope.. if it were it might come down when you pull the door down... as said it attached to the floor of the attic which also saves space...you are given a bar with a plastic hook to pull it down.. works really well..
Question: will this fit a little giant ladder
Answer: I can only say that without modification, the spring mechanism will not allow vertical retraction. Mines served me well although a bit flimsy, is equally as light, compact and functional. I'm 185, I couldn't recommend it for anyone over 220.
Question: will this stablizer work on a Werner articulating ladder
Answer: Yes, it should work provided that the other clearance requirements are met (it does require some space above and behind the attic opening where the ladder sits when it is stowed).The ladder is on the light weight side. I weigh @ 220 and I feel like I am about as heavy as could use it.

Ladder Stabilizer Standoff Brackets with Foam Elbows (Sold in Pairs)

Levelok

Based on 54 reviews Check latest price

Product description

The Open Rung Standouts are Ladder Stabilizers made by Levelok. These brackets can be slid into the rungs of most ladders (rung openings of 1 inch or greater) to add stability and work around obstacles like windows. The standout brackets weigh only 1.5 pounds. They are made of aluminum with foam elbows and the manufacturer SKU is ST-ORS-3. Once inserted into your ladder they extend a foot beyond the edge of your ladder. This foam elbow material is for light duty, occasional use only. For heavier duty, longer lasting elbow material, Levelok offers the ST-ORS-3XL model. Warranty – 12 months parts and labor for manufacturing defects.

  • Standards Compliance - Meets all ANSI and OSHA requirements for ladders up to Type 1A, 300 pound duty rating.
  • Ladder Compatibility – Fits most aluminum and fiberglass, extension ladders with open D or O rung holes on outside of ladder rail. Hole must be a minimum of 1″ in diameter.
  • Installation Method – Attaches to ladder rail without fasteners. To attach, press 2 bracket ends in, toward each other, slide ends into rung holes and release.
  • Bracket weight – Each bracket weighs 12.3 ounces
  • This foam elbow material is for light duty, occasional use only. For heavier duty, longer lasting elbow material, Levelok offers the ST-ORS-3XL model.

User questions & answers

Question: What is the maximum standoff distance
Answer: I do not remember. Maybe 2 feet. Or over 1 foot.
Question: Makers origin
Answer: I do not see what the question is: Do you want to know the mfg? I did not care and threw label away as the Stabilizer Ladder brackets work GREAT when attached to a ladder. I have gutters and this tool prevents the gutters and stucco from getting damaged.

Louisville Ladder LP-2210-00, 1-(Pack)

Louisville Ladder

Based on 457 reviews Check latest price

Product description

Includes Adjustable Ladder Stabilizer for Extension and Single Ladder - LP-2210-00.

From the Manufacturer

Louisville LP-2210-00 Most popular and economical Adjustable Aluminum Ladder Stabilizer fits extension and single ladders with rail up to 4 inches x 1 3/4 inch. Great for painting around windows, doors, and gutters without damaging them. Adjusts to most sizes easily. Attaches to ladder easily with u-bolts and comes with replaceable heavy duty rubber tips. Product measures 12.79 inches wide x 48.5 inches in length x 2.2 inch height.

  • SUPERIOR BUILD: This aluminum Louisville stabilizer is made of superior quality with an elegant design and smooth finish. In addition the stabilizer attach has 2 U-bolts, which feature replaceable extra heavy duty rubber tips
  • ADJUSTS TO YOUR LADDER: The stabilizer measures 12.79" W x 48.5" L x 2.2" H

User questions & answers

Question: does this comw with the u bolts
Answer: Mine came in a beat up box and u-bolts were missing. I returned it and bought another one from Zoro. The U-bolts and a few other screws are included with the stabilizer.
Question: Can I use this on a Werner ladder
Answer: It just clamps on so it should fit or you can make it work with a few bolts and nuts. I permanently attached it as too much trouble to take it on and off. Very stable. I wanted to get the leg extenders but Home Depot wanted $99.00so will use a board.
Question: Whats the max depth/clearance of the stand off (distance from the wall to the ladder
Answer: It's in storage, but it is about 14-16". However, I modified it by simply drilling a pair of extra holes on the legs which gets you to about 2'. U could also buy a thick-walled pvc pipe and extend the legs by sliding the pipes over the legs. I did that on my old one
Question: We have the need for this to open to 40". What is the expandable width? From what to
Answer: There are several positioning holes that allows you adjust the width from about 36" to 45"

Product features

Easily attaches with Ubolt
Simplifies painting around windows and other objects
Easily adjust standoff length with a wing nut

Ladder-Max Stand-Off Stabilizer

Based on 1 reviews Check latest price

Product description

Recomended in recent issue of This Old House#1 Selling Ladder Standoff in North AmericaInstalls On and Off Your Ladder in SecondsProtects Your Gutters and Keeps You SAFE! 19 of Standoff.Ladder-Max Stand-Off Stabilzer The Original Made in the USA

  • Brand New in box. The product ships with all relevant accessories

User questions & answers

Question: Will this work on a roof with gutters and a low-slope
Answer: How do you mean? The intended use is to have the hook go over the ridge on a roof, then the pole and handles help support a single worker. More details on intended use from the manufacturer: -Weight limit do not exceed 350 lbs when using this device. -Roof pitch limits do not exceed 45 degrees /12/12 pitch. -Do not pull up when using this device on a roof. -Be sure device is secure on the roof before applying your weight. -DANGER watch for wires this device conducts electricity. -This device is to be used only as intended, intended use first man up, last man down and or one-man inspection tool. -Do not use as a work platform. -Always maintain a three-point stance. Hope this helps!
Question: I've seen several photos of ladder max attached to the top rung of an extension ladder. Is that recommended by the manufacturer
Answer: Thats way high! Last year 450-500$
Question: Is it easy to remove and reinstall My ladder use doesn't always require a standoff stabilizer
Answer: I haven't measured but in my case it solved my problem. Basically -- I am painting my house and I was facing a particular problem. At the roof line, how can I take off the gutters while the ladder is sitting on them. The stand off made it possible to stand off from the roof itself. Anyway, the width is equal to a typical American window width and the stand off it about 6 inches at the top. Hope that was a little helpful ....
Question: Will this work on the MT-22 Werner 22-ft Aluminum 300-lb Telescoping Type IA Multi-Position Ladder? Many thanks
Answer: It is designed to use on a wall but I also have vinyl and have a small addition that is flat enough for a membrane roof. I can use the end (with no gutter) to place the ladder on the facia and since it is covered with aluminum does no damage. I would suggest getting gutter screens to avoid this task completely.

Roof Zone 19-Inch Stand-Off Extension Ladder Stabilizer - Ladder Standoff for Added Stability and Safety - Prevents Gutter Damage

Roof Zone

Based on 117 reviews Check latest price

Product description

Roof Zone 19-Inch Ladder Extension Steel Stand-Off Ladder safety is our number 1 priority. We built our ladder stand off with durable steel materials to ensure you stay completely safe and secure when up on your ladder. Improves your stability no matter how high while also protecting your gutters and siding from costly damage. Why Choose Roof Zone? -19 inch stand off between yourself and whatever surface you are leaning against. -Premium gutter guard that prevents you from leaning an extension ladder against your gutters. - Features 2 rubber bumpers that protect your siding from damage. -Built with lightweight yet strong steel materials that will provide you with the safety and stability you’re looking for -They can attach to track rungs where no hardware is required. -Durable ladder accessories with minimal assembly required -Quick and easy installation. Install on your ladder within seconds. -Works Great With: Aluminum, Wood, and Fiberglass portable/extension and single section ladders. Type 1A, 1AA, I, II, and III. Safe and Secure: The Ladder Stabilizer Stand-Off is manufactured and tested to meet or exceed OSHA ladder standards (1926.1053). -Ladder Stabilizer Great For: General contractors Homeowners Gutter cleaners Window cleaners Installing Christmas lights Painting and other DIY home projects Specs: Width: 20 in. Height: 3 in. Depth: 35 in. Weight: 10 lbs

  • 19-INCH WALL STANDOFF – Ladder standoff gutter guard protector that keeps you 19 inches away from the sidewall. Gives you plenty of room to safely work without the worry of damaging your siding, gutters, or roof. Prevents costly damage
  • GREAT FOR EXTENSION LADDERS – Easily attach to your standard extension ladder. The stand-off easily attaches to your ladder within seconds with just minor assembly required. Attach to round rungs with no hardware required. NOT recommended for ladder hoists
  • ADDED SAFETY & STABILITY – The ladder stand-off locks into place on your extension ladder giving you the stability you need to safely get the job done. Keep yourself a safe distance from the wall, gutters, or roof
  • DURABLE MATERIALS – The Roof Zone Ladder Extension Stand Off is built with strong, high-quality steel materials to keep your extension ladder sturdy. Features 2 rubber bumpers on each end to protect whatever surface you are leaning against. Meets OSHA ladder standards
  • GREAT FOR – Our ladder stabilizer standoff is great for general contractors, gutter cleaning, roofers, painters, installing Christmas lights, window cleaning, and for homeowners who like to do their own home maintenance

User questions & answers

Question: can it be used with little ladder
Answer: If it's a standard size ladder it should fit. The stand-off fits extension & single ladders with rail up to 4" x 1 3/4" and D-rung. Holds ladders 12" from walls & spans 48" to clear most windows and can be adjusted across the width.
Question: Will this fit over a 36 inch window plus a couple of inches trim on each size
Answer: I was skeptical about this being able to rest on the roof when I cleaned gutters. But it works. I have a shallow sloping roof and the stabilizer rests on the roof about 8 inches above the gutter with the ladder at an appropriate angle. I can clean the gutters without damaging them, which was why I purchased the stabilizer. It shouldn't hurt the shingles as long as you're careful.
Question: Can it be used with an extension ladder that has round rungs
Answer: No, it is paper envelopes
Question: Will this extension work on Little Giant ladder
Answer: It goes on and off sale

Roofers 220539 RT-LM Mount - Ladder Stabilizer That Fits Inside Gutters

Roofers

Based on 535 reviews Check latest price

Product description

Ladder Mount is the “easy to use” gutter docking station for ladders. It provides gutter protection and fits inside any 5” or 6” gutter. It secures any ladder safely in place and disperses the ladders weight against the fascia, not the gutter

  • Fits inside all 5” and 6“ gutters to support a ladder safely in place while preventing gutter damage supports weight of ladder against fascia, not the gutter
  • Installs easily into any 5” or 6” style gutter using a broom handle or pole to position ladder mount in the gutter prior to use
  • Easy to use gutter docking station for ladders

User questions & answers

Question: Can you securely attach the ladder to this device or does the ladder just rest against it
Answer: The ladder just leans against it. It does seem pretty secure, as long as the ladder is angled to lean against the house. Also, I have seen devices you can buy that you can clamp the ladder to the gutter, if you want. You can find them on amazon.
Question: Does the mount fit over 5 inch speed-screw gutter hangers
Answer: I'm not sure what a speed screw gutter hanger is, but I can tell you this device rests in between the supports for the gutter. It is easily placed using a broom handle and when the ladder rests against it there isn't pressure on the gutter. The rubber on the device helps to hold the ladder in place and the ladder is very very stable.
Question: Will the weight of it and the ladder cause an alluminum gutter to sag
Answer: It worked well with my Little Giant ladder. The weight of the ladder is against the back of the gutter so it doesn't touch the front of the gutter that would cause it to bow or sag.
Question: Does the Gutter Guard have a rubber lining on the side which protects the gutters paint
Answer: If you look closely at the picture, notice that the left side of the device rests on the inside of the gutter. It doesn't touch the outside paint.

Werner 97P Adjustable True Grip Stabilizer and Surface Protectors for Extension Ladders

Werner

Based on 185 reviews Check latest price

Product description

From the Manufacturer Adjustable True Grip stabilizer and surface protector. Span adjusts to 49, 57 or 65-inches. Stand-off distance 12 or 39-1/2-inches. Rectangular stabilizer spans double windows. Quickly convert stand-off distance for larger overhangs. Mounts quickly and easily. Comes with one stabilizer, rubber pads, fleece bonnets, mounting hardware and instructions. Fits rails up to 3-by-1-3/16-inch. Fits on Werner Aluminum Extension Ladders Series: D716-2, D1100, D1200, D1300, D1500, D500-2 20-foot to 24-foot, D1700-2EQ, D1800-2EQ.

From the Manufacturer

Adjustable True Grip stabilizer and surface protector. Span adjusts to 49, 57 or 65-inches. Stand-off distance 12 or 39-1/2-inches. Rectangular stabilizer spans double windows. Quickly convert stand-off distance for larger overhangs. Mounts quickly and easily. Comes with one stabilizer, rubber pads, fleece bonnets, mounting hardware and instructions. Fits rails up to 3-by-1-3/16-inch. Fits on Werner Aluminum Extension Ladders Series: D716-2, D1100, D1200, D1300, D1500, D500-2 20-foot to 24-foot, D1700-2EQ, D1800-2EQ.

  • Span adjustment 49-inch, 57-inch or 65inch
  • Stand off distance 12-inch or 29-1/2-inch
  • Rectangular stabilizer spans double windows
  • Fits rails up to 3-inch by 1-3/16-inch
  • This comes with 1 stabilizer, rubber pads, fleece bonnets, mounting hardware and instructions

User questions & answers

Question: Will this work with the AC 78 Quick click stabilizer
Answer: Based on the pictures of each item, I do not believe this item will work “with” the Werner 97P stabilizer installed on the ladder. The Werner 97P installs on the ladder with u-bolts using tools....this item installs on ladder using no tools. The cross- bar of the Werner 97P I believe will interfere with and/or prevent the proper installation of the AC 78 quick stabilizer.....the Werner 97P will need to be removed from the ladder. The major difference between the two items is the total distance of “stand-off” each product offers. Some houses have a larger depth of “eav” overhang requiring the use of the Werner 97P stabilizer to be installed on the ladder to properly accommodate the work requirement.
Question: span widths - 49/57/65 - would it be possible to drill additional holes in between those that are already there to get different specific widths
Answer: I need to customize this a bit to span a large window that was close to the corner of a house. I bought some 1 3/4" OD (1 37/64" ID) 304 stainless steel square tubing from Grainger. P/N 4YUL3. This is a heavier wall and stronger material than the stock center section (which I needed with the longer span), but still fits the ubolts, and gives a lot of options for customization. I don't recall if I used stainless just for corrosion resistance, or that was the only material I could find that had the combination of ID and wall thickness that I wanted. Cost about as much as the stabilizer, but when I'm 28' in the air, I'm not counting pennies.
Question: I wonder how much pressure you can put on vinyl siding with foam insulation underneath? On wood/brick only
Answer: Well, I'm a woman and needed some help with getting some shutter screws loosened, so I enlisted my neighbor, who is a burly guy of about 250 lbs. My house has vinyl siding and there was no problem. I also pressure washed my house and used the stabilizer and had no resulting damage whatsoever. I did use the rubber pads, so that is helpful.
Question: whats the weight rating on this
Answer: That is a great question, I had to look at the label on the unit. It states max weight of 300 pounds. It also states that is the total weight of one person and materials. Hope this is helpful

Ladder Leveler Stabilizer (KeyLok Quick Connect Style) Complete Kit

Levelok

Based on 388 reviews Check latest price

Product description

Quick Connect Ladder Leveler Kit

  • Quick Connect Ladder Leveler Kit, contains 1 leveler and 2 base units.
  • Work Safely On Uneven Ground, extends a full 10 inches.
  • This is the best leveler on the market today .Fits Aluminum, Fiberglass & Wood Ladders
  • Base units mount to the ladders rails and the leveler can be moved from side to side.
  • Meets or exceeds ANSI and OSHA requirements up to and including Type 1AA 375#

User questions & answers

Question: So for any ladder that this is being used on, you're basically drilling into the ladder to install nuts/bolts for the mounts
Answer: Yes, But, All ladders, even Werner, are not the same. I have one 28 foot Werner aluminum extension ladders and a half dozen fiberglass step ladders and baker scaffolding. I would have had to structurally modify the fiberglass ladder in order to attach the leveler, so, I did not attach a leveler to any of them. Note that it is very handy and comfortable to use a fiberglass step ladder on uneven ground for electrical work. I attached put a leveler on each leg of a 28 foot extension ladder and just checked and there are 6 shims on each leveler base to raise the leveler above the step joints. Note that the base is permanently attached to the ladder leg and it must be parallel to the ladder. The leveling mechanism attaches to the ladder. Since I got 2 base units with each of the 4 leveling systems I purchased, I had 4 left over (after attaching to my scaffolding - see my review of the leveler). So I put 2 on the extension ladder and still have 2 base units left. I use the levelers on the scaffolding whenever I use scaffolding outside. But I have never used the levelers on the extension ladder as it is too easy to just use scraps of 2x6 pressure treated lumber which I leave in various spots in the yard.
Question: How much extension does it provide? Will it extend your leg at least 6" so it works on steps
Answer: I can extend one leg ten inches. I cannot praise this device enough! (I do remove the extender when I move the ladder an appreciable distance because of the extra weight -- I'm a geezer.)
Question: Did you install this on a type II ladder rated for 200 or 225 lbs? My box says not for these type ladders. Item description says for "most ladders
Answer: The manufacturer says:"Note: This Leveler is approved for installation on ladders up to and including Type 1AA (375 lb) duty ratings."
Question: Will this leg leveler work on the Little Giant Classic model
Answer: I belive it will. It does have installation instructions for this type of ladders. I have never installed on Little Giant.

Ladder Stabilizer Standoff Brackets with Silicone Elbows (Sold in Pairs)

Based on 117 reviews Check latest price

Product description

Ladder Stabilizer Standoff Brackets with Silicone Elbows (Sold in Pairs)

  • Standards Compliance - Meets all ANSI and OSHA requirements for ladders up to Type 1A, 300 pound duty rating.
  • Ladder Compatibility - Fits most aluminum and fiberglass, extension ladders with open D or O rung holes on outside of ladder rail. Hole must have a minimum of 15/16 of inch clearance
  • Installation Method - Attaches to ladder rail without fasteners. To attach, press 2 bracket ends in, toward each other, slide ends into rung holes and release
  • Each bracket weighs 12.5 oz constucted with aluminum tube, 31/32” outside diameter
  • Warranty - 24 months parts and labor for manufacturing defects

User questions & answers

Question: There are two products. st-ors-3 with foam sleeves and st-ors-3xl which has textured silicone covers (per levelok website). which is this
Answer: The pair for $80 has silicone elbow covers.
Question: Can it be used on slate roof
Answer: I would say yes as they have a soft plastic that covers where they rest on the roof. I love these as they give great stability and saves you from the ladder kicking out from under you , I have fallen a couple of times and these give me peace of mind.
Question: Will this work for a flat roof? Or is there one that will
Answer: ....if you don't want the ladder to lean against the eves or gutters they will work great positioned against the top of the wall if you have little or no overhang...positioned on a roof there will need to be 'some' pitch to it..
Question: Will this work with a Keller extension ladder
Answer: ...from what I see the Keller fiberglass extension ladders do not have open rung holes....in that case then no....however any ladder with 1" or larger exposed rung holes should accept these standouts...

Multi-Pro for corners and more, ladder stand-off/ stabilizer

Based on 85 reviews Check latest price

Product description

This newest Ladder-Max "Multi-Pro” standoff stabilizer combines the proven rugged design and features of our fixed 19” model, ABM 2002, with the ability to be modified to meet your specific standoff stabilizer needs. The new Multi-Pro has attachments to adapt it to fit corners, span a 4’ wide window, create a greater standoff from the wall, a closer standoff distance, or add a convenient tool & project tray. It has been certified to meet ANSI standards. Attachments are easily interchanged within minutes by removing 4 bolts, inserting the desired attachment and tightening the 4 bolts. The Multi-Pro is shipped with the base unit & corner attachments. Other attachments sold separately. For convenience add our NEW Tool and Project Tray, the Multi-Tray MT 1000. It easily connects with two re-usable zip ties for quick on and off.

  • Ladder-Stand-off/ Stabilizer for Corners and More. Made in the USA.
  • Customize your ladder stand-off to meet all your needs. Attachments sold seperately.
  • The Multi-Pro is shipped with the base unit & corner attachments.
  • Fits all extension and articulated ladders.
  • ANSI certified for safety. On and Off your ladder in seconds.

User questions & answers

Question: What is the width or span of this unit where it rests on the wall (distance between the orange caps
Answer: 25 inches between caps, standoff the wall 12inches.
Question: will this fit on a little giant telescoping ladder
Answer: The Multi-Pro will fit as long as the rungs on your ladder are no more than 1.75 inches thick, wider than 11.5 inches and 12 inches on center. Thank you for checking with us.
Question: Will this fit on a Werner MT-22 extension ladder
Answer: yes, I have both
Question: Will it fit the Werner D6228 28ft extension ladder
Answer: I own a D6228-2 fiberglass Werner 28ft extension ladder (purchased at Lowes) and it works just fine, no problems. The way the Multipro is constructed, I don't believe there would be a problem on AL vs. Fiberglass.

Qualcraft 2470 Corner Buddy Aluminum Ladder Stabilizer

Qualcraft

Based on 273 reviews Check latest price

Product description

Qualcraft 2470 Corner Buddy Aluminium Ladder Stabilizer

From the Manufacturer

The Qualcraft Corner Buddy, Ladder Stabilizer promotes utility and safety. The Corner Buddy is designed for use on multi-surfaces, corners, flat, round and multi-dimensional construction. You can use the corner buddy all around the house without having to be removed from a ladder. Connection and removal are very easy. 'The Corner Buddy' is powder-coated in safety yellow and comes with rubber bumpers for protection against the work surface. If your in the market for a ladder stabilizer their is no substitute to the Qual-craft Corner Buddy.

  • For use on a corners, flat, round, or multi-dimensional construction surfaces
  • Transport the ladder from job to job without having to remove from ladder.
  • Gives easier access to gutters, downspouts and soffits.
  • Yellow safety coating and rubber bumpers
  • Add stability to your ladder and creates a safe working environment

User questions & answers

Question: Where do I obtain replacement end caps for this? Just the little orange caps
Answer: Lowe's and Home Depot carry replacement caps in their ladder department, they are the same as the caps on their ladder stand offs.
Question: How wide is the opening, from cap to cap? Thank you
Answer: 28 3/4" inside measurement from cap to cap.
Question: What is the standoff distance from a wall
Answer: rough guess is 18 inches on the flat wall, about 12 inches on the corner.
Question: Does this work on fiberglass ladders
Answer: This answer applies to aluminum and fiberglass ladders. No it doesn't work. It does not bolt correctly to the ladder and the arms are too short for the ladder to clear the corner of the house.

Latest Reviews

View all