10 best attic access

Product description

The access panel consists of a welded aluminum frame and is manufactured with 5/8 inch inlayed drywall and two latches. The access panels are equipped with a safety- system to prevent accidental opening. This safety system must be reattached if the hatch is removed. The reveal of 1/16 of an inch is visible between the outer Frame and door hatch. The concealed snap locks open The access panel when pressure is applied to the spring loaded latch side. The door is detachable.

• Flush installation for ceilings
• Superior engineering & innovative design
• Fast delivery

User questions & answers

Question:	Will this work for 24 inch on center ceiling trusses, or 22.5 inch between joists
Answer:	it worked fine for me
Question:	Confused on the 24" on center truss question. someone answered yes it will fit below, one of the reviews says no. will this work in 24" oc truss
Answer:	Yes, this is the right part!
Question:	Is this door fire rated
Answer:	Yes, this item is compatible with your unit. It is a direct replacement for part number 0130f00008s.
Question:	Does this require that the ceiling opening be 22”x30”? Can it be adjusted to a slightly smaller opening
Answer:	Mine only came with the valve. Not sure what a LP kit is.
Question:	What size door frame opening is needed
Answer:	Yes, this should be correct for the GMP series. Thanks for your inquiry.
Question:	Would this door work outside where rain would hit it
Answer:	Yes, this should be a direct replacement. Thanks for your inquiry.
Question:	What kind of hinge on door - continuous piano hinge
Answer:	Yes, this should be the replacement. Thanks for your inquiry.

Product description

The Acudor ed-2002 access door for walls and ceilings, designed for installation in all types of flush surfaces. Fabricated from galvanized steel and coated with a white baked on polyester powder paint, this door will perform well in high corrosive and exterior applications.

• Installation in drywall, plaster, masonry, tile or any flush surface
• Economical and attractive access door for walls & ceilings
• Formed door panel
• Concealed hinge
• 27 gauge steel door and frame 

User questions & answers

Question:	Is this door airtight
Answer:	If your looking at the 30x30 door, it’s 30 and 3/8” by 30 and 3/8”. But I did not get a hinged door, mine slides in place and has 5 latches but I ordered the door your looking at so not sure what you’ll get, but it’s very heavy duty, I would get all their frames add 3/8” to top and side
Question:	How does this product get attached to drywall
Answer:	no... im using it indoors
Question:	Is this fire rated
Answer:	Yes, there is a continuous piano hinge on the door!
Question:	Will this work for crawlspace access? Can a body slide thru it easily
Answer:	they are pretty much universal. if the plug is wrong you can always splice in your old plug.

Product description

Louisville Ladder premium wooden attic ladders are ideal for obtaining easy, unobstructed access to small attic or storage areas. Able to hold up to 250 pounds, each ladder has grooved steps to provide maximum traction. A Louisville premium attic ladder is great for using in tight spaces where regular staircases won't fit, and it features exclusive metal ez-hang straps for quick and simple installation. Because each ladder meets the standards set by the ansi and OSHA, you can feel reassured knowing your Louisville Ladder is safe for your whole family to use.

Louisville Ladder Premium Wooden Attic Ladders are ideal for obtaining easy, unobstructed access to small attic or storage areas. Able to hold up to 250 pounds, each ladder has grooved steps to provide maximum traction. A Louisville Premium Attic Ladder is great for using in tight spaces where regular staircases won't fit, and it features exclusive metal EZ-hang straps for quick and simple installation. Because each ladder meets the standards set by the ANSI and OSHA, you can feel reassured knowing your Louisville ladder is safe for your whole family to use.

Offers Greater Access to Attic and Storage Areas

With the Louisville Ladder Premium Wooden Attic Ladder, you can gain unobstructed access to attics and other ceiling compartments. Able to be used in tight spots, this ladder unfolds to provide a compact and sturdy way for you to reach high-up storage areas. Not only does this ladder save you space, but it also saves you money on building expensive staircases. The Louisville Premium Attic Ladder folds and unfolds quietly. When you're ready to use it, simply tug on the ergonomic T-Handle that's designed to give you a secure grip for easy opening.

Built for Strength and Safety

Each Premium Wooden Attic Ladder is built to withstand 250 pounds of pressure (person included), and features grooved steps to provide maximum traction as you move up and down. Heavy-duty hinges not only help the ladder unfold smoothly, but they also keep it from wobbling dangerously as you climb. A "full grip" hand rail gives you added security as you hold a box in one hand and grip the ladder in the other.

The Louisville Premium Attic Ladder meets safety standards set by the American National Standards Institute and the Occupational Safety and Health Administration.

Designed for Easy Installation and a Proper Fit

This premium ladder features metal E-Z hang support straps to help you install it quickly and safely. Easy-to-follow instructions show you how to fit the ladder to the proper dimensions of your ceiling and floor, creating a sturdier base when opened and a perfect fit when closed.

What's in the Box

One Louisville Ladder Premium Wooden Attic Ladder.

From the Manufacturer

Louisville Ladder 10-Feet, Wood Attic Ladder Type I, Working Load Limit 250 LB, 22.5-Inch by 54-Inch by 8-Feet 9-Inch - 10-Feet, Perfect for Any Attic Space, In The House, Garage, Anywhere, Easy To Pull Down and Raise Up.

• Rough opening dimensions: 22.5-By-60-inches
• Ceiling height: fits 8-foot 9-inches to 10-foot high ceilings. Rail Size - 0.75 x 3.375 inches
• Sturdy and safe: able to hold up to 250 pounds, with reinforced, grooved steps to provide maximum traction
• Superior stability: heavy-duty hinges not only help the ladder unfold smoothly, but they also keep it from wobbling dangerously as you climb. Wire rod under each step provides added strength
• Quick installation: exclusive ez hang strap system makes for a quick and easy installation

User questions & answers

Question:	Is this ladder fire rated for garage installation? This is requirement in California
Answer:	It is 12" WIDE BY 1 1/2" DEEP
Question:	My studs are @22.5" on center, is this too small for the ladder? Or does the frame meant as 22.5" on center, rather than 24" (I think) on center
Answer:	sorry ... sounds like a safety standard I'm not familiar with
Question:	Will the L22 4P fit in a 22" opening
Answer:	Hi, I start collapsing from the top down. The most important item for safety is not having your fingers in a position that they get pinched when a section drops.
Question:	I bought a house with this style of attic ladder, but the springs are missing. Does anyone know the length and diameter of the springs
Answer:	NOT IF THE AREA YOU ARE WORKING IS ABOVE 10 FEET...IT IS SAFE , DURABLE & LIGHTWEIGHT...THE MAX EXTENSION IS 12 FEET

Product description

This Louisville elite series aluminum attic ladder has a working load capability of 375 pounds. This aluminum attic ladder fits ceiling heights of 7-Foot 8-inches to 10-foot 3-inches and has a Rough opening of 22.5-Inches x 54-inches. The elite AA2210 attic ladder features slip resistant cross-tread steps, adjustable shoes, an advanced cylinder design, and an ergonomic T-handle. The Louisville AA2210 aluminum attic ladder meets or exceeds the safety standards set by ansi.

From the Manufacturer

This Louisville Ladder Aluminum Attic ladder helps homeowners reach additional storage space. Homeowners looking to find extra storage space will find that the Louisville Attic ladder model AA2210 number has many user-friendly features. The Louisville aluminum attic ladder allows a wider clearance to reach the storage space easily. It utilizes a gas cylinder instead of a traditional spring mechanism. The gas cylinders provide more clearance space allowing easy transport of large boxes. The gas cylinders allow the smooth opening and closing of the door, reducing the force needed with traditional spring operated attic doors. The gas cylinder design also eliminates destructive door slamming. This Louisville attic ladder features 3-1/4 inch deep steps to increase stability. The adjustable shoes on the Louisville attic ladder make it easy to fit with any type of flooring.

• ROUGH OPENING DIMENSIONS: 22-1/2 x 54-inches
• CEILING HEIGHT: Fits 7-foot 8-inches to 10-foot 3-inches ceilings. Step Depth : 3.25 inches.Rail Size : 3.125 inch
• STURDY AND SAFE: Able to hold up to 375 pounds, with reinforced, grooved steps to provide maximum traction. Heavy-duty hinges not only help the ladder unfold smoothly, but they also keep it from wobbling dangerously as you climb
• CUSTOMIZABLE ELEGANCE: Elegant and smooth finish with adjustable spring tension; Ceiling Height Maximum (ft): 10.25

User questions & answers

Question:	Do you have installation available for this item? Atticc ladder
Answer:	Yes it does
Question:	I have an attic ladder I want replaced that the outside frame measures 24 3/4" x 53 1/8". Would this ladder be the right size with shims
Answer:	It's made from China.
Question:	I have 22" wide, so mine is not as 'standard' as I thought. Neither would work then for me
Answer:	Yeah, it can be unfolded into straight 16feet telescoping ladder.
Question:	I ned a ladder that is art least 11 feet, which one should I get
Answer:	The height depends on angle of A shape, but most height is 250cm, about 8.3ft

Product features

Step 1 Measure the rough opening must be 54" by 22.5"

THE JOURNEY TO FIND THE CORRECT ATTIC LADDER STARTS HERE

TOOLS NEEDED:

Step ladder, hammer, Phillips screw driver, Framing square, drill with 1/8" bit, 2 ea 7/16" wrenches, 2 ea 1" x 4" x 32" boards, Wood shims, Tape Measure

Step 2 measure the floor to ceiling height

If the floor to ceiling height where you intend to install your attic ladder is between 7'8" and 10'3" this is the correct attic ladder for your space.

Step 3 Measure the area where the attic ladder will be opened to ensure proper swing space

You will need at least 74-inches to ensure that the attic ladder has enough space during opening.

Step 4 Measure the landing space for the attic ladder

Landing space may vary depending on your ceiling height. If the ceiling is 10 feet 3-Inches, you will need 67-inches of landing space. This is the maximum amount of space needed.

Louisville Ladder Elite Aluminum Attic Ladder 375 Pound Capacity

This Louisville Ladder Aluminum Attic ladder helps homeowners reach additional storage space. Homeowners looking to find extra storage space will find that the Louisville Attic ladder model number has many user-friendly features. The Louisville aluminum attic ladder allows a wider clearance to reach the storage space easily.This Louisville attic ladder features 3-1/4 inch deep steps to increase stability.

• ✅ One Button Retraction: Convenience is key! That’s why we’ve designed this ladder with easy one button retraction. Simply press down on the thumb buttons and the ladder will slide down effortlessly.
• ✅ Premium Aluminum Alloy: The Ohuhu Telescopic Extension Ladder is crafted from high-quality aluminum alloy. It’s lightweight and easy to carry without sacrificing strength.
• ✅ Rock-Solid Stability: This ladder is as sturdy as they come, with a weight capacity of up to 330lbs! Non-slip end caps hold the base firmly in place, while extra-wide steps ensure safe climbing. We’ve also made sure that this ladder is compliant with EN131 and SGS European safety standards to give you some peace of mind.
• ✅ Safe to Use: No more pinched fingers! The telescoping ladder’s high quality construction ensures that each section expands and retracts safely. Intelligent locking pins hold the sections in place and prevent sliding, and the ladder will retract smoothly and slowly.
• ✅ Extreme Versatility: This telescopic ladder is the homeowner’s best friend. Thanks to its maximum height of 12.5 ft (3.8m) , the Ohuhu Telescope Extension Ladder is perfect for all of your specific needs. Use it to help paint the walls, change the light bulbs, clean the windows, and everything in between.

User questions & answers

Question:	How much time/effort does it take to extend and how much to collapse this ladder
Answer:	Yes it automatically switches from heat to a/c if programmed to do so
Question:	Is this really durable to use to climb on the roof
Answer:	Yes it does. It has four modes: Auto, Cool, Heat, Em Heat.
Question:	Can i safely extend the top couple of rungs and then 3 or 4 of the bottom rungs? or do i have to extend either all top or all bottom? thanks
Answer:	AA batteries are required to operate the thermostat. The 'C' wire can be connected but the thermostat will not function without the batteries.
Question:	How much noise does the ladder make when climbing it? And extending and restracting as well
Answer:	The AA batteries are required. The thermostat cannot use a 'C' wire for power. There are 2 warnings for battery power, but instructions say to replace batteries yearly even without seeing warning. If changed quickly, you don't lose anything, but they say you don't lose programming-only date and time if slow like me!

Product features

Ohuhu 12.5 FT Aluminum Telescoping Ladder, ANSI Certified & EN131 Certified Extension Ladder with Spring Loaded Locking Mechanism, 330 Pound Capacity

Durability, Versatility, and Portability

Tired of lugging around your bulky, cumbersome ladder? Make your life a little easier with the Ohuhu Telescopic Extension Ladder. Crafted from premium aluminum alloy, this ladder is lightweight and easy to carry. It’s just as strong as it is portable— the rungs can support up to 330 lbs. It’s the perfect tool to help you paint walls, change light bulbs, clean windows, clean the gutters, repair the roof, and so much more.

Easy Extension and Retraction

Whether you need a small boost or some serious height, the Ohuhu Telescopic Extension Ladder will get the job done. The high-quality extension mechanism allows you to adjust the height quickly and effortlessly (up to 12.5 ft), and locking pins hold it securely in place. Done for the day? Press the two thumb buttons and the ladder will retract smoothly.

Bonus Carrying Strap for Compact Storage

Short on space? We’ve got it covered. Use the bonus heavy-duty carrying strap to make sure the ladder stays closed in compact areas in the shed, garage, or even the trunk of the car.

Note:

• Do not put your fingers on or between the rungs while the ladder is retracting.
• Use the side grip handle to lift the ladder.
• NEVER CLIMB OR STAND ON THE TOP THREE RUNGS OR YOU MAY LOSE YOUR BALANCE

2 Way to Retract Ladder

Press the two thumb buttons simultaneously to retract the whole ladder at one time.

Red Buckle

Press the two red buckle under each rung to retract upper rung at each time.

Same way to adjust the ladder from a higher height to a lower height.

Strengthening Footboard

Portable Grip Handle

Non-Slip End Cap

Product description

WERNER LADDER AA1510 AA1510 LADDER Aluminum ATTIC 250LB is rated for 250 pound load capacity; lightweight and easy to open and close with the included assist pole; installs into small openings for access to untapped storage space; ideal for hallways, closets and other tight spaces; non-marring feet; telescoping design gives you quick, hassle-free access to small attic openings anywhere or anytime; hardware for door included (door not included).

• Lightweight and easy to open and close
• Includes assist pole
• Installs into small openings
• Non-marring feet
• Ideal for hallways, closets and other tight spaces
• Floor to Ceiling Height Range

User questions & answers

Question:	When are you bringing back the telescopic ladder? This “compact” style doesn’t work if you do t have a lot of empty space inside your attic
Answer:	I've purchased a 32 oz and a gallon. I think I reviewed the 32oz.
Question:	Is it attached to the door
Answer:	The Alba website shows no parabens in the ingredients for this product. I believe the ingredients list on this Amazon listing is a misprint and should be corrected. If you’re in doubt, check the website or your local store (I think Target carries it) to verify the ingredients. Worst case, if you order this and it shows parabens on the product, just send it back and request a refund because it’s not the product you ordered if you ordered something without parabens.
Question:	what ladder is suitable for vertical position
Answer:	Smells horrid, like acrid oil paint. I can't use it and I usually like natural lotions, but the scent of this is unbearably strong and pungent.
Question:	I have a 30x30 rough opening and a 8' ceiling. Will this ladder work? Also, what is the quality of the ladder
Answer:	It smells but I wouldn’t say it’s a scent. Just lotion smell. It’s not strong but if you are sensitive it might bother you

Product description

Construction – Access door for drywall is manufactured in the USA with an 18 Gauge steel frame and 18 Gauge steel door. Interior metal access door can be installed in the ceiling or wall. These metal access door will pass any government inspection requiring a USA made product to be installed. Design – 7/16” door return lip edge. Metal access door has machine door catches on the top and bottom to prevent door from pushing in. Recessed to keep flush with drywall or ceiling to maintain beautiful aesthetics for any building. Durability – Access door for drywall has rust resistant galvannealed steel to keep your interior access door from rusting and deterioration. Drywall door panel has large accurate cam slots to keep cams sturdy in place and to prevent metal access doors from sagging. Functionality -- Access door for drywall is equipped with strong 14 gauge 304 stainless steel cam latches with large screwdriver slot for easy opening. Two stainless steel pin hinges at the top and bottom to allow opening to 165 degrees for a wider open work area. Finish – Paintable surface that is primed with white bake enamel on both inside and outside of the metal access door. Versatility -- Drywall door panel allows for ease access and protective covering for all your needs. Either it be for plumbing or electrical, these drywall door panels gives you free range on how you want to incorporate sleek, high quality accents to any project.

• Construction – Access door for drywall is manufactured in the USA with an 18 Gauge steel frame and 18 Gauge steel door. Interior metal access door can be installed in the ceiling or wall. These metal access door will pass any government inspection requiring a USA made product to be installed.
• Design – 7/16” door return lip edge. Metal access door has machine door catches on the top and bottom to prevent door from pushing in. Recessed to keep flush with drywall or ceiling to maintain beautiful aesthetics for any building.
• Durability – Access door for drywall has rust resistant galvannealed steel to keep your interior access door from rusting and deterioration. Drywall door panel has large accurate cam slots to keep cams sturdy in place and to prevent metal access doors from sagging.
• Functionality -- Access door for drywall is equipped with strong 14 gauge 304 stainless steel cam latches with large screwdriver slot for easy opening. Two stainless steel pin hinges at the top and bottom to allow opening to 165 degrees for a wider open work area.
• Finish – Paintable surface that is primed with white bake enamel on both inside and outside of the metal access door.

User questions & answers

Question:	What are the cut out dimensions
Answer:	yes it will. you may have to shim it with 1/2" material to get a tight fit but it will work
Question:	Does this have a one hour fire rating
Answer:	When you have framing that is 24 inches on center the net opening is the 22 inches. This would work. Normally when using this the framer would head it out. This means there would be a word on all four sides. This is a very nice product.
Question:	What will be the rough opening for the 14x14 door
Answer:	This door is not fire rated. You can perform a search on Amazon for ---> 22" x 30" Fire Rated Access Door
Question:	What is the Rough opening for the 24x
Answer:	The RO required for this door is 22 5/8 x 30 5/8 for it to fit. the behind drywall flange is 1 inch. Thank you

Product description

24" x 36" Universal Flush Economy Access Door with Flange - Acudor An economical and attractive access door for walls & ceilings. This quality product is ideally suited for apartments, condominiums and office buildings. A concealed hinge, rounded safety corners on the flange and a grey baked enamel prime coat are all standard features of this access door.Additional features include a flush fit door panel with formed edge.

• Rough Opening Size=24 ⅜" wide x 36 ⅜"
• Material:, Finish: Brushed Finish
• Lock / latch: 5 x Screwdriver Operated Cam Latch
• Hinge: Concealed
• Flange: Hidden

User questions & answers

Question:	Can the door be removed from the frame
Answer:	Try it
Question:	Can this be used outside
Answer:	The Door Armor Mini Combo Set consist of only the jamb shield and door shields. The Door Armor MAX set (larger one), will have the jamb shield, door shields, and hinge shields. We always recommend the Door Armor MAX set because your hinges will also be protected. The Door Armor Mini kit is a more cost saving solution.
Question:	What is the locking mechanism. I need it for the ceiling and want to make sure it will not be loose or open spontaneously
Answer:	The Door Armor MINI combo set (Aged Bronze) comes with screws and detailed instructions. You will need a drill and drill bits. Additional purchases will not be necessary.
Question:	What is the Rough Opening Size
Answer:	No

Product description

Simply 'The Fastest Access Panel in the UK'



Gone are screws, bracings or glue!



Utilising the unique 'FlipFix" fitting System, the panel grips firmly in place to any surround 8mm to 32mm thick.



Fitting Instructions



Using template provided position, mark and cut out your hole.

Insert product and tighten the FlipFix from the front until the bite is felt at the back.

Secure all devices, lock the door and walk away!





Manufacture Details



FlipFix is manufactured in the UK from 0.9mm Zintec Steel and consists of a hinged, fully removable metal door secured with a budget lock (plastic Tee Key provided) and a picture frame surround.

The panel is provided 'ready to fit' and finished with a PPC RAL 9010 (30% Gloss White) as standard. There is no requirement for additional painting on site.

The product shown is NON FIRE RATED and suitable for use in both walls and ceilings and available in a wide range of stock sizes.



Please visit www.flipfix.co.uk for more details.

• ▶ EASY TO FIT ◀ Draw around the provided pop-out template, cut your hole and place your panel. Flip the FlipFix device and drill until it clamps to the surround. It's that easy!
• ▶ SLEEK AESTHETICS ◀ Mitreless frame, flush lock and finished in a powder-coated RAL 9010 30% gloss white. Can be painted over if necessary.
• ▶ 10 YEAR GUARANTEE ◀ FlipFix Access Panels are built in the UK from the highest quality zintec steel. We’re so confident in our panel that we provide a 10 YEAR GUARANTEE.
• ▶ NO EXTRA MATERIALS NEEDED ◀ All you need to fit our panel is a pencil, saw, spirit level and drill. No need for wood, glue or screws!
• ▶ SUITABLE FOR WALLS & CEILINGS ◀ Perfect for accessing plumbing, cables and piping around the home and workplace. Not suitable for external applications.

User questions & answers

Question:	Is there a place to order an extra key
Answer:	No fire protection at all. It is just a metal frame with a door that opens and closes.
Question:	My wall already has a hole cut out, exactly 6" x 6" square. Will this fit inside that hole? What are the exact dimensions of the cut-out template
Answer:	The rough opening for the 14x14 is 14-1/4” x 14-1/4”
Question:	Can this be painted
Answer:	The rough opening for the 24x24 will be 24-1/4 x 24-1/4
Question:	Is the door removable after installation
Answer:	It is not airtight it is a fairly tight fit but not airtight you could probly run some foam weatherstripping tape along the inside.
Question:	Is the total thing 22” wide or is the actual door 22” wide. How would it mount on roof studs? Can I insert and screw in from the side of stud
Answer:	It doesn’t. You’ll have to line the back of the rim of the back of the door with wood or put it in between studs.
Question:	How do I remove the door from the frame without breaking a hinge tab
Answer:	This is not fire rated.
Question:	What is the total width of the plastic? Edge to edge
Answer:	Don't think an adult could very easily

Product description

Aepsp finish: pewter features: - the attic ease kit is an attractive alternative to the attic cord. Easy-grip reach hook stores easily in closet. Kit includes all parts and instructions. Country of manufacture: - United States. Product type: - latch/catch/bolt. Door type: -interior. Style: - traditional. Hand painted:- yes. Dimensions: overall product weight:- 0.65 Lbs. Pull: 38.25" H x 1.25" D.

• The attic cord is obsolete
• Each kit come with a convenient storage hook to keep it out of sight when not in use
• Available in pewter finishes
• Country of Origin: United States

User questions & answers

Question:	Installation instructions
Answer:	According to description "reduces interference to provide a cleaner sound and picture experience."
Question:	does the door hook stay flush with the ceiling or does it hang down
Answer:	mine is straight...does NOT lie flat to wall purchased July 2017
Question:	What is the length of the pole
Answer:	Yes, model 13475 has an integrated circuit breaker.
Question:	What do you need a screwdriver for
Answer:	Hello P, thank you for your question. Our GE Surge Protector includes 2 USB Type-A Ports. If you have any further questions, please don’t hesitate to respond or give us a call between the hours of 7:00 AM – 8:00 PM Central Standard Time, Monday thru Friday at 1-800-654-8483. Thank you.
Question:	Is this ladder fire rated for garage installation? This is requirement in California
Answer:	YES.
Question:	My studs are @22.5" on center, is this too small for the ladder? Or does the frame meant as 22.5" on center, rather than 24" (I think) on center
Answer:	Sure, There is a link point at the end of the light string, and it can be directly linked, Up to 10 light strings can be linked
Question:	Will the L22 4P fit in a 22" opening
Answer:	I don't see why not
Question:	I bought a house with this style of attic ladder, but the springs are missing. Does anyone know the length and diameter of the springs
Answer:	No it does not