13 best foam insulations

Product description

GREAT STUFF Big Gap Filler Insulating Foam Sealant offers the same benefits as GREAT STUFF Gaps & Cracks but fills gaps larger than 1 inch. So it's great for creating larger weather-tight seals to stop drafts and keep critters out. Plus, like all GREAT STUFF products, it's airtight, paintable, stainable and sand-able. It's polyurethane-based and perfect for all sorts of materials like wood, drywall, metal, masonry, glass and most plastics.

From the Manufacturer

Forms a permanent weather-tight seal to minimize drafts and insect infestation

• The product is 20Ozbiggap foam sealant
• Elegant design and smooth finish
• The product is manufactured in United states
• Exceptional adhesion to building materials
• Interior or exterior use
• Tack free in 6 minutes; Trims in 30 minutes and is paintable, stainable and sand able.
• One 20 oz. can = up to 30 tubes of caulk

User questions & answers

Question:	After the foam is fully expanded, if I wanted to can I remove the foam off with no problem
Answer:	After the foam has full cured, you can use a utility knife or hot wire cutter to cut away excess or detail the shape.
Question:	What is the length of the straw
Answer:	About 6 inch
Question:	Anyone insulate walls with this stuff
Answer:	As a basis for a wall insulation will seal the wall and provide a thermal “break”. Adding additional conventional insulation up to your region’s recommendation will do well for your energy Bill. Also consider using thin rigid foam board and sealing the connections with this product to get a insulation thermal “break”. See the manufacturer’s description. Considering the cost of these compared to a diy foam kit using a spray gun and tanks easily found at hardware stores or on Amazon is cheaper. Either way you save cost of labour. Given the assumption you are going for a long term solution in order to recoup your investment, a professional may still be the overall best choice. Check out Holmes’ book do it right.
Question:	Can I use this around a gas pipe
Answer:	Metal pipes expand and contract at a greater rate than the foam. Therefore, unless you put on a very thick coat, or your pipes are in a conditioned space, you may find cracks. Any foam exposed to sunlight will disentigrate.

Product features

GREAT STUFF Big Gap Filler

The average home has a half mile of gaps and cracks where air and moisture can enter. Air sealing and insulating projects around the home can typically save homeowners up to 30% on home energy costs, according to the Residential Energy Services Network (RESNET).

Seal out energy loss and improve comfort with GREAT STUFF Big Gap Filler Insulating Foam Sealant. GREAT STUFF Big Gap Filler is a ready-to-use, expanding polyurethane insulating foam sealant that fills, seals and insulates gaps up to 3 inches

Product description

Dow Froth Pak 650 is a Class A fire rated spray foam insulation kits are complete portable two part polyurethane spray foam systems. FROTH-PAKTM polyurethane foam is a two-component, quick cure, closed cell foam that fills cavities, cracks and expansion joints for insulation and air sealing. Air infiltration accounts for 25%-40% of a home's energy loss, FROTH-PAKTM stops that energy loss. FROTH-PAKTM Foam Insulation kits can be used to insulate stud wall cavities up to 2" thick, cold floors above unheated areas, crawl spaces, attic walls, and ceilings when covered with a code-approved barrier. The kit can be restarted and reused for up to 30 days after first startup. The Froth Pak 650 kit yields up to 650 board feet of foam. The Froth Pak 650 kit yields up to 650 board feet of foam (One board foot = 12"x12"x1"), 1.75 foam density. Includes Part A Tank - Isocyanate Part B Tank - Polyol, 15 Ft Hose Insta-Flo Gun dispenser & Hose Assembly, 1 Wrench (5/8") 1 Petroleum Jelly Packet (5g), 1 Operation Instruction Manual*Additional fees apply for returns due to the nature of this product

• SPECIAL NOTE! Due to state regulations, this product is not currently available for use in CA, CO, WA, NY, VT, MA, NJ. Signature required at the time of delivery.
• 🏡 GAP FILLER! Large openings that let air into a home rob homeowners of money, energy efficiency and comfort. FROTH-PAK Foam Sealant is designed to fill gaps and penetrations greater than 2 in. quickly and affordably, helping eliminate unwanted airflow throughout a home.
• 🏡 GREAT COVERAGE! FROTH-PAK 650 Sealant kit yields up to 650 board ft of foam (54.1-cubic ft). Industry-leading and customizable dispensing system helps ensure consistent flow rate, on-ratio application and complete dispensing of product. Uses include roof and wall junctions, wall and attic, electrical, mechanical and plumbing penetrations in the building envelope, bonds to wood, rigid foam, masonry, metal, drywall and more.
• 🏡 QUICK CURING! Chemical curing allows 2 part polyurethane foam to be dispensed, expand, and become tack free in seconds. Will skin over in 30-40 seconds and be completely cured in under 1 minute.
• 🏡 GREAT VALUE KIT: FROTH-PAK 650 Sealant Kit comes packed with everything you will need. Each kit includes: 15 ft hose and INSTA-FLO Gun Dispenser & Hose Assembly, Cone Spray Anti-Crossover Nozzles (8 cone nozzles, 4 fan nozzles), 1 Wrench (5/8"), 1 Petroleum Jelly Packet (5 g), and 1 Operation Instruction Manual. Note: Hose and Accessories Included Inside of "A" Box.

User questions & answers

Question:	Pls can this be used to insulate the interior of a shipping container home? How much of this product do I need for a 40 ft container
Answer:	Thank you for your interest in our product. You could use this product to insulate the interior of the container. The Froth Pak 650 covers 650 sq feet at 1 inch thick. You would need to figure out the square footage of your container and how many inches of foam you would like to spray to determine how many kits you would need.
Question:	Can this be used to fill the core of a cinder block wall? Will it expand and break the block
Answer:	I only used it to cover the walls and ceiling of my tiny house project. I don’t think it’s recommended for in block use. You could spray the block later for insulation.
Question:	I’m unsure of coverage in this system. I need to spray my crawl space walls. There is 62 linear feet of wall, at an average height of 2.5 feet
Answer:	The number on each froth pak is the total SqFt that kit will cover in 1" of thickness. This froth pak 650 will cover 650 SqFt in 1" of closed cell foam and give you an R value of 6.
Question:	Is this spray foam closed cell or open cell
Answer:	This product is Closed Cell

Product description

Loctite 2378565 Foam sealant, White

• EXPANDS TO FILL: Loctite TITE FOAM Big Gaps fills, seals, and insulates effectively around gaps and cracks up to 3 inches in size
• HIGH DENSITY FOAM:  Offers high density with a uniform cell structure for durability and overall insulation for your remodeling needs
• SUPERIOR FLEXIBILITY: Withstands building and material movement without compromising its seal
• STRONG ADHESION:  Sealant bonds to most building materials like wood, concrete, brick, stone, metal, pvc, and more
• UV RESISTANCE: Withstands harsh UV rays for long lasting results

User questions & answers

Question:	Do you have to apply holding can upside down
Answer:	I don't think so ... it has a tube that you attach to the nozzle to direct the spray. It's not as easy to apply as the video shows. Some practice is required. Wear gloves when using the product. It's super sticky ... took several days to peel it off his fingers ;)
Question:	Does this product come with a built in despenser
Answer:	Screw on descender. Basically one time use from what I can tell. Not a ton of product in each can
Question:	Can sparkle or plaster be applied over this
Answer:	It can be cut, sanded, or refinished.
Question:	Can i apply this on a hot surface like car exhaust? Doesn't it catch fire
Answer:	I would bet that it is very flammable.

Product description

LOCTITE TITE FOAM Gaps & Cracks (1988753) is a new generation of polyurethane-based insulating foam sealant. It expands to fill, seal, and effectively insulate gaps and cracks up to 1 inches in size, inside and out! Loctite TITE FOAM Gaps & Cracks is a bright white color and offers Premium Durability with its high density, flexibility, strong adhesion and UV resistance. Use to seal out air, moisture and pests in basements or crawlspaces, attic hatches and plumbing, HVAC or electrical penetrations. Quick and convenient to use and apply TITE FOAM Gaps & Cracks offers an easy insulating spray foam option. It is recommended for use in both interior and exterior environments and is sandable and paintable.

• EXPANDS TO FILL: Loctite TITE FOAM Gaps & Cracks fills, seals, and insulates effectively around gaps and cracks up to 1 inches in size
• SUPERIOR FLEXIBILITY: Withstands building and material movement without compromising its seal
• STRONG ADHESION: Sealant bonds to most building materials like wood, concrete, brick, stone, metal, pvc, and more
• UV RESISTANCE: Withstands harsh UV rays for long lasting results
• STRAW APPLICATOR: For application simply use the attached straw applicator for a quick solution

User questions & answers

Question:	Can this be used indoors
Answer:	yes. a tree hit my house during 75 mph winds and the drywall and stucco came out, the weather was wrong on the internet and i have been fighting with allstate. i used this to fill in the wall on the inside, and it works great i am so grateful for it. i don't know what i would have done because i am a disabled senior citizen, it is very easy to use, jst be sure to read the directions.
Question:	Why is buying a case of 12..way more expensive than just buying 12 individual
Answer:	To find the inattentive consumers it seems..
Question:	Can you spray this can sideways? I need to spray under my kitchen cabinets to a gap between the wall and floor
Answer:	Yes you can, it’s compressed so the bottle can be turned any way you’d like.
Question:	is it waterproof? Is it sealed cell type foam
Answer:	It is water proof, and I do believe it is a closed seal cell.

Product features

Loctite TITE FOAM Insulating Foam Sealant

LOCTITE TITE FOAM Gaps & Cracks (1988753) is a new generation of polyurethane-based insulating foam sealant. It expands to fill, seal, and effectively insulate gaps and cracks up to 1 inches in size, inside and out! Loctite TITE FOAM Gaps & Cracks is a bright white color and offers Premium Durability with its high density, flexibility, strong adhesion and UV resistance. Use to seal out air, moisture and pests in basements or crawlspaces, attic hatches and plumbing, HVAC or electrical penetrations. Quick and convenient to use and apply TITE FOAM Gaps & Cracks offers an easy insulating spray foam option. It is recommended for use in both interior and exterior environments and is sandable and paintable.

Recommended For:

• Interior and exterior projects
• Most building materials including wood, metal, stone, brick and PVC
• filling gaps and cracks and sealing around wiring and plumbing penetrations, HVAC ductwork, basement and crawlspace drafts, sill plate & rim Joists, attic hatches, under baseboards, gas line penetrations and outside water faucets
• Sealing out drafts and moisture as well as keeping out pests and bugs

Not Recommended For:

• Polyethylene, polytetrafluoroethylene (PTFE)/Teflon or siliconized surfaces
• Areas that require fireproof or fire stopping materials
• UV exposed projects without protective covering

HIGH DENSITY FOAM:

Offers high density with a uniform cell structure for durability and overall insulation for your remodeling needs

SUPERIOR FLEXIBILITY:

Withstands building and material movement without compromising its seal

STRONG ADHESION:

Sealant bonds to most building materials like wood, concrete, brick, stone, metal, pvc, and more

UV RESISTANCE:

Withstands harsh UV rays for long lasting results

STEP 1:

Put on gloves

STEP 2:

Shake vigorously for 30 seconds

STEP 3

Screw straw into valve

STEP 4

Hold upside down - squeeze trigger to dispense

Product description

MULTIPURPOSE HIGH DENSITY INSULATION

Non adhesive backing;

Waterproof, weather resistance, moisture resistance and chemical resistance;

It has multiple features that make it the ideal for use in any commercial, industrial or domestic use;

It can provide an airtight seal for your windows, doors, repair vents, insulate pipes and cover leaks.



APPLICATION:

Widely used in various doors and windows, furniture, electrical cabinets, cars, speakers, toys, etc.

The foam strip also can be used in electronic products, household appliances, hardware tools, etc.

• [HIGH QUALITY] Made of comfortable environmental protection material foam non adhesive suitable for all types windows and doors installations that you don’t want to ruin with adhesive strips. Provides an excellent weather seal with good durability.
• [HIGH DENSITY FOAM STRIP] This weather strip foam is water proof, Oil resistance, buffering, resistant to corrosion, dust proof, shock-absorbing, sound proof, heat insulation and anti-skidding.
• [EASY TO INSTALL] The Neoprene sponge foam strip takes almost no time to install and requires no tools (except maybe scissors or a utility knife).
• [FOAM STRIP APPLICATIONS] Widely used in various door seal and window insulation, furniture, electrical cabinets, cars, speakers, toys, sports equipment, etc. This package includes 1 roll that measures 4 inch wide x 1/4 inch thick x 10ft long neoprene foam strip.
• [100% SATISFACTION GUARANTEE] You are protected with our 100% Guarantee for a refund. If you are not satisfied with this neoprene strip, if you return the product to us within 30 days. That’s why we care about only putting out high quality products that satisfies your needs.

User questions & answers

Question:	What's the density of this foam exactly? Pounds / cubic foot or kilograms per cubic meter
Answer:	Need seller or manufacturer to answer technical details, but it is a light foam.
Question:	Where is this product made
Answer:	Made in China
Question:	Is this non-slip? Also, is it fabric backed on one or both sides
Answer:	It's is just thin neoprene. Same on all sides. No fabric. It is definitely not slick at all, and tears very easily since it is foam. So, I guess you could call it non-slip. Not smooth. You can easily use scissors to cut or just hand tear. I use it as insulator strips between electric fencing and fence posts on a chicken and duck enclosure.
Question:	what is the heat tolerate level
Answer:	This product is thin, compressible neoprene foam. Heat tolerance depends on your performance requirements. In addition to temperature, exposure to chemicals and stress should be considered. If your application exposes it to water and sunlight under low pressure and dynamic stress, it should conservatively serve as a barrier up to 180 degrees F and possibly up to around 250 degrees F or higher. As far as physical properties, neoprene starts to smoke around 500 degrees F, but it's very unlikely that this foam will be useful to you at that temperature.

Product description

Dow FROTH-PAK Foam Insulating Sealant is a two component, quick cure polyurethane foam that fills cavities, cracks and expansion joints for insulating and air sealing. FROTH-PAK Sealant is typically used as a foam insulating sealant to fill cavities, wall and floor penetrations, cracks, and expansion joints. Chemical curing allows 2 part polyurethane foam to be dispensed, expand, and become tack free in seconds. Will skin over in 30 40 seconds and be completely cured in under 1 minute. Dow FROTH-PAK620 is great for bigger jobs and yields 620 board feet of foam. The FROTH-PAK 620 kit yields up to 620 board feet of foam (One board foot = 12"x12"x1"). Applications: FROTH-PAK Foam Sealant Kits can be used in: Stud wall cavities Rim or band joists Crawl space walls and ceilings Attic ductwork Plumbing wall pipe insulation and support.*Additional fees apply for returns due to the nature of this product

• SPECIAL NOTE! Due to state regulations, this product is not currently available for use in CA, CO, WA, NY, VT, MA, NJ. Signature required at the time of delivery.
• 🏡 GAP FILLER! Large openings that let air into a home rob homeowners of money, energy efficiency and comfort. FROTH-PAK Foam Sealant is designed to fill gaps and penetrations greater than 2 in. quickly and affordably, helping eliminate unwanted airflow throughout a home.
• 🏡 GREAT COVERAGE! FROTH-PAK 620 Sealant kit yields up to 620 board ft of foam (51.7-cubic ft). Industry-leading and customizable dispensing system helps ensure consistent flow rate, on-ratio application and complete dispensing of product. Uses include roof and wall junctions, wall and attic, electrical, mechanical and plumbing penetrations in the building envelope, bonds to wood, rigid foam, masonry, metal, drywall and more
• 🏡 QUICK CURING! Chemical curing allows 2 part polyurethane foam to be dispensed, expand, and become tack free in seconds. Will skin over in 30-40 seconds and be completely cured in under 1 minute.
• 🏡 GREAT VALUE KIT: FROTH-PAK 620 Sealant Kit comes packed with everything you will need. Each kit includes: 15 ft hose and INSTA-FLO Gun Dispenser & Hose Assembly, Cone Spray Anti-Crossover Nozzles (8 cone nozzles, 4 fan nozzles), 1 Wrench (5/8"), 1 Petroleum Jelly Packet (5 g), and 1 Operation Instruction Manual. Note: Hose and Accessories Included Inside of "A" Box.

User questions & answers

Question:	What kind of respirator do i need to get
Answer:	A chemical vapor mask.
Question:	is this good to coat mobile home roofs with
Answer:	This product is not intended to be applied to a roof. Thank you
Question:	Can I apply in multiple sessions. If so what parts are not reusable if left for several hours
Answer:	The 4 X 8 plywood above the joists have an aluminum-like foil on the underside. I need to spray 5" of foam on them to get R-30. With them being located above on a pitched roof, will this foam stick to that shiny, slick material? If not, would I have do something like staple chicken wire to the surfaces first?
Question:	Does it have to stay at a certain temperature? Delivering to Maine where it is 30-40 degreees during the day
Answer:	The Minimum Temperature for FROTH-PAK™ foam should be applied when the temperature is from 60°F to 90°F (16°C to 32°C) and, the tank contents should be at 75°F to 85°F (24°C to 29°C). FROTH-PAK™ polyurethane foam can be applied effectively in cold air temperatures or on cool work surfaces (above freezing) provided the kit contents are at 75°F to 85°F (24°C to 29°C). Storage Temperature: Store FROTH-PAK™ foam products at 75°F (24°C). Do not store at temperatures above 120°F (49°C). Thank you

Product description

Why do you choose our acoustic panels?

1. Our foam sound panels are professional studio grade acoustical treatments, is great for voice and video recording, which can enhance the sound and speech within a room.



2. These acoustics foam wedges are effective sound deadener for standing waves and flutter echoes, especially when used with our corner bass traps and corner blocks.



3. It also reduces slap-back and room ring when these soundproof panels used in medium-sized areas like isolation booths, recording booths, control rooms, and sound studios.



4. These noise absorbing panels are ideal for spot-treating production studios, practice rooms, theaters or movie theaters, and other busy and crowded places such as gyms, subways, stations, offices, schools ect.



Specification(approx):

Material: high quality foam

Dimension: 30 * 30 *2. 5cm (12"*12"*1")

Weight: 1.91kg/ 4 pounds

Color: Black



Warm Tips:

1. 1" X 12" X 12" acoustic panel studio foam wedges are 1 inch in thick and covering 1 square foot.

2. Foam will not deteriorate or fall apart over time, all that you need to do is to clean the dust after long time use.



Package Included

50 Pack Acoustic Foam Panels

• u【Eco-friendly and Safety】Made of high quality environmentally polyurethane foam, these studio foam are durable and effective, no health risks, safe to use.
• u【Noise Absorbing】Our sound foam panels can dampen and diffuse mid to low frequency sound waves inside of a room, to minimize interference, increases increasing sound clarity.
• These soundproofing foam panels come with 24 pack in the package, each tile is 1 square foot of 1 inch thick acoustic wedge, 12 pack covers an area of 12 square feet.
• u【Easy to Install】These studio sound absorbing panels can be used as acoustic cover for walls, ceilings and doors, just easily attach it with staples, nails, screws, tacks or glue.
• u【Widely Usage】Our sound dampening foam panels are great for recording studios, vocal booths, control rooms, also ideal for home theaters, professional movie theaters, concert halls and more.

User questions & answers

Question:	What is the fire spread rating on this product? What testing standard was used? Needing information for a fire safety inspection at a business
Answer:	yes, this police siren speaker comes with instructions
Question:	Will these help the acoustics in my dining room if I place them behind my framed artwork on the wall
Answer:	yes, you can try, if have any problem, pls contact us: s s l y v i a 9 7 @ g m a i l.c o m
Question:	Does it come with double side foam tape
Answer:	There is not. This will operate as a dual siren and PA. We hope this helps. Please let us know how we can assist you further.
Question:	my family is on my back about playing games at night because they can hear me talking. if i put these on my door and walls next to me will they not
Answer:	The instruction manual can be found under the product guides and documents on the Amazon product page. We have placed the link below. Let us know if you have any further questions. We will be happy to help. https://m.media-amazon.com/images/I/91Vt+1euNxL.pdf

Product description

Foam & Fill Large Gap Foam is quick and easy to use. It expands to fill holes, cracks, voids and gaps around windows, doors, pipes, outlets, vents and foundations both inside and outside. It forms an airtight, waterproof bond and seals out drafts, moisture and pests. Cured foam can be sanded, painted or stained. New 8 oz. smaller can reduces waste.

• Can be sanded, painted or stained
• Use for large gaps
• Solvent clean up
• New 8 oz. smaller can reduces waste

User questions & answers

Question:	I would like to seal a hole with electrical wires running through it. Will the pre-solid foam damage the wire insulation
Answer:	I can't imagine so, at least not most electrical wiring. I've used polyurethane foam to seal a lot of electrical holes. I've heard of the foam causing signal degredation when dry, on low-voltage wiring, but I've never had any issue.
Question:	is this fire proof
Answer:	Hi, no it is not, if you need our fire proof foam, I have posted the link for you below. Thanks! https://www.amazon.com/Red-Devil-0915-Sealant-Characteristic/dp/B00GY59RHC/ref=sr_1_2?keywords=red+devil+0915&qid=1564318468&s=gateway&sr=8-2
Question:	If I have some erosion under my walkway will this be an acceptable fill
Answer:	Likely not. The foam will certainly fill the gaps, but even once it sets, it's still pretty soft. It wouldn't provide any support. It might prevent further erosion, though
Question:	can it be used to fill cracks in old wood floors
Answer:	It expands quite a bit I would recommend the small gap stuff it doesn't expand

Product features

Red Devil Foam & Fill Large Gaps & Cracks

Quick and easy to use. Seals, bonds, and insulates, filling small holes in ceilings, floorboards, concrete or cinder block walls, and around ducts, cables, plumbing areas, and central heating pipes. Cured foam can be sanded, painted or stained. Contains no HCFCs or CFCs so it is safe for the atmosphere. Use indoors or outdoors.

Product description

This product consists of four 1ft by 1ft by 1/2"inch insulation pieces. This is Pink Panther insulation, and has a R value of 3.0. It is wrapped in construction paper to prevent damage. This foam is also great for using in crafts. This foam is moisture resistant XPS insulation. The 1ft dimensions are plus or minus a quarter of an inch.

• FOUR of 1ft by 1ft by 1/2"inch Insulation Pieces R-3.0. Great For Covering Small Places That Need More Insulation, Such As Walls, Around Windows, Or On Floors.
• Pink Panther Insulation Foam. This Insulation Is Moisture Resistant XPS Insulation Foam Board. It Does Not Crumble Into Small Pieces Like Styrofoam.
• Wrapped In Construction Paper To Prevent Damage. This Insulation Foam Is Also Very Strong And Stiff, It Is Great For Crafting, Such As Covering With Fabric To Make Homemade Bulletin Boards, Or Other Crafts That Require Stiff, Lightweight Foam Board.
• This Foam Is Very Easy To Cut With A Razor Or Hot Knife, So That You Can Shape It For Any Application.
• Notice: The 1ft Dimensions Are Plus Or Minus A Quarter Of An Inch.

User questions & answers

Question:	Is there a known cement or glue for this product
Answer:	I have used, Krylon Super Quick Grip Spray Adhesive, with good results. Just don't get the foam dripping wet with it, or else the foam will get a little soft. Thanks for your question.
Question:	is this flameable
Answer:	It will burn. It is actually cut with a hotwire cutter/ Hope this helps
Question:	Are these suitable for an outdoor chicken coop? Looking to insulate during the cold winter months
Answer:	Yes, this insulation foam is moisture resistant and doesn't give off any chemicals, so it should be fine for a chicken coop. Thanks for your question.
Question:	I have to insulate garage door, each panel is 20.5" hx50.5" wx1" d. is there any size close to this? to provide r5 or above insulation
Answer:	Probably not on Amazon but at "big box" hardware stores they sell iy in door sized sheets. You'd have to cut it down yourself. Hope it Helps.

Product description

Touch 'n Foam 4001031212 MaxFill Maximum Expanding Sealant

From the Manufacturer

In the familiar green can, this is the original Touch ’n Foam sealant formulated to fill larger gaps and voids all around the home. This super-expanding foam creates an airtight, weather-resistant bond that seals out drafts.

• 3X expansion to fill gaps greater than 1 inch wide
• Weather-resistant bond seals out drafts
• Blocks insects and other pests

User questions & answers

Question:	Is this good to use to fill huge gaps behind plaster walls? I have no insulation behind them and don't want to rip them down. To much work and mess
Answer:	I don't know how big your "huge" is, so you may need a very large number of cans. When you start one can, try to finish it immediately, since after a break the tube hardens and may not be reusable.
Question:	Can I use this for a leaky door in the winter then remove it in the Spring? Or will it permanently seal the door shut
Answer:	I have used a similar product to seal a door casing. It expanded too much and the door wouldn't close after. Use caution around doors and windows.
Question:	My application would be to water proof under sliding glass doors in a 4 seasons room to stop any leakage into the room/floor. Water proof seal
Answer:	I would not trust this product in a permanent application. I used it in a more easily-replaced application and it didn't appear to me to have the trust of longevity that I get with a silicone seal. I'm afraid it will slowly fail as with similar products of this consistency in my experience. It is easy to use, tho.
Question:	I want to use it for holes made by mice . Do you know if mice can eat it and make hole again
Answer:	the Larry St.Germain response was incorrect!! Mice will eat through most Spray Foams, get Great Stuff Pest Block Spray Foam, it is a lower expansion foam but has a very bitter tasting additive that mice and rats will not eat, I am a retailer and a user of both foams, mice definitely eat through my regular foam, replaced with Pest Block and problem solved as per Manufacturer.

• MULTI-FUNCTION WEATHERSEAL - This foam weatherstripping tape can be used as insulation, shock absorption and sound absorbing materials, and widely used in door seal, which not only helps a window air conditioner cool efficiently in the summer and helps prevent heat loss in the winter,but also for sealing out insects, and dust around window air conditioners
• HIGH RESILIENCE AIR CONDITIONER SEAL TAPE - Compressive deformation resistance, durable elasticity, the air conditioner weatherstrip can be quickly return to original shape after compress. which guarantees long-term shock protection of the parts
• SAFE FOAM MATERIAL - Soft no harmful adhesive foam strips with great flame retardant, does not pollute equipment, oil resistance, resistant to corrosion, dust proof, anti-skidding and insulating
• EASILY INSTALL FOAM INSULATION TAPE - Easy to handle, manageable, and weather stripping can be cut and conformed to a variety of shapes and sizes, making it a good foam strip for doors, windows or any place you need
• WIDELY APPLICATION - House insulator can be used as a weather-strip, as a seal around air conditioners, as a gasket and to cushion and stabilize major appliances. On cars, trucks and boats, construction sector, electronics Industry,etc

User questions & answers

Question:	Would this be comfortable if used against skin, e.g. on ski goggles
Answer:	Yes, the open-cell foam tape is pretty soft, foam seal tape also has high resilience function. Hope our answer will be helpful for you, any concerns further please contact our customer service directly, always here serving for you, thanks.
Question:	How good is it at preventing water in
Answer:	There is a ledge above my window, so water naturally does not reach the seal. Otherwise, I believe this does a good job sewing the window. Good luck!
Question:	Is the dimension truly 1”x
Answer:	Yes
Question:	Is the Black black or dark grey
Answer:	It's as black as the coal Santa will bring you this year. I preferred a lighter color but couldn't find one in this size.

Product features

Why Should You Have The Foam Seal Tape?

Cracks and gaps around windows and doors are a leading cause in high-energy costs in your home throughout the year.

These self-adhesive foam insulation tape are a great solution for sealing small gaps around doors and windows, forming a barrier against drafts and humidity, as well as dust, pollen and insects during warmer months，Say goodbye to odor, moisture, dust or other hazardous and unpleasant elements make your home more comfortable and energy efficient all year long.

Product description

Window air conditioning units can provide added comfort in the hot summer months, but can also create a gap that lets in outside air, dust, insects and pollen. Duck Brand Air Conditioner Insulating Seals are easy-to-install foam seals that close the gaps between the window A/C unit and window frame. In addition to keeping the cool air in and warm air out, they reduce noise and vibration while blocking unwanted dust, insects and pollen from entering your home. Use together with other Duck Brand weatherization products to make your home more comfortable and energy efficient all year long.

Window air conditioning units can provide added comfort in the hot summer months, but can also create a gap that lets in outside air, dust, insects and pollen. Duck Brand Air Conditioner Insulating Seals are easy-to-install foam seals that close the gaps between the window A/C unit and window frame. In addition to keeping the cool air in and warm air out, they reduce noise and vibration while blocking unwanted dust, insects and pollen from entering your home. Use together with other Duck Brand weatherization products to make your home more comfortable and energy efficient all year long.

From the Manufacturer

Protect your belongings from extreme weather with Duck Brand's Weatherization Accessories products, such as covers, seals, pipe wrap and more. By keeping your items covered when not in use, you can extend their usefulness and appearance. Duck Brand Air Conditioner Insulating Seal fits around a window air conditioning unit to seal in climate controlled air and seal out drafts, dust and insects. It is easy to install. Simply place this seal on top of the unit and lower the window to compress the seal for best insulation. It creates a weather-tight seal around your unit to keep out both winter drafts and summer humidity. Each seal measures 2-1/4 by 2-1/4 by 42-Inch. Whatever your home insulating needs, Duck Brand has what it takes to get the job done and save you money!

• Fits around a window air conditioning unit to seal in climate controlled air, seal out drafts, dust and insects
• Place on top of unit and lower window to compress seal for best insulation
• Creates a weather-tight seal to keep out winter drafts and summer humidity
• 2-1/4 by 2-1/4 by 42-Inch
• Foam seal

User questions & answers

Question:	Does this include an adhesive strip
Answer:	It is literally double-sided tape.
Question:	does anyone know whether this is rubber
Answer:	It's a porous foam strip. Not sure of the exact chemical compound that it's made of. This is good to stuff into the gaps.
Question:	My windows do not close properly, what can I use to keep in the air from my AC unit
Answer:	We're using THIS particular product in a kennel after a dog chewed open one of the original side slats. It comes with 2 plastic frames-holders - one fits against the side of the AC unit and the other against the window frame. We cut them down to size and then cut the foam to fit - easy. We then used ALL WEATHER DUCT tape to secure them on both sides. It's neat, but not necessarily aesthetically pleasing - the dogs, however, do not mind. The foam is fairly thick and of good quality. There's an overhang over the window opening the AC unit is housed in to keep rain out, so the foam doesn't get wet. We'd been thinking of covering the exterior portion with plastic - having a piece cut to fit is about $25. BUT, I'm thinking of just cutting down a plastic cutting mat, such as those used for baking. They're much less expensive and would be easy to cut to fit, then tape in place.
Question:	How and where do you insert it
Answer:	Insert it behind the top of your lower window, after it has been raised, and the air conditioner is solidly in place. That lower window will now be 3/4 or so raised, and there will be a gap behind the top of the frame, where the upper window glass is behind it. To insert, fold the foam in half, and put that middle spot against the middle of the gap behind the top of your lower window. Then extend each half of the foam out to it's side of the window, press it in at the far side of the window, and then work back to the middle, pressing it down into the gap. This will bunch it up some (instead of cutting the foam to length). The foam is quite tolerant of being squished, and should be a bit more effective with more compression. Or, if you prefer, cut the foam to length (it's easy with scissors, a steak knife, or most anything sharp), and then simply press the length of foam down into the length of gap behind the top of the lower window. Some people apparently also use this foam on top of the air conditioner, to seal where the window comes down against it. I suppose that can be done, but there is adhesive backed foam weatherstripping which isn't nearly as thick, and can be permanently applied to the bottom of the window or the top of the air conditioner. The bottom of the window and the top of the air conditioner should both be pretty flat, so a 2-1/4" high piece of foam seems like overkill for any slight gaps that need to be filled where the window meets the air conditioner.

Product features

Duck Brand Solutions For Air Conditioner Insulation

Properly sealing and insulation your home can be an easy way to increase comfort, save money on energy costs and increase home energy efficiency. Duck Brand offers a variety of solutions to keep cold air inside your house and the heat and humidty out during the warm summer months. Text "WEATHER" to 84444 for project guides, instructional videos and more.

Window Air Conditioner Replacement Filter

Washable, reusable and versatile, this replacement filter helps to remove dust and pollen from the air to increase comfort in your home.

Air Conditioner Insulating Panels

Insulate around your AC unit to keep cool air in during the summer & out during the winter. Easy to use.

Air Conditioner Insulation Seal

This easy-to-install foam seal closes the gaps between the window A/C unit and window frame, keeping outside air, insects and dust out.

Premium Air Conditioner Insulation Seal

This high-density foam seal fits around most A/C units to keep winter and summer drafts from entering your home.

Product description

FROTH-PAK 650 is a Class A fire rated spray foam insulation kits are complete portable two part polyurethane spray foam systems. FROTH-PAK polyurethane foam is a two-component, quick cure, closed cell foam that fills cavities, cracks and expansion joints for insulation and air sealing. Air infiltration accounts for 25%-40% of a home's energy loss, FROTH-PAK stops that energy loss. FROTH-PAK Foam Insulation kits can be used to insulate stud wall cavities up to 2" thick, cold floors above unheated areas, crawl spaces, attic walls, and ceilings when covered with a code-approved barrier. The kit can be restarted and reused for up to 30 days after first startup. The FROTH-PAK 650 kit yields up to 650 board feet of foam. The FROTH-PAK 650 kit yields up to 650 board feet of foam (One board foot = 12"x12"x1"), 1.75 foam density. Includes Part A Tank - Isocyanate Part B Tank - Polyol, 15 Ft Hose Insta-Flo Gun dispenser & Hose Assembly, 1 Wrench (5/8") 1 Petroleum Jelly Packet (5g), 1 Operation Instruction Manual*Additional fees apply for returns due to the nature of this product

• SPECIAL NOTE! Due to state regulations, this product is not currently available for use in CA, CO, WA, NY, VT, MA, NJ. Signature required at the time of delivery.
• 🏡 GAP FILLER! Large openings that let air into a home rob homeowners of money, energy efficiency and comfort. FROTH-PAK Foam Sealant is designed to fill gaps and penetrations greater than 2 in. quickly and affordably, helping eliminate unwanted airflow throughout a home.
• 🏡 GREAT COVERAGE! FROTH-PAK 650 Sealant kit yields up to 650 board ft of foam (54.1-cubic ft). Industry-leading and customizable dispensing system helps ensure consistent flow rate, on-ratio application and complete dispensing of product. Uses include roof and wall junctions, wall and attic, electrical, mechanical and plumbing penetrations in the building envelope, bonds to wood, rigid foam, masonry, metal, drywall and more.
• 🏡 QUICK CURING! Chemical curing allows 2 part polyurethane foam to be dispensed, expand, and become tack free in seconds. Will skin over in 30-40 seconds and be completely cured in under 1 minute.
• 🏡 GREAT VALUE KIT: FROTH-PAK 650 Sealant Kit comes packed with everything you will need. Each kit includes: 15 ft hose and INSTA-FLO Gun Dispenser & Hose Assembly, Cone Spray Anti-Crossover Nozzles (8 cone nozzles, 4 fan nozzles), 1 Wrench (5/8"), 1 Petroleum Jelly Packet (5 g), and 1 Operation Instruction Manual. Note: Hose and Accessories Included Inside of "A" Box.

User questions & answers

Question:	Is the only difference between the 650 and the 620, square footage? Or this the product different
Answer:	The Froth Pak 650 is a Class A Fire Rated Insulation whereas the 620 is a Sealant. As far as square footage goes the 650 covers 650 square feet at 1 inch of foam and the 620 covers 620 square feet at 1 inch of foam.
Question:	Would this product be good for copper water lines and crawl space foundation walls
Answer:	I used it to encapsulate a crawlspace it will stick to anything
Question:	Kit covers 1300sqft? (2) Is 1" the spray thickness or the final thickness? How much it expands? (3) Could be sprayed to 6" final thickness
Answer:	1)Yes (2)1" This is a minimal expanding foam. It expands approximately 3/4" (3) You can spray this up to 6" thick and it will hold, but Dow only rates this product to give a max R value of 13.2 at 2"
Question:	Can this product be sprayed with canisters upside down or on their sides
Answer:	I am not sure about upside down, but I have used it with the canister on its side.