12 best exhaust fan for garages

• Widely Usage: This VENTISOL 12 " Exhaust Fan is a powerful fan that can be ventilated in garages, gardens, attics,barns, greenhouses, basements and a variety of other locations where needs to transfer the superior airflow for cooling and ventilation.
• Variable Speed: Separately with a variable speed controller in package, can adjust fan speeds to customize your comfort.
• Easy Installation: No plug, No power cord, it’s a hard-wired connection, just wiring to your building’s electrical system.
• Longer Life-time: Powder coating in black, constructed from galvanized steel frame, 3 aluminum shutter blades, fully enclosed ball bearing motor, provided 1 year warranty. Built-in shutter mechanism, self-closing shutters protect the fan from rain and snow when not in operation. It’s suitable for ventilating a building to the outside.
• Powerful & Efficient: The 12-inch runs on standard 120 volts at 70W, 0.57 amps, with 1680rpm, 9.5m/s, cooling and ventilating an area of 1450 cubic feet per minute,with ETL safety listed.

User questions & answers

Question:	Can put a plug on it or does it have to be wired directly
Answer:	This ventilation fan is wired-installation, it can be put a plug if you are convenience.
Question:	What is the hole dimensions or rough opening size
Answer:	Height and width are less than 12.5” each. I cut a 13x13 opening to make room for J-channels on the siding outside the opening.
Question:	I would like to know how many cfm the 12" fan can move
Answer:	1450 CFM
Question:	Temperature range
Answer:	Doesnt come with a tsat

Product features

Speed Controller

With a separately Variable Speed Controller, make it easy to adjust the speed of the ventilation fans to your requirement. Save energy and control the noise levels of the ventilation fans.

• Range from 70% to 100%
• Start by turning the knob to High and gradually decrease the power to you desired power level.When finished,turn knob back to OFF.
• If the speed controller is not connected, the exhaust fan will run at maximum speed.

Automatic Shutters

This wall mounted exhaust fan features a galvanized-steel shutter, rear grille, aluminium impeller. The automatic shutters open and close in conjunction with the operation of the fan.

Powerful Motor

Ball bearing motor, longer service life. High-airflow exhaust fan designed to ventilate our heat, moisture, odor and dust from various places, such as the greenhouses, attic, sheds, etc. With 1680rpm, 9.5m/s, cooling and ventilating an area of 1450 cubic feet per minute.

Easy Installation

Bare leads for custom application, black line to switch, white to neutral. With a detailed instructions in the package for reference.

Greenhouse

Attic

Shed

Product description

iLiving - Wall Mount Shutter Exhaust Fan Are you looking for a reliable way to reduce your cooling costs while keeping your home cooler and more comfortable year-round? If so, you have found just what you're looking for! Made with top quality materials, craftsmanship and engineering, the iLiving Shutter Exhaust Fan is designed to offer superior ventilation in any space you choose to install to keep your living space cooler and more comfortable year-round while reducing expensive cooling bills. •Heavy-Duty, Galvanized Steel Frame •Weather Resistant Aluminum Shutters and Blades •Motion-Balanced for Quiet Operation •Thermally Protected and Permanently Lubricated Motor •Automatic Shutters •For Home Cooling and Ventilation •Corrosion-Resistant Wire Guards •Variable Speed Setting Functionality On Select Sizes (controller sold separately) •UL Listed •Available in (8 or 9) Size Variations Perfect Cooling and Ventilation Solution For •Homes •Attics •Garages •Sheds •Reducing Cooling Costs •And More The fan comes fully assembled out of the box; only installation required is the electrical hardwiring. The shutter fan comes in 8 different sizes: 10 inches, 12 inches, 16 inches, 18 inches, 20 inches, 24 inches, 30 inches, and 36 inches. The 18-inch shutter fan has both a variable Speed ILG8SF24V and a Single Speed model. The iLIVING 30-inch and 36-inch shutter fans are only available in single Speed. For variable-speed models, the iLIVING ILG8SFSC Speed controller is sold separately.

• CUT COOLING COSTS: Reduce expensive cooling bills at home. Ready to install, our wall-mounted automatic shutter vent fan is designed to help to keep your living space cooler and more comfortable year-round.
• MULTIPURPOSE: Perfect cooling and ventilation solution for any space at your home - including the attic, garage, shed, and more. Corrosion-resistant, the fully enclosed motor is thermally protected and permanently lubricated for easy maintenance.
• VARIABLE SPEED: Customize your comfort. iLiving Exhaust Fan has adjustable speed functionality when combined with the iLIVING ILG8SFSC speed controller (sold separately).
• WEATHER RESISTANT SHUTTERS: Constructed from durable, high-grade aluminum, these shutters can withstand moisture and heatlonger than other competitors’ products adding to the fan’s longevity.
• POWERFUL AND EFFICIENT: Small but mighty, you’ll enjoy the power and efficiency of iLiving’s Shutter Exhaust Fan. The 16-inch runs on standard 120 volts at 1/20 HP, 0.83 amps with 1580 rotations per minute, cooling and ventilating an area of 1200 cubic feet per minute!

Product description

The power shutter exhaust fan is perfect for removing excess heat, moisture, and unpleasant odors from virtually any commercial location, including restaurants, factories, warehouses, barns, and greenhouses. This fan features aluminium blades, automatic shutters that open and close in tandem with the operation of the fan. The completely enclosed motor is thermally protected and permanently lubricated. The fan comes fully assembled out of the box; only installation required is the electrical hardwire.

• APPLICATIONS: This 12 inch shutter/exhaust fan with automatic Shutters can help replace your ac unit by cooling your garage, attic, greenhouse shop or chicken coop.
• INSTALLATION: Can easily be added to a window opening or opening in the wall along with a thermostat to optimize cooling.
• COOLIN AND GVENTILATION: This industrial grade shutter fan can solve all of your cooling and ventilation needs. Wattage (watts):65
• RUST PROOF ALUMINUM SHUTTERS: This shutter fan is made with corrosion resistant aluminium shutters and blades. This provides longevity to the fan and will prevent any rust from forming.
• 120 Volts, 60W, 0. 52A, 1620RPM, 940CFM

User questions & answers

Question:	Is the motor brushed or brushless
Answer:	Brushless
Question:	Can this unit be used as a range hood exhaust
Answer:	It's not built as range hood exhaust, however, you can install in the window opening and vent out any smoke or smell in the kitchen. The fan circulate the air well especially if you have another window besides the window that you install the fan. If you own your own home, you could possibly make a wall opening for the fan.
Question:	Does it comes with the thermostat
Answer:	no
Question:	I was thinking about using this fan as an exhaust for my welder. Would this be a good idea
Answer:	Like how? It will clear out a small room or shed. There wouldn’t be any flammable fumes from welding like painting.

Product features

iPower 12 Inch Shutter Exhaust Fan

iPower 12 Inch Shutter Exhaust Fan is perfect for removing excess heat, moisture, dust and odors from virtually any residential or commercial space. Applications include: workshops, welding rooms, factories, warehouses, barns, and greenhouses.This wall mounted exhaust fan includes automatic gravity shutters that open and close in conjunction with the operation of the fan. The completely enclosed motor is thermally protected and permanently lubricated.This fan comes fully assembled and ready to install out of the box.

• Rotating Speed：1620 RPM
• Air volume：940 CFM
• Wind Speed: 10.5M/S
• Watts : 60W
• Voltage: 115V/60Hz

Product description

GRELWT - Wall Mounted Shutter Exhaust Fan Are you looking for a reliable way to reduce your cooling costs while keeping your home cooler and more comfortable year-round? If so, you’ve found just what you’re looking for! Made with top quality materials, craftsmanship and engineering, the GRELWT Shutter Exhaust Fan is designed to offer superior ventilation in any space you choose to install. By removing excess heat and moisture our exhaust fan keeps your living space cooler and more comfortable year-round while reducing expensive cooling bills. Heavy-Duty, Galvanized Steel Frame Weather Resistant Aluminum Shutters and Blades Motion-Balanced for Quiet Operation Thermally Protected and Permanently Lubricated Motor Automatic Shutters For Home Cooling and Ventilation

• 🍀CUT COOLING COSTS: Reduce expensive cooling bills at home. Ready to install, our greenhouse exhaust fan is designed to help remove excess heat and moisture keeps your living space cooler and more comfortable year-round.
• 🍀MULTIPURPOSE: Perfect cooling and ventilation solution for any space at your home - including the greenhouse , attic, garage, and more. the fully enclosed motor is thermally protected and permanently lubricated for easy maintenance.
• 🍀WEATHER RESISTANT SHUTTERS: these shutters are made of durable galvanized steel, which prevents the formation of rust，thereby adding the life of the fan.
• 🍀POWERFUL AND EFFICIENT: Small but mighty, you’ll enjoy the power and efficiency of GRELWT’s Shutter Exhaust Fan. The 24-inch runs on standard 120 volts at 1/3 HP, 2.65 amps with 1400 rotations per minute, cooling and ventilating an area of 5600 cubic feet per minute!
• 🍀EXHAUST FAN WARRANTY: The housing is made of galvanized steel which prevents rust. This heavy duty exhaust fan has 1 year limited warranty. The shutters open and close automatically. Fans do not come with electrical plugs. Requires wiring to your building's electrical system.

Product description

Shutter mounted exhaust fans are widely used for ventilating stores, offices, factories, shops and farm buildings. They exhaust when needed and then the shutter automatically closes to stop infiltration of air when the fans are not operating. 60 Day

• 12 inch
• Made with moisture resistant plastic and painted shutter
• Easily to install with power cord included
• Great for ventilation of small rooms and buildings
• Shipped fully assembled

User questions & answers

Question:	Can a variable speed control be hooked up to this fan
Answer:	Yes. You can use the Tjernlund SCP plug-in speed control with this.
Question:	what are the dimentions of this product (lenght/width at the widest
Answer:	Inside plastic framing is 13 5/8" by 13 5/8". The exterior part is metal and is 11 1/2" by 11 1/2". The depth of the interior plastic frame is 2". The depth of the metal exterior part is 3 1/4". It comes with 4 screws to secure the metal frame to the wall.
Question:	Do you need outside shutters to keep the rain out
Answer:	I have a south facing window for my fan and the rain usually comes from that direction (I am just north of Seattle). I have had no problems with rain coming through with the shutters that came with the fan.
Question:	how many sones is this fan
Answer:	I don't know the sones, but the decibel rating is either accurate, or overstated, because these particular shutter fans are very quiet for the amount of air they move. They don't have the "roar" or hum that other small exhaust fans have, just a low air-whoosh sound. The shutters are spring assisted so they do not make any rattling noise either.

Product description

iLiving - Wall-Mounted Shutter Exhaust Fan



Are you looking for a reliable way to reduce your cooling costs while keeping your home cooler and more comfortable year-round? If so, you’ve found just what you’re looking for!



Made with top quality materials, craftsmanship and engineering, the iLiving Shutter Exhaust Fan is designed to offer superior ventilation in any space you choose to install to keep your living space cooler and more comfortable year-round while reducing expensive cooling bills.

•Heavy-Duty, Galvanized Steel Frame

•Weather Resistant Aluminum Shutters and Blades

•Motion-Balanced for Quiet Operation

•Thermally Protected and Permanently Lubricated Motor

•Automatic Shutters

•For Home Cooling and Ventilation

•Corrosion-Resistant Wire Guards

•Variable Speed Setting Functionality On Select Sizes (controller sold separately)

•UL Listed

•Available in (8 or 9) Size Variations



Perfect Cooling and Ventilation Solution For

•Homes

•Attics

•Garages

•Sheds

•Reducing Cooling Costs

•And More



The fan comes fully assembled out of the box; only installation required is the electrical hardwiring. The shutter fan comes in 8 different sizes: 10 inches, 12 inches, 16 inches, 18 inches, 20 inches, 24 inches, 30 inches, and 36 inches. The 18-inch shutter fan has both a variable Speed ILG8SF24V and a Single Speed model. The iLIVING 30-inch and 36-inch shutter fans are only available in single Speed. For variable-speed models, the iLIVING ILG8SFSC Speed controller is sold separately.

• "CUT COOLING COSTS: Reduce expensive cooling bills at home. Ready to install, our wall-mounted automatic shutter vent fan is designed to help keep your living space cooler and more comfortable year-round."
• MULTIPURPOSE: Perfect cooling and ventilation solution for any space at your home - including the attic, garage, shed, and more. Corrosion-resistant, the fully enclosed motor is thermally protected and permanently lubricated for easy maintenance.
• VARIABLE SPEED: Customize your comfort. iLiving Exhaust Fan has adjustable speed functionality when combined with the iLIVING ILG8SFSC speed controller (sold separately).
• WEATHER RESISTANT SHUTTERS: Constructed from durable, high-grade aluminum, these shutters can withstand moisture and heat longer than other competitors’ products adding to the fan’s longevity.
• POWERFUL AND EFFICIENT: Small but mighty, you’ll enjoy the power and efficiency of iLiving’s Shutter Exhaust Fan. The 24-inch runs on standard 120 volts at 1/4 HP, 2.65 amps with 1050 rotations per minute, cooling and ventilating an area of 4244 cubic feet per minute!

User questions & answers

Question:	I am looking at the 24" variable speed model to get heat out of the garage. Can I use an existing 3-speed (ceiling) fan switch to control this unit
Answer:	It is likely not rated for enough amperage and some ceiling fan switches have 4 wires and some have 3
Question:	Is this fan suitable for use in a greehouse
Answer:	It’s an exhaust fan so if your looking to pull the hot air out then I would think you could use it in a green house.
Question:	Can the louvers be mounted on the air intake side of the fan
Answer:	Do you need an intake fan instead of exhaust air out? If so, we do not make one at the moment.
Question:	rough opening size for the 24" fan
Answer:	I installed a 24” fan using a 24 1/2” x 24 1/2” rough opening. 24 1/4” would do it but to be safe I went a little larger.

• A high-airflow exhaust fan designed to ventilate out heat, moisture, odor, and dust from various spaces.
• Programmable controller with corded probe, can adjust fan speeds in response to temperatures and humidity.
• Innovative EC-motor with PWM-control maximizes airflow while reducing energy consumption and noise levels.
• Features galvanized-steel shutters, aluminum blades, and IP-44 rated to be highly resistant to liquid and dust.
• Fan Size: 10” | Dimensions: 13.0 x 13.0 x 5.9 in. | Airflow: 1014 CFM | Noise: 58 dBA | Bearings: Dual Ball

User questions & answers

Question:	When will you have this back in stock
Answer:	I just ordered it
Question:	Is this product UL safety certified
Answer:	yes
Question:	How can you cut a hole in siding to install without J Chanel for water penatetration
Answer:	I cut a hole in the side of my shed, and finished it off with with molding and caulk around the outside.
Question:	what are the dimensions of the exterior shutter box (LxWxD
Answer:	From the product specs: Fan Size: 10” | Dimensions: 13.0 x 13.0 x 5.9 in. | Airflow: 1014 CFM | Noise: 58 dBA | Bearings: Dual Ball

Product features

A Smarter and More Energy-Efficient Shutter Fan

The new AIRLIFT series contains a cutting-edge Electronically Commutated (EC) motor, controlled using precise electronic pulses and smart programming. This enables the exhaust fan to increase its speed to boost airflow at a lower noise level. The EC motor is also twice as energy efficient as AC-motors and can save up to 40% in energy costs, paying for itself in the long run.

Smart Programming

The controller adjusts airflow in response to temperature and humidity. Also features speed control, timer, alarms, and backup memory.

Efficient PWM EC-Motor

Each system utilizes a EC-motor that is controlled using Pulse Width Modulation (PWM), which has a higher performance and energy efficiency.

Weather-Proof Construction

Features a galvanized-steel shutter, rear grille, and aluminium impeller. Rated IP-44 to be dust and water resistant for various weather conditions.

Plug and Play

Complete kit includes the fan unit, user manual, corded sensor probe, and everything needed to mount the system and power it through an outlet.

Product description

The power shutter exhaust fan is perfect for removing excess heat moisture and unpleasant odors from virtually any commercial location including restaurants factories warehouses barns and greenhouses This fan features aluminium blades automatic shutters that open and close in tandem with the operation of the fan The completely enclosed motor is thermally protected and permanently lubricated The fan comes fully assembled out of the box only installation required is the electrical hardwire

• APPLICATIONS This 12 inch shutter/exhaust fan with automatic Shutters can help replace your ac unit by cooling your garage attic greenhouse shop or chicken coop Can easily be added to a window opening or opening in the wall along with a Speed Controller to optimize cooling
• Shutter Exhaust Fan 120 Volts 63W 0. 52A 1620RPM 940CFM
• Fan Speed Controller iPower Fan Speed Controller will correctly and precisely adjust the speed of your Shutter Exhaust Fan Durable 3-Pole Grounded Plug Construction No Extra Wires to Deal With
• Multiple Speed One control switch for 3 Variable Speed settings OFF HIGH MED LOW
• Power Cord Kit This Power Cord Kit is easy to install & includes a 3-foot strain relief clamp wire connectors & installation instructions Simplify installation of your Ventilation Fan with this easy to use power cord kit Universal extension cord power kit works

User questions & answers

Question:	Can this fan be installed in the ceiling
Answer:	Yes, I installed in a 16 inch opening that used to be a swamp cooler, with a weather proof bell on the roof. The vents open more than 1/2 way on high speed and it draws air in from any windows I open. It is not any noisier than a room fan, T.V. & conversations are easily heard. I do not use the speed controller, just installed a plug in the shaft and use an Alexa receptacle to turn off & on. 2x4 frame & long screws keep it secure & vibration free.
Question:	can two of these fans be wired to a single power cord and run properly
Answer:	The mfgr. specs say that this fan draws 1/5 amp when on. So wiring 2 fans to any 15 amp circuit/breaker is fine. I have 2 of these wired to one single 15 amp breaker /wire or power cord.
Question:	what direction does the air flow? Does it flow in through the shutters or out through the shutters
Answer:	Air flow go’s out through the shutters very powerful if you get it with the speed control works amazingly great
Question:	I was thinking about an indoor application: is it very loud on the higher speed setting
Answer:	"loud" is hard to quantify. I'm using this as a window fan, and I'd rate it a little less noise than the typical 20" box fan on high. However, it moves much more air than the box fan. The speed controller that comes with the fan will make *more* noise because it causes the motor windings to ring. I find it very annoying and prefer to run the fan without the control. Mounting the fan using isolating rubber washers so that there is no direct contact between the fan and the mount helps to reduce the noise transmitted by vibration to the window frame. It's best to mount it to a material such as MDF or melamine-covered MDF instead of plywood or OSB, because MDF is better at damping vibrations--the reason why it's used in speaker enclosures instead of plywood.

Product features

iPower 12 Inch Shutter Exhaust Fan

iPower 12 Inch Shutter Exhaust Fan is perfect for removing excess heat, moisture, dust and odors from virtually any residential or commercial space. Applications include: workshops, welding rooms, factories, warehouses, barns, and greenhouses.This wall mounted exhaust fan includes automatic gravity shutters that open and close in conjunction with the operation of the fan. The completely enclosed motor is thermally protected and permanently lubricated.This fan comes fully assembled and ready to install out of the box.

• Rotating Speed：1620 RPM
• Air volume：940 CFM
• Wind Speed: 10.5M/S
• Watts : 63W
• Voltage: 120V/60Hz
• Speed Controller and Power Cord Kit Included

Product description

The JPOWER shutter exhaust fan is perfect for removing excess heat, moisture, and unpleasant odors from virtually any commercial location, including restaurants, factories, warehouses, barns, and greenhouses. This fan features aluminum blades, OSHA compliant wire guards, and automatic shutters that open and close in tandem with the operation of the fan. The completely enclosed motor is thermally protected and permanently lubricated.

• APPLICATIONS: This 12 inch shutter/exhaust fan with automatic Shutters can help replace your ac unit by cooling your garage, attic, greenhouse shop or chicken coop.
• INSTALLATION: Can easily be added to a window opening or opening in the wall along with a thermostat to optimize cooling.
• COOLING AND VENTILATION: This industrial grade shutter fan can solve all of your cooling and ventilation needs.
• RUST PROOF ALUMINUM SHUTTERS: This shutter fan is made with corrosion resistant aluminum shutters and blades. This provides longevity to the fan and will prevent any rust from forming.
• 120 Volts, 63W, 0.52A,1750 rpm, 11M/S, 1800CFM

User questions & answers

Question:	Since not all studs are 16 inches apart, what is the required stud spacing required for mounting
Answer:	The studs above my garage are greater than 16", so I mounted flush with the plywood and it is light enough that it doesn't seem like it will damage the integrity of the wood. I did use a piece of plumbing strap across the back to help secure it as well as preventing minor vibration.
Question:	The description says shutter exhaust fan wall-mounted stainless . what part is stainless?? and what does upgraded version mean
Answer:	Stainless fan shutters that open when fan is on and shut when it turns off. Don't know what upgraded is.
Question:	How many watts does this run at
Answer:	The exhaust fan runs at 120 Volts, 63W.
Question:	Does the fan have a cord and on and off switch
Answer:	You definitely want to wire this through a thermostat or a single pole light switch.

Product description

iLiving - Wall-Mounted Shutter Exhaust Fan With Thermostat Control Are you looking for a reliable way to reduce your cooling costs while keeping your home cooler and more comfortable year-round? If so, you’ve found just what you’re looking for! Made with top quality materials, craftsmanship and engineering, the iLiving Shutter Exhaust Fan is designed to offer superior ventilation in any space you choose to install to keep your living space cooler and more comfortable year-round while reducing expensive cooling bills. • Heavy-Duty, Galvanized Steel Frame. • Weather Resistant Aluminum Shutters and Blades. • Motion-Balanced for Quiet Operation. • Thermally Protected and Permanently Lubricated Motor. • Automatic Shutters. • For Home Cooling and Ventilation. • Corrosion-Resistant Wire Guards. • Variable Speed Setting Functionality With Built in Thermostat Control. • UL Listed. • Available in 8 Size Variations. Perfect Cooling and Ventilation Solution For : • Homes , • Attics , • Garages , • Sheds , • Regulating Room Temperature , • Reducing Cooling Costs , • And More. The fan comes fully assembled out of the box; easy installation when plugged into an approved electrical outlet. The shutter fan comes in 8 different sizes: 10 inches, 12 inches, 14 inches, 16 inches, 18 inches, 20 inches, 24 inches and 30 inches.

• CUT COOLING COSTS: Reduce expensive cooling bills at home. Ready to install, our wall-mounted automatic shutter vent fan is designed to help keep your living space cooler and more comfortable year-round.
• MULTIPURPOSE: Perfect cooling and ventilation solution for any space at your home - including the attic, garage, shed, and more. Corrosion-resistant, the fully enclosed motor is thermally protected and permanently lubricated for easy maintenance.
• THERMOSTAT CONTROL: Customize your comfort. iLiving Exhaust Fan features 3-speeds and built-in thermostat control to help regulate room temperature within a range of 32-130 °F.
• WEATHER RESISTANT SHUTTERS: Constructed from durable, high-grade aluminum, these shutters can withstand moisture and heat longer than other competitors’ products adding to the fan’s longevity.
• EASY INSTALLATION: Simple, electrician free installation when plugged into an approved electrical outlet. Box includes 6 ft cord, standard 3-prong plug, and AC cable.

Product description

iLiving - Wall Mounted Shutter Exhaust Fan



Are you looking for a reliable way to reduce your cooling costs while keeping your home cooler and more comfortable year-round? If so, you’ve found just what you’re looking for!



Made with top quality materials, craftsmanship and engineering, the iLiving Shutter Exhaust Fan is designed to offer superior ventilation in any space you choose to install to keep your living space cooler and more comfortable year-round while reducing expensive cooling bills.

• Heavy-Duty, Galvanized Steel Frame

• Weather Resistant Aluminum Shutters and Blades

• Motion-Balanced for Quiet Operation

• Thermally Protected and Permanently Lubricated Motor

• Automatic Shutters

• For Home Cooling and Ventilation

• Corrosion-Resistant Wire Guards

• Variable Speed Setting Functionality On Select Sizes (controller sold separately)

• UL Listed

• Available in (8 or 9) Size Variations



Perfect Cooling and Ventilation Solution For

• Homes

• Attics

• Garages

• Sheds

• Reducing Cooling Costs

• And More



The fan comes fully assembled out of the box; only installation required is the electrical hardwiring. The shutter fan comes in 8 different sizes: 10 inches, 12 inches, 16 inches, 18 inches, 20 inches, 24 inches, 30 inches, and 36 inches. The 18-inch shutter fan has both a variable Speed ILG8SF24V and a Single Speed model. The iLIVING 30-inch and 36-inch shutter fans are only available in single Speed. For variable-speed models, the iLIVING ILG8SFSC Speed controller is sold separately.

• "CUT COOLING COSTS: Reduce expensive cooling bills at home. Ready to install, our wall-mounted automatic shutter vent fan is designed to help keep your living space cooler and more comfortable year-round."
• MULTIPURPOSE: Perfect cooling and ventilation solution for any space at your home - including the attic, garage, shed, and more.Corrosion-resistant, the fully enclosed motor is thermally protected and permanently lubricated for easy maintenance.
• VARIABLE SPEED: Customize your comfort. iLiving Exhaust Fan has adjustable speed functionality when combined with the iLIVINGILG8SFSC speed controller (sold separately).
• WEATHER RESISTANT SHUTTERS: Constructed from durable, high-grade aluminum, these shutters can withstand moisture and heat longer than other competitors’ products adding to the fan’s longevity.
• POWERFUL AND EFFICIENT: Small but mighty, you’ll enjoy the power and efficiency of iLiving’s Shutter Exhaust Fan. The 20-inch runs onstandard 120 volts at 1/4 HP, 2.59 amps with 1075 rotations per minute, cooling and ventilating an area of 3368 cubic feet per minute!

Product description

iLiving - Wall-Mounted Shutter Exhaust Fan Are you looking for a reliable way to reduce your cooling costs while keeping your home cooler and more comfortable year-round? If so, you’ve found just what you’re looking for! Made with top quality materials, craftsmanship and engineering, the iLiving Shutter Exhaust Fan is designed to offer superior ventilation in any space you choose to install to keep your living space cooler and more comfortable year-round while reducing expensive cooling bills. •Heavy-Duty, Galvanized Steel Frame •Weather Resistant Aluminum Shutters and Blades •Motion-Balanced for Quiet Operation •Thermally Protected and Permanently Lubricated Motor •Automatic Shutters •For Home Cooling and Ventilation •Corrosion-Resistant Wire Guards •Variable Speed Setting Functionality On Select Sizes (controller sold separately) •UL Listed •Available in (8 or 9) Size Variations Perfect Cooling and Ventilation Solution For •Homes •Attics •Garages •Sheds •Reducing Cooling Costs •And More The fan comes fully assembled out of the box; only installation required is the electrical hardwiring. The shutter fan comes in 8 different sizes: 10 inches, 12 inches, 16 inches, 18 inches, 20 inches, 24 inches, 30 inches, and 36 inches. The 18-inch shutter fan has both a variable Speed ILG8SF24V and a Single Speed model. The iLIVING 30-inch and 36-inch shutter fans are only available in single Speed. For variable-speed models, the iLIVING ILG8SFSC Speed controller is sold separately.

• "CUT COOLING COSTS: Reduce expensive cooling bills at home. Ready to install, our wall-mounted automatic shutter vent fan is designed to help keep your living space cooler and more comfortable year-round."
• MULTIPURPOSE: Perfect cooling and ventilation solution for any space at your home - including the attic, garage, shed, and more.Corrosion-resistant, the fully enclosed motor is thermally protected and permanently lubricated for easy maintenance.
• VARIABLE SPEED: Customize your comfort. iLiving Exhaust Fan has adjustable speed functionality when combined with the iLIVING ILG8SFSC speed controller (sold separately).
• WEATHER RESISTANT SHUTTERS: Constructed from durable, high-grade aluminum, these shutters can withstand moisture and heat longer than other competitors’ products adding to the fan’s longevity.
• POWERFUL AND EFFICIENT: Small but mighty, you’ll enjoy the power and efficiency of iLiving’s Shutter Exhaust Fan. The 18-inch runs on standard 120 volts at 1/15 HP, 0.90 amps with 1070 rotations per minute, cooling and ventilating an area of 1736 cubic feet per minute!