12 best garage door remotes

Product description

Before purchase, please check your garage door opener

This aftermarket replacement remote ONLY works with Purple, Red or Orange Learn Button Button LiftMaster / Chamberlain / Sears Craftsman / Raynor / AccessMaster brand garage door opener (hanging in your garage) made around 1997-2014 that features Security 315 MHz or 390 MHz technology.

Or you can check if your remote control's model number is listed below

Security 315 MHz (Purple learn button openers) remotes model below

LiftMaster: 355LM, 365LM, 370LM, 371LM, 371LMC, 372LM, 372LMC, 373LM, 373LMC, 373P, 373W, 374LM, 374LMC, 376LM, 377LM, 377LMC, 378LM, 398LM and 41A6127-1

Chamberlain: 41A6318, 940D, 940CD, 950D, 950CD, 953D, 953CD, 956D, 956CD

Sears Craftsman: 139.18191, 139.18192, 139.53752, 139.53753, 139.53754

AccessMaster: 371AC, 373AC and 377LG

Do It: 940DID and 953DID

Raynor: 371RGD, 372RGD, 373RGD, 373PRGD and 377LG

Security 390MHz (Red or orange learn button openers) remotes model below

LiftMaster: 91LM, 92LM, 94LM, 96LM, 970LM, 971LM, 972LM, 973LM, 973W, 974LM

Chamberlain: 950CB, 953CB, 956CB

Sears Craftsman: 139.53680, 139.53681, 139.53684, 00953680000, 00953681000

AGAIN MAKE SURE your garage door remote is listed above or your opener has a purple, red or orange learn button BECAUSE OTHERWISE IT WILL NOT WORK - THIS REMOTE IS NOT UNIVERSAL.

Typical battery life is 2 years under average operating conditions when using Energizer, Sony, Duracell, Panasonic, Maxell or similar brands battery. Not applicable to factory pre-installed battery, which is provided for trial purpose only.

• ONLY works for 1997-2014 LiftMaster, Chamberlain, Sears Craftsman, Raynor, AccessMaster openers with PURPLE / RED / ORANGE learn button on the back (see all photos for clarification)
• Compatible with opener models 1345, 1355, 1356, 3220, 3240, 3265, 3270, 3280, 3800, 3500, 3850, 3585, 3595 etc (see description for full list)
• Replacement for 370LM, 371LM, 372LM, 373LM, 374LM, 950CD, 953D, 139.53753, 41A6127-1, HBW2028, 971LM, 972LM, 973LM, 974LM, 970LM, 139.53681, 139.53680 etc (see description for full list)
• High quality replacement combo remote, works with both Security 315MHz & 390MHz frequencies
• Easy to follow programming instructions, visor clip and CR2032 battery included

User questions & answers

Question:	Would this work with 953ev or klik3u
Answer:	Yes
Question:	I have chamberlain access master from 2011 with purple button model number M385M . Will it work
Answer:	No, you are not able to use just the motor. You would need to replace the entire system (motor, railing, etc)
Question:	Whats the range ...can i use it from downstairs
Answer:	Yes, the kit has angle brackets, lag bolts, wire clips, everything I needed to install.
Question:	Is 891lm also work
Answer:	Mine was only 7ft long my door 7 ft all 16 ft long does nice job quite operation to

Product description

Replacement remotes that work for any Chamberlain, Craftsman, Liftmaster and Raynor garage door operator (hanging in your garage) that have a purple learn button on the back.

- visor clip and instructions included

- high quality replacement garage remotes

- compatible with 370LM 371LM 372LM 373LM 374LM 950CD 953D 139.53753

• IMPORTANT - the opener hanging in your garage must have a PURPLE learn button on the back or this will not work (see photos)
• Easy to follow programming instructions and visor clip included
• Compatible with 370LM 371LM 372LM 373LM 374LM 950CD 953D 139.53753
• High quality replacement remote for purple learn Chamberlain, Craftsman, Liftmaster and Raynor openers

User questions & answers

Question:	Does it generate a new code with each use like the name brand one
Answer:	Hi Aleksey, the speed is 7'' per second in both directions.
Question:	Where would the "learn clip" be located at, on the liftmaster umit at the top of my garage roof? I'm not sure. This is all new to me
Answer:	This opener has the myQ technology built in. All you would need to do is connect the opener to your home's Wi-Fi network, download the myQ app on your device, and create an account within myQ. Using the myQ app is free and doesn't require an additional purchases to open/close your door through the myQ app. You should check your Wi-Fi strength in your garage though because this will affect the connection.
Question:	How do I replace the battery? I can't get the unit open
Answer:	Currently, we do not integrate with Alexa. We understand some customers would like to integrate with Alexa and we are working on a number of partnerships.
Question:	does it works with model
Answer:	There is a motion detection on the wall clicker. It stays on as long as it detects motion. There is also a light button. It is the far and away the best garage door opener that I have ever owned. I own 2 and love them. Near silent, tons of power, battery back up, led lights are bright. So much brighter than the traditional opener lights. Do yourself a favor and buy it. you will be glad that you did.

• Compatibility: The Acvoce garage door remote SM24 is compatible with Chamberlain, Craftsman, Liftmaster, Genie, Linear, Stanley, Overhead Door and more. Compatible model numbers 371LM 373LM 375LM 139.53753 139.18191 950CD 953CD 971LM 973LM 139.53680 139.53681 950CB 953CB 891LM 893LM 950ESTD 81LM 850CB 853CB 856CB 139.53879 893MAX KLIK1U and more.
• *IMPORTANT: PLEASE READ CAREFULLY BEFORE PURCHASING! NOT compatible with garage door openers manufactured by Wayne-Dalton, Allstar, Marantec, Hormann, or the Newer Liftmaster myQ type openers.
• Learn Button Color: The Acvoce universal remote is compatible with Green/Red/Orange/Purple/Yellow learn buttons and DIP Switches garage door openers.
• Two Channels: Features two buttons to control up to two garage doors or gates. The remote can even operate up to two different brands of garage door openers.
• Package Contents: Remote control, Visor clip, instruction manual, battery(contained in remote). If you have any concerns regarding the compatibility of your garage door opener, please contact us through our store front page " Ask a question", we will check it for you.

User questions & answers

Question:	Does this remote work for overhead door co. garage door model 65 a, dates to
Answer:	No.The fittings are for 1/2" pex
Question:	Will this opener work for a Moore-o-Matic Model 2150 which has a 8 dip switch setting
Answer:	Yes you can, would like to get more information on your project. I’ve done multiple floor types with in floor heat.
Question:	Will this work with Extreme garage yellow learn button
Answer:	Mine fit pretty flush. If there is too much play, the aluminum plates are very easy to reform so they do fit flush.
Question:	does it work with Sears 139.53615SR with yellow learn button
Answer:	I'm currently installing the ones I ordered. When installing, if you press the center of the plate tightly to the pex tubing and floor while stapling, then the pex sits tight. I'd highly recommend using a pneumatic stapler that accepts Arrow staples. The plates hold really well if you staple them to the subfloor. I added 3 close staples at the ends of the plate to secure it better. Having one person holding the plate and the second stapling makes the job much easier. The plates cut easily with metal cutting scissors. Be careful with the sharp edges, they can be quite sharp.

Product description

The Chamberlain 953EV-P2 Garage Door Opener Remote prevents hacking and provides peace of mind with Security+2.0, the highest level of encryption. Control up to three brands of garage door openers at once with this easy-to-program three-button remote. Compatible with nearly every garage door opener made by Chamberlain, LiftMaster and Craftsman, it’s the easy option for adding an extra remote to multi-car families or for replacing lost or broken remotes.



An extreme 1,500-foot range provides for “no waiting” roll-in access. Rigorous quality testing ensures that in addition to garage door openers, it can operate gate operators and MyQ Light Accessories for an all-in-one solution.



Includes visor clip, long-life 3V coin-cell lithium CR2032 battery and instruction manual. Not compatible with Craftsman Series 100.

From the Manufacturer

This garage door remote can operate up to three Chamberlain garage door openers and/or accessories, including MyQ light controls. Ideal for adding an extra remote for multi-car usage, or can act as a replacement for lost or stolen Chamberlain remotes. A long-life lithium battery and visor clip is included for your convenience.

• Worry-free: The three-button garage door opener remote prevents hacking and provides peace of mind with security+2.0, the highest level of encryption. Control up to three brands of garage door openers at once with this easy-to-program three-button remote
• Works with: Compatible with nearly every garage door opener made by Chamberlain, LiftMaster and Craftsman, it’s the easy option for adding an extra remote to multi-car families or for replacing lost or broken remotes
• More control: extreme 1,500-feet range allows you to operate a garage door opener, gate operator, MyQ Light Accessory or commercial door operator—all from the security of the driver’s seat—for “no waiting” roll-in access
• Simply secure: Security+2.0, the highest level of encryption, prevents hacking and provides peace of mind
• Easy setup: Universal wireless programming means no cutting into garage wiring or installation of an unsightly receiver

User questions & answers

Question:	will it work with HomeLink
Answer:	About 25 minutes
Question:	Are the buttons on the remote a squishy rubber type with no tactile 'click' when pressed or a hard plastic with a definite 'click' when depressed
Answer:	When it is plugged in the car battery has to be on.
Question:	anyone get this to work with your other chamberlin or liftmaster remotes? were you able to program all of them together with the RED learn button
Answer:	Normally heated for 40 minutes, about 65 degrees, if the heating time is 4 hours, the maximum is 80 degrees
Question:	Does it replace for the model 953estd
Answer:	Sure, that’s what it’s best at.

Product features

Chamberlain 953EV Garage Door Remote

This garage door remote can operate up to three Chamberlain, LiftMaster or Craftsman garage door openers and/or accessories, including MyQ light controls. Ideal for adding an extra remote for multi-car usage, or can act as a replacement for lost or stolen remotes. A long-life lithium battery and visor clip is included for your convenience.

• NOT compatible with garage door openers manufactured by Allstar, Marantec, Hormann, or the Newer Liftmaster MyQ type openers.
• COLOR LEARN BUTTON: Compatible with purple/yellow/green learn button or DIP switch garage door opener. Some of the red/orange button are also applicable. If you are not sure, please email your garage door opener model to us, we will check it for you.
• MODELS: Chamerlain/Liftmaster openers: 1345, 1355, 1356, 3220, 3240, 3265, 3270, 3280, 3800, 3500, 3850, 3585, 3595, 950CD, 953D 139.53753. Craftsman: HBW2028. Liftmaster remote model: 370LM, 371LM, 372LM, 373LM, 374LM, 375UT, 971LM, 973LM, 893MAX. Chamberlain remote model: KLIK1U.
• TWO CHANNELS: Two buttons, able to control 2 different garage doors with one remote. Support very old remote like multi-code, DIP switch remote. Easy programing. User manual included.

User questions & answers

Question:	How can I program this remote to the community gate
Answer:	12-2
Question:	Does this remote work for Chamberlain Model
Answer:	All electric heaters are near 100% efficiency. That's sad, I wouldn't say that it's more efficient. However, you will be able to replace several feet of baseboard with just one small vent in your wall. It's also really nice that the room will heat up in minutes.
Question:	Will the universal garage door remote control work with the sommer direct drive garage door opener
Answer:	Does not have it's own thermostat. So no.
Question:	We have an older Craftsman 1/2 h.p. model 139.53663srt2 model will this this garage door work with that device
Answer:	I have 3 of them hooked together. An 8', 4' and 2' one. They are on a 20 amp breaker. Always check with an electrician.

Product features

COMPATIBILITY

It is compatible with most popular brands including Liftmaster, Chamberlain, Genie, Stanley, Moore o matic, Linear, and wide frequency from 300MHz-390MHz.

LEARN BUTTON

Compatible with purple/yellow/green learn button and DIP switch garage door opener. Some of the red/orange button are also applicable.

VISOR CLIP

With a visor clip. It is convenient to use in the car.

TWO CHANNELS

Two buttons, able to control two garage doors with one remote.

MODELS

Chamerlian/Liftmaster openers: 1345, 1355, 1356, 3220, 3240, 3265, 3270, 3280, 3800, 3500, 3850, 3585, 3595, 950CD, 953D 139.53753.

Craftsman: HBW2028.

Liftmaster remote model: 370LM, 371LM, 372LM, 373LM, 374LM, 375UT, 971LM, 973LM, 893MAX.

Chamberlain remote model: KLIK1U.

*Not compatible with garage door openers manufactured by Allstar, Marantec, Hormann, or the newer Liftmaster MyQ type openers.

Programing Steps

Step 1: Start with your door closed.

Step 2: Press program button to enter into configuration mode.

Step 3: Press learn button on your existing door opener.

Step 4: Choose one button to pair, press correlated times of the button to match your brand.

Step 5: Garage door opener responded, PRESS the PROGRAM BUTTON to CONFIRM (This step is mandatory).

*Please check details in User Manual in Technical Specification section below within this page.

• Attention:only works for YELLOW Learn Button of Chamberlain/Liftmaster/Sears Craftsman Garage Door Openers.
• Battery,visor clip and user manual included.

User questions & answers

Question:	i currently have one working remote, can I add these two and have 3 remotes
Answer:	no
Question:	What is the working range? My original chamberlain will open my garage door from a block away
Answer:	I never intentionally checked the SS grade and I don’t recall seeing one.
Question:	How to adjust the sensitivity of the garage opener to the remote control? I can close the door close to the curb but only can open the garage near it
Answer:	You can order the missing parts from supply house.com

• STOP! Make sure your opener has a RED learn button before purchasing
• Remote is for openers manufactured from 6/1997 and 8/2005 with an RED learn button
• Please refer pictures to help locate your "programming learn button"
• for Security+ 390 Mhz
• See description for a list of compatible part numbers
• Please note: Item does not come in color variations

User questions & answers

Question:	Does this work with a Craftsman 139.53915D with purple learn button
Answer:	I personally ran about 90 ' from my house to garden. I buried underground about 8" I guess we will see. Its been good so far, I plan on blowing out line before freeze up but Pex is very forgiving on freezing .
Question:	Is the lithium battery included in each control? Is this item selling 1 remote control or two? Thank you
Answer:	I installed it between floor joists that were spaced at 14 inches with 2 inches away from each joist. That resulted in an effective diameter of 10 inches or a radius of 5 inches. With care, you can heat it with a heat gun and reduce the radius to less than that. There is further information available on the internet.
Question:	Does it matter if my manufacturing date is
Answer:	you can use it for potable water, however the non-oxygen barrier is suitable for potable water and less expensive
Question:	Not pairing. They will pair with the opener separate, but they will cancel the other one out. I pair one it functions, I then pair the second one and
Answer:	No, you should used crimp fittings and rings with this pex

Product description

The Chamberlain Original Clicker Universal Garage Door Opener Remote keeps you moving with two buttons that control up to two different brands of garage door openers individually. This easy to program remote is compatible with over 90 percent of all garage door openers installed in North America, including major brands such as Chamberlain, LiftMaster, Craftsman, Genie and many more. Whether replacing, updating, adding or consolidating remotes, this remote is the one that you know will work.



Rigorous quality testing ensures secure encryption to prevent hacking and extreme 800 ft. range for immediate access. It can also control gate operators and MyQ Light Accessories for an all in one solution.



Includes visor clip, long life 3V coin cell lithium CR2032 battery and instruction manual.

• Features two buttons to control up to two garage doors or gates. The chamberlain universal remote can even operate up to two different brands of garage door Openers
• Programming is easy. The chamberlain universal remote programs wirelessly to the garage door opener and does not require you to cut into wiring or install an unsightly receiver in your garage
• The Clicker is compatible with Genie, Linear, Stanley, Overhead Door, Wayne-Dalton, Craftsman, Chamberlain, LiftMaster, and more, Security +2.0 Compatible
• The chamberlain universal remote features long battery life, and withstands rigorous quality testing
• Visor clip, battery, and instruction manual are included

User questions & answers

Question:	Will this work with a Wayne Dalton 303mhz transmitter with rolling codes
Answer:	I'm afraid ours is not a direct replacement to the models you mentioned.
Question:	Will this work with Chamberlain CG
Answer:	The 41A5021-1M-315 is a 315MHz Security+ receiver logic board, which means it should be work. Thanks.
Question:	Will this work with the Challenger Garage door opener
Answer:	The range should be similar as your geniune ones.
Question:	Will this work with a Chamberlain model
Answer:	My opener has a red learn button so the remote must be compatible to a red learn button. This particular remote needs an opener with a purple learn button-make sure that’s what you have on your opener!

Product features

Clicker Universal 2-Button Garage Door Opener Remote

The Chamberlain Universal Remote works with all major brands of garage door openers. The remote control can be programmed to activate up to two products, such as a garage door opener, gate operator or commercial door operator. Easily programs wirelessly to the garage door opener and does not require you to cut into wiring or install an unsightly receiver in your garage.

Easy to Program & Compatible With Most Major Brands

The KLIK3U Clicker features clear and simple instructions for programming your remote to match the settings on your old one. Simply remove the front panel and push the Smart/Learn program button. Depending on your old remote control, you will use either the Smart/Learn program button in your system or match the dip switches to the settings on the old remote. A programming instructional video is available on our official.

The KLIK3U Clicker is designed to be used with garage door systems that feature photo-eye safety sensors which are compliant with current federal safety regulations.

The Clicker is compatible with Genie, Linear, Stanley, Overhead Door, Wayne-Dalton, Craftsman, Chamberlain, LiftMaster, and more.

More Information:

Chamberlain KLIK3U Clicker Universal Remote Control, one coin cell battery, visor clip and instructions.

Operates Two Doors for Added Convenience

The KLIK3U Clicker has two buttons and can be used with two different garage door manufacturers or frequencies. You can also program one or both of the buttons for use with Chamberlain gate operators. With one convenient remote for two operations, you can streamline your garage door operating system.

About Chamberlain

Chamberlain is one of the cornerstone companies of Duchossois Industries, Inc., a privately-owned, diversified, multinational company that carries the strength, respect, and financial stability of a billion-dollar-plus corporation.

Chamberlain is one of the world's largest manufacturer of residential and commercial door operators, access control products, and gate operators.

Product description

The Genie G3T-R 3-button remote features intellicode security technology to keep your garage secure while you’re home or away. The access code is changed on each door activation to prevent unauthorized access to your property. Also equipped with auto-seek dual frequency technology, Your garage door opener remote will automatically seek either 315 or 390 MHz, which minimizes interference from surrounding devices and improves overall performance. The Genie G3T-R 3-button remote works up to 3 (Genie only) garage door opener systems Manufactured from 1997 to the present. For Genie operators manufactured between 1995 and 1997, the 3-button remote will operate with up to 2 doors with the use of the top 2 buttons Only. This Genie garage door opener remote, will not work on dipswitch technology. The G3T 3 button garage door remote is easily programmable for use on your Genie garage door Openers. This 3-button garage door opener remote includes a visor clip for easy access and storage, A CR2032 battery and instructions For use. It can also fit on a keyring (not included). you can even use your Genie G3T-R 3-button remote to train Home link and car 2 U (Genie exclusive) built-in car wireless control systems, streamlining operation from your vehicle. Make your garage more easily accessible with the Genie G3T-R 3-button remote. Great replacement remote for popular older Genie Intellicode garage door opener remote models such as GICTD-1, GICTD-3, GIT-1, G2T-1, GIT-2, G2T-2, GIT-3, G2T-3, GICT390-1, GICT390-3, GMIC90-2, GMIC90-3, GIFT390-1, GIT390-4, GMI3, GIFTD-1, GIFTD-3, GITD-3, GIC90-1, GIC90-2, GIC90-3, ACSCTG Type III (and more)

• INTELLICODE SECURITY TECHNOLOGY: The Genie G3T 3-Button garage door opener remote keeps your home safe by using rolling code technology that changes the access code from billions of combinations
• AUTO-SEEK DUAL FREQUENCY: The Genie G3T garage door opener remote accesses strong, secure signals to minimize interference and improve overall performance
• WORKS WITH: This garage door opener remote can operate up to 3 Genie garage door openers manufactured 1997-present. Up to 2 openers manufactured 1995-1997
• EASILY PROGRAMMABLE: The Genie G3T garage door opener remote haze easy to follow programming instructions
• SIMPLE STORAGE AND USE: This garage door opener remote includes visor clip, battery and instructions. Can also fit on keyring if desired

User questions & answers

Question:	Will this model work on the opener genie blue max
Answer:	Yes, the G3T-R will work.
Question:	will this work on genie
Answer:	I don't believe there is. I bought the 2 pack and nothing I did to program them makes me think there is a limit.
Question:	I need help I would like to know which remote to order for a Genie Pro drive model CM7600IC
Answer:	Yes, it is compatible.
Question:	Does the remote come with a clip for the visor
Answer:	yes, works perfect. has a longer range

Product description

The Genie 1-Button Remote has Intellicode and an auto-seek dual frequency of 390MHz and 315MHz. It is compatible with all Genie openers produced since 1995. This remote can be used as a key-chain remote or clipped to your cars visor.

• COMPATIBLE WITH GENIE INTELLICODE GARAGE DOOR OPENERS: Designed to work with all Genie Intellicode garage door openers manufactured since 1995.
• SIMPLE PROGRAMMING: Easy to program, includes detailed illustrated programming instructions for easy setup.
• SIMPLE STORAGE & SLEEK COMPACT DESIGN: Includes a visor clip, but is small enough to fit on a key chain if so desired.
• AUTO-SEEK DUAL FREQUENCY TECHNOLOGY: Accesses strong, secure signals to minimize interference and improve overall performance

User questions & answers

Question:	I need am extra remote. i have genie model gict-390. is this compatible
Answer:	There isn’t a door exactly but you can see the wood in the picture acts as a door of sorts. There is a rope pull to get the ladder down. I plan to add a little molding to finish it off but that is not necessary.
Question:	Just curious to know if anyone having range problems has changed the battery. This problem usually indicates low battery power
Answer:	The steps are 14" long, but are mounted inside side-rails. so the effective "usable" width of a step is only 12".
Question:	Does this come with instructions for programming
Answer:	The manufacturer's description says, "This ladder fits ceiling heights from 7-Feet 8 in to 10-Feet 3-Inch".
Question:	Does it replace model #ACSCTG type
Answer:	Actually, the one we bought was 24 3/4 inches not quite 25.

Product features

The Genie Company

Genie is one of America's best known and trusted consumer brand names in the garage door opener industry. The company has an illustrious history that underscores its commitment to innovation. Millions of our products are in use today throughout North America. Dependability, high quality and nationwide service are just a few reasons to choose Genie branded garage door openers.

• Compatible with Genie IntelliCode openers from 1995-manufacture date to current (NOT work if your remote has dip switches)
• Replacement for ACSCTG Type 1, ACSCTG Type 2, ACSCTG Type 3, 37330R, G3T-A, G3T-BX (see description for full list)
• 3-Buttons
• Programming instructions, visor clip and battery included
• High quality aftermarket replacement remote, Solidremote brand

User questions & answers

Question:	Is this universal
Answer:	I have a well and have replaced the pump (and pipe) in it a few times. My experience tells me that PEX pipe is really not appropriate for a well. It comes in a roll, and thus has a natural bend in it, which is going to cause problems at the bottom of the well shaft, tending to push the pump to one side at the bottom, rather than it being centered. There is a seal down at the bottom that you have to get the pump through, and this off-centeredness is likely to cause you problems. Also, I don't think there are any pitless adapters made for PEX fittings, so you would have to convert from PEX to PVC or a metal fitting going into the pitless adapter -- more points of failure. Any in-line pex fitting at the top will be supporting the weight of 450 feet of PEX plus the weight of the pump plus the weight of the water in 450 feet of pipe. The SharkBite fittings stay on with tiny teeth that grab and hold the pipe. All that weight will put a lot of stress on those little teeth, and I would fear that over time they would give out and the remaining pipe and pump would then plummet to the bottom of the well. So although this would be a cheaper alternative, my recommendation is that you instead use PVC pipe that is chemically welded together with PVC cement. Good luck with your project!
Question:	do these remotes work for the genie pro excelerator
Answer:	No
Question:	How easy is it do you setup these remotes I am disabled? thank you kindly
Answer:	Depends on climate conditions. I would bury it deeper and insulste it in colder climates. Warmer climates would be just fine

• Attention: works only for G3T-BX remote of Genie IntelliCode garage openers from 1995-manufacture date to current (NOT work for remote with dip switches)
• Battery and user manual,visor clip included.

User questions & answers

Question:	Will these remotes work with a Genie 3060L 07/M garage door opener
Answer:	I do not know the answer to that question