12 best sight for pistols

Product description

Ade Advanced Optics first made its appearance in the firearms accessory industry by doing private label production for several Major manufacturers and retailers. During this period, Ade Advanced Optics began receiving requests from numerous customers for access to the affordable, high quality products that Ade Advanced Optics was capable of producing. By soliciting feedback from both clients and end users in 2010, Ade Advanced Optics was able to overcome the challenges a new company often faces when entering a global market and industry, especially one as competitive as the shooting, hunting, and outdoors industry.

• Newly release for fall 2019 by Ade Advanced Optics. Convenient charging by connecting the laser directly with the included magnetic USB cable. There is no need to remove a battery or plug into a port that will wear out over time
• This is a new updated version of the HG54G laser which takes non-rechargeable battery. This new HG54G RECHARGE comes with a built-in lithium polymer battery gives up to 90 minutes per charge, and the built-in battery has approximately 600 life spans. Potentially saves $600+ spending on batteries
• Offers the brightest laser allowed by Law. Non-handheld class 3R laser product, < 5Mw power output. Ultra lightweight and compact 1.79"L x 1.06"W x .85"H
• Pat Pending mounting design provides two spring loaded pillar to push to rail slot for rock solid zero movement. Weight: 1.13oz (Battery included). Does NOT fits Berreta due to extra wide trigger guard.
• Fit rail-equipped pistols, rifles and shotguns. The laser sight fits onto virtually any firearm with a modern (M1913 Pica tinny or Weaver-style) accessory rail

User questions & answers

Question:	does it fit a CZ 75 B in 9mm and Kimber camp guard in 10mm
Answer:	I absolutely love these shoes I have high arches and occasionally air gets between my foot and the shoe I guess you could call it a squeak..barely noticeable.
Question:	Can anybody tell me if it fits a Sar 9x? It does have a picatinny rail
Answer:	More metallic than black. .the arch support is decent. I have very high arches. I would say they run about a half size larger
Question:	Does it have Elevation and windage adjustment
Answer:	Yes. Their comfortable right out of the box. You can hike for hours in these. They stay dry and comfortable. And are not too heavy for carrying in a back pack.
Question:	does it fit my glock 19 gen
Answer:	They are European sizes so order accordingly. I wear a size 9 women’s which is a 39 European. Hope this helps. Note: these are women’s boots

• ACCURATE - Sharp 3 MOA Red Dot + multicoated lens keeps your view clear & on-target, without the deep blue tint found in other micro sights. Tactile “click” adjustments for easy sight-in.
• ADAPTABLE – Perfect for rifles, shotguns,& pistols. Top-loading battery and picatinny mount included. Compatible with Burris Fastfire / Vortex Venom mounts and handgun slide adapters.
• LIGHTWEIGHT, BIG VIEW – Compact design + weight of only 1.8oz. Extra-large field of view for quick target acquisition.
• DEPENDABLE - Waterproof with sealed electronics. Lifetime Warranty. Shockproof components to unfailingly maintain zero. Stealthy, scratch-resistant matte anodized finish.
• INSIDE THE BOX - ARO Red Dot Sight, Rubber Lens Cover, CR1632 Battery, Low Picatinny Mount, Instruction sheet, Lens cloth, Allen wrench for Windage Adjustment, Torx Wrench for Mounting Screws, Flathead Screwdriver for Battery Cap

User questions & answers

Question:	I don't like all the stickers/emblems etc. all over it, can they be removed
Answer:	Nope, just a cage or whatever to mount it on the plate
Question:	Will this fit a ruger model 66 357 mag
Answer:	Yes
Question:	Will this fit a glock 23 gen
Answer:	Yes, of course. This joystick is perfectly compatible with iPhone, iPad, Android phones, tablet PC and almost all touch screen devices.
Question:	Will this item fit on an .300 AC blackout
Answer:	Yes, dear, as long as the phone screen is kept clean, the joystick is placed on the screen and the game is played without removing the phone case.

Product features

Adaptable to Multiple Platforms

When the ARO was designed, AT3's goal was to make a lightweight micro dot sight that would work for just about everyone. Rugged enough to handle 12 gauge recoil, with as large a viewing window as possible, with a crisp 3 MOA reticle. This sight can endure the rigors of duty, in a small and easy-to-use package that can be adapted easily to your needs.

A Dot with a View

• This is our smallest red dot sight, with the biggest viewing area – with none of the bulk of a standard tube
• Multi-coated lenses are scratch-resistant and provide excellent image clarity
• Crisp 3 MOA red dot allows for accurate, both-eyes-open shooting on any platform
• Parallax free design: The red dot stays on target, no matter where the your eye is
• 6 red dot brightness settings provide optimal visibility in any lighting conditions

Truly Adaptable

• The ARO uses a Fastfire/Venom/Docter Style Mounting Footprint and includes a removable Low Mount for Picatinny Rails
• Optionally, we also offer an Absolute Cowitness Cantilever Riser Mount – for use with backup iron sights on modern platforms
• Waterproof circuitry ensures you’ll stay on target even in adverse conditions
• Shockproof circuitry resists damage, even when the dot takes a beating – from impact or recoil

Dependable

• Up to 5,000 Hours of Battery Life at Medium Brightness
• CR1632 Lithium battery included
• Includes a new rubber lens cover to protect the sight while in transit or storage

Specifications

• Power / Obj. Lens: 1x25mm
• Reticle: 2 MOA Red Dot
• Weight: 3.6 oz
• Total Length: 2.4 in / 61.8 mm
• Waterproof/Fogproof: Yes
• Body material: 6061 Aluminum
• Battery life: up to 50,000 hours on lowest setting. Approx. 5,000 hour with typical use
• Windage/Elevation Click Value: 1 MOA per click
• Adj Range: +/- 35 MOA (total adjustment range 70 MOA)
• Eye Relief: Unlimited

Riser Mount

• Mount Type: Fastfire/Venom/Docter Footprint
• Length: 1.6″
• Material: Black Anodized Aircraft Aluminum
• Weight: 1.1 oz

About Riser Mounts

• No Mount – For Direct Mounting to Fastfire/Venom/Docter pattern adapters
• Low Mount – For Direct Mounting to Picatinny Rails
• Absolute Cowitness Riser Mount – Optional mount for use with iron sights on modern platforms

• TACTICAL GREEN LASER: This compact laser pistol sight by Pinty boasts a 5mW 510-532nm class IIIA green laser, the strongest allowed under US law; the built-in mounting deck attaches firmly to any standard Picatinny or Weaver rail while remaining low profile; Laser Class: IIIa Laser Power less than 5mW
• DURABLE NYLON POLYMER: Our high-density fiber-reinforced nylon 66 housing keeps everything under 2 ounces but provides superior strength, heat stability, and longevity
• USB RECHARGING: The lithium-ion battery powers 90 minutes of continuous use or 2.5 hours of energy-saving pulse mode; afterwards, the included type-C USB cable recharges everything easily from your computer, adapter, or power bank
• HIGHLY ADJUSTABLE: Factory sighted at around 50 feet, the provided hex wrench allows quick windage and elevation adjustment to match your needs on the range, in tactical training, or for self defense; power buttons on both sides accommodate righties and lefties equally well
• SATISFACTION GUARANTEED: Our green laser sight has been rigorously tested to ensure its effectiveness and provide the highest-quality handgun accessory on the market; we back it with our usual strong warranty and friendly 24/7 customer service so you can be sure you'll enjoy its use for years to come!

User questions & answers

Question:	Will this fit nicely to a Glock
Answer:	You can adjust it via the two little holes (one is on the top, the other is on the side.) with the Allen keys included.

Product features

Simple USB Charging

This laser sight recharges from any USB port or adapter. The charging indicator turns green when the laser sight is fully charged. Once charged, the laser has about 1.5 hours of constant use or 2.5 hours of pulse use.

Bright Green Beam

Green lasers offer excellent visibility in virtually all lighting conditions from high noon to midnight. Our green laser is Class IIIA with a peak 5mW output at 515-532 nm, with 1½–2½ hours of operation before its lithium battery needs to recharge.

Two Modes Constant & Pulse

This tactical laser offers two modes for continual and energy-conserving pulse use to allow for personal needs and preferences.

Wide Application

Our green laser installs quickly and easily onto any handgun or long gun equipped with a standard Picatinny or Weaver rail and transfers just as simply from one firearm to another.

Product description

Technical Data:

Optical magnification: 1x,unlimited eye relief

Clear Aperture: 22.5mm x 17mm

Aiming Dot Size: 2 MOA

Optical Coating: Multi-Coated, Ultra-Clear lens

Battery Type: CR2032

Dimensions(LxWxH): 44mm x 27mm x 37mm (1.44” x 0.88” x 1.21”)

Net Weight: 60 grams (2.1oz)

What you will Get?

Package Included:

• 1 x red&green dot sight
• 1 x Rubber lens cap Cover
• 1 x cleaning cloth
• 1 x CR2032 battery
• 2 x wrenches
• 1 x manual
  
  

Good product and experience, strive to bring you the best shopping experience!

• Machined from Multi-Coated, Ultra-Clear lens offers a wide view, protect the lens from oil, dirt, and scratches while giving you the best sense of use.
• This tubeless-design reflex lens aperture provides a wide field of view. Suitable for rapid-firing or shooting of moving targets besides normal shooting.
• With strong anti-vibration,fog-proof and shock-resistant features sturdy and durable ensures a long life.
• Comes with removable picatinny rail mount allows complete mounting flexibility.Fit for most pistol,handgun,rifle or picatinny weaver rail.
• If there have any problems , please contact us and you will get the refund or a new product,strive to bring you the best shopping experience.

Product description

The 3 MOA Red dot is fully adjustable for windage and elevation.

User questions & answers

Question:	Will this fit on a rock island 1911 slide
Answer:	I don't know, I only used on my shoes and coats. I either got my clean clothes out of a sealed bag or out of the dryer after 15 minutes on high and got dressed in the laundry area then left.
Question:	Will this attach to a picatinny rail
Answer:	The manufacture states: Apply to cracks and crevices around baseboards, floorboards, bed frames, wall hangings, headboards, furniture, door and window frames, millwork and walls. Apply as surface spray to carpet, mattresses, box springs, walls, bedding, floor, rugs, garments, luggage, closets, drapes and other window appointments. After treatment, allow sprayed articles and surfaces to dry thoroughly before using or replacing bedding.
Question:	Will this fit a Canik tp9 sc
Answer:	This product did not work for me neither did any other product until I laid out around one thousand bucks to purchase a bed bug heater. The heater was the only thing that did the trick. It has been around a year since I heat treated my room, and I have never had another problem. I tried lots of different things. The heat was all that worked. Using sprays and powders do not kill the the bugs, it just causes them to migrate, which could be disastrous if they spread from one room to others.
Question:	What does MOA stand for
Answer:	This product did not work for me. I had a bad problem with bed bugs. I tried lots of different things to get rid of them. One product I tried was this one. I did not find that it worked at all. I went so far as to trap some bed bugs in a plastic container. I liberally sprayed them with this product. It had mixed results. Some it seemed to "stop" immediately. Others seemed unaffected. The one that it stopped, I thought was dead. However, when I came back later, I found that the bug had revived and escaped! Besides it not killing the bugs, it does something counterproductive.It stirs them up and gets them moving around. Usually, they will pick a place and sorts of stay there. If they're disturbed, much, they will migrate and start infecting other areas. Take it from me, and my many months of suffering. Don't bother with all the sprays, powders, bed covers, etc. The only thing that really kills them is heat. I purchased a room sized bed bug heater and applied 138 degree heat to the room for a couple of days. That permanently ended my infestation. It was the only thing that worked. It was expensive, but I regained the ability to sleep and stopped worrying.

Product description

This HiLight P3BL 300 Lumen Pistol flashlight Green Laser sight combo mounts to sub-compact and regular sized pistols with rail. Comes with rechargeable battery and micro-USB charging cord. Its powerful LED flashlight has two output modes, Steady and Strobe. Activation is by ambidextrous button side switch.

• [🎯 BRIGHT LED LIGHT] The LED flashlight (CREE XM-L2) outputs includes steady on/strobe modes with 300 lumen output and runtime of 55 minutes. To change output from steady to strobe or from strobe to steady, press and hold light switch for 1 second.
• [🎯 BRIGHT BLUE LASER SIGHTS] Precision BLUE laser beam intensity/wavelength: <4 mW peak, 441nm. Which is the Class IIIa and meets US FDA Safety Requirements.
• [🎯 RECHARGEABLE BATTERY] Both LED flashlight and Green Laser are powered by a built-in rechargeable battery, which is charged with a USB port plug, included
• [🎯 Operation] Blue laser sight and flashlight can be turned on or turn off independently, The laser sight can be tuned vertically and horizontally.
• [🎯 EXTREMELY LIGHT WEIGHT] The unit body is made hard anodized aircraft grade aluminum, which is light in weight but strong to endure all kinds of harsh environment.
• [🎯 DIMENSIONS]: LxWxH: 1.8" x 1.2" x 0.8"; Weight: 2.3oz.
• [🎯 INSTALLATION] In order to install this unit, the Clear Space (please refer to picture) of your pistol should be at least 32mm (1.25").

• SLIM AND COMPACT GREEN LASER - HAWK GAZER HG-LG-9 is a compact slim profile lightweight green weapon laser (Class IIIa, <5mw). Constructed of durable fiber-reinforced nylon and adding only 1.85 oz to your carry arm, it provides greate visibility in daylight.
• USB TYPE-C FAST CHARGING - There is no need to attach or detach the HG-LG-9 for charging or any batteries that need replacing. It has a built-in battery, comes with a USB-C charging port and can be fast-charged with the included cable.
• FITS BRANDS AND MODELS with RAILS - The HG-LG-9s profile and compact design allow it to sit beneath the barrel of the most popular carry options with almost no overhang. The three setting Picatinny/weaver attachment is compatible with almost any railed gun, pistol or rifle.
• AMBIDEXTROUS OPERATION - The HG-LG-9 comes with easy to reach ambidextrous control. Instantly activate when pressing either switch on both sides of the trigger guard. Activate the pulse setting by holding the on/off switch for three seconds.
• COMPLETE PACKAGE - This package comes with the HAWK GAZER HG-LG-9 and a compatible USB-C cable for lightning-fast charging speeds. Also included is an Allen wrench for laser adjustments.

User questions & answers

Question:	Will this fit my Glock
Answer:	I am sure your GLOCK has a RAIL.
Question:	What is the distance between the rail-surface and the very bottom of the housing
Answer:	It fits a standard Pica------ rail
Question:	Will it fit XDS
Answer:	The rail is probably too short to install the laser on.
Question:	Can you get extra batteries for this laser
Answer:	You don’t need batteries.it’s rechargeable.

Product features

HAWK GAZER HG-LG-9 Low Profile Rechargeable Green Laser Sight

The Hawk Gazer HG-LG-9 is a low profile rail mount USB rechargeable green laser sight (Class IIIa, <5mw). With its three rail mount positions, it snug fits most full size and compact pistols with 4 inches or longer accessory rail. It can also fit any rifles and shotguns with Picatinny rails. This bright green laser sight is visible even in broad daylight, which means easier target acquisition and target practice under any light condition.

USB C Rechargeable

There is no need to attach or detach the 9T for charging or any batteries that need replacing. The 9T has a built in battery and comes with a USB-C charging port, and can be fast charged with the included cable.

Bright Green Laser

The green laser on the HG-LG-9 is super bright even at night time. A green laser will appear four times brighter to the human eye than a red laser, allowing for rapid target acquisition and easy alignment.

Wide Compatibility

The 9Ts slim profile and compact design allows it to sit beneath the barrels of most popular carry options with almost no overhang. The three setting picatinny/weaver attachment is compatible with almost any railed gun, pistol or rifle. (Full compatibility list in images)

Product description

This ADE RD3-006, alone with RD3-009,RD3-012,RD3-013 do NOT fit Springfield HELLCAT OSP, because springfield Hellcat OSP red dot footprint is based on Shield RMS. ADE sights has the footprint of Doctor/Vortex Venom type footprint. This RD3-006, and RD3-009, RD3-012 and RD3-013 fits directly to "Optics Ready" pistols such as Glock MOS, Springfield OSP(non-hellcat), Canik TP9 SFX(non elite sc), Walter PPQ Q5 Match, FNX 45 Tactical, IWI Masada handguns that come with mounting plates that marked for DOCTOR/VORTEX VENOM type red dot. All mentioned above pistols must to be OPTICS READY model that comes with MOUNTING PLATE marked for DOCTOR/VORTEX. If not, user has to purchase after market mounting plate(not included with this red dot sight purchase) to replace the rear sight. When you first receive the red dot. It has a picatinny mounting plate pre-assembled. Please use allen wrench provided to take out the 2 hex screws on the top behind the glass frame. It will disconnect the red dot from the picatinny mounting plate. You will then be able to attach the red dot to a variety of handgun mounting plates that are sold separately. There are many popular handguns on the market, due to the size difference of the handguns, each mounting plate is slightly different in dimensions. There are also many manufacturers making a variety of handgun plates that replace the rear sight, including ADE, Lakeline LLC, EGW, and Outerimpact. The screw comes with our red dot come with a pair of M3x6mm screws to connect to the pre-assembled picatinny mounting base. Some mounting plates made by other companies for specific handgun might need a longer screw such as M3x8mm or shorter screw such as M3x4mm depends on the thickness of the mounting plate/adapter. If you can’t get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size.

• We have made several improvements since it's initial release in 2016. We have made it more durable to withstand recoil and improved the ability to hold zero. Designed in Oregon.
• Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.
• This GREEN dot comes with a picatinny mounting base. It is also compatible with varies handgun mounting plates that replace rear sight dovetail. It is also compatible to Optics Ready pistols such as Glock MOS, Springfield OSP,
• 3 MOA. Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Multi Illumination Settings. Powered by a lithium CR2032 battery(Included)
• Ade model RD3-006,RD3-009,RD3-012,RD3-013,RD3-015 are designed to fit the slide/footprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS. Any Plate made for those brands also fits this sight.

User questions & answers

Question:	What mounting base do I need for this optic it going on a g19 gen
Answer:	you can look at the bottom of the stick and look for these numbers (the writing is very small) 1st-gen = 2ABDU-0509 2nd-gen = 2AE6S-0948 Thank you
Question:	if i have a slide cut for glock 17 will this fit
Answer:	It doesn’t support Apple Music Biggest weakness
Question:	will this work on a hunting rifle
Answer:	This is a Play-Fi compliant device, so you use a PlayFi app on your phone to choose your streaming choice. I have multiple devices so I can move the music if I change rooms. It sounds really good to me on my equipment. It has an ethernet connection Wi-Fi and it does have a USB input but only for firmware updates not for media files.
Question:	Taurus pt111 compatibility
Answer:	It is 110v, normal household current in the US.

Product description

INTERNAL RED LASER FLASHLIGHT 2 in 1 COMBO



New Design of Internal Red Laser light Combo for handguns

Made of High Strength of Black Nylon material,lightweight and strudy construction.

220 Lumens Bright CREE LED Flashlight,Red laser with Accurate windage and elevation adjustments.

Ambidextrous on/off buttons are located on both sides can control 3 modes - flashlight only,laser only,laser&flashlight.

Can be easily get in line with the target and stay zeroed very well.

Fits Most of full size and subcompact handguns with Picatinny Rail System.



Specification:

Materal: High strength of black nylon material,lightweight and solid enough

Dimensions: LxWxH- 2.1x1.1x1.4 inch

Weight: 3.1 ounce

Fit Space: 1.15 inch from the mounting slot position to the trigger guard

Charging Type: Magnetic Charging with built-in battery

Battery Capacity: 400 mAH

Working time: Laser only-3 hours,flashlight only-1.5 hours,laser&light combo-1 hour

Laser class: IIIa

Laser Output: <5mW

Wavelength: 635nm to 650nm

LED Max Output: 220 Lumens

Attachment/Mount Type: Standard 1913 Picatinny Rail, Weaver Rail Accessories



How to Charge The Product:

1.Take out the Magnetic charging cable

2.Have one side of USB of the cable connected with charger,the other side of Mag Dock of the cable connected with the product.

3.Turn on the electric power to implement charging.

4.Power indicators in Loop Flashing means in process of charging,when the 4 Charging lights indicator in steady green color means charging in full.

5.Charging time: 2 Hours approx from empty to full.



Inside the Package:

1xflashlight laser sight

1xUser Manual

1xMagnetic Charging Cable

2xAllen Wrenches

• Tactical Red laser sight for handguns with 220 lumens LED flashlight,2 in 1 INTERNAL red laser and light combo-this makes it built in a very slim body that can suit most of holsters without any stuck.
• Magnetic Charging with built-in battery inside allows you to charge the pistol laser sight combo without removing from your gun,this can save a lot of your time and you do not need to calibrate the laser sight next time.New magnetic charging system for maximum convenience,powered by all common USB power sources.Magnetic charging method is time saving and money saving.
• Ambidextrous on/off switches are located on both sides of the flashlight laser sight,no matter using your left hand or right can easily operate the red laser sight,4 modes are available by switches,Laser only,LED only,both laser and light combo,strobe flashlight.
• Hold the recoil very well,this picatinny laser sight can be mounted to most of short and long sizes of pistols and rifles,with two of shockproofed stainless steel screws matched brass screw bushes can make the laser stay zeroed in long term of use.
• Long time battery endurance in one fully charge,when you charge in full of the battery,both laser and light combo can work up to 1.2 hours orso,just light 1.5 hours orso,just laser can reach up to 3-5 hours

User questions & answers

Question:	Does it fit a Glock 27 compact
Answer:	The one best tailored to your expected application. CQB, LR, point of impact designation, parallel ray assist - there are a lot of different ways and reasons to employ a laser target designator. Knowing how you expect to use it helps a lot in determining the device best suited for your application.
Question:	Do you have holsters on sale that accordant with the flashlight laser
Answer:	No
Question:	How to replace the battery if it's dead of use,how long time can the laser light combo last
Answer:	This is a great scope. My second one. Yes it does come with lens covers.
Question:	What's the differences between green and red laser sight,i see you also have green model
Answer:	Don't know about The air rifle, but I would guess not. The turret is marked for 17 and 20 grain bullets. They travel much faster out of a .17HMR than theair rifle. The objective is on the rear.

Product description

Specifications: Laser class: IIIa Laser range：50-100m Material: high quality polymer Max. Output Power:＜5mW Weight: 28.6g Length: 30mm Wavelength: 625-650nm Package Features:

Compact, small size, low profile

Windage and elevation adjustable (wrench included)

Ambidextrous design has easy to operate on/off press-button switch on either side of the laser sight

Detachable 20mm weaver rail, mounts securely onto standard pistol rail

Package Included:

1x Green Dot Laser Sight

1x Rail Wrench

1x Battery Wrench

1x Windage/Elevation Adjustment Wrench

1x Magnetically Charged FAST CHARGING Battery

NOTE:

The small adjustment hole on the top is for elevation adjustment(adjust up/down). The other one on the side is for windage adjustment(right/ left).



LIFETIME WARRANTY! Just send the product back and we'll refund you or replace with a new one! No questions asked!

• ✔ COMBAT VETERAN OWNED COMPANY! I stand by, create, and manufacture only the products that I use myself as a soldier.
• ✔ FAST MAGNETIC CHARGING & LIFETIME WARRANTY - We provide you with Also, if you don't like the product or if something happens to it please return it for a full refund or a new one! No questions asked!
• ✔ RIFLE, SHOTGUN, OR HANDGUN - This versatile laser sight can be mounted on any firearm with a picatinny or weaver rail.
• ✔ INCREDIBLE ACCURACY! You can adjust and zero-in this laser just like any other sight or optic. Simply use the elevation and windage wrenches included.
• ✔ HIGHLY VISIBLE & HIGHLY DURABLE - This laser is very powerful and can be seen with the naked eye at distances of up to 100 meters! It is made of a ultra-reinforced polymer that is both lightweight and will last a lifetime.

User questions & answers

Question:	Will it hold zero on a 556 ar
Answer:	Daytime-100 meters, night-time 500 meters
Question:	Is this made in the United States
Answer:	As long as there is picatinny rail built with your pistol,this green laser sight will fit fine
Question:	Can I mount this on a Benjamin Prowler 22 caliber air rifle
Answer:	You just need to tap the button,then the laser sight will be working,one more tapping will turn off
Question:	Whats the difference between this one and the one on your website. Twice the price on website vs amazon price
Answer:	No it will not fit on Taurus G2 c Because I ordered one and it arrived yesterday 8/7/20

Product description

Increase your confidence with this Crimson Trace CTS-1550 Ultra Compact Open Reflex Sight for compact and subcompact pistols. The 3.5 MOA LED aiming dot has a battery life of 20,000 hours and an ambient light sensor to automatically adapt brightness. Adjustable windage and elevation allows you to customize the sight to fit your needs. The industry standard mounting interface makes the CTS-1550 easy to install and has an integrated co-witness sight to give you added certainty when taking aim.

• DIMENSIONS: 1.7" L x 1" W x 1" D with a weight of .65 ounces
• RUNTIME: 20,000 hours (2 years) of battery life that runs on CR2032 battery (included)
• EASE OF USE: Get the perfect brightness with the built-in ambient light sensor and the lightweight polymer design ensures this sight won't weigh you down when carrying or using your pistol
• ACCURACY: Sight features a bright 3.5 MOA red dot reticle for easy target acquisition
• RELIABLE: Have added confidence in your shot with the integrated co-witness sight

User questions & answers

Question:	Will this fit a Springfield xdm
Answer:	Perfect fit
Question:	Will it fit on a cz P10S
Answer:	Seeing as the holster is designed to be carried as a "pocket holster". I see no draw back to the usage in any way for a south paw shooter. As a small note be sure your left pocket is empty (of course) just a bit of common sense info..
Question:	Will this fit my H&K Vp
Answer:	No, I haven't. But I understand it is only for thr LCP, according to Viridian.
Question:	Will this mount to my sccy cpx
Answer:	Before inserting the pistol into the holster, push the power button on the left side of the laser. Point laser at ground to determine laser is on. Then insert pistol into holster. The laser should switch off when the power button is next to the magnet located inside the holster. When the pistol is drawn the laser should be on. I strongly suggest you turn the laser off using the power button when you do not intend on carrying the pistol. Just remember to turn back on with intended use.

Product description

This ADE RD3-006, alone with RD3-009,RD3-012,RD3-013 do NOT fit Springfield HELLCAT OSP, because springfield Hellcat OSP red dot footprint is based on Shield RMS. ADE sights has the footprint of Doctor/Vortex Venom type footprint. This RD3-006, and RD3-009, RD3-012 and RD3-013 fits directly to "Optics Ready" pistols such as Glock MOS, Springfield OSP(non-hellcat), Canik TP9 SFX(non elite sc), Walter PPQ Q5 Match, FNX 45 Tactical, IWI Masada handguns that come with mounting plates that marked for DOCTOR/VORTEX VENOM type red dot. All mentioned above pistols must to be OPTICS READY model that comes with MOUNTING PLATE marked for DOCTOR/VORTEX. If not, user has to purchase after market mounting plate(not included with this red dot sight purchase) to replace the rear sight. When you first receive the red dot. It has a picatinny mounting plate pre-assembled. Please use allen wrench provided to take out the 2 hex screws on the top behind the glass frame. It will disconnect the red dot from the picatinny mounting plate. You will then be able to attach the red dot to a variety of handgun mounting plates that are sold separately. There are many popular handguns on the market, due to the size difference of the handguns, each mounting plate is slightly different in dimensions. There are also many manufacturers making a variety of handgun plates that replace the rear sight, including ADE, Lakeline LLC, EGW, and Outerimpact. The screw comes with our red dot come with a pair of M3x6mm screws to connect to the pre-assembled picatinny mounting base. Some mounting plates made by other companies for specific handgun might need a longer screw such as M3x8mm or shorter screw such as M3x4mm depends on the thickness of the mounting plate/adapter. If you can’t get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size.

• Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Multi Illumination Settings. Powered by a lithium CR2032 battery(Included).It is also compatible with varies handgun mounting plates that replace rear sight dovetail.
• This Huracan Green Dot Sight fits directly to Optics Ready pistols that does not need to remove rear sight such as Glock MOS, Springfield OSP. It also fits Canik using Canik provided mount marked for Doctor/Venom type red dot.
• However the front switch of the sight needs to trim down 2mm depends on exact pistol model if the pistol's pre-cut is very short..
• Comes with an removable picatinny mounting base to attach to any thing with piatinny rail. Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Powered by a lithium CR2032 battery
• ADE RD3 006,RD3 009,RD3 012,RD3 013,RD3 015 are designed to fit the slide/footprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS.Any Plate made for those brands also fits this sight.

User questions & answers

Question:	Will it fit a s&w 9mm sd9ve
Answer:	You can use an adaptor plate that fits into the rear sight dovetail. Lakeline LLC makes one for the PT111 G2, G2C, etc.
Question:	Will this fit a Ruger Maxx
Answer:	Not sure it is more so set up for a slide with RMR CUT or on a picatina rail format. If your 1911 slide has a RMR cut then it jus may fit. I use it on a glock slide no problem and an AR15 build as well. hope this helps
Question:	Will this fit on a walther pk
Answer:	Not sure, I buttoned it on a Glock 40 with just 4 screws. The only hang up is how not to lose the dust cap. Electronicly stable device. Functionally sound and stable when shooting U-wood.
Question:	Does this fit the smith and Wesson m&p 40 caliber standard model
Answer:	I'm not 100% sure. But most reflex optics are universal, as long as you have the right mounting plates for the firearm.