13 best remington recoil pads
Remington recoil pads are accessories designed for firearms, specifically rifles and shotguns. These recoil pads are a part of the gun's stock and serve the purpose of reducing the recoil or kickback experienced when firing a high-powered firearm. Here's what you should know about Remington recoil pads:
Recoil Reduction: The primary function of a recoil pad is to absorb and dampen the recoil generated by the firearm when a shot is fired. This recoil can be uncomfortable or even painful, especially when using firearms with significant firepower. Recoil pads help mitigate the effects of recoil, making shooting more comfortable and less physically taxing.
Material: Remington recoil pads are typically made from materials that provide cushioning and shock absorption. Common materials used include rubber, synthetic materials, and specialized recoil-absorbing polymers. These materials are selected for their ability to absorb and distribute recoil energy.
Installation: Recoil pads are designed to be installed on the buttstock of rifles and shotguns. They are attached using screws or other fastening methods and are often designed to fit specific models or stock configurations. Proper installation is essential to ensure the recoil pad functions effectively.
Variety: Remington offers a range of recoil pads to cater to different firearms and preferences.They may vary in size, thickness, and design. Some recoil pads are designed to be slip-on or snap-on accessories, making them easy to install and remove.
Customization: Some shooters choose to install aftermarket recoil pads to customize the fit and feel of their firearms. These aftermarket options allow shooters to tailor their guns to their specific needs and comfort levels.
Compatibility: When selecting a Remington recoil pad, it's crucial to ensure that it is compatible with your specific firearm model. Using the correct recoil pad for your firearm helps maximize its effectiveness.
Maintenance: Recoil pads should be inspected regularly for signs of wear and tear. If a recoil pad becomes damaged or loses its effectiveness, it should be replaced promptly to maintain the firearm's recoil reduction benefits.
Legal Considerations: While recoil pads are common accessories for firearms, it's essential to be aware of local and national regulations regarding firearm modifications and accessories. Always comply with relevant laws and regulations when installing or using recoil pads.
In summary, Remington recoil pads are firearm accessories designed to reduce the felt recoil when shooting rifles and shotguns. They are made from materials that absorb and distribute recoil energy, enhancing shooter comfort and control. When considering a recoil pad, ensure compatibility with your firearm and follow proper installation procedures for safe and effective use.
Below you can find our editor's choice of the best remington recoil pads on the marketProduct description
Reducing felt recoil by up to 70 percent, the customized LimbSaver AirTech Precision-Fit Recoil Pad for Synthetic Stocks is designed to specifically fit a variety of rifles, shotguns, and muzzleloaders. LimbSaver's AirTech line features atmospheric chambers that produce a substantial increase in performance through uniform energy dissipation, and it incorporates anti-muzzle jump technology for faster target re-acquisition. The recoil pad enables you to shoot longer without discomfort and bruising, while also helping to increase accuracy of follow-up shots and provide improved control for maximum stability.
It's made from LimbSaver's proprietary NAVCOM technology (Noise and Vibration Control Material), which effectively absorbs a wide range of frequencies to dissipate energy and vibration. This recoil pad also features a no-slip surface that stays in place even in the rain. See the following for model compatibility:
- Model 10802 -- Browning A-Bolt (synthetic stock); Browning BPS Youth and Ladies (wood); Harrington/Richards SB2-988 Slug Hunter (wood/laminate); Mossberg ATI pistol grip non-tactical (synthetic); Parker Hale 7mm mag (wood); Remington Model 870 Youth (wood); Winchester Model 70 (wood); Winchester Model 94 (wood; flat stocks only)
- Model 10804 -- Thompson Center Arms Triumph, Triumph Bone Collector, Pro Hunter FX (Venture), and Encore Pro Hunter (all synthetic stock)
- Model 10805 -- Christensen Arms Carbon Summit and Carbon Classic (synthetic stocks); Marlin Model XS7 (synthetic); Remington 700 ADL/BDL//ML, 710, 770, 7600, 1100 12/16g, VTR Centerfire (synthetic); Remington 1100 Tactical 12/22 OD-Green (synthetic); Remington 870, 870 Express Straight Stock Tactical (synthetic); Remington VTR Centerfire (synthetic)
- Model 10807 -- CVA Wolf ML (1996) and Eclipse Hunter ML (synthetic stock); Mossberg Maverick 88 20-gauge (synthetic); Remington 700 ADL/BDL (4-15/16-inch flat wood stock); Remington 721 (wood); most Savage (synthetic); Stevens 200 (synthetic); Stoeger Uplander 12-gauge (wood); some Verona 20-gauge models (wood); Weatherby PA-08 12-gauge (synthetic); Weatherby 300 Win Mag (synthetic); Winchester Model 70 (synthetic); Winchester Super X 1 (wood)
- Model 10812 -- Choate Dragunov, Varmint, Sniper, Tactical, Mark 5, Mark 6, MK, M-5, and M-6 (synthetic)
Using state-of-the-art technologies, LimbSaver produces highly effective noise- and vibration-dampening products for archery and firearm products, including bow stabilizers, recoil pads, rifle slings, and more. Proudly engineered and hand-made in the USA, LimbSaver products are widely used by outdoor enthusiasts, military, law enforcement, and more.
- Model 10805 -- Fits Christensen Arms, Marlin, and Remington models (see product description for details)
- Easy-to-install recoil pad helps reduce up to 70 percent of felt recoil, increase stability for improved control
- Atmospheric chambers produce a substantial increase in performance through uniform energy dissipation
- Made from LimbSaver's proprietary vibration-dampening NAVCOM material; non-slip surface for use in all harsh weather conditions
- Incorporates anti-muzzle jump technology for faster target re-acquisition
- NOTE: Refer the User Manual from the Technical Specification before use which is highly recommended.
User questions & answers
Question: | Will it fifth the Sako 75 synthetic stock |
Answer: | Will it work on 10/22 Ruger? |
Question: | Will this fit a remington versa max with a synthetic stock |
Answer: | To anyone that buys stuff that requires Allen wrenches to install/adjust, save yourself a LOT OF TROUBLE and do not use the crap that comes with.... Get a good set of Bondhus wrenches both metric and standard. Most of the supplied wrenches are of p-poor "quality" and will only round out the Allen screw when any significant torque is used.... I'll tell you now - TOLD YOU SO ;-) |
Question: | Is there a model for the Tikka T3x Superlite |
Answer: | This mount will work on rails up to 22 mm and is adjustable. |
Question: | Does this model fit the Remington Model 700 wood and synthetic stock |
Answer: | I used this to mount a Simmons 8 Point 3x9x40 on a Marlin 795 .22 semi auto rifle. Works like a charm and has held zero since mounting. You should have no problems with your application. |
Product features
AirTech Precision-Fit Recoil Pads
Reducing felt recoil by up to 70 percent, the customized LimbSaver AirTech Precision-Fit Recoil Pad is designed to specifically fit a variety of rifles, shotguns, and muzzleloaders.
LimbSaver's AirTech line features atmospheric chambers that produce a substantial increase in performance through uniform energy dissipation, and it incorporates anti-muzzle jump technology for faster target re-acquisition. The recoil pad enables you to shoot longer without discomfort and bruising, while also helping to increase accuracy of follow-up shots and provide improved control for maximum stability.
It's made from LimbSaver's proprietary NAVCOM technology (Noise and Vibration Control Material), which effectively absorbs a wide range of frequencies to dissipate energy and vibration.
Precision-Fit
Designed to specifically fit many firearm popular models. Easy to install — all that's required is a screwdriver. Available in two models — classic and Airtech for optimal recoil reduction.
Slip-On
Designed for maximum compatibility and ease of use. LimbSaver's slip-on recoil pads come in two models — classic and Airtech for optimal recoil reduction.
Grind-to-Fit
Fully customizable, these recoil pads can be tailored to perfectly fit your stock using a belt grinder.
Product description
Designed to specifically fit a wide variety of rifles, shotguns, and muzzleloaders, this LimbSaver Classic Precision-Fit Recoil Pad for Synthetic Stocks reduces up to 70 percent of felt recoil and incorporates anti-muzzle jump technology for faster target re-acquisition. See the following for model compatibility:
- Model 10003 -- Browning A-Bolt (synthetic), and BPS Youth/Ladies (wood); H&R SB2-988 Ultra Slug Hunter; Mossberg ATI Pistol Grip Non-Tactical; Parker Hale 7mm (some wood); Winchester Model 70 and Model 94 (wood)
- Model 10008 -- Browning Gold 12ga/20ga and Silver 12ga (synthetic); Stoeger M2000 (no pistol grip), Model 2000, and P-350 Pump (all syn)
- Model 10011 -- Ruger K77/22 (synthetic); Sako 75 and A7 (syn); Tikka T3 (laminate), T3 Battue Lite (syn), T3 Deluxe & Hunter (wood), and T3 Lite (syn); Verona 20ga. (wood)
- Model 10012 -- Blaser R93 Professional (synthetic)
- Model 10018 -- Model 10018 -- H&R Handi-Rifle Straight and Monte Carlo (synthetic)
- Model 10031 -- Thompson Center Arms Black Diamond (wood/synthetic), Encore (wood/syn), Encore Pro Hunter (syn), Omega ML (wood/syn), Triumph (syn), Venture (syn)
- Model 10101 -- Model 10101 -- Marlin Model XS7 (synthetic); Remington 11-87 (syn), 1100 12/16ga (syn), 700 ADL/BDL/ML (syn), 710 (syn), 7600 (syn), 770 (syn), 870 12/16ga. (syn), SP-10 (syn), VTR Centerfire (syn)
- Model 10111 -- CVA Wolf ML and Eclipse Hunter ML (synthetic); Remington 700 ADL/BDL 4-15/16” (wood stock) and 721 (wood); Savage Arms (syn); Stevens Model 200 (syn); Stoeger Uplander 12ga SXS Standard (wood); Winchester Model 70 (syn) and Super X 1 (wood)
- Model 10121 -- Mossberg 4-7/8" synthetic stocks
- Model 10301 -- Browning Gold 10ga. (synthetic); Winchester Model 1300 (syn)
- Model 10403 -- Benelli Tactical Pistol Grip Stocks (bolt-on pad)
- Model 10404 -- Benelli Tactical Pistol Grip Stocks (pop-in pad)
The recoil pad helps increase accuracy of follow-up shots and you'll enjoy increased control for maximum stability. It installs in seconds and is durably built to be used outdoors in harsh environments. It's made from LimbSaver's proprietary NAVCOM technology (Noise and Vibration Control Material), which effectively absorbs a wide range of frequencies to dissipate energy and vibration. This recoil pad also features a no-slip surface that stays in place even in the rain.
- Model 10101 -- Fits a variety of Remington synthetic stocks, plus the Marlin Model XS7 (syn)
- Easy-to-install recoil pad helps reduce up to 70 percent of felt recoil, increase stability for improved control
- Incorporates anti-muzzle jump technology for faster target re-acquisition
- Made from LimbSaver's proprietary vibration-dampening NAVCOM material
- Non-slip surface ideal for use in all harsh weather conditions
User questions & answers
Question: | Does this fit a remington |
Answer: | https://limbsaver.com/ |
Question: | Does limbsaver make a pad for browming bps 12ga. Wood stock |
Answer: | Airtech 10805 was drop-in fit on my Remington Versamax. It fits very well, but not perfect - about 1/64" small all the way around. It shortened the lengh-of-pull by about 1/2", which turned out to be just right for me. FYI, I had to reuse the factory screws from the Supercell recoil pad. If I had it to do over again, I would order a new set of screws. Be sure to oil the screw heads/shaft, and the screwdriver shaft when inserting them into the new pad. |
Question: | Would this fit a iac hawk |
Answer: | Hello the Limsaver Airtech Size Small should fit the Tikka Superlite. |
Question: | I have a Remington 870 youth stock, will this fit |
Answer: | It does not fit the wood stock on my 700 remington, not sure about synthetic stock |
Product description
Reducing felt recoil by up to 70 percent, the advanced LimbSaver AirTech Recoil Pad is available as a slip-on option for most rifles, shotguns and muzzleloaders. It features advanced atmospheric chambers that produce a substantial increase in performance through uniform energy dissipation, and it incorporates anti-muzzle jump technology for faster target re-acquisition. The recoil pad helps increase accuracy of follow-up shots and you'll enjoy increased control for maximum stability.
Designed to easily slip over existing firearm stocks without any modifications, the AirTech Recoil Pad will work best with removing the current factory recoil pad before installation. The AirTech Slip-On can be installed directly over the factory recoil pad to increase the length-of-pull by 1 inch (LOP), but to achieve optimum performance, LimbSaver recommends the removal of the existing factory recoil pad. It's made from LimbSaver's proprietary NAVCOM technology (Noise and Vibration Control Material), which effectively absorbs a wide range of frequencies to dissipate energy and vibration. This recoil pad also features a no-slip surface that stays in place even in the rain.
It comes in four sizes:
- Small fits stocks measuring 4-1/2 x 1-1/2 inches to 4-13/16 x 1-5/8 inches
- Small/Medium fits stocks measuring 4-5/8 x 1-9/16 inches to 5-1/8 x 1-3/4 inches
- Medium fits stocks measuring 4-13/16 x 1-5/8 inches to 5-1/8″ x 1-3/4 inches
- Large fits stocks measuring 5-1/8 x 1-3/4 inches to 5-3/8 x 1-7/8 inches
Using state-of-the-art technologies, LimbSaver produces highly effective noise- and vibration-dampening products for archery and firearm products, including bow stabilizers, recoil pads, rifle slings, and more. Proudly engineered and hand-made in the USA, LimbSaver products are widely used by outdoor enthusiasts, military, law enforcement, and more.
- Slip-on recoil pad for most rifles, shotguns and muzzleloaders; reduces up to 70 percent of felt recoil
- Easily installs over existing firearm stocks without any modifications
- Incorporates anti-muzzle jump technology for faster target re-acquisition
- Made from LimbSaver's proprietary vibration-dampening NAVCOM material
- Non-slip surface ideal for use in all harsh weather conditions
User questions & answers
Question: | I have a remington 770. 7mm mag it kicks like a mule will it help dull that down |
Answer: | I don't know. It did not fit my wood stock 700 30-06. but it will fit my 1100. |
Question: | what size will fit remington 870 express tactical |
Answer: | Yes, but some grinding may be required. It will work on most high powered guns and shotguns. Mine is attached to a 30-06 ancient war relic. Lol. Match the size to your stick end. Hope this helps. |
Question: | Small and Small/Medium are the same? specifications make non-sense, both Small and Small/Medium shows the same numbers, looking for Rem 1100 12ga |
Answer: | I am not exactly sure, to my understanding this model fits Remington and Marlin models. I hope this helps |
Question: | What are the dimensions of this item? inside measurements |
Answer: | I used the slip on pad by Pachmayer as I had the wooden stock. it fit great and you can use it on other guns limbsaver makes one too that is excellent. It will however extend for length of pull. I have found limbsaver Precision fit not so precision and modifications such as new holes were needed on Mossbergs. Both manufacturers pads are superior to knock offs. |
Product features
LimbSaver AirTech Slip-On Recoil Pad
Reduce felt recoil by up to 70 percent with the LimbSaver AirTech Slip-On Recoil Pad, which features advanced atmospheric chambers that produce a substantial increase in performance through uniform energy dissipation. Incorporating anti-muzzle jump technology for faster target re-acquisition, the AirTech Recoil Pad also helps increase accuracy of follow-up shots and you'll enjoy increased control for maximum stability.
Designed to easily slip over existing rifle, shotgun and muzzleloader stocks without any modifications, the AirTech Recoil Pad works best by removing the current factory recoil pad before installation. It can be installed directly over the factory recoil pad to increase the length-of-pull by 1 inch (LOP), but LimbSaver recommends the removal of the existing factory recoil pad to achieve optimum performance.
Made from LimbSaver's proprietary NAVCOM technology (Noise and Vibration Control Material), the AirTech Slip-On Recoil Pad effectively absorbs a wide range of frequencies to dissipate energy and vibration. Durably built to be used outdoors in all harsh environments, the no-slip surface stays in place, even in the rain.
Slip-On
Designed for maximum compatibility and ease of use. LimbSaver's slip-on recoil pads come in two models classic and Airtech for optimal recoil reduction.
Precision-Fit
Designed to specifically fit many firearm popular models. Easy to install all that's required is a screwdriver.
Grind-to-Fit
Fully customizable, these recoil pads can be tailored to perfectly fit your stock using a belt grinder.
Product description
Twod Recoil Pad is the best way to eliminate hard-hitting recoil and properly fit your gun.The gel filled recoil pad seems to be the best recoil pad that balances great value with its price among the recoil pads listed above. While using an innovative way to reduce the effect of the impact from a rifle, it can also be easily installed and comes with three additional mini pads. It also allows for its use over a wide range of guns and has an adequate thickness which can be further increased with the use of the mini pads.
- It not only reduces 70% of recoil felt but the incorporation of Anti-muzzle technology helps in fast targeting.The pad easily fits over the stock of a long rifle or shotgun without any tools or modifications to the weapon.
- Offers a superior fit and feel versus rubber slip-ons. Also great for gun fit, easily adjust length-of-pull.The stretchy slip-on neoprene cover fits nearly all gunstock sizes and works excellent with both shotguns and rifles.
- Rubber backing keeps the hi-density inserts in place – which are constructed of closed cell foam, known for its exceptional high energy absorption properties. Simply place foam into sleeve and pull on – no gunsmithing or drilling.
- With its ultra-soft cushioning it saves your shoulder by reducing the fatigue of the gun.By reducing recoil, can assist in eliminating shoulder fatigue while improving your shooting accuracy.The pads fit comfortably in the shoulder pocket. The butt end of the pad is made from a material with a high surface tension material so that the gun will not move on the shoulder when it is fired.
- The Polymer plating at the base resists cracks or bends. An ideal recoiling pad that perfectly fits on the rifles or pistols. Its Stable base plating offers an easy slipping of the pad.These recoil pads from highly energy absorbing material, which is extremely easy to remove.
User questions & answers
Question: | Does this pad fit on shotguns with composite stock |
Answer: | What size Limbsaver recoil pad fits a Remington model 700 30-06 wooden stock |
Question: | Does it reduce the pain to your shoulder |
Answer: | Justin, just slipped my medium onto my 870 and it fit great.Max |
Question: | can this fit mossberg mvp rifle snug on the butt |
Answer: | The difference between the Small and the Small/Medium is the thickness of the pad and the resulting change in the LOP. Small is a 1 inch coil pad and Small/Medium is a 1/2 inch coil pad. This is the sizing from the Limbsaver web site (Limbsaver.com):"The AirTech Slip-on works on most curved and flat stocks.Small/Medium: 1/2″ LOP 4-5/8″ x 1-9/16″ up to 5-1/86″ x 1-3/4″Small: 1″ LOP 4-1/2″ x 1-1/2″ up to 4-13/16″ x 1-5/8″Medium: 1″ LOP 4-13/16″ x 1-5/8″ up to 5-1/8″ x 1-3/4″Large: 1″ LOP 5-1/8″ x 1-3/4″ up to 5-3/8″ x 1-7/8″."I used those measurements to pick out the AirTexh's that I bought for my Benelli M2, Weatherby Mark IV and my BAR. The AirTech pads are very good, but you want them to fit SNUG on the butt of your stock(s), so measure carefully. If none of the sizes are an exact match for your stock, I suggest you err to the small side and muscle the AirTech pad on. There is room for a little error on size, but you really don't want it to be too big..............Good luck - Ken |
Question: | would this be any help with the mule kick of a Mosin Nagant M |
Answer: | I bought this exact item (Small) here at Amazon a couple of months back. I have it attached to a Hogue 12" L.O.P. stock on a Mossberg 590A1. Here's a link to the Hogue stock, just in case you're considering replacing your current stock. Thanks to Robert Easley for posting measurements!http://www.hogueinc.com/store/products/mossberg-500-overmolded-shotgun-stock-12-lop/4615Btw, it's a great product which really minimizes recoil from a shotgun, while firing high powered shells. Good luck! Happy New Year!! |
Product description
The Shooterpads Recoil Pad is an innovative solution to recoil energy absorption. The pad easily fits over the stock of a long rifle or shotgun without any tools or modifications to the weapon. The pads is has a thin Lycra covered neoprene cuff that stretches over the stock of the gun and does not inhibit the shouldering of the weapon. There are three mini cell foam pads in addition to the Visco-Elastic Gel that can be easily added or removed. The pads serve two purposes. The can be used to add additional energy absorption and to adjust the pull length of the gun. The pads fit comfortably in the shoulder pocket. The butt end of the pad is made from a material with a high surface tension material so that the gun will not move on the shoulder when it is fired.
- The visco elastic gel in the Shooterpads recoil pad is and excellent energy absorbing material.
- The three mini-cell pads can be added or removed to increase energy absorsion and to adjust the pull length.
- The pads install on the butt of any long rifle or shotgun in a matter of seconds.
- The Shooterpads Recoil Pad can be easily moved from gun to gun without any tools or modifications to the gun
- One size fits all makes and models.
User questions & answers
Question: | Will this product fit the Mossberg 930 spx synthetic stock without the pistol grip |
Answer: | It can fit.most stocks since it streaches around the stock |
Question: | Can this fit a Smith & Wesson M&P |
Answer: | I think it helped on my over under. |
Question: | how much length does it add to the stock |
Answer: | Not sure about that but it fits my Remington 870 pretty snug. You won't have to worry about it coming off once you get it on. |
Question: | Will this work with a Mosin-Nagant? The M91 full-sized, not the M44 carbine |
Answer: | It helps with my Mosin 91/30. It might help with your M44. |
- Made of high quality flexiable Rubber material, comfort touch and durable.
- Size measured by 12.5x3x8cm, it will fit for most rifle and shotguns.
- Easy to install and remove, no tools needed,just need cover the butt in seconds.
- The pad will protect your shoulder from the shock of your rifle or gun, it will absorb most of the stock, good choice for shooting enthusiasts.
- We have black and brown color for choice, get the most cost-effective butt for your shotguns and rifles.
User questions & answers
Question: | Will this fit Stevens 320 pump shotgun 12ga |
Answer: | Should fit! Fits my Beretta with synthetic stock |
Question: | Will it fit on a 742 30-06 woodsmaster |
Answer: | The recoil pad is elastic so it expands to fit any long gun stock. The M&P 15 takes a .223 round which seem to have little recoil but it should fit. |
Question: | Does this slip on over the stock butt? The stock butt fell off my Ithaca 37 and screws are stripped so can’t replace. Worried this will be too big |
Answer: | It depends on how many of the inserts you use, maybe an inch if you use all of them. |
Question: | Will this fit on an h&r pardner protector |
Answer: | the stocks are the same length at the buttstock. I have the M44 carbine, my buttstock is small. The pad moves around too much. IMO the pad works best with medium to large buttstocks. |
Product description
Features:
This one allows you to grind it down to the right dimensions.
Grind-to-fit recoil pad for a customized fit on standard stocks .
The recoil pad helps increase accuracy of follow-up shots and you'll enjoy increased control for maximum stability.
This gun pad is long lasting & durable and excellent quality.
Gives your shoulder all the protection and comfort it needs while you are at the range or in the field.
Can reduce felt recoil when hunting shooting .
Specification:
Material: Silicone
Weight: 0.08kg / 0.17lb
Dimensions: 13cm x 4cm x 3cm / 5.11" x 1.57" x 1.18"
Package List:
2 x Recoil Absorption
- You can glue it to your gun stock or drill holes use screws attach to your gun stock by yourself (not including screws)
- Easy to install and great shock absorption
- The accessory absorbs the shot energy and prevents a gun sliding on your shoulder
- Good for shotgun and rifles
- The recoil absorption material is soft, be careful when grinding it
Product description
Compatible with: Kel-Tec (Sub-2000, RDB, KSG), RUGER (PC Carbine, 10/20 Carbine, AR-556, Prescision Rifle, American Rifle,No. 1), Smith and Wesson (M&P Sport II, M&P15, M&P15-22), DPMS (Oracle), Colt (M4 Carbine, Standard), Browning (X-Bolt, BLR, A5), Remington (700, 700 SPS, 760, 7600 Carbine Synthetic / Wood, 870 & 870 Express), Tompson (Center Venture & Compass & Pro Hunter & Encore),Howa (1500), CZ-USA (455, Ringneck, Sharp-Tail, Hammer Coach, Bobwhite), Marlin (Marlin 1895, 1894, 366), Henry Repeating Arms (Lever / Big Boy / Golden Boy / All-Weather / Pump / Single Shot Rifle, Single Shot Shotgun), Winchester (1892, 24), Rossi (R92, 62, Circuit Judge, S41), Taurus (C45 Thunderbolt, 72), Beretta (Gold Rush, 686 Silver Pigion I), Chiappa Firearms (Little badger), Keystone (Arms Crickett), Connecticut Valley Arms (Hunter, Scout, Springfield), Uberti (1885), TriStar (Arms Raptor & Corba), Franchi (Affinity, Instinct), Stoeger (3500, Condor, Coach Gun, Uplander), Mossberg (590, 590 Shockwave, 500, 590A1, 500 Tactical), Maverick Arms (88, HS-12), Browning (BT-99, Citori 725, Cynergy), Hatfield Gun Company SGL, Savage Stevens, H&R 1871 Ultra Slug, Century JW-2000 Coach, Cimarron 1878 and many more...
- REDUCED RISK OF INJURY OR PAIN: Reduce gun recoil and shock thanks to our hyper absorbent Visco-Elastic Gel filled shotgun recoil pad
- INCREASE YOUR ACCURACY: Higher stability for better follow-up shots. Improve your edge while hunting, clay shooting or at the shooting range...
- MADE TO LAST: Double stitched & made from only the best fabrics to last a lifetime.
- FLEXIBLE & EASY TO USE: Simply fit over the buttstock of any rifle or shotgun without modifications. Works for wooden & synthetic stocks.
- COMPATIBLE WITH: KEL-TEC , Ruger, Smith and Wesson, DPMS , Colt, Browning, Remington, Tompson, CZ-USA, Marlin, Henry Repeating Arms, Winchester, Beretta, Chiappa Firearms, Keystone, Rossi, Taurus, Connecticut Valley Arms, Uberti, TriStar, Stoeger, Maverick Arms, Browning, Hatfield, Savage, H&R and many more...
User questions & answers
Question: | Will this fit a Remington Versa Max |
Answer: | id at end of butt 4 1/2x1 5/8 |
Question: | What are the actual measurements of the recoil pads |
Answer: | Fits my Remington 700 30-06. |
Question: | is it made in the USA |
Answer: | Put bigger screws in. yes this fits over the butt stock |
Question: | Will this fit on a ruger 10/22 carbine 22lr, model 1103 hardwood stock |
Answer: | Don't know if it will fit your rifle but I have one and it does nothing to mitigate recoil. It's sitting in the bottom of my clothes chest. If you want to lengthen your stock that's all it's good for. Spend a few extra bucks and get something that works like the Limbsaver. The very best one I've found is the Beartooth Recoil Pad Kit 2.0 - Slip-on/Adjustable - Made in USA. It's only $21 bucks. |
Product description
Known Fits/Small: BAIKAL: Some - BROWNING: A-Bolt, A-Bold Medallion (most), A-Bolt New Short Mag, BLR Model 81 - H&R: SB2-998 Slug Hunter, ITHACA: Storm (most), MARLIN: 444, 450, 336, 512 (most) MOSSBERG: 500 AG Turkey 12ga, 500 Bantam, 500 Youth, 9200 (most), 9300 (most) NEW ENGLAND ARMS: Handi-rifle, Handi-rifle youth, Parder, Parder Youth, Tracker II Slug PARKER HALE: 7mm mag (most) 870 Express, 870 Express Deer, 870 Express Super Mag REMINGTON: Combo, 870, 870 Express Turkey, 870 Police, 870 Wingmaster, 1187 SP 1992, Model 7, 700ADL/BDL (4-7/8" stock) RUGER: M77 Mark II Compact (Most) SAVAGE: Most THOMPSON CENTER: Thunder Hawk 50 cal TIKKA: Most WINCHESTER: 70 Carbine 30.06, 100 (most), 1300, 70 Class Shadow, 70 (most), 70STR Sporter (most), 94 Legacy - Ranger, 94 (most), 94 Trapper, Super X2 - Known Fits/Medium: BAIKAL - some models, BENELLI - Nova, M-1 Field 12ga (non tactical), Montifeltro 12ga, Sport 12ga, Super Black Eagle 12ga (non-tactical) - BERETTA: 5" stocks, - BROWNING: BAR Auto, Citori (most), Gold Auto, Gold Ultimate Turkey - CHARELS DALY: O.U., Empire Hunter 20ga, Vaimax 912 12ga - CVA: Wolf ML - FRANCHI: Alcoine 12 ga, Auto Comp. 12ga, Varimax 912 12ga - ITHACA: Model 37 (1970's and older) - MOSSBERG: 500 (Camo, blk, green) 835, 935 - REMINGTON: Model 700 ADL/BDL (4-15/16" stock) - RUGER: Mini 14, KRELZ 1236, ML, No. 1, M77 (most), Red Label ('79/'80) - SAVAGE: Most Models - STOEGER: Most 12ga Models - THOMPSON CENTER: Black Diamond, Encore, Omega ML - TIKKA: Tikka T3 Lite - VERONA: Verona 12ga - WeatherbyL SAS Shotgun, SAS Slug gun - WINCHESTER: 1400 (most), 670 (most), ML, Model 70, Model 70 Featherweight (most), Super X1 (most), Supreme Select Sporting Over/Under.
- Uses high tech recoil reducing polymer to reduce felt recoil up to 70%
- Slip on, installs in seconds
- For guns with straight stocks
- Great for long days at the range
- Perfect for people who don't want to wear a shooting vest
- Dimensions (small): 5 1/8" (5.125") x 1 3/4" (1.75")
- Included Components:
User questions & answers
Question: | what are the pocket dimensions of the product ? inside height at opening and inside height at closed end |
Answer: | Not really sure. I bought it for my Savage 220 and it fits very tight and snug. Supposed to fir almost all stocks. |
Question: | will it fit a 10-22 stock |
Answer: | I don’t know but they seem to be universal and fit any rifle or shotgun |
Question: | Will this fit gunstocks- 1 measures 1 5/8 inches X 5 inches. The other is 1 9/16 inches X 4 11/16 inches |
Answer: | GREAT I am glad I bought them. Two of them, 1 for my 12G, the other one for my AR-15. Buy it you won’t regret it... |
Question: | What size for Stevens 320 pump shotgun |
Answer: | It should unless it's a customized stock, It fits our It should unless it's a customized stock, It fits our Ruger Mini 14 (223/556) and makes great difference for comfort and ease to interchange onto several other rifles, |
Product description
The easiest way to reduce felt recoil for hard-to-fit stocks, the LimbSaver Slip-On Recoil Pad provides the same shooting comfort as LimbSaver's precision fit pads. Simply slip the pad over the stock of most rifles, shotguns, and muzzleloaders for a recoil reduction of up to 50 percent. The recoil pad helps increase accuracy of follow-up shots and you'll enjoy increased control for maximum stability.
Designed to slip over existing firearm stocks without any modifications, it will work with or without factory recoil pads. It's made from LimbSaver's proprietary NAVCOM technology (Noise and Vibration Control Material), which effectively absorbs a wide range of frequencies to dissipate energy and vibration. The Slip-On Recoil Pad comes in the following sizes:
- Small size with 1-inch thick length of pull; for stocks measuring from 4-1/2 x 1-1/2 inches up to 4-13/16 x 1-5/8 inches
- Small/medium size with 1/2-inch thick length of pull; for stocks measuring from 4-5/8 x 1-9/16 inches up to 5-1/8 x 1-3/4 inches
- Medium size with 1-inch thick length of pull; for stocks measuring from 4-13/16 x 1-5/8 inches up to 5-1/8 x 1-3/4 inches
- Large size with 1-inch thick length of pull; for stocks measuring from 5-1/8 x 1-3/4 inches up to 5-3/8 x 1-7/8 inches
Using state-of-the-art technologies, LimbSaver produces highly effective noise- and vibration-dampening products for archery and firearm products, including bow stabilizers, recoil pads, rifle slings, and more. Proudly engineered and hand-made in the USA, LimbSaver products are widely used by outdoor enthusiasts, military, law enforcement, and more.
- Slip-on recoil pad for most rifles, shotguns and muzzleloaders; reduces up to 50 percent of felt recoil
- Easily installs over existing firearm stocks without any modifications; ideal for hard-to-fit stocks
- Made from LimbSaver's proprietary vibration-dampening NAVCOM material
- Helps increase accuracy of follow-up shots
- Medium size with 1-inch thick length of pull; for stocks measuring from 4-13/16 x 1-5/8 inches up to 5-1/8 x 1-3/4 inches
User questions & answers
Question: | Do you think the Small size will fit 20 gauge Rem 1100 with 1" cut off stock |
Answer: | It doesnt really matter because they stretch pretty good.. so it if you think ur rifle might be to big it will be just a perfect tight fit. |
Question: | will it fit a marlin 30aw |
Answer: | I'm not sure why you'd want one for a 22 stock ... unless you just wanted it for additional stock length. In any case ... I have a Ruger 10-22 myself and I found that the medium Allen Company pad I purchased for a Mossberg Maverick 88 was loose on the 22. I don't know that a smaller size wouldn't work ... but the medium doesn't work for me on the 10-22. |
Question: | I have 2 12 ga. shot guns. the stock at the butt is 4.5 X1.5" on 1 and 5.0 X1.75 on the other. Will this slip on recoil fit on these shotguns |
Answer: | One fellow says the small pad has these dimensions: 5 1/8"(5.125") x 1 3/4"(1.75") ... its the first "most helpful" 5 star comment. The medium size (which I have) has these dimensions: 5-7/16" x 1-7/8" (based on measurement with a ruler). It rather looks like the small might fit your first gun. Its hard to tell if the small pad would be too large for your second one or not. You might try buying a single small pad, as it likely will fit your first rifle. And when you get it, test it on the second rifle. If it fits, then use the one pad on either rifle. Or if you want each rifle to have it own then just buy another for your second rifle. |
Question: | What size will fit my remington 870 express 12 gauge syn tact shotgun |
Answer: | Medium fits perfectly. Small does fit and will work, but it looks like the picture of the sleeve on the wood stock. Just a touch small. |
Product description
No Gunsmithing required! Pachmayr’s Decelerator recoil pads provide the ultimate in recoil control and appearance and now you can install them on all your long guns. Designed to fit within .050 inch tolerance on factory stocks, these pads will enhance the look and feel of the gun, improve your shooting experience, and maybe help you bag more game. Features: - Easy “Do-It-Yourself” installation - Replaces hard factory pads - Custom “pre-ground” fit Size Large fits: Stock dimensions of 1-3/4" to 1-7/8" wide x 5-3/16" to 5-7/16" long, or will fit the following: Beretaa: 686, 687 Field models, 302, 303 Semi-Auto Browning: Citori with English Stock
- Easy do-it-yourself installation
- Replaces hard factory pads
- Custom pre-ground fit
User questions & answers
Question: | Does this add to the length of pull? I hope it does |
Answer: | Jo Ann--I not sure of the measurements of the rem 20, especially with a 1" cut-off, but I can tell you two things for sure. First, the limbsaver is worth every penny if you can get it to fit properly, and, Secondly, if it doesn't fit, it can always be returned free for an exchange. give it a try...jim |
Question: | What size would be needed for a savage axis |
Answer: | I'm not familiar with a Marlin 30AW but it fits my Marlin 336 beautifully |
Question: | Will this fit a Mosin-Nagant |
Answer: | I believe the exact dimensions are on the Description page! |
Question: | What are the dimensions of the small and medium pads |
Answer: | I sent them a e-mail for my Stevens Model 58 20 gauge and they ask me the length and width of my gun and I ordered the size they suggested. Fits Perfect. |
Product description
The F325 Deluxe pads have remained popular because of their classic appearance and excellent recoil absorbing qualities. These pads are an excellent choice for those who prefer a softer side to the pad for collarbone comfort.
- Package length: 23.368 cm
- Package width: 8.636 cm
- Package height: 4.572 cm
- Product Type:SPORTING GOODS
User questions & answers
Question: | The package size is not too important how about the actual pad size |
Answer: | Adds one inch to the length of pull, which is the reason i bought it. Most 12 gauge doesnt kick enough to really justify the use of this at least to me. |
Question: | The package size is not too important how about the actual pad size |
Answer: | Measure the length of the butt end of your stock from top to bottom. You want it to fit snugly, but it doesn't stretch a whole lot. |
Question: | Will this item fit precisely on a browning citori cxs |
Answer: | The Decelerator in small size will fit Mosins. I have them on a 91/30 and a M44. I might also add that in other sizes I have them on Mausers, a 03 Springfield, and H & R single shot shotguns. You could say that I am sold on them. |
Question: | How are these attached |
Answer: | Small fits stocks 1-1/2" to 1-5/8" wide x 4-3/4" to 4-7/8" longMedium fits stocks 1-1/2" to 1-3/4" wide x 5" to 5-3/16" long Large fits stocks 1-3/4" to 1-7/8" wide x 5-3/16" to 5-7/16" long |
Product description
Ideal for a customized fit on rifles, shotguns, and muzzleloaders, the LimbSaver Grind-to-Fit Recoil Pad reduces up to 70 percent of felt recoil and incorporates anti-muzzle jump technology for faster target re-acquisition. This medium model recoil pad works with standard stocks with a 1-inch thick length of pull that measure up to 5-3/32 x 1-13/16-inch. It can be ground down to 4-1/4 x 1-5/16 inches. The recoil pad helps increase accuracy of follow-up shots and you'll enjoy increased control for maximum stability. It's made from LimbSaver's proprietary NAVCOM technology (Noise and Vibration Control Material), which effectively absorbs a wide range of frequencies to dissipate energy and vibration. This recoil pad also features a no-slip surface that stays in place even in the rain. Using state-of-the-art technologies, LimbSaver produces highly effective noise- and vibration-dampening products for archery and firearm products, including bow stabilizers, recoil pads, rifle slings, and more. Proudly engineered and hand-made in the USA, LimbSaver products are widely used by outdoor enthusiasts, military, law enforcement, and more.
- Grind-to-fit recoil pad for a customized fit on standard stocks
- Helps reduce up to 70 percent of felt recoil, increase stability for improved control
- Made from LimbSaver's proprietary vibration-dampening NAVCOM material
- Non-slip surface ideal for use in all harsh weather conditions
- Medium size fits standard stocks with a 1-inch thick length of pull, up to 5-13/32 x 1-13/16 inches
User questions & answers
Question: | Can I install this with a hand sander |
Answer: | It is important to match the pad size with the size of the stock . |
Question: | What color is it , (assuming black?), the pic is not clear to me and not one word about color |
Answer: | 5 1/2" X 1 7/8" X 1" |
Question: | Does this pad include screws? If not, what size do I need for the small? Thanks |
Answer: | In my experience no pad or but plate fits precisely. They all need a certain amount of fitting. |
Question: | What size do i need for winchester model |
Answer: | There are two screws included with pad. There are two holes thru the hard black plastic base. You have to put small cut in rubber recoil pad to use screwdriver to screw in two holes you have to predrill in stock. There are instructions included with pad. You can also find very good videos on utube. |
Latest Reviews
View all
Generic Double Ovens
- Updated: 20.01.2023
- Read reviews

Golf Game For Wii
- Updated: 10.02.2023
- Read reviews

Bausch Lomb Eye Health Vitamins
- Updated: 17.07.2023
- Read reviews

Sunbeam Home Ice Cream Makers
- Updated: 31.05.2023
- Read reviews

Ganz Marker Sets
- Updated: 29.01.2023
- Read reviews