10 best bipod for rifles

• With return springs and leg release button, the leg length can be adjusted from 6 inches (152mm)to 9 inches(225mm).
• Made of hardened steel and aluminum, non-rust black anodized finish, the rifle bipod is duty and light weight.
• Adjustable leg length: 5 settings for different length, the bipod is ready to meet your needs.
• Quickly attach to or detach from the rifle using existing swivel stud.
• Foldable arms with spring tension control. Come with the mount adapter.

User questions & answers

Question:	How do i attatch the rail mount to the bipod itselfl
Answer:	Yes... Remove the plastic tube from the bipod, untwist the thumb screw, thus will loosen the fingers. Place onto the piece that mounts to your to your rail system, finger tighten then attach the bracket to your rail at desired location and tighten with supplied allen wrench. The plastic protection tube can throw you off...
Question:	Would tho bipod fit on a springfield saint ar 15 5.56 rail
Answer:	This bipod comes with a weaver/pictatinny mount adapter so if your fire arm has either of those rail types, it will fit. It requires about 4 slots on a picatinny rail (just an estimate).
Question:	Can a sling be mounted to the attached bipod? I don't want to give up my sling to mount a bipod
Answer:	Yes, there is the ring on the bipod for you to attach sling.
Question:	Does it have the swivel or pivot feature
Answer:	It doesn't have a swivel or pivot feature, however I just got mine and mounted it and just checking it out at home I found that you actually can pivot up and down a reasonable amount, and I was actually able to pivot it a good amount as well. Didn't measure, but probably around 20-30 degrees worth, which would translate to many moa's and a good amount of distance at range. I had a bipod with swivel and pivot features and it never really locked in like I would have liked, so I actually like the way this one feels more. First impressions are really high. So far I can't tell the difference between this one and a much more expensive 'famous maker' one I had. Will be taking it out in the next day or two and can't wait.

• Adjustable leg length (5 settings) with return Springs, you could adjust the length to meet different needs when hunting.
• Press the button,the legs can eject fully and quickly.The length of legs can be adjusted from 6-9 inches.
• Made of hardened steel and aluminum, non-rust black anodized finish, the bipod is duty and light weight.
• Durable with new design high quality that you can quickly attaches to sling swivel stud.
• Applicable for sling swivel stud rifle.

User questions & answers

Question:	hello there I ordered one of your bipods my question is I'm putting it on a stock that is flat in not curved will it still work
Answer:	It should work. The Bipod has cushioned strips to help grip and secure to your stock. It is v-shaped to allow space to mount to your sling nut.
Question:	will it work with savage axis xp .308 bolt action
Answer:	If you have a strap on your savage 308 all you have to do is disconnect the strap and the bipod will attach to your stock.
Question:	Will this work on a Crosman break barrel air rifle
Answer:	If you have a swivel swivel holder hardware on the stock you can attach.
Question:	will this fit on a 93r 17hmr
Answer:	It appears that it should fit your 17 her. The bipod has two opposing pins that when loosened up will slide into the sling mount stud on the rifle. Then you tighten it up by turning the tension wheel on the bipod. It mounted easily to my Remington 7mm magnum mount which is similar to yours. Hopefully this helps. Happy shooting!

Product features

Forend Pod

Forend pod on the top of bipod provide a friction to add stability but won't scratch your rifle.

Rubberized Feet

Rubberized feet grip numerous types of surfaces, which stabilize shooting position and keeps your shot steady and on target.

Fold Bipod

Bipod is easy to deploy with one hand and spring make the deployment solid.

Lock Button

Fully adjustable and lockable legs with quick retraction features can meet different needs of height.

Bottom Design

Thumbscrew makes your installation and detachment easy and you can attach your rifle sling to the buttom clamp or the bar between legs.

• Combined with double 100% real Carbon fiber rods of each legs,weight(8.8oz) of this bipod is lighter than metal aluminum, but strength is higher than steel.
• With return springs and leg release button, the leg length can be adjusted from 6 inches (152mm)to 9 inches(225mm).
• High &low temperature resistance,corrosion&fatigue resistance-Carbon fiber bipod can be used to any environment, it can hold the rifle more stably and shoot more accurately.
• The surface of this carbon fiber bipod is more slippery, the pattern looks more stylish. From different perspective,the surface will reflect various pattern,which makes your bipod distinguish from others.It feels better and experiences better, brings you unprecedented ease.
• Adjustable leg length: 5 settings for different length, the bipod is ready to meet your needs.Come with the mount adapter and wrench, you can install the bipod to your rifle conveniently.

User questions & answers

Question:	Will this mount on smith& Wesson sport
Answer:	As long as it’s a standard style sling mount. I’ve used it with both K Mod and M lok adapters.
Question:	What do i need to attach this to a ruger precision
Answer:	Fits any gun with a sling stud, even the molded in ones.
Question:	I wanna use this for my Barrett crossbow would this be good for that
Answer:	Yes
Question:	Will this mount on a savage model 12? To the sling stud
Answer:	I wouldn’t think so. It’s not very heavy, has the ability to loosen itself at times, barely handles 5.56

Product features

Carbon Fiber Bipod with PIcatinny Adapter

Carbon fiber material makes our bipod stand up to heavy recoil.

Picatinny adapter help to intall bipod to picatinny or weavor rail.

Fold Bipod

Bipod is easy to deploy with one hand and spring make the deployment solid.

Lock Button

Fully adjustable and lockable legs with quick retraction features can meet different need of heights.

Buttom Design

Thumbscrew makes your installation and detachment easy and you can attach your rifle sling to the buttom clamp or the bar between legs.

Product description

Like every Trigger Stick, the New Primos Trigger Stick Gen 3 adjusts to your desired height with just one hand and the pull of a trigger. The New Locking Leg Angles give you more stability at more angles in the field. The New Quick Detach Yoke System with Integrated Lock makes it easier than ever to switch from gun to optics and back again. Smoother panning action helps you rotate, scan and find your perfect shot effortlessly. It’s the next level of Trigger Stick to give you the next level of confidence in every shot in all terrain – standing, sitting, or kneeling.

• Adjust from 24″ to 62″
• New contoured grip with no slip backbone
• Strengthened rotating joint for smooth panning
• Note keep in locked position at all times to assure yoke or optics are secure

User questions & answers

Question:	Does the Primos 65815 tripod extend from 24" to
Answer:	Yes. I just used it on a hunt out in Wyoming for antelope. It was worth every penny. The camera mount adapter is also a really nice feature.
Question:	Can you use this as a walking stick, does the legs have a tight strap around them or does it need to be packed
Answer:	Yes, you could use this as a walking stick; yes, it does have an adjustable strap to hold the legs tightly together.
Question:	Where can i find just the replacement quick release v yoke ? lost mine during a hunt
Answer:	https://www.amazon.com/Primos-Trigger-V-Yoke-65501-Shooting/dp/B07B2JTTFY/ref=aw_m_crc_sbs_2_10?_encoding=UTF8&pd_rd_i=B07B2JTTFY&pd_rd_r=4dd6cd83-6519-4be8-88dd-05a1bb3b7a7c&pd_rd_w=gCDub&pd_rd_wg=2J0e3&pf_rd_p=2b8758fa-25c0-4c1b-a21e-d28a5ba6acf8&pf_rd_r=FNXX67CV7Y9BP1E7TBH5&psc=1&refRID=MNKFAGJCGWQFDTTSNAJS
Question:	Anyone ever mount a gun clamp on this
Answer:	It has standard tripod threads on the top so you can mount about any style clamp or other top to it.

Product features

Primos Trigger Stick Gen 3 Series

The Primos Trigger Stick Gen 3 adjusts to your desired height with just one hand and the pull of a trigger. The Quick Detach Yoke System with Integrated Lock makes it easier to switch from gun to optics and back again. Smoother panning action helps you rotate, scan and find your perfect shot effortlessly. It’s the next level of Trigger Stick to give you the next level of confidence in every shot in all terrain - standing, sitting, or kneeling!

• Made of LIGHTWEIGHT MIL-SPEC hard anodized 6061 T-6 aluminum and Injection-molded polymer; aesthetically pleasing, LOW-PROFILE DESIGN conceals its mechanisms and hardware, smoothly brushing off Snags and bumps
• Optimized for RAPID ONE-HANDED ADJUSTMENTS; quickly and quietly transitions between countless user configurations
• Easily loaded with STABILIZING FORWARD TENSION without fear of failure or warping; at just over 11 oz. , The Magpul bipod is LIGHTER THAN MANY PRICIER BIPODS currently on the market
• SPRING-TENSION LEGS stow neatly forward and snap down and lock into place with ONE HAND; LEG EXTENSIONS slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents
• An INDUSTRY-EXCLUSIVE 50° of TOTAL TILT and 40° of TOTAL PAN are Controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots

User questions & answers

Question:	Will it handle .300 win mag
Answer:	No. Engineered, Designed, Tested, Manufactured and Shipped from right here in the USA.
Question:	Why is the Flat Dark earth cheaper than the Black one? Are they made with different materials
Answer:	Yes. 3 slot is long enough
Question:	Is this made in China
Answer:	4 15/16 - about 5 inches
Question:	I'm wanting to combine this with a "kinect 3-slot rail" for easy on/off. is the 3-slot rail long enough
Answer:	Just under 5 inches long

Product features

Serious Strength, Versatility, and Value

The Magpul Bipod offers serious strength and versatility. Available with your choice of M-LOK, 1913 Picatinny Rail, Sling Stud QD or A.R.M.S. 17S Style mounting connections, the bipod can be mounted to your accessory system of choice. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations.

Durable & Lightweight

The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions. Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market.

Innovative, Adjustable, & Easy to Use

Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”. An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality.

Functional Feet

Even in the stowed position, the Magpul Bipod has many useful features. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style.

• Material: sturdy and durable, lightweight aluminum structure, spring-loaded pawl can provide about 30 degrees of horizontal pan and 30 degrees of inclination, making the crosshair easy to target and tilt, it is very suitable for the terrain of Uneven use.
• Throw-bar quick-release mounting base, fits any standard 20mm Picatinny rail, and can be directly connected to the slide rail.
• Rifle bipod tactical legs can be adjusted from 6.5 inches to 9.0 inches, with an expandable length of 5. Robust rubber feet for stability.
• Quick release and adjustable pivoting mount make the bipods easy to install.
• Adjust the legs independently, in the positive lock position: retract backwards, form a 45-degree angle from front to back, and 90 degrees straight down. This bipod for shotguns is perfect for prone shooting. And securely locked in 5 positions through 180 degree arcs.

• Heavy-duty metal & aluminum construction to Meet Harshest Requirements,black color
• Adjustable height & foldable arms with spring tension [height adjustable range: 6 to 9 inches]
• Upgradeable dual mounting - Picatinny mount and swivel stud mount
• Upgraded supported by lockable thumb wheel for fine and precision adjustment
• Lightweight: Bi-pod is lightweight and can be quickly attach or detach from the rifle, compact and easy to take to go

User questions & answers

Question:	Can it go on a tactical Rail
Answer:	Yes, indeed. I am returning it because that metallic odor never left. I do not recommend this product.
Question:	Does the rbt4 come with the sling swivel and what size slind does it hold? thanks
Answer:	This product is unscented and in aerosol. Good product, I use for more then one year.
Question:	How heavy is it in ounces
Answer:	We've only ever used it on a gas stove, so I'm not sure.
Question:	Doez the rbt1 have a sling mount built in when the bipod is mounted to the pic rail
Answer:	No, it does not whistle.

Product features

Ohuhu 6-Inch to 9-Inch Adjustable Hunting Tactical Rifle Bipod

Nothing is more important than to keep your rifle steady when shooting or hunting to increase accuracy. Get a good partner for your rifle with Ohuhu 6-9 Inches Tactical Rifle Bipod and enjoy your activities.

This Ohuhu Hunting Rifle Bipod is made of heavy and duty material with an adjustable design which is a good choice for shooting activities.

Mount Tension Screw

The bipod is built with a mount tension screw which has deep enough threads to hold tension.

Five Settings of Leg Length

The 5 notches of the leg allow you to adjust the height of the bipod to your desire by slightly pressing the button.

Foldable Design

The springs on the legs make it easy to fold the legs up.

Premium Materials

Made from superior steel and aluminum with a non-rusting black anodized finish, the bipod is lightweight, strong and built to last.

Hardened Steel and Aluminum

Adjustable Leg Length

Other Features

• Adjust Leg Length Precisely
• Legs are notched with 5 settings for different length, you can precisely adjust the length;
• With return springs and leg release button, it is super simple to adjust the length.

• With return springs and leg release button, the leg length can be adjusted from 9" to 13"
• Made of hardened steel and aluminum, non-rust black anodized finish, the rifle bipod is duty and light weight.
• Adjustable leg length: 10 settings for different length, the bipod is ready to meet your needs.
• Quickly attach to or detach from the handguard using existing swivel stud.
• Super Light Weight Weighs under 0.78lb.

User questions & answers

Question:	How do i get this to adapt to an ar with a keymod rail
Answer:	Works very good with the Easy Bird with wobble and oscillating devices but I think for the Work Horse will be too small
Question:	Will this work on an msr 10 long range
Answer:	I have the Singke stack thrower with the wheels. The cover fits over it with room to spare.
Question:	How many slots on the picatinny rail does this take? Considering buying this with a quick release adapter
Answer:	Angle of elevation may be adjusted from zero to approx. 45 degrees. Oscillation is not adjustable. The two pieces supplied will allow fixed elevation or the "wobble" option.
Question:	Will it fit a marlin xt-22 with fixed sling hole
Answer:	Both units can run on a single deep cycle battery. No need for a separate battery for each unit. This wobbler really ups the game. You have no idea where it's going to toss a bird. Easy to install and use as well..

Product description

Specification

Material: Aluminum

Height: 6-9 Inches

Color: Flat Dark Earth

Mode: Sling stud/Picatinny



Feature

This bipod is made of Aluminum and steel, built to last.

External spring hold the legs strongly and deploy easily.

Notch legs can be extended from 6-9 inches for 5 level.

Press the button to release the leg with spring retract.

Rubber feet is adaptable with most rough geographies.



Package Include

1 x Bipod

1 x Picatinny Adapter

1 x Allen Wrench

• Made of hardened steel and aluminum, the bipod is duty and light weight.
• Adjustable leg length (5 settings) with return Springs, you could adjust the length to meet different needs when hunting.
• Press the button,the legs can eject fully and quickly. The length of legs can be adjusted from 6-9 inches.
• Durable with new design high quality that you can quickly attaches to sling swivel stud. Picatinny Adapter is included.
• Flat Dark Earth version is suitable for more tactical situations.

User questions & answers

Question:	Does this work with m-lok
Answer:	Yes. It comes with a m-lok adapter that allows Harris style bi-pods to work. Works surprisingly well too.
Question:	Can my 556 AR
Answer:	Will work if you have a picatinny rail or a swivel for shoulder strap.

Product description

The UTG super duty Bi-Pod with QD lever mount. Features: - heavy-duty full metal construction to meet harshest requirements - clever dual mounting - Picatinny mount and swivel stud mount - quick detachable lever lock in mounting base to fit on any Picatinny/Weaver rail - fully adjustable legs with 5 extension notches for most secured extension positions, further supported by lockable thumb wheel for fine and precision adjustment - foldable arms with robust external spring tension control - unique non-slip rubberized foot pads for any terrain or surface. Specifications: - panning: yes - posi-lock: no - Extendable legs: yes - foldable arms: yes - swivel stud mount: yes - Picatinny mount: yes - reversible Arms-Folding: no - stand: rubberized stand - material: steel/aluminum/rubber - height 6.0"- 8.5" - weight: 13.8 oz

• Country Of Origin : China
• The Package Height Of The Product Is 4 Inches
• The Package Length Of The Product Is 9 Inches
• The Package Width Of The Product Is 6 Inches

User questions & answers

Question:	will this fit to a ruger PC
Answer:	You will need an adapter. This bipod out of the box will only attach to a sling mount. I have used this mount on several rifles...http://www.amazon.com/Gg-G-Harris-Bipod-Adapter/dp/B0025TVDZK/ref=pd_sbs_sg_2?ie=UTF8&refRID=1ZQXTB1HV9H8BJZ6VV7Q.If you want a quick detach version, they are available as well.
Question:	Does this fit the Benjamin Bulldog
Answer:	The "S" stands for swivel. If on uneven ground, when looking down the rifle it will be slanted to the right "1 o'clock" or to left "11 o'clock". Rather than trying to adjust the legs to different lengths, you can simply twist or "swivel" the rifle back to 12 o'clock.
Question:	Any clearance issue with a 20 or 30 round mag? Most likely use will be sitting on a bench, possible laying prone from time to time
Answer:	It allows you to tighten the resistance of the swivel
Question:	does this bipod extend high enough for clearance of a 25 round magazine in a prone position
Answer:	Yes, this bipod pivots/swivels.

Product features

No-Nonsense Dependability

Bearing the Super Duty moniker, users can expect our TL-BP98Q to perform and fulfill every demanding expectation. Reinforced support bars, squared-off bipod legs, and integral spring anchors provide improved structural integrity against both adverse terrain and heavy recoil. A matte black corrosion resistant anodize is applied to stack up against the weather and nonslip rubberized foot pads keep the user securely planted shot to shot. Straight forward and externally spring tension controlled bipod legs securely deploy and stow away quickly while being less susceptible to dirt, sand, and other debris.