14 best boat toggle switches

Product description

1. Connector type: SPST, 2 terminal pin on/off. Power: 15A 250Vac/20A 125Vac package include: 5Pcs toggle switch, 5Pcs waterproof Boot cap.

• Connector type: SPST, 2 terminal pin on/off. Power: 15A 250VAC/20A 125VAC
• Material: Plastic and metal. Solid connection switch with waterproof rubber cap, more convenient to operate. Delicate appearance with strong construction. Look chic and high-end on your equipment
• Mechanical life: More than 50.000 cycles. Electrical life: More than 10, 000 cycles
• Easy to install: Mounting hole diameter: O12 millimeter. Each of the terminals has a machine screw for quick connections, but also easy to be soldered
• Package include: 5Pcs toggle switch, 5Pcs waterproof boot cap

User questions & answers

Question:	How would I go about hooking this up to toggle on and off a computer
Answer:	I have the 11 Pro Max and it fits well with room to spare.
Question:	Will these work for a 1992 290 Searay Sundancer
Answer:	Yes. The Internal dimension: Width 3-3/4in x Length 7in x Height 3/4in So most phones will fit inside the unit.
Question:	Will this work if you hool up a light directly to this switch and to the battery
Answer:	Internal dimension: Width 3-3/4in x Length 7in x Height 3/4in Most phones will fit inside the unit.
Question:	What is the actual hole size, inner diameter, of the switch? Other words, what pilot hole size will I be needing
Answer:	No it's only Bluetooth Bluetooth Audio, ,Wireless audio streaming

Product features

Specification:

Type: On/Off 2Pin.

Power: 15A 250VAC / 20A 125VAC.

Connector Type: SPST, 2 terminal pin on/off.

Material (External): Metal and Plastic.

Mechanical life: more than 50.000 cycles.

Environment temperature:- 25 degrees ~ 80 degrees.

Long lifespan Usage

The switch is flexible, you can toggle the handle manually for more than 50,000 cycles under normal use.

Heavy-duty Toggle Switch

The switch is built by high quality industrial material, widely applied to different Cars, Marine and used for Critical lights, Chassis lamps, Fog lamps, Dome lights.

Waterproof Silicone Cap

Screw on, tough, weather resistant rubber covers protect all toggle switches from moisture and dust when you applied it to a boat, yacht, vessels and other marine.

Product description

Product Specification:

Connector Type: SPST, 2 terminal pin on/off

Material (External): Metal and Plastic

Power: 15A 250VAC/20A 125VAC

Mechanical life: More than 50,000 cycles

Electrical life: more than 10, 000 cycles

Max. contact resistance: 50mΩ

Mounting hole diameter: Ø12mm

Environment temperature:- 25 degrees ∽ 80 degrees Connection Method: 2 pole (2 wire contacts to hook to) switch, red positive, the standard "hot" wire, black is negative

Package Content: 6pcs x toggle switch, 6pcs x waterproof boot cap cover

Features:

1.Made of high quality industrial material, ensuring long lasting durability.

2.Easy to Connect: Red is the standard "hot" wire. The black wire should be left continuous from the battery to the motor; Hook incoming +hot wire to one side and hot wire from light, motor etc that you are wanting to put power at, to the other (pole) side.

3.Weather resistant rubber covers protect all toggle switches from moisture and dust.

4.The switch is flexible, you can toggle the handle manually for more than 50,000 cycles under normal use.

5.Widely applied to boat, yacht, vessels and other marine.

Warranty:

24 hours sincere customer service

30 days money back guarantee

1 year free warranty

• Material: plastic and metal. Solid connection switch with waterproof rubber cap, more convenient to operate. Delicate appearance with strong Construction. Look chic and high-end on your equipment
• Connector type: SPST, 2 terminal pin on/off. Power: 15A 250VAC/20A 125VAC ,2 pole (2 wire contacts to hook to) switch, red positive, the standard "hot" wire, black is negative
• Mechanical life: more than 50.000 cycles. Electrical life: more than 10, 000 cycles
• Easy to install: Mounting hole diameter: O12mm. Each of the terminals has a machine screw for quick connections, but also easy to be soldered
• Waterproof Silicone Cap: Screw on, tough, weather resistant rubber covers protect all toggle switches from moisture and dust when you applied it to a boat, yacht, vessels and other marine

User questions & answers

Question:	Can these be used to control an outdoor light electrically powered
Answer:	Yes, it can be used as an ON/OFF switch in a 48V system. Don't pay attention to the useless answer from LE that it is only rated for 12V and maybe "ok for up to 14V". The switch is rated for 15A at 250V and 20A at 120V. So as long as you are not pulling more than 20 amps in your 48-volt system this switch will work fine.
Question:	Is this a 3 position switch or two? eg on/off/on or just on/off
Answer:	So long as it fits in the space for the existing switch, Yes, electrically it will work.
Question:	can this switch be used on 48 volt dc system to cut power from the battery bank to the dc converter
Answer:	That depends on if it has an ARE cap.
Question:	Can these be used for a light switch on a commercial oven
Answer:	Mine is 0010

Product description

Nilight 5 Gang rocker switch







Type: on-off rocker switch

Max Voltage: 12V

Rating: DC 12V/24V

Installation: Pre-wired

Loop Circuit: ON/OFF

LED Color: Blue

Operating Temperature: -25 degree -80 degree

Size: 165 * 40 mm/ 6. 5 * 1. 5 inch







Package Included:

1 x 5 Gang ON/Off Rocker Switch

4 x Stainless Steel Screws

• Single Light Switch: There are 5 single on-off switches of the 5 Gang switch. Each switch controls the its own LED device. Great for all types of circuit control
• The rocker, toggle switch panel is made of high quality aluminum panel and ABS material, which is durable and waterproof. Car switch panel is made by professional manufacturing and strict quality control which has a long serve time
• Installation is simple and can be mounted horizontally or vertically, Panel comes with Stainless steel mounting screws, Helps to install the switch panel firmly according to your needs.
• Short circuit/Overheat Protection: built in Overload protection, Suitable for most DC 12V-24V cars, UTV/ATV, trucks, trailer, RV, caravan, bus, marine boat, yacht, airplane, etc
• The switch fixtures of car, boat and yacht, such as led light bar, headlights, tail lamps, work lights, fog lights, auxiliary lights and so on.
• Fit Type: Universal Fit

User questions & answers

Question:	Would this handle power from household outlet
Answer:	input current：3~6A
Question:	what is on andoff? liek waht symbolism is off and fnn
Answer:	Will work on any voltage less than 250 volts and current less than 3 amps
Question:	could i use this as a killswitch on an electric guitar
Answer:	I don't know why they can't. I use them to control lights, bilge pump etc on my boat.
Question:	Does it work for 5v
Answer:	two position switch, on off

Product features

5 GANG 3 PIN Rocker Switch Panel

• Output circuit protection, overload protection & reverse polarity protection.
• Waterproof: Product is waterproof but submerged in water operation is not recommended.
• Easy to install, can be installed horizontally or vertically (Horizontally optional).
• Button Usage: for headlight switch, fog lamp switch, car refrigerator switch, car cleaners switch.
• Package Including 1 * 5 Gang 3 Pin On-Off Rocker Switch Panel 4 * Stainless Steel Screws

Multifunction Switch Panel Kit

On-off state of 5 electrical appliance synchronously controlled available, Marine-grade Construction and Waterproof: It adopt high quality aluminum and ABS material, Scratch-proof and Corrosion Resistant for all sockets debris- proof.

Single Light Switch

There are 5 single on-off switches of the 5 Gang switch. Each switch controls the its own LED device.Sleek & Contemporary design,It clearly see it at the dark, the blue led lights on when turned on.

Pre-wired

Panel is pre-wired,easy to install: can be installed horizontally or vertically (Horizontally optional). Put this Panel in to the switch hole, fix it with screws and then you can begin to use it . Easy and convenient.

Why Choose Us

Dedicated to communicate with our customers, we provide the superior-quality products and best service for each customer.

Quick Reply

Staffs in our service team have rich experience in after-sales service. E-mails will be quickly responded within 24 hours.

Professional Manufacturer

All Nilight products are made of carefully-selected materials and pass through strict quality check to ensure each of you get superior quality.

Product description

Input voltage DC12V/24VDimensions 7x 5 4x 3 2 inch Loop circuit ON-OFF Dual USB Charger 3 1A Dual USB -function DIY Stickers 50 pcs6 gang rocker switch panel1 x Multi-function 6 Gang switch panel4 x Fixing screws1 x Sticker Label1 x Plastic fixing frame.

• Multifunction switch panel 6 on/off 5pin blue LED rocker switch 6 circuit breakers for overload protection 12 volt cigarette socket 5V/2 1A & 5V/1A dual USB charger port and digital voltmeter great for all types of circuit control charging needs and voltage monitoring
• Pre wired switch panel with wiring instructions mounting screws and a multi-function stickers for DIY your specific need
• Short circuit/overheat protection built in overload protection suitable for most DC 12V-24V cars UTV/ATV trucks trailer RV caravan bus marine boat yacht airplane etc.
• Perfect for your machine heavy duty ABS plastic face panel all-in-one design can be DIY-used to control any vehicle electrical appliance
• Package include 6 gang toggle rocker switch panel and DIY sticker
• Fit type universal fit

User questions & answers

Question:	Can the glowing be disabled
Answer:	They are just a cheap steel screw. Don’t know the material. They started rusting after a couple of months so I replaced them with stainless steel.
Question:	What should my power source be for the panel? A fuse or the battery
Answer:	15amp
Question:	What material are the mounting screws made of
Answer:	NO Designed for 12 or 24 Voltage Maximum. Direct Current DC for the LED's. You could use with 12 VDC and have the 12V control a relay designed for Household current.
Question:	What's the amperage rating on each breaker
Answer:	1 is on, 0 is off

Product features

6 Gang Rocker Switch Panel with Blue Backlit

The 6 gang Multi-function rocker switch panel with rubber seals for the outdoor and marine tasks, short circuit /overheat protection, this circuit breaker panel will automatically cut off the power supply and help keep the electrical appliances safe .eg.If a circuit should trip, just push the black button under the protective hoot to reset. It is Suitable for Cars, Trucks, Marine Boats, Yachts, Trailers, RVs, Caravans, Campers, Buses, UTVs /ATVs, and Other 12-24VDC Applications.

Over Load Protection

6 gang rocker switch panel with rubber seals for outdoor and marine task, short circuit / overheat protection, this circuit breaker panel will automatically cut off the power supply and help keep the electrical appliances safe

Night Glow DIY Sticker

Package comes with an 132PCS night glow stickers with various patterns and words which meet your DIY needs and help you find the switch in the dark easily.

Easy Disconnection

The wiring harness on the switch can be easily disconnected by pressing down the clips.

Durable Components

Made of ABS and PC of premium quality, the switch is impact and heat resistant and it's flexible for turning on or off. prolonging the device life.

Dual USB Charger

• Dual USB charging ports with output of 3.1 A enables you charge 2 devices at high speed simultaneously.
• Input voltage: 12 - 24V DC
• Output voltage: 5V DC
• Output current: 3.1A (2.1A & 1A)

Cigarette Lighter Socket

• This is a universal 12V cigarette lighter socket, which is mainly made of durable flame-resistant hard plastic material for safe to use
• Input voltage: 12 - 24V DC
• Output voltage: 12V DC

• ★ MULTI-FUNCTION 5 GANG ROCKER SWITCH PANEL - The switch panel is assembled by Dual USB Charger Socket(2.1A & 2.1A), LED Digital Voltmeter, 12V Cigarette Lighter Socket Power Outlet, Blue Power Indicator, 5 ON-OFF Toggle Switches and 15A Fuses, which can meet your various needs. The switch panel is pre-wired, includes 4x stainless steel screw, 1x pre-printed diy sticker. Product Size: 5.9 x 4.1inch (15 x 10.5cm).
• ★ INDEPENDENT ON-OFF TOGGLE SWITCH - It can control the on and off of 5 devices simultaneously, suitable for car headlights, fog lights, warning lights, car refrigerators, car vacuum cleaners, etc. Energy-saving and device protection. All sockets and switches on the panel have blue power indicator lights, allowing you to check the connection status at any time and easily find it in the dark.
• ★ WIDE APPLICATION - Widely used in 12-24V marine boat, car, RV, vehicles, truck, trailer, yacht, launch pleasure-boat, off-road, caravans, etc. The usb socket with dual output 5V/2.1A charging port, suitable for charging mobile phones, GPS, digital cameras, pads and other USB accessories. The 12V power outlet works with any standard cigarette lighter plug or lockable marine plug.
• ★ MULTIPLE SAFETY PROTECTION - It is certified by UL, CE & ROHS, charging safety, stable current, and no risk of overheating or damage to the device. Real-time digital voltage display helps to monitor vehicle’s electrical safety. The pre-wired design 5 Gang rocker switch panel with 15A fuse has circuit protection, overload protection, reverse polarity protection. Multiple protection, safe to use.
• ★ PREMIUM QUALITY - Made of high and low temperature resistant flame retardant eco-friendly material. Premium aluminum panel make it stronger. There will hardly cause any issue like produce fracture or deformation phenomenon. IP65 waterproof grade, the switch panel with protective cap protects against rain and dust, keeping the inside of the socket clean and dry when not in use. Any problem, please feel free to contact us.

User questions & answers

Question:	Will this drain my trailer battery? I have an enclosed trailer with battery, will it only draw power if something is plugged in? It turned on
Answer:	battery and two good connections and 2 grounds no fuses as each switch is fused in the assembly makes it very easy

Product features

Package Included:

• 1* Multi-function Switch Panel (5 Gang Toggle Switch + 2.1A & 2.1A Dual USB Socket + LED Voltmeter + 12V Cigarette Lighter Socket)
• Pre-wired 16AWG Tinned Copper Wire
• 5* 15A Blade Fuse & Fuse Holder
• 4* Stainless Steel Screw
• 1* Pre-printed DIY Sticker
• 1* Manual

PREMIUM QUALITY

Material: Aluminum plate, ABS, Nylon

Made of high and low temperature resistant flame retardant environmental protection material.

Premium aluminum panel make it stronger.

IP65 waterproof grade, the switch panel with protective cap protects against rain and dust, keeping the inside of the socket clean and dry when not in use.

MULTIPLE SAFETY PROTECTION

The pre-wired design toggle switch panel with 15A fuse has circuit protection, overload protection, reverse polarity protection. Multiple protection, safe to use.

Note:

The switch panel is pre-wired.

All wires with fuse are connected to the positive pole of the electrical appliances.

INDEPENDENT ON-OFF TOGGLE SWITCH

It can control the on and off of 5 devices simultaneously, suitable for car headlights, fog lights, warning lights, car refrigerators, car vacuum cleaners, etc.

Energy-saving, it doesn't drain any power when switched off.

Device protection, expanding lifespan of the device.

2.1A & 2.1A Dual USB Charger Socket

LED Light Color: Blue

Working Voltage: 12-24V DC

Output Current: 4.2A(2.1A+2.1A) / Output Voltage: 5V DC

Suitable for charging mobile phones, GPS, digital cameras, pads and other USB accessories.

It is certified by UL, CE & ROHS, charging safety, stable current, and no risk of overheating or damage to the device.

Blue LED Digital Voltmeter

Range of Voltmeter: 6-30V

Real-time digital voltage display helps to monitor vehicle’s electrical safety.

All sockets and switches on the panel have blue power indicator lights, allowing you to check the connection status at any time and easily find it in the dark.

12V Cigarette Lighter Socket

The 12V power outlet works with any standard cigarette lighter plug or lockable marine plug.

Working Voltage:12-24V DC

Output Voltage:12V DC

• 【IP65 Waterproof】Kohree marine boat switch panel comes with a special rubber steel-cap, splash-proof panel and anti-seepage rubber ring. Not worry about water when using them in boat or ship.
• 【All-Round Protection】Built-in 2 pcs 15A fuse, this power socket breaker provides over-load, over-heat, over-voltage, under-voltage and short-circuit protection, ensuring the complete safety of the switch in case of any power failure.
• 【Flexible Design】:Pre-wired all-in-one design. Comes with sticker label, you can decide the decals for your switch and keep your labels organized. DIY your vehicle bus boat truck touring cars easily.
• 【Work for Many Purpose】Switch panel to control the universal electrical equipment in the vehicle: headlight, fog light, car refrigerator switch, car vacuum switch, external car equipment, cigarette lighter, etc.
• 【100% Satisfaction】Kohree offers various type of switch panel: 6 gang--ASIN: B07S78M9XK ; Aluminum 6 Gang-- ASIN: B08C2CW1TP . If you have any problem with the product, please feel free to contact us.

User questions & answers

Question:	Works on 32 volt
Answer:	Dear Nicholas,Yes. The panel supports Max. power is 240W.Hope the above helps.
Question:	What size hole needs to be cut
Answer:	Dear Bill,We are sorry to hear about the problem you met. Please contact us by e-mail (click on 'Contact Seller') so that we can provide help on this. Best wishes! Kohree Customer Service Team
Question:	Will this run a 75 watt light bar
Answer:	I wired mine so that the first rocker was the power switch for the rest of the rockers. If this switch is in the off position, there is no power to any of the other ones. So there will be absolutely no Battery Drain. This switch itself uses no power when off. When On, the the only power Drain is from what you've wired to the other switches Which must be pushed to the On Position.
Question:	No wiri g diagram in Package where can I find it
Answer:	The bottom one can, as shown in the video demonstration. I think you just connect one wire to a different pin. I haven't tried myself.

Product features

Why choose Kohree?

This panel came pre-wired, saving your great effort and time to install. Just fix it to the switch hole with screws.

Package Includes:

1* Switch panel

1* Wiring diagram

1* Rubber washer

6* Screws

2* Stickers

• Specially manufactured by Carling Technologies for use in Blue Sea Systems" WeatherDeck Panels
• When mounted with a WeatherDeck Toggle Switch Boot Rated IP67-temporay immersion for 30 min
• Nickel-plated brass and phenolic non-corrosive construction
• Action: OFF-ON. () = Momentary
• Maximum Amperage: 15A at 125V AC/15A at 12V DC/10A at 250V AC
• Manufacturer Part Number: 4150-BSS

User questions & answers

Question:	do you have electrical reset switches for an air compressoe
Answer:	The manufactures website. You would not ground this switch it is only a make or break connection (on/off)https://www.bluesea.com/products/4150/WeatherDeck_Toggle_Switch_SPST_-_ON-OFF
Question:	Which switch do I buy to wire heated handlebar grips that have off-low-high as the factory settings
Answer:	The diameter is 7/16" round and 1/2" long with a backing nut to tighten to the thickness of the material that it feeds through. You need to allow 1/8" of the barrel to protrude past the material the switch is mounting into to allow the finishing nut to screw onto the end of the barrel. The electrical portion of the switch is 1" long x 5/8" wide x 1/2" deep with two electrical terminals. 1/2" deep does not include the electrical terminals its approximately 1" with the electrical terminals.
Question:	do you ground it? only has 2 connections on back
Answer:	Dear Juan,No. This panel is universally fit for DC 12-24V cars, boats, trailers, etc. Hope this will be helpful to your purchase.
Question:	what is the barrel diameter and other dimensions
Answer:	Follow the instruction: 5.3in*3.5in (135mm*90mm).

Product features

Blue Sea Systems Weatherdeck Toggle Switches

• Specially manufactured by Carling Technologies for use in Blue Sea Systems' WeatherDeck Panels
• When mounted with a WeatherDeck Toggle Switch Boot Rated IP67-temporary immersion for 30 minutes
• Nickel-plated brass and phenolic non-corrosive construction

Product description

Specification 3 Gang 12V/24V 5Pin Rocker Switch Panel Power Input DC 12V-24VAluminum Panel Pre-wired Package Included 1 x Rocker Switch Panel 4 x Stainless Steel Screw1 x DIY stickers Universal for all cars motorcycles buses boats marine trailers jeep etc.

• 3 gang rocker switch aluminum panel with DIY sign stickers can customize these switches as your demands to remind you while using With pre-wired wiring harness for you to easily install in both 12 volt and 24 volt vehicle yacht ship caravan truck etc.
• Safe and durable built with fuses easy replace and can protect the panel from over-heating over-current over charging and short circuit
• Panel size: The aluminum panel dimension length x width x high (3.8''x2.6''x3.4''); Cutout dimensions (2.9''x1.5''x3.5'')
• Quality assurance made of strengthened aluminum panel and well-conductive pins ensure long lasting durability highly optimized for general use and will give you a pleasant experience
• Package include 1x 3 gang switch panel 1x screw sets 1 set of DIY stickers

User questions & answers

Question:	I have a manual bilge pump that i want to wire to this. i don't want to use a float switch. this will be the only switch. how do i wire it
Answer:	Good for finition and easy to work good products 👍
Question:	What terminal is used for an accessory wire? Positive circuit, so it’ll only work with the key turned on
Answer:	3/8 to 1 3/8 inch
Question:	If the ground wire attaches to the chassis, where do I connect the ground coming from the light bar
Answer:	•Drives up to 3-1/2" x .162" (16d) nails
Question:	I have a trolling motor with a 40 amp max. Could I split this over the 3 switches to use as an on/off switch
Answer:	Owned going on two years - used on three patio/decks, residing house, framing/ siding two small shops, and several DIY small projects, and two different yard wood fences …. and other than less than handful nail jam ( easily cleared ) … what most people may not like is it is heavier than a lot of other nail guns … so a lot of up and overhead nailing … could tire you out. Previously owned a Milwaukee (almost as heavy - good gun also) - so was use to heavier gun weight.

Product features

3 Gang Rocker Switch Panel with Blue Backlit

Nilight 3 Gang rocker switch aluminum panel with DIY stickers, can customize these switches as your demands to remind you while using. With pre-wired wiring harness for you to easily install in both 12V and 24V vehicle, yacht, ship, caravan, truck, etc.

Pre-wired wiring harness

Rocker switch panel with pre-wired wiring harness for you to easily install in both 12V and 24V vehicle, yacht, ship, caravan, truck, etc.

Easy Disconnection

The wiring harness on the switch can be easily disconnected by pressing down the clips.

Night Glow DIY Sticker

Package comes with an 132PCS night glow stickers with various patterns and words which meet your DIY needs and help you find the switch in the dark easily.

5 PIN Switch

• Material: Superior ABS+PC
• Switch Mode:ON-OFF,5 PIN SPST
• Backlit:Blue
• Output: 12V/24VDC

Quality Panel

Made of strengthened aluminum panel and well-conductive pins, ensure long lasting durability,highly optimized for general use and will give you a pleasant experience.

DIY Sticker

Products also shipped with 1 PCS of DIY sticker(50 patterns), can be DIY-used to control any vehicle electrical appliance for your specific need.

Wide Application

Product is suitable for controlling all electronic equipment on board.Available for upgrading headlights switch, fog light switch, wide light switch, car refrigerator switch, car vacuum cleaner switch replacement.etc.

Car Electronic Device

Product is suitable for UTVs and ATVs.

Installation is simple and can be mounted horizontally or vertically. You can even use it at -25°(Min) or 80°(max).Suitable for most DC 12V-24V cars, UTV/ATV, trucks, trailer, RV, caravan, bus, marine boat, yacht, airplane, etc.

Use on Marine Boat

Marine-grade Construction and IP65 Waterproof: It adopt high quality Aluminum panel, Scratch-proof and Corrosion Resistant, with rubber sealed cap for all sockets dust-tight and debris-proof.

Product description

❶ Rocker switch panel and the slot waterproof hat, rubber sealed cap make it watertight

❷Two 5V USB ports are sufficient to meet power charge demand

❸Digital voltage display helps user to monitor machine electrical safety

❹Universally fit for both 12V and 24V vehicles, such as marine, boat, caravan, bus

❺Easily Installed by its pre-wired wiring harness

❻Can be DIY to control any vehicle electrical appliance

 

 

Specification:

● Certificate: CE Approved

● Rating: 12V/24V

● LED Color: Blue

● Fuse: 1.5A

● Mechanical Life: 10000-20000 Cycles

● Product type: Marine Boat Car DIY Modify Switch Panel

● Function: With Fuse, 12V Power Voltmeter and USB Socket

●Heavy duty ABS plastic face panel

●Dimension: 6.69x3.93x3.54inch

 

3-bit Digital Voltmeter Disply:

Help user pay attention to the voltage situation, ensure the Equipment Safety

 

Rocker Switch:

Loop Circuit: ON-OFF

Maximum power: 240W

Input voltage: DC12/ 24V

Protection class: IP65

 

Dual USB Port:

-Working voltage:12-24V

-Output current:3.1A

-Output voltage:5V

 

 Wiring instruction:

●The red and blue wire---Connect to the cathode of the storage battery

●The black and yellow wire---Connect to the anode of the storage battery

Effortless to install: Pre-wired needed wiring kit for Simple Flush Mount and Breeze Installation, black to ground and red to hot wire (Hint: connect the voltmeter located wire to a separate toggle switch in case of drained battery)

 

Package Included:

●1x Switch Pane

●1x Wiring Diagram

●1x Stainless Steel Screws(6 pieces )

• ABS
• [IP65 Waterproof]: Genuine Marine 6 switch panel has splash-proof panel face, water resistance caps and anti-seepage rubber ring, gasket.
• [Extensive Application]: Blue Led lighted Rocker switches are widely applicable for marine boat car rv vehicles truck yacht launch pleasure-boat offroad to control device.
• [Fully functional]: This 12V/24V electrical panel has digital voltage display, Blue LED light indicator, waterproof board, 12V charger socket and double 5V 2.1A USB power interface.
• [Flawless Design]: Blue LED lighting switches and reminder light don't glare at night, perfect for your machine. Heavy duty ABS plastic face panel. Pre-wired All-in-one design, can be DIY-used to control any vehicle bus boat truck touring cars.
• [Multi-layer Protection]: with 3 pcs 15A Fuse - output short circuit, overload, reverse polarity protection. Safely protecting with anti-reverse, very convenience for using. Pre-wire to protect the switches and function device. You needn't connect additional fuel box for it.

User questions & answers

Question:	amp. Is 1 slot 1 amp and 1 slot 2.1 amp
Answer:	Assuming you use the red to attach to the positive terminal (+12vdc) then the earth ground will hook to the negative terminal. There is never an earth ground (as used on AC circuits) on a DC system.
Question:	Is this salt water proof
Answer:	yes you can. my john boat has just a 12volt battery, and am able to hook up all six. hope this help
Question:	Why is there an earth ground goung to switch
Answer:	Put "Electrical reset switch for air compressor" in your search engine and it will tell you who has them.
Question:	Since I don't have a keyed switch on my boat can I hook everything up to a single rocker switch or just the yellow and blue wires on the 6 gang
Answer:	Spdt, On-off-on . wiring connections, assuming your grips have three wires, one would be ground and wired to ground. other two wires would be hi and low circuits in grips and would be connected to the two outside poles of switch and battery power connected to switch center pole.

• 【Control of Different Accessories】---Our 6-gang switch box can control four accessory switches at the same time,bringing great convenience and keep tidy.It is good choice for you to control work light,light bar, fog light, tail light etc, according to your needs
• 【Simplified Wiring】---Only one power and ground wire per circuit. And four color-coded accessory wires has marked letter, which is easy for you connect the wire to the power supply and accessories separately
• 【Superior Design】---Durable aluminum housing, wear-resistant, durable, waterproof and dustproof, better protect internal wires.With adjustable mounting bracket,you can adjust the suitable angle according to your needs,seamlessly blend into your vehicles interior
• 【Red LED Light Indicator】---With the LED indicator, lets you know the panel switch is energized and whether working properly. And the LED indicator on the button allows you to clearly know the circuit condition of each accessory
• 【Safety Protection】---Two external 40A fuse can protect the circuit. It is convenient to replace when the fuse is damaged. And heavy gauge wiring make it more durable and safer

User questions & answers

Question:	Does this 4 switch unit have built in relays? or it just powers straight through the swith itself
Answer:	i am unsure about a relay, however; there are two fuses which will blow if too much voltage goes through. So far I have had no issues, but i am also only running 3 lights.
Question:	If i want continuous power but do not want the power indicator light on what should I do? Will it kill the battery
Answer:	I believe.5 amp and 2.1 amp
Question:	Hello, Is there an relay built in for safety
Answer:	This is supposed to be a marine switch panel. As far as salt water proof I doubt there is such a thing?

Product features

SPECIFICATION

• Max Switching DC Voltage: 12V DC
• Max Switching DC Amperage: 80.00
• Contact Resistance: < 50 mohm
• Number of Prongs: 6.00
• Throw Type: Single
• Terminal Type: Wire Leads
• Switch Function: ON-OFF,Light Color: Red
• Actuator Type: Rocker
• Mounting Type: Bracket-Mount
• Terminal Material: Tinned Copper,Housing Material: ABS Aluminum

Simplified Wiring

Only one power and ground wire per circuit. And four color-coded accessory wires has marked letter, which is easy for you connect the wire to the power supply and accessories separately

Red LED Light Indicator

With the LED indicator, lets you know the panel switch is energized and whether working properly. And the LED indicator on the button allows you to clearly know the circuit condition of each accessory

Adjustable Mounting Bracket

With adjustable mounting bracket,you can adjust the suitable angle according to your needs,seamlessly blend into your vehicles interior

Safety Protection

Durable aluminum housing, wear-resistant, waterproof and dustproof, better protect internal wires.Two external 40A fuse can protect the circuit. It is convenient to replace when the fuse is damaged. And heavy gauge wiring make it more durable and safer

Control of Different Accessories

Our 6-gang switch box can control four accessory switches at the same time,bringing great convenience and keep tidy.It is good choice for you to control work light,light bar, fog light, tail light etc, according to your needs

Product description

Orgain Collagen Zero Protein Powder supports joint function, strong hair & nails, muscle recovery, and radiant skin. It is more versatile than collagen pills and can be mixed in anything from water, coffee, smoothie mix, or foods.Orgain Collagen Zero Protein Powder supports joint function, strong hair & nails, muscle recovery, and radiant skin. It is more versatile than collagen pills and can be mixed with anything from water, coffee, smoothie mix, or foods.

• Multi Functional Switch Panel: Product integrated with dual USB port, digital voltmeter, 12V outlet, waterproof board and 5 on / off rocker switches, this 12V/24V electrical panel can meet your various needs
• Safety Protection: Real time LED voltmeter shows the status of the voltage. Pre-wire design with 15A fuse providing you with an overload, over-current and short circuit protection.
• Wide Application: This switch is suitable for 12V-24V Systems and widely applicable for most DC 12V-24V cars, UTV/ATV, trucks, trailer, RV, caravan, bus, marine, boat, yacht, airplane, etc. Convenient to install with pre-wired and four assemble screws
• IP65 Waterproof: The waterproof marine switches perform well in a marine environment due to their splash-proof panel, water resistant caps
• Package includes: Pre-Wired switch panel, DIY Stickers and 4 screws
• Fit Type: Universal Fit

User questions & answers

Question:	Are the labels glow in the dark
Answer:	Sorry, but I have not installed this panel yet, but the way it is wired does not appear to turn off. Each 5 switches has a fuse. There is a Red and Black separate for powering the others. You could add a main power switch for those. I hope this helps.
Question:	what are the dimensions of the product
Answer:	The switches are wired with 16ga the insulation looks thicker, you have to use relays for light or any electronic connected to the switches, dont run a light straight to switches. I have a 30" led bar light connected with relay and thecwire never gets hot.
Question:	Is one switch dedicated to turning off/on the voltmeter display
Answer:	No relays
Question:	what gage wiring is it
Answer:	The indicator light will not kill the battery. One of our jeeps has sat all summer and the battery is full, cranks right over even with the light on constantly.

Product features

Nilight Multi-Functional 5 Gang Switch Panel

Product integrated with a dual USB charger, digital Voltmeter, 12V outlet, waterproof panel, and 5 on/off toggle switches, this 12V/24V electrical panel can meet your various needs and widely applicable for most 12V-24V DC cars, UTVs/ATVs, trucks, trailers, RVs, caravans, buses, marine boats, yachts, airplanes, etc.

ON-OFF Toggle Switch

• This round toggle switch are available in a variety of styles made especially for 12 volt application
• Type: 3 Pins with LED SPST: ON-OFF
• Working voltage: 12V DC

Digital Voltmeter Monitor

• Material: Aluminum Panel +Superior ABS&PC
• This voltmeter help you keep an eye on battery voltage maintenance of the battery, extended battery life to prevent accident caused by battery problems

Cigarette Lighter Socket

• This is a universal 12V cigarette lighter socket, which is mainly made of durable flame-resistant hard plastic material for safe to use

Dual USD Charger

• Dual USB charging ports with single output of 2.1 A enables you simultaneously chargers 2 devices at high speed
• Input voltage: 12 - 24V DC
• Output voltage: 5V DC
• Output current: 4.2A (2.1A &2.1A)

Quick Reply

Staffs in our service team have rich experience in after-sales service. E-mails will be quickly responded within 24 hours.

Why Choose Us

Dedicated to communicate with our customers, we provide the superior-quality products and best service for each customer.

Professional Manufacturer

All Nilight products are made of carefully-selected materials and pass through strict quality check to ensure each of you get superior quality.

Product description

Specification:

Type: LED Rocker Toggle Switch

LED color: red

Switch actuation style: rocker

Rating: 20A 12V DC (Working for 9V~12VDC)

Operating Temperature: -25 ~+85

Electrical Life:10000 Cycles

Size: 1.38*0.59*2.36in (35*15*60mm)

Weight: 0.84oz (24g)

• FLEXIBLE & DURABLE: You can toggle the handle manually to "ON" position or "OFF" position. Long lifespan up to 10,000 Cycles.
• SWITCH EXTENSION: This LED toggle switch can be used for various additional electric equipment inside and outside the car, such as lights, chassis lamp, fog lamps, dome light etc.
• WIDE APPLICATION: Suitable for almost any motorized vehicles such as cars, trucks, boats, atvs, utvs, airplanes, motorhomes, racecars, golf carts or any off road vehicle.
• EASY TO INSTALL: Designed with Rocker style, easy to operate. Mounting hole diameter: 12mm. Power: 20A 12V DC (working for 9V-12V DC).
• WHAT YOU GET: 5 x LED Rocker Toggle Switch. We provide a 12-Month Worry-free warranty. If you have any questions, please don't hesitate to contact us.

User questions & answers

Question:	how should these be connected with 3 terminals
Answer:	That's where mind are going but I'm pretty sure they are not totally water proof. Neither are my old ones and they lasted 24 years
Question:	does it make a satisfying noise when flicked
Answer:	The toggle head size is 19.9mm. And the pin height is 10.3mm. Hope that these will help you.
Question:	Will this work on a boat console that would potentially be exposed to rain and lake spray
Answer:	No
Question:	how long is the threaded portion of the switch
Answer:	5 7/8” wide 4 1/8” high Roughly 3 1/2” deep to clear wires

Product description

Product description beauty and fashion Nilight 5 pin rocker switch is a SPST designed (single pole single throw) on-off switch with illuminated LEDs, you can easily turn on or off the lights as you like. The surface cover is streamline curved design with laser-etched patterns onto it. Built-in LED light emits soft light to light up the pattern when the switch is powered on. You can easily find the illuminated sign in a dark environment, no need to fumble for the switch in the dark anymore. Application: the switch fits into common square holder panel housing for most car, Jeep, 4X4, SUV, ATV, UTV, motorcycle, boat, truck, Wrangler and other off-road vehicles. Rated at 20A 12V DC and 10A 24V DC, it is usually used together with wiring harness to control the LED light fixtures of many kinds of vehicles, such as LED light bar, LED work lights, Fog lamps, driving lights, headlights, taillights, off road lights, etc. After-sales service: 2 years and professional customer service any questions, please feel free to contact us.

• Easy to install and use: 5 pin on-off rocker switch with SPST design (single pole single Throw), simple installation, freely turn on or off the light
• Cool illuminated light: built-in two premium LEDs Emits soft light to illuminate the patterns, easy for you to find the switch in the dark
• Sturdy and durable: made of high-quality plastic and well-conductive pins; laser-etched pattern, not easy to fade away
• WIDE APPLICATION: standard 5 Pin switch, rated at 20amp/12v and 10amp/24v, available for upgrading most wiring harness to control Led Light Bar, Led Work Lights, Fog Lamps, Headlights, Taillights and Auxiliary Lamps, etc.
• Package included : 1x 5 Pin Rocker Switch, 1x jumper wires set, 1x Diagram

User questions & answers

Question:	How do the pins need to be wired for the led light on the switch to only light up when ignition is turned on
Answer:	You can eliminate the 2 pins on the right side when facing you. Just run the top ground, constant power in the middle, signal/relay on the bottom. you don't have to use the jumper wires it comes with. The only thing the "Light Bar" word will not light up, but when turned on the light bar symbol will light up and so will the light.
Question:	What is the IP rating of these switches? Can they be used on the open deck of a boat
Answer:	Place each marking in your basket 1 at a time
Question:	I got everything connected to my light bar but the blue lights stay on on switch even w/ignition off. Is there a way to fix that
Answer:	12 v positive, load and ground for indicator
Question:	How do I order 6 switches with different markings at one time
Answer:	very little noise

Product features

Product Description

Material: Superior ABS+PC; Rated at 12V 20A and 24V 10A DC.

SPST design (Single Pole Single Throw); Built-in 2 LEDs, laser-etched pattern.

Mounting Hole Size: 1.43"(37mm) x 0.84"(21.3mm).

Application:

Fits for most cars, SUV, ATV, UTV, 4X4, motorcycle, truck, Jeep Wrangler, boat, yacht, and other off-road vehicles.

Mainly used for controlling LED light bar, LED work lights, fog lamps, driving lights, headlights, taillights, off road lights, boat light, etc.

Durable In Use

The switch is very flexible for turning on or off. It can stand up to 10,000 times pressing under normal use.

Easy Installation

This switch is simple to install, product comes with a wiring diagram which make it easy to wire the jumper wires in two seconds.

Premium Jumper Wires

The jumper wires is made of high quality 14 gauge wires.

The Tin-plated copper terminals on the wire is of good stability, wear resistance, corrosion resistance, which improves the oxidation resistance of copper and maintains its conductivity better.

Excellent Product

Made of ABS and PC of premium quality, the switch is impact and heat resistant. all patterns are laser etched directly onto the switch surface to ensure long lasting durability.

Use on Marine Boat

Marine-grade Construction and IP65 Waterproof: It adopt high quality Aluminum panel, Scratch-proof and Corrosion Resistant, with rubber sealed cap for all sockets dust-tight and debris-proof.

Wide Application

Product is suitable for controlling all electronic equipment on board.Available for upgrading headlights switch, fog light switch, wide light switch, car refrigerator switch, car vacuum cleaner switch replacement.etc.

Car Electronic Device

Product is suitable for UTVs and ATVs.

Installation is simple and can be mounted horizontally or vertically. You can even use it at -25°(Min) or 80°(max).Suitable for most DC 12V-24V cars, UTV/ATV, trucks, trailer, RV, caravan, bus, marine boat, yacht, airplane, etc.

• 15 Amp @ 12 Volt.
• 3 Prong.
• Corrosion resistant brass switch and Aluminum Plate.
• Accommodates up to 1" thick panel.
• Panel Dimension: 1 3/4" Wide X 2 1/2" High.

User questions & answers

Question:	Custom laser etching? Id like to run two of these side by side, one for Hatch and one for Trim
Answer:	NO, this is a "return to center" spring actuated switch. It does not stay in the "up" or "down" position. SO NO. Momentary-OFF-Momentary.
Question:	Can I remove the aluminum plate and just install the switch directly onto my 1/4" fiberglass dashboard
Answer:	I used it on a 12 volt circuit. I put it in as the trim switch for my 99 Johnson 50hp. No issues at all. Sold the boat to my buddy sixty months ago. It’s still working like a champ.👍🏻
Question:	Can i use this for a anchor switch for my boat
Answer:	You have to find a power wire that is only connected to the ignition switch.
Question:	Picture shows 250v 15amp. Will this work in a 12 volt marine application ? Is it waterproof
Answer:	I don't know that.but I have them in my sxs and it gets wet all the time...no issues