12 best inflatable marines

Product description

Inflatable Boat Sealant Kit Stops Slow Leaks! Inland Marine Sealant is specially formulated for use with inflatable boats, rafts and tow toys. This sealant forms a bond with the interior fabric of the inflatable, stopping or "sealing" slow leaks and preventing future leaks from developing. In one easy step, leaks are cured from the inside, which are virtually impossible to find from the outside. Inland Marine Sealant is the only product of its kind which allows for future deflation of your inflatable (for storage, etc.) without the skin sticking to itself and making re-inflation virtually impossible. This is why Inland Marine Sealant has earned a 5-Star product rating from West Marine, and is has been used by the US Navy and Yachters worldwide since 1986. If you are having a difficult time locating the leak in your raft, kayak, tow toy, or dinghy, you need to use Inland Marine USA Sealant, because our Sealant is especially helpful in fixing those difficult slow leaks that are not easy to find. Our Sealant provides a strong bond that should last for years when applied according to the easy instructions. It will seal the leak(s) and keep your inflatable firm for years to come. And Inland Marine USA Sealant can be used multiple times, so if your inflatable develops a new leak weeks or years from now, you can use the sealant again!

• Seals leaks from the inside
• Long-lasting
• Allows for future deflation

User questions & answers

Question:	will this bond to hypalon? i have an old avon explorer with an impossible leak on the seam of the rear tube where it meets the floor
Answer:	Yes
Question:	How many ounces in a bottle? And how many ounces needed per side for a 12’ dinghy
Answer:	I split my in 3rds because i had 3 chambers.
Question:	How do you dry the inner tube to use this sealer
Answer:	Open the air valve and use a shop vac to suck out the water
Question:	Are these sturdy, good quality
Answer:	Works great sealant stopped the slow leaks.

Product description

OPTIMAL USE:

For the best results when gluing, the relative humidity should be less than 60% and ambient air temperature should be between 18C to 25C (65 F to 77F) and not in direct sunlight. Clean the patching area on the boat as well as the contact side of the patch, it is best to use M.E.K. (Methyl Ethel Ketone) patching solvent and cleaner.

WARNING:

Product Content Polyurethane. M.E.K. Harmful if inhaled; eye irritations. May cause sensitization if inhaled. Repeated exposure may cause skin dryness and cracking; Keep away from sources of ignition-No smoking; Don’t breathe vapor / spray. In case of contact with eyes, rinse immediately with plenty of fresh water & seek medical attention. Use Only in well-ventilated areas. Don’t smoke or work near open flames, sparks or other heat sources.

STORAGE:

Glue and all chemical materials are dangerous goods. Keep out of Reach of Children. Store in a cool and safe spot and keep the product quality for up to 3 years.

• Mix 5% hardener (treatment) to the glue before use. Maximum add 10% hardener when in Cold Weather 10C-15C or High Humidity 50-75%. Do NOT exceed a mixture of 10% to the glue. M.E.K. is the thinner for PVC glue. If the glue hardens, you can add up to 10% MEK to the glue to reactivate the glue. Glue mixed with hardener can be kept for up to 6 hours.
• Use a small painting brush to apply 1-3 layer(s) glue on both material surfaces. Wait 5 minutes between applications to allow glue to dry and then attach the two pieces of material together. Once you have applied the patch, work from the center out with something like a teaspoon to force out any air bubbles and then apply pressure to the repaired area for at least 24 hours. Wait 48 hours for the glue to cure before using.
• PVC Glue can be used as one part. For a better result, please do 2 Part glue (glue and hardener) to ensure the overall quality of the repair and extend the life time of the bonding. For any repairs related to air leaks, please use 2 Part Glue. Glue and hardener sealed in the bottles can be kept up to 3 years
• Instruction of Glue Layer applied: 1-2 layers on new fabric surface; 2-3 layers on old fabric surface; 3-4 layers for wood or plywood surface; 2-3 layers for parts or aluminum surface. (The fabric of Hypalon boat, it must has a coating layer on the fabric, sanding the boat fabric to get rid of this coating is a must before gluing.)
• Only mix the amount of glue you require for the repair. Seal the bottle right away and store it in a cool area so that it may be used again. If the hardener turns to crystals or gets sticky, it is no longer usable. To clean the area that needs to be repaired, use Methyl Hydrate, Acetone or MEK.

User questions & answers

Question:	is the hardener is the same fiberglass hardener
Answer:	They are the standard crank thread. Remember there is a left and right side.

Product description

Life's better when you leave the shore, and the Aqua Marina Rapid 9.6-Foot iSUP Stand Up Paddleboard can prove it. Whether it's a still lake or a rocky river, this board can handle whatever waves life throws at it-- just like you. You'll be able to easily inflate this board and take it out on the water to find adventure, or even just to discover your own personal peace. And with an action camera mount kit, you'll be able to document every second of your excursion. Just set up your camera, and hit record. That way you can save your memories for a rainy day, or just upload them online and make all your friends jealous. What are you waiting for? Get out of the house and onto the waves with the Rapid paddleboard!

• Handles whatever waves you throw at it
• Easy to stay stable as you go against the water
• Diamond grooving foot deck adds to stability as you stand on the waves
• Comes with action camera mount kit so you can capture every moment
• Carry handle on the center board makes it easy to carry to and from the shore

Product description

This is not the paint your Daddy used on his boat! (And not anywhere close to the paint sitting next to it on the shelf at your marine store.) Inland Marine Topside Paint is specially formulated to have the elasticity and UV resistance required for use with inflatable boats. Because inflatable boats expand in the hot sun and contract at night in the cooler temperatures, constantly flexing, ordinary paint or vinyl stick-on numbers will not stay on an inflatable boat for more than a few weeks. But we don't stop there! We mix our Sealant in our Topside Paint to further enhance the airtight integrity of your inflatable. Inland Marine Topside Paint is available in Red, International Orange, Yellow, Royal Blue, Grey, Black or White. (With changing weather conditions in many areas boaters frequent, International Orange or Yellow makes it easy to find your dinghy at the dinghy dock if a "Rum Front" comes through while you're ashore.)

• Specially formulated to have the elasticity and UV resistance required for use with inflatable boats
• Sealant added to further enhance the airtight integrity of your inflatable

User questions & answers

Question:	will this stay intact after rolling up the deflated painted boat
Answer:	Yes it stays rubbery but dry to the touch
Question:	What kind of prep work needs to be done before applying the topside paint
Answer:	It’s listed on the can in detail. Basically you need a light sanding - wash with Acetone to prep - then paint.
Question:	Is the Quart enough to paint 14 foot long dingy? do I need thiner to mix with for using spray gun
Answer:	One quart is enough to cover an average 9'-10' dinghy, approximately 50 sq ft. Topside Paint is a latex paint and can be thinned with water.
Question:	How long will it last (estimate) in 4 seasons area such as new hampshire usa
Answer:	Topside Paint will last for years. We have tested the colors for stability up to 5 years. (Red is always going to fade the fastest.)

Product description

Use Inland Marine USA's Numbering/Stencil Kits to apply registration numbers, a name, or a custom message to your inflatable boat or dinghy. Includes letter and number stencils and Inland Marine's specially formulated Topside Paint in an assortment of colors to enhance your boat's style.

• Won't peel off!
• Available in White, Black, Gray, Blue, Red, Orange and Yellow

User questions & answers

Question:	Do you paint the lettering on the inflatable when it’s inflated or deflated
Answer:	apply paint when inflated.
Question:	Do your stencils for inflatables come in various sizes
Answer:	No. Only the USCG required 3" stencils.
Question:	Does the paint adhere to polyethylene hulls
Answer:	The amount of paint I did not think would be enough to cover both sides of my inflatable boat the stencils work excellent and I used a permanent black sharpie to fill in and I have washed the boat several times and have applied several coats of 303 rubber vinyl protectant and the sharpie is not faded yet

Product description

MAIN SPEC



- Max Air Pumping Speed: 70L per Minute

- Pressure Support Rate: 0.5-20 PSI (0.034-1.378)

- Controlled by: Built-in Digital Pressure Sensor

- Pump Working Voltage: 11-13V DC

- Energy Consumption: 120W

- DC Power Cord Length: 9ft

- Air Hose: 4.5ft Length & with 5 Valve Adaptors

- Limited Warranty: 2 Years in USA & Canada



This intelligent 12V DC 120W electric pump comes with digital control and LCD screen to display the set pressure and real-time air pressure, pump can auto stop at your pre-set air pressure, pump can auto stop when max 20 minutes continued working time reached. So you can never over-inflate the chamber or damage the air pump.



Thanks to the intelligent control system and its new design power unit, this air pump is great to use with your inflatable SUP, paddle board or Kayak. It can fully support from 0.5PSI to 20PSI and with long last quality. This pump is suitable for the products that are using the HR (Halkey-Roberts), Bravo or similar type air valve that suitable the most of inflatable SUPs and paddle boards in the market. This kind of air valve has a turning pin or pressing down pin at the middle to control the valve's Open & Closed position. The universal valve adaptors supplied with the pump can fit on it.



This pump also comes with 4 additional universal valve adaptors. So you may be easy to find one that suitable for your other inflatable product, all valve adapters are made to be screw in style and well build to guarantee the air tight. The pump's 12V DC connector (Car Cigarette Lighter connector) has a built-in 10A fuse. You can connect the pump to your vehicle. Unscrew the head connector bolt can access this fuse if need exchange. Seller also provide the 12V DC battery convertor and pump can be more convenience to use it.



100% satisfied guarantee.

• This intelligent DC electric air pump with a Digital pressure LCD screen is the best pump for inflatable tent, SUP, and paddle board etc. Easy to Reach High Pressure, Engineered in Canada. Max pressure can reach 20 PSI (1.378 Bar /138 Kilo-Pascal) in about 15 minutes for an inflatable paddle board. This new single stage high efficient handy air pump is with our latest standard to build.
• Connect the end with Flexible conduit adaptor to the Nylon air hose (High Temperature Qualified) with the pump inflation outlet and twist clockwise to tighten it. Install the supported valve adaptor to the other end of the hose, and twist clockwise to tighten it. Then connect this air hose to the chamber and ready to go.
• After connecting with the power, the pump will be turned on, LCD screen is showing the reading pressure. Press the Pressure Unit button to select the pressure unit PSI or Bar. Use the Pressure Increase button (+) or Pressure Decrease button (-) to set your needed pressure. The range of pressure value is from 0.5 to 20PSI, (1PSI=0.0689BAR). Increasement is 0.5 PSI. After finishing the above steps, press the power On/Off button to start the pump.
• During the inflating process, you can be easy to increase or reduce the set pressure value without stopping the current pumping. Use the Unit button to switch the pressure reading in any time. Press the On/Off button to stop the pump. Pump maximum continued working time is 20 minutes in its program, and the pump can turn off by itself when 20 minutes reached. You can manually turn on the pump once again if you need more works.
• This pump has built in a digital pressure gauge to do the real time monitoring. When the pressure reading can reach the pump set value, the air pump will stop automatically. You can make sure the pressure is good before you disconnect the air hose from the chamber. When the application is 20PSI, the air hose connector will turn very tight when disconnecting. This is normal.

User questions & answers

Question:	is there free returns on this
Answer:	30 days for return.
Question:	Does this come with other adapters that can fill tubes, mats, etc
Answer:	Yes it comes with other adapters
Question:	Can you change the sup valve type? i have 2 boards and only one is a halkey-roberts. i think the other is a schrader valve
Answer:	yes it comes with 2 different valve adaptor with 3 o rings. or if you got the NRS board then order the version hose kit to fit.
Question:	Does it deflate
Answer:	No

• 【Strong Resistance to Compression】This marine fender features a high performance of compression resistance. It is able to withstand much compression without breaking. Also, with ribbed on all sides increase friction and resist abrasion, making it strong enough to withstand external force extrusion.
• 【Reinforced Eyelets on Both Ends】 There are two eyelets on both ends of each fender in order to help the fender attach to your boat more firmly. The eyelets are reinforced to prevent breaking in daily use. Moreover, you can hang the boat fenders vertically or horizontally with the two eyelets according to your needs.
• 【Buffer Protection for Boat】 This boat fender features great buffer effect, protecting boats and docks from damage caused by heavy collision between hard surfaces, especially when the boat speeds into the shore or even when two boats collide accidentally. This tool is of much practicality for ship owners.
• 【High Quality Material for Durability】 Crafted of marine-grade PVC material which enjoys distinct advantages of abrasion and UV resistance, this boat fender could weather regular use for years to come. PVC material not only adds solidity and durability, but also makes this boat fender highly glossy.
• 【Equipped with Fender Lines & Inflator】 For make convenience for you, this 4 pack boat fenders come with four strong fender lines which are helpful and long enough to connect fenders with boat. Meanwhile, equipped with inflation pump and needle, it can be inflated or deflated to a desired pressure at your convenience.

User questions & answers

Question:	What size diameter is the fender line
Answer:	1/2 inch
Question:	Are the lines black or white
Answer:	I purchased the blue fenders and the lines are white.

Product features

Goplus 4-Pack Ribbed Boat Fender to Reduce Corrosion and Damage

Made of premium PVC material, the boat fender set is corrosion-resistant, scratch-proof and UV-resistant. The 1/8 inches thickness surface adds much strength and durability to the overall structure. Vertical ribs on all sides make it not prone to roll but could effectively reduce abrasions to protect boat. Two ropes holes on both ends allow you to hang on this item in vertical direction or horizontal direction. Last but not least, this marine fender features an excellent performance of buffering, which could effectively safeguard the boat docks from damage caused by unexpected collision. In a word, this boat fender set will be an ideal choice for sailors and ship owners!

Product description

Inflatable boat cleaner cleans, softens, and preserves all rubber and vinyl surfaces include rafts and dinghies. The product removes rubber surface oxidation, tar, greasy dirt and other contaminants.

• Specially formulated for use on the rubber and vinyl surfaces of inflatable boats
• Removes surface oxidation, tar, and grease
• Produces a durable long lasting finish
• Helps protect rubber and vinyl from future environmental damage
• A necessity for detailing a boat or RV
• 16 oz. plastic bottle
• Safe to use for all exterior boat surfaces

User questions & answers

Question:	Will this product clean mildew
Answer:	Not sure but had big rust stains and it clean it. Great product.
Question:	is this safe to use on pool floats and rafts
Answer:	NO !!!!
Question:	Is it used straight out of the bottle or diluted in water?? Thanks
Answer:	Don't dilute it...right out of container & apply with terry cloth towels works great..used it on my yacht Fenders & dingy..

Product features

The TR Industries Collection

TR Industries was founded to provide mold release products for manufacturers of fiberglass, reinforced plastic and cultured marble products. From product molding to the finished part, the complete line of TR Industries professional quality surface treatment products were designed to produce the best finish possible at maximum efficiency and minimum cost. In response to the requests of automotive, marine and recreational vehicle manufacturers, TR Industries developed a product line of surface care products for continued maintenance after the sale. TR Industries further expanded its product line to meet the needs of surface care for in-home use and continues to produce product for the 21st century lifestyle.

The TR Industries Collection

The Gel-Gloss brand by TR Industries offers a complete line of the highest quality cleaners and polishes for the majority of surfaces found within the home, RV or auto. Whether you are looking for product to polish the exterior of your RV, condition your leather seats in the car, or clean your hardwood or laminate floors at home, the Gel-Gloss product line has you covered. TR Industries introduces their consumer line of cleaning and polishing products to meet the demands within the automotive and home cleaning market. Brass, chrome, stainless steel, wood, glass, leather, man-made or natural stone surfaces can all be maintained with the Gel-Gloss product line. Turn to the TR Industries surface care product line for your cleaning needs.

The TR Industries Collection

The Seapower brand by TR Industries has been offering the highest quality of cleaners, protectants, and polishes for the boating world. Boat detailing professionals have often turned to our products for maximum long term boat protection because of our high quality and Seapower’s brand reputation as the “marine surface care experts”. Each product is formulated with a unique, long-lasting, and effective formula which produces a like new boat surface time and time again. Whether you want to soften and restore the surface to your inflatable boat or the leather seats in your speed boat, or just spot clean and polish your marine metal surfaces, Seapower has a product to fit your need.

The TR Industries Collection

Granitize Products, introduced in 1930, is a product line consisting of premium polishes, waxes and cleaners. Originally, Granitize products were developed for the automotive industry for treatment and maintenance of automobile finishes. Granitize products has grown and developed those same high quality automotive appearance products, and they are now available to you, the consumer. You can purchase the same professional’s choice products for your vehicle to make it look as good as it did when you drove it off the showroom floor. From the bumpers to the tires, top to bottom, Granitize has the products you need to make your vehicle a neighborhood show stopper. It is the professional’s choice and now it can be yours!

Product description

There's not much better than spending a day out on the lake with a fishing rod in 1 hand and a cold beer in the other. Take one of your buddies out on the water on the Bestway Hydro-Force Marine Pro Inflatable Raft this weekend. This inflatable raft can fit up to 2 people, or 594 pounds, and is ready for any water adventure. With the high-pressure floor and inflatable seat cushions, you'll be extra comfy while waiting for a catch. The mounted fishing rod holders make it easy for you to rest your rod as you take in the sights of the great outdoors. Thanks to the included inflation pump and screw valves, inflating and deflating this raft is a breeze. The included set of aluminum oars allow you to row out on the deep blue. Best of all, they can be taken apart for convenient storage and transport. Live your best life out on the water on this inflatable raft from Bestway!

• Durable 2-person inflatable raft for a variety of water adventures
• Made of extra-strength, 3-ply reinforced vinyl material
• Screw valves allow for quick inflation and deflation
• Heavy-duty handles and 360-degree grab rope with built-in grommets make it easy to transport
• Mounted fishing rod holders are a perfect fit for your fishing rods

User questions & answers

Question:	Are the seats in this boat detachable
Answer:	This thing is made with very durable materials. I don’t see any reason why it couldn’t handle salt water.
Question:	what does it mean by "high-pressure floor
Answer:	Any dog with sharp claws could. What we did was line the bottom of it with cheap artificial turf because we were fishing in it and didn’t want to bring a fish in and have the hook put a hole in the bottom. The good thing is the bottom portion is a different section of air, so even if your dog popped the bottom then you’d still have the main outer portion full of air. But if you put a dog in there, I would make sure you have a life jacket if you will be far from shore. We were in a pretty slow moving river, so I wasn’t too worried about it.
Question:	Is the material for freshwater only? Can it stand through saltwater
Answer:	When you slide open the headphones, the model number should be etched/printed on the inner part right above the earpads. I don't remember whether it's on the right or left side.
Question:	Can a husky dog pop this
Answer:	On the back even before you take the paper off to reveal the sticky part there are holes that need to be aligned with those of the headphones so technically speaking it does matter

Product description

Have your precious boat comprehensively protected from mooring damage with Askill HEAVY-DUTY INFLATABLE BOAT FENDERS!



BASIC INFORMATION:

Material: Marine Grade Vinyl

Size: 6.5x23 Inch

Color:Black



WHY DO YOU NEED INFLATABLE BOAT FENDERS?

To protect your boat – Boat fenders create buffers from dock and pilings when for docked boats and vessels and can also act as buffers against boats moored nearby，protecting your boat form scratches and damages.

To save space when not in use – Inflatable boat fenders can be easily exhausted and folded flat for storage, which takes up no large spaces and adds to bulk to your cabin.

To set up in minutes – When you want to set up the buffers quickly before the hurricane comes, inflatable boat fenders can be taken out and inflated in minutes, saving you time and effort.



WHY CHOOSE Askill?

Highly Durable Material.

Askill inflatable boat fenders are all made of high-quality marine grade vinyl and all details are well processed for even stronger resistance, which makes them more durable when compared to other fenders on the market.



Easy Storage and Portable.

Despite their strength, Askill inflatable boat fenders are wonderfully lightweight, making them easy to deploy. When fully deflated, they can be folded into flat and compact size for convenient and space-saving storage.



Double Eyelets Versatile Hanging.

Askill cylindrical double eye fenders can be hung vertically when mooring against docks or other flat structure and also horizontally with two fender lines to fend against protruding structures such pilings and prevent roll-off.



WHAT’S IN THE PACKAGE?

4 x Inflatable Boat Fenders

4 x Ropes

4 x Inflating Needles

1 x Hand Pump



To know more about the product, the packaging and return policy, please don’t hesitate to contact us.

• CONPREHENSIVE PROTECTION FOR YOUR BOAT – If you don’t like scratches and damages on your boat caused by bumping and scraping, Askill inflatable boat fenders are here to help. It creates a safe distance to safeguard your boats from all daily scratches and impacts, and keeps your boat well protected even during hurricane seasons.
• INFLATABLE FOR EASY USING & STORAGE – With the provided pump you can easily inflate the twin eye boat fenders in minutes and form an armor for your precious boat; and when not in use, you can exhaust the boat fenders and fold them flat and store them anywhere you want without adding too much bulk.
• PREMIUM MATERIAL, LONGER SERVICE LIFE – Made of high-quality vinyl, these inflatable boat bumpers are built to last years of heavy-duty use and can withstand various impacts, strong direct sunlight, scratches and storms. When with our boat fenders, you should never worry that your boat might be damaged, because Askill is the one to take the risk!
• TWIN-EYELETS FOR CONVENIENT HANGING – There are two braced eyelets on both ends of Askill boat fender to help you pass through wires and hang the boat fender in the desired position more easily. With the twin eyelets design, our boat fenders can be hung on your boat either horizontally or vertically to provide appropriate protection in different conditions.
• PRACTICAL ACCESSORIES & FRIENDLY SERVICE – Each marine vinyl boat fender sold by Askill comes with 4 ropes (23 inch in length)-long rope and 1 inflating needle, the package also contains one handy pump for easy inflation. Please check the package content upon receiving the product. If you have any question about the product, please don’t hesitate to turn to us, we are always ready to help you!

User questions & answers

Question:	Do these come in a pack or is the price just for one
Answer:	This is the price for four.
Question:	Does it come with the inflation adapter and rope
Answer:	Yes, it comes with one adapter and 4 ropes.
Question:	I cherish my little boat very much. Will this boat fender leave a black mark on my boat
Answer:	Answer:Hi. It shouldn’t.
Question:	Is this boat fender seasy to use
Answer:	Yes,it’s very easy to use and I got start quickly.

Product description

Brand Profile:

GOWINTECH is a high technology US company founded in 2000. We have almost 20 years domestic and foreign trade experience. In 2020, we decide to further expand our global online business through Amazon.com. All the products listed in our store is designed and improved by ourselves and has been strictly tested and checked before we send it to you.



Product Description:

Gowintech boat fenders set are made of high quality marine grade vinyl for long time use. It is capable of providing maximum protection to your vessel and is highly practical to utilize for different marine conditions. Great for your boat at the dock, assisting to prevent the damage from your boat or watercraft, especially when speeds into the shore or docking. Suitable for most small and medium size boats such as canoe, pontoon, sailboat etc.



Product Information:

-Material: Marine grade vinyl

-Color: Black

-Package Dimensions: 23*10*10 inch

-Package Weight: 10.7lbs



Package Includes:

-4 x Boat Fenders

-4 x Inflating Needles

-4 x Ropes

-1 x Hand Pump



Frequently Asked Questions:

Q: Do these fenders come inflated?

A: No. It comes with deflated. But it include all the accessories for inflation (inflating needles, ropes, pump). Very easy to setup by yourself.



Q: Is this for a package of 4 fenders or just 1 fender?

A: Our boat fender set include 4 boat fenders, 4 ropes, 4 inflating needles and 1 pump.



Q: What is the size and weight of each fender?

A: Each fender measures 6.5*24 inch. The weight is 2.1lbs.



Shipping Method & Return Policy:

We will always use the Amazon Fulfillment Service to offer you with the hassle-free shopping experience. If there are some issues or suggestions with our product or customer service. Please feel free to contact us via Amazon Messages. We are sure to answer your email and solve your problems within 24 hours.

• BOAT SHIELD & PROTECTION - It would certainly execute an outstanding job at safeguarding your vessel during waves and protect it from docks, obstacles, other nearby vessels; It could also be a great choose as an anchor buoy
• DURABLE FOR LONG TIME USE - Made of high-quality, commercial strength marine vinyl and designed to deliver superior strength and long-lasting service; UV protection gives the boat fenders more power to outlast harsh rays
• TWIN EYELETS DESIGN - It is constructed with braced eyelets on both edges, it enables you to weave the rope through both holes or hang the fenders from one hole; It could be instantly hanged with lines either horizontally or vertically
• PRACTICAL DESIGN - Come with deflated for easy storage; Seamless one-piece construction, oval shape and ribbed sides add strength and resist rolling against hull; The ropes attached are plenty in length, it is long enough for a proper larks head knot to hang them with; A must have for boat owner
• COMPELETE ACCESSORIES - Package include 4 boat fenders, 4 inflating needles, 4 ropes (23 inch in length) and 1 hand pump; Takes less than 10 minutes to inflate all 4 fenders; There is nothing else more required for setup