14 best paintball tanks

Product description

A perfect tank for any paintball marker that operates on High Pressure Air. This Empire Paintball 48cu/3000 PSI tank is Made In The USA. Features: * Lightweight Aluminum DOT and TC certified cylinders "Made in the USA" * 3000 PSI fill capacity with an 800 PSI output pressure * User replaceable Bonnet

• Lightweight Aluminum DOT and TC certified cylinders "Made in the USA"
• 3000 PSI fill capacity with an 800 PSI output pressure
• User replaceable Bonnet

User questions & answers

Question:	Does the mad dog remote coil work with this because mine is not doing anything when I hook it up not even wen I press nipple on top
Answer:	What I did was, instead of pushing the straw into the cone attachment, I pushed the straw *out* of the cone attachment, then attached the merged units onto the duster. Hope that helps.
Question:	What connectors does this use? For refill and for output
Answer:	No, it is not ESD safe, but can be used if careful. The material is plastic which is an insulator that holds a charge. We are talking potentially thousands of volts! Keep the nozzles at least a few inches away from the motherboard or any electronics, spray from a distance, this is a powerful blower so it still works great. Never use the brushes on anything internal, only use them on case exterior, keyboard, etc.
Question:	Am I going to die if I put this on a mini gs
Answer:	The amount of pressure is very close to canned air, just a bit less than a full can of air. There is no build up limit, the power reaches 100% upon flipping the "On" switch. There are 2 speeds.
Question:	Does it use compressed air
Answer:	No you don’t need to remove the fans. They need to be blown out also. Just make sure you unplug the power before blowing it out.

Product description

Your gun isn't going to shoot itself! You're going to need some air. Spray 'em with more paint than they can handle with the Maddog 20 oz. CO2 Paintball Tank! Re-fillable 20 ounce capacity tank BUILT FOR PAINTBALL. Featuring a lightweight, high quality, durable, aluminum body for approximately 800-1000 shots per fill! This 20 oz. refillable C02 tank meets or exceeds all ASTM, DOT, TC or CGA Standards or Requirements and is compatible with all standard CO2 powered paintball guns. Perfect paintball tank for all levels of play.

5 Year Re-Test Cycle - The date stamped on these tanks is the date the tank was manufactured, NOT an expiration date. Tanks are good for 5 years until they will need to be re-hydrotested.

Features:

* High Quality Aluminum 20 Oz Co2 Tank with Industry Standard Pin Valve

* Approximately 800-1000 Shots Per Fill - Never have to worry about running out of air mid-game

* Fresh Tank Dates Guaranteed - Five-Year Retest Cycle

* All Components Meet or Exceed All ASTM, DOT, TC or CGA Standards or Requirements

* Shipped EMPTY - Must Be Filled Prior to Use.

* 10.5" Length x 3" Width

* Tank Weight when Empty: 1.75 lbs

* Tank Weight when Full: 3lbs

* Buy Multipacks to Reload on the Go!



All CO2 tanks are shipped empty to comply with Department of Transportation laws

5 YEAR RE-TEST CYCLE - THE DATE STAMPED ON THESE TANKS IS THE DATE THE TANK WAS MANUFACTURED, NOT AN EXPIRATION DATE. TANKS ARE GOOD FOR 5 YEARS AFTER THIS DATE UNTIL THEY WILL NEED TO BE RE-HYDRO TESTED.

• **1 PACK** 20 Oz REFILLABLE CO2 PAINTBALL TANK - Lightweight Aluminum 20 Oz Capacity CO2 Tank
• COMPATIBLE WITH ALL STANDARD CO2 POWERED PAINTBALL GUN MARKERS - Approximately 800-1000 Shots Per Filll So You Won't Run Out of Air Mid-Game! Entry level to tournament pro, Maddog's got you covered!
• GUARANTEED FRESH MANUFACTURED DATES - 5 Year Re-Test Cycle - The date stamped on these tanks is the date the tank was manufactured, NOT an expiration date. Tanks are good for 5 years until they will need to be re-hydrotested - Exceeds All Industry Standard Safety Requirements - DOT and TC Certified - All CO2 tanks are shipped empty to comply with Department of Transportation laws
• SPECIFICATIONS: * Industry Standard Repeater Pin Valve * 10.5" Length x 3" Width * Empty Tank Weight: 1.75 lbs * Filled Tank Weight: 3lbs
• BUY MULTI-PACKS and RELOAD ON THE GO! Tanks Are Shipped Empty, Must Be Filled Prior to Use.

User questions & answers

Question:	Can these use compressed air
Answer:	The are Co2 tanks and cannot be used for compressed air.
Question:	Does it fit a spyder Victor
Answer:	Yes... but hard to refill. Need special nipple
Question:	Is the valve a standard cga 320 thread? and would it be useable with a sodastream with the appropriate adapter
Answer:	Yes and yes
Question:	can I use it for beer, does it work as a regular CO2 cilinder (rechargeble
Answer:	no

Product description

Refillable 48/3000 HK Army aluminum paintball tanks are a great alternative to carbon fiber systems. Industry Standard High Pressure compressed air regulator set to the standard output pressure of 800psi. The HK Army 48ci 3000psi HPA tank gives the look and performance of a high-end tank without the price tag. Regulators are individually hand assembled and tested on state of the art machines for outstanding quality and assurance.

Features:

* Durable Aluminum Tank Bottle

* Black HK Army 48ci / 3000psi HPA Compressed Air Tank

* Output Pressure 800psi

* Fill Level Gauge

* Includes rubber nipple cover for added protection/storage

* Compact pressure gauge

* Tri-Label UN ISO Certification - Universal Acceptance

* Dual Burst Discs for added Safety

* 5 Year Hydro stamp

* Flat bottom for storage upright or on tables

* Tank measures 3.5 inches diameter x 10 3/4 inches tall

• Black HK Army 48ci / 3000psi HPA Compressed Air Tank
• Durable Aluminum Tank Bottle
• 800 psi Output Pressure
• 5 Year Hydro stamp
• Flat bottom for storage upright or on tables

User questions & answers

Question:	Does anyone use this for hpa airsoft setups? hopefully polar star rifle
Answer:	It’s used to add storage to your smaller air compressor. Gives you a longer shot when using impact wrenches and items. You can get closer to work with a feeder line and have a reservoir near your work. I use one for a 1” impact gun on semis
Question:	Does this fit an tippmann a
Answer:	No. This comes with safety release valve and a 90 degree joint as per the picture, and a valve stem for draining water on the bottom. all other holes are user supplied plugs/connectors/etc...
Question:	What is the hydro test date
Answer:	https://www.rolair.com/products/accessories/airkeg2 DIMENSIONS 23" x 16" x 12"
Question:	can i use this to refill my pcp airgun
Answer:	The valve end is one piece crimped on... thanks

Product description

Empire Basic Air Systems offer an affordable option to the player who wants to upgrade to a High Pressure Air system. These high quality air systems feature an aluminum regulator that provides steady performance and reliability. With a five-year retest cycle, these Empire Basic tanks will operate for many years of quality performance. Features: * Proven regulator performance using Pure Energy Technology * 68 Cubic inches at 4500 psi * Standard 800 psi output pressure * DOT approved cylinder * Limited 90 day warranty * Aircraft grade aluminum construction regulator * Fully serviceable regulator design * Five year retest cycle

• Lightweight DOT & TC certified carbon fiber cylinders Made in the USA
• Utilizing Pure Energy technology regulators that lead the industry in flow, stable pressure output and efficiency
• Both high and low pressure rupture disks installed for the highest level of safety
• All components meet or exceed all ASTM, DOT, TC or CGA standards or requirements
• Five year retest cycle

User questions & answers

Question:	What is the material or the tank
Answer:	Yes
Question:	Can these be filled with air from any air compressor, or do they have to be filled at a store
Answer:	The date is when your tank is due to be hydro tested for leaks an any defective parts
Question:	Can this be fitted to fill a pcp rifle
Answer:	No the output isn’t high enough for a PCP gun
Question:	Can this go on any gun
Answer:	2020

Product description

Empire Basic Air Systems offer an affordable option to the player who wants to upgrade to a High Pressure Air system. These high quality air systems feature an aluminum regulator that provides steady performance and reliability. With a five-year retest cycle, these Empire Basic tanks will operate for many years of quality performance.

• Proven regulator performance using Pure Energy Technology
• 48 Cubic Inch at 4500 psi
• Standard 800 psi output pressure
• DOT approved cylinder
• Aircraft grade aluminum construction regulator

User questions & answers

Question:	Do you have to have all new items
Answer:	For paintball?
Question:	What is the date on the tank
Answer:	Purchased mine 06/2018 and the date on mine is 04/2017....
Question:	Is this the little tank not the regular size
Answer:	No, the tank is quite big, definitely regular size, it was a great buy! The tank without the black top is 9 inches long, total length about 11 inches, and about 4 inches wide. Hope that helps!
Question:	Does this come with a fill nipple cover
Answer:	They do not.

Product description

The HK Army AeroLite Compressed Air HPA Paintball Tank System has been developed with performance and affordability in mind. The comprehensive system pairs a lite-weight carbon fiber bottle and a reliable aluminum regulator with an output pressure of 800 psi. The AeroLite system includes a 5-year hydro cycle.

Features:

* 68 Cubic Inch Lightweight Bottle w/ 4500 psi Capacity

* Reliable Aircraft Grade Aluminum Regulator

* Weight 2lbs 2.4oz

* 800 psi Output Pressure

* DOT & TC Approved Cylinder

* 1.8K and 7.5K Burst Disks for Safety

* Five-Year Hydro Cycle

* Limited 90-Day MFG Warranty

• 68 Cubic Inch Lightweight Bottle w/ 4500 psi Capacity
• Reliable Aircraft Grade Aluminum Regulator
• Five-Year Hydro Cycle
• 800 psi Output Pressure
• DOT & TC Approved Cylinder

User questions & answers

Question:	Does this tank come with a fill nipple cover
Answer:	Not completely sure what that is but if it’s meant to cover the area where you fill the tank then no. It does not.
Question:	Whats the rehydro date
Answer:	All of the tanks are good for 5 years from the date they are born and then require a rehydro test which will certify them for another 5 years. You can re certify the tank a total of 2 times to give you a maximum of 15 years of life. Once a tank is 15 years old (15 years from its born on date / initial hydro) it is considered expired. Each tank has a different initial date based on when the bottle was manufactured and this is specific per tank. Most retailers will restock often and the hydro dates are usually under a year old unless otherwise specified.

Product description

The HK Army AeroLite Compressed Air HPA Paintball Tank System has been developed with performance and affordability in mind. The comprehensive system pairs a lite-weight carbon fiber bottle and a reliable aluminum regulator with an output pressure of 800 psi. The AeroLite system includes a 5-year hydro cycle.

Features:

* 68 Cubic Inch Lightweight Bottle w/ 4500 psi Capacity

* Reliable Aircraft Grade Aluminum Regulator

* Weight 2lbs 2.4oz

* 800 psi Output Pressure

* DOT & TC Approved Cylinder

* 1.8K and 7.5K Burst Disks for Safety

* Five-Year Hydro Cycle

* Limited 90-Day MFG Warranty

• 68 Cubic Inch Lightweight Bottle w/ 4500 psi Capacity
• Reliable Aircraft Grade Aluminum Regulator
• Five-Year Hydro Cycle
• 800 psi Output Pressure
• DOT & TC Approved Cylinder

User questions & answers

Question:	Does it fit any gun example empire axe
Answer:	yea it fits just about all paintball markers
Question:	Does this include the low pressure piston as well
Answer:	No, the regulator style on these tanks do not use different pressure pistons. The regulator you are thinking about is the Pro Reg that comes on the extra lite bottles. Those regs use a pistons to change out low and high pressure.
Question:	What is the typical cost difference for filling hpa vs co
Answer:	Black Ops fields charge $5 to fill hpa tanks. That’s about average industry wide for hpa. Co2 tanks usually cost 5-10$ to fill although there are less and less places offering C02 fills as hpa is talking over as a more efficient and commonly available system. We don’t offer c02 fills or tanks at any of our stores
Question:	Can this infate my PCP rifle to 3,300 psi
Answer:	Even though this tank has an internal pressure of 4500 PSI, the regulator that is included with this tank will cut off the output of the tank at 800 PSI. Assuming you have the adapters to connect this tank your your PCP rifle, this tank will fill your rifle to 800 PSI and then stop. If you are trying to get a higher output you would need a different regulator that allowed that output.

Product description

Action Village makes the most reliable and dependable CO2 tanks on the market. Order a trusted brand that has been making paintball tanks for over 30 Years.

• Action Village makes the most reliable and dependable CO2 tanks on the market. Order a trusted brand that has been making paintball tanks for over 30 Years.
• Manufactured at one of the world leading tank vendors.
• Get Roughly 1000+ shots of most paintball guns on the market.
• Compatible with ALL Paintball guns that are allowed to be run on CO2. Includes most paintball guns from Tippmann, Kingman, Spyder and Azodin.

User questions & answers

Question:	What is the diameter
Answer:	The diameter of the bottle is 3 1/8 or 3.125 inches.
Question:	Are these prefilled or do they ship empty
Answer:	Shipped Empty
Question:	Are these refillable
Answer:	Yes
Question:	Do the tanks have expiration date
Answer:	I don’t see an expiration date on them but a date they were made 10/20. They come empty and have to be filled. When we got them filled they said they cannot fill tanks that are older than 5 years old so I would assume they expire in 10/2025.

Product description

Refillable 48/3000 HK Army aluminum paintball tanks are a great alternative to carbon fiber systems. Industry Standard High Pressure compressed air regulator set to the standard output pressure of 800psi. The HK Army 48ci 3000psi HPA tank gives the look and performance of a high-end tank without the price tag. Regulators are individually hand assembled and tested on state of the art machines for outstanding quality and assurance.

Features:

* Durable Aluminum Tank Bottle

* Blue HK Army 48ci / 3000psi HPA Compressed Air Tank

* Output Pressure 800psi

* Fill Level Gauge

* Includes rubber nipple cover for added protection/storage

* Compact pressure gauge

* Tri-Label UN ISO Certification Universal Acceptance

* Dual Burst Discs for added Safety

* 5 Year Hydro stamp

* Flat bottom for storage upright or on tables

* Tank measures 3.5 inches diameter x 10 3/4 inches tall

• Blue HK Army 48ci / 3000psi HPA Compressed Air Tank
• Durable Aluminum Tank Bottle
• 800 psi Output Pressure
• 5 Year Hydro stamp
• Flat bottom for storage upright or on tables

Product description

The HK Army 20oz CO2 Tank will shoot around 1,000 paintballs on a single fill (tank ships empty). The aluminum construction provides for a lightweight tank for your paintball marker.

• Capacity: 20 Ounces (ships empty)
• 5 Year Hydro Cycle (Date stamped on the tank is the BORN Date, good for 5 years after that date)
• Lightweight Aluminum Construction
• Brass Pin Valve for Reliable Performance
• Around 1,000 Shots Per Each Fill (Depends on the Marker you are using)

Product description

- Standard 800 psi output pressure - Five year retest cycle - DOT and TC approved cylinder - Made in the USA - Tank must be filled prior to use

• Aluminum High Pressure Air system
• 48 cubic inch cylinder, 3000 psi
• Proven regulator providing stability and consistency
• Nickel plated bonnet for increased durability
• Aircraft grade aluminum regulator

User questions & answers

Question:	What year is the DOT stamp
Answer:	1/2 inmch
Question:	What year is the DOT stamp
Answer:	Yes. There should have been better photos, including the opposite side. The product description should have included the details you asked for. The current product description is incorrect - there is no gauge or hose included, just what you see in the photo. Look up the JEGS Performance Products W10056 manifold - it's the same part, but with more accurate description and 4 photos. The gauge port is threaded 1/8 NPT, and the output is 1/4 NPT. These are common sizes for a mini gauge and standard air fittings and/or hose ends.
Question:	How long do they last for? Some say only 5 years and nobody will fill it
Answer:	Made in China. And actually only has a two year destroy date stamped on the tank itself.
Question:	I bought a 2 pack of Tippmann 48ci high pressure aluminum cylinder tanks new. But they came empty. Are they supposed to come filled or empty
Answer:	Remember all tanks are shipped empty and would need to be filled before use but all remote lines should work with this style tank.

Product description

ISO Certified Lightweight aluminum cylinder is DOT/TC/Pi compliant. The 3000psi regulator has excellent flow, efficiency, and a stable pressure output. The Chrome regulator top has a long life Nickel Plated Brass Bonnet. User serviceable regulator. 3000 PSI fill-pressure capacity with an 800 PSI output pressure. High and low pressure burst discs for the highest level of safety. Stainless steel fill nipple with built in filter and molded cover. Meets or exceeds ASTM standards with a 5 year hydro date.

• ISO Certified Lightweight 13 cubic inch aluminum cylinder is DOT/TC/Pi compliant
• 3000psi regulator has excellent flow, efficiency, and a stable pressure output
• Regulator has long life Nickel Plated Brass Bonnet
• Stainless steel fill nipple with built in filter and molded cover
• 3000 PSI fill-pressure capacity with an 800 PSI output pressure

User questions & answers

Question:	Is this paintball tank for compressed air or for CO
Answer:	This Tank is for compressed air

Product description

Maddog 5 Year 48ci 3000psi Compressed Air HPA Paintball Tank. BUILT FOR PAINTBALL! Enhanced accuracy, more consistent velocity, and higher performance in all weather conditions over CO2! Compatible with all standard paintball markers that operate on High Pressure Air. High quality aluminum high-pressure compressed air tank designed with safety as a top priority. These tanks are brand new, guaranteed with fresh ~5-year hydrotest dates. Each and every cylinder meets or exceeds industry regulations for quality and they're manufactured in facilities that have won awards for proactive safety practices and regulations. All Compressed Air HPA Paintball Tanks are Shipped EMPTY and must be filled prior to use.

5 Year Re-Test Cycle - The date stamped on these tanks is the date the tank was manufactured, NOT an expiration date. Tanks are good for 5 years after the stamped date until they will need to be re-hydrotested.

48/3000 Compressed Air Tank Features:

* 5 Year Compressed Air HPA Paintball Tank - 48ci 3000psi

* BUILT FOR PAINTBALL! Compatible with all standard paintball markers that operate on High Pressure Air

* High quality aluminum high-pressure compressed air tank designed with safety as a top priority

* Each and every cylinder meets or exceeds industry regulations for quality and they're manufactured in facilities that have won awards for proactive safety practices and regulations

* 11" Length x 3.75" Width

* Tank Weight when Empty: 1.9 lbs.

* Enhanced accuracy, more consistent velocity, and higher performance in all weather conditions over CO2!

All Compressed Air HPA tanks are shipped EMPTY to comply with Department of Transportation laws

5 YEAR RE-TEST CYCLE - THE DATE STAMPED ON THESE TANKS IS THE DATE THE TANK WAS MANUFACTURED, NOT AN EXPIRATION DATE. TANKS ARE GOOD FOR 5 YEARS AFTER THIS DATE UNTIL THEY WILL NEED TO BE RE-HYDRO TESTED.

• BUILT FOR PAINTBALL! Maddog 5 Year 48ci 3000psi Compressed Air HPA Paintball Tank is Perfect for your Paintball Marker! Enhanced accuracy, more consistent velocity, and higher performance in all weather conditions over CO2! All Compressed Air HPA Paintball Tanks are Shipped EMPTY and must be filled prior to use.
• High Quality 48ci 3000psi Aluminum 5 Year HPA Tank | DOT / TC certified
• Industry-Standard 3000psi regulator has excellent flow, efficiency, and a stable pressure output | 11" Length x 3.75" Width | Tank Weight when Empty: 1.9 lbs
• Fresh Manufactured Date Guaranteed - 5 Year Re-Test Cycle - The date stamped on these tanks is the date the tank was manufactured, NOT an expiration date. Tanks are good for 5 years after the stamped date until they will need to be re-hydrotested.
• All Compressed Air HPA tanks are shipped EMPTY to comply with Department of Transportation laws. Tanks Must Be Filled Prior to Use. | Designed w/ Safety as a top Priority!

User questions & answers

Question:	Will this fit the azodin kaos semi-auto paintball marker
Answer:	Yes. You can also use co2 in that gun... so if you you are playing at a paintball field that can refill your 3000 PS tank... it's good for you... if your playing at home or outlaw ball co2 is esyer
Question:	what is hpa for
Answer:	HPA? High Pressure Air? The primary use of this canister is for paintball. It's the force that drives the paintballs out of the marker.
Question:	does this come filled
Answer:	No, it does not. If it's too dangerous to ship pressurized.
Question:	is it refilable
Answer:	Yes it is refilable ,i bought them for my paintball markers ,i fill it with my special air compressor.it shoots great ..

Product description

The new lightweight AL-200 loader with 200 round capacity features continuous agitation technology that delivers up to 10 BPS. The AL-200 low profile design also features, LED on/off low battery indicator, quiet operation, adjustable O-ring neck to fit most markers and a snap fit wide mouth lid.

• Model Number: 20T-R
• 20 oz
• Refillable
• Meets or exceeds ASTM standards
• CO2 not included

User questions & answers

Question:	How much does a 20 oz tank weigh after filled
Answer:	An empty tank weighs about 2.5 pounds. The maximum CO2 fill weight is 20 ounces so total about 60 ounces or 3.75 pounds. Don't buy the Tippman. The one I bought leaked like a sieve (see my review). I replaced it with an Empire 20 oz CO2 Tank which will hold a CO2 charge for months (maybe years!)
Question:	Will this fitt on the project salvo gun
Answer:	Yes this will work with the Project Salvo. Be sure to select Paintball Discounters as your Amazon fulfillment partner!
Question:	Will the 20 oz work with the TMC tank in stock
Answer:	Hello, We recommend the use of a 13ci HPA tank as those are the intended item to use with the TMC air through stock. Regards,
Question:	Will this fit the kingmann spyder gun
Answer:	Yes, be sure to select Paintball Discounters as your Amazon fulfillment partner!