10 best paintball tank regulator
A paintball tank regulator is a vital component of a paintball marker setup, specifically related to the air or gas supply used to propel paintballs. Here's what you need to know about paintball tank regulators:
Function: The primary function of a paintball tank regulator is to control and regulate the airflow of compressed air or CO2 from the tank to the paintball marker (also known as a paintball gun).Regulators ensure a consistent and controlled release of gas, which is essential for accurate and reliable firing of paintballs.
Pressure Regulation: Paintball tank regulators are designed to maintain a consistent output pressure that matches the requirements of the paintball marker. This pressure typically ranges from around 450 to 850 PSI (pounds per square inch), depending on the marker's design and the type of propellant gas used.
Compatibility: It's crucial to select a regulator that is compatible with the type of gas you intend to use. Some markers are designed to work with either CO2 or compressed air, while others are specific to one type. Regulators must match the gas source to ensure proper operation.
Adjustability: Many paintball tank regulators are adjustable, allowing players to fine-tune the pressure output to suit their preferences or specific marker requirements. This adjustability can be crucial for optimizing performance.
Output Ports: Regulators typically have one or more output ports. In most setups, one port is used to connect the regulator to the paintball marker's air inlet, while the other port may be used for accessories like expansion chambers or remote lines.
Maintenance: Regular maintenance is essential for the proper functioning of a paintball tank regulator. This includes cleaning, lubrication, and ensuring that O-rings and seals are in good condition. A well-maintained regulator helps prevent air leaks and fluctuations in pressure.
Gauge and Features: Some regulators come with built-in pressure gauges that allow players to monitor the tank pressure easily. Additionally, certain high-end regulators may have advanced features such as on-the-fly pressure adjustment or dual-stage regulation for even greater precision.
Tank Thread Compatibility: Paintball tank regulators need to match the threading of the paintball tank they are attached to. Common threads include CGA 320 for compressed air tanks and DIN 477 for CO2 tanks.
Safety: Safety is a top priority when dealing with compressed gases. Players should always follow safety guidelines for handling, filling, and transporting paintball tanks, and ensure that their equipment is in good working condition.
In summary, a paintball tank regulator is a critical component that regulates the flow and pressure of gas from the tank to the paintball marker. It plays a significant role in ensuring consistent and accurate firing of paintballs during games, making it an essential part of any paintball player's gear setup.
Below you can find our editor's choice of the best paintball tank regulator on the marketProduct description
IORMAN Universal 4500PSI Paintball Air Tank Regulator, 5/8"-18UNF Inlet Thread Size, G1/2-14 Outlet Thread Size, Comes with Standard 8mm Male Quick Disconnect Foster Fitting Adapter.
- Max up to 4500psi high pressure gauge input, 800psi regulated output.
- Fits most of air tanks with inlet threads 5/8"-18UNF, the outlet threads size is G1/2-14.
- Premium quality regulator comes with a 3k and 7.5k burst disk.
- Comes with standard 8mm quick disconnect male foster fitting adapter for filling.
- The regulator is high air flow rate, light weight, easily operation and re-buildable, applicable medium with Air/CO2.
User questions & answers
Question: | whats the diameter of the main body |
Answer: | When I used I used only co2 it was easier for me to get filled but not sure bout the hpa tank I had purchased but returned was hard for me to find a place to fill in my area,I am pretty sure it will fit (sorry)they normally do |
Question: | Can I pop this on a empire carbine fiber tank |
Answer: | Yup! There's a small screw similar to an Allan key type that you unscrew and the regulator pops right off |
Question: | Can you turn it off |
Answer: | Yes. Worked great on my brothers g5 |
Question: | I just bought this for my iorman 4500 psi tank. i assume the bottom goes into the tank. what do i need to purchase that fits on top of this |
Answer: | Yes, this tank can be used with the D3FY markers |
Product description
Every regulator is hand crafted and factory tested Non wrist digging, low profile design fill valve.Brass or optional Aluminum bonnet - see regulator parts for details, Comes with Plastic Thread Cap, Shim Pressure Adjustment,Completely rebuildable by the user, The regulator is light weight and easily re-buildable with a high air flow rate. Meets all DOT, CGA and ASTM specifications, Sonic Recharge Technology piston - plated aluminum piston that produces an industry leading recharge rate and virtually eliminates reg shoot down.
- đ”Rated pressure for IN:3000psi - Out:800Psi Can fit most of your tanks with Thread:5/8"-18UNF, the outlet threads size is G1/2-14.
- đUsing for high pressure air cylinder, SCBA cylinder, SCUBA diving steel cylinder or PCP tanks,easy to assemble and install for Air / CO2 filling.
- đMade of good quality materials, sturdy and durable, an economical high performance tank regulator. With a high air flow rate to make paintball shoot out with faster speed.
- đComes with standard 8mm quick disconnect male foster fitting adapter for filling.
- đExterior is dark black anodized aluminum with a black Aluminum thread protector and a rubber fill nipple cover. Regulators are supplied with a standard male foster fitting for filling.
User questions & answers
Question: | How do I adjust air flow rate? Which valve |
Answer: | Yes, most Tippmann a5 threaded barrels will work |
Question: | Which valve adjusts output pressure |
Answer: | Donât know but I get about 500-600 Shots in my paintball gun |
Question: | Can this be purchased with 1800 PSI output |
Answer: | Yea it is refillable as far as how much Iâm not sure... |
Question: | Can ninja shims be used to increase pressure |
Answer: | Yes, it will |
Product description
Output Pressures:
Standard: Adjustable (450 to 800 psi)
SHP: Adjustable (1100 to 950 psi)
SLP: 300 psi
- 300 psi Output Pressure
- 30% Increased Flow
- Ball Valve
- Mini Gauge
- Mini Fill Nipple
- Rotational Collar
- Belleville Spring Stack
User questions & answers
Question: | Will this fit a dye throttle tank |
Answer: | About 1 1/16â |
Question: | What is the thread size |
Answer: | Carbon fiber* lol but yea it should just screw in they are all the same thread |
Question: | I have an HK army aerolite 68ci/4500 tank. Will the SLP reg fit |
Answer: | No |
Question: | Can i adjust pressure to 1700 psi or 1800? psi |
Answer: | U need a reg for airaoft or just a line for paintball |
Product description
Product description
Gurlleu universal paintball UFA fill adapter, for using with CO2 fill stations, or remote coilsIdeal for your gear bagLets you release air from any paintball tank,most commonly seen on remotes and fill stations.
Product specification
Working pressure: 3000psi
Output thread: 1/8 NPT
Input thread: G1/2-14.
Material: Hard Alloy
- Max to 3000psi working pressure.
- 1/8 inch NPT female side hole threaded with 8mm quick plug and gauge
- G1/2-14 ( 0.825-14NGO ) female bottom threaded, screws onto any depressed pin valves
- Heavy duty aluminum construction, lightweight and durable design, corrosion resistant.
- Paintball UFA fill adapter On/Off, perfect for remote systems or CO2 fill stations, release air from cylinders.
User questions & answers
Question: | Is it smart to use this to fill co2 tanks with compressed air |
Answer: | No. CO2 cylinders are not rated for the same high pressure that compressed air cylinders are rated for. CO2 cylinders are rated for a maximum pressure of 860 psi and compressed air cylinders can be rated at 3000 psi and higher. Even if you use a CO2 cylinder and fill it to no more than 860 psi you will not get the same kind of volume out of it because at 860 psi the carbon dioxide is a liquid inside the cylinder and air is still a gas. Both will expand but the expansion ratio for CO2 is about 535 to 1 and this is much higher than the air. |
Question: | Can i use this just to check the current pressure on my 12oz co2 tanks? would i need something else? thanks |
Answer: | Are those tankst threaded and refillable ? If not . tben no . |
Question: | Does this have a bleeder to release pressure in the line |
Answer: | It does not have a bleeder valve to release the line pressure, but it will let you empty out whatever it is youâre filling, an air bottle in my case. My compressor and hand pump have bleeder valves and I bleed the line that way. |
Question: | Does the gauge read from the tank side or the npt-threaded side of the adapter? In other words, with the valve closed will it read the input pressure |
Answer: | Have mine set up for PCP rifle to check output of regulator on tank. Mine has a slide to bleed air out of tank if need be and gauge is attached to that. With valve open it should read tank pressure. With valve closed it will read input pressure from npt if it's greater then the pressure that's trapped inside the valve from tank. Will upload pic of my setup with slide to bleed out air in tank and valve b4 removal as to not blow out oring off bottle. Makes taking valve off easy since there is no pressure. |
Product description
Description NINJA regulators can toggle from STANDARD 800-900 PSI output to a medium 650 PSI or low 450-550 PSI output in a few minutes by removing shims. This eliminates the need to purchase 2 regulators or separate spring kits. Features MADE IN THE USA! All black tactical look Ninja Aluminum valve cap included SRT piston ?Sonic Recharge Technology piston-plated aluminum piston that produces an industry leading recharge rate and virtually eliminates reg shoot down SPA ? Shim Pressure Adjustment- change output pressure by adding or removing shims, not springs or pistons MFV ? Mini Fill Valve ? Non wrist digging, low profile design fill valve Meets all DOT, CGA and ASTM specifications Completely rebuildable by the user Every regulator is hand crafted and factory tested Super low response curve 0-50 psi from full to empty Safety ASTM COMPLIANT bonnet thread ASTM COMPLIANT DOT burst disc ASTM COMPLIANT Low pressure burst disk ASTM COMPLIANT Restrictor, bleed hole and safety groove Mini Fill Valve is hardened, plated 5000 psi rated Regulator installed to ASTM specifications
- MADE IN THE USA!!!!
- .26 pounds!!!!
- 1-3/8 inches bottle to ASA
- All black tactical look
- SRT piston - Sonic Recharge Technology piston - plated aluminum piston that produces an industry le
User questions & answers
Question: | is this regulator compatible with crossfire bottles? o any one else |
Answer: | Hi this valve can not adjust air flow or pressure. |
Question: | Can this regulator output as low as 40 psi? I need it for a project |
Answer: | This Valve can not adjusts output pressure, the output pressure has been fixed at 800psi. |
Question: | will i still need a line rated at 4500 psi if i have this |
Answer: | Yes. 4500psi in 1800psi out. |
Question: | Hi, do you know, where is the regulator for 3000 psi, for pcp guns ??? Thank You |
Answer: | Yes |
Product description
The HK Army AeroLite Compressed Air HPA Paintball Tank System has been developed with performance and affordability in mind. The comprehensive system pairs a lite-weight carbon fiber bottle and a reliable aluminum regulator with an output pressure of 800 psi. The AeroLite system includes a 5-year hydro cycle.
Features:
* 68 Cubic Inch Lightweight Bottle w/ 4500 psi Capacity
* Reliable Aircraft Grade Aluminum Regulator
* Weight 2lbs 2.4oz
* 800 psi Output Pressure
* DOT & TC Approved Cylinder
* 1.8K and 7.5K Burst Disks for Safety
* Five-Year Hydro Cycle
* Limited 90-Day MFG Warranty
- 68 Cubic Inch Lightweight Bottle w/ 4500 psi Capacity
- Reliable Aircraft Grade Aluminum Regulator
- Five-Year Hydro Cycle
- 800 psi Output Pressure
- DOT & TC Approved Cylinder
User questions & answers
Question: | Can I fill my pcp air rifle to 3000 psi with this |
Answer: | Just Flag |
Question: | can i use this for etha |
Answer: | It Definitely comes with the American flag. I canât remember about the swat but my son said yes. |
Question: | Can i use this to fill my pcp tanks? Do i just use my fill hose like on my hand pump |
Answer: | Less than eight years oldïŒthanks. |
Question: | Do you have this bottle with a regulated 1200 psi output regulator |
Answer: | no, only vest. |
Product description
Ninja Paintball Compressed Air Tank w/ Adjustable Regulator
User questions & answers
Question: | As of February 2020, what is the hydro date / born date for the 48/3000 aluminum tanks |
Answer: | Will it fit in your rifle barrel? Yes. Although, you may need to modify little plastic tip with tape so that it will fit snugly. Will it WORK with your rifle? No. It is a cheap, poorly designed piece of junk that doesnât work with ANY firearm. |
Question: | will this work on my dye czr |
Answer: | Thank you for your question.The below details for your reference.It'll help you confirm it. It comes with 4 adapters which help you install to different device. For any 0.22 to 0.50 (5.59-17.2cm) handguns, rifles, sights and riflescopes Length: 6.1"/155mm Length of rod that fits in the barrel: 2.36"- 3.54"/60mm - 90mm (tapered) Head diameter: 16mm Tail diameter: 5mm |
Question: | will this fit a tippmann Cronus Marker |
Answer: | Thanks!Laser Boresighter doesn't work on 7.62x54 caliber unless you have one adapter which will help you fix our Bore Sighter Kit. By the way,LASER BORE SIGTER Fits any .22 to .50 caliber rifles, handguns, and scopes.Caution: Avoid direct eye exposure to beam |
Question: | will this fit in to the tmc magfed gun |
Answer: | I'm not sure ... it works fine on my Glock 17 (9 mm) but in my Glock 42 (.380) does not work well because it has the shorter barrel, Greetings |
Product description
Empire Basic Air Systems offer an affordable option to the player who wants to upgrade to a High Pressure Air system. These high quality air systems feature an aluminum regulator that provides steady performance and reliability. With a five-year retest cycle, these Empire Basic tanks will operate for many years of quality performance.
- Proven regulator performance using Pure Energy Technology
- 48 Cubic Inch at 4500 psi
- Standard 800 psi output pressure
- DOT approved cylinder
- Aircraft grade aluminum construction regulator
User questions & answers
Question: | Do you have to have all new items |
Answer: | For paintball? |
Question: | What is the date on the tank |
Answer: | Purchased mine 06/2018 and the date on mine is 04/2017.... |
Question: | Is this the little tank not the regular size |
Answer: | No, the tank is quite big, definitely regular size, it was a great buy! The tank without the black top is 9 inches long, total length about 11 inches, and about 4 inches wide. Hope that helps! |
Question: | Does this come with a fill nipple cover |
Answer: | They do not. |
Product description
All metal CO2 Regulators has a 0-125 PSI pressure range with a maximum inlet pressure of 1200 PSI with a safety burst disc rating of 1800 PSI. Fits standards CO2 paint ball. Comes standard with a pressure gauge, dial regulator knob & integeated steel belt clip. The cylinder and regulator are not for oxygen service or use. WRCO2 regulator comes installed with a safety relief device (burst disc, CG-1). The Rating of the burst disc is 1800 psi at standard conditions. This safety device is in addition to the one that comes on the co2 cylinder, which is also a CG-1 burst disc rated at 3000 psi. The paint ball and other co2 cylinders are US DOT Approved cylinders to 3AL specification and are rated at a service pressure of 1800 psi with a safety factor of 2.25 and are required to be hydrotested at a pressure of 1.5x service pressure every 5 years. Warning: Co2 can cause injury (suffocation & Asphyxiation) or death, ventilate the area before entering. Co2 is stored at very high pressure and a liquid Co2 is at cryogenic temperatures which can cause injury, burn, explosion, or death. Co2 should be handled by a trained professional and extreme caution should be taken when dealing with Co2. For safety always wear protective gear.
User questions & answers
Question: | Is it a true fully adjustable regulator, say in the range of 90-140 psi? My intention is to use it for my air horns in my car |
Answer: | The steadiness of it at lower pressures (30 PSI or less) is somewhat wobbly. But anything above 80 PSI 'n she's steady as a rock. Be advised, it is designed for low-flow. Be advised, continuous COâ flow from a liquid source tank through a pressure regulator will freeze up a regulator. The smaller the regulator, the more susceptible it is to this fundamental fact of physics. Intermittent use is not generally a problem. Steady honking to completely empty a 2-lb tank is likely to be a problem. |
Question: | What rupture disk fits this regulator? Looks to be 3000K |
Answer: | The rupture disk rating must match your tank design. This one DOES have a 3KPSI disk. |
Question: | Can you use this with a co2 tank with a siphon tube for airing up a tire or two |
Answer: | Not sure what a siphon tube is. Yes you can use this to air up tires. That is exactly how I use mine. Hooked up to air hose and air chuck |
Question: | Where can I buy just the safety release assembly (part 52 in schematic |
Answer: | I have them. Unfortunately, I do not sell them on Amazon. |
Product description
Refillable 48/3000 HK Army aluminum paintball tanks are a great alternative to carbon fiber systems. Industry Standard High Pressure compressed air regulator set to the standard output pressure of 800psi. The HK Army 48ci 3000psi HPA tank gives the look and performance of a high-end tank without the price tag. Regulators are individually hand-assembled and tested on state of the art machines for outstanding quality and assurance.
Features:
* Durable Aluminum Tank Bottle
* Olive HK Army 48ci / 3000psi HPA Compressed Air Tank
* Output Pressure 800psi
* Fill Level Gauge
* Includes rubber nipple cover for added protection/storage
* Compact pressure gauge
* Tri-Label UN ISO Certification - Universal Acceptance
* Dual Burst Discs for added Safety
* 5 Year Hydro stamp
* Flat bottom for storage upright or on tables
* Tank measures 3.5 inches diameter x 10 3/4 inches tall
- Olive HK Army 48ci / 3000psi HPA Compressed Air Tank
- Durable Aluminum Tank Bottle
- 800 psi Output Pressure
- 5 Year Hydro stamp
- Flat bottom for storage upright or on tables
Latest Reviews
View all
Digital Asset Management Softwares
- Updated: 02.02.2023
- Read reviews

Ts Mirrors
- Updated: 23.01.2023
- Read reviews

Alfie Microfiber Towels
- Updated: 12.07.2023
- Read reviews

Good Cook Muffin Pans
- Updated: 06.05.2023
- Read reviews

Bare Escentuals Hydrating Moisturizers
- Updated: 24.03.2023
- Read reviews