11 best hpa paintball tanks
HPA (High-Pressure Air) paintball tanks are an essential component in paintball markers, providing the air pressure necessary to propel paintballs accurately and efficiently. These tanks play a crucial role in the performance of paintball guns. Here's what you need to know about HPA paintball tanks:
High-Pressure Air: HPA tanks store compressed air at high pressures, typically ranging from 3,000 to 4,500 PSI (pounds per square inch). This stored air is used to power paintball markers.
Tank Sizes: HPA tanks come in various sizes, such as 48ci, 68ci, 77ci, and 88ci (cubic inches). The larger the tank, the more shots you can fire before needing to refill it.
Materials: HPA tanks are typically constructed from lightweight materials like aluminum or carbon fiber. Carbon fiber tanks are lighter and can hold more pressure, making them a popular choice among paintball enthusiasts.
Regulators: Every HPA tank is equipped with a regulator. The regulator controls the output pressure to ensure it's suitable for the paintball marker. Some tanks have adjustable regulators, allowing players to fine-tune their marker's performance.
Refilling: HPA tanks can be refilled at paintball fields or specialized stores equipped with high-pressure air compressors.It's essential to have your tank refilled regularly to ensure consistent performance during gameplay.
Tank Safety: Safety is paramount when using HPA tanks. Tanks must be handled carefully and protected from damage to prevent ruptures or leaks. Proper maintenance and inspection are crucial to ensure the tank's integrity.
Compatibility: HPA tanks are generally compatible with most modern paintball markers. However, it's essential to check the tank's threading and compatibility with your specific marker model.
Pressure Ratings: Always be aware of the pressure rating of your HPA tank and ensure it matches the recommended pressure range for your paintball marker. Using a tank with an incompatible pressure rating can damage your marker.
Cost: HPA tanks vary in price depending on their size, material, and features. Carbon fiber tanks tend to be more expensive than aluminum ones due to their lightweight and high-pressure capacity.
Tank Care: To prolong the lifespan of your HPA tank, avoid exposing it to extreme temperatures, direct sunlight, or moisture. Store it in a cool, dry place when not in use.
In conclusion, HPA paintball tanks are vital components for paintball players, providing the necessary air pressure to operate paintball markers effectively. Choosing the right tank size, material, and regulator settings is crucial for achieving optimal performance on the paintball field. Proper care and maintenance are essential to ensure safety and longevity for your HPA tank.
Below you can find our editor's choice of the best hpa paintball tanks on the market
Tippmann Empire Basics 48ci 3K Paintball Tank- New 2019 Upgraded Version - Globally Certified
Tippmann
Product description
A perfect tank for any paintball marker that operates on High Pressure Air. This Empire Paintball 48cu/3000 PSI tank is Made In The USA. Features: * Lightweight Aluminum DOT and TC certified cylinders "Made in the USA" * 3000 PSI fill capacity with an 800 PSI output pressure * User replaceable Bonnet
- Lightweight Aluminum DOT and TC certified cylinders "Made in the USA"
- 3000 PSI fill capacity with an 800 PSI output pressure
- User replaceable Bonnet
User questions & answers
| Question: | Does the mad dog remote coil work with this because mine is not doing anything when I hook it up not even wen I press nipple on top |
| Answer: | What I did was, instead of pushing the straw into the cone attachment, I pushed the straw *out* of the cone attachment, then attached the merged units onto the duster. Hope that helps. |
| Question: | What connectors does this use? For refill and for output |
| Answer: | No, it is not ESD safe, but can be used if careful. The material is plastic which is an insulator that holds a charge. We are talking potentially thousands of volts! Keep the nozzles at least a few inches away from the motherboard or any electronics, spray from a distance, this is a powerful blower so it still works great. Never use the brushes on anything internal, only use them on case exterior, keyboard, etc. |
| Question: | Am I going to die if I put this on a mini gs |
| Answer: | The amount of pressure is very close to canned air, just a bit less than a full can of air. There is no build up limit, the power reaches 100% upon flipping the "On" switch. There are 2 speeds. |
| Question: | Does it use compressed air |
| Answer: | No you don’t need to remove the fans. They need to be blown out also. Just make sure you unplug the power before blowing it out. |
HK Army Aluminum HPA Tank - 48/3000
HK Army
Product description
Refillable 48/3000 HK Army aluminum paintball tanks are a great alternative to carbon fiber systems. Industry Standard High Pressure compressed air regulator set to the standard output pressure of 800psi. The HK Army 48ci 3000psi HPA tank gives the look and performance of a high-end tank without the price tag. Regulators are individually hand assembled and tested on state of the art machines for outstanding quality and assurance.
Features:
* Durable Aluminum Tank Bottle
* Black HK Army 48ci / 3000psi HPA Compressed Air Tank
* Output Pressure 800psi
* Fill Level Gauge
* Includes rubber nipple cover for added protection/storage
* Compact pressure gauge
* Tri-Label UN ISO Certification - Universal Acceptance
* Dual Burst Discs for added Safety
* 5 Year Hydro stamp
* Flat bottom for storage upright or on tables
* Tank measures 3.5 inches diameter x 10 3/4 inches tall
- Black HK Army 48ci / 3000psi HPA Compressed Air Tank
- Durable Aluminum Tank Bottle
- 800 psi Output Pressure
- 5 Year Hydro stamp
- Flat bottom for storage upright or on tables
User questions & answers
| Question: | Does anyone use this for hpa airsoft setups? hopefully polar star rifle |
| Answer: | It’s used to add storage to your smaller air compressor. Gives you a longer shot when using impact wrenches and items. You can get closer to work with a feeder line and have a reservoir near your work. I use one for a 1” impact gun on semis |
| Question: | Does this fit an tippmann a |
| Answer: | No. This comes with safety release valve and a 90 degree joint as per the picture, and a valve stem for draining water on the bottom. all other holes are user supplied plugs/connectors/etc... |
| Question: | What is the hydro test date |
| Answer: | https://www.rolair.com/products/accessories/airkeg2 DIMENSIONS 23" x 16" x 12" |
| Question: | can i use this to refill my pcp airgun |
| Answer: | The valve end is one piece crimped on... thanks |
100 Polyurethane CO2 / HPA Tank O-Rings (90 Durometer) [RED]
CaptainOring.com
- 90 durometer polyurethane offers superior abrasion resistance
- For use with all standard co2 and HPA/Air/Nitro tanks used in paintball
- Also available in 1,000 Pack for a better value for fields/stores - https://www.amazon.com/dp/B00GUNWUKO
- Manufactured and Warrantied by Captain O-Ring LLC
User questions & answers
| Question: | What is the outside diameter of these before they're stretched onto something |
| Answer: | Yes |
| Question: | Will these fit sodasteam co2 tanks |
| Answer: | Yes |
| Question: | Will this fit for a 24oz. Empire paintball tank purchased off of Amazon |
| Answer: | I don't know for sure but even in my paint ball gun they don't always make it to the end of the barrel hole they are spraying paint |
| Question: | will these fit a standard size little co |
| Answer: | The ones we received were just like the ones in the picture. They are a one time use, washable form of entertainment. |
Product features
Includes 100 tank o-rings
- Package includes 100 polyurethane (90 durometer, red) tank o-rings.
- The 100 pack is enough to last most players for years.
- Always have spares on hand to fix unexpected tank leaks or to save the day for your friends/teammates.
Compatible with all standard tanks
Compatible with all standard CO2 and HPA paintball air tanks. Captain O-Ring has you covered for either tank type with their 90 durometer polyurethane tank o-rings.
10 seconds to install and fix your leak
- Unscrew tank from marker.
- Remove old o-ring from top of tank valve/regulator threads.
- Slip new o-ring onto the groove at the top of the tank valve/regulator's threads (photo above).
- Screw tank back into marker's ASA and get back to playing.
HK Army Aluminum HPA Tank W/Regulator - 48/3000 - Blue
HK Army Paintball
Product description
Refillable 48/3000 HK Army aluminum paintball tanks are a great alternative to carbon fiber systems. Industry Standard High Pressure compressed air regulator set to the standard output pressure of 800psi. The HK Army 48ci 3000psi HPA tank gives the look and performance of a high-end tank without the price tag. Regulators are individually hand assembled and tested on state of the art machines for outstanding quality and assurance.
Features:
* Durable Aluminum Tank Bottle
* Blue HK Army 48ci / 3000psi HPA Compressed Air Tank
* Output Pressure 800psi
* Fill Level Gauge
* Includes rubber nipple cover for added protection/storage
* Compact pressure gauge
* Tri-Label UN ISO Certification Universal Acceptance
* Dual Burst Discs for added Safety
* 5 Year Hydro stamp
* Flat bottom for storage upright or on tables
* Tank measures 3.5 inches diameter x 10 3/4 inches tall
- Blue HK Army 48ci / 3000psi HPA Compressed Air Tank
- Durable Aluminum Tank Bottle
- 800 psi Output Pressure
- 5 Year Hydro stamp
- Flat bottom for storage upright or on tables
Empire Paintball Basics 68/4500 High Pressure Carbon Fiber Compressed Air Tank
Empire
Product description
Empire Basic Air Systems offer an affordable option to the player who wants to upgrade to a High Pressure Air system. These high quality air systems feature an aluminum regulator that provides steady performance and reliability. With a five-year retest cycle, these Empire Basic tanks will operate for many years of quality performance. Features: * Proven regulator performance using Pure Energy Technology * 68 Cubic inches at 4500 psi * Standard 800 psi output pressure * DOT approved cylinder * Limited 90 day warranty * Aircraft grade aluminum construction regulator * Fully serviceable regulator design * Five year retest cycle
- Lightweight DOT & TC certified carbon fiber cylinders Made in the USA
- Utilizing Pure Energy technology regulators that lead the industry in flow, stable pressure output and efficiency
- Both high and low pressure rupture disks installed for the highest level of safety
- All components meet or exceed all ASTM, DOT, TC or CGA standards or requirements
- Five year retest cycle
User questions & answers
| Question: | What is the material or the tank |
| Answer: | Yes |
| Question: | Can these be filled with air from any air compressor, or do they have to be filled at a store |
| Answer: | The date is when your tank is due to be hydro tested for leaks an any defective parts |
| Question: | Can this be fitted to fill a pcp rifle |
| Answer: | No the output isn’t high enough for a PCP gun |
| Question: | Can this go on any gun |
| Answer: | 2020 |
Ninja Paintball Compressed HPA Air Tank w/ Adjustable Regulator (ALL COLORS / SIZES) (68/4500 Carbon, Std Adj Reg, Translucent Black, 68ci)
Ninja
Product description
Ninja SL Carbon Fiber Air Tank w/ Adjustable Regulator - 68/4500 - Translucent Black
User questions & answers
| Question: | Can this be tuned to output 300psi and or lower |
| Answer: | It works with magnification from your scope might work with red dot magnifier not sure though but works with 17 cal to 50 has an insert for 20to12 gauge also for slug guns |
| Question: | Will this fit any Azdon markers |
| Answer: | Yes, it will work. There are 12 adapters will fit almost all calibers from .17-12ga. Please check the adapters size in the second picture of the listing. Thanks for your asking! Customer service team from StrongTools |
| Question: | Will this fit my tippmann a |
| Answer: | Dear Haim Is the No. 12 on the bottom of the biggest adapter? If so, it should work for 12ga. The adapter is expandable, please tighten or loosen to adjust the adapter size. Please contact us via customer service email: customer-strongtools (at) outlook (dot) com, so we can help better. Sorry for your inconvenience! Customer team from StrongTools |
| Question: | What is the born on date for this tank |
| Answer: | Dear customer, The minimum barrel length should be 2" for this tool to work. Thanks for your asking! Customer team from StrongTools |
HK Army Aluminum HPA Tank W/Regulator - 48/3000 - Olive
HK Army Paintball
Product description
Refillable 48/3000 HK Army aluminum paintball tanks are a great alternative to carbon fiber systems. Industry Standard High Pressure compressed air regulator set to the standard output pressure of 800psi. The HK Army 48ci 3000psi HPA tank gives the look and performance of a high-end tank without the price tag. Regulators are individually hand-assembled and tested on state of the art machines for outstanding quality and assurance.
Features:
* Durable Aluminum Tank Bottle
* Olive HK Army 48ci / 3000psi HPA Compressed Air Tank
* Output Pressure 800psi
* Fill Level Gauge
* Includes rubber nipple cover for added protection/storage
* Compact pressure gauge
* Tri-Label UN ISO Certification - Universal Acceptance
* Dual Burst Discs for added Safety
* 5 Year Hydro stamp
* Flat bottom for storage upright or on tables
* Tank measures 3.5 inches diameter x 10 3/4 inches tall
- Olive HK Army 48ci / 3000psi HPA Compressed Air Tank
- Durable Aluminum Tank Bottle
- 800 psi Output Pressure
- 5 Year Hydro stamp
- Flat bottom for storage upright or on tables
HK Army Aluminum HPA Tank - 13/3000
HK Army
Product description
Refillable HK ARMY 13/3000 Aluminum Compressed Air HPA Tank is the perfect lightweight tank for your paintball marker! This is a non-SLP paintball style tank with 800 PSI output. Regulator is compact measuring 61mm from tank top base to end of threaded top. Tank is very light, compact, and easy to store. The 13ci 3000psi HPA tanks gives the look and performance of a high-end tank without the price tag. Regulators are individually hand assembled and tested on state of the art machines for outstanding quality and assurance.
Features:
* 13/3000psi Lightweight Aluminum Bottle
* 800 PSI output (adjustable with optional HPA regulator)
* Low-profile fill nipples and burst disks
* Includes rubber nipple cover for added protection
* Compact pressure gauge
* Tri-Label UN ISO Certification Universal Acceptance
* Dual Burst Discs for added Safety
* 5 Year Hydro stamp
* Flat bottom for storage upright or on tables
* Tank measures 2 inches diameter x 9 7/8 inches tall (including regulator)
- 13/3000psi Lightweight Aluminum Bottle
- 800 PSI output (adjustable with optional HPA regulator)
- Includes rubber nipple cover for added protection
- 5 Year Hydro stamp
- Flat bottom for storage upright or on tables
User questions & answers
| Question: | Is this a CO2 tank |
| Answer: | Hello. Unfortunately we don't sell the reg-neck-to-bottle o-rings separately at this time. Only in this kit. |
| Question: | Does it need to be hydro tested since its a small tank |
| Answer: | Hello. Yes, any tank that accepts standard burst disks and fill nipples will work with these. |
| Question: | Does this come filled |
| Answer: | Hello. The burst disks in this kit are Captain O-Ring branded burst disks. They will fit the stock regulator that came on your Valken Zero G tank, as it accepts standard 1/8" NPT burst disks. |
| Question: | La botella viene de 22CI |
| Answer: | Yes, this kit is compatible with all tanks that use standard 1/8" NPT ports for fill nipples and burst disks. It is not compatible with tanks regulators that use low profile burst disks such as those made by Guerrilla Air. |
Tippmann 48/3000 Aluminum Compressed Air Tank - 3 Pack
Tippmann
Product description
This compact lightweight HPA tank is Globally Certified, which means it’s approved for use in the USA, Canada and Europe. Many paintball and airsoft players use this with a remote line setup. Expect to get 450 to 850 shots per fill with your paintball marker or 1900 shots with your Tippmann M4 Carbine Airsoft Gun.
User questions & answers
| Question: | whats the manufacture date on these tanks |
| Answer: | This will shoot a standard .68 cal paintball |
| Question: | are these tanks pre filled |
| Answer: | All tanks are shipped empty. It’s illegal to ship a full co2 tank. |
| Question: | the air wat we use to blow tire up with can that refill it |
| Answer: | it fit a 12' metal frame pool, but i wouldn't get it. it was garbage, it will come loose in 1-3 days later and it will tear in 3 weeks. |
| Question: | What is the manufacture date on the tanks currently |
| Answer: | I have run the pump with the cover on but not for very long though. |
Empire Paintball Basic Carbon Fiber Air System
Kee Action Sports
Product description
Empire Basic Air Systems offer an affordable option to the player who wants to upgrade to a High Pressure Air system. These high quality air systems feature an aluminum regulator that provides steady performance and reliability. With a five-year retest cycle, these Empire Basic tanks will operate for many years of quality performance.
- Proven regulator performance using Pure Energy Technology
- 48 Cubic Inch at 4500 psi
- Standard 800 psi output pressure
- DOT approved cylinder
- Aircraft grade aluminum construction regulator
User questions & answers
| Question: | Do you have to have all new items |
| Answer: | For paintball? |
| Question: | What is the date on the tank |
| Answer: | Purchased mine 06/2018 and the date on mine is 04/2017.... |
| Question: | Is this the little tank not the regular size |
| Answer: | No, the tank is quite big, definitely regular size, it was a great buy! The tank without the black top is 9 inches long, total length about 11 inches, and about 4 inches wide. Hope that helps! |
| Question: | Does this come with a fill nipple cover |
| Answer: | They do not. |
Ninja Paintball Compressed HPA Air Tank w/Adjustable Regulator (ALL COLORS/SIZES)
Ninja
Product description
Ninja Paintball Compressed Air Tank w/ Adjustable Regulator
User questions & answers
| Question: | As of February 2020, what is the hydro date / born date for the 48/3000 aluminum tanks |
| Answer: | Will it fit in your rifle barrel? Yes. Although, you may need to modify little plastic tip with tape so that it will fit snugly. Will it WORK with your rifle? No. It is a cheap, poorly designed piece of junk that doesn’t work with ANY firearm. |
| Question: | will this work on my dye czr |
| Answer: | Thank you for your question.The below details for your reference.It'll help you confirm it. It comes with 4 adapters which help you install to different device. For any 0.22 to 0.50 (5.59-17.2cm) handguns, rifles, sights and riflescopes Length: 6.1"/155mm Length of rod that fits in the barrel: 2.36"- 3.54"/60mm - 90mm (tapered) Head diameter: 16mm Tail diameter: 5mm |
| Question: | will this fit a tippmann Cronus Marker |
| Answer: | Thanks!Laser Boresighter doesn't work on 7.62x54 caliber unless you have one adapter which will help you fix our Bore Sighter Kit. By the way,LASER BORE SIGTER Fits any .22 to .50 caliber rifles, handguns, and scopes.Caution: Avoid direct eye exposure to beam |
| Question: | will this fit in to the tmc magfed gun |
| Answer: | I'm not sure ... it works fine on my Glock 17 (9 mm) but in my Glock 42 (.380) does not work well because it has the shorter barrel, Greetings |
Latest Reviews
View all
Madame Alexander Dolls
- Updated: 01.04.2023
- Read reviews
Poacher
- Updated: 17.01.2023
- Read reviews
Baby Walker With Rubber Wheel
- Updated: 13.07.2023
- Read reviews
Rival Ice Cream Makers
- Updated: 16.05.2023
- Read reviews
Glue For Press On Nails
- Updated: 26.05.2023
- Read reviews