9 best paintball marker maintenance equipment

Product description

Planet Eclipse Paintball Marker Grease



20ml tube of factory Planet Eclipse marker lube.

• Planet Eclipse Marker Grease

User questions & answers

Question:	Will this work on a spyder victor
Answer:	not that I know of
Question:	Would I need this for a mini gs
Answer:	not too dark, I play mostly woodsball and I can see well even in the shade....If it is too overcast or dark I use the high vis yellow
Question:	Will this grease work on dye guns like the dsr
Answer:	No, single pane is antiquated and almost obsolete now. You will fog up with out a doubt in almost any conditions with a single pane lens. Don’t cheap out on the thermal/dual pane lens for cost reasons
Question:	Do I just put it on the bolt
Answer:	The chrome based lens usually have a light smoke coating on lens itself, which is not bad; but I would highly recommend CLEAR for indoor.
Question:	Will this work on a rize maxxed and Kp3 pump
Answer:	No, it will only fit KLR
Question:	Can I use this on my tippmann x7 phenom
Answer:	Its ok I recommend a bunkerkings cmd mask
Question:	How many OZs is the contents? (how much do you get in a container)? Thanks
Answer:	yellow
Question:	Is this recommended to apply this product to the threads/o-rings on top of an hpa tank where it screws into the asa
Answer:	bag

Product description

Marker oil for your Eclipse Etek or Ego. Will also work on any Spyder, Tippmann 98, A-5 and X7.

• Eclipse Gun Oil

User questions & answers

Question:	Can i use this on a azodin kp3 pump . can i use this live for the pump
Answer:	Hi! It's 1oz of sav in there!
Question:	Do you just put it on the bolt
Answer:	No. It is too oily, stains, and breaks down orings over time.

• THE ORANGE BUTTON ON THE BARREL IS FOR ILLUSTRATIVE PURPOSES ONLY – NOT INCLUDED
• High-impact composite body
• Vertical Grip
• Tippmann Cronus combines high performance with incredible durability
• .68 Caliber Milsim Styled Scenario Paintball Marker

User questions & answers

Question:	Will this fit with the tippman deluxe remote line
Answer:	Yes. This is a DOW 33 type grease and will work with any paintball marker that uses grease. The Dye markers, specifically the DSR included. So yes, you can use this grease on your Dye DSR.
Question:	If this gun got shot or dropped would it break
Answer:	Yes. Well in a way. You put the grease on the o-rings that are on the bolt.
Question:	how long does the paint ball travel
Answer:	Yes, I've used this lube for all my guns. Geos. Luxes. Vanquishes. Dm. Axes. Minis. Pumpes. Etc...
Question:	Will this gun work as it is or do I need to purchase additional supplies (eg co2 tank) for this to work with paintballs
Answer:	Yes! Can be used in any paintball maintenance requiring grease!

Product description

The new Tippmann Stormer is a completely modular .68 caliber marker for all levels of play. The Stormer Series is available in 3 models allowing full customization. The Stormer Basic features our reliable in-line bolt system with a high-impact composite body. The Stormer Tactical adds Tactical Front Shroud, Front / Rear Flip Up Sights and a 6 Position Collapsible Stock that completes the military look. The Stormer Elite allows you to switch between loader and mag fed configurations offering several different looks to switch between.

• Dual Feed modular design that can be convert to be hopper or magazine fed and different looks
• Internal gas line
• High-impact composite body
• Proven, in-line bolt design
• Bottom mounted asa

User questions & answers

Question:	How would one go about cleaning this gun
Answer:	remove the barrel and clean with a barrel swab. remove any dirt on outer portion with microfiber and use a silicone lubrication for moving metal parts and inside the oil port in the ASA (where the tank screws in) a few drops will do, don't over oil it.
Question:	Is it first strike compatible
Answer:	No
Question:	Will an Apex 2 fit on the stormer elite
Answer:	No , the only way to use the apex 2 is buy an adapter and then put the apex2 because the barrel is to wide
Question:	Can I use pepperballs or jawbreaker balls with this gun
Answer:	This marker is magfed and hopper fed so it should be ok with pepperballs or jawbreaker balls as long as it is .68 cal.

Product description

The best cleaning combo in paintball Includes a super durable bendable thick Sick swab and also a durable and resistant pull thru squeegee, a perfect combination for any paintball player at any level. The battle swab can easily clean your barrel during mid game and simply fold and fit in your pocket. The Pull Thru Squeegee can conveniently attach ends to fit around your neck like a necklace! Note: Due to the nature of this product, swab and squeegee colors may vary but quality and performance of this product are not affected! Pull through Squeegee is 20" Battle Swab Squeegee is 16.5"

• The battle swab can easily clean your barrel during mid game and simply fold and fit in your pocket. The Pull Thru Squeegee can conveniently attach ends to fit around your neck like a necklace!
• Keep your barrels clean and keep shooting straight!
• Pull through Squeegee is 20 inches long.
• Battle Swab Squeegee is 16.5 inches long.
• Swab Squeegee easily bends to put in your pocket.

• Reticle allows for 4 different styles. Dot, Circle/Dot, Crosshair/Dot, Crosshair/Circle/Dot combinations. All in one sight!
• A 33mm lens provides quick target acquisition. Wide field of view to maintain situational awareness.
• Very sturdy and secure rail mounting system. Will not come loose, made to last.
• Parallax corrected & unlimited eye-relief, where the dot goes, so does the bullet!
• Ultralight, waterproof and shockproof - Powered one 3V lithium battery (included).

User questions & answers

Question:	What length pic rail is required? 5 slot or 7 slot
Answer:	Hello, I am a nerf gun modder (somewhat) and yes, you can use this on a nerf gun, however, you need a picatinny rail to use the sight. This is a link to the Worker Picatinny Rail for the Retaliator. https://www.amazon.com/Worker-Picatinny-Weaver-N-Strike-Retaliator/dp/B019B63KJ6/ref=sr_1_6?s=toys-and-games&ie=UTF8&qid=1522598908&sr=1-6&keywords=worker+picatinny+rail+nerf
Question:	How does this sight power on
Answer:	Hey Kevin ... I don't think you want to put this red dot sight on your glock because it would be just too big and too heavy for a pistol. I would not recommend it. Hope this would help you out.
Question:	Is it a nerf gun sight
Answer:	The right side
Question:	Can be installed on the glock pistol
Answer:	According to the Sig Manual it states that it has 8 daytime and 2 NV (night vision) settings. So in theory it should. I, however have not tried it, since I do not own any infrared equip. lights etc.

Product features

Feyachi RS-28 4 in 1 Reflex Sight

A 33mm sighting system allows for fast target acquisition, and the open design allows the shooter to stay aware of the surroundings. Creates wide field of view, designed for target shooting and hunting. The dot system is adjustable for red or green and any one of four different styles of reticle. Like getting 4 different sights in one! Lightweight, yet tough and with the rail attachment system it securely mounts to your rifle or shotgun and will last.

Zeroing:

Select the reticle you desire by turning the reticle selector knob and set your intensity at the best position. With the sight mounted, rest the gun on a solid support and aim at a target 50 to 100 yards away. Test shots should be done in the same conditions to achieve maximum accuracy for adjustment, for which the use of firm rest for firing and same type cartridge is recommendable. Each click adjustment moves the point of impact by 1 MOA (approximately 1"± at 100 yds, 1/2"± at 50 yards)

Features

• Dual Illuminated
• 4 Reticle Patterns
• 5 Brightness Settings
• 33mm Wide Field of View
• Parallax Corrected & Unlimited Eye-relief

Notice

This reflex sight is assembled manually, so 0.1% of them may not 100% perfect when first time use. It would be highly appreciated if you could send us a message if there is any problem with this sight. (Lens cracked, Can't hold zero etc.)

We will provide best solution for you.

4 Reticle Patterns

• Starburst
• Cross
• Bulleye
• Dot

Dual Illuminated

• Red & Green
• 5 Brightness Settings （"R" & "G" are "off " mode）

Specification

• Magnification: 1x
• Objective aperture: 33mm
• Field of View: 15.8@ 100m
• Windage/Elevation Click Value : 1 MOA per Click
• Adj. Range: +/- 30 MOA
• Eye Relief: Unlimited
• Length: 82mm
• Battery: 1xCR2032
• Weight: 4 oz
• Size: 3.2*1.5*2.1

Inside the Box

• 1 x 4 Reticles Reflex Sight
• 1 x Rubber lens Cap Cover
• 1 x Cleaning Cloth
• 1 x CR 2032 Battery
• 2 x Wrenches

NOTICE

Feedback from some customers states that the sights are blurry or it shows double images.Please don't worry,It just need 3-5 minutes to preheat when you first time to use it.(Just turn on and let it stay for 3-5 minutes).Then it will show clearly.

If it still results the same, please do not hesitate to let us know before you low rating, we will try our best to help you out.

Product description

Up your paintball game with the Maddog 4+1 Harness Package from Zephyr Sports. This kit starts with the comfortable, adjustable 4+1 paintball harness that holds four pods and one bottle. It also comes with four 140-round pods (color may vary) plus the standard remote coil that provides easy disconnect and features a flexible style to allow for outstanding range of motion. You can use this harness with either HPA or CO2 and just about any standard paintball marker, as long as it has an ASTM compliant threaded interface.

• High-Performance Paintball Harness Constructed from Cordura, this paintball harness holds four pods and one bottle up to a 68ci N2 tank (not included)
• Compatible Design Works with most paintball markers and can be used with both HPA or CO2; Features an adjustable waist for a custom-like fit
• Heavy-Duty Remote Comes with the Maddog Standard Remote Coil that removes bulk from your gun and allows for quick, easy and uncomplicated disconnect
• Great Features Finished with a 3,000-PSI working pressure and features an ASTM standard male adapter; Fits any marker with an ASTM compliant threaded interface
• Complete Package Includes the 4+1 paintball harness plus four pods and the standard remote coil for an all-in-one package to save you money

User questions & answers

Question:	Does the remote line work with a compressed air tank
Answer:	That is what I use, so yes.
Question:	Doee it works with co
Answer:	Yes. It works with Co2.
Question:	Does it come with pods
Answer:	Y es It Does!!!!
Question:	Does it come with a compressed air tank
Answer:	No tank

Product description

Move the BULK weight of the tank OFF your marker and into a pouch! Designed to work with CO2 Tanks, 3000psi & 4500 psi HPA Systems. Unlike Steel braided hoses, this coiled hose will expand and contract to fit whatever position you are in for UNRESTRICTED MOVEMENT. Features: * Move your tank to a pouch and lighten your marker * Designed to work with co2 tanks, 3000 psi, and 4500 psi HPA systems * High flow coiled hose for unrestricted movement * Internal lock prevents the loss of the adjustment knob * CA Adapter attaches to any paintball marker * Quick Disconnect to easily attach and detach your marker

• Choose Quick Disconnect, Slidecheck, or Pro Push-Button Quick Disconnect
• Move the BULK weight of the tank OFF your marker and into a pouch!
• Designed to work with co2 tanks, 3000 psi, and 4500 psi HPA systems
• CA Adapter attaches to any paintball marker Including Tippmann TMC, 98, A5, X7, Cronus, Alpha Black, Alpha Black elite, TCR, Stryker, Stormer. Spyder Fenix, Victor, Agressor, Xtra, Compact, VS Series, JT, Brass Eagle and More
• Remote Works with all standard paintball tanks including HPA/Compressed Air, 13/3000, 26/3000, 35/3000, 48/3000, 62/3000, 45/4500, 50/4500, 68/4500, 70/4500, 80/4500, 88/4500 & 90/4500. Also Works with standard CO2 tanks 4oz, 9oz, 12oz, 16oz, 20oz and 24oz. And many Airsoft HPA Setups.

User questions & answers

Question:	Will this work with a empire mini gs
Answer:	I keep getting asked about this product! It was a piece of crap and failed the second time I turned the knob the seals failed!!
Question:	Would it fit a Tillman a
Answer:	Yes it fits a Tippman A5
Question:	Coil length
Answer:	Coil lengths are the same, one size. Works with all setup
Question:	Will this work with a sodastream bottle? With or without an adapter
Answer:	Yes

Product description

Tippmann Stormer Paintball Gun

• Tippmann Stormer TACTICAL Paintball Gun - Black - 14912
• TIPPMANN STORMER TACTICAL MILSIM STYLED .68 CALIBER PAINTBALL MARKER - Semi-Automatic - Adjustable from 250-325 FPS - Barrel Thread: A5 - Proven, In-line Bolt Design - Internal Gas Line - High-Impact Composite Body - Multiple Picatinny Rails - High-Performance Barrel - Bottom Mounted ASA - Single Trigger - Offset Feedport - Tactical Accessories - And MORE!

User questions & answers

Question:	Is there a kit available to convert to mag fed
Answer:	They should be available soon.
Question:	How many FPS
Answer:	Like all paintball markers, this is optimized for about 280 fps and is adjustable.
Question:	How long is the barrel
Answer:	8 inches
Question:	How can you turn down the air pressure on this gun if you can
Answer:	On the left side of the marker, between the trigger and the O in stormer, there is a cavity. Hard to spot, as it looks like a screw. It goes into the body of the marker at an upward diagonal angle. Use a small allen wrench to adjust left or right. Turning left increases co2 pressure, right decreases it. You can take it out completely for max velocity. But this doesn't improve accuracy and the screw can be tough to reinstall correctly.