13 best sights ars

• Matte black featuring a 3 MOA Dot reticle with 11 brightness settings; Mounts easily on most picatinny rails and is compatible with pistols, shotguns, rifles and muzzleloaders
• Waterproof construction: O ring sealed optics stay dry inside, even when totally immersed in water. Parallax - 50
• Shockproof construction: Built to withstand bumps, bangs, drops and the rough and tumble environment of the field
• Nitrogen purged fog proofing: Nitrogen inside the scope ensures interior optical surfaces won’t fog due to humidity or rapid temperature change

User questions & answers

Question:	Will this sight co-witness with magpul mbus blip-up backup sights
Answer:	Yes we have used ours many times. You just need this. https://www.amazon.com/gp/aw/d/B00YEEDJF6/ref=mp_s_a_1_1?ie=UTF8&qid=1490656143&sr=8-1&pi=AC_SX236_SY340_QL65&keywords=boom+pole+holder&dpPl=1&dpID=41Rbc4HYQKL&ref=plSrch
Question:	how long is battery life
Answer:	They are just regular turtle based legs. They will have a bit of resistance when collapsed or when moved into their respective spots. I always just grab the inside leg and the outside and pull them in separate directions. They all should also have a notch in which they lock in place once opened all the way.
Question:	does this come with a mount riser
Answer:	No, this particular model does not.
Question:	I'm kind of on a tight budget I was either think of this or the UTG 4'' ITA red dot. What im wondering is if this one is worth getting
Answer:	Yes. We run Alien Bees and/or White Lightning with a 47" octabox. You will need sand bags just to be safe. If your concern is the 47" box with a 4' arm, remember the 47" box is a diameter measurement, you will only need half that to clear the holding arm.

Product features

Waterproof Construction and Nitrogen-Purged Fog-Proofing

Featuring nitrogen-purged fog-proofing, this red dot sight will not fog up due to humidity or rapid temperature changes, so you can always clearly see the red dot and your target. The optics are O-ring sealed and will stay dry even when fully immersed in water.

Adjustable Brightness for Better Target Acquisition

The TRS-25 has adjustable brightness settings from 1 to 11, illuminating the 3 MOA dot reticle inside to better help you with target acquisition. And by choosing lower brightness settings, you can prolong the red dot’s battery life.

Shockproof Construction for Maximum Durability

Built to withstand bumps, bangs, and drops, the TRS-25 comes in strong, precision-engineered housing and is perfectly suited for the rough-and-tumble environment of the field. You'll never have to worry about damaging this red dot sight.

Bushnell: The Industry Leader in High-Performance Sports Optics

Since 1948, our guiding principle has been to provide the highest-quality, most reliable and affordable sports optics on the market. Our award-winning products enhance the enjoyment of every outdoor pursuit and empower everyone to get out and experience their passion. Combining cutting-edge design and performance with a commitment to being accessible to all, Bushnell is the most recognized and reputable sports optics brand in the world.

• Thumb slide flip-up mechanism, easy to install and to deploy.
• High-density polymer construction,Non-reflective matte black finish.Polymer front and rear sight Black color, construction extremely light and durable.
• With Visible Front Red Dot Sight and Rear Green Dot Sight provide the brightest aiming points in low-light conditions.
• Dual aperture sight Switch between CQB and Precision comes with the windage adjustment option.
• Compatible with most Picatinny/Weaver rails.

User questions & answers

Question:	Will they fit a diamond back db15ydp r
Answer:	They fit snug on a standard pic rail. So yes
Question:	The push button has a knob. What does it do
Answer:	Adjusts windage and elevation
Question:	Whats the length
Answer:	about an inch and a half up to two inches folded.
Question:	What is the height of the sights
Answer:	From the bottom of the base when sight is up is 1 1/2 inches .

Product features

Fiber Optics Sights

With Visible Red & Green Dot, provide the brightest aiming in dark conditions

Dual Aperture

Switch between CQB and Precision,provide the windage & elevation adjustment option.

Thumb Slide

Thumb slide flip-up mechanism, easy to install and to deploy.

• Tool Free Windage Adjustment with Dual Aiming Apertures
• Precision Machined from Matte Black Anodized Aircraft Aluminum
• Posi-lock Retention Design Prevents Sight Tower From Collapsing when in Use
• Designed to match UTG Super Slim Flip-up Front Sight, MNT-755

User questions & answers

Question:	How much does it weigh
Answer:	Just got mine in the mail, and this is incorrect. I put it on my calibrated scale, and it weighs 1.54 oz. 0.3 is impossibly too light.
Question:	Can someone explain to me how iam going to be on target with out an elevation adjustment
Answer:	As we say back in the Marines, adapt and overcome! And you can use the front site post to adjust your elevation with half turn or fool turn at a time until you reach your target at 100,200,300 yards and so on. And write it down so that you can have it on hand for future reference. I hope this answers your question. Semper Fi
Question:	Have to try this again, what is the height of the peep hole from the top of the rail
Answer:	The sight measures 1 3/8" from top rail to peep hole. Works fine with standard M4 sight post. all metal construction. nice sight for the money.
Question:	What is the height of the peep hole for the rear sight from the top of the rail
Answer:	Not sure, but I've used it with an F marked fixed front sight if that's why you're asking.

Product features

Backup When You Need It

The UTG low profile flip-up sight coexists along the same plane as a long gun’s primary optic. Although more than capable of performing on its own along with its matching low profile front sight, many will equip the two just in the event their primary optic sees a failure. Take it as a form of insurance and that it would be better to have it and not need it, than need it and not have it. Keep the two flipped down and stowed away under your primary optic. If Murphy’s Law finds its way to you, take comfort knowing the two can be readied and depended on within seconds

Unobtrusively Low Profile and Quick to Deploy

Equipping the sights simply requires them to be pushed upward by the hand. The Posi-lock plunger will then activate, locking the sight tower in the upward position when deployed and preventing any accidental folding of the sights while in use. This is especially important when using the sights in tandem with other gear such as a sling or in atmosphere where equipment can easily be snagged on something. Thanks to their low profile shape and minimized 3mm locking bolt mounting deck, when stowed away, the two sights sit extremely low and are unobtrusive to optics and or accessories.

A Pair To Be Had

One can expect the following when purchasing the front and rear as a pair. MNT-955, The rear sight, is equipped with both a large and small aiming aperture and is windage adjustable via an easy-to-use, tool-free, and tactile thumb wheel. MNT-755, The front sight, is equipped with a standard AR15 front sight post that can be adjusted via a 4 prong sight adjustment tool or the tip of a cartridge and can easily be switched out with one of the many aftermarket standard front sight posts currently out in the market. Both mount securely to a MIL-STD-1913 Picatinny rail. This makes them a great choice not just for MSRs, but other platforms that have a straight sight line configuration and are equipped with a 12 O'clock Picatinny Rail.

• MILITARY GRADE METAL CONSTRUCTION: Constructed of metal for a lifetime of use, Tight tolerances gives a secure fit to any standard Picatinny Rail, Same height over bore as any standard sight allows unchanged sight picture with no additional training
• FUNCTIONAL, PRACTICAL, AND FULLY ADJUSTABLE: Provides a perfect co-witness with any standard height optic, Fully adjustable for windage and elevation allowing for precision placement using sturdy, easy to handle dials, Flips down until needed
• ADAPTABLE, MULTIFUNCTION USE: Designed to easily fit any situation with a small aperture and large aperture, Small aperture performs best with medium to long distance applications, Large aperture increase field of view for close quarters needs
• EASY AND SECURE MOUNT: Mounts securely to any standard Picatinny Rail using a pressure screw. Easy Install with only a flathead screwdriver. Provides confidence that gear stays where it belongs when it is needed the most.
• A BRAND YOU CAN TRUST: Backed by a full NO B.S. Lifetime warranty against any and all defects, full and dedicated U.S. based support team to answer your questions and make sure you are 100% satisfied with your purchase

User questions & answers

Question:	Can I use this sight on a mossberg 590 that has rear and front picatinny
Answer:	You should be able to but I'm not certain. I have an armalite ar10b that it fits. I believe it has the standard size picanny as my eotech red dot fit both that and a rock river ar10 I used to own. I hope that helps.
Question:	Do they come in FDE
Answer:	Unfortunately, no, we only offer them in black.
Question:	When these sights are fold down, what are the total lengths for the front and rear. I have a picatinny rail that's not very long
Answer:	Folded 2" front / 2.25 rear Base 1.0625 front and rear
Question:	My gas block is about an 1/8 " lower than my main rail. Will they still align
Answer:	If your front or back sight is 1/8" different in elevation their is enough adjustment on the front sight to compensate for that

Product description

Specification:

1 x Front Sight

1 x Rear Sight

1 x Allen Wrench

Easily to install on picatinny and Weaver Rails

Compatible with Picatinny rails and Weaver rails,and provides the same height-over-bore as standard A2 Irons

Easy Flip Up Operation

A simple press of the button and your iron sights will pop up quickly for quick transition.

• 【45 Degree Sights with Low-Profile Design】Won't take up too much space or interfere other accessories when it's flipped up.
• 【Common for Right Left Handers】Both left-handers and right-handers could use it freely and easily. Low profile sights.
• 【Premium Material】 Adopting solid and high-quality aluminum alloy in matte finish.
• 【Quick Deployment】 Spring load push button with flip-up design, allowing for quick deployment and adjust the deployment according to your needs.
• 【Compatibility】 Compatible with most mounting system. Standard profile height.

User questions & answers

Question:	Made in China
Answer:	Yes, I’ve had them on both sides. For me, I like them better on the right side. I have the rear sight just forward of the ejection port and I get a really good sight picture.
Question:	Will these work on both sides of a firearm
Answer:	great tool , it helps in my sighting but the rear eye piece is to small, needs to be enlarged
Question:	Will i need a front sight tool for the A2 post
Answer:	I can see where that would happen if you have the sites mounted on the left side of the gun rather than the right side. I believe these sites are considered for right-handed shooter’s. If you’re left-handed you’ll need a different type of site.
Question:	Rear site will not fold down as wheel for sight on left hits rail....any suggestions
Answer:	Our Magwell is designed to fit an AR-15 receiver.

Product description

When situations demand split-second target acquisition and maximum field of view, mount up the StrikeFire II and shoot—both eyes open. Feature-rich, versatile and reliable, the StrikeFire II is a great choice for shooters who want a quality red dot sight. Available in multiple reticle colors.

• The Strikefire II Red/Green Dot is a rugged, reliable red dot sight that is at home in a variety of shooting applications. It allows the shooter to operate between two dot colors and ten brightness settings to easily adjust for changing conditions
• Fully multi-coated lenses provide a clean and bright, unobscured point of view. Unlimited eye relief allows for rapid target acquisition. Max Elevation Adjustment- 100 MOA. Max Windage Adjustment- 100 MOA
• The single-piece chasis is compact and lightweight but still delivers shockproof performance withstanding both recoil and impact. Nitrogen purging and o-ring seals ensure fogproof and waterproof performance
• An offset cantilever mount is provided; allowing you to move the sight forward to be used in conjunction with a magnifier and backup iron sights all on the same rail
• With aesthetics and functionality in mind, the power controls are at the rear of the Strikefire for easy access. The Strikefire II runs off a CR2 battery.

User questions & answers

Question:	Will this fit on my AK with the mount that it comes with
Answer:	It is supposed to be BTR-2, but I received a simple 3 dot drop down instead.
Question:	What's the difference between this the 501 and the 505. Does this come with the Cantilever Mount
Answer:	Yes its included
Question:	What is the moa on this
Answer:	Yes, good for close and medium range
Question:	does this have the tall mount compatible to the AR or the short mount for rifles
Answer:	No

Product features

StrikeFire II Red/Green Dot Sight (SF-RG-501)

When situations demand split-second target acquisition and maximum field of view, mount up the StrikeFire II and shoot—both eyes open. Feature-rich, versatile and reliable, the StrikeFire II is a great choice for shooters who want a quality red dot sight. Features sleek rear-facing controls for power on/off and easy adjustment of ten dot intensity levels—lowest two settings are night-vision compatible. Automatically returns to the last dot intensity used when powered up. The 30mm aluminum alloy chassis provides extra-high recoil rating and is waterproof and fogproof. Strike fast!

The lower 1/3 co-witness cantilever mount model is ideal for rifle platforms, positioning the optic bore center 40 mm above the base surface.

Red/Green Dot Reticle

The 4 MOA Red/Green Dot is ideal for situations that demand split-second target acquisition. Choose among ten variable illumination settings—the lowest two settings are night-vision compatible.

The key thing to remember when shooting with the StrikeFire II red dot is to keep both your eyes open! Shooting with both eyes open allows you to take full advantage of your peripheral vision to get on target very quickly. Eye placement is not critical. As long as you can see the dot, you’ll hit your target!

Windage and Elevation Adjustments

The StrikeFire II red dot incorporates elevation and windage dials with audible clicks. Each small click will move the point-of-impact 1/2 Minute of Angle (MOA). 1/2 MOA will correspond to 1/2 inch at 100 yards, 1/4 inch at 50 yards, 1/8 inch at 25 yards, etc.

Adjust the elevation and windage settings:

1. Remove the dial covers.

2. Use the raised bar on the dial cover, a coin or screw driver to make the adjustments.

3. Turn the adjustment dial in the appropriate direction as indicated by the arrow on the dial. Move the dial in the direction you wish the bullet’s point-of-impact to change.

Mounting the StrikeFire II

To get the best results from your StrikeFire II red dot, proper mounting is essential and, although not difficult, the correct steps must be followed. Your firearm will need to be equipped with a Picatinny or Weaver style rail/base.

To attach the included cantilever ring mount:

1. Attach the lower part of the cantilever ring mount to the rail/base and make sure this is solidly seated in the base groove. To prevent recoil injury, position the ring so that you have at least four inches of eye relief.

2. Be sure the base clamp is hooked around the outside of the rail/base. Press downward and forward toward the muzzle. Then, firmly tighten the base clamp hex nut.

3. Place the StrikeFire II on the lower part of the cantilever ring mount with the adjustment control buttons facing the shooter. Tighten ring cap screws evenly until all are snug—use caution so as not to over-tighten. Once the screws are tightened, the StrikeFire II should not move on the rail/base.

Product description

Level 3 Mil Spec Hard Anodization Front Sight A2 post elevation adjustment Rear Sight Dual Aperture Windage Adjustment Designed for Close Quarter Battle Flip-Up Design：Simply press a button and pop up your sights quickly. For quick transition between iron sights and scopes. Fully adjustable for Windage. Both Precision and CQB apertures on rear sight with standard front sight, help to zero better in medium and short distance. Ultralight!!!! MADE of Polyphenylene sulfide is a semicrystalline material. Offers excellent balance of properties, durable and light After many tests and strength tests, it can be used for various gun products of high quality with convenient use and affordable price Good 45 DEGREE OFFSET PUSH BUTTON FLIPS UP WITH EASE - Sights are offset 45 degree to allow you to slightly rotate your rifle to witness target through them and engage. A simple press of the button and your iron sights will pop up quickly. This Sights with Low-Profile Design：Won't Take Up Too Much Space or Interfere Other Accessories When It's Flipped Up. These Angled Sights Work Perfect as a Backup Sight and Give You a Double Assurance For quick transition between iron sights and scopes. Fully adjustable for Windage. Both Precision and CQB apertures on rear sight with standard front sight, help to zero better in medium and short distance.

• Ultralight!!!! MADE of Polyphenylene sulfide is a semicrystalline material. Offers excellent balance of properties, durable and light
• After many tests and strength tests, it can be used for various gun products of high quality with convenient use and affordable price
• Good 45 DEGREE OFFSET PUSH BUTTON FLIPS UP WITH EASE - Sights are offset 45 degree to allow you to slightly rotate your rifle to witness target through them and engage. A simple press of the button and your iron sights will pop up quickly.
• This Sights with Low-Profile Design：Won't Take Up Too Much Space or Interfere Other Accessories When It's Flipped Up. These Angled Sights Work Perfect as a Backup Sight and Give You a Double Assurance
• For quick transition between iron sights and scopes. Fully adjustable for Windage. Both Precision and CQB apertures on rear sight with standard front sight, help to zero better in medium and short distance.

User questions & answers

Question:	Can it be used on a air gun
Answer:	Sure. If your air gun has a rail that extends along the barrel of the rifle, these should do quite well for you!
Question:	Would they fit a GSG
Answer:	Will fit any gun with the rail type in description....works okay. Mine would not screw in anymore to adjust the bullet perfectly. Cause I’m useing mine for close range, and I have a scope mounted for mid/long range it shoot about a inch high at 10 yards
Question:	Doesn't this come with key for front sight
Answer:	The front sight on the original AR could be adjusted with the point of a 5.56 bullet., or .223. This is what they taught in SEA.
Question:	In what country are these manufactured
Answer:	At this price point I am pretty sure it is made in China.

• Screen Size: 22mmx33mm;Weight: 130g; Length: 82mm
• Reflex Sight Reticle Type: Circle Dot, Cross, 10 MOA & 3 MOA(Red and green illuminated)
• 4 reticle patterns offer unlimited eye-relief and corrected parallax
• Allen Wrench included helps you adjust elevation and windage easily.
• Made of high grade Aluminum Alloy, the dot sight is durable and Light weight.

User questions & answers

Question:	How are you guys determining where on the rail your placing this
Answer:	It's in the instructions, you should have a good 3-5 inches of eye relief. So find your natural hold and cheek weld then place the red dot 3-5 inches away from your eye on the rail
Question:	Does it fit the umarex tac Co
Answer:	If the umarex has a picitiny rail, or probably even a weaver.
Question:	Will this work on a gsg 522 airsoft gun
Answer:	I would assume so, I have it mounted on my AR 15 and it has held up just fine and the recoil from an AR is a lot greater than and airsoft gun
Question:	are the batteries easily accessible in local stores
Answer:	Do yourself a favor and check out the 'Celewell' brand batteries on Amazon.

Product features

Features

• Constructed by aluminum alloy with anodized matte black processing.
• 1x Magnification,22x33mm reflex lens provide ultra-wide view.
• Anti-glare reflective coated lens provide excellent optical clarity.
• Ultra-low parallax & unlimited eye-relief.
• A 3-position rheostat illumination (Red & Green)
• Fully adjustable windage and elevation
• With integrated mount for most 20mm Weaver/Picatinny/RIS rail

Specification

• Obj.aperture: 22x33mm
• Field of View: 15.8m@100m
• Magnification: 1x
• Eye Relief: Unlimited
• Reticle Type: Circle dot, Cross, 10 MOA, and 3 MOA
• Windage/Elevation: +/- 30 MOA; 1MOA per click
• Dimensions: 3.2" length
• Battery: CR2032

• 【More Accurate】 From 3-4MOA to 2MOA. This Updated MidTen 2MOA red dot sight allows for more accurate, both-eyes-open shooting. Unlimited eye relief makes for quick target acquisition. Multi-coated scratch resistant lens provides enhanced image clarity and increases light transmission during low light situations.
• 【Enhanced Red Dot】make the dot centered in the inner tube and not blurry, reduce red glare and extra red lights in the view.
• 【Multi-Intensity Levels of Brightness】 11 red dot brightness settings provide optimal visibility in any light conditions, let shooters cater the dot intensity to the situation at hand. Settings 1-5 are suitable for dim or rainy environment while settings 6-9 are better for a bright or sunny day. Settings 10-11 are good for middle days.
• 【Dependable】 A shockproof aluminum body displays extreme durability. Nitrogen purged and O-rong sealed. Fully waterproof with sealed housing.Matte black anodized finish resists scratches while keeping a stealthy profile. Nitrogen purged fog proofing: Nitrogen inside the scope ensures interior optical surfaces won’t fog due to humidity or rapid temperature change
• 【2 Height Mount Options】 Offers two height options (Low and Lower 1/3 Co-Witness), lending its functionality on any platform.

User questions & answers

Question:	is this red dot good on a 12 ga. shotgun
Answer:	Yes, this red dot can be used on shotgun.
Question:	Will this gun sight work on a Weaver rail
Answer:	Fits standard picatinny 20mm rail systems. Enough wiggle room to accommodate almost any similar rail system.
Question:	What riser height for co witness
Answer:	Bushnell TRS-25, which this appears to be a clone of except TRS-25 is 3MOA vs 4MOA RedDot with 1.0" riser gives 1/3 Co-Witness... So for true Co-Witness I'd think 0.83 riser is needed.
Question:	Will this line up with the iron sights on a ar
Answer:	Go with the UTG .83 riser and it will be perfect. Right now they are running between 6 and 8 bucks here on Amazon.

Product features

Upgrated: From 3-4MOA to 2MOA

• There's nothing like a red dot for fast target acquisition and accuracy in dim conditions.The 1x25 red dot is engineered with Amber-Bright optics to help you quickly distinguish a brown tree and a brown critter.

• This sight can be easily used with both eyes open, increasing the shooter's awareness of the surroundings and providing faster target acquisition. Due to the parallax free design, the dot follows the movement of the user’s eye while remaining fixed on the target without centering.

Multi-coated optics

Thanks to the scope's multi-coated optics, hunters will have no problem seeing their target in low-light conditions.

Windage Adjustment

Here please use your tool(not included) to adjust the red dot "Left" or "Right" .

Elevation Adjustment

Here please use your tool(not included) to adjust the red dot "Up" or "Down" .

Riser Mount

1 inch riser mount with 3 slots; precision machined from aircraft aluminum with matte black anodizing.

• The Holosun HS510C New advanced technology LED allows up to 50,000 hours of operation on one CR2032 battery
• 2 MOA dot and a 65 MOA ring, Dot only, Ring only, or Dot and Ring reticle combinations
• Unlimited field of view, Titanium-alloyed, shock resistant hood
• Powered by both battery and solar
• QD mount integrated for easy mounting and removal

User questions & answers

Question:	Is this the latest model
Answer:	It us a cr2032 battery it is not rechargeable.Sunlight is just a second power source to save your battery consumption.
Question:	Will this fit on a Glock
Answer:	Unfortunately its China, I didn’t know until I got the unit in my hands! I will say that it it a reliable and well made product.. But wish it was made in the USA
Question:	So if the battery needs to charge for this you just leave optic in the sun for a recharge
Answer:	I am not sure. It does have the copyright symbol and Disney next to it., but we purchased the dress with the large red polka dots on it and the deep red mesh skirt . The coloring on the large red polka dots on the top part of the dress also faded after just a few washings.
Question:	What is the country of origin
Answer:	It's red - and it's my granddaughter's favorite dress ever!

• Tubeless design with 42mm reflex lens aperture provides quick target acquisition, also a wider field of view to maintain situational awarenes.
• 4 Selectable reticles and 5 brightness settings. Low power consumption for long battery life.
• Integrated mount for standard 20mm Picatinny or Weaver rails which will not loose, made to last.
• Parallax corrected & unlimited eye-relief. Fully adjustable height, brightness, windage and elevation. Where the dot goes, so does the bullet!
• Made of high grade aluminum alloy which makes the red dot sight durable and light weight.

User questions & answers

Question:	Anyone use this on a Remington
Answer:	Not sure if it is stout enough for a shotgun
Question:	Do you have any type of warranty on the product
Answer:	1-year money back. 5 years warranty.
Question:	Will this mount on marlin 1894 44 mag
Answer:	Sure it works if you install a picatinny rail system on your rifle.
Question:	Has anyone used this on a shotgun
Answer:	I installed it on a Panzer Arms BP-12 . Co witnessed with the front sight and fired 30 high powered shells with no issue.

Product features

Features

• Tubeless design with 40mm reflex lens aperture provides a wide field of view, suitable for normal and rapid-firing shooting of moving targets.
• Durable all metal construction
• Low power consumption for long battery life
• Windage and elevation adjustable (tools included)
• Adjustable reticle brightness, height
• Lightweight and shockproof
• Integrated mount for standard 20mm Picatinny or Weaver rails

4 Pattern Reticles Switch

• Provides 4 different pattern reticles to meet various needs.

Wide View

• 40mm reflex lens provides quick target acquisition，also a wider field of view to maintain situational awareness.

Updated Press Button

• Each press to turn on or change the brightness and hold the press to turn off

Please Read

Based on customer'feedback and other sources, an astigmatism (uncorrected or with prescription) may cause blurry reticles on red dots (Double images) and other prismatic optics. If there is an issue with the reticle and you think this may apply to you, please consult a professional for more information on astigmatism and prismatic optics.

This reflex sight is assembled manually, so 0.1% of them may not 100% perfect when first time use. It would be highly appreciated if you could send us a message if there is any problem with this sight. (Lens cracked, Can't hold zero etc.)

We will provide best solution for you.

Inside the Box

1 x RS-30 Reflex Sight

3 x LR44 (AG13) Batteries

2 x Allen Wrench

1 x Len Cleaning Cloth

• Shockproof and water resistant, the gun sight can hold the recoil and keep zero well
• Loop-top prevents the lid of the dot sight windage/elevation adjustment would not be lost
• Come with cantilever mount which fits for 20 mm rail, the sight is easy to install
• 5 illumination intensity, you could select different type to meet your need
• The dot sight is equipped with removable, spring loaded flip lens cover

User questions & answers

Question:	Will this work on a Stevens Model 320 20 gauge pump shot g un
Answer:	Hello, According to my husband. It will not fit.
Question:	I have a front fixed iron site will I be able co witness this red dot site
Answer:	Absolutely. If you have an AR with either backup iron sights, or a fixed front site post, this sight will co witness just fine. In fact it works fine with with the vortex 3x magnifier too. The previous answerer did not know of what you were asking, or was unfamiliar with AR’s
Question:	Can you see at night with this scope
Answer:	it is not a night vision scope
Question:	Would this be a good choice for a .22 rifle
Answer:	You can use on a 22 yes and you can sight it in more then 50 yards if need be

Product features

Specification

-- Weight: 308g/10.9oz

-- Tube Dia: 40mm/1.58inch

-- Length: 120mm/4.72inch

-- Objective Dia: 35mm/1.38inch

-- Magnification: 1x

-- Field of View @ 100 yards: 60°

-- Eye Relief: Flexible

-- Adj.Range: +/- 30 MOA

-- Windage/Elevation Click Value: 1MOA per click

-- Runtime: 110-220 hours

Windage & Elevation

• Windage and elevation are easily and fully adjustable so you’ll never have a problem obtaining an accurate zero.

Extra Long Battery Life

• Battery Life up to 110-220 hour.
• Battery: CR2032 (Include)

Cantilever Mount

• Come with cantilever mount which fits for 20 mm rail. It will fit all Picatinny Rail and Weaver Rail sections.

Product description

Technical Data:

• Extremely light and durable aluminum 

• Visible Front Red Dot Sight and Rear Green Dot Sight 

• Flip-up design with spring load push button, allowing for quick deployment 

• Low profile sights with 45 degree orientation, no interference with optics / laser sight 

• Rear sight Windage adjustable,Front sight elevation adjustable

What you will get?

Package content:   

1 X Front iron sight 

1 X Rear iron sight 

1 X Hexagon wrench

 

100% Life time Guaranteed: If there have any problems , please contact us and you will get the full refund or a new product.

• Machined from extremely light and durable aluminum,Non-rust black anodized finish.
• With Visible Front Red Dot Sight and Rear Green Dot Sight provide the brightest aiming points in low-light conditions.
• Both left-handers and right-handers could use it freely and easily. 45 Degree Sights with Low-Profile Design makes transitioning from optical to iron sights simply.
• Spring load push button with flip-up design, allowing for quick deployment and adjust the deployment according to your needs.
• Compatible with most Picatinny/Weaver rails.