10 best red dot sight for ar15 acog

Product description

UUQ 2.5-10X40 Rifle Scope with Integrated Green Laser and Red Dot Reflex Sight



This compact combo tactical rifle scope is well suited for close to mid-range shooting, with high optical clarity at 2.5-10X times magnification and a 40mm objective diameter. The reticle is illuminated in red or green and in multiple brightness intensities, for a suitable sight picture regardless of lighting or dark environment. The integrated powerful red(green) light sight and the detachable micro reflex dot sight allow for quick acquisition of close quarter and fast-moving targets.



Specifications:



2.5-10x40 rifle scope:



Dimensions:8.5"(length)x3"(width)x3"(height)

Weight:20.5 oz

Magnification:2.5x-10x

Obj. Diameter: 40mm

Brightness Control: Red-5 levels / Green-5 levels

Reticle: Mil-dot

Exit Pupil: 16mm @ 2.5x ; 4mm @10x

Field of View:100 yards of 32.5' @ 2.5x - 8.9' @10x

Eye Relief :101.6mm @ 2.5x ; 76.2mm @ 10x

Power:1 x CR2032 (included)



Green Laser Sight:



Laser Class: 3R(IIIa)

Maximum Output Power: ≤ 5 mw

Wave Frequency: 532nm

Reaching Distance: 500 yard

Power: 1 x CR14250 (included)



Tactical Red Dot Sight:



1X magnification

24-by-34-millimeter objective diameter

Four unique reticles

Three MOA dot size

One MOA click value

Ruby lens coating

4.2-ounce weight

Integrated weaver-style mount



UUQ is registered brand in US, we provide 7X24 online customer service. Please feel free to contact us for any inquiries or product issues.

• High optical clarity at 2.5-10X magnification and a 40mm objective diameter. The reticle is illuminated in red or green and in multiple brightness intensities, for a suitable sight picture regardless of lighting or environment.
• Integrated GREEN LASER featuring an on/off activation push button and the detachable micro reflex dot sight allow for quick acquisition of close quarter and fast-moving targets.
• Fog proof with shock resistant housing, nitrogen purged with O-ring sealed. The lens in the scope is Green, multi-coated & scratch resistant to provide high quality light transfer for best clarity.
• Durable all metal construction, high-grade optical lens and integrated mount for quick and secure attachment to any Picatinny or Weaver rails.
• This scope is great for use in close quarter combat and for fast target acquisition with a BDC calibrated for a.223 with a 55 grain bullet.

User questions & answers

Question:	green laser comes with reflex
Answer:	It is a separate unit
Question:	green laser comes with reflex
Answer:	Yes and it's a very good green laser.
Question:	Who do I contact for warranty parts? My laser button stoped working
Answer:	Contact seller for a new replacement. Thanks
Question:	I am looking for the specs for the uug 2.5 10x40w/reflex - i,e, length, height, weight? cannot find this info
Answer:	Dimensions:8.5"(length)x3"(width)x3"(height)Weight:20.5 ozThx!

Product description

When situations demand split-second target acquisition and maximum field of view, mount up the StrikeFire II and shoot—both eyes open. Feature-rich, versatile and reliable, the StrikeFire II is a great choice for shooters who want a quality red dot sight. Available in multiple reticle colors.

• The Strikefire II Red/Green Dot is a rugged, reliable red dot sight that is at home in a variety of shooting applications. It allows the shooter to operate between two dot colors and ten brightness settings to easily adjust for changing conditions
• Fully multi-coated lenses provide a clean and bright, unobscured point of view. Unlimited eye relief allows for rapid target acquisition. Max Elevation Adjustment- 100 MOA. Max Windage Adjustment- 100 MOA
• The single-piece chasis is compact and lightweight but still delivers shockproof performance withstanding both recoil and impact. Nitrogen purging and o-ring seals ensure fogproof and waterproof performance
• An offset cantilever mount is provided; allowing you to move the sight forward to be used in conjunction with a magnifier and backup iron sights all on the same rail
• With aesthetics and functionality in mind, the power controls are at the rear of the Strikefire for easy access. The Strikefire II runs off a CR2 battery.

User questions & answers

Question:	Will this fit on my AK with the mount that it comes with
Answer:	It is supposed to be BTR-2, but I received a simple 3 dot drop down instead.
Question:	What's the difference between this the 501 and the 505. Does this come with the Cantilever Mount
Answer:	Yes its included
Question:	What is the moa on this
Answer:	Yes, good for close and medium range
Question:	does this have the tall mount compatible to the AR or the short mount for rifles
Answer:	No

Product features

StrikeFire II Red/Green Dot Sight (SF-RG-501)

When situations demand split-second target acquisition and maximum field of view, mount up the StrikeFire II and shoot—both eyes open. Feature-rich, versatile and reliable, the StrikeFire II is a great choice for shooters who want a quality red dot sight. Features sleek rear-facing controls for power on/off and easy adjustment of ten dot intensity levels—lowest two settings are night-vision compatible. Automatically returns to the last dot intensity used when powered up. The 30mm aluminum alloy chassis provides extra-high recoil rating and is waterproof and fogproof. Strike fast!

The lower 1/3 co-witness cantilever mount model is ideal for rifle platforms, positioning the optic bore center 40 mm above the base surface.

Red/Green Dot Reticle

The 4 MOA Red/Green Dot is ideal for situations that demand split-second target acquisition. Choose among ten variable illumination settings—the lowest two settings are night-vision compatible.

The key thing to remember when shooting with the StrikeFire II red dot is to keep both your eyes open! Shooting with both eyes open allows you to take full advantage of your peripheral vision to get on target very quickly. Eye placement is not critical. As long as you can see the dot, you’ll hit your target!

Windage and Elevation Adjustments

The StrikeFire II red dot incorporates elevation and windage dials with audible clicks. Each small click will move the point-of-impact 1/2 Minute of Angle (MOA). 1/2 MOA will correspond to 1/2 inch at 100 yards, 1/4 inch at 50 yards, 1/8 inch at 25 yards, etc.

Adjust the elevation and windage settings:

1. Remove the dial covers.

2. Use the raised bar on the dial cover, a coin or screw driver to make the adjustments.

3. Turn the adjustment dial in the appropriate direction as indicated by the arrow on the dial. Move the dial in the direction you wish the bullet’s point-of-impact to change.

Mounting the StrikeFire II

To get the best results from your StrikeFire II red dot, proper mounting is essential and, although not difficult, the correct steps must be followed. Your firearm will need to be equipped with a Picatinny or Weaver style rail/base.

To attach the included cantilever ring mount:

1. Attach the lower part of the cantilever ring mount to the rail/base and make sure this is solidly seated in the base groove. To prevent recoil injury, position the ring so that you have at least four inches of eye relief.

2. Be sure the base clamp is hooked around the outside of the rail/base. Press downward and forward toward the muzzle. Then, firmly tighten the base clamp hex nut.

3. Place the StrikeFire II on the lower part of the cantilever ring mount with the adjustment control buttons facing the shooter. Tighten ring cap screws evenly until all are snug—use caution so as not to over-tighten. Once the screws are tightened, the StrikeFire II should not move on the rail/base.

• Matte black featuring a 3 MOA Dot reticle with 11 brightness settings; Mounts easily on most picatinny rails and is compatible with pistols, shotguns, rifles and muzzleloaders
• Waterproof construction: O ring sealed optics stay dry inside, even when totally immersed in water. Parallax - 50
• Shockproof construction: Built to withstand bumps, bangs, drops and the rough and tumble environment of the field
• Nitrogen purged fog proofing: Nitrogen inside the scope ensures interior optical surfaces won’t fog due to humidity or rapid temperature change

User questions & answers

Question:	Will this sight co-witness with magpul mbus blip-up backup sights
Answer:	Yes we have used ours many times. You just need this. https://www.amazon.com/gp/aw/d/B00YEEDJF6/ref=mp_s_a_1_1?ie=UTF8&qid=1490656143&sr=8-1&pi=AC_SX236_SY340_QL65&keywords=boom+pole+holder&dpPl=1&dpID=41Rbc4HYQKL&ref=plSrch
Question:	how long is battery life
Answer:	They are just regular turtle based legs. They will have a bit of resistance when collapsed or when moved into their respective spots. I always just grab the inside leg and the outside and pull them in separate directions. They all should also have a notch in which they lock in place once opened all the way.
Question:	does this come with a mount riser
Answer:	No, this particular model does not.
Question:	I'm kind of on a tight budget I was either think of this or the UTG 4'' ITA red dot. What im wondering is if this one is worth getting
Answer:	Yes. We run Alien Bees and/or White Lightning with a 47" octabox. You will need sand bags just to be safe. If your concern is the 47" box with a 4' arm, remember the 47" box is a diameter measurement, you will only need half that to clear the holding arm.

Product features

Waterproof Construction and Nitrogen-Purged Fog-Proofing

Featuring nitrogen-purged fog-proofing, this red dot sight will not fog up due to humidity or rapid temperature changes, so you can always clearly see the red dot and your target. The optics are O-ring sealed and will stay dry even when fully immersed in water.

Adjustable Brightness for Better Target Acquisition

The TRS-25 has adjustable brightness settings from 1 to 11, illuminating the 3 MOA dot reticle inside to better help you with target acquisition. And by choosing lower brightness settings, you can prolong the red dot’s battery life.

Shockproof Construction for Maximum Durability

Built to withstand bumps, bangs, and drops, the TRS-25 comes in strong, precision-engineered housing and is perfectly suited for the rough-and-tumble environment of the field. You'll never have to worry about damaging this red dot sight.

Bushnell: The Industry Leader in High-Performance Sports Optics

Since 1948, our guiding principle has been to provide the highest-quality, most reliable and affordable sports optics on the market. Our award-winning products enhance the enjoyment of every outdoor pursuit and empower everyone to get out and experience their passion. Combining cutting-edge design and performance with a commitment to being accessible to all, Bushnell is the most recognized and reputable sports optics brand in the world.

• Reticle allows for 4 different styles. Dot, Circle/Dot, Crosshair/Dot, Crosshair/Circle/Dot combinations. All in one sight!
• A 33mm lens provides quick target acquisition. Wide field of view to maintain situational awareness.
• Very sturdy and secure rail mounting system. Will not come loose, made to last.
• Parallax corrected & unlimited eye-relief, where the dot goes, so does the bullet!
• Ultralight, waterproof and shockproof - Powered one 3V lithium battery (included).

User questions & answers

Question:	What length pic rail is required? 5 slot or 7 slot
Answer:	Hello, I am a nerf gun modder (somewhat) and yes, you can use this on a nerf gun, however, you need a picatinny rail to use the sight. This is a link to the Worker Picatinny Rail for the Retaliator. https://www.amazon.com/Worker-Picatinny-Weaver-N-Strike-Retaliator/dp/B019B63KJ6/ref=sr_1_6?s=toys-and-games&ie=UTF8&qid=1522598908&sr=1-6&keywords=worker+picatinny+rail+nerf
Question:	How does this sight power on
Answer:	Hey Kevin ... I don't think you want to put this red dot sight on your glock because it would be just too big and too heavy for a pistol. I would not recommend it. Hope this would help you out.
Question:	Is it a nerf gun sight
Answer:	The right side
Question:	Can be installed on the glock pistol
Answer:	According to the Sig Manual it states that it has 8 daytime and 2 NV (night vision) settings. So in theory it should. I, however have not tried it, since I do not own any infrared equip. lights etc.

Product features

Feyachi RS-28 4 in 1 Reflex Sight

A 33mm sighting system allows for fast target acquisition, and the open design allows the shooter to stay aware of the surroundings. Creates wide field of view, designed for target shooting and hunting. The dot system is adjustable for red or green and any one of four different styles of reticle. Like getting 4 different sights in one! Lightweight, yet tough and with the rail attachment system it securely mounts to your rifle or shotgun and will last.

Zeroing:

Select the reticle you desire by turning the reticle selector knob and set your intensity at the best position. With the sight mounted, rest the gun on a solid support and aim at a target 50 to 100 yards away. Test shots should be done in the same conditions to achieve maximum accuracy for adjustment, for which the use of firm rest for firing and same type cartridge is recommendable. Each click adjustment moves the point of impact by 1 MOA (approximately 1"± at 100 yds, 1/2"± at 50 yards)

Features

• Dual Illuminated
• 4 Reticle Patterns
• 5 Brightness Settings
• 33mm Wide Field of View
• Parallax Corrected & Unlimited Eye-relief

Notice

This reflex sight is assembled manually, so 0.1% of them may not 100% perfect when first time use. It would be highly appreciated if you could send us a message if there is any problem with this sight. (Lens cracked, Can't hold zero etc.)

We will provide best solution for you.

4 Reticle Patterns

• Starburst
• Cross
• Bulleye
• Dot

Dual Illuminated

• Red & Green
• 5 Brightness Settings （"R" & "G" are "off " mode）

Specification

• Magnification: 1x
• Objective aperture: 33mm
• Field of View: 15.8@ 100m
• Windage/Elevation Click Value : 1 MOA per Click
• Adj. Range: +/- 30 MOA
• Eye Relief: Unlimited
• Length: 82mm
• Battery: 1xCR2032
• Weight: 4 oz
• Size: 3.2*1.5*2.1

Inside the Box

• 1 x 4 Reticles Reflex Sight
• 1 x Rubber lens Cap Cover
• 1 x Cleaning Cloth
• 1 x CR 2032 Battery
• 2 x Wrenches

NOTICE

Feedback from some customers states that the sights are blurry or it shows double images.Please don't worry,It just need 3-5 minutes to preheat when you first time to use it.(Just turn on and let it stay for 3-5 minutes).Then it will show clearly.

If it still results the same, please do not hesitate to let us know before you low rating, we will try our best to help you out.

• Ideal for rifles with shorter actions, semi-automatic firearms and magnum handguns
• Reflex collimator sight with LED. Anti-reflex, all surfaces and multi-layer
• ACET technology allows 50,000 hours of operation on one battery. Lithium DL1/3N or 2L76 battery included
• Submersible to a depth of 5 m (15 ft.). Withstands shock

User questions & answers

Question:	does the 9000SC come with rings? if so, are they low, med, or hi
Answer:	This dot came with low rings
Question:	What size battery does this take
Answer:	This Aimpoint takes the 3 volt, size 1/3N battery.
Question:	what is the weaver ring hight that comes with the scope
Answer:	No rings are included with this scope.

Product features

Aimpoint 9000SC 30mm Tube Red Dot Reflex Sight – 2 MOA - 11417

• Ideal for rifles with shorter actions, semi-automatic firearms and magnum handguns
• Reflex collimator sight with LED. Anti-reflex, all surfaces and multi-layer
• ACET technology allows 50,000 hours of operation on one battery. Lithium DL1/3N or 2L76 battery included
• Submersible to a depth of 5 m (15 ft.). Withstands shock

Product description

Sig Sauer ROMEO7 full-size red-dot sight provides the civilian and armed professional with a robust 1x aiming solution optimized for today's MSR platforms, regardless of caliber. The battery life lasts an amazing 62, 500 hours (on medium setting) and the low AA battery compartment allows for quick battery replacement without having to remove the sight from the firearm. The high performance lens coating allows for not only excellent light transmission and zero distortion, but also allows for the highest possible dot brightness. Features Low Dispersion (LD) glass lens design with high performance coatings for excellent light transmittance and zero distortion. The 2 MOA dot is optimal for close quarters battle to mid-range target engagement. The ROMEO7 includes both a standard QD mount and a low-rise fixed mount to fit a variety of systems. Dependable waterproof (IPX-7 rated for complete water immersion up to 1 meter) and fog-proof performance. The ROMEO7 was engineered with the centerline of the optical axis at 1. 535" above the top of an M1913 Pica tinny rail interface for night vision compatibility. FEATURES Low Dispersion (LD) glass lens design with high performance coatings for excellent light transmittance and zero distortion MOTAC (Motion Activated Illumination) powers up when it senses motion and powers down when it does not. Provides for optimum operational safety and enhanced 62, 500 hours of battery life in medium illumination setting Ready to mount with a low profile cross bolt M1913 STANAG-compliant mount and 1. 535" QD riser mount Dependable waterproof (IPX-7 rated for complete water immersion up to 1 meter) and fog-proof performance.

• Sig Sauer Romeo 7, Sight, 1X30mm, Fits M1913 Rail, GraphiteFinish, Full Size, 2 MOA Red Dot, 0.5MOA Adjustments SOR71001

User questions & answers

Question:	how do I determine which Romeo 7 to pick
Answer:	It is a half thumb pair and the underside of the thumb is lightly padded but it wears away quickly.
Question:	Does this red dot have a 3 moa or a 2 moa? i'm pretty sure they're only made with a 2 moa but your advertisement says
Answer:	According to the chart, you'd need an X-Large.
Question:	What would be a good qd mount for this
Answer:	Buy medium or large and it will still fit perfectly.
Question:	Good day.. i would like to inquire about the sig sauer 7 romeo red dot 3 rail gun scope if it can be directly shipped from us to my home address here
Answer:	Lol oddly enough both my lifting straps and tape measure are in my nightstand right next to me. I just measured they are exactly 21.5 inches end to end. Hope that helps. They are good straps. I've kick the crap out of them and not a single stitch has come loose and there are no signs of wear. I hold up bars with over 300 on them often and they've held up for about ten months now very well. Harbinger is the only brand of straps and gloves I ever use; I've never had a problem.

Product features

Romeo 7 Red Dot Sight

The ROMEO7 full-size red-dot sight provides the civilian and armed professional with a robust 1x aiming solution optimized for today’s MSR platforms, regardless of caliber. The battery life lasts an amazing 62,500 hours and the low AA battery compartment allows for quick battery replacement without having to remove the sight from the firearm.

Motac

Activated through motion sensing technology, MOTAC immediately powers up illumination when it senses motion and powers down when it does not in order to extend battery life.

Spectracoat

Highly efficient, ultra-wide broadband, anti-reflection lens coatings reduce surface reflections to extremely low levels across the entire visible spectrum providing superior light transmission.

Stealth ID

Electro-Optics industrial design inspired by our legendary firearms; deflection armor trapezoidal surfacing breaks up the shape and visibility of the optic along with pistol slide serrations and grip checkering to add function to the form of all SIG SAUER electro-optics.

Product description

When your rifle, shotgun or rimfire just needs a simple point of aim and none of the frills, the Crossfire should be at the top of your list. The 2 MOA dot is quick to acquire in close-quarters scenarios, while remaining fine enough to promote pin-point accuracy at extended range. In addition to looking awesome, the included skeletonized lower 1/3 co-witness mount provides a rock-solid and extremely lightweight platform for your red dot. The Crossfire is a no-nonsense sight for near any application.

• The updated Crossfire red dot is a no-nonsense sight for near any application, and when your rifle, shotgun, or rimfire needs a simple point of aim and none of the frills, the Crossfire should be at the top of your list.
• With up to a 50, 000 hour battery life and night-vision compatibility at the lowest two settings, the sight will keep working in a variety of conditions. The low and skeletonized lower 1/3 co-witness mounts provide vesatility for this lightweight optic.
• The 2 MOA dot is quick to acquire in close-quarters, while remaining fine enough to promote pin-point accuracy at extended range. 11 illumination settings allows shooters to change the dot intensity to the situation at hand.
• Increased light transmission with multiple anti-reflective coatings on all air-to-glass surfaces. Unlimited eye relief for rapid target acquisition.
• Highly durable hard-coat anodization provides a low-glare matte surface and helps camouflage position. O-ring seals prevent moisture, dust and debris from penetrating for reliable waterproof performance
• Included Components: Crossfire Red Dot (Led Upgrade)

User questions & answers

Question:	Weight of item only
Answer:	Hello, This product is not a aim scope, it is only a laser. We only adjust it to be straight about at 10-15 meters at factory. There are four small screws at the bigger end to adjust if the laser is not in the center. But we don't suggest customers to adjust that. Freely contact us if there is off-center issue, we will arrange a replacement. Thanks for your asking! Customer Team of StrongTools
Question:	Can you get a quick detach mount for this red dot
Answer:	Yes, the second smallest adapter will fit 223 barrel.
Question:	Night vision compatable? What does this actually mean? Has amyone used it at night? Can you actually see
Answer:	Dear customer, If it is only a little bit bigger than your barrel, we suggest you to sand it by hand. We don't suggest to fix it on machine, because it is aluminium material, the small rod is easy to be bent. Then will cause off-center issue. Please contact the customer service team, we will provide professional solution. Thanks! Customer team of StrongTools
Question:	Does this sight come with a riser
Answer:	Dear customer, This is only green laser boresighter. You can't switch it to red. If you need red laser, you need to buy a new red one. I hope this helps you to understand the product. Thanks for your asking! Customer team from StrongTools

Product features

2 MOA Dot Reticle

The daylight bright red dot is easy to see and paints targets regardless of lighting conditions or background.

The key thing to remember when shooting with the Crossfire Red Dot is to keep both of your eyes open! Shooting with both eyes open allows you to take full advantage of your peripheral vision to get on target very quickly. Eye placement is not critical.

Windage and Elevation Adjustments

The Crossfire Red Dot incorporates elevation and windage dials with audible clicks. Each small click will move the point-of-impact one Minute of Angle. 1 MOA will closely correspond to one inch at 100 yards, 1/2 inch at 50 yards, 1/4 inch at 25 yards, etc.

Remove the turret cap and use the raised bar on the cover or a coin to turn the adjustment dial. Move the dials in the direction you wish the bullet’s point-of-impact to change. Turning the elevation turret counter-clockwise will raise the elevation. Turning the windage turret clockwise will move the point of impact to the left.

Mounting the Crossfire Red Dot

The Crossfire Red Dot can be mounted on a variety of platforms using the high mount or low mount.

• Attach the unit to the rail/base with the illumination dial positioned on the right side.
• Make sure the mount is solidly seated in the base groove. In order to prevent recoil injury, position the Red Dot so you have at least four inches of eye relief.
• Be sure the base clamp is hooked around the outside of the rail/base.
• Press the Red Dot downward and forward toward the muzzle. Then, firmly tighten the base clamp bolt using the hex wrench.

Product description

If you want a high-quality red dot sight but don’t want to break the bank, the StrikeFire II is a great choice. The sleek, rear-facing controls allow for easy adjustment of its ten dot intensity levels; the lowest two settings are night-vision compatible. It features a 30mm aluminum alloy chassis, extra-high recoil rating, and is waterproof and fogproof for ultimate reliability.

• The Strikefire II Red/Green Dot is a rugged, reliable red dot sight that is at home in a variety of shooting applications. It allows the shooter to operate between two dot colors and ten brightness settings to easily adjust for changing conditions.
• Fully multi-coated lenses provide a clean and bright, unobscured point of view. Unlimited eye relief allows for rapid target acquisition.
• The single-piece chasis is compact and lightweight but still delivers shockproof performance withstanding both recoil and impact. Nitrogen purging and o-ring seals ensure fogproof and waterproof performance.
• An offset cantilever mount is provided; allowing you to move the sight forward to be used in conjunction with a magnifier and backup iron sights all on the same rail.
• With aesthetics and functionality in mind, the power controls are at the rear of the Strikefire for easy access. The Strikefire II runs off a CR2 battery. Vortex Optics hat included, hat color may vary.

User questions & answers

Question:	Will this fit on a h&r single shot rifle
Answer:	It fits a Picatinny rail. You can likely install one if your firearm doesn't already have one.
Question:	What is the expected battery life on this
Answer:	Sorry for jumping in here late, but just wanted to add that John was 100% correct on his answer. If the brightness is set too high for the ambient light conditions, you can get a "starburst" effect. We recommend running red dot sights at the lowest brightness setting that you can still clearly see the dot (the exact setting will depend on ambient light)
Question:	How easy will it be to see a man sized target at 300m
Answer:	That shouldn't happen. Best is to contact them, I believe they will replace faulty red dot sights. The laser and red dot are independent from each other. If you push the Red Dot button it should turn on. & When you turn off you have to press it for like 5 seconds. Just contact the company.
Question:	HOW CLEAR ARE THE RED AND GREEN DOTS
Answer:	I have a magpul flip up rear and iron on the barrel. My red dot sight is mounted just in front of of the flip rear. My reticle when sighted hovers just above my front iron sight but I can see my magpul rear through the optic if need be. Hope this helps. I love this optic on my AR

Product features

StrikeFire II Red Dot (SF-RG-501) & Hat

When situations demand split-second target acquisition and maximum field of view, mount up the StrikeFire II and shoot—both eyes open. Feature-rich, versatile and reliable, the StrikeFire II is a great choice for shooters who want a quality red dot sight. Features sleek rear-facing controls for power on/off and easy adjustment of ten dot intensity levels—lowest two settings are night-vision compatible. Automatically returns to the last dot intensity used when powered up. The 30mm aluminum alloy chassis provides extra-high recoil rating and is waterproof and fogproof. Strike fast!

The lower 1/3 co-witness cantilever mount model is ideal for rifle platforms, positioning the optic bore center 40 mm above the base surface.

Red/Green Dot Reticle

The 4 MOA Red/Green Dot is ideal for situations that demand split-second target acquisition. Choose among ten variable illumination settings—the lowest two settings are night-vision compatible.

The key thing to remember when shooting with the StrikeFire II red dot is to keep both your eyes open! Shooting with both eyes open allows you to take full advantage of your peripheral vision to get on target very quickly. Eye placement is not critical. As long as you can see the dot, you’ll hit your target!

Windage and Elevation Adjustments

The StrikeFire II red dot incorporates elevation and windage dials with audible clicks. Each small click will move the point-of-impact 1/2 Minute of Angle (MOA). 1/2 MOA will correspond to 1/2 inch at 100 yards, 1/4 inch at 50 yards, 1/8 inch at 25 yards, etc.

Adjust the elevation and windage settings:

1. Remove the dial covers.

2. Use the raised bar on the dial cover, a coin or screw driver to make the adjustments.

3. Turn the adjustment dial in the appropriate direction as indicated by the arrow on the dial. Move the dial in the direction you wish the bullet’s point-of-impact to change.

Mounting the StrikeFire II

To get the best results from your StrikeFire II red dot, proper mounting is essential and, although not difficult, the correct steps must be followed. Your firearm will need to be equipped with a Picatinny or Weaver style rail/base.

To attach the included cantilever ring mount:

1. Attach the lower part of the cantilever ring mount to the rail/base and make sure this is solidly seated in the base groove. To prevent recoil injury, position the ring so that you have at least four inches of eye relief.

2. Be sure the base clamp is hooked around the outside of the rail/base. Press downward and forward toward the muzzle. Then, firmly tighten the base clamp hex nut.

3. Place the StrikeFire II on the lower part of the cantilever ring mount with the adjustment control buttons facing the shooter. Tighten ring cap screws evenly until all are snug—use caution so as not to over-tighten. Once the screws are tightened, the StrikeFire II should not move on the rail/base.

Product description

Sig Sauer ROMEO5 compact red dot sights provide civilians and armed professionals a robust 1x aiming solution for any situation.

Ultra-low parallax so point-of-aim is point-of-impact and the red dot remains parallel to the bore of your firearm, no matter what your viewing angle is relative to the optical axis of the sight.

Unlimited eye-relief allows you to acquire the aiming point and the target regardless of the position of your eye behind the sight.

The readily available CR2032 battery is side-loading, allowing for quick battery replacement (featuring 50,000+ hours or more of life).



FEATURES:

• 2 MOA Red-Dot provides 10 illumination settings (8 daylight plus 2 NV) for visibility in all light conditions
• MOTAC (Motion Activated Illumination) powers up when it senses motion and powers down when it does not. Provides for optimum operational safety and enhanced 50,000+ hour battery life
• Integrated M1913 Picatinny interface provides industry-standard mounting options for a wide range of applications
• Dependable waterproof (IPX-7 rated for complete water immersion up to 1 meter) and fog-proof performance
• Includes a M1913 Picatinny low mount riser and a co-witness 1.41"" riser mount

TECH SPECS:

• Magnification: 1x
• Objective Clear Aperture: 20 mm
• Eye Relief: Unlimited
• Illumination Settings: 8 Daytime / 2 NV
• Elevation Adjustment Range: +/- 40 MOA
• Windage Adjustment Range: +/- 40 MOA
• Reticle: 2 MOA Red Dot
• Adjustment increments: 0.5 MOA
• Battery: CR2032

• 100% Other Fibers
• Made in the USA or Imported
• 2 MOA Red-Dot provides 10 illumination settings (8 daylight plus 2 NV) for visibility in all light conditions
• MOTAC (Motion Activated Illumination) powers up when it senses motion and powers down when it does not. Provides for optimum operational safety and enhanced 40,000+ hour battery life
• Integrated M1913 Picatinny interface provides industry-standard mounting options for a wide range of applications
• Dependable waterproof (IPX-7 rated for complete water immersion up to 1 meter) and fog-proof performance
• Includes a M1913 Picatinny low mount riser and a co-witness 1.41in riser mount

User questions & answers

Question:	Will this optic work on my Springfield saint ar
Answer:	It might work for anything over 100 yds. But it works for 100 yds and less.
Question:	Why cant this item ship to my location. Im in Southern California
Answer:	Because California is afraid of anything that looks like a firearm. Just try to read thru CA Penal code Part 6 Title 4 § 30715 (2019). These folks are crazy.
Question:	I live in CA and listing says it cannot be shipped to my address. Is there a reason for that
Answer:	I don’t believe this to be a legality issue, the Romeo 4 can be shipped here along with most others. Romeo 5 and Nikon Tactical can not for some reason. I got the Romeo 5 6 months ago and it shipped here. Screw amazon and order from sig or another retailer.
Question:	Will this stay zero'd on an ar
Answer:	Yes it will stay Zeroed on an AR-15. We have several mounted on Everything from 5.56 7” pistol, .300 blk pistols , carbines. Including car guns and 3 gun rifles. They hold zero even with hard use and frequent barrel dumps. Best red dot scope for the $$

Product features

ROMEO 5 Red Dot Sight

The ROMEO5 features our MOTAC (Motion Activated Illumination) which increases battery life by shutting down the system when not in use and instantly activates the system when it senses the slightest vibration or movement. Your sight will be up when you go into action. The ROMEO5 will mount on any platform and the solid aluminum design will give peak performance and years of service.

Motac

Activated through motion sensing technology, MOTAC immediately powers up illumination when it senses motion and powers down when it does not in order to extend battery life.

Spectracoat

Highly efficient, ultra-wide broadband, anti-reflection lens coatings reduce surface reflections to extremely low levels across the entire visible spectrum providing superior light transmission.

Stealth ID

Electro-Optics industrial design inspired by our legendary firearms; deflection armor trapezoidal surfacing breaks up the shape and visibility of the optic along with pistol slide serrations and grip checkering to add function to the form of all SIG SAUER electro-optics.

• Shockproof and water resistant, the gun sight can hold the recoil and keep zero well
• Loop-top prevents the lid of the dot sight windage/elevation adjustment would not be lost
• Come with cantilever mount which fits for 20 mm rail, the sight is easy to install
• 5 illumination intensity, you could select different type to meet your need
• The dot sight is equipped with removable, spring loaded flip lens cover

User questions & answers

Question:	Will this work on a Stevens Model 320 20 gauge pump shot g un
Answer:	Hello, According to my husband. It will not fit.
Question:	I have a front fixed iron site will I be able co witness this red dot site
Answer:	Absolutely. If you have an AR with either backup iron sights, or a fixed front site post, this sight will co witness just fine. In fact it works fine with with the vortex 3x magnifier too. The previous answerer did not know of what you were asking, or was unfamiliar with AR’s
Question:	Can you see at night with this scope
Answer:	it is not a night vision scope
Question:	Would this be a good choice for a .22 rifle
Answer:	You can use on a 22 yes and you can sight it in more then 50 yards if need be

Product features

Specification

-- Weight: 308g/10.9oz

-- Tube Dia: 40mm/1.58inch

-- Length: 120mm/4.72inch

-- Objective Dia: 35mm/1.38inch

-- Magnification: 1x

-- Field of View @ 100 yards: 60°

-- Eye Relief: Flexible

-- Adj.Range: +/- 30 MOA

-- Windage/Elevation Click Value: 1MOA per click

-- Runtime: 110-220 hours

Windage & Elevation

• Windage and elevation are easily and fully adjustable so you’ll never have a problem obtaining an accurate zero.

Extra Long Battery Life

• Battery Life up to 110-220 hour.
• Battery: CR2032 (Include)

Cantilever Mount

• Come with cantilever mount which fits for 20 mm rail. It will fit all Picatinny Rail and Weaver Rail sections.