13 best rifle scope with weaver rings

Product description

Bestsight Rifle Scope Mount Rings 1 inch/ 30mm Cantilever for 20mm Picatinny Rail Dual Ring Adjustable Shooting





Specifications:



Material: Aluminum Alloy

Color: Black

Ring Diameter: 30mm (1.2”)

Reducer Diameter: 25.4mm (1”)

Product weight: 0.5lbs.

Package dimensions: 7.0 inch x 2.5 inch x 2.56inch





Package includes:

1 x Dual Ring Scope Mount

2 x Plastic ring diameter 1 inch(25.4mm)

1 x Wrench

• Fits 20mm picatinny weaver rails and for both 30mm and 25.4 mm (1 inch) body tube rifle scopes.
• [More Stable]Use of 6 screws in total is more stable and secure than 2 screws on standard mounts
• [Easy to Operate]Scope mount with two round buttons for easy detach.
• [Suitable for High Recoil]Hold up under heavy recoil sustained fire in the most extreme shooting circumstances.
• Defect: Whether it is installed or disassembled, you need to remove 12 screws

User questions & answers

Question:	Will this work on my cva scout v2 .45-70 govt
Answer:	Go with a mount with no forward cant. This is to push the scope forward and still be able to mount to the receiver.
Question:	do the screws holding the scope need to be torqued to specific amount
Answer:	It will work on any firearm regardless of caliber as long as the firearm has a mil spec 1917 picatinny rail or equivalent on top. Since you asked 7.62x54r, I'm going to guess Mosin Nagant. You'll need an adapter to mount this. Also, you might be better served with scope rings instead as they allow for a lower scope placement. This mount was designed for AR style weapons so it rests quite high.
Question:	Can this be mounted on gamo 6110017154 varmint air rifle .177 cal
Answer:	This item will fit on a Ruger Precision Rifle, but is designed to push the scope forward for more eye relief. I believe the standard model or the extended version would be a better fit on a bolt action rifle than this SPR mount.
Question:	what is the ring height from base of the mount to bottom of the ring? Will this fit a 54 mm objective lens scope on a flat top pictanny rail
Answer:	This is made in the USA at their factory in Tacoma, WA.

Product description

Weaver Quad Lock Detachable Rings off two straps and four screws provide added gripping power. The rings are lightweight and all-aluminum. Thumbscrews allow for quick detach. These rings feature the positive dovetail locking system and boast rear mount windage adjustments. They offer maximum strength in steel construction and top-notch recoil resistance for the ultimate hold on your scope. Weaver rings can handle any scope-mounting need. Whether you're looking for our classic Weaver's original cross-lock Top Mount, windage adjustable or dovetail extension rings; we have many great options. These rings are available in a variety of choices including aircraft-grade aluminum options or Grand Slam steel, and many more.

• Ring diameter: 1 inch
• Height: medium
• Finish: matte black
• Quadlock Detachable Aluminum Rings
• Two straps and four screws provide added gripping power
• Lightweight, all-aluminum rings
• Thumb screws allow for quick detach

Product features

WEAVER Quad Lock 1-Inch Medium Detachable Rings

These rings feature two straps and four screws for added gripping power for these lightweight, all aircraft aluminum rings.

• Double 1'' scope ring mount for Picatinny/ Weaver Rail (21mm).
• Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope.
• Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately.
• The ring is for most scopes which are in 1''/ 25.4mm scope tube. High profile, 0.98'' gap from base of mount to bottom of rings. ( Item height: 2.1'')
• With only 1 rail clamp screw and 1 scope clamp screw per side, just twist off the nut and mount the base on the 20mm rail easily.

User questions & answers

Question:	the small metal piece that i mount to Picatinny rail wont sit flush. its not tall enough. what do I do about this? Is there a fix or do i return it
Answer:	Ap210500 is that part number
Question:	Will these work on a Ruger ar-556 without having to remove the front sight from factory
Answer:	You need a T15 Torx driver to screw them in. Don’t over tighten them though. I believe you can get replacement screws directly from Aero. They sell them separately.
Question:	I will be mounting on a Del-ton ar15 with fixed front iron sights. Will I still be able to use the sights and will the scope clear the front sight
Answer:	I do not have fixed front sights on my AR. I have flip down Troy sights. But you should see right through your fixed sight.
Question:	Will this be adequate for mounting a scope on an AR
Answer:	SPR is a bit more forward for clearance for you to access your charging handle.

Product features

Scope mounting rings are essential pieces of equipment for avid hunters and shooting sports enthusiasts.

A fantastic rifle and a premium scope needs high quality scope rings to hit the mark consistently with competition grade accuracy each and every time. Modkin Scope Mounts turn every hunting/shooting trip into a memorable one.

• Fits all 21mm picatinny and weaver rails.
• The ring is for most scopes which are in 1''/ 25.4mm scope tube.
• Precision machining from aircraft-grade aluminum alloy, solid and sturdy construction.
• Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately.
• With only 1 rail clamp screw and 1 scope clamp screw per side, just twist off the nut and mount the base on the 21mm rail easily.

Hunting

Adventure

Training

• ☑ Double scope ring mount for Picatinny/ Weaver Rail (21mm).
• ☑ Design in see-through style, provide potential visibility for open sights, meanwhile hollowed-out configuration helps to release heavy duty when clamping your scope.
• ☑ Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately.
• ☑ The ring is for most scopes which are in 1''/ 25.4mm scope tube. Medium profile, 0.5'' gap from base of mount to bottom of ring. ( Item height: 1.9'')
• ☑ With 1 rail clamp screw and 2 scope clamp screw per side, ensure mount any 1'' scope firmly, just twist off the nut and mount the base on the 20mm rail easily.

User questions & answers

Question:	Will this mount on a marlin xl
Answer:	It should with std rails
Question:	what do you thing of this product
Answer:	Yes it will fit, the mount comes with polymer inserts for different sized tubes.
Question:	Will these rings handle the recoil of a .300 win mag. the rifle does have a muzzle break. Brings the recoil down to less than 30-06 levels
Answer:	This mount detachable 30mm rear ring with 1 inch inserts.For use with riflescopes of both 30mm and 1 inch main tube.
Question:	Are these fit 20mm rail
Answer:	As long as you have either a picatinney, dovetail, or standard rail that is 3" it will fit, If it is shorter than 3" you will need a rail adapter.

Product features

If you are a avid hunters and shooting sports enthusiasts, the Modkin Scope Mounts are essential pieces of equipment for you.

• Fits all 21mm picatinny and weaver rails.
• The ring is for most scopes which are in 1''/ 25.4mm scope tube.
• Built-in tape inside per ring to prevent from marring the scope, also prevent sliding and holding postion accurately.
• With 1 rail clamp screw and 2 scope clamp screws per side, ensure mount any 1'' scope firmly, just twist off the nut and mount the base on the 21mm rail easily.
• Precision and Repeatable Alignment.

Adventure

Training

Hunting

Product description

Description:

Specifications:

Fits all standard 20mm Picatinny rail

Magnification: 3x-9x

Obj. diameter: 40mm

Reticle Type: Rangefinder

Brightness control: Red 5 levels / Green 5levels

Lens color: Blue

Field of view: 25'-14'@100yards

Eye relief: 3.3-2.7"

Windage & elevation click value: 1/4MOA 1/4"@ 100yards

Exit pupil: 13.3mm-4.4mm

Tube diameter: 25.4

 

 

Package Includes:

1x 3-9x40 Rifle Scope

2x 1-inch high mount

1x CR2032 battery

1x Cleaning Cloth

1x Manual

If any problem feels free to contact us, we are always here willing to help you

• 🍂3-9X40 RIFLE SCOPE: OMMO rifle scope with green and red illuminations, 5-level brightness available, magnifications from 3X up to 9X, equipped with the superior eyepiece, rifle scopes long range provide you ultimate clarity
• 🍂HIGH PERFORMANCE & RELIABILITY: The field of view of OMMO sight riflescope is 13.41-40.38 @100yds. The windage & elevation click value: 1/4 MOA 1/4" 100 yards, and with 2.7”-3.3” eye relief. Green and red mil-dot reticle provides outstanding accuracy for mid to long-range targets
• 🍂WATERPROOF & FOG-PROOF: OMMO rifle scopes with free mount, nice for hunting, with aviation-grade aluminum scope body, more impact resistant and light. the O-ring sealing and nitrogen filled reticle ensures outstanding water-proof and fog-proof performance
• 🍂FULLY MULTI-COATED LENS: OMMO riflescope 4x, 40 mm object lens with HD performance multi-coated lenses, increase light transmission with multiple anti-reflective coatings on all air-to-glass surfaces. (Fully multi-coated glass provides good light transmission than others)
• 🍂ADJUSTABLE DIOPTER& WITH WEAVER: OMMO 3x9x40 rifle scopes with locking diopter, provides fast, simple aiming points for various shot distances. The premium two 1’’ complementary scope rings to be easily mounted onto any 20mm Picatinny or Weaver mount rails

User questions & answers

Question:	What is the rifle scope total length
Answer:	I wouldn't recommend this product. Mine failed after only 32 rounds on a 6.5 creedmore, which is very low recoil and, as a bolt action PRS, doesn't get banged around like an MSR would.
Question:	Can I put this on a Barrett .50 cal
Answer:	Yes it will work on there just fine
Question:	Can you use the iron sights through mounts
Answer:	Depends on distance mainly. 100 yards or less pretty straight on. otherwise you will have to calibrate based on distance and your factors. I calibrate with a Laser and top line on the rectile.
Question:	will this scope withstand the recoil of a 308 rifle
Answer:	As long as it has or you can mount a picanty rail on it, it should work.

• Material: scope rings for hunting shooting. 2 pairs of Rifle Rifle Rings are made of T6 6061 Aluminum Alloy with High Strength Steel and Matte Black.
• Installation: The mounting rings are very easy and quick to install and remove. It has the ON / OFF screw clamp nut through the Allen key, scope rings also has 1 rail clamp screw and 2 scope clamp screw on one side.
• Dimensions: Our two rifle rings are perfect for standard 8mm Picatinny / Weaver style rails and are perfect for mounting scopes rings that are on 48mm scope tube. Its weight is 2 ounces per ring and a gap of 0.5 inches from the base of the bracket to the bottom of the ring.
• STYLE & DURABILITY, SOLID - A gothic rifle sight ring has standard Picatinny rail and durable solid matte black woven sight rings.
• Includes: Package includes 2 pairs. One pair includes 2 low-profile 48mm rings, and second pair includes 48mm medium profile rings. Also 100% satisfaction with high quality and 24/7 hours of customer service.

User questions & answers

Question:	will this fit the Savage axis
Answer:	I highly doubt that it is flammable and it does not say "flammable" on the tube. The only alcohol I see listed is way down on the list (benzyl) and I also notice there is a small amount of castor oil.
Question:	Is this the right mount for my Savage model 93 bolt action
Answer:	You will have to pick a different seller. That one that stated 1-2 months is out of stock.
Question:	is this the right piece for savage axis/edge
Answer:	I think there were 6. I don’t think L’Oreal makes this anymore. I use Marc Anthony Curls, in a yellow bottle.
Question:	I don't understand... What advantage is there in me installing this
Answer:	Yes, but, if you have fine hair, this mousse will make your hair feel a bit greasy. Thus, while your curls might last, you will need to wash sooner than if you did not use this product.

Product description

SPECIFICATION:

Center height: 0.74 inches (18.7 mm)

Ring Diameter: 1" (25.4mm)

Rail Type: 20mm Picatinny and Weaver rails

Material: Light Weight Aluminum

Weight of Two Pieces: 2.46 oz / 70 g

Package: 2 x scope rings & 1 x allen wrench

• The double tactical low profile scope mount fit for 1 inch / 25.4mm scope tube on the picatinny/weaver rails.
• The height from the center of the riflescope tube to the picatinny base is 0.74 inches (18.7 mm).
• With one mountings screws on the base and four screws on each side of the two scope rings. It will hold the riflescope mount securely.
• Precision machined from aluminum alloy with anodized black matte finish. Light weight, only 2.46oz/70g.
• Easy to install. Note: the rings have a star nut for installation rather than a hex nut and the tool is included.

• Ring diameter: 1 inch
• Height: high
• Material: aluminum
• Quadlock Detachable Aluminum Rings
• Two straps and four screws provide added gripping power
• Lightweight, all-aluminum rings
• Thumb screws allow for quick detach

User questions & answers

Question:	Fit a 3/8" air gun slot and handle airgun recoil
Answer:	I have short hair and I apply it while my hair is wet. After drying, my hair has more volume but is definitely not "crunchy". I would call the hold moderate and have not noticed that it gives my hair any shine.
Question:	Will these rings fit a picatinny rail
Answer:	This gel is extremely wet for some reason I do not recommend it unless you are going for a wet look. It does get hard but not crispy/hard like with other gels.
Question:	Will it fit a 22rifle
Answer:	Hi there! Thank you for your interest in the L'Oreal Paris Hair Care Advanced Hairstyle Lock It Clean Style Gel. Our Lock it Clean Style Gel is specially formulated for daily grooming, our high-performance gel delivers a clean look and feel with extra strong hold and natural shine, all day. While we don't currently have an exact replacement for the Studio Line Melting Gel, you may wish to try the Studio Line Clean Gel for similar results. The Studio Line Clean Gel offers strong yet flexible firm hold for a natural, classic look. We hope this information is helpful.
Question:	Will this item handle a 50mm scope with space between the scope and barrel
Answer:	Somewhat difficult to answer. Depends on the amount used, applied when hair is wet/damp or dry, and whether you brush your hair after letting it dry a bit. I apply it when my hair is mostly dry,in two small amounts and brush my hair after the second application. I like a dry look on my hair and my hair is very fine and tends to follow the slightest breeze. Experimentation is most likely what you will have to do. My hair remains very "soft" after use of the product.

• 【Perfect for All 21mm Picatinny/ Weaver Rails】Modkin 4 Set of Different Heights 1 inch Scope Mount Rings Include 2 Pieces Medium Profile 2 Pieces High Profile In One Package. Our Scope Rings Perfect for All 21mm Standard Picatinny/ Weaver Rails, Available In Two Styles For Your Choice, A Must Have Scope Rings for Hunting Shooting! Perfect for Mounting Most Scopes Which Are In 1 inch / 25.4mm Scope Tube.
• 【Hollowed-Out Design & Built-In Tape Protection】Design In See-Through Style, Provide Potential Visibility For Open Sights, Meanwhile Hollowed-Out Configuration Helps To Release Heavy Duty When Clamping Your Scope. Built-In Tape Inside Per Rings To Prevent From Marring The Scope, Also Prevent Sliding and Holding Postion Accurately.
• 【Premium Aircraft Aluminum, Solid & Durable】Precision Machining of Aircraft Grade 6061 Aluminum Alloy + High Strength Steel In Black Matte Anodizing Finish, Sturdy & Lightweight Construction, High Quality, Sturdy Construction, Build No Wobble, Offer Durable Safe Performance In The Field.
• 【Rail Clamp Screw Design & Easy To Install】With 1 Rail Clamp Screw and 2 Scope Clamp Screws Per Side, Ensure Mount Any 1 inch Scope Firmly, Just Twist On/Off The Rail Clamp Screw Nut Via Allen Wrench and Mount The Base On 21mm Rail, Simple and Quick To Remove Or Install. Comes With 2 Pieces Allen Wrench.
• 【4 Set Of Two Styles 1 inch Scope Rings】2 Pieces Medium Profile - 0.5 inch Gap From Base Of Mount To Bottom Of Ring - Item Height 1.9 inch - Dimension: 1.9 x 1.6 x 0.8 Inch - Weight: 2 Ounce Per Ring; 2 Pieces High Profile - 0.71 inch Gap From Base Of Mount To Bottom Of Ring - Item Height 2.0 inch - Dimension: 2.0 x 1.6 x 0.8 Inch - Weight: 2 Ounce Per Ring.

User questions & answers

Question:	Will these fit a 32mm objective lens
Answer:	IF I AM RIGHT 1 LBS- 6 OZ, YOU CAN FEEL THE WEIGHT
Question:	Would this fit my savage 93 17hmr rim fire rifle
Answer:	A springer air rifle will KILL this scope. It will literally fall apart, mine did. This scope is a good value, but not for spring powered air rifles.
Question:	will these fit the henry ar
Answer:	A good way to set up your scope is to mount your scope and bore sight it. With a bolt action, remove the bolt, set the rifle in a gun vise (like a lead sled), set a target at 25 yards, look thru the bore and adjust the scope to same spot on the target that you see thru the bore. (With a lever gun or semiautomatic, you will need a laser bore site). Fire a shot at the target. You should be on the paper. Adjust the shot to the center of the target. Now set a target at 100 yards and fire a 3 round group. Adjust your scope to the center of the group and fire another shot. This should put you dead center at 100 yards. Follow the ballistics charts for your rifle caliber as a guideline for bullet drop and trajectory. There is no better way to find out what each mil dot represents than to fire your rifle at different ranges to know what yardage each dot will represent.
Question:	Can they fit on 20 moa mount
Answer:	How to mount it on a 7.62x54r

Product features

If you are a avid hunters and shooting sports enthusiasts, the Modkin Scope Mounts are essential pieces of equipment for you.

• Fits all 21mm picatinny and weaver rails.
• The ring is for most scopes which are in 1''/ 25.4mm scope tube.
• Built-in tape inside per ring to prevent from marring the scope, also prevent sliding and holding postion accurately.
• With 1 rail clamp screw and 2 scope clamp screws per side, ensure mount any 1'' scope firmly, just twist off the nut and mount the base on the 21mm rail easily.

Product description

BSA OPTICS Sweet 30-06 4X-12X, 40mm Adjustable Objective, with rings 1/4 MOA. 30/30 Reticle. Adjustable Objective Hunting Scope. Fully Coated Glass Lenses. Shockproof. Waterproof. Fogproof. W/E Adjustment Range: 35. Eye Relief: 3 Inches. FOV LOW @ 100' (ft): 40. FOV HIGH @ 100' (ft): 10. PARALLAX SETTING (yds): 7.5 to Inf. Two-piece weaver style rings included. 1 inch aluminum tube. 1 Year Warranty.

• Sweet 30-06 4X-12X, 40mm Adjustable Objective, with rings
• 1/4 MOA. 30/30 Reticle. Adjustable Objective Hunting Scope.
• Fully Coated Glass Lenses. Shockproof. Waterproof. Fogproof.
• W/E Adjustment Range: 35. Eye Relief: 3 Inches. FOV LOW @ 100' (ft): 40. FOV HIGH @ 100' (ft): 10. PARALLAX SETTING (yds): 7.5 to Inf.
• Two-piece weaver style rings included. 1 inch aluminum tube. 1 Year Warranty.
• Included Components: Scope, Mounts

Product features

BSA Optics SWEET 30-06 4-12X40 AO WR

The BSA Sweet 30-06 AO Rifle Scope is specifically designed for the .30-06 rifles. Complete with 3 ballistically calibrated turrets for 150gr, 165gr, and 180 gr ammunition, the Sweet .30-06 AO also features an adjustable objective, fully coated glass lenses, 30/30 reticle and 2 pc. weaver rings Matte black finish. Waterproof, shockproof and fogproof.

Magnification low: 4; Magnification high: 12

Objective lens diameter: 40 mm

Adjustment MOA: 1/4

Lens Material: Glass; Lens: Fully Coated

W/E Range: 35; Eye Relief: 3 inches

FOV LOW @ 100' (ft): 40; FOV HIGH @ 100' (ft): 10

PARALLAX SETTING (yds): 7.5 to Inf.

Reticle: 30/30

Shockproof, Fogproof, Waterproof

Tube diameter: 1", one piece; Aluminum Construction

• ▶ High quality, precision machining of aircraft grade 6061 aluminum alloy black matte anodizing finish
• ▶ The scope mount ring for picatinny/ weaver rail (20mm). See-through style have more open sights
• ▶ Built-in tape design to prevent the ring from sliding and holding postion accurately.
• ▶ Base is compatible with picatinny mounting systems also compatible with weaver mounts
• ▶ Medium profile, scope mount ring include 4 scope clamp screws, 2 rail clamp screws

• 1 inch diameter scope rings for mounting standard 1 inch diameter tube rifle scopes
• Mounts to any flat top Picatinny or Weaver rail equipped rifle
• High profile in height, 0.395 inches from base of mount to bottom of rings
• Light weight 6061 aerospace aluminum construction
• All Monstrum Tactical mount and accessory products come with a lifetime guarantee

User questions & answers

Question:	Can iron sights on an m&p ar be seen through these mounts
Answer:	The base system gives you the flexibility to install virtually any scope on your rifle. The pre drilled scope mounting holes will not accommodate a scope with a shorter body. It also gives you more flexibility in scope location on the gun.
Question:	Will these work with a thompson/center impact and bushnell banner 3-9x
Answer:	I have straight, course hair, medium length. I use this Loreal Paris Studio Gel after I shampoo my hair and while it is still wet, just put some in your hand and work it though the hair. Then I dry my hair and use the curling iron to give my hair some curl. If I use the Gel, the curls stay in; if I do not use the Gel and use the curling iron, my hair goes straight by the end of the day. I really like this product and would not be without it; otherwise, I would not have ANY curls that would stay in. Give it a try! Good Luck!
Question:	Will this be ok on 20 gauge slug gun
Answer:	It is a clear gel. It gives your hair body and when first applied affects hair like water, making it darker. But when dried no affect.
Question:	Will this work with a 30.06 or is it too much recoil
Answer:	I like this better than melting gel.

• Fits 20mm Picatinny Weaver rails
• Front ring top and both side feature picatinny for mounting laser flashlight and compact red dot and so on accessories.- 1" Rings
• Heavy duty - Scope Mount Weight about 8.38oz
• Mount provides 2" of forward scope positioning on the .223 flat top platform
• Riser Mount for Rifles with Picatinny/Weaver Rail, Ring bases are milled as a single, tough unit, and rear ring tops feature Picatinny tops for mounting additional accessories

User questions & answers

Question:	What is the distance between the two mounting bolts, from internal front edge of the first bolt to the internal front edge of the second
Answer:	Worked on my ar10 with vortex viper pst 5x25x50 so yes it should
Question:	I have a Bushnell 4.5-18x40 scope. Will this mount have enough back and forth adjustment for eye relief? mounting on flat top ar
Answer:	Yes it should work.
Question:	What aluminium is made of: 6061 or
Answer:	Man don’t want to give bum info I used this to mount a vortex Diamondback tactical 12x40 on a SIG 716 , I would suggest you call vortex they give awesome customer service
Question:	Can I turn this around and have the scope extend rearward over the stock for closer eye relief
Answer:	With the flat top that I have it works because it moves the scope forward to get my eye relief. I have a very small area to mount a scope, without this feature I wouldn’t be able to mount one.

Product features

1 inch Rings Heavy duty Cantilever Rifle Scope Mount

The mount is built for standard 1 inch tube scopes for mounting to any standard Picatinny rail equipped rifle.

Ring top feature picatinny for mounting laser flashlight and compact red dot and so on accessories

The mount is 5.3 inches in total length. The base is 3 inches long with the mounting bolts spaced 2 inches apart, a minimum of 3 inches of rail space is required to install.