11 best lifetime basketball hoop parts
Lifetime basketball hoop parts refer to components and accessories associated with Lifetime basketball hoops, which are a popular brand of basketball systems known for their durability and quality. These parts are essential for the construction, maintenance, and repair of basketball hoops.
Backboard Components:
- The backboard is a crucial part of the basketball hoop. It is typically made of a durable material like polycarbonate or tempered glass. Replacement backboard options and accessories may include different sizes, materials, and designs.
Rim and Net:
- The rim is the circular hoop through which the basketball is thrown. It is attached to the backboard. Replacement rims and nets may be needed due to wear and tear or damage.
Pole and Base:
- The pole provides support for the backboard and rim.The base is filled with either sand or water to stabilize the hoop. Replacement poles and bases may be required if the existing ones are damaged or need an upgrade.
Hardware and Fasteners:
- Various screws, bolts, and other fasteners are used to assemble and secure the different parts of the basketball hoop. Replacement hardware may be needed for maintenance or repairs.
Padding and Protection:
- Pads are used to protect players from injury by covering potential impact points on the basketball hoop system, such as the pole or backboard edges.
Adjustment Mechanisms:
- Some Lifetime basketball hoops are adjustable in height. Parts related to the adjustment mechanism, such as crank handles or adjustment brackets, may need replacement over time.
Court Marking and Accessories:
- Some basketball hoop systems come with court marking kits for setting up a mini basketball court. Additionally, accessories like basketballs, air pumps, and ball storage solutions may also be associated.
Anchoring Kits:
- Anchoring kits are used to secure the basketball hoop to the ground, providing stability and safety.
Ground Sleeves:
- Ground sleeves are tubes that are installed in the ground during initial hoop setup, allowing for easy installation and removal of the basketball pole.
Replacement Parts for Wear and Tear:
- Over time, various parts of the basketball hoop may wear out or become damaged. Replacement parts for these components ensure the longevity and functionality of the hoop.
When purchasing or seeking replacement parts for a Lifetime basketball hoop, it's important to ensure compatibility with the specific model of the basketball system to maintain the hoop's integrity and performance.
Below you can find our editor's choice of the best lifetime basketball hoop parts on the marketProduct description
This heavy duty classically-styled rim is built to take a slam. The Slam-It Rim is made of 5/8" solid steel with double compression springs for spring-back action. Also includes a all-weather nylon net and hardware.
- 18" Rim is constructed from 5/8" solid steel for suerior strength and durability
- 70G All-weather net and hardware included
- Double compression springs for back action
- Backed by a 5-year limited manufacturer warranty
User questions & answers
Question: | Is this compatible with product #90022 as a replacement rim |
Answer: | Yes! |
Question: | Would this be okay for indoor use |
Answer: | You can use this rim indoors or outside. |
Question: | Is this a replacement for lifetime #90228? Wind storm blew mine over and smashed rim in 2" as well as bent it upwards |
Answer: | the 90228 replacement hoop does NOT come with the U bolt. The long bolts that come with it is unusable. You MUST use original U bolt. |
Question: | What is the bolt spacing |
Answer: | 3.5" side to side and 2.5" up and down |
Product description
This in-ground basketball system from Lifetime Products features a 44 in. Shatterproof Fusion backboard with a Quick Adjust height adjustment mechanism that adjusts from 8 to 10 feet high. It also includes a Classic Rim with an all-weather nylon net and a 3.5 in. diameter round steel pole. So bring the arena home with a residential basketball system from Lifetime Products.
- Features a 44 in. x 30 in. x 2 in. Shatterproof Fusion Backboard, Quick Adjust II Mechanism, 3.5 in. round pole (3 piece), and a Classic Rim.
- Adjustment Mechanism: Raise or lower the rim height from 8 to 10 feet using a broomstick. Now players of any age or skill can enjoy the game at their level.
- Backboard: The Fusion Backboard integrates a polycarbonate playing surface with an unbreakable polyethylene frame for a durable, pro-glass look. The graphics are screen-printed with UV-protected inks for superior color and protection against the elements.
- Pole: Our round steel poles feature a patented friction-weld joint that safeguards against unwanted movement. All Lifetime steel poles are protected with a powder-coated, weather-resistant finish.
- Rim: The original classic basketball rim! The Classic Rim features a 5/8-inch solid-steel ring supported by 1/2-inch braces and an all-weather nylon net.
User questions & answers
Question: | Which sleeve do I need for the 44" Lifetime basketball hoop? (Adjustable, in-ground |
Answer: | You will need model #0023 3.5 in. Ground Sleeve. |
Product description
This heavy duty classically-styled rim is built to take a slam. The Slam-It Pro Rim features a wrap-around brace with double compression springs for spring-back action. Also includes a all-weather nylon net and hardware.
- Features a wrap-around brace with double compression springs for spring-back action!
- 18" Orange rim constructed of 5/8" solid steel; Includes all-weather nylon net
- Built to take a slam
- Bolt pattern is 3.5” wide x 2.63” H (center to center)
User questions & answers
Question: | Is this compatible for model |
Answer: | Barely, the holes are about 3 1/4 " apart and 5/8" wide. I'll try to post a pic... |
Question: | will this work with the lifetime 1529 basketball hoop |
Answer: | Yes you can, this rim already has all the holes. |
Question: | What mounting hardware is included with this rim? The C-shaped bracket that holds the pivot point is broken on ours |
Answer: | you will need cement drill bits, and cement screws, also called tapcon screws. they will hold very well if installed correctly. |
Question: | I need to make sure if it'll fit my backboard, can you give me more detailed info about the holes in the back of the rim |
Answer: | yes it did come with a net and the bolt pattern is 2 1/2 by 3 1/4 inches on center |
Product description
This heavy duty classically-styled rim is built to take a slam. The Slam-It Rim is made of 5/8" solid steel with double compression springs for spring-back action. Also includes a all-weather nylon net and hardware.
- 70g All-Weather Net
- 18" Rim Made of 5/8" Solid Steel
- 1/2" Steel Braces
- Net and hardware included
- Built to take a Slam!
User questions & answers
Question: | Can it be used as part of a pool hoop if properly mounted or will it rust quickly |
Answer: | I would say as long as you don't scratch any of the paint maybe put plastic washer so when you're tightening the bolts nothing scrapes the back. Good luck |
Question: | where can i find replacement bolts including the rubber washers? I really just need the rubber washers it came with |
Answer: | Replacement parts are available and can be ordered through our Customer Service Department. Our Customer Service Team can be reached at 800-225-3865 or by email at [email protected]. Customer Service hours are Monday-Friday, 7:00 am to 5:00 pm and Saturday, 9:00 am to 1:00 pm (MT). |
Question: | I have a lifetime 90165, product ID 1335308. Is this rim compatible |
Answer: | Yes it should be compatible. You will likely need to use the original hardware from the 90165. If you need additional assistance you can give our basketball team a call in customer service. They can be reached at 800-225-3865 or by email at [email protected]. Customer Service hours are Monday-Friday, 7:00 am to 5:00 pm and Saturday, 9:00 am to 1:00 pm (MT). |
Question: | what is the mounting pattern |
Answer: | Four holes but one is not quite lined up. I had to bore out one hole. I "heard" this is common with this rim.Still did not effect the rim. |
Product description
This in-ground basketball system from Lifetime Products features a 50" Steel-Framed Shatterproof backboard with an Action Grip height adjustment mechanism that adjusts from 7.5 to 10 feet high in 6-inch increments. It also includes a Slam-It Rim with an all-weather nylon net and a 3.5" diameter round steel pole. So bring the arena to your home with a residential basketball system from Lifetime Products.
Hone your jumpshot in your spare moments or perform a backyard dunking drill with the Lifetime 71799 in-ground basketball goal. Designed for permanent installations in cemented driveways, the 71799 includes such features as a Shatter Guard backboard, a spring-back Slam-It Rim, and an Action Grip pole mechanism for speedy height changes.
The goal's sturdiness stems from the cement-ready base, which is more rigid and takes up less space than portable basketball goals (it does require roughly 72 hours of cement drying time, however). The clear 50-inch Shatter Guard backboard, meanwhile, is made of Makrolon polycarbonate, which is virtually unbreakable and 30 times stronger than acrylic. As a result, broken backboards are a thing of the past, even from errant rocks and other non-basketball threats. In addition, the board offers a UV coating that prevents yellowing over time, a high-impact polyethylene frame, and screen-printed inks for fade-resistant color.
Lifetime knows that dunking and above-the-rim play are a huge part of modern basketball, which is why the 71799 also comes with both a height adjustment mechanism and a spring-back rim. The three-piece, 3.5-inch Action Grip pole includes counter-balance springs that make it easy to raise or lower the rim from 7-1/2 to 10 feet in 6-inch increments without requiring a broomstick, crank, or other tool. Thanks to the Action Grip technology, players of all ages and skill levels can enjoy the game on their own terms, while aspiring dunkers can gradually raise the level 6 inches at a time as their vertical improves. The orange Slam-It Rim, meanwhile, is designed specifically for players who like to throw down. The orange solid-steel rim features double-compression springs that give way during dunks to protect the player, then spring back once released. The rim is also supported by 1/2-inch braces, with welded-steel net hooks and an all-weather nylon net.
The 71799, which is protected by a powder-coated, weather-resistant finish, comes with a five-year warranty.
Amazon.com Basketball System Buying Guide
With the high-quality construction of many portable basketball systems, turning your driveway into a basketball court can be as simple as hooking up your garden hose. But while a portable system may ultimately be your best choice, there are reasons you may want to consider an in-ground or wall-mount system before you decide.
In-Ground Systems
In-ground systems are permanently cemented into the ground--either via a bolt mounting kit or directly into the ground--and are generally more rigid and take up less space than portables. In-ground systems often require that you hire a professional to complete the task, but when the cement dries you'll have a hoop that can take punishing dunks with ease.
Many in-ground systems are height-adjustable, include removable post features that let you take the system down for off-season storage, and feature heavy-duty break-away rims. You'll also want to research the adjustable mechanisms on the systems, as there are several types to choose from. Some feature a counter-balance spring that lets you perform easy, one-hand adjustments while others may feature a sturdy, pneumatic system.
Wall-Mount Systems
Wall-mount systems can be mounted to the side of a house, a tall retaining wall, or a garage. Generally sturdier than portables, wall-mounts have the added advantage of optimizing your existing ground space for the court, since you won't take any space up with the base or pole. Not all systems include the necessary hardware, so make certain you add a mounting kit to your list.
Portable Systems
Portable systems require minimal installation and offer ultimate convenience. These systems generally feature a base that can be filled with sand or water to stabilize them and include wheels for portability. Although they are not as sturdy as in-ground or wall-mounted hoops, portables are simple to set up and can often be folded for convenient storage.
Backboard Considerations
Regardless of which system you choose, you'll want to brush up on Backboards 101. Most residential systems feature backboards made of acrylic, fiberglass, graphite, or various other composite materials. While clear acrylic gives the professional look and feel of glass, it is not as rigid as fiberglass or graphite. Some systems may offer steel or aluminum backboards, which are virtually vandal resistant, but don't offer the true rebounding action.
The regulation size of an NBA backboard is 72 inches wide and 42 inches high. Most portable hoops are 42 or 44 inches wide and 36 inches tall. In-ground systems tend to be a bit larger, with 54-inch and 60-inch widths being the most popular. While rectangular shaped backboards provide more bank shot opportunities, they are generally more expensive than the streamlined fan-shaped board.
- In ground system with 50" steel framed shatter proof backboard; gives you the look and feel of the professional game!
- Action grip adjustment mechanism provides easy adjustment with only one hand
- Pole and steel frame are protected with a rust resitant powder coat finish to withstand the elements
- Features a heavy duty classically styled rim with all weather nylon net
- Backed by a 5-year manufacturer warranty
User questions & answers
Question: | Would this fit in my garage if lowered? Has anyone stored this in their garage |
Answer: | The base pole is too long for it to be stored in an upright position, even with the hoop lowered |
Question: | Does this item come with everything needed to install in ground pole? Trying to determine if I need Lifetime 3.5" ground sleeve |
Answer: | You only need the ground sleeve if you're intent is for the pole to be removable. The item comes with everything ready to install minus the concrete that you can buy at a hardware store. I didn't get the sleeve for my install since i wanted a permanent pole in the ground. |
Question: | How hard was it to install in ground without the sleeve? And be straight |
Answer: | The straightness is NOT very much affected by sleeve/no-sleeve. For example, you have to use the base section of the main pole as a visual guide to position the ground sleeve at a true vertical (so that's the same way you would true the installation sleevelessly). I installed mine With sleeve, in a heavy concrete footer. Despite a lot of effort, there is a minor lean, though, maybe 1° off true vertical, but it does not seem to come from any play in the sleeve-pole connection. It seems to come from a tiny bit of play in the mechanism that raises and lowers the backboard. A perfectionist might not love it, but after maybe 8 years of use, mine hasn't worsened any, and I've never walked out and thought "damn that leaning pole." It's too subtle to much notice, outside of a nitpicking frame of mind. |
Question: | how is it anchored and is it adjustable for plum after it's anchored |
Answer: | I purchased the in-ground sleeve. That gets cemented into the ground. I made sure that was plum and level when I set it in the concrete. The pole then gets inserted into it. I chose the sleeve because now if I ever moved I could take the system with me ( minus the sleeve cemented in the ground ). |
Product description
This heavy-duty mounting bracket is designed to mount a backboard and rim to a roof, eave, wall, or pole. It has a rust-resistant finish that holds up to the harshness of outdoor weather.
- Lifetime Universal Backboard Mounting Kit is designed to be mounted to a 3.5 inch pole, roof, or wall
- Rust-resistant finish holds up to the harshness of outdoor weather
- Hardware to secure to roof and walls is not included; 9.5" Backboard Offset
- Backboard and Rim Combo kits sold separately
- Compatible with most Lifetime backboards
- Sport type: Basketball
- Rust-resistant finish
User questions & answers
Question: | Will this mount work for a Spalding 54 inch backboard model |
Answer: | Hello,This mount was designed to be compatible with Lifetime backboards. Unfortunately we are unable to advise whether or not it will work with a Spalding model. We apologize for the inconvenience. |
Question: | We have an existing pole that has a 15" circumference, making it about 4.8 inches across. Is there any way to somehow rig this to fit? Help |
Answer: | If you receive all the material I did there wer different options and you should be able to clamp it to fit a pole |
Question: | The pictures show it mounted on a sloped roof without a rain gutter. Will it extend past a typical 4" rain gutter that hangs on the eve of the roof |
Answer: | Yes.....We have "Gutter Guards" (gutter system with tops) and backboard is mounted to extend beyond them. |
Question: | How do you attach the backboard (Lifetime 73729) to the bracket brace angle pieces on the top of the bracket |
Answer: | good question!! i tried & tired again until i finally hired a professional handyman. he cost more than the backboard & extesion bracket together. |
Product features
LIFETIME 9594 Universal Mounting Kit, Silver
Get a game going by mounting your basketball hoop anywhere around your home. Whether it’s your front yard, driveway, or backyard, you can enjoy a game of basketball with your family and friends. The Lifetime Universal Backboard Mounting Kit is designed to be mounted to a 3.5 inch pole, roof, or wall. This heavy-duty mounting kit is rust and weather resistant to hold up against the elements and provide years of use.
Product description
Good quality:
These plastic hole plugs are made of durable plastic and built in multiple ribs for easy installation and secure fixation.
Various sizes:
These round plastic plugs have different diameters including 1/2 inches, 3/4 inch, 1 inch, 1-1/4 inch, 1-1/2 inch, 2 inches; The multi sizes allow for wider application, good for meeting your different needs.
Useful accessories:
These plastic plugs inserted into the table and chair legs, the floor will get fewer scratches and reduce the noises; They are suitable for plugging on the furniture legs holes or tube enclosures on trailers, racks, shop fittings, etc..
Specifications:
Color: black
Shape: round
Materials: plastic
Round plug diameters: 1/2 inches, 3/4 inch, 1 inch, 1-1/4 inch, 1-1/2 inch, 2 inches
Compatible outside tube diameter: 1/2 inches, 3/4 inch, 1 inch, 1-1/4 inch, 1-1/2 inch, 2 inches (choosing the sizes of these plastic plugs is determined by the outside diameter of something that you want to insert)
Package includes:
10 x Round plastic plug with an outside diameter of 1/2 inch
10 x Round plastic plug with an outside diameter of 3/4 inch
10 x Round plastic plug with an outside diameter of 1 inch
10 x Round plastic plug with an outside diameter of 1-1/4 inch
10 x Round plastic plug with an outside diameter of 1-1/2 inch
10 x Round plastic plug with an outside diameter of 2 inch
User questions & answers
Question: | i need a plug for a 2 inch hole. Is there a plug in this that will fit snugly in a 2 inch round hole |
Answer: | 12.3 9.125 2.25 all in inches weighs just under a pound |
Question: | We lost the cover for the hole in our basketball hoop base would these work |
Answer: | NO this model does not have a motor |
Question: | Can I order just the 1 1/4" size in larger quantities |
Answer: | Hello- The quality is terrific. The parts fit together and stay together quite well but are intended to be made into lots of different things. Assembled and disassembled many, many times. Engino age rates these at 6-12. They also come with a tool to take apart smaller pieces. Also complete compatible with other Engino kits. |
Question: | Will any of the size fit over a 1” conduit |
Answer: | yes we have red black white pink make the order and send us note what color you like |
Product description
Work on your range with the Spalding Slam Jam Basketball rim. Built for the outdoor game, this steel rim has a powder coat to protect it from the elements. It's spring-loaded for a smooth break at the front. Designed for outdoor play with an all-weather net and is backed by Spalding’s 1 year warranty.
- 2 7/8 inches x 2 1/2 inches mounting bracket
- Heavy-duty steel rim
- Ultra-smooth spring breakaway action
- Includes all-weather net
- Backed by Spalding's Warranty
User questions & answers
Question: | Can I mount this to wall |
Answer: | It's not really designed for mounting like that, it goes with a backboard. You could mount it to a wall, but you'd have to use lag bolts, and doing lady ups would be difficult. |
Question: | What size nut is that on the spring |
Answer: | 3/8"-16 |
Question: | I am trying to replace a spring hoop bolted 4 inches apart on an acrylic back board. Is this hoop a good match |
Answer: | Yes. I replaced my original hoop with this one . I have a back board for my swimming pool. |
Question: | What is the diameter of the hoop |
Answer: | 18 inches |
- 44" x 30" Shatterproof Fusion Back Board with Black Slam-It Rim and all-weather net. The surface thickness is 0.09 inches (2.5 mm)
- Can be mounted on a wall, roof, eave, or pole using a universal mounting bracket; Works best with the Lifetime Universal Mounting Kit (sold separately)
- Mounting Brackets Sold Separately
- Ideal for Replacing an Existing Board or Roof Mount
User questions & answers
Question: | What is the vertical distance from the top rim mounting holes to the Y-bracket mounting holes? Thanks |
Answer: | The garage roof...I can send a pic...or I will just make my own bracket I guess |
Question: | Will occasional -10 degrees effect this backboard |
Answer: | I am not sure as we mounted it to an existing pole & had to do some extra work to make it fit. |
Question: | Do I need to buy a separate mounting kit if I plan on mounting the goal/backboard on a wall |
Answer: | Hello,We do sell mounting kits that will work to attach this to a 3.5" pole. They are models: 1044 & 9594. |
Question: | what are the dimensions for rim to backboard mounting holes |
Answer: | The Lifetime universal mount kit is clearly designed to fit the exact location of the two vertical supports on the back of the backboard, and fitting that was tough enough. So I doubt that another 'universal' kit would match the Lifetime design without some tinkering. |
Product features
Lifetime 44 Inch Shatterproof Backboard and Rim Combo Kit
Lifetime's backboard and rim combo sets are a great option for any home. The backboard is polyethylene framed with a polycarbonate playing surface, and can be mounted to a roof, existing pole, or wall with the Lifetime Universal Mounting Kit (sold separately). Bring the game to your home and play the way you want!
- Shatterproof Fusion Backboard
- All-Weather Net
- Slam-It Rim
- Ideal for Replacing an Existing Board or Roof Mount
- Mounting Brackets Sold Separately
- Fade-Resistant Graphics
- Date First Available :
- Manufacturer :
- ASIN :
User questions & answers
Question: | At the lowest setting what is the total height from the top of the backboard to the ground |
Answer: | The base of the goal is 3 feet long by 2 1/2 feet wide. |
Question: | How large is the box |
Answer: | It Does Not Come With a Ball |
Question: | What size basketball can fit in this hoop |
Answer: | This is an excellent Pool basketball hoop. Just try to keep it out of the sun and rain when you are not using it (off season) |
Question: | can a 10 year old use this(5.5ft |
Answer: | My boys are young and they hang on it all day. Very sturdy. |
Product description
The Ultra Sporting Goods Basketball Nets are of the highest-quality in the market. Whether you’re replacing an indoor basketball rim or the basketball rim in your backyard, our basketball nets are MADE TO LAST! Our Satisfaction Guarantee makes your purchase 100% RISK-FREE!
FITS ALL STANDARD SIZED BASKETBALL RIMS
Our basketball nets measure in at 21 inches in length and 12 loops to fit most standard sized basketball rims. These include the basketball rims at your local gym, the park, indoor basketball courts, or even the one you have in your backyard!
MADE FROM THE HIGHEST QUALITY
Our nets are made from thick, tough polyester material that makes it the perfect net for either indoor or outdoor rims. Our nets are heavy-duty and resist to any type of pulling, stretching and tension. So go ahead and hang from the net all you’d like! Our nets are also all-weather proof meaning it can withstand any type of weather conditions such as heat, rain, snow, and high humidity. This makes it a great option for outdoor basketball rims.
ANTI-WHIP NET
Don’t you hate it when you make a basket only to have the net whip up and wrap itself around the rim? That’s called net whip. Our nets are dense enough that it prevents that whipping from happening but flexible and light enough to still give you that sweet swish sound from the perfect shot. No more fishing the net out of the rim!
EASY TO INSTALL
The 12 loop system that most basketball rims feature make it a breeze to install new nets. Just grab a ladder and install your new nets in a matter of minutes! And you’ll be putting up shots in no time!
SATISFACTION GUARANTEED
It is our duty to provide our customers with the highest quality products. Therefore, if you are not 100% completely satisfied with your purchase, simply request a refund within Amazon’s refund window and we’ll give you you
- 🏀 STANDARD SIZE: Our basketball nets feature 12 loops and measure 21 inches in total length to fit all standard-sized basketball rims.
- 🏀 DURABLE AND MADE TO LAST: Made from the highest-quality and thickest polyester fibers, our nets are ideal for both indoor or outdoor basketball rims. Our nets are made to withstand any type of weather conditions and the constant pulling and hanging that comes with regular gameplay.
- 🏀 ANTI-WHIP NET: Our anti-whip technology helps prevent our nets from getting tangled with the rim whenever the ball goes in the hoop, all while maintaining its flexibility to provide that sweet swish sound of that perfect shot!
- 🏀 EASY TO INSTALL: The 12 loops make it extremely easy to install and replace on any standard sized basketball rim. It only takes a few minutes to install!
- 🏀 SATISFACTION GUARANTEE: If you’re not 100% satisfied with the high quality of our nets, simply request a refund and we’ll give you your money back, absolutely no questions asked! Purchase our nets 100% risk-free!
User questions & answers
Question: | What are the measurements of the square to screw into the backboard, and where are the holes located |
Answer: | No - this is a pretty heavy duty outdoor mounted rim. |
Question: | Does this come with the nails |
Answer: | The product being offered is the net itself, not the rim assembly. |
Question: | Will a size 7 ball (29.5 in) fit through the net easily |
Answer: | 1 net |
Question: | Will this fit a 29.5 in/ size 7 ball easily |
Answer: | Not sure but great quality. Looks awesome |
Latest Reviews
View all
Amazing Grass Wheatgrasses
- Updated: 09.01.2023
- Read reviews

Go Pro Sd Card
- Updated: 08.07.2023
- Read reviews

Champion Bed Frames
- Updated: 25.04.2023
- Read reviews

Instant Dna Tests
- Updated: 08.07.2023
- Read reviews

Sonos Soundbars
- Updated: 09.02.2023
- Read reviews