14 best snowmobile trailer accessories

Product description

Grips protect trailer decking from rot due to stud damage and help prevent tracks from spinning on icy trailers. A grip also prevents the track from freezing to your trailer deck. HDPE plastic makes these grips extremely durable, and the provided flathead screws mount directly through the grip flange.

• Protect trailer decking from rot due to stud damage
• Prevent tracks from spinning on icy trailers
• HDPE plastic makes these grips extremely durable
• Provided flathead screws mount directly through the grip flange
• Fit type: Universal Fit

User questions & answers

Question:	How many come in a box
Answer:	It does for me. My T zone gets a little shiny but it never really bothered me. I was mainly concerned about the redness on my face, but I did notice that this actually helps with my T-Zone. I am lucky enough that I don't get too oily so I can't say how well it works on more oily skin. Setting powder works great for T-Zones, that's what I use when the weather gets warmer.
Question:	Get me RMA number Jim Walker
Answer:	I'm not sure it would reduce them. It makes a great base to apply your makeup on. It makes your skin feel super soft. And helps to even out any extra red tones in the skin.
Question:	the picture displayed is as grips. Your descripton descripes this as being mats. Which isc correct? I need traction grips
Answer:	The green color completely goes away once you rub it into your skin. No foundation needed if you don't want it.
Question:	Do I install these every 10 inches from very bottom to the top of ramp? If so for a 6 foot ramp I need more than 6 right
Answer:	Not a fake! Love this stuff! It will not make red totally disappear but wow what an improvement and without being heavy, gooey and noticeable. I have Rosacea and have acne since I was 11, now 57 and this does not clog pores and make me break out!
Question:	Does this product help with oily skin like the other Smashbox primers say they do
Answer:	I had used this product for several years. . Unfortunately, my last 2 purchases of this were not acceptable. Instead of remaining serum-like and pump useable, the product became thick after short use and I had to extract it by opening the container and taking it off the pump stem. The product was good, the quality control lacking. Or, maybe I was sold old merchandise. I have since switch to other primers.
Question:	The pores on my nose appear much larger as I age. Does this help to reduce the appearance of large pores
Answer:	It does a fairly good job. It gives your face an air brushed look.
Question:	Since it's green, is it necessary to apply a foundation on top
Answer:	Apply about a dime size amount lightly over the face, wait 1-2 minutes, then apply makeup. Next time I would recommend getting your foundation primer in the pump bottle because with 1 pump, you'll have just the right amount.
Question:	Um, was going to purchase this and it looks like a fake. Hard to tell from picture, but bottle/ logo just doesn't look quite right. Feedback
Answer:	I've been using this for years and have sensitive skin and have had no problems. Here's the ingredients: Cyclopentasiloxane, Dimethicone Crosspolymer, Dimethicone, Silica, Magnesium Silicate, Ascorbic Acid (Vitamin C), Tocopherol (Vitamin E), Calcium Pantothenate (Vitamin B5), Aloe Barbadensis Leaf Extract, Chamomilla Recutita (Matricaria) Flower Extract, Glycyrrhiza Glabra (Licorice) Root Extract
Question:	Does this primer hold on to the foundation. Does it stay on all day
Answer:	I didn't see a drastic reduction in my oily areas (tzone) using this. I would recommend first using an oil free liquid foundation like Neutrogena or Clinique has one also. Then set your foundation with a compact powder and bring it with you during the day to spot treat.
Question:	how well does it hide pores
Answer:	Iron oxides, silica, silylate silica, titanium, mica & other ingredients can't spell, Elf website has list of all ingredients.
Question:	how do you use the prime time
Answer:	I'm not 100% sure if it's the primer or the mist and set spray but i can tell u that it makes a smooth canvas to apply ur makeup...was 102° today n California where I'm from and my makeup was ok...i really love the whole ELF line...although I do use Almay foundation...
Question:	Ingredients
Answer:	If you have red colour or red flushing on your skin green is the colour for you. Think of an artist colour wheel green is opposite red and if you are prone to yellowing then a purple or blue is for you. Hope this helps.

Product description

Edge Glides provide a smooth transition for your snowmobile from the ground to trailer or ramp. Friction-reducing glide technology, made of high-impact plastic. Guaranteed not to crack, chip, break, or warp. Designed for easy installation and use. Each Edge Glide measures 5-7/8" x 8-3/4". Made in the USA. Lifetime warranty.Comes without hinges

• Double set of Edge Glides for tile trailers (includes 4 pieces) without hinges
• Designed to accommodate all skis
• ski stances and ATV/UTV tires
• High impact plastic (HDPE construction)
• Made in the USA/Lifetime warranty

User questions & answers

Question:	When this say 4 pieces, is it 4 pieces as in good for 2 sleds, or 2 plastics and 2 metal hasps? Thanks
Answer:	It's not really a traxmat, they are individual 15" by 1 1/2" cleats. There are six to a box.
Question:	Has anyone riveted these on? Seems like it would be a good way to attach them
Answer:	These mats are junk. All of them split or cracked right off around the screws. After seeing them in person they are Over priced as well. Junk!
Question:	It this for the inclosed trailer or a tilt trailer
Answer:	They are grips not a mat. They are individual pieces. Works great on my tilt trailer for snowmobiles.
Question:	What are the dimensions
Answer:	I did, I ordered more and spaced them the same from the foot of the ramp and into the trailer.

Product description

Stop damage to your trailer decking or ramp caused by studded tracks. The TraxMat provides excellent traction when loading and unloading your snowmobile with a unique bottom groove design that allows moisture to dis and dry out, preventing trailer deck rot. Dimensions: 54" length x 18" width x 3/8" thick.

• Provides excellent traction and break control when loading your snowmobile
• Superior airflow prevents against deck rot
• Great for studs!
• Dimensions: 54" length x 18" width x 3/8" thick

User questions & answers

Question:	Need a mat to place under travel trailers wheels to keep from sinking in soft dirt. Would this work laid out under the wheels not attached to anything
Answer:	As others have stated.. it is 4 guides = 4 "plastics". Enough for 2 sleds. I have had mine on for a few quite awhile now and they are holding up great! I use the trailer year round as it doubles as my Home Cheapo / bLowes trailer as well as for my Quad!
Question:	If you were to stand mat on its end would it stand straight up or bend?? Looking to use for a make shift old dog ramp by screwing to stairs. TY
Answer:	Should work just fine! Great Idea - Just get the correct length rivets. If you have an aluminum trailer then the supplied screws should work fine! If you have a galvanized trailer then I would rivet them on. I wound up using stainless machine screws Also note - When drilling the holes be careful not to let the drill bit go too deep! You might wind up chewing up some of your wiring! (I didn't because I use stop collars on my drill bits)
Question:	How thick is the mat
Answer:	It’s for a tilt trailer
Question:	Does the Mat come with adhesive
Answer:	5-7/8” x 8-3/4”

Product description

Ratchet design with 6 locking positions, fits 1-7/8", 2" and 2-5/16" couplers.

• DIMENSIONS: 9” x 9” x 3”
• BUILT TO LAST: The REESE Towpower Universal Coupler lock is a premium lock constructed with an aluminum body and heavy-duty steel lock bar.
• UNIVERSAL FIT: Ratchet design is adjustable with 11 locking positions and fits 1-⅞”, 2”, and 2-5/16” couplers.
• DETERS THEFT: Bright, deterrent yellow color is durable, highly visible, and an essential accessory to all types of trailers.
• SECURE PROTECTION: Easy-to-install lock resists picking, prying and drill outs. Guards against truck or trailer towaway theft in storage.

User questions & answers

Question:	Does any of hitch locks use key # LB
Answer:	Mine is a 2012 Ram Laramie and it fits, so it should definitely fit yours. The other thing is the cord that plugs into the trailer hookup was too short, so I had to buy an extension; so make sure to do that right away
Question:	How do I use the key to unlock the reese towpower lock
Answer:	Hello,Thank you for your interest in our product - This hitch cover will work with any 2" receiver and it plugs in to the 4-pin connector. Some vehicles have a 7-pin connector but you can purchase an adapter to make it fit. If your Dodge Ram comes with OEM led's this will not work because it will give you error messages on the dash board. Hope this information helps!
Question:	I have lost my keys - is a universal key available
Answer:	Wiring harness was too short to reach my plug. I did not measure, but it was for a 2020 Ram 2500
Question:	How secure is this? I just saw this video asn was astounded: https://www.youtube.com/watch?v=-G_zz80h_Tc What else can you do to be safe
Answer:	none in the package fits 4 wire flat plug

Product features

Reese Towpower — Strong Security Deters Thieves From Stealing Your Equipment

This premium lock is constructed with an aluminum body and heavy-duty steel lock bar. Adjustable ratchet design has 11 locking positions and fits 1-⅞”, 2”, and 2-5/16” couplers.

Guards Against Truck or Trailer Theft

Use of a bright, deterrent yellow color offers durable, highly visible protection for all types of trailers. Advanced lock resists picking, prying and drill outs, making this an essential safeguard.

Universal Theft-Deterrent Design

The Reese Towpower Universal Coupler Lock is built strong and designed to fit 1-⅞”, 2”, and 2-5/16”couplers. Its bright, highly visible yellow color guards against truck and trailer theft while its premium lock resists picking, prying and drill outs giving you peace of mind.

Reese

Founded in 1952, Reese has become a household name in the heavy-duty towing industry and a market leader in automotive and recreational product solutions. With proven designs that exceed the industry standards, we are the brand of choice when performance is the expectation. Reese caters to the towing needs of everyone from recreation enthusiasts to heavy-duty agriculture users by manufacturing the largest selection of receiver hitches; ball mounts and hitch balls; trailer and hitch locks; couplers, jacks and winches; and electrical and lighting components. For us, performance, safety, and durability are always front and center. They’re the reason why people ask for Reese by name.

Product description

Stop damage to your trailer decking or ramp caused by studded tracks. The TraxMat provides excellent traction when loading and unloading your snowmobile with a unique bottom groove design that allows moisture to dissipate and dry out, preventing trailer deck rot. Dimensions: 72" length x 18" width x 3/8" thick.

• Provides excellent traction and break control when loading your snowmobile
• Superior airflow prevents against deck rot
• Great for studs!
• Dimensions: 72" length x 18" width x 3/8" thick
• Includes one traction mat

User questions & answers

Question:	What type of screws did you use
Answer:	The mat is very soft and flexible. Don't believe it would be good for hits application. If your just looking at keeping your tires clean, then ok. If your looking for something to keep the tires from sinking, I think I'd look for something harder.
Question:	Does it come with one or two mats
Answer:	Very flexible, not good for a ramp by itself
Question:	is the mat rubber or plastic
Answer:	Well, the mat is about 1/8th inch. This of course does not include the ridges.
Question:	How long is this mat, 54" or
Answer:	The Mat does not come with adhesive but it does come with screws I believe like 6 per side the mat does hold well with the screws, though over time some will surely need to be replaced due to carbides or studs hitting them, I think a generic adhesive or marine adhesive would work but it would make it almost impossible to remove cleanly

Product description

Caliber's Edge Glide V2. 0 Kit is an innovative accessory that provides smooth Edge transition from the ground to your trailer or ramp. The glide's new 24" increased size allows more versatility and the integrated traction knobs provide a grip for tires and foot traffic. New integrated cut lines provide clean edges when trimming to fit your trailer or ramp. Assembly time is reduced by eliminating stainless hinge with the new hinge and pin design. Incorporates Caliber's proven friction-reducing glide technology.

• Four piece Edge Glide V2 kit
• Dimensions: 96"; 24" W x 9" L
• Traction knobs provide grip for tires and foot traffic
• Hinge and pin design eliminates stainless hinge and reduces assembly time
• Includes a Caliber lifetime
• Fit type: Universal Fit

User questions & answers

Question:	Is this for a inclosed trailer
Answer:	Washer head or so called cap head screws 1 inch
Question:	Can these be cut to make four 12" glides
Answer:	comes with one mat
Question:	Can you get these in one piece 94 1/2 inches long
Answer:	I would say it's more of a plastic material. Studs do leave minor holes in it. But otherwise it works great. I would recommend. But a note is install with warmer weather or heated area way more flexible and wont ripple up while installing. Hope this helps.
Question:	Can you buy just one section
Answer:	72

Product description

Quick & easy to install, strong and durable, lightwieght composite material.

Eliminates long reaches to secure your sled.

Adjusts to fit all types of skis; rubber mounting protects skis.

Deck hook does not obstruct loading or unloading and is adaptable for all types of trailers.

Theft deterrent with owners own padlock.

Super Clamp II comes with one screw mount deck hook included.

Sold each.

• Quick & easy to install, strong and durable, lightwieght composite material
• Eliminates long reaches to secure your sled
• Adjusts to fit all types of skis; rubber mounting protects skis
• Deck hook does not obstruct loading or unloading and is adaptable for all types of trailers
• Theft deterrent with owners own padlock

User questions & answers

Question:	Does the work on a polaris with plastic oem skis? is $23.50 a good price on the inch longer bolt
Answer:	Either inclosed or open
Question:	How long is the D clamp screw that comes with the super clamp? Longer then 3 inches
Answer:	Yes. They can be cut to various sizes and work great.
Question:	Is this for 1snowmobile or
Answer:	You can attach multiple together
Question:	Does this product come with the material to fasten the clamp to my trailer
Answer:	They offer various sizes and they can be cut to length for a custom application

Product description

CALIBER TRAILER LOADING & UNLOADING SHOCK SYSTEM A sensible way to hold your snowmobile trailer in the loading/unloading \"tilt\" position. Comes with high strength steel ends and a new rust proof shaft. Easy single person loading/unloading operation. Operates smoothly in extreme temperatures. Hardware and instructions included. New steel ends. Nitride coated shaft. For more information on this product check out this video. Image is for referent only. Shock Only. Trailer and trailer leg not included.

• Caliber Trailer Lift Metal Ends (image is for reference only)
• High strength steel ends
• New rust proof shock shaft
• Fit type: Vehicle Specific

User questions & answers

Question:	There are three standard, critical pieces of information missing. Can someone provide the length closed, length open and capacity
Answer:	I’m unfamiliarity with the Polaris skis. I would measure the distance from where the clamp lays on top of your skis to the trailer deck (which includes the height of the skags) Plus the depth of your trailer bed, to where you will secure the clamp’s bolt underneath. If you can find s bolt long enough, and can get at the underneath your trailer to install it, yes. I’d say $23.50 is a fine price. The Clamp seems to be a good product. I had problems because I run on Snowtrackers, and my trailer deck is a few inches thick.
Question:	What is the weight limit on theses
Answer:	It comes with a 4 inch hook, but there is a 5 inch hook also available from the manufacture. They also have other mounting systems too like T hooks if you have a channel in your floor already. They also have a Super Trac which is a rail with a movable hook.
Question:	Can they be doubled up
Answer:	This is for 1 snowmobile. If you have 2 snowmobiles you would need 2 of them, plus the rear ones to hold the back end of the sled down.
Question:	Does this item come with the brackets
Answer:	Yes it does. It has a screw In hook that screws into your trailer.it is 0.5" x 13 thread that would thread into your trailer.

Product description

Don't wreck your trailer anymore. Protect it with the track mat from Raider. This mat will protect your trailer from studded tracks and moisture. This is a must have for everyone snowmobiler.

• Provides EXCELLENT TRACTION when loading and unloading your snowmobile
• PROTECTS your trailer deck or ramp from damage caused by studded tracks
• UNIQUE BOTTOM GROOVE DESIGN allows moisture to dissipate and dry out PREVENTING "deck rot" commonly caused by other track mats
• STAINLESS STEAL mounting hardware INCLUDED
• EXTRA WIDE: 18 inches x 54 inches Mat gives OPTIMUM PROTECTION

User questions & answers

Question:	Can I use on my garage floor while pulling sleds in and out to prevent gauging on the cement
Answer:	All measurements are in package
Question:	How thick is this stuff? Wondering if i can use it on my sled deck ramp, which retracts into itself
Answer:	I’m not sure the weight limit but I have it on my snowmobile trailer, which is a clamshell type, and it holds it down with 2 snowmobiles on it which is roughly 800lbs.
Question:	Will these work for sleds w/out studs or is this type of mat specifically for studded snowmobiles
Answer:	They could be doubled up but I have one on my two place snowmobile trailer with a clamshell and it’ll hold it down with both snowmobiles on it no problem
Question:	is there a product to hold trailer tilted
Answer:	yes it comes with brackets and self tapping screws to bolt them on, so everything you need and it's a 20 minute job, but I highly suggest going on you tube to watch a video first.

Product description

Protects the resale value of your snowmobile, ATVs and motorcycles by deflecting corrosive salt & road spray. 25. 5" high and fits trailers from 95" to 102" wide without modification. Removes in seconds with included Quick-Detach kit. Quick-Detach works on V-Front drive-on, drive-off trailers. Will not shatter, crack, split or dent and is impervious to destructive road spray and foreign chemicals or fluids. Unique molded spray channels enhance aerodynamics and help to direct road spray to the sides of the trailer and away from snowmobiles, ATV's, motorcycles. Molded of HDPE plastic, providing ultra-rigid strength and the same durability proven in the truck bed liner industry. Shield is not affected by extreme cold temperatures.

• 25. 5" high and fits trailers from 95" to 102" wide without modification
• Removes in seconds with included Quick-Detach kit; Quick-Detach works on V-Front drive-on, drive-off trailers
• Will not shatter, crack, split or dent and is impervious to destructive road spray and foreign chemicals or fluids
• Unique molded spray channels enhance aerodynamics and help to direct road spray to the sides of the trailer and away from snowmobiles, ATV's, motorcycles
• Molded of HDPE plastic, providing ultra-rigid strength and the same durability proven in the truck bed liner industry; Shield is not affected by extreme cold temperatures

User questions & answers

Question:	Does the shield make it hard to tie the sleds down in front
Answer:	Keep in mind they are only as long as the track. Also if you are under power you will need to fasten then down to keep from throwing them out from under the sled.
Question:	Will this work on a 4x8 Triton tilt single place trailer
Answer:	Approximately 1/2”
Question:	Will this work on a karavan 3 place v-nose trailer? With the quick disconnect feature too
Answer:	Works with or without studs great product.
Question:	Can the shield be easily removed for other use,is it screwed down to the trailer
Answer:	Most good trailers have lift assist shocks under the bed to hold them in the tilted position. They attache to the frame and bed. They do break or wear out after years of use. You would have to look at the model of the trailer and look on-line for the correct parts to replace it.

Product description

The Caliber 23060 Trax Grabber features an innovative lug pattern that provides a smooth interlocking grip for your track. The strategic lug placement engages 2. 5", 2. 86" and 3. 0" pitch tracks. The 16" width accommodates all track widths without overhang. Constructed of high-impact plastic (TPO), not to crack, chip, break or wear out.

• Helps provide effortless loading of your snowmobiles
• Innovative lug patern provides smooth interlocking Grip for your track
• Strategic lug placement engages 2. 5 , 2. 86 and 3. 0 pitch tracks
• Great Low Profile design makes for safe walking
• High-impact plastic (TPO), not to crack, chip, break or wear out

User questions & answers

Question:	Is buying one double set enough for a 137" track
Answer:	That has not been a problem for me. I've seen them installed with a hinge on the trailer bed also
Question:	Description only says package dimensions. How big is each section? how many sections in a pack
Answer:	I would say yes it would work, but you would have to cut some stock off of both side piece, then the center piece would cover up the cuts.
Question:	what size are they
Answer:	No. this just fit, my 2 up Karavan trailer.
Question:	How well do these hold up if run over with the carbides, both forward and reverse
Answer:	It is attached at the corner of the trailer and support bars with removable pins, so yes it can be taken off and reinstalled easily. I put 2 screws into the deck for extra support to give it stiffness.

Product description

The powerful REESE Towpower Trailer Jack fits tongues 3” to 5” and helps effectively raise and lower trailers with a capacity up to 1,000 lbs. Operating with a 1:1 gear ratio, the side-winding handle with a wire-grip knob allows for fast and smooth usage while a heavy-duty swivel mechanism and pull-pin release make it easy to access the device when you need it, and store it away when you don’t. For added mobility, this jack includes 6” wheel that glides easily and lowers the friction to help you move a trailer into position with minimal effort.

• Features 1000 pound capacity
• Side winding handle with 1:1 gear ratio provides fast operation
• Heavy duty swivel mechanism for easy use
• 6 inch wheel to move your trailer into position for easy hook-up
• Fits tongues 3 inches to 5 inches

User questions & answers

Question:	If "Overall height 23 -1/5" Retracted Length 12-3/4"" is correct, then wouldn't the max lift be 10 3/4"? That would not be enough lift my use
Answer:	I haven't done any measurements on my trailer lift but your figures seem accurate from my use of said lift.
Question:	drill press
Answer:	No, the bracket that comes with it is plenty stout enough to attach to the tongue.
Question:	does it come with installation hardware like brackets and screws
Answer:	Yes, it does. It comes with long bolts and brackets so you are able to "sandwich" the frame of your trailer between the brackets and the unit.
Question:	what is the overall length when retracted and when open to maximum
Answer:	Overall height 23 -1/5" Retracted Length 12-3/4" Max Lift 22-7/10"

Product features

REESE Towpower - High Capacity for Easy Up and Down

The REESE Towpower Trailer Jack fits tongues 3” to 5” and supports a wide variety of vehicles with a capacity up to 1,000 lbs. Operating with a 1:1 gear ratio, the side-winding handle with a wire-grip knob encourages fast, smooth usage.

Swivel-Design for Easy Stowing

Heavy-duty swivel mechanism is designed to help you safely and easily stow away the jack in between uses. Use the pull-pin release to quickly access the jack when you need it, or store it away when you don’t.

1,000 Lb. Capacity

The REESE Towpower Trailer Jacks fits tongues 3” to 5” and helps easily raise and lower trailers with a capacity up to 1,000 lbs.

Swivel Access

Heavy-duty swivel mechanism with a pull-pin release makes it easy to access the jack when you need it, and store it away when you don’t.

Operates In Seconds

Side winding handle with a wire-grip knob operates with a 1:1 gear ratio for fast, smooth usage. Sturdy 6” wheel helps to easily move your trailer into position.

REESE

Founded in 1952, REESE has become a household name in the heavy-duty towing industry and a market leader in automotive and recreational product solutions. With proven designs that exceed the industry standards, we are the brand of choice when performance is the expectation. REESE caters to the towing needs of everyone from recreation enthusiasts to heavy-duty agriculture users by manufacturing the largest selection of receiver hitches; ball mounts and hitch balls; trailer and hitch locks; couplers, jacks and winches; and electrical and lighting components. For us, performance, safety, and durability are always front and center. They’re the reason why people ask for REESE by name.

Product description

"Nilight’s New Submersible Square LED Trailer Light Kit Combination of stop turn tail, side marker, side reflector, rear reflector, license plate light for your safe driving.



Specifications

Operating voltage: 12VDC

Amperage Draw: 0.2A-0.4A

Waterproof Rate: IP68

Certificate: DOT compliant

Square Light dimension: 5”x 4.7”x 2.9""

Amber clearance light dimension: 2.3"" x 3.9""

Square light mounting distance: 2""

Amber clearance light mounting distance: 3.3""

Wiring harness kit: 2 sets 4 pin trailer wiring harness, 21. 65 feet plus 3. 93 feet



Package Includes:

2 x square trailer lights, 2x amber clearance light, 2 x trailer harness kit, 1 x license plate bracket,4x reflective sticker, 1 x hardware pack."

• New Design: Features separated running light display and stop turn light display by using halo glow ring, add on unique outlook and differences. Also each light use more led chips than the classic one, giving more brightness and reliable visibility for safety.100% DOT compliant.
• 7 Full Functions: Combined full functions of stop turn tail light, side marker, side reflector, rear reflector, and license plate light. Fit most 12V DC vehicles within 80 inch, like trailers, boats, trucks, RV, Marine, Pickups, camper, tractors, bus, lorry, van, caravan, snowmobile
• IP68 Submersible: LEDs and circuit board inside are fully waterproof sealed to work under water without electric short risk. Light housing also features water drainage for added protection.
• All-in-one Kit: Comes with everything for your straight-forward installation, include square trailer lights, amber clearance light, license plate bracket, trailer wiring harness, reflective stickers, and different types of mounting hardware for handy use
• Easy Installation: Light mounting: stud-mounted design, light with license light on driver side, the other on passenger side. Wire connection: color coded wires, just color to color and white wire with ring terminals can be grounded at its own mounting stud or to vehicle frame.

Product features

Nilight’s Submersible Square LED Trailer Light Kit

Adopt a new feature of the halo glow ring. Separate running light and stop turn light displaying, add one more LEDs, giving more brightness and reliable visibility for safety. Still combine 7 full functions of stop turn tail light, side marker, side reflector, rear reflector, license plate light.

Quality LEDs

Quality and more LEDs, and add on new design halo glow ring for better brightness and safety

Special Design

Stud mounting for easy, firm and durable installation. Grooves design for perfect surface mounting.

Built-in IP68 Waterproof

Inside electronics and circuit board are epoxy encased and fully sonically sealed, entirely submersible, trailer light housing also features water drainage.

Convenient Ground

White wires are added ring terminals for convenient ground at the mounting stud, no need to drill more hole for it.

Night Time Tail Light

Night Time Stop Turn Light

Daytime Stop Turn Light

Clearance Light

Product description

An innovative accessory to help load your snowmobile or ATV. Includes grips for ATV tires, and glides for snowmobile carbide wear bars. Headache free loading and unloading!

• Grips for ATV tires
• Glides for snowmobile carbide wear bars
• Headache free loading and unloading
• Made from quality materials
• Fit Type: Universal Fit

User questions & answers

Question:	how many actual grips are in the kit
Answer:	Hi, My sled has a 137" track. There are 2 sections in the pack and the whole track is on them. Great product...I just drive my sleds on slowly and in control with no slipping.
Question:	Do these come with hardware? Or how do they attach to a wood tilt trailer
Answer:	Don't order them they will send you the wrong part and it is on the customer to return them and it is expensive
Question:	Will these grip glides work with dual carbides
Answer:	They do well. I have the “step” type that came on my floe trailer and these actually hold up as well or better. They don’t stick up as high, but my studs still don’t touch the deck. I go back and forth on them.