9 best wakeboard boats

• 2.5" Clamp with neoprene liners to accommdoate down to 2.375", 2.25", and 2" round tubing.
• Infinitely adjustable with just one bolt. 360 degree rotation to ensure you can accommodate ALL angles of tubing
• Constructed of 6061 T-6 Billet aluminum with a high polished, "chrome-like" finish
• Does not use a small feeble pin for indexed adjustments like other holders
• Thumbscrew included to ensure a tight grip on your flag pole

User questions & answers

Question:	Is there anyway to accommodate a 1 7/8 wakeboard tower pole
Answer:	You can combine liners to accommodate smaller tubing sizes. You are more than welcome to email us, and we can send you a link to a video showing how to accommodate smaller tubing size.
Question:	do u sell the actual flag poles shown in the pictures
Answer:	Yes we do, but unfortunately we don't sell them on the Amazon platform, just our website. You can find them under the parts page.
Question:	Will this fit 2” tubing, 2 3/8” outside diameter
Answer:	The flag holder has a standard 2.5" clamp and we provide liners to accommodate down to 2 1/4" and 2" tubing. If you have 2 3/8" tubing, please make that note on your order and we can add an additional liner to accommodate 2 3/8" tubing.
Question:	Do they come in black
Answer:	This item is only available in a polished finish. However, it can be painted if you would like. We recommend taping off the connection for rotation before painting.

Product features

Not sure of your tubing size?

To determine your tubing size for the correct clamp fitment, you will need to measure the circumference (all the way around) of the tubing you will be attaching to. With the measurement that you have just taken, choose from the closest option below.

Circumference and clamp choices:

• If you have approx. 5.89" circumference (1 7/8" diameter), choose the 2.5" clamp
• If you have approx. 6.28" circumference (2" diameter), choose the 2.5" clamp
• If you have approx. 7.06" circumference (2 1/4" diameter), choose the 2.5" clamp
• If you have approx. 7.47" circumference (2 3/8" diameter), choose the 2.5" clamp
• If you have approx. 7.85" circumference (2 1/2" diameter), choose the 2.5" clamp
• If you have approx. 9" circumference (2 7/8" diameter), choose the 3" clamp
• If you have approx. 9.42" circumference (3" diameter), choose the 3" clamp

The Big Air Flag Holder allows you to showcase your pride at any angle!

Fits many tubing sizes!

With a two clamp size options; a 3 inch clamp or our 2.5 inch clamp, we can accommodate not only all Big Air towers, but other manufacturers as well.

We provide neoprene liners to accommodate down to smaller tubing sizes like 2.875 inch, 2.375 inch, 2.25 inch, and 2 inch tubing as well.

Please note, you will not use liners for 2.5" tubing size.

Install your flag holder higher or lower on the tower, the choice is yours. You can even mount on the top of the tower onto the Top Bar or H-Member. Installation is so simple, and we know you’ll love that!

Thumbscrew Included!

Allowing you to accommodate 3/4" to 1 1/8" tubing. We recommend a 7/8" tube with a cushioned end for best results, especially at higher speeds.

Infinite Rotation - always get the perfect angle!

With the turn of one single bolt, you gain infinite adjustment to accommodate any angle of pipe that you would like to attach to. Vertical, horizontal, or at a steep angle. We do not use a pin method for adjustments, which ensures that you get absolute 360 degree rotation.

Greg

"Love the quality of the flag pole and holder, we get tons of waves and thumbs up while on the water!"

David

"Awesome product and the envy of my friends!"

Adam

"I love the being able to fly a flag easily after using many different ways in the past to secure my flag to my tower this is the way to go."

Jeff

"I love my Big Air Flag Holders. They look great on my tower and everyone loves the way they look when the flags are flying."

Flags and poles sold separately.

• Towerless Wakeboard and Kneeboard Rack
• Holds one wakeboard, up to 1.25 inch thick and one kneeboard, up to 4.43 inches thick.
• Installs virtually anywhere on your boat Adjustable width placement for the racks that hold your boards. Max placement is approximately 12 inches.
• Billet aluminum construction
• Rubber inserts to protect your high end boards

User questions & answers

Question:	Will it fit 88 mastercraft pro star
Answer:	yes
Question:	Will this fit 21' length boat? Or should I go to the next size up
Answer:	I have a 19ft. It is just enough. I would go next size up
Question:	I have 18’ with swimming deck. Will this fit
Answer:	i had a 19 ft and that included the swim deck . it fir perfectly on the 19ft. Not sure about 18. But a great cover for sure especially for a boat with a tower. Well worth the price. I would give it a try and return it if it doesn't.
Question:	Would it fit 7ft beam
Answer:	Yes , great purchase

Product features

StormPro Ski & Wakeboard Tower Boat Cover

Weather the storm with StormPro, Classic Accessories' heavy-duty boat cover, constructed from a durable polyester fabric for all-weather protection and long-term storage.

Classic Fabric

High-strength polyester fabric provides durability and water resistance and is free of PVC carcinogenic chemicals.

Strapping System

Integrated buckle and strap system allows for easy fitting and trailering; adjustable straps snap into quick-release buckles on the cover.

Adjustable Fit

Rip-n-grip panels allow the cover to accommodate a variety of tower styles at the beam without compromising security and coverage.

Support Pole Included

Support pole included to prevent water from pooling and to help preserve the cover.

US-based company with 35+ years of experience

Classic Accessories was born in 1983 in a small basement in Seattle, WA. Our founder started by creating auto accessories like seatbelt pads, steering wheel covers, and fuzzy dice. Over the past three decades, the company has steadily expanded its range of products and distribution. Today, Classic Accessories is the leading manufacturer of high-quality covers, cushions, hammocks, umbrellas, and more. From the backyard to your favorite boat launch, we’ve got you covered.

Our Purpose

We don’t just cover vehicles and equipment – we support your lifestyle. Time outdoors is important, and we want to help you make the most of it. We share your passion for adventures, that’s why we carefully consider all the tiny details that make our products useful, convenient, and practical.

Design Process

Our US-based design team creates products that are easy to use, pleasing to the eye, simple to store, and built to last. We believe it’s all in the details.

We’re all about using high-quality materials and thoughtful features to give you the best experience possible.

Excellent Customer Support

Our customer support team provides you with excellent assistance and product knowledge. We’re committed to helping you with any questions or issues you may have.

Mounting conditions

• There must be access to the inside of the hull to install the mounting hardware. Line of sight is all that is needed.
• The area must be relatively flat, allowing the 2” diameter mounting plates to secure firmly.
• The area must be free of wires and clutter for drilling.
• The hull of the area must be no less than 3/8” thick.

How do I check my hull thickness?

The most common ways to check the hull thickness is to remove a cup holder, speaker, or other items already installed into the fiberglass. However, we highly recommend checking after you drill for reassurance as well.

Mounting Hardware Included!

2" Diameter Bar and Mounts

Neoprene Gaskets Included!

A small amount of curvature is allowed as the compression gaskets will take up some slack.

Bungee Included!

Secure your boards with the included bungee strap.

Product description

ORIGIN Advancer Wakeboard Tower -Polished -5 Year Warranty! Our tower will fit nearly any boat, bowrider, ski boat, clinker, alloy, inboard or outboard 17' to 22' in length. Measurements up to 86" between the front deck mounts 56" to 68" between front and rear mounts Rear legs will adjust to fit up to 100" If your boat is narrow you may have to cut the top tube. Materials Seamless 2.25inch, 6063 Aircraft Aluminium tubing. CNC Machined solid 6061 Aluminium Fittings. Stainless Steel Hardware. Lowering the Wakeboard Tower. The wakeboard tower was designed for low overhead storage. Rear legs detached from the deck mounts and swing backwards. The front legs pivot to lower the top section.

• Wakeboard Tower - Adjustable tower that fits boats from 68" to a 98" beam
• Wakeboard Tower for Boat - Universal tower design adjusts for width during installation. Fits most boats 17' - 22' in length
• Polished Aluminum Wakeboard Tower - All Tubing is 2.25 inch 6063 polished aluminum and hardware is stainless. Tower comes with mounting hardware and single bolt feet for an easy installation
• Easy Installation - The Advancer tower is an easy install. It will take 2-3 hours for installation.
• 5 year warranty from manufacturer defect

User questions & answers

Question:	Can you add a Bimini top to it
Answer:	Yes, you can add our Flat Cargo or Folding over tower bimini.
Question:	Will this fit 1993 searay
Answer:	Yes, it will fit
Question:	Does this wakeboard tower come with mounting brackets and all hardware
Answer:	Yes!
Question:	Can you pull a slalom skier with this tower
Answer:	No, you cannot pull a water skier.

• Fully adjustable articulating arm allows many options for viewing your riders.
• Large tournament style, 7 inch x 13 inch convex mirror.
• Ball joint mount on the back of the mirror allows additional pivot point for the best adjustments.
• 2.5" Clamp with neoprene liners to accommodate down to 2.375", 2.25", and 2" round tubing.
• Billet machined 6061 T-6 aluminum and finished with a high polish

User questions & answers

Question:	Does it need to be removed for travel on the road
Answer:	It is not necessary to remove the mirror for travel, no.
Question:	Will this fit axis T
Answer:	It accommodates many different towers
Question:	What size tower does this fit
Answer:	Thank you for your inquiry. The Big Air Mirror fits 2",2.25" and 2.5" tubing. Please let us know if you have any questions.
Question:	We measured the circumference of 6in, which gives a diameter of 1.9.... would this still work with the liners or is 1/10th of an in a deal breaker
Answer:	Great question. Technically, our mirror will accommodate 2", 2.25", 2.375" and 2.5" tubing with the supplied hardware. No liner is used for 2.5" tubing, to accommodate the smaller tubing sizes you will choose one single liner for fitment. While we do not supply a liner directly for 1 7/8" (1.9") tubing, you could combine the thinner liner with the thickest liner to help get you there without any issues. The thin liner will need to be shortened in length for the best possible fitment.

Product features

Tired of the cheesy windshield mount mirror? Step up to a Tower Frame - Articulating Mirror

Most aftermarket wakeboard tower mirrors use a single piece arm. This means that you mount it to the tower and there is no adjust-ability to it. Where you mount it is what you see. When using an articulating arm, you have so many options for adjustment. Since we use a 2 piece arm, there are actually more points that you use for adjustment.

Product description

Pyle’s marine speakers are constructed with stainless steel materials and other durable substances for a rugged sound system. The speakers are also waterproof and rated IP44 to withstand water. It is also weather resistant to combat sun damage.

Features:

• Includes Wakeboard Tower Speakers
• Waterproof Marine Grade Rated Construction
• Rugged, Durable & Sleek Stainless Steel Housing
• 2-Way Full Range Audio Speaker System
• Titanium Dome Tweeters
• Long Excursion Subwoofers
• Built-in Illuminating Blue LED Lights
• Integrated Universal Roll Bar Mounting Clamps
• 360° Degree Speaker Positioning via Clamp Mount
• Anti-Corrosion: Weather-Resistant / UV Resistant
  
  
  
  What's in the Box:
• Marine Speakers
• Integrated Mounting Clamps
  
  
  
  Technical Specifications:
• Power Output: 200 Watt MAX
• Sound System: 5.25'' Subwoofers, 1.0'' Tweeters
• Waterproof Marine Grade Rating: IP-44
• Boat Roll Cage / Roll Bar Support Size: Up to 2.53'' (6.45cm)
• Tweeter Type: Titanium Dome
• Frequency Response: 60 hz-20KHz
• Impedance: 4 Ohms
• Magnet: 10 Oz
• Sensitivity: 90 dB
• Construction Material: Stainless Steel, Engineered ABS Grills
• Speaker Housing Dimensions (L x W x H): 5.7'' x 9.6'' x 8.5''-inches (with Mounting Bracket)
• Sold as: Pair

• WATERPROOF IP44 GRADE: Comes with 2 marine speakers that are waterproof IP44 grade rated. Can be used for several vehicles because it has an anti-corrosion feature to withstand heavy water splashes and other outdoor conditions
• AUDIO SPEAKER SYSTEM: These wakeboard tower speakers have 2-way full range audio, Titanium dome tweeters and long excursion 5.25 inch subwoofers for a complete stereo speaker system. The power output is 200 Watt max
• BUILT-IN LED LIGHTS: Have built-in illuminating blue LED lights which is best used on wakeboard towers to add excitement for a fun water adventure. It has a frequency response of 60 hz-20KHz, 4 Ohms impedance and 90 dB sensitivity
• WEATHER RESISTANT: These weather resistant speakers are made of stainless steel housing for a rugged and durable design. They are also engineered with ABS grills to combat sun damage caused by ultraviolet rays
• 360° MOUNTING CLAMPS: The speakers are 360° degree rotatable so it can be positioned as desired. Each has a mounting clamp for easy and hassle free installation. The clamps are designed to be integrated for universal use

User questions & answers

Question:	Do these speakers require a seperate power amplifier to drive them
Answer:	Hi, yes it needs to be connected to an amplifier. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box PLMRWB50L for more details. Thank you.
Question:	Do the LED lights stay on continuously while the power is on, or do they flash based on frequency changes of the audio
Answer:	Hi, the LED light stays on if the speakers are connected to the power source. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box PLMRWB50L for more details. Thank you.
Question:	Is the 200 watt max output per speaker or is it 100 watts per speaker for a combined total of 200 watt output
Answer:	Hi, it is the wattage for 2 speakers. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box PLMRWB50L for more details. Thank you.
Question:	What is the minimum bar size they will fit on
Answer:	I mounted these on a 1.5 diameter bar and they are tight, I did cut down the bolts so they didn't extend way past brackets for a clean look, also if your bar is smaller you can cut extra rubber pads to achieve a tight clamp, I have done this with other wake board tower speakers. Hope this helps

Product features

Pyle Marine Speakers

Waterproof Marine Tower Speakers - Wakeboard Subwoofer Speaker System with Built-in LED Lights, Stainless Steel, 5.25'' (200 Watt)

• AUDIO SPEAKER SYSTEM: These wakeboard tower speakers have 2-way full range audio, Titanium dome tweeters and long excursion 5.25 inch subwoofers for a complete stereo speaker system. The power output is 200 Watt max
• BUILT-IN LED LIGHTS: Have built-in illuminating blue LED lights which is best used on wakeboard towers to add excitement for a fun water adventure. It has a frequency response of 60 hz-20KHz, 4 Ohms impedance and 90 dB sensitivity

Product description

A nylon collar bushing protects the tower and like almost all of our products makes the wakeboard rack universal. Each rack is shipped to fit 2"- 2 1/2" towers . Wakeboard Rack Features: Made with strong polished aluminum and fasteners Long lasting brushed, bright dipped anodized finish Thick rubber bumper protects boat and boards Adjustable fork to accommodate any size board Includes quick release mechanism for easy removal 。

• Fit clamp sizes:2 -1/4"- 2 1/2"
• 2 Boards, 1 Kneeboard ,1 wakeboard ,1 rope,3 sizes rubber inserts
• This Rack is made of aluminum ;Surface treatment is buffing and anodize finish.Can be used in seawater environment.
• Non-slip design, Protect your board.
• The rubber ring in the hole reduces the tower wear and shake.

User questions & answers

Question:	Can I use with a pair of water skis
Answer:	I have 2 wake boards and one them is hard to get in and out of the rack, and my ski's are thicker than the wakeboard , so I would say no.
Question:	What is the max thickness of the boards that the forks can accommodate
Answer:	forks are 1" tall.
Question:	Do you supply racks for water skis
Answer:	Sorry, we don't.
Question:	Why is the bungee cord so long
Answer:	Best to wrap around a tower.

Product description

Krypt Bat Wakeboard Rack. Quality polished aluminum wakeboard rack with rubber bumper inserts for board protection. Krypt Towers' unique bat rack back plate design. Most towers do not have a completely vertical leg, so why purchase a board rack that does not have an adjustable mount? Our Swivel mount wakeboard rack can be mounted to any tower in nearly 360 degrees.

Tower Clamp Size Available: 1 3/4", 1 7/8", 2", 2 1/4", 2 3/8", 2 1/2"

Bat Rack Back Plate

Polished Billet Aluminum Swivel mount that can be adjusted nearly 360 degrees

Fits both vertical and horizontal tower bars at virtually any angle Bungee cord for secure board fit

Soft rubber inserts for secure tight board protection

Gets your boards off your floor Secures 2 boards

• Full size wakeboard Tower Rack with Polished 6061 Aircraft Grade Aluminum, Double Polished to a Mirror Shine. -
• Wake Board Racks - High quality tower racks manufactured with only the best materials. Heavy duty construction will provide years of enjoyment.
• Our Swivel mount wakeboard rack can be mounted to any tower in nearly 360 degrees to level out the board rack horizontal with the boat - This rack can be mounted on vertical or horizontal bars at virtually any angle.
• Holds 2 x Wakeboards Soft Rubber Finger Inserts and Bungie Straps for Secure Board Protection - Secures boards in place during the choppy days at the lake or while traveling fast across the Lake
• Clamp Sizes: 1 3/4", 1 7/8", 2", 2 1/4", 2 3/8", 2 1/2"

User questions & answers

Question:	Any idea how well a quality spray paint would look on the racks
Answer:	yes this is what my son uses this for as well/
Question:	Can the clamp rotate 90 degrees? I have a fish and ski boat with hand rails (no wakeboard tower). The rails are 7/8" . Thanks
Answer:	Per the product description "The low stretch 16-strand 30-filament rope floats and has a 5 ft. handle bridle and three 10 foot take-offs (5, 35,10,10,10) for all riding styles." I haven't measured the rope myself but that sounds about right. In short, there are loops at 40', 50', 60', and 70'. And for what it's worth, I love the rope. The handle is very comfortable.
Question:	What size Allen keys are required
Answer:	Handles float. Doesn’t tangle anymore than any other tow rope i have used
Question:	How do I order this with a 3 inch clamp
Answer:	No. The second little handle is for doing "wrap" tricks. You hold the little handle and grab the main handle behind your back. Then in the air let go of the little handle. The rope will help to rotate you around.

Product description

Krypt Kneeboard and Wakeboard combo tower racks feature a unique combo design that gets both boards off the floor. We construct this rack with Black Powder Coated 6061 aircraft grade aluminum. Our fingers feature a large center finger to minimize board rattling and slapping together when on the go. Rubber bumper inserts are inside the fingers and bungie straps are included for complete board protection. The clamp will rotate nearly 360 degrees to help adjust the rack to a horizontal level This rack will fit all horizontal and vertical tubes and adjust to nearly any angle in between. Kneeboard finger opening is 4.15", and wakeboard finger opening is 1 3/8" Features Tower Clamp Size Available: 1 3/4", 1 7/8", 2", 2 1/4", 2 3/8", 2 1/2" Double Black Powder Coated 6061 Aluminum Clamp mount adjustable in nearly 360 degrees Fits both vertical and horizontal tower bars at virtually any angle Bungee cord for secure board fit Soft rubber inserts for secure tight board protection Gets your boards off your floor Secures 2 boards; 1 x kneeboard 1 x wakeboard

• Black Kneeboard Tower Rack for Boats, 6061 Aircraft Grade Aluminum, Double Polished to a Mirror Shine.
• KneeBoard Wakeboard Combo Racks - High quality tower racks manufactured with only the best materials. Heavy duty construction will provide years of enjoyment.
• Knee board tower rack can be mounted to any tower in nearly 360 degrees to level out the board rack horizontal with the boat - This rack can be mounted on vertical or horizontal bars at virtually any angle.
• Kneeboarding Rack Holds 2 x Boards; Kneeboard and Wakeboard, Soft Rubber Finger Inserts and Bungie Straps for Secure Board Protection - This will hold your board in place during the choppy days at the lake or while you traveling fast across the Lake
• Kneebord and Wakeboard Combo Rack Fits Tubing Clamp Sizes: 1 3/4", 1 7/8", 2", 2 1/4", 2 3/8", 2 1/2"

User questions & answers

Question:	Do they make something that will fit the square tubing on a pontoon
Answer:	This board does not have fins.
Question:	what is the opening for the kneeboard ours is tight at 6 in thick
Answer:	It is new, and the price is the same Thank you
Question:	Polished version is noted as not working on horizontal bars .. description here says this one will. Was there a change in design
Answer:	Yes
Question:	Does Krypt make this rack in white
Answer:	The product is at its prime through that date

Product description

Krypt Double Surf Tower Rack. Quality black powder coated 6061 aluminum double surfboard rack with rubber bumper inserts for board protection. This board rack holds 2 x Surfboards. The finger opening is 2.25". The clamp will mount at different angles on the backplate to mount on wakeboard tower tubing at any angle. This rack has a bungie cord that holds boards in the fingers.Features: Tower Clamp Sizes: 1 3/4", 1 7/8", 2", 2 1/4", 2 3/8", 2 1/2" Holds 2 x wakesurf boards Black Powder coated Billet Aluminum Angle mount that can be adjusted 360 degrees Fits both vertical and horizontal tower bars at virtually any angle Bungee cord for secure board fit Soft rubber inserts for secure tight board protection Gets your board off your floor Secures 2 surfboards

• Black Wakesurf Rack For Tower - Black Powder Coated 6061 Aluminum, Rubber bumber finger inserts for board protection.
• Douoble Wake Surf Rack Finger opening is 2.25" and will fit Wakesurf Boards up to 2.25" in thickness
• This Surf Tower Rack has Easy installation and attaches to round tubing towers.
• Secures 2 Surfboards/Wakesurf Boards, Bungie strap to hold boards secure
• Surfboard Rack for Boats with Tubing Clamp Sizes: 1 3/4", 1 7/8", 2", 2 1/4", 2 3/8", 2 1/2"

User questions & answers

Question:	Will this fit a FourWinns 2019 H
Answer:	It will fit the tubing size, but if it is a forward leaning tower, then it is the wrong rack; please contact our customer service
Question:	Will this fit a Yamaha 2014. 212x
Answer:	Yes, it will fit
Question:	Will this work on a axis tower 2015 t
Answer:	No, it will not have the 4 screw hole pattern your Axis Wakeboard Tower has. However, we have Axis Wakeboard Tower Racks at the following link: https://www.amazon.com/AXIS-Boat-Wakeboard-Tower-Racks/dp/B01MTNZQ5G/ref=sr_1_2?dchild=1&keywords=Axis+Wakeboard+Tower+Rack&qid=1581869361&sr=8-2
Question:	Is that black
Answer:	Yes, it is Black.. I updated the description to more clearly say it is Black