10 best kayak trailer kits

Product description

Malone Trailer Cross Bar Conversion Kit, 78in Bars, MPG475

• Fits most small boat trailers
• Kit also fits Malone MicroSport Trailers made from 2008-2012
• Complete system for one trailer
• Mounting Hardware included
• 78 inch Cross bars

User questions & answers

Question:	Is thismalone trailer cross bar conversion kit mpg
Answer:	Yes
Question:	The title says 78" cross rails, the desciption says 65". Which is it
Answer:	My rails are 77 3/8"
Question:	Will this support 2 Hobie PA14s
Answer:	It should be able to, all though I added J racks to mine to hold the kayaks.

Product description

" When Hauling Kayak, Canoe or SUP, you will find no place to attach the straps or rope for Stabilizing, or you will need to crawling around under your vehicle looking for a place to secure your bow line, then you need the Hood Loop Strap. This strap attaches to any available bolt heads under the hood of your vehicle to create an anchor point for securing load straps or boat tie-downs.

Installation

1,Open your Hood,Trunk,Cargo Hatch or doors

2,Leave the Black High Density EVA Foam pad inside, Pull the Nylon Straps out. Make sure it will not easily moved

3,Closed the Hood, Trunk, Cargo Hatch or doors, Now you have a anchor point to tie down and secure your Kayak/Canoe/SUP etc

4,You can use two in the front hood and two on the trunk for hauling your gears

Tips

1, Find a suitable place which is not easy to move around, especially in the hood, We recommand at the end of hood which is closed to the windshield. This will greatly help to avoid slid up.

2, To use this in a door or tailgate hatch may cause a leakage through the straps, So it ‘s better not to drive in a heavy rain, Which is safe and avoid leakage.

3, Too much teasion could cause the hood or trunk latch pop opened, so be careful When tighen the tie down straps,Cause the force exerted is transformed direclty to the locations.

Package Included:

-2 x Hood loop tie down straps

-2 x Hood Trunk loop tie down straps

-2 x Tie down straps

-2 x Polypropylene heavy duty ropes,

-1 x instruction"

• Ultimate Tie Down Anchor Strap kits for Hauling cars on top. 2 pcs of Hood Loop Straps, 2 pcs of Hood Trunk tie down straps, 2 pcs Tie down Straps, 2 pcs 16.4 FT long 1/4" Ratchet tie down polypropylene heavy duty ropes, help to solve all the problems that you need to securing your gears on roof top. One stop solution for all your needs
• 2 pcs 16.4 ft long 1/4" Ratchet tie down polypropylene heavy duty ropes, help to securing the front and end of your gears on rooftop. This can be use for tarp, tent or clothing thread for outdoor camping
• 2 pcs 15ft long 1" wide Tie down strap with metal clamp and anti scratch pads, 1200 lbs breaking strength. Extra wide straps help to Securing goods when driving on road,Multi usage for tie down all your gear on rooftop, trucks, Travel trailers,SUP,Ladders, Furnitures ,motorcycle, ATVs, Boat etc
• 2 pcs of 9.8"" Hood loop tie down straps with Dia 0.4"" grommet hole and 2 pcs of Hood Trunk tie down straps , help to create anchor point under your hood and back side of your trunk or tailgate , no more bend over or crawl underneath to find a solid locations. Tuck in the hoods, when not using them,No more hood scratch from straps and buckles

Product description

Feature:Made from high quality material with yellow zinc plating to resist rust and corrosion

Ideal for cars, trucks, carriages, trailers, ATVs, mowers, tractors and other farm equipment

Great for use on 3 point hitches and other frequently assembled and disassembled parts





Specifications:Pins diameter: 7.5mm/0.30inch

Pins length:45mm/1.77inch

Ring outer diameter: 47mm/1.85inch

Ring inner diameter: 41mm/1.61inch

Ring thickness：2.5mm/0.1inch

Material: High quality carbon steel

Finished: Zinc Plated





Package includes: 10 Pcs x Linch Pin with Ring

• 1. Product Type: High quality lynch pin assortment kit
• 2. Material: Yellow zinc plated, can resist rust and corrosion
• 3. Product Feature: Lynch pin rings are spring loaded to ensure a secure hold when installed
• 4. Application: Great for cars, trucks, trailers, ATVs, mowers, tractors and other farm equipment
• 5. Package Include: 10pcs 7.5mm x 45m Linch Pin with Ring

• Overall assembled length is 135in. and overall width is 62 1/4in.
• Payload capacity is 1,170 lbs. with a 1,400-lb. max. GVWR
• Includes two 4.80-12in. tires, light kit with flat 4-wire harness and connector, safety chain with S-hook, and 1 7/8in. coupler

User questions & answers

Question:	Where do I find replacement springs for either the 4x8 or 5x8 trailer
Answer:	That's kinda tricky. Springs for those sized trailers are not as plentiful as other larger trailers. You have to know the exact measurements of the old springs. Once you have that you can Google search for websites that sell those replacement parts. eTrailer.com is one place to start, but you can also check out Northerntool.com or even trailerpart.com. Hope that helps.
Question:	I want to purchase some spare tires for this trailer. What Load Range do I use? It looks like the spare tires are either Load Range C or D
Answer:	The tires that come with this trailer are 480 x 12 and have a load range C rating.
Question:	How high is the deck off the ground
Answer:	It's not 21" it's more like 8"-12"
Question:	How does it fold with the straight piece that runs from the hitch to the center of the deck
Answer:	The trailer folds at from just behind the trailer axle.

Product features

Convenience and Performance In One!

Large Capacity to Handle the Load

With a maximum payload of 1,170 lbs. and a maximum gross vehicle weight of 1,400 lbs., this 4ft. x 8ft. trailer more than pulls its weight! The trailer is ideal for hauling a wide variety of cargo.

Space-Saving Folding Design

The large overall size measures 135in.L x 62 1/4in.W x 18 1/2in.H to tow the load, but when the job is done, the front hitch and coupler, and front portion of the trailer are hinged to fold back between the wheels. The trailer folds into a compact size that measures 86 3/4in.H in the upright position, and rolls on casters for easy maneuvering around the garage, shop or shed.

Built With Quality Components

Take a rugged steel frame, and then top it off with a pair of smooth-rolling, 4.80–12in. tires. Add your own decking (not included) to create a hard-working, customized hauler.

Certified Performance

This handy trailer meets or exceeds all road-ready specifications and DOT requirements and is ready to hit the road at up to 45 MPH.

A Brand You Can Trust

Comes Fully Equipped

This trailer comes complete with everything you need to get hauling. From the 1 7/8in. coupler and the full light set with wiring, to the frame, leaf spring, and safety chain with S-hook, you're completely covered. All the parts are included for easy assembly (some assembly is required).

Features + Benefits

• Overall assembled length is 135in. and overall width is 62 1/4in.
• Payload capacity is 1170 lbs. with a 1400-lb. max. GVWR
• Includes two 4.80-12in. tires, light kit with flat 4-wire harness and connector, safety chain with S-hook, and 1 7/8in. coupler
• Certificate of origin will be mailed separately. Please allow time for processing

• The Adjustable Ladder Rack are designed to mount to the rain gutters of almost any enclosed or open trailer, can be used on flat or round roofs.
• Put 2" x 4" lumber (not included) into the brackets to act as crossbars for a customized ladder rack of any width trailer (4' to 8-1/2' wide).
• Material: This Cargo Roof Ladder Rack Bracket Kit is made from extruded aluminum and comes with stainless steel hardware.
• Load-bearing: Maximum load capacity is 100 lbs per crossbar. Improved weld adds strength and durability.
• Installation: Easy to install, 4 aluminum brackets mount to each corner of your trailer's roof.

User questions & answers

Question:	Will this mount to an angle iron style utility trailer
Answer:	sure
Question:	What is the material of the roof ladder rack
Answer:	Aluminum
Question:	What's true capacity of ladder rack brackets? Will hold a 10 Feet kayaks
Answer:	Yes. I have kayak and ladder on the rack.
Question:	Can i buyy just the four, bottom mounting brackets/plates? One "small" driving error left me with the uprights and crossbars, but damaged the mounts
Answer:	Sorry, sold as a set.

Product features

Material

This ladder rack bracket kit is made from extruded aluminum and comes with stainless steel hardware.

Maximum load capacity is 200 lbs, per crossbar no more than 100 lbs.

Feature

Help you Expand on an Existing roof rack to suit your carry needs for additional length or weight support.

Improved weld adds strength and durability.

Size

Height of overall bracket : 22".

Height from bottom of bracket to top of crossbeam: 19".

Put 2" x 4" lumber (not included) into the brackets to act as crossbars for a customized ladder rack of 4' to 8-1/2' wide enclosed or open trailers.

Install

Easy to install, mount 4 aluminum brackets to each corner of your trailer's roof.

Easily carry your ladders, kayaks and other things you want to carry.

Product description

Our 70231 Hitch Mount Truck Bed Extender effectively extends your truck bed for carrying longer payloads. Adjustable length and width allows for many different applications including: Ladders, Racks, Canoes, Kayaks, Long Pipes, Lumber and more. Constructed from heavy duty steel with reflective tape on the front and sides for increased visibility and safety. The side arms can be folded down to create supports for a portable work area and the 4 quick release clevis pins allow for quick assembly and disassembly. This product is designed to fit 2-Inch receivers and has a load capacity of 300 pounds. Length: 53-1/2-Inches from center of the 1/2-Inch hitch pin hole to the end of extension. Adjustable width from 28-1/4-Inches to 48-3/4-Inches, adjustable height from 4-Inches to 10-Inches. Hitch pin sold separately.

• Extends your truck bed for carrying longer payloads, designed to fit 2-Inch hitch receivers
• Adjustable length and width gives versatility for use in many different applications
• Features 4 quick release clevis pins for quick assembly and disassembly
• Reflective tape on front and sides for visibility and safety
• Side arms can be folded down creating the supports for a portable work area

User questions & answers

Question:	Can you use this to help steady and lever the kayak to the roof of suv? long kayak an i am trying to load more easily
Answer:	I use it for a Tacoma and it works perfect, but it'll work for a trailer too. The strap and S hook to secure to the truck will hold to anything...
Question:	My kayak fit in old civic, not in toyota camry. a good 4-5' stick out of truck, can i put on reciever hitch and use this? i can't afford trailer
Answer:	The box mine came in said China.
Question:	What’s the maximum length for hauling long materials
Answer:	Thanks for the inquiry! The ramp is not restricted to tall vehicles. It works with a variety of trucks and trailers of varying height. Boss Powersports Outlet
Question:	I have a Nissan Frontier crew cab with a 5+ ft bed + tailgate. Will this hitch mount give me 11' total to haul a 14' ladder
Answer:	The ramp works with the tail gate perfectly and has a strap that attaches to the rear bumper or hitch to secure it from moving. My bike weighs around 450lbs and I weigh 200, I've stood behind my bike on the ramp pushing it up while someone helped me load it. I've got a Honda Ridgeline and my buddy has an f150 and neither of us have had issues with the ramp or tail gates.

Product features

MaxxHaul 70231 Hitch Mount Truck Bed Extender (For Ladder, Rack, Canoe, Kayak

Safety First

Reflective strips on side and rear for added safety.

Versatile

Can be used vertically or horizontally.

Fast & Easy Assembly

Quick pins for easy assembly and installation.

Effectively extend1s your truck bed for carrying longer loads

Side arms can be folded down to create supports for a portable work area.

• Rear luggage rack required for installation
• Adjustable to fit different sizes: 8' - 10' length with 3' width
• Weight Capacity: 300 lbs when used as a hand cart or 70 lbs when attached to Rambo bikes
• Includes tie-down straps to secure your boat
• Features padded contact points to protect your kayak/canoe from scratches

User questions & answers

Question:	Can this be hauled by a car
Answer:	Is it possible? Yes. Can you? No. A trailer hauled by a motor vehicle requires state registration and a licence plate. In addition to the registration plates, a motor vehicle pulled trailer is required to have indication lights including: brake lights, turning indicator, reverse lights, hazard lights. Anything is possible but you would be violating the law and asking for trouble. Putting all that aside, the standard bearings and grease used in bicycle wheels are not designed to disperse heat from consistent speeds above 30mph without frequent tune-ups and/or replacement.. Just spend the couple hundred extra and get a small sporting trailer designed for motor vehicles..
Question:	Could this be used with a motorcycle
Answer:	No. A trailer hauled by a motorvehicle is required to have indication lights including: brake lights, turn signals, reverse (when applicable) and hazard lights. A motorvehicle hauled trailer also requires registration with the state/license plate. Without the indication lights, this would never pass a DOT inspection for registration and so would be illegal.
Question:	Can you use a different cargo rack that has a large weight limit
Answer:	I changed the hitch hook up so I could pull the trailer behind my ATV. Based on the way it pulls I don’t think anything heavier than a canoe would do very well.
Question:	Will it work with other bicycle racks or exclusively with the Rambo one
Answer:	I just bought a random rack and drilled a hole for the hitch. It works just fine. Just be careful about buying to flimsy of one because the trailer is heavy once the kayak is strapped on and will bend anything that isnt decent quality.
Question:	Does this item come assembled
Answer:	It comes un assembled. But it is a pretty simple process to assemble with a limited amount of tools. Instructions form Manufacturer are not the best. What I did was go on youtube and found several great instructional videos on how to assemble
Question:	What is the dry weight of this trailer
Answer:	The shipping weight is 151lbs. so it must be a bit lighter.
Question:	What’s the width between the wheels? Can it fit a 42” lawn tractor
Answer:	Yes if your careful. You will also need to mount a plywood deck on it.
Question:	Can I add a tonge extension?I have a 15' kayak I'd like to haul
Answer:	I added 8ft telescoping tongue extension to mine. Hauling 2 kayaks,utility box with gear and a cooler and is working fine.

Product features

Quality, Capacity and Performance In One!

Large Capacity that Hauls More

With a maximum payload of 1060 lbs. and a maximum gross vehicle weight of 1200 lbs., this 40in. x 48in. trailer more than pulls its weight! The trailer is ideal for hauling mulch, dirt, machinery, or a variety of other cargo.

Built With Quality Components

Take a rugged steel frame, and then top it off with a pair of 4.80–12in. tires with protective fenders to prevent rocks and debris from damaging your cargo. Built-in slots allow you to place your own side panels or stake siding to keep the load contained. Add your own decking (not included) to create a customized hauler.

Comes Fully Equipped

This trailer comes complete with everything you need to get hauling. From the 1 7/8in. coupler and the full light set with wiring, to the frame, pair of fenders, hub, slipper spring, and safety chain, you're completely covered. All the parts are included for easy assembly (some assembly is required).

A Brand You Can Trust

Certified Performance

This handy trailer meets or exceeds all road-ready specifications and DOT requirements and is ready to hit the road at up to 45 MPH.

Features + Benefits

• Sturdy steel frame for long life
• 1200 lb. GVWR with a maximum load capacity of 1060 lbs. to handle a variety of cargo
• Includes wheel fenders to prevent rocks and debris from damaging cargo
• 1 7/8in. coupler assembly with safety chains so your trailer stays secure
• Tail lights, turn signals and side running lights keep you visible on the road
• Meets or exceeds DOT requirements
• Rated for speeds up to 45 MPH
• Hitch height is 14.61in. when trailer bed is level
• Certificate of origin will be mailed separately. Please allow time for processing

Single Wheel Cart

Designed for the ultimate backwoods excursion. This cart allows the rider to access rougher terrain and narrower trails.

The trailer follows tight to the bike. Its lower profile allows for more cargo weight.

Kayak/Canoe trailer

Haul your favorite Kayak right to your launching destination securely and safely. Padded contact points protect your kayak from scratches. While simple ratchet straps secure it tightly in place.

Beach Cart

Built and designed for the ultimate outdoorsman. Haul your gear to the beach. Take it fishing, camping, or trail riding. The innovative design allows you to use it as a hitch hauler, pull it behind your Rambo, or use the comfort grip handle to pull it by hand. The built-in handle also doubles as a kickstand. Comes with 6 rod holders that stick into the sand for fishing on the beach, and the cart uses fat tires for easy use in the sand!

Bike/Hand Cart

The Rambo bike cart is a great add-on to any model of Rambo bike you have. Quick and easy attachment to the bike and smooth operation. Use it to haul gear, camping equipment, Treestands, or your trophy out of the backwoods. The cart also has a handle grab for use without the Rambo. Great for hauling fire wood or other loads around the farm when not using with your Rambo bike.

• ✨ 【Upgrade Trailer Light】-- SUZCO submersible brake tail light kit come with additional atomization strip, compared with other square LED trailer taillights, it has a wider field of view and faster start-up speed, high visibility LEDs have longer service life and less energy consumption.
• ✨ 【Waterproof & Submersible】-- The Submersible Led Trailer Lights' lens and shell are welded by ultrasonic technology to achieve IP68 waterproof. In addition, this hola boat trailer light kit uses stainless steel parts and 5050 LEDs, which can be waterproof and provide you with an excellent light source.
• ✨ 【Multi-Functions】-- Our utility led trailer light kit have 6 functions: stop, turn, tail, rear reflex, side marker, and side reflex. Also this stop turn LED tail lights Universal widely applicate for trucks, boat, car, trailers over 80", tractors, semi-trailer, special vehicle, semi-trailer, snowmobile, RV, snowmobile, camper.
• ✨ 【Accessories & Easy Installation】-- Trailer tail light kits can additionally meet your requirements for trailer wiring harness: equipped with a 25FT wiring harness, and it is more durable than the traditional copper coated aluminum wires and split Y-style color coded harness. And you can install it with the provided screws without drilling holes.
• ✨ 【Perfect Warranty】-- SUZCO guarantees that the products comply with federal legal standards and provide you with a 2-year warranty period. During the period of use, if you have any questions, please contact us. We will provide you with 24-hour online service to ensure that your problems are solved.

User questions & answers

Question:	If I encounter installation problems, how can I contact the seller
Answer:	Dear Customer, Any questions please contact us by email: [email protected]. -----SUZCO
Question:	Is the included mounting hardware stainless steel
Answer:	Dear Customer, Please do not worry about it, the accessories of our products are made of stainless steel. Any other qiestions please contact us by email: [email protected]. -----SUZCO
Question:	If I encounter installation problems, how can I contact the seller
Answer:	Dear Customer, Please do not worry about it, here if you have any questions please contact us by email:[email protected]. -----SUZCO
Question:	Do they use white or red LEDs for stopping/turning/tailing
Answer:	Dear Customer, YES, there will be a red light, which can be eye-catching enough. Any other questions please contact us by email: [email protected]. ----------SUZCO
Question:	How long is trailer tongue from the frame forward
Answer:	Per the manufacturer: the length of the tongue from the frame to the end of the coupler is 23.62in.(600mm).
Question:	Anyone "try" to customize it for a golf cart carrier
Answer:	My thought is a golf cart is too heavy. I did modify mine for a kayak trailer and its great.
Question:	Will a 275 gallon water tote fit on it? Measurements of the tote are 40x
Answer:	The dimensions would just fit. However, 275 gallons of water weighs 2,200 pounds. That is much more than the trailer is designed to hold. It is more suitable for lighter loads.
Question:	Is the 45 MPH rating strictly a function of the tire specs, i.e. would better tires be the only criteria to upgrade to safe operation at higher speed
Answer:	The mfg. states 45 mph. speed rating, different tires would not change this.

Product features

Quality, Capacity, and Performance in One!

Large capacity to haul more

• With a max. payload of 1060lbs. and 1200lbs. max gross vehicle weight, this 40in. x 48in. trailer pulls more than its weight
• • Ultra-Tow trailer is ideal for hauling mulch, dirt, machinery and a variety of other cargo
• Add your own decking (not included) to create a customized, heavy-duty trailer

Built to Last

• Rustproof aluminum frame is tough and lightweight
• Fenders protect cargo from rocks and debris
• Tough axle system smoothly handles heavy loads

The Ultra-Tow Advantage

Comes Fully Equipped

• Includes full LED light set with wiring
• Equipped with 1 7/8in. coupler and safety chain
• Includes two 4.80-12in. tires with aluminum fenders

Certified Performance

• Meets all DOT requirements and road-ready specifications
• Ready to hit the road upon assembly

Superior Service and Support

• Should you ever need service or support, help is a phone call or e-mail away

Features + Benefits

• Rustproof aluminum frame
• Large 40in. x 48in. bed
• 1,060-lb. payload capacity
• 1,200-lb. max. GVWR
• Ideal for hauling mulch, dirt, machinery or other cargo
• Aluminum wheel fenders prevents cargo damage from rocks and debris
• Meets DOT requirements
• 84in.L x 52 1/2in.W x 22in.H assembled
• Includes two 4.80-12in. tires, slipper springs, LED lighting, tail and turn signals, side running lights, wiring and connector, and 1 7/8in. coupler with safety chain
• Decking not included
• Assembly required
• Ships in two boxes
• Aluminum frame wall thickness: 0.12in.
• Certificate of origin will be mailed separately. Please allow time for processing

SUZCO Submersible Utility Halo Trailer LED Light Wiring Harness Kit 12V with 25FT Trailer Wire & LED HALO H/L Beam Guiding Light BAR

FEATURE

ⒶIP68 marine waterproof & submersible.

Ⓑ2x 2021 high beam guiding light bar.

ⒸMeets DOT Certified, FMVSS 108, and CMVSS 108 requirements for automotive lighting.

ⒹStainless steel screw.

ⒺHIGH-FLUX super bright 48 & 39-LEDs.

Ⓕ25-foot male & female 4-flat marine trailer wiring harness.

ⒼEasy installation & new full replacement light kit design.

Product description

There's no such thing as not enough room for another kayak, canoe, or ladder. Store your kayak overhead and out of the way. Smooth pulleys and latches make lifting even the heavy kayaks super easy. The exclusive rope locking mechanism prevents unwanted release and can suspend one product - 125 lb. load limit. Please note, you can mount this item as pictured on a 2 X 4 and screw the 2 X 4 to the joist or mount it right to the joist itself. Includes two complete Kayak Hoists.

FEATURES:

2 Complete Kayak Hoists Included.

Hooks are designed with a rubber coating to protect from scratches.



Easy to install and easy to use.



Robust engineering allows you to lift heavy products - 125 lb capacity per hoist.



For Ceilings up to 12 ft.



Safe locking mechanism prevents accidental release.



Raise your canoe, kayak, ladder, or bike to the ceiling with ease.



Home Storage.



WE OFFER A LIFETIME WARRANTY AND 100% UNCONDITIONAL FULL MONEY BACK GUARANTEE!

• ►RUBBER COATED HOOKS - Hooks are designed with a rubber coating to protect from scratches. Durable straps ensure that your kayak is secure and will not fail. We guarantee it.
• ►EASY TO INSTALL - Mount to your ceiling joist or rafter and so easy to use. With only the minimum of tools you can have your kayak hanging in your garage in no time.
• ►ROBUST ENGINEERING - allows you to lift heavy products, up to 125lb. Capacity. This is the kayak hoist that all the other are trying to copy. We don't cut corners. This is the original RAD kayak hoist you've heard about.
• ►INDOOR USE - For indoor ceilings up to 12 ft. high. Once the kayak is out of the way you free up so much floor space you won't know what to do with it all.
• ►SAFETY LOCKS - Safe locking mechanism prevents accidental release. No one wants to come home and find their kayak has fallen to the floor. The Rad Kayak Hoist is safe enough to park your car under.

User questions & answers

Question:	I have rafters rather than joists so I don't have anything parallel to the floor. Can the pulley's be mounted on rafter angles
Answer:	I think you could do that. The way the roping through the pully's works you have one rope end that controls one pulley and the other controls the other pulley. Once you have your strap ends set at the same level you should be able to hoist up and down by pulling on both ropes with the same tension.
Question:	how far do the pulleys hang down from the ceiling
Answer:	Depends on how you mount it, but it's not even the pulleys that are the problem as much as the hooks—they're very long. I threw out all my measurements, but the pulleys can be cinched up to about 6-inches from the ceiling when directly mounted, meaning NOT using the provided brackets that would hang them lower. I have a 10' ceiling and 17' boats that needed to hang above the garage door when open. To squeeze them in, I directly mounted the pulleys to the ceiling, which required taking the pulleys apart, which aren't designed to come apart, so I had to drill out the riveted axles and replace them with clevis pins. For the traveling pulleys, I had to do the same, but so that I could set a pair of low profile shackles inside the provided bracket instead of using the long hooks (see my review). On top of that, I have the straps as tight around the boats as I can get them.
Question:	Anyone use anything to keep straps from spreading besides the string across the hooks? I want to avoid the horror stories of the kayak slipping out
Answer:	Yes. The bottom of my kayaks are very slick and I had one strap slip while lifting one day. I have 10-foot kayaks. My pulleys are 6-feet apart. I tied a 6-foot piece of string on the straps under the kayaks so they don’t spread. I’ve had no problem since.
Question:	Does a 2 pack mean enough mounts to hang one or two kayaks
Answer:	2 pack means you can hang two kayaks. I just received mine but haven't installed them yet. But did open the package and there 2 full sets to hang 2 kayaks. Steve

Product features

Kayak Hoist Lift Garage Storage Canoe Hoists 125 lb Capacity 2-Pack

There's no such thing as not enough room for another kayak, canoe, or ladder. Store your kayak overhead and out of the way. Smooth pulleys and latches make lifting even the heavy kayaks super easy. The exclusive rope locking mechanism prevents unwanted release and can suspend one product - 125 lb. load limit. Please note, you can mount this item as pictured on a 2 X 4 and screw the 2 X 4 to the joist or mount it right to the joist itself. Buy with confidence!

Redesigned Straps

New improved STRAPS eliminate the fragile hooks that plague cheaper hoists, and allow you to lift heavy products, up to 125lb. Capacity.

Easy to install and easy to use.

Robust Engineering

Hooks are designed with a rubber coating to protect from scratches.

For Ceilings up to 12ft.

Versitile

Safe locking mechanism prevents accidental release.

Raise your canoe, kayak, ladder, or bike to the ceiling with ease.

• ✔【DURABLE MATERIAL】Made of tear-resistant, water-resistant oxford fabric material that won't fray in the wind
• ✔【LIGHTWEIGHT】Kayak flags are very lightweight, foldable and provide high visibility from any angle
• ✔【HIGH VISIBLE】The eye-catching red color is easy to notice and perfect warning flag to keep you safe
• ✔【EASY TO USE】Easy to install and remove. There are webbing straps to make it easier to carry
• ✔【VERSATILITY IN USE】Excellent safety equipment for towing kayaks, canoes, and boats. This kayak visibility flag helps you stay out of harm’s way