11 best bmx pedals

Product description

The Fyxation Gates pedal is a classic BMX style platform pedal made out of high impact nylon and built to take abuse. These pedals work great with most foot retention systems/pedal straps (FRS) on the market.

• High impact nylon body built to take abuse
• Wide platform for comfort and control
• 9/16" chromoly spindle/axel. Does not fit kids bikes
• Re-buildable loose ball bearings for easy maintenance
• Molded surface pegs for a super grippy ride
• Compatible with most pedal straps and foot retention systems
• Weight: 418 grams (left and right pedal)
• Length: 109mm, Width: 101mm, Depth: 26mm

User questions & answers

Question:	How do these perform in the rain? Good traction
Answer:	Thanks for your interest in the CNZ Audio Volume Pedal. It has three adjustments. The Minimum Volume knob, the Maximum Volume knob and the foot controlled Volume Level. There are no internal adjustments or buffer built into the pedal. Let us know if you have any additional questions. Thanks, CNZ Audio Family
Question:	Will they fit ynot straps
Answer:	No it isn’t. The idea is to be able to control your volume, freeing up your hand, and to be able to maintain that volume.
Question:	How do you access the bearings
Answer:	For the VP Junior the recommended Pot (per the Ernie Ball website) is the 250K, part number P06174. This can be found under ASIN B001FWYB16. This 500K Pot is for the MVP pedal.
Question:	do these come two to an order or do I have to order two separately
Answer:	I doubt this would work because to control a stereo (or two channel) signal, you have to have stereo wiring on the pedal internally. You might get some sound through, as the tip and sleeve would be connected, but the 'ring' would go to ground and that signal lost, unless the wiring of the pedal was also TRS. I use the pedal to control two keyboards on live gigs but only in mono. You can only control one keyboard in stereo. Two channels in, and two out. It would be nice if what you suggest were possible, but I think it would require 'Y' cords from keyboards in and out to amps generally. I know some mixers have stereo TRS inputs, when that would not need an unusual long 'Y' cord! Only answer is to use a small mixer which you can put on one keyboard, and mix two keyboards in stereo taking the stereo (two channel) output into each side of the pedal, and then on to your amp. You can get decent little mixers for about $100 although it's more to set up, and usually the more you use, the more there is to go wrong live! Unless you really NEED stereo, I'd stick to mono live. If it's a grand gig, I'd expect the PA to take each keyboard direct through a DI box and I would either rely on them to give me onstage sound through wedges or in-ears or feed my onstage Traynor K4 in stereo. If absolutely necessary to have foot control over volume, which would send a mixing engineer nuts, you are still left with mono on stage unless you use a small sub mixer. I have that option in my leads trunk with a small mixer, but live its best to keep it simple unless you have a sophisticated stage system! Hope this helps!

Product features

Why Gates Pedals?

The Gates pedal is a>most popular pedal. This versatile pedal mixes style, affordability, and effectiveness into one, making it great for BMX and urban riding.

Spindle

The 9/16" chromoly spindle is re-buildable with loose ball bearings for easy maintenance.

Wide Platform

The wide platform offers comfort and control while riding, enabling you to catch your pedals with ease.

Great Grip

You won't have any trouble staying connected to your pedals, as the molded in grip studs were strategically designed to grip your feet tightly.

• ✔Advantage: Double-sided 16 anti-skid nails on the surface of road bike pedals, extremely grippy,Non-Slip. Large platform shape, Long rides maintain comfort and pedaling efficiency
• ✔Lightweight, only about 450g/pair
• ✔Material: High-strength aluminum alloy material, wear resistant
• ✔Standard 9/16 inch screw thread. The platform pedals size: 81*91*20mm
• ✔Fit for: road bicycles, mountain bicycles, MTB bicycle, BMX pedals,exercise bike pedals,junior bicycle, city bicycle,folding bike pedals etc.

User questions & answers

Question:	Will these fit a 2017 specialized Langster Atlantis
Answer:	This pedal has two mode with a footswitch. In the first mode the pedal goes from zero volume to whatever volume is set on the amp. When switched to the second mode you can adjust a minimum volume other than zero.
Question:	Will these fit khs flite 2000 road bike
Answer:	Yes, I've used it with a Telecaster clone into a Fender 15W tube amp. Works fine, the boost is a mild one.
Question:	I have a haro with a 3 piece crank will these petals fit
Answer:	From 0 to 100%. In theory, you could make your volume pedal useless. Lol it is a great pedal. I use it a lot to cut down gain for rhythm. Reason, I bought this because you can lower both the input and output. It works great to bring down the volume to room level for big amps while still allowing full use of the volume pedals sweep.
Question:	I have fat feet. How wide are these pedals? The foot pad part
Answer:	Thanks for your question! The CNZ Audio Volume Pedal has a red LED indicator in the front on the top of the pedal. It is a battery low indicator light to show if your batter does not have enough power to operate the pedal successfully. The LED will will turn on briefly then turn off when it is plugged in as part of the power up test cycle if there is no battery installed. Please let us know if you have any other questions. Enjoy your new Volume Pedal! Thanks, The CNZ Audio Family

Product description

The Vice is an incredible all around trail flat.  It is simple, thin, grippy, and durable.  12 pins per side are enough to bite into any shoe out there and stick you to the pedals.  The wide, yet low profile bodies give you a planted feel yet stay out of the way of rocks and roots.  VP Vice is fully rebuildable wth the available Rebuild Kit and you can also drop 70 grams off of the set with our Forged Titanium Axle upgrade kit.

• Durable and light weight/ CNC machined aluminum bodies: 406 grams per pair
• Superior grip low profile platform: 14 Replaceable Back-Out Steal Pins per side
• Ideal flat pedal for Riders who value durability, serviceability, and products engineered to last with 105 x 105 x 17mm platform
• Perfect for riders who want grip and who are tired of destroying pedals and the cost of frequent replacement
• Full length Forged and Heat Treated Cr-Mo Axle; LSL and Sealed Cartridge Bearings

User questions & answers

Question:	Will these fit on my specialized rockhopper
Answer:	No
Question:	Used to wearing running or training shoes while riding. Will these pedals tear up my good ol snaks
Answer:	The pedal set comes with an adapter. Will fit 1/2" or 9/16" threaded crank arms.
Question:	are these able to be used on either side so you dont have to flip or roll them
Answer:	possibly by removing one reflector on each pedal
Question:	Where can i find the replacement pins specific to these pedals
Answer:	The pedals are loaded with 1/2in and it comes with adapters that can bump it up to 9/16. Hope this helps.

• DURABLE:Rugged nylon fiber surface+high strength Cr-Mo spindle bike pedals, which has shock-proof, abrasion and corrosion resistance
• SIZE:4.30(L)*3.94(W)*0.98(H)inches,0.79bls each pair,moer fitted to the soles,big tread bicycle pedals provide a more comfortable ride experience,make the ride safer
• Easy To Install:CR-L for left; CR-R for right. Sealed bearing bicycle pedals protect spindles from water and dust which will cause noise and other problems, let you enjoy cycling in raining or climbing
• Anti-Skid Nail:Anti-skid nails on each side provide more secure on the pedals and hold your feet in place. Even if they are covered with a thick layer of mud after a muddy ride, you don't worry your feet slipping off the pedals
• Standard: 9/16" spindle fits for BMX, MTB, Mountain Bike, Hybrid bike, Old School, Cruiser, Cyclocross Bike, Dirt Jumper, Folding Bike, Road Bike- Touring, Track Bike, Unicycle, Urban Bike - Fixed Gear 2 configuration:3 bearings and needle roller bearing can be chosen.

User questions & answers

Question:	is race face ok with these chinese knock offs to copy their cosmetic appearance almost identically? intellectual Property theft in china
Answer:	Yes, very good traction in the rain. But, this could depend a little on the bottom of the shoe too. But, ride my bike in the rain all the time.
Question:	Can screws be recessed? will you feel pressure points with thinner sole shoes such as puma speed cats
Answer:	For commuting, you absolutely can use straps with platform pedals -- indeed these pedals are specifically made to work with straps. I don't have specific experience with ynot straps, but looking at how they mate, its highly likely it would work. The gates straps from fyxation definitely work.
Question:	Are these legal to sell? they are exact copies of the raceface
Answer:	You pry off the plastic cap off the end of the pedal. These pedals can be rebuilt, I've done it myself.
Question:	this may sound like a dumb question, but can you stand on these pedals
Answer:	They send you two pedals do so you dont have go order another separately.

Product features

3 bearings / needle bearings

2 configurations, three bearings / needle bearings

Replaceable Pins

The hex-head threaded traction pins are replaceable, you can replace them whenever necessary. There are 16 hex-head threaded traction pins per side for providing sufficient grip and control while being the easiest to get off of in the event of a crash.

CR-L & CR-R

CR-L for left pedal and CR-R for right pedal. Before you install the new pedals, look for the 'L' and 'R' marking on the axle.

Standard 9/16" spindle fits for BMX, MTB, Mountain Bike, Hybrid bike, Old School, Cruiser, Cyclocross Bike, Dirt Jumper, Folding Bike, Road Bike- Touring, Track Bike, Unicycle, Urban Bike - Fixed Gear.

• Wide Platform Pedals: Lightweight Nylon composite body with a concave platform offers an optimal surface area for long ride comfort and pedaling efficiency.
• Build to last: Fully sealed bearing bicycle pedals keep spindles from water and dust which ensure great durability and performance.
• Safety first: 12 replaceable hex-head threaded traction pins per side offer more bite for increased grip and control.
• Easy to install: 4.8*4.1*0.9 inches, L for left pedal, R for right pedal. Standard 9/16” sturdy Chromoly steel axle bearing fits for most bikes.
• Universally: Suitable for commuting, recreational riding, BMX, cruisers bicycle, kids' bikes, road bicycles, MTB bicycle, mountain bicycles, junior bicycle, city bicycle, etc.

User questions & answers

Question:	Can I put toe cages on these, or do the pins help replace the need for toe cages ? Do you get enough traction to increase the up stroke like cages
Answer:	in all my years of working on bicycles, I've never encountered a non-standard pedal. if your Langster is built of standard design and you use standard tools to make adjustments, these will fit
Question:	Is the “blue” option more of a turquoise color
Answer:	Yes they are standard road bikes
Question:	will these pedals work with straps
Answer:	These are standard bike pedals so they should fit
Question:	Does it use a 15 mm wrench
Answer:	Hello, Pedal width is about 3.93in, suitable for most people's feet.

Product features

CR-L & CR-R

There is a user-friendly design for convenient installation. CR-L for left pedal and CR-R for right pedal. Before you install the new pedals, look for the 'L' and 'R' marking on the axle.

Replaceable Hex-head Threaded Pins

There are 12 hex-head threaded traction pins per side for providing sufficient grip and control while being the easiest to get off of in the event of a crash. Besides, as the hex-head threaded traction pins are replaceable, you can replace them whenever necessary.

Standard 9/16” for Universal Use

Standard 9/16″ threads to fit seamlessly with most bikes. Such as BMX, cruisers bicycle, kids' bikes, road bicycles, MTB bicycle, mountain bicycles, junior bicycle, city bicycle, etc. It will make sure you're riding far safer and avoid worrying about the screw loosening during cycling.

DU Material Washer

The rubber gasket constructed from DU material, so the overall weight of these pedals is kept to a minimum and use the DU material can decrease wear and tear , made to last a long time.

A Great Choice for Commuting

Commuting to work on your bike will save you money on fuel, at the same time, it will reduce your environmental impact. This flat pedal will help you reach that goal.

1. The flat pedal has a Nylon composite body and weighs only 6.28 OZ per side, a lighter flat bicycle pedal make you more energy efficient.

2. The platform is quite large to fit any size of foot or shoe, and the pedal surface features small pins help to keep your feet in place.

3. The bike pedals are exceptionally easy to use and install, which makes them a great choice for commuting.

• STURDY & DURABLE: Rugged nylon fiber surface+high strength Cr-Mo spindle bike pedals, which has shock-proof, abrasion and corrosion resistance
• GREAT GRIPS: Anti-skid nails on each side provide more secure on the pedals and hold your feet in place. Even if they are covered with a thick layer of mud after a muddy ride, you don't worry your feet slipping off the pedals
• WIDER PLATFORM & LIGHTWEIGHT: 4.1" wide platform and 0.8lb ultralight ergonomic design pedals with high speed DU bearings for long ride comfort and improve pedaling efficiency
• EASY TO INSTALL: CR-L for left; CR-R for right. Sealed bearing bicycle pedals protect spindles from water and dust which will cause noise and other problems, let you enjoy cycling in raining or climbing
• UNIVERSAL: Standard 9/16" spindle fits for BMX, MTB, Mountain Bike, Hybrid bike, Old School, Cruiser, Cyclocross Bike, Dirt Jumper, Folding Bike, Road Bike- Touring, Track Bike, Unicycle, Urban Bike - Fixed Gear

User questions & answers

Question:	Can these pedals fit a polygon siskiu n9 dual suspension mountain bike
Answer:	Lol I saw the same YouTube video you saw. The nylon plastic is made in the same factory in China. Fooker is assembled in China and the race face is assembled elsewhere. This is capitalism at its finest. If you Fookers don't like it, to bad.
Question:	Where can you purchase additional spare studs if you run out
Answer:	You can recess the screws if you want, but I did not because I usually wear basketball shoes or running shoes when I am riding my mountain bike. If I get into a situation where the grass or ground is wet, the spikes make sure my feet do not slip off the pedals. I also have a city bike with less agressive plastic spikes. I took the comfort pedals off the city bike and switched them with the original mountain bike pedals, and then these more aggressive pedals on the mountain bike, because especially in the early morning when the grass is wet and I stop to cross a grass medium my feet would get wet and when I put them back on the pedals they may slip. With these there is no slippage.
Question:	are these good for general in town riding or specifically for mtb trail or dirt biking
Answer:	Weird question but for $20 I bought a set. I've got over 500 miles on mine without any issues. If they break I'll pick up another set for sure.
Question:	is there allen on inside of pedal spindle (inside crank side) to install/uninstall? much easier than pedal wrench
Answer:	Yes. I've been using these for aggressive trail riding and some jumping for a few weeks now. No issues whatsoever. Grippy, light, and the exact same pedal as the more expensive Raceface Chesters.

Product features

Replaceable Pins

The hex-head threaded traction pins are replaceable, you can replace them whenever necessary. There are 20 hex-head threaded traction pins per side for providing sufficient grip and control while being the easiest to get off of in the event of a crash.

CR-L & CR-R

CR-L for left pedal and CR-R for right pedal. Before you install the new pedals, look for the 'L' and 'R' marking on the axle.

Standard 9/16”

Standard 9/16" spindle fits for BMX, MTB, Mountain Bike, Hybrid bike, Old School, Cruiser, Cyclocross Bike, Dirt Jumper, Folding Bike, Road Bike- Touring, Track Bike, Unicycle, Urban Bike - Fixed Gear.

The Best Choice for Riding

1. The flat pedal has a Nylon composite body and weighs only 0.4lb per side, a lighter flat bicycle pedal make you more energy efficient.

2. The platform is quite large to fit any size of foot or shoe, and the pedal surface features small pins help to keep your feet in place.

3. The bike pedals are exceptionally easy to use and install, which makes them the best choice for commuting.

• Ultralight Bike Pedals：Fully sealed bearing bicycle pedals keep spindles from water and dust which ensure great durability and performance.
• Safety first：More fitted to the soles,big tread bicycle pedals provide a more comfortable ride experience,ensure your safety during riding.Slide smoothly,High-strength aluminum alloy casting Body makes the bike pedals more durable
• Non-Slip Mtb Pedals：With 12 replaceable anti-skid pins on each flat pedals,it will offers great grip and support ,effectively reduce the foot skidding, make cycling safer and let you enjoy the pleasure of riding
• UNIVERSAL: Standard 9/16" spindle fits for commuting, recreational riding, BMX, cruisers bicycle, kids' bikes, road bicycles, MTB bicycle, mountain bicycles, junior bicycle, city bicycle, etc
• We offer you a full money back guarantee for 90 days and warranty for an entire year. You can receive your full money back if our product does not live up to your expectations. Your satisfaction is our highest priority

User questions & answers

Question:	Do you need special shoes for these
Answer:	I think they will fit any standard pedal fitting but best to check with a bike dealer.
Question:	Will the pedals fit on a diamondback sync 3.0 mountain bike
Answer:	I wear trail runners when I ride. No problems. No damage. The pedal studs are adjustable.
Question:	Do the studs damage the soles of your shoes
Answer:	Mine had no left or right sign on them
Question:	Are these good for general in town riding or specifically for mtb trail or dirt biking
Answer:	Here is a link but they are currently out of stock. https://www.universalcycles.com/shopping/product_details.php?id=70622 You can just use stainless steel M4 hardware also. Something like this - just pick the length you want. https://www.mcmaster.com/91292a108 https://www.mcmaster.com/90251a161

• LEFT & RIGHT PEDALS : To easy installation,We have divided the pedals on the left and right with signs, L for left; R for right. International standard 9/16 inch screw thread fits for BMX, MTB, Mountain Bike, Hybrid bike, Old School, Cruiser, Commuter Bike, Dirt Jumper, Folding Bike, Road Bike- Touring, Track Bike, Unicycle, Urban Bike
• LIGHTWEIGHT AND DURABLE: This mountain bike pedals weight only 0.66lbs(302g) , Sealed bearing biking pedals protect spindles from water and dust and let you enjoy cycling wherever you want with no worries. What’s more,This bike flat pedals was made with CNC integration aluminum alloy material,give you a sense of security, no matter how rough the terrain
• WIDE PLATFORM & SUPER GRIPPY: With 101mm wide platform pedals supports the foot more evenly when riding, provide more comfortable riding experience for you. Perfect for most shoes size under US 12 shoes.Besides, Stainless steel anti-skids spikes on each side of the mountain bike pedals provide the good grip for you,the studs effectively prevent your shoes from sliding off
• ULTRA SMOOTH BEARINGS: The spindle was made of chrome-molybdenum steel material, which is stronger than ordinary steel and features better load-bearing performance. Carbon fiber bushing outside of spindle make it more durable and anti-corrosion,keep flat pedals spin smooth and without noise .And gasket design prevent the water,dust or sand from entering to the road bike pedals to avoid the noise.In addition, The outer surface of the bearing in the middle is also protected by aluminum alloy
• LIFETIME WARRANTY: ROCK BROS ensures you a risk-free purchase! We offer you a full money back with any questions. You can receive your full money back if our product does not live up to your expectations. Your satisfaction is our highest priority

User questions & answers

Question:	Is the blue a metallic torquise, as pictured, or is the blue more of a metallic royal? Thanks
Answer:	The pins work incredibly well , you shouldn't need cages.
Question:	anyway to replace the pins
Answer:	Yes, it's a turquoise not a blue color.
Question:	Is it possible to replace the pins with sharper ones
Answer:	If you are going to use the non-slip bolts you may not be able pull your foot out in case of a sudden stop. I would say no.
Question:	I d never had rockbro pedals before...how are they
Answer:	Yes. 15 mm open end wrench fits.

Product features

CR-L & CR-R

There is a user-friendly design for convenient installation. CR-L for left pedal and CR-R for right pedal. Before you install the new pedals, look for the 'L' and 'R' marking on the axle

Durable Hex-head Threaded Pins

There are 8 hex-head threaded traction pins per side for providing sufficient grip and control while being the easiest to get off of in the event of a crash

Standard 9/16”

Standard 9/16″ threads to fit seamlessly with most bikes. Such as BMX, cruisers bicycle, kids' bikes, road bicycles, MTB bicycle, mountain bicycles, junior bicycle, city bicycle, etc

Wide Bicycle Pedals

We design with 104mm wide pedals, Suitable for most foot size. can withstand high pressure, durable without breaking,pls use with confidence

Product description

Offer: 3 years replacement, defect for manufacturer

• STURDY & DURABLE: Rugged nylon fiber surface+high strength Cr-Mo spindle bike pedals, With 3 bearings，which has shock-proof, abrasion and corrosion resistance
• GREAT GRIPS: Anti-skid nails on each side provide more secure on the pedals and hold your feet in place. Even if they are covered with a thick layer of mud after a muddy ride, you don't worry your feet slipping off the pedals
• WIDER PLATFORM & LIGHTWEIGHT: 4.4" wide platform and 0.8lb ultralight ergonomic design pedals With 3 bearings for long ride comfort and improve pedaling efficiency
• WIDER PLATFORM & LIGHTWEIGHT: 4.4" wide platform and 0.8lb ultralight ergonomic design pedals With 3 bearings for long ride comfort and improve pedaling efficiency
• UNIVERSAL: Standard 9/16" spindle fits for BMX, MTB, Mountain Bike, Hybrid bike, Old School, Cruiser, Cyclocross Bike, Dirt Jumper, Folding Bike, Road Bike- Touring, Track Bike, Unicycle, Urban Bike - Fixed Gear

User questions & answers

Question:	Will these fit a trek marlin
Answer:	99.999% sure they will fit. They are the standard pedal size, a right hand thread, and a left hand thread. Use a pedal wrench, or an Allen wrench - both work.
Question:	Will these fit a older giant
Answer:	Comes with an extra set. So you'll have plenty until years down the road when it's time to get another set of pedals. For 20 bucks you could buy another set of pedals instead of worrying about replacing studs.
Question:	do these really have three bearing? one of first reviews says it's not true
Answer:	They are sturdy and are highly effective at gripping all shoe types. While I predominantly use my bike off trail, I do ride a good bit on roads, and they work fine!! Great product for the price!!!
Question:	I wear a size 13 extra wide shoe. Is this pedal large enough
Answer:	Yes, there is an Allen wrench access on the inside of the spindle.

• 【16 ANTI-SKID NAILS】-- Double-sided 16 anti-skid nails on the surface of road bike pedals can provide great grips and adhesion, hold your feet in place. Even if they are covered with a thick layer of mud after a muddy ride, you don't worry your feet slipping off the pedals.
• 【STURDY & DURABLE】-- Made of high-strength aluminum alloy material, ultra strong, abrasion and corrosion resistance, make the pedals feature lighter weight and durability at the meantime. It's X-shaped structure design to make pedal more sturdy.
• 【SEALED & HOLLOW DESIGN】-- This platform pedals spindle is completed sealed to prevents water and dust from entering. With hollow design that allows to feature lighter weight, only 0.44lb/199g, which help reduce bike burden and make it faster.
• 【WIDEN PLATFORM PEDALS】-- 4.9×3.7" / 125x95mm widen platform pedal ergonomic design for long cycling comfort and improve pedaling efficiency, standard (14.1mm) 9/16 inch screw thread.
• 【WIDE APPLICATION】-- Perfect fit for most bikes like BMX bike, MTB bike, cruisers bicycle, diamondback bicycles, folding bike, road bike, track bike unicycle, urban bike etc.

• ▶▶ FEATURE: Ultralight Pedal, Nylon Fiber material, Light But Strong, High Working Performance, More comfortable and durable
• ▶▶ MATERIAL: Corrosion-resistant spindle, Anti-slip locking spinkes, Nylon / glass fiber pedal body, Barrel-polished aluminum screws, make the bicycle pedal more solid and reliable, effectively reduce the foot skidding, make cycling safer and let you enjoy the pleasure of riding
• ▶▶ SIZE: MAKE SURE YOUR SIZE IS 9/16'', Item Weight: approx.0.78LB. (355g) / pair; Installation Tool: 6 mm / 15mm Hex wrench; Item Dimension: 4.84'' * 4.15'' * 0.94'' / 123 mm * 105.5 mm * 24 mm Bearings: 1 Item Color: Blue / Red / Orange / Black "
• ▶▶ EASY TO INSTALL - L for left pedal, R for right pedal,please check the “L” and “R” mark before doing the installation. screw thread is 9/16" and the diameter is 1.43 cm, Suitable for Road Bicycles, Mountain Bikes, BMX Bikes, etc.
• ▶▶ Manufacturer Warranty: 1 years warranty against manufacturer's defects

User questions & answers

Question:	Can I use these on my peloton
Answer:	No it’s blue
Question:	Are the pins adjustable
Answer:	I believe if you go to there website you can get new pins
Question:	Are the bearings smooth
Answer:	Check their web page
Question:	the screws seems can be adjustable and replacement, can i get some extra
Answer:	It’s great!

Product features

Black

Blue

Orange

Red