13 best bicycle water bottle cages

• 4 X M5 x 12 SCREWS INCLUDED: The screws are standard size for water bottle mounts to most of bikes with DRILLED HOLES, and washers are suggested for tight fixing.
• 6061-T6 HEAT-TREATED ALUMINIUM ALLOY: High quality material and manufacturing process for extra strength and durability combined with low weight, 2.1 oz (61g) each. FIT FOR PLASTIC WATER BOTTLES. ATTETION: ALUMINUM WATER BOTTLE MAY BE SCRATCHED ON SURFACE.
• EASY INSTALLATION: Use a 4mm hex key (included) to fasten cages in screw holes on frame. PLEASE NOTE - bike frame requires threaded holes for installation of cages.
• WATER BOTTLES FIT: 26 OZ water bottle can fit snugly; min bottle diameter is 2.75inch(68.9mm) max bottle diameter is 3inch(76.2mm). The water bottle cage has arms (adjustable) that wrap around the bottle for a secure and firm hold so you don't have to worry about it falling out during your ride.
• Back up from USHAKE : These Bike Water Bottle Holders are designed to be used for long term, if there is any issues about the product, please inform us and we will follow up closely.

User questions & answers

Question:	Will these fit trek road bikes specially the domane alr
Answer:	Hello, I specially inquired about the size of 32oz wide mouth Nalgene tritan water bottle. Its diameter is 3.5 inches (89mm) and height is 8.25 inches (21cm). Our bike water bottle holder can put in water bottles with a diameter of 3.9 inches (99mm) and a height of 8.25 inches (21cm). I hope my answer is satisfactory to you.
Question:	How far apart are the screws on this water bottle holder
Answer:	Hello, our bike water bottle holder bag fits most mobile phones. It 's side pocket size is 3.7 * 3.9in. You can put in the biggest cell phone, Samsung Galaxy note20 Ultra, which is much larger than other phone. I have tested it.
Question:	Will this fit a powerade bottle 32 oz
Answer:	Hello, Our bicycle water bottle holder can put in water bottles with a diameter of 3.9 inches (99mm) and a height of 8.25 inches (21cm). In addition, the sewing area and straps of our water bottle bag have been reinforced and upgraded
Question:	Are these scratching the stainless bottles
Answer:	Thank you very much for your experience, and you provide a good suggestion. We also suggest that it is best to fix 4 Velcro to your bicycle frame and bar. And in order to be stronger, please tie 2 or more Velcro straps on the top or side to bear the weight. The Velcro strap at the bottom is just to help prevent the kettle bag from shaking from side to side, but don’t tie it too close. Otherwise, you may pull your bike water bottle holder bag when turning. We have shown the installation instruction for you in Picture 7. Please refer to it. Thank you!

Product features

DRILLED HOLES REQUIRED!

DRILLED HOLES REQUIRED!

CREATIVE!

DRILLED HOLES REQUIRED!

ULTRA LIGHT WEIGHT

• 6061-T6 HEAT-TREATED ALUMINIUM ALLOY: High quality material and manufacturing process for extra strength and durability combined with low weight, 2.1 oz (61g) each
• ANODIC OXIDATION: maintains black surface more durable and NO SCRATCHES to your water bottles.
• 4 X M5 x 12 SCREWS INCLUDED,: The screws are standard size for most of bikes with DRILLED HOLES.
• If it's not workable for your bike, please use your old screws or purchase separately from your local store.

DRILLED HOLES REQUIRED!

WELL DESIGNED FOR MOST STANDARD SIZES BOTTLES.

• 26 OZ water bottle can fit snugly; max bottle diameter is 3"(76.2mm). The water bottle cage has arms that wrap around the bottle for a secure and firm hold, which also allows you to change the size to fit different water bottles.
• CARRYING 2 BOTTLES WATER--help you to ride longer mileage without worrying about thirsty.

Product description

SUPERIOR MATERIAL:

bottle cages are made of 100% Japan TORAY 3K Carbon Fiber,non-deformable, corrosion resistant,extra strength and durability combined with low weight ( only 25±1.5g ), effectively reduce the weight for long-distance travelers.



EXCELLENCE DESIGN:

With smooth edges, will not hurt your hand and kettle. Matt Black shows composed personality, and brings you full sense of sports.



FITS MOST STANDARD SIZES BOTTLES:

This bottle holder fits most standard sized water bottles and adjustable oblong mounting holes.The bottle cage is around 2.83 inches (7.2cm) in diameter, fit bottle dai 2.79-2.87 inches (7.1-7.3cm),bottle too big or too small may not fit firmly.



DESCRIPTIONS

Material: Japan TORAY 3K Carbon Fiber

Surface treatment: Matt

Diameter: 72-75mm

Net Weight: 25±1.5g



WHAT'S IN THE BOX

1 x Full Carbon Fiber Bike Bottle Cage

2 x Screws



Our guarantee: We are totally obsessive about quality and customer service – if you have any questions please get in touch and we will do everything we can to solve them.

• 100% FULL Carbon Fiber Material - Incredible strong and lightweight(only 25±1.5g), non-deformable and corrosion resistant.
• Holding power keeps the bottle in place when riding over rough terrain.
• Easy to install, designed to offer secure bottle hold and easy bottle removal.
• Perfect for those who want a stylish cage to lighten their load as they ride.
• Size - The bottle cage is around 2.83 inches (7.2cm) in diameter, fit bottle dia. 2.79-2.95 inches (7.1- 7.5cm), bottle too big or too small may not fit firmly. (Pls kindly note that the package included 2 pieces bottle cage holders, due to packing space limitied, 2 cages are superimposed together tightly, need to be separated before use them.)

User questions & answers

Question:	Would this cage hold on to a bottle on single track down hill trails
Answer:	You can order 1 or you can order 2. If you order one that has 2 in picture you will receive 2.
Question:	Camelbak podium chill 21oz will it fit
Answer:	There are 2 cages, very light and works well with Camelbak Podium Chill water bottles.
Question:	Is this 1 or 2 bottle cages
Answer:	Nם!
Question:	Is there 1 or 2 cages
Answer:	Plastic with carbon fiber finish inside.

• Fits bottle with diameter range from 74mm to 90mm
• High quality ultra light water bottle cages, Only 23g/pc
• A stylish, No logo design for clear and clean appearance
• Holding power keeps the bottle in place when riding over rough terrain
• High modulus carbon fiber, 3K construction, incredibly lightweight and strong

User questions & answers

Question:	Will they hold a Camelbak 25 ounce Big Chill water bottle
Answer:	Yes. It seems like it's real Carbon. It sounds the same as my carbon bike when I tap it.
Question:	Are these cages glossy or matte
Answer:	They are made of actual carbon fiber, I have had 2 sets of these on two bikes for over 1 year and they have held up and worked wonderfully well.
Question:	Is this made with real carbon fiber
Answer:	I really don’t remember the packaging other than it was minimalistic. I would imagine they were made in China. I can tell you they are lightweight and highly functional however...best I’ve ever had.
Question:	is this actually made out of carbon fiber or is it just painted that way
Answer:	yes

Product features

Equipped with screws

• Equipped with screws for easy installation.Helps ensure your position and securely hold the bottle in place.

Fits most standard & over sized bike water bottles

• Suitable for most bottles with a diameter of 74-90 mm.

Bike frame requires threaded holes for installation for bottle cage installation

• Suitable for mountain bikes, road bikes, folding bikes, etc.

Product description

Please kindly note: Pre-drilled holes on bike frame is required



Skoloo Standard size water bottle Cage

Material: 6061-T6 SOLID HEAT-TREATED ALUMINIUM ALLOY



Specification:



Maximun bottle diameter: 3 inches (76mm) or 26 OZ



Cage Weight: 2.4 oz (68 g)

Cage size: L * W = 6 * 3.5 inches ( 153 * 89 mm)

Cage profile thickness: 6mm



Mounting hole-center distance: 25 inches (64mm)

Elongated screw hole 1/5 *1/3 inches (5*8mm)

Allen head screws sizes: M5x12mm



Feature:



* simple & well made

* Snuggly fit for most standard bottles

* Anodized surface to protect your bottle from being sctrached

* Improved designed for clasping more securely.

* Elongated screw hole to avoid that the holes on the frame are off a little

* Easy to assemble/disassemble



Pakage Including:

Skoloo Standard Bike Water Bottle Cages

allen key

allen head screws (M5x12mm)

metal washers



This product is covered by Skoloo's Lifetime Warranty

• 1.IDEAL FOR MOST STANDARD BOTTLES: Snugly fit bottle diameter around 3 inches , or 40 OZ. ( can be adjusted by bending ).
• 2.IMPROVED DESIGN FOR SAFER HOLD: By adding 2 smooth bolt on each side of the U shaped arm, the holder clasps the bottle more securely when cycling or dirt biking.
• 3.6061-T6 HEAT-TREATED ALUMINIUM ALLOY: 6mm thick profile, Sturdy metal, Ultra lightweight 2.4 oz (68 g).
• 4.EASY INSTALLATION: Simply mount the cage to the pre-drilled holes on bike frame with allen key. Mounting hole-center distance: 25 inches (64mm).
• 5.Comes with 2 packs of bicycle water bottle rack; 5 x allen head screws (M5x12mm), 5 x washers, 1x allen key for each bottle cage; Color: Blue; LIFETIME WARRANTY.

User questions & answers

Question:	Will this cage hold a yeti rambler 18 oz or 26 oz bottle on a mountain bike trail
Answer:	This bicycle water bottle cage is suitable for the bottle of outside 3'' diameter. For the 26 oz 3 3/8''diameter, just try.
Question:	What is the distance between mounting holes ? In inches please
Answer:	The distance between mounting holes is 2.5 inches
Question:	My bike is predrilled for under bar mounting. Will this work mounted under rather than over the bar
Answer:	Hello, most bicycles have self-contained mounting holes, so bicycles can install kettle cages. If your bicycle has an installation hole, it can be installed. Most of the effect pictures are the same as the one we show, above the bicycle bar. But，with the help of a fixed screw fitting, you can try to install it under the bar.
Question:	Does 2 come in a pack??? Just making sure Thanks
Answer:	Yes, Skoloo Bicycle Water Bottle Cages-2 Black, with two black bicycle bottle cages in one package, just like the main picture you see

• ✅Suitable for Most Bike Bottle With SINJEE water bottle holder for bike: Bike water bottle cages arm that wrap around bottle fits most standard & over sized bike water bottles, including 20, 21, 24, 25 & 33 oz / ounces (500, 550, 650, 750 & 950 ml sizes).
• ✅Easy to install with SINJEE water bottle bike holder): Bottle holder for bike is easy to install and comes with 4 hexing screws to hold the water bottle firmly along the frame of your bike.Mount on your bike frame in under 60 seconds. Bike frame requires threaded holes for installation of bottle cage.
• ✅SINJEE mountain bike water bottle holder hold firmly: Strong Holding power absorbs vibrations, holds tightly the bottle in place when riding over rough terrain. Super toughness, encountered strong impact will not be deformed and broken with SINJEE biking water bottle holder.
• ✅Stay Hydrated on your ride with SINJEE giant mountain bike water bottle holder - Quick access to your bike water bottle when you need. Great for road, mountain, hybrid, touring & electric bicycles.
• ✅-Durable & Highly Resilient: SINJEE bicycle water bottle holder is made of polycarbonate and glass fibre-reinforced ensure it's light and highly resilient, making it perfect for road or trail applications.

User questions & answers

Question:	On my mike i can only mount the water bottle cage horizontally, will my bottle fall out
Answer:	I have a folding bike with a horizontal top tube where mine is also mounted. I had a plastic holder with similar shape that bottles fell out of. This is much more secure but no less convenient. I was frankly surprised to get excited over a water bottle cage... but i was.
Question:	I want to know if they are indeed side access bicycle bottle holder
Answer:	Not from the side. The bottles goes in from the top.
Question:	Can you bolt this water bottle cage so you can pull to the left
Answer:	No, straight up or right.
Question:	Is it easy to take the water bottle out and back into the cage while riding the bike
Answer:	Yes, if u place water bottle cage in a good area for that.

Product features

Small Size and Extremely lightweight Of This water bottle rack for bike

For this bicycle bottle cage, You also don’t want to add a mountain bike water bottle holder only to end up with an annoying weight to your mountain bike. and it is only just 35g only.

Sturdy and Durable Design With This cup holder for bicycle

Because these bicycle cup holder will be exposed to demanding outdoor use, they need to be very durable. Polycarbonate with glass fiber-reinforced construction will play a crucial role.

Bike Drink Cage Fits to Most Size Of Water Bottles

This bottle cages for road bike has a bottle size adjustment nose feature which ensures all known bottle sizes fit most standard & over sized bike water bottles, including 20, 21, 24, 25 & 33 oz / ounces (500, 550, 650, 750 & 950 ml sizes).

Easy Access For This bike drink holder

SINJEE bike water holder allow you to ease of access of the water bottle from the holder before opting for any model. Of course, the water holder for bike must always allow easy insertion and removal of the water bottle from the cage.

Carry Two Bottles And One Time and Packing Details

Hence you will not feel thirsty when you have the option of carrying two bottles at one time which makes it the most convenient way of going on a trip with this water bottle bike holder.

• 1pcs SINJEE Bicycle Kettle holder
• 4pcs Screws
• 1pcs inner hexagon wrench

Inexpensive Bike Water Bottle Holder

This bicycle drink holder is among the key determinants when it comes to choosing a water bottle holder for your bike, as many inexpensive models outshine the expensive ones. However, comparing the quality and features of the models help make the final decision according to your budget.

Drink Cage for bike Comes With Necessary Accessories

This bicycle bottle holder comes with 4 hexing screws to hold the water bottle firmly along the frame of your bike. Your bike will, however, require threaded holes along the frame in order to work with this water bottle bike holder whenever you need it to.

Simple and Easy For Installation

The easy installation of the oval mounting frame is quick and easy that can be mounted on the bike frame With this water bottle bike cage.

Product description

Quick and easy access to water bottles, lightweight extra strength, stylish and fits oversized bottles. Keeps a firm grip on water bottles.

Specifications

Material: 6061-T5 Heat-treated aluminum plate

Weight: 1.5 oz. (43g)

Dimensions: 4.5" x 3.5" x 3.5".

• AVAILABLE IN FOUR COLOR: Black, Carbon Patter, Silver, and White
• LIGHTWEIGHT MATERIAL: This bottle cage is made of 6061-T5 head-treated aluminum plate. Each bottle cage weighs 1.5 ounces. The high-quality material and manufacturing process reinforce for extra strength.
• FITS MOST STANDARD SIZED WATER BOTTLES: This well-designed bottle holder fits the bottle diameter around 3” perfectly. The ovalized design help you easy access to your water bottle while in motion.
• EASY INSTALLATION: Use a 4mm hex key (not included) to fasten cages in screw holes on frame. The included 4 X M5 X 12 screws are standard size for water bottle cage mounts. PLEASE NOTE – bicycle frame requires threaded holes for installation of bottle cages.
• ONE YEAR LIMITED WARRANTY: This product is covered by BikePak warranty. We are so confident you will love this product that we offer 30 days Money Back Guarantee with 1 year warranty!

User questions & answers

Question:	Does the black finish chip or wear off
Answer:	The update version have new design and the J1772 connect is IP67 waterproof (higher level), the control box had more protection.
Question:	Will this hold standard, store bought 16 / 20 oz water bottles
Answer:	Hello there, thank you for asking. The temperature display on screen is the temperature of control box.
Question:	can this hold starbucks cups
Answer:	The typical NEMA 14-50 socket is not designed to be plugged and unplugged on a regular basis. Heavy Duty models exist, but this will often just result in wearing down the pins of the plug on the charging cable. Also note a 50A switch is different than a breaker. Do not use any breaker to regularly remove power except when its circuit is being maintained. Breakers are easily broken by such repeat use. For its part, the Mustart has delicate electronics to respond to the request of the car. Leaving it plugged in leaves it exposed to transient power surges in your local neighborhood, such as lightning strikes. The best solution is a whole-house surge suppressor such as https://amzn.to/31S7ls3. Then the Mustart can remain plugged in as well as protect other delicate items in your home such as televisions and computers.
Question:	Will this hold a big bowl of pop corn
Answer:	Car chargers stop charging when the battery is full. No harm keeping them connected after the battery is full, except in wet weather, perhaps.

Product features

Bicycle Bottle Cage

Simple, Lightweight, Cycling and Life.

High Quality Materials

This bottle cage is made of 6061-T5 heat-treated aluminum plate. This material is usually used for the bicycle frames and components.

Extremely Lightweight

Weighs 1.5 ounces (43 grams).

Easy Installation

3mm Hex Wrench needed (not included), and each bottle cage comes with 2 screws.

Well-Designed Features

Simple and Sleek Design.

• 【REAL LIGHTWEIGHT】Each cage 1.28oz (36.5 gram), light 40% than others. It will not add too much to your bike.
• 【FIT MOST BOTTLE】26 OZ water bottle can fit snugly; max bottle diameter is 3"(762mm). The water bottle mount has arms that wrap around the bottle for a secure and firm hold so you don't have to worry about it falling out during your ride.
• 【FOR MOST BICYCLE】Can be used for road bike, mountain bike and electric bicycle.
• 【STRONG AND DURABLE】High quality 6061-T6 heat treated aluminum alloy.

Product features

Quick & easy installation

It's extreme easy installation. Just to tighten up the screws. Take less than 1 minute!

Like feather

SRAMI bottle cage only 1.28oz. Just like feather. It will not add much load to your ride!

Strong weld

What does it mean built to last?

Here it is. A full welded panel makes the holder much more stronger!

• Durable Quality - The water bottle cage made of high quality PC material, durable, lightweight, will not attrit the bicycle frame and easy to install. Great for road, mountain, hybrid, touring and electric bicycles.
• Secure and Sturdy Bottle Retention System - Ensures a full bottle stays firmly in place when riding. Fits most standard & over sized bike water bottles.
• Quick & Easy to Install - Including necessary mounting fittings, the screws are standard size for water bottle mounts to most of bikes with drilled holes, and washers are suggested for tight fixing.
• Better Design - The water bottle holder has arms that wrap around the bottle for a secure and firm hold so you don't have to worry about it falling out during your ride.
• Stay Hydrated on Ride- Quick & Easy access to your bike water bottle when you need it. Buy 2 bottle cages to stay hydrated for those extra long rides, so you can go the distance.

User questions & answers

Question:	Do these fit in any bike
Answer:	Should fit any modern bike with pretapped mount points.
Question:	Can these hold 40 oz hydro cell water bottle
Answer:	Probably not, I returned them because they were too small for my 24oz standard bottles.
Question:	Is there 1 cages or 2 cages
Answer:	it comes with 2 cages and 4 screws.
Question:	Can it securely hold a Hydroflask
Answer:	a Hydroflask will be too big for these. They don't flex hardly at all.

Product features

Better Design and Durable Quality

The water bottle holder has arms that wrap around the bottle for a secure and firm hold so you don't have to worry about it falling out during your ride. Buy 2 bottle cages to stay hydrated for those extra long rides, so you can go the distance.

Fantastic Design and Finish

The water bottle cage made of high quality PC material, so you don't have to worry about it attrit s the bicycle frame.

Attaching two bike bottle holders on your bike for those extra long rides.

Lightweight and Portable

The two bike holders only weights about 4 ounces. It is easy to carry on and clean.

Secure and Sturdy Bottle Retention System

Ensures a full bottle stays firmly in place when riding. Fits most standard and over sized bike water bottles.

• Durable and Firm: The water bottle cage made of high quality Alloy Aluminum, durable, lightweight, will not attrit the bicycle frame and easy to install. Great for road, mountain, hybrid, touring and electric bicycles.
• Hold Tight and Less Scratch: Our water bottle cage has a secure and sturdy hold that will ensure that the bottle stays firmly in its place even when riding fast or on bumpy trails. Frosted surface and smooth edges will reduce scratch.
• Fits Most Standard Size Water Bottles: This Water Bottle Cages are made to fit any water bottle in standard size.The cage can be slightly bent to open or close to change the tension on the bottle. The integrated flexible design can accommodate most kettles with diameters ranging from 2.84 to 3.54 inches (72-90 mm).
• Quick & Easy to Install: Including necessary mounting fittings, the screws are standard size for water bottle mounts to most of bikes with drilled holes, and washers are suggested for tight fixing.
• Buy with Confidence: You can buy with confidence because we want your 100% satisfaction. If the bike water bottle cages do not meet your expectations, please do not hesitate to contact us.

User questions & answers

Question:	What is it made of
Answer:	Aluminum alloy. Flexible but sturdy.
Question:	How far apart are the screws on this water bottle holder
Answer:	It is about 7cm.
Question:	How easy is this to install
Answer:	Including necessary mounting fittings, it only needs almost 5 minutes to be installed.
Question:	What size level can it hold
Answer:	Fits most standard size water bottles which diameters ranging from 2.84 to 3.54 inches (72-90 mm).

Product features

Fashion Design and Durable Quality

Our water bottle cage comes with 2 screws and an install wrench. Frosted surface and smooth edges will reduce scratch. It provides a secure and firm hold so you don't have to worry about it falling out during your ride.

Fantastic Design and Finish

The water bottle cage made of high quality Alloy Aluminum. Frosted surface and smooth edges will reduce scratch.

Lightweight and Portable

The bike holder only weights about 29 grams. It is easy to carry on and clean.

Fits Most Standard Size Water Bottles

This Water Bottle Cages are made to fit any water bottle in standard size. The integrated flexible design can accommodate most kettles with diameters ranging from 2.84 to 3.54 inches (72-90 mm).

• Lightweight:20g/pcs.
• Material:Aluminum alloy bike water bottle holder and steel bolts.
• Suitable for most bike bottle,suitable for most MTB and road bike.
• Easy to used.
• Works perfect on MTB and Road Bikes.

User questions & answers

Question:	How do I install this on my child’s bike? Do I need to drill holes
Answer:	The vike should have threaded holes for it. If not, you can buy an universal adapter for it. Worst case, drill goles and install rivet nuts.
Question:	what is the max dia bottle that will fit
Answer:	Regular water bottles are quite snug so whatever their diameter is almost the max
Question:	Would it fit a kid’s bike
Answer:	The question is do yo have threaded receivers on the bike. THere are no straps Great color by the way

• ✔ HIGH QUALITY：ROCK BROS bike water bottle cage is made of heat-treated and strong aluminum alloy material, with a smooth surface, rust-proof, durable, sturdy and lightweight, and non-deformation, which is the perfect cycling gear for your outdoor riding adventures
• ✔ UNIVERSAL FITS: One-piece bottle cage design ensure its security and harmonize, flexible metallic material makes size adjustable easily, fits most standard & oversized bikes & water bottles, including the following sizes: 20, 21, 25, 24, 25 & 33 oz (500, 550, 650, 750 & 950 ml)
• ✔SECURE & STURDY: The bicycle water bottle holder has arms that wrap around the bottle ensures it stays in place firmly and securely whether you're out riding fast on roads or bumpy trails
• ✔ QUICK & EASY TO INSTALL: Our cycling bottle cage comes with 2 stainless steel bolts and a 4mm hexagon wrench to fasten cages in screw holes on the frame, mount on your bike frame in under 1 minute. The bike frame requires threaded holes to install the cage
• ✔SPECIAL DESIGN: The bike cup holder at only 23g/ 0.8oz, lightweight and nice-looking, 4 different gradient colors can be chosen as you like, make your cycling journey no longer monotonous

• 2x Pack Includes - Pack of 2 Aduro Sport Cycle H2O Universal Bicycle Bottle Holders, 1 Allen Key, 4 Bolts
• Universal - Fits most standard & oversized bikes & water bottles while keeping the bottle firm in cage during fast riding & bumpy trails
• Easy Installation - 1, 2, 3 Simple installation after which provides you quick & easy access to your water bottle at all times
• Expandable Base - Adjustable and sleek design guarantees a firm fit making it great for road, mountain, hybrid, touring & electric bicycles
• Covered by Aduro Lifetime 100% Satisfaction Guarantee - These Water Bottle Holders are designed to last for years! If you have any issues at all, simply let us know. We'll either replace them at no cost or issue a full refund!

User questions & answers

Question:	Why have these bottle-cages >doubled-in-price since last december 2019...? i bought the same pair for $10 last december
Answer:	The military is buying them all up for unmanned drones in preparation for WW3
Question:	Will this hold a polar 24oz bottle
Answer:	Yes, easily. It depends on where it is mounted on the frame. The 24 oz bottles are tall.
Question:	Does anyone know the actual weight of this bottle cage in grams
Answer:	I remember my concerns about mass of components from my racing days (early 1970s). Some cyclists would actually drill out chain rings and flute their seat posts in order to loose a few extra grams! From the laws of physics, the important mass to be concerned about is accelerating the mass at the end of the spinning discs (the tires and rims). It takes more muscle energy to accelerate spinning mass than any static mass on the frame (F=MA and "a body at rest tends to stay at rest"). Having pointed that out, the cage is made from lightweight aluminum. I have not weighed it, but It is just massive enough to hold a water bottle in place without failure; the bottle, which when filled, has even more mass than the cage holding it. You can always do away with the cage and put the bottle in the back pocket of your jersey. ;-D
Question:	Can these hold glass water bottles
Answer:	These work great with 20 oz plastic bottles that are used for Gatorade. The cage can be bent in or out a bit to provide just the right squeeze to hold the bottle and not rattle. And they will fit bottles specifically made for bikes, sold at most sports shops. The Gatorade bottle is a more economical choice, and sports top bottles are available too. I think a metal, or a glass bottle would rattle in an annoying way, so I wouldn't think to try that. As for glass, if it drops, you now have broken glass where you and others will ride. Not so great for the tires, and you wont have water for the rest of that ride. If you go with a glass or metal bottle, a bit of cloth tape wrapped around the parts of the cage that make contact with the bottle might reduce any rattle.

Product features

Aduro Sport Bicycle Bike Bottle Holder

Aduro Sport brings the best accessories to motivate people to pursue a truly active lifestyle. Whether it’s running, climbing, hiking, biking, skiing, swimming, or ripping around the country-side on a motorcycle, we have you covered. We want you to exercise that wanderlust, to go out and explore, knowing that you will have reliable merchandise, with a brand you can trust, to fall back on. We’ve produced a great line-up to aide amateurs and professionals alike in their favorite activities

Aduro Sport Bicycle Bike Bottle Holder

• Durable & Lightweight: The 50 Strong water bottle holder is designed of lightweight, durable plastic and is easy to install. Just mount on your bike's frame using your existing screws and pop in your favorite bottle before you start riding. Great for road, mountain, hybrid, touring, triathlon and electric bicycles and will securely grip your drinks. This listing is for two bike cages. (Screws are NOT included)
• Fits Most Standard Sized Water Bottles: This light weight cycling cage is designed to fit most brands of bike water bottles. Specially designed by a cyclist, it allows you access to your water bottle while you ride. Attach both cages to your bike for maximum hydration. Available in multiple colors including black, green, blue, red, pink, and white.
• High Quality Material: Our bike cage is manufactured from premium plastic so that it holds up to any bumps in the road and your endless hours of scenic rides. This bike cage will hold your bottles so that you can stay hydrated on both road and trail rides.
• Made in the USA: This bike water bottle holder is proudly manufactured in America.
• Easy to Install: The 50 Strong bike cage is easy and quick to install on your bike.

User questions & answers

Question:	In your experience, what is the best-fitting reusable water bottle for these
Answer:	I holds a 1.5L Nalgene water bottle, which is about 3.3lbs. Four pounds would probably be okay, but most eBike batteries weigh considerably more.
Question:	Will this fit a bottle with a diameter of 3.75 inches
Answer:	Max spacing of existing drilled holes is 3.75 inches. However - overall length of drilled surface is 6.75 inches. So there is room enough to drill another hole in the bracket or consider adding a Wolf Tooth B-RAD 3 or 4.
Question:	Will this hold a bottle that is 3.25 inches in diameter
Answer:	Right!? Lol. You must’ve read the “frequently purchased together”. Which clearly they are not.
Question:	can it hold a camel back 750ML bottle
Answer:	This is a great product for bikepacking. The cage has slots so it can match various spacing of water bottle cage bolt bosses. It does not come with screws. We use these on the areas where there are bike cage mounts as well as other areas (forks ) using an adapter like Two Fish velcro mounts and other adapters. It is fairly large so will hold bags, bottles, maybe even a Growler. Enjoy

Product features

50 Strong is your source for all of your cycling hydration needs! Check out our full line of American-made cycling accessories and water bottles.

Premium Bike Water Bottle Holder

The 50 Strong water bottle holder is designed of lightweight, durable plastic and is easy to install. Just mount on your bike's frame using your existing screws and pop in your favorite bottle before you start riding. Great for road, mountain, hybrid, touring, triathlon and electric bicycles and will securely grip your drinks. This listing is for two bike cages. (Screws are NOT included)