14 best topeak bicycle parts

Product description

Upgrade any pump to the TwinHead pump head. Includes extra long hose and mounting hardware. Fits Presta / Schrader / Dunlop valves.

• Dual head adjusts to presta/Schrader
• Weighs 160-Grams

User questions & answers

Question:	I have a hurricane pump purchased at performance bike. the valve head leaks. can i upgrade upgrade using topeak twinhead bicycle floor pump upgrade
Answer:	All bikes being equal I believe that this tool will work on all bikes. I have an older Trek bike and it works perfectly.
Question:	how wide is the pump head - just the head part. need to use in a tight area
Answer:	Yes there is some resistance to keep the allen wrenches in place. The knife, screw driver and box wrenches lock in place when fully extended. I highly recommend this excellent tool.
Question:	Is this just the head or the hose as well
Answer:	No, it doesn't bend under normal use.
Question:	Does this head work with the Joe Blow Pro (which came with The Smarthead
Answer:	just look at the Topeak website, it has all the detailed specs you will need, and it's very easy to find:Tools26 total Allen Wrenches2-L/2.5/3/4/5/6/8/10mm Torx® WrenchT25 Box Wrenches8/9/10mm 2 each Spoke Wrenches15g/14g Chain ToolCast Cromoly Steel Chain HookStainless Steel Wire Tire LeversTwo Integrated In Body Screw Drivers#2 Phillips & Flat Head KnifeStainless Steel Bottle OpenerHardened Steel CompartmentsFor Two Chain Pins Pedal WrenchMini (For Field Repairs) Tool MaterialHardened Steel BodyEngineering Grade Plastic Bag MaterialHD Nylon Size (L x W x H)8.6 x 4.3 x 4.1 cm 3.4" x 1.7" x 1.6" Weight290 g / 10.21 oz Art.no.TT2353

• 600 Denier Polyester
• Imported
• Expandable bike bag with divided main compartment and expandable top
• 2 side panels with expandable panniers add even more storage space
• 600-denier polyester construction with rigid molded side panels
• Shoulder strap for easy carrying; RedLite clip and elastic top bungees
• 1,380 cubic inches of storage; measures 14.5 x 8.5 x 9.8 inches (W x H x D)

User questions & answers

Question:	Which bike rack do I need for this trunk bag? The tourist or explorer
Answer:	Measure the guitar, then match it up to the specs. Don't know about that guitar specifically, but it fits the Yamaha dreadnought perfeclty.
Question:	Will my laptop fit in the side panniers? (16.5 long x 10.5 wide
Answer:	The measurements for the case are in the description. Just measure your guitar. Mine fit perfectly
Question:	What is the difference between sizes? Is one for a 26" and the other for a
Answer:	Not known
Question:	what's difference between DXP and EXP? Size? Space
Answer:	Hello,This should help you figure it out:Interior Dimensions Body Length: 18.00 " Body Height: 3.25 " Lower Bout Width: 13.00 " Middle Bout Width: 13.00 " Upper Bout Width: 13.00 " Overall Length: 36.50 "- See more at: http://www.gatorcases.com/p/16136-768/gwe-elec-wide#sthash.0hPuEdXZ.dpuf

Product description

Upgrade any existing pump to the SmartHead pump head. Includes extra long hose and mounting hardware.

Upgrade any existing bicycle pump by adding this SmartHead kit, which replaces your old or worn-out pump hose and head. SmartHead technology ensures that the adapter will work on both Presta and Schrader valves without requiring you to change any parts or buy two separate adapters. Plus, it's easy to install, with an aluminum thumb-lock lever that creates an airtight seal over the valve. The SmartHead measures 41.7 by 1.1 by 1.9 inches and 0.3 pounds.

• HEAD - SmartHead Fits Presta / Schrader valves
• WEIGHT - 140 g / 4.93 oz
• SIZE - 106.5 x 5 x 2.9 cm / 41.7” x 1.9” x 1.1”
• Upgrade your bike floor pump

User questions & answers

Question:	What is the thread size? I have to replace a hose that has a 5/16 inch thread size
Answer:	This hose head is the push-on type. Thread size shouldn't matter. It works with both Presta and Schrader valves.
Question:	I have a Bontrager Charger floor pump and the head blew out. Will this replacement fit? The picture suggests it comes with hose adapters
Answer:	Works great with Bontranger Charger. None of the included adapters were needed. Unscrew the plastic boot at the base of the old hose, and pull the hose off. On the new hose, unscrew its boot from the adapter plug that comes installed on it and pull out the adapter plug. Push the new hose onto the pump, and screw on the new plastic boot. Perfect fit.
Question:	I have a hurricane pump purchased at performance bike. the valve head leaks. can i upgrade upgrade using topeak smarthead
Answer:	The SmartHead hose diameters are: 27/64 O.D. 5/32 I.D. I just used my old connector and cut the old hose off. It fit fine (I have a Topeak Joe Blow, not your pump). I believe the kit comes with a few adaptors, so I expect you can make it work. The smarthead is great...much better than what my pump came with. You won't be sorry. Cheers, Gary
Question:	Would like to use it on the Astro 3018 Digital Tire Inflator It has a 3/8" male hose. Anyway to do that
Answer:	I had a fit issue on my Silca Floor Pump. I bought the Topeak Smarthead and their hose and connected it using a brass Universal Pipe Thread reducer at the pump with a small hose clamp. I thought it might blow off someday, but it's still holding after five years.

Product description

Fits 26", 27.5"(650B) & 700C Wheels w/ Disc Brakes Our toughest tubular aluminum rear rack designed for heavy-duty, long distance touring. Specifically developed for bikes equipped with disc brakes. Integrated side bar provides a lower pannier attachment point-allowing more space for cargo on the rack top. QuickTrack® compatible for use with any MTX TrunkBag, rear basket and pannier bag.

The Super Tourist is a classic loaded touring rack for road bikes designed for compatibility with disc brakes. 6061-T6 aluminum construction with 6061-T6 aluminum bracket, hollow aluminum tubes, and stainless steel hardware makes it strong and lightweight while the integrated top fender offers splash protection. The QuickTrack mounting system is compatible with Topeak MTX trunk bags and MTX rear baskets and the rack fits all frames with disc brakes. Includes all mounting hardware.

Topeak's QuickTrack system makes mounting any QuickTrack equipped bag or basket to a Topeak rear rack incredibly easy. Simply line up the composite QuickTrack base with the channels on any Topeak rear rack and slide forward until it clicks into place--there are no tools, no straps, and no hassles. To remove, simply push the yellow release button and slide the bag or basket rearward until completely disengaged.

Features:

• Fits all frames with disc brakes
• Braze-on type attachments
• RX QuickTrack system compatible
• Includes all mounting hardware
• Precision welding at all critical support points
• Solid fender top
• RedLite mount
• Tail light mount
• Made of strong and lightweight hollow 6061 T-6 aluminum

Specifications:

• Weight Capacity: 55 pounds
• Size 13.4 by 9.3 by 16.1 inches (L x W x H)
• Weight: 1.63 pounds

• Fits all road frames with disc brakes
• Braze-on type attachments; weight capacity of 55 pounds
• RX QuickTrack system compatible
• Precision welding at all critical support points
• Made of strong and lightweight hollow 6061 T-6 aluminum

User questions & answers

Question:	Will this rack fit a 2018 Giant Roam 3 disc (large frame
Answer:	I use the case for my Yamaha axp-a4 with a little length space left. The case has a max depth of 4.5" and a max body width of 15" and a max body length of 19.75". The max neck width is 4" and a max head width of 5" and an overall length of 42".
Question:	How to use rear light clip plastic mount when plastic Topeak pieces don't have screw threads
Answer:	This case is designed for a thin body guitar. Body must be less than 4 inches thick.
Question:	Will this fit a bpm f
Answer:	Hello, Well the way I figured it out for my Yamaha Dreadknot was carefully measure the guitar and read the instructions on the case. Maybe you'll get lucky the first time. Sorry I can't give you more info on fit. Play on and enjoy !
Question:	Will the lower bar of the rack accommodate/fit panniers with Rixen & Kaul lock system
Answer:	I believe it will. The description says it fits all models CG

Product features

Topeak Super Tourist Tubular Bicycle Rack DX with Side Bar for Disc Brake Bikes

Fits 26", 27.5"(650B) & 700C Wheels w/ Disc Brakes

Our toughest tubular aluminum rear rack designed for heavy-duty, long distance touring. Specifically developed for bikes equipped with disc brakes. Integrated side bar provides a lower pannier attachment point-allowing more space for cargo on the rack top. QuickTrack compatible for use with any MTX TrunkBag, rear basket and pannier bag.

Product description

Topeak BabySeat II is a wrap-around seat structure that creates a virtual cocoon of protection and features an updated shoulder harness with a multiple height adjustment system. It is equipped with an innovative suspension system that cushions bumps and jolts. The integrated roll bar provides extra head protection and doubles as a carrying handle. This seat also features an adjustable footrests and straps that keep small feet away from spinning wheels. This child seat complies with stringent European, CPSIA and Proposition 65 safety standards.

Included Mount Rack

The included heavy-duty disc mount rack features an innovative BabySeat attachment that requires no tools to attach and remove seat from rack. Once the seat is removed, the exposed QuickTrack system is compatible with all Topeak MTX TrunkBags and MTX Rear Baskets.

Bundle Includes:

• Topeak BabySeat II with Disc Mount Bike Rack for 26-Inch Wheel (Yellow Seat Pad)
• Topeak RedLite II Bike Safety Light (Black)

• BUNDLE INCLUDES: Topeak BabySeat II with Disc Mount Bike Rack for 26-Inch Wheel (Yellow Seat Pad) and Topeak RedLite II Bike Safety Light (Black)
• INNOVATIVE SUSPENSION SYSTEM: It is equipped with an innovative suspension system that cushions bumps and jolts
• INTEGRATED ROLL BAR: The integrated roll bar provides extra head protection and doubles as a carrying handle
• ADJUSTABLE FOOTRESTS AND STRAPS: This seat also features an adjustable footrests and straps that keep small feet away from spinning wheels
• INCLUDED MOUNT RACK: The included heavy-duty disc mount rack features an innovative BabySeat attachment that requires no tools to attach and remove seat from rack

User questions & answers

Question:	I have a Topeak bike rack already, will this bike seat work on that rack or does it need a special Topeak child rack
Answer:	This case is made for the APX Thinline series. Don't buy it if you don't have a small guitar.Int Overall Length 41.25"Int Body Length 20"Int Body Depth 5.5"Int Lower Bout Width 15"Int Upper Bout Width 11.5"Exterior Length 43"Exterior Width 15.5"Exterior Depth 6"
Question:	Does this fit a Giant Talon 27.5 mountain bike
Answer:	I use this case for my APX guitar.
Question:	Does light mount to back of baby seat
Answer:	This case is designed for the APX series.
Question:	Does this work with a beach cruiser
Answer:	Concert size: Interior Overall Length 41", Interior Body Length 23.3", Interior Body Depth 4.8" Thinline : Interior Overall Length 41.5", Interior Body Length 22.9", Interior Body Depth 3.8"

• Used by both professional and amateur riders alike
• Made using high quality materials and components
• Tested to ensure quality and durability
• Max Load - 7.5 kg / 16.5 lb
• 1600 g / 3.53 lbs
• Welded Metal Wire
• 23.44 l / 1430 ci Capacity

User questions & answers

Question:	what are the simensions
Answer:	I have not yet tried the train popper on this tool but I have a lot of experience with bikes and bike chains and just to answer this question I gauged it with my micrometer and it is 3.25 mm I think that that is mostly a standard size for BMX 21 speed and mountain bike sizes those are our gear sets with different size chain links and sometimes me use a smaller pin but usually only with custom bikes or custom gear sets which you probably know if you had a custom chain I think they should cover most basic bicycle chains maybe even a motorcycle but that might exceed the torque abilities of this tool so yes this should most likely in most cases fit your 21 speed chain
Question:	Does it fit any topeak rear rack
Answer:	no
Question:	What is maximum dog weight for this basket
Answer:	Unfortunately, probably not. Besides my APX500 steel string, it fits a Takamine EG128 (barely) acoustic/electric classical. Both these guitars are thinner and not as wide in the body. I started with a C40 decades ago, and if memory serves me, it is wider and thicker. I hope you like your guitar! ciao.
Question:	How can you mount it on a non-Topeak bike rack
Answer:	I use mine for an Apx 500, and do no know if a 700ii or 700 could also use this case.

Product features

Carries groceries, books and more!

Keep your goods secure in transit with this high quality basket. The MTX QuickTrack system allows quick and easy removal from your bike. Just flip up the handle and do your shopping. When you return just click and go!

COMPARTMENT One divided

CAPACITY 23.44 L / 1430 ci

MATERIAL Welded Metal Wire

ATTACHMENT MTX QuickTrack System (Fixer 6)

MAX LOAD 7.5 kg / 16.5 lb

ADDED FEATURES Carry Handle, Optional Cargo Net

SIZE 40.5 x 33.5 x 24.1 cm / 15.9” x 13.2” x 9.5”

Product description

Topeak Explorer Rear Mount Rack features an integrated top plate for quick-mount Topeak MTX and RX Quick Track trunk bags. Features: Size (LxWxH): 13.4" x 5.6" x 16.3" One size fits all frames Tough 6061 T6 aluminum construction with 6061 T6 aluminum fitting bracket Hollow tube O/D 10.2mm Integrated top plate for quick-mount Topeak MTX and RX Quick Track trunk bags Integrated fender top

• Wt. 640 g / 1.41 lbs
• Braze-On Type
• 6061 T-6 Hollow Aluminum
• MTX QuickTrack Series
• Max. Weight Capacity 25 kgs / 55 lbs

User questions & answers

Question:	Can this be mounted to a bike with out disc brakes
Answer:	This is more for tightening bolts to a specific torque. Look for bike wrench tool rather than a torque tool. I have been happy with this purchase: https://www.amazon.com/gp/product/B00CW90ZIE/ref=ppx_yo_dt_b_asin_title_o07_s02?ie=UTF8&psc=1 A cheaper alternative is a bike multi-tool.
Question:	Where does a mtx quicktrack compatible cargo basket attach? will it clip on to the spring or to the main part of the rack
Answer:	Yes. 1/4 inch hex bits.
Question:	Will this rak fits a disk brake bicycle
Answer:	The wrench has three settings of 4, 5, and 6 Nm max torque which you set with a 5 mm allen key. When tightening a hex bolt with this torque key, the key "clicks" when the chosen max torque is met and does not allow you to tighten the bolt any further. I suppose you could call these clicks "half 'clicks'".
Question:	What does the term "without springs" refer to
Answer:	4,5 and 6 nm is the range.

• New 3" mid-mount gauge
• New hammer style TwinHead DX with extra long 360 pivot hose works with all tire valves
• Max pressure: 160 psi/11 bar
• Includes ball and bladder needles
• Dual density polymer, ergonomic, oversized handle

User questions & answers

Question:	Sirve para tubeless MTB
Answer:	No sirve para tubless ya que si el caucho está vacío no genera el suficiente volumen de aire para sellarlo al rin
Question:	Soporta range rover sport 2010 peso aproximado del vehículo 1900 Kg
Answer:	No,para eso estan las electronics para carros
Question:	Where is this pump made? What country
Answer:	Chin
Question:	Mine has no “charge/inflate” switch and there’s nothing on the packaging about it. Does anyone else have this feature that’s in the description
Answer:	They put the description for a different model.

Product features

JoeBlow Sport III

The JoeBlow Sport III continues the tradition of setting the benchmark for floor pump durability and performance, while ushering in upgrades with an enlarged 3” chronograph-inspired gauge and new hammer style TwinHead DX pump head. A durable steel barrel and base as well as ergonomic padded handle make inflating tires a breeze.

Volume Per Stroke: 318 Cc

Barrel: Painted steel

Base: Hardened steel

Size: 29.1” X 9.8” X 7.3”

Weight: 3.7 lbs

Art#: TJB-S6

• Used by both professional and amateur riders alike
• Made using high quality materials and components
• Tested to ensure quality and durability
• Head Smart Head/Gauge Digital - PSI, Bar, kg/cm2
• Battery CR2032 x 1 (included)
• Capacity Reads 250 psi/17 bar
• Size (L x W x H) 10.2 x 4.5 x 3.5 cm/4" x 1.8" x 1.4"

User questions & answers

Question:	Does this work correctly with presta valves? i know the description says so, but other gauges also claim that and do not perform well with them
Answer:	I found that removing the spring from the nozzle makes this very easy (i.e. no leakage) to use with presta valves. It also still works on Schrader valves without the spring.
Question:	How big is this? Is it small enough to fit comfortably in a seatpack on a road bike
Answer:	Don't buy a gauge that goes up to 60 if you need to measure less than 5. That's just common sense. If you need to measure 3-5 psi, buy an 8-10 psi gauge, which sounds like a specialty tool.
Question:	How does the air release reading work on this?! i press the release button and air is escaping but the psi doesn't lower on the readout
Answer:	Contact Joes Racing to obtain a Spec & Data Sheet. 1-877-267-1525. Best,
Question:	Will this work on Presta and Shrader valves
Answer:	I think it is +/- 3% of full scale deflection. So on a 60 PSI max Gauge it would be +/- 1.8 PSI throughout the entire scale. Besides being able to read the gauge more accurately and buy one in the range your working with like for me its regular car tires so 60 PSI is best and the dial has 1 PSI markings if you get a 120 PSI Gauge with 2 PSI markings 3% of that is now +/- 3.6 PSI which is not good for standard tire measurements which are in the 30 PSI range. Overkill is not good with gauges

Product features

SmartGauge D2

The SmartGauge D2 is an precision, lightweight, all-purpose air pressure gauge. Packed with features, it is an essential tool whether you are fine-tuning the pressure on your tires, your suspension, or just to keep in the glove box of your car for when you need it.

Body: Engineering grade plastic

Size: 4"x1.8"x1.4"

Weight: 65 gr

ART#: TSG-02

Product description

You donAAAt have to guess tire pressure with the Topeak Road Morph G Mini Pump thanks to a flip-out analog gauge that reads up to 140psi. Now you can say goodbye to startling explosions or frequent stops to add more air. Lightweight and durable butted aluminum construction ensures the Morph G survives a skip across the tarmac after you drop it out of your back pocket at 30mph.



Product Features

• Material: , plastic
• Dimensions:
• Valve Type:
• Max Pressure:
• Hose Length:
• Deflate:
• Weight: 220 g
• Recommended Use: road cycling, MTB
• Manufacturer Warranty:

• Used by both professional and amateur riders alike
• Made using high quality materials and components
• Tested to ensure quality and durability
• HEAD Fits Presta/Schrader/Dunlop valves
• GAUGE In-line gauge, Reads 140 psi/9.6 bar
• HANDLE T-type dual density polymer
• ADDED FEATURES Fold-out foot pad, Flexible hose Includes centerline mount bracket (Art No. TRP-3C)

User questions & answers

Question:	Does it come with a mount that attaches to the waterbottle fittings but places the pump to the side so I can still mount a bottle cage
Answer:	It comes with ties to place it anywhere as well as screws to the waterbottle fittings. You could use the ties to place it offset of the water bottle with no issues
Question:	Where was it made
Answer:	Taiwan
Question:	what is the length
Answer:	Overall length is 13 3/4 " (35 cm)
Question:	How does the pump mount on the bike
Answer:	Pump comes with a clip-on mount that attaches to any tube on the bike with two heavy duty cable ties (included). I carry mine on the seat tube right beside the rear water bottle. It can also be screw-mounted using either of the water bottle locations. A Velcro strap provides backup for the spring clip.

Product features

ROAD MORPH G

Morph technology in a road pump. Extra long barrel gives huge performance. Includes in-line gauge for perfect inflation every time.

In-line Gauge

Reads 140 psi / 9.6 bar

T-handle

Dual density polymer

Fold-Out Foot Pad

Flexible Hose

HEAD Fits Presta / Schrader / Dunlop valves

SIZE 35 x 5.7 x 2.8 cm / 13.8” x 2.2” x 1.1”

WEIGHT 220 g / 7.74 oz

Product description

Sleek, aero shape wedge pack for carrying tools, food, wallet, keys, maps, spare tubes, mini pump, and anything else you need to carry. Aerodynamic styling with traditional strap mount. 3M reflective strip for increased nighttime visibility.

• Used by both professional and amateur riders alike
• Made using high quality materials and components
• Tested to ensure quality and durability
• Nylon straps / Buckle
• Large openings swallow up all the things you take on your ride.
• 1200 denier nylon with coating for water and stain resistance
• 3M Reflective Strip, RedLite Clip

User questions & answers

Question:	Will iPhone 11 fit in a small
Answer:	Yes.....it can handle a crank bolt; however I would buy a separate wrench for cranks. You can channel more torque with you hands with a conventional torque wrench.
Question:	Does the small bag expand like the medium and large bag
Answer:	Don't rightly know but it a very good quality tool. Well made and very handy. Doesn't feel cheap like a lot of knock off crap.
Question:	Can I fit the the ratchet rocket dx tools with the small or should I get the medium to be sure
Answer:	Don't know for sure, it works with my Specialized Mountain Bike ( 10 in one) and my Trek Hybrid (21 speed).I'm not familiar with a 1/8th chain. Sorry, this may not help....
Question:	does an I phone fit into the small Topeak Aero
Answer:	From the Crank Brothers web page hex wrenches #2, 2.5, 3, 4, 5, 6, 8 length 89mm screwdrivers Phillips #2, flat #2 torx t-25

Product features

Expands

Medium & large expand to add 20-30% more volume

Light Clip

Features a light clip for extra safety

Large Opening

Large openings swallow up all of your gear

Reflective Strip

3M reflective strip adds safety at night

Product description

For MTX TrunkBag DXP, MTX TrunkBag EXP and TrunkBag DXP (Strap Type) Provides additional protection from the elements so your TrunkBag and contents stay dry and clean.

• Country Of Origin : China
• The Package Height Of The Product Is 4.57 Centimeters
• The Package Length Of The Product Is 25.15 Centimeters
• The Package Width Of The Product Is 10.67 Centimeters

User questions & answers

Question:	Is this part # TRC
Answer:	I got the explorer Topeak bike rack. This bag fits perfectly on the rack.
Question:	Is it constructed of true reflective fabric that will illuminate when light is directed toward it at night
Answer:	Supporting D. Cobb's, "No," answer: My 15.25 x 10.25 x 1" laptop barely allows the DXP's side bag to zip shut, and that's if I drag and stretch the zipper gently. 16.5' would not zip shut.
Question:	Can you please tell the materials of the cover, nylon (only), or cloth
Answer:	I don't think that it makes a difference. With the side panniers all the way extended it ought to fit on either size bicycle. As long as it fits your rack, you're good to go. I have 700cc wheels on my bicycle.
Question:	If you're not using the panniers, can that part of the cover be folded up (or not open to begin with) and put away
Answer:	The size difference is marginal. The top portion of the d.x.p will expand upward plus it has the rigid side panels and a rear bottle holder. It all depends on your usage.

Product features

RAIN COVER

For MTX TrunkBag DXP, MTX TrunkBag EXP and TrunkBag DXP (Strap Type) Provides additional protection from the elements so your TrunkBag and contents stay dry and clean.

Product description

Topeak created the Ratchet Rocket Lite DX as a nifty little package for tightening loose bolts and components on your bike and even common household items. It comes packaged in a nice little nylon case, which is easily stored in your garage workspace or even carried in a pack when you need tools close at hand. The fine tooth ratchet mechanism features a reverse lever and thumb wheel for controlling it in those tight, hard-to-reach locations. This kit includes hardened steel bits for years of longevity on your favorite bike. Specifically, you'll find 2, 2. 5, 3, 4, 5, 6, and 8 millimeter allen bits, T10 and T25 Torx bits, and #2 Phillips screwdriver, as well as two plastic tire levers and magnetic bit holder.

• Fine tooth ratchet mechanism with reverse lever and thumb wheel
• 2/2.5/3/4/5/6/8mm allen wrenches and T10,T25 Torx #2 Phillips screwdriver, 2 tire levers
• Leverage added magnetic bit holder and patch compartment

User questions & answers

Question:	What kind of metal is the ratchet made from
Answer:	If the seat stay has the appropriate holes - I do not see why not.
Question:	what is the size of the pouch
Answer:	I can't help with your specific question. I didn't use the topeak hardware for the light. I use aftermarket lights that use the rubber strap and they work perfect for wrapping around the metal tab where you attach your light.
Question:	What is the exact weight of this item
Answer:	I don't know about particular bikes, but it should if your bike has disk brakes.
Question:	What is the tooth count on the ratchet and how much slop does it have? (ie. how far before it clicks the first time
Answer:	Yes. It works very well. I used this rack on my '9er with Axiom bags, and now have it on my TerraTrike (modified for 26" wheel and seat-back) using the same bags. It's a very sturdy rack.Thanks for asking. This is a good price plus it's a Prime item. I may order another.

Product features

RATCHET ROCKET LITE DX

Features a fine tooth ratchet mechanism with reverse lever and thumb wheel for quick rotation and control in tight spots and includes hardened steel tools in 2, 2.5, 3, 4, 5, 6 and 8 mm hex, T10, T15, T25 Torx and #2 Phillips bits, two engineering grade polymer tire levers and magnetic bit holder.

Compatible

Ratchet driver is compatible with Topeak TorqBits

Added T15 Torx bit for installing Ninja accessory on Tri-Cage series with ease

Reversing Ratchet

Reversing ratchet with thumb wheel action

Magnetic Holder

Magnetic holder secures bits and adds leverage

Protective Case

Protective case keeps things organized and secure

Product description

For M / L Size Frames For MTB or heavy commuting use. QR mechanism is secure and easy to use. 9 kg (20 lb) carrying capacity. Compatible with all MTX TrunkBags. Includes two rubber bungees and safety reflector

• CLAMP - Fits 25.4 - 31.8 mm (shims Incl.)
• BAG COMPATIBILITY - MTX TrunkBags, Topeak
• MAX WEIGHT CAPACITY - 9 kg / 20 lb
• ADDED FEATURES - Rubber bungee, Safety reflector RedLite Mount, Tail Light Mount
• MATERIAL - Aluminum beam
• WEIGHT - 696 g / 1.54 lb
• SIZE - 51 x 12 x 11 cm / 20.1” x 4.7” x 4.3”

User questions & answers

Question:	Can the rack be leveled for different seat post angles
Answer:	Depends you have disc rack or non-disc rack.
Question:	will the topeak qr beam rack mtx bicycle rack (v type) fit the cube stereo hybrid 140 hpc
Answer:	My feeling is it will fit..
Question:	Will this be ok for the aventon sinch
Answer:	It has its own clip so you can clip it anywhere on the seat or the bike
Question:	What's the vertical height distance from bottom of rack platform to top of clamp? Accuracy is a virtue. Ignore if you don't know or have to guess
Answer:	Yes. I mounted one on a beach cruiser.

Product features

Compatible

Compatible with MTX TrunkBags

Quick Release

Features a quick release clamp mount

Reflector

Safety reflector is included

Secure

Integrated rubber bungee cord secures your cargo