14 best rear bike racks

• STURDY:This bike carrier rack is made of durable aluminum alloy,strong and well built bike rack for carrying lots of weight.
• QUICK RELEASE:Quick release mount at seat post.Easy to install and come with tools and installation instruction.
• LARGE LOAD:This carrier rack is made of quality aluminum alloy,lightweight,but carries up to 115 lbs
• W-SHAPED & ADJUSTABLE DESIGN:Design with W-shaped bars to prevent pannier from hitting the tires,keeps your pannier safe.The adjustable shelf and bottom rods,fits 18"-27.5" mountain bike type and road bike type.
• NOTE:Does NOT fit Suspension bike,Fat tire bike, Women's cruiser bike,Bike seat,ect.The included nuts are locking nuts.When you installed the nut,The rubber inside the nut will prevent you from tightening. Just use a tool to tighten nut.

User questions & answers

Question:	Will this fit onto my sixthreezero men's "in the barrel" 7 speed 26" cruiser
Answer:	I don't know if you can carry a dog that large in here by using the strap. I feel the dog would fit but the bag is pretty lightweight so it might be a pretty bumpy ride. I use the handles to carry my cats to keep the bag a bit more stable.
Question:	I have a mongoose 29” bike and i’m looking for a sturdy rack. will this fit
Answer:	Just bought this- I have a 4 month old and a 6 month old. I can cram them in there in a jam but unless they feel like super duper cuddling for a whole trip, they don't have much room together.
Question:	if i keep school bag on the carrier, how does it get fixed (i.e. not fall down while riding
Answer:	Yes I washed the entire carrier with laundry soap and poured a little cat urine remover in it. It washed great with no smell. The only thing I had to replace the wooden bottom. I wish the wooden bottom was hard plastic so it could be wiped down.
Question:	How many pounds can this support
Answer:	Yes. Most cats can "compact" themselves, or curl up. Mine fits in nicely and she likes it.

Product features

Requires 2"Height and 30mm Seat Post

The main bracket needs a height of 2" attached to the seat pole.If your seat pole is at the lowest height, please confirm that you are still suitable for riding after raising 2".

This rack fits seat post diameter of 30mm,if the clamp is too large for your seat post.You can cut the waste bike inner tire to increase the thickness of the seat post.

Adjustable Support Robs

Our rear bike rack have many adjustable designs and fits different sizes of bikes.

Support rods can be adjusted in length from 9.7"-14".The width of bicycle tires should not exceed 4.6".it fits fat bikes.

Bonus

Our rear bike rack comes with a bike cargo rack net.It's prefect when you want to carry small something like shcool bag,books,helmet etc.

Included

·1xBike Cargo Rack

·1x Reflector

·6xScrews

·6xRubber Pads

·2xInstallation tool

·1xInstall Instruction

·1xCargo Net

·1xStretchy Wire

Product description

The Ibera PakRak Touring Bicycle Carrier is frame-mounted for heavier top and side loads, carrying up to 25 kg (55 lbs).

It features a top plate that acts as a rear fender and splashguard, and seat stay rods that are length adjustable.

The rods can bend for a customized fit for bicycles that have higher or lower seat stay holes.

SPECIFICATIONS:

Material

Durable lightweight heat-treated aluminum

Features

This rack is compatible with Ibera trunk bags and planet-friendly reusable bags (IB-BA1, IB-BA14, IB-BA15, IB-BA18, IB-BA19) and Ibera panniers (IB-BA4, IB-BA9, IB-BA16, IB-BA20).

Also compatible with strap-attached bags and panniers.

Top plate acts as a rear fender and splashguard for wet conditions

Reflector adapter

Sleek, streamlined profile

For touring and carrying heavier loads.

Note: Please check bicycle to ensure that it has mounting holes on the rear dropout and seat stays.

Mount Type

Frame-mounted for heavier &top side loads

Quick-release bag mounting system (bags not included)

Dimensions

15" x 6" x 14"-15"

Adjustable height

Fits most 26" to 29" bicycle frames

Load weight

Carries up to 55 lbs (25 kg)

Rack weight

1.65 lbs / 750g

• Frame-mounted for heavier top & side Loads, carries up to 55 pounds
• Ibera parka quick-release bag mounting system
• Adjustable height, fits most 26"-29" Frames
• Top fender board splashguard for wet conditions; durable lightweight aluminum, only 1.65 pounds
• Can be mounted with Ibera trunk bags (IB-BA11, IB-BA14, IB-BA15, IB-BA22) OR strap-attached bags and panniers.

User questions & answers

Question:	Does this come with assembly instructions and/or pictures
Answer:	It works well for my Jeep but your Chevy might be a little to heavy.
Question:	Hi, will this rack fit a Trek 820 13" boys bike, thanks
Answer:	I used it to tow a 93 full size bronco and I just drilled holes in the bumper and bolted it to the tow bar
Question:	Will this work for mounting a toddler seat
Answer:	Best to do this is to remove the bumper. You should have space to bolt it
Question:	Will this fit for a 700c bike
Answer:	Large

Product features

Ibera PakRak Touring Carrier

High Quality Materials

This carrier rack is made of durable TIG-welded, heat-treated, anodized aluminum. This material is usually used for the bicycle frames and components, so it is as strong as your bicycle. The high quality material and manufacturing process reinforces it for extra strength. Additionally, the anodized aluminum is corrosion resistance and able to retain dye. The total weight of this rack is about 1.65 lbs (750 g).

Well-Designed Features

The bottom rods are adjustable and the rack fits to bicycle frame between 26" and 29".

Load Weight

This rack carries up to 55 lbs (25 kg).

Bicycle Panniers Attached

Compatible Models:

Ibera: IB-BA4, IB-BA7, IB-BA9.

BV: BV-BA3-Pair, BV-BA104P.

(Please note most panniers will fit this rack).

Bicycle Trunk Bags Attached

Compatible Models:

Ibera: IB-BA1, IB-BA2, IB-BA3, IB-BK1.

BV: BV-BA2, BV-BA1.

(Please note trunk bags will fit this rack).

Bicycle Taillights Attached

Compatible Models:

BV: BV-L811.

(Please note most taillights will fit this rack).

• QUICK RELEASE CLAMP for easily mount on the seat post or take the rear bike rack off, you can change the seat height easily. Comes with tools and installation instruction. Fits most of bikes like the mountain bike but not fit the rear suspension bike, flat tire bike.
• FENDER under seat provide more protection for your bag or panniers in rainy day or mud road,keep your bicycle dryer and cleaner.You can also remove this rear fender when you don't need it. Fit for 26-29" mountain bike frames.
• SOLID&STURDY bike rear rack was made with high strength aluminum alloy material ,coupled with stainless steel screws to help you ride freely in rainy days or humid conditions. Two “W” shape side bars effectively protect your bag from scratching by the wheel or spokes and also protect people's safety.
• FUNCTIONAL: Upgrade loading system cargo rack can carry 110 lbs to 165 lbs, perfect for carring some stuff on your trip,work commute,even carry the people. The adjustable structure allows you adjust the rack lenth as you wanted and the telescopic rods can be stretched 3-15cm to fit your bike frames.
• BONUS GIFT: Rear Red Reflector increase visibility on the night cycling to ensure your night cycling safety. Elastic bungee cord can stretch around your carrier bag or gears for extra security while riding on rougher road.

User questions & answers

Question:	Will this fit the trek 7200 hybrid
Answer:	no
Question:	Will this work with the 26" hyper beach cruiser? My concern is the angle of the seat post
Answer:	I'm not quite sure. The angle of the seatpost shouldn't be much different then any other bike. Also the arms that go down on each side that connects to the lower part of the frame are adjustable. I could not see why it wouldn't fit.
Question:	Can it be used on carbon seat post and frame? Specialized cust care person recommends absolutely no clamping to any carbon parts
Answer:	Physically, don’t see why not... but don’t think its worth voiding your $$$$ bike’s warranty?? Your call. Amazon has some nice backpacks that don’t void warranties ;)
Question:	Does this fit on a road bike? I’m not sure what angle the rack will be
Answer:	Very versatile and will fit most all bikes. All you need is a seat post and a diamond framed bike. Strong too and will hold the weight

Product features

ROCKBROS Rear Bike Rack Bicycle Cargo Rack Aluminum

• Large Capacity - The maximum loading capacity up to 165 lbs.
• Compatibility - Can be used with panniers, backpack or baskets.
• Red Reflector - Increase visibility and ensure your safety while riding at night.
• Adjustable Structure - Allow you adjust the rear bike rack length as you like and adjust the length of supporting bars to fit your frame.
• Elastic bungee cord can stretch around your bags or gears for extra security while riding on rougher road.

Full Quick Release

QUICK RELEASE CLAMP for easily mount on the seat post or take the cargo rack off, you can change the seat height easily.

Rear Red Reflector

Comes with the red reflector increase visibility on the night cycling to ensure your night cycling safety.

Adjustable Fender

Fits most of bikes like the mountain bike, road bike (your seat post diameter need be under 32MM) but not fit the rear suspension bike.

W" Side Bars

Two wide side bars efficiently protect your panniers or bags from getting into the bike spokes or scratching by the wheels.

Adjustable Structure

The carrier rack panel and side support bar can be adjusted without tools, it can be easily to adjust fit different kind of bikes.

Fits Most Bikes

Fits most of bikes like the mountain bike, road bike (your seat post diameter need be under 32MM) but not fit the rear suspension bike.

• Light weight aluminum construction
• Full adjustable seat stay arms and struts
• Fits 26, 27, 700c bikes
• Rear reflector bracket included
• Holds up to 26 pounds

User questions & answers

Question:	How do you set it up
Answer:	You will need a metric allen wrench and adjustable wrench. Set you seat and post to the correct height then remove seat from the seat post. Clamp the rack with the appropriate plastic spacer to the seat post (not the bike frame). Tighten the allen screws until tight. Do not over tighten as you could break the screws then replace the seat. The rack, can still be moved if you push hard sideways on it but is very stable. I have used mine for a long time and have no problems with it.
Question:	What does this rack weigh
Answer:	I don't know. However this rack is sold at Walmart. If you have a Walmart near you, you can go to the fishing section and pick up a fish weighing scale then take it over to the cycling section and weigh the Schwinn rack with the scale. Then put the rack back and take scale back to the fishing section. Leave Wal-Mart and and buy the rack here on Amazon b/c it is cheaper.
Question:	what is the length and width of the rack
Answer:	width: 5,5"length: 16.375"
Question:	What is the length of this rack
Answer:	Sorry, I meant to include dimensions and forgot - I couldn't find them anywhere, either. The rack is about 16 1/2 inches long, from the mid-point of the clamp opening to the rear of the rack, measured horizontally. The rack platform itself is roughly 12 1/2 x 5 inches, and extends about 5 inches to the rear of the vertical centerline of the rear wheel in its mounted position on my bike.

• 🎁 Aluminum alloy material, Suitable for most bicycles, Such as road bike, mountain bike, fat bike, etc. (Kids' bike and Trek Verve can not be used ). Come with tools and installation instruction, Easy to install. The Rack body is adjustable in size
• 🎁 Shelf Length 55 cm, Width 14.5 cm; Panel Length 35.5 cm; Width 14.5 cm. (Seat Tube Diameter 2.2-3.3 cm / 0.85-1.3") adjustable for kinds of bikes. Easy to Mount.It is perfect for use with panniers, backpacks, baskets, and more!
• [UNPACK]:1 * Rack Body, 6 * Support Bar, 7 * Screws, 2 * Rubber Gasket, 2 * Form Gasket, 1 * Reflector, 1 * Install Instruction, 1 set *Installation tool ,1 * free Keychain (Gift) NOTE: Come with the installation tool if not received please contact us reissue
• 🎁 *30 DAY MONEY BACK GUARANTEE- All West Biking customers enjoy 30 Day Money Back Guarantee. Customers can return and get refunded in case the purchasing is not satisfied for any reason. You have no risk to try.

User questions & answers

Question:	How much does it weigh
Answer:	Yes
Question:	To be clear, my bike has a rear suspension shock so the seat post moves up & down as the bike travels over bumps. Will this rack work with that
Answer:	This type slides in chanals on the front of each wheel platform
Question:	Will this fit a fat bike with 26x4 tires, 50mm rims and an 18" frame
Answer:	There is a channel welded to the front of the wheel plates. these slide into it and have a bolt protruding from the dolly to keep it from sliding out.
Question:	will this fit a 29" fat tire bike
Answer:	I don’t see why not. All it does is to pull in the web. And licks it down..

Product features

WEST BIKING Cargo Rack - Enjoying Cycling Life

​Cycling,as a healthy and convenient form of transport, we believe cycling should be a regular part of most people's lives.That's why West Biking concentrates on creating innovative equipment for recreational, commuting, and touring cyclists.

Cargo Rack

Usually Design

Weight Test and Package Including

Durable alloy steel rack loads up to 110lb

Durable aluminum alloy bike carrier rack for long distance touring,it features a top plate that acts as a rear fender and splashguard.

Product description

Aluminum Alloy Bike Carrier Rack



Great Load Capacity

Durable and solid aluminum alloy would be used in producing a high quality bike rack for giving it a high weight capacity. Carries up to 110 lbs ( 50 kg ) could make mountain bikers or road bikers feel carefree since they can put most loads on the bicycle carrier rack.

Light & Strong

Thanks to adopting excellent material aluminum alloy to make the bike carrier, wall mounted bike rack is extremely lightweight and strong.

The weight of this bike accessories is just only 2.4 lbs ( 1.1 kg ). In other words, lightweight design make the bike rack become super portable which means that it is convenient for mountain or road bike lovers to mount it.

Quick Mount and Release

This bike rack adopts the design named quick release system so that bikers could mount and release the bike rack quickly and simply. Men and women just need some simple steps to mount or release the bike accessories.



Suitable for Multi Bikes:

Mountain bikes

V brake bikes

Disc brake bikes



Materials:

Aluminum alloy or iron

• ◆Design with high quality aluminum alloy or iron for your options and quick release. Fits V-brake and Disc brake bike, for many kinds of bike;
• ◆Weight capacity is up to 110lbs when every part is tightly installed; Shelf Length 22", Width 5.7"; Panel Length 14"; Width 6" ;
• ◆Seat Post' diameter should be 0.85-1.3" and donot have shock absorber;
• ◆Includes Red Rear Reflector Lamp and Elastic Cords, which can make you safer to riding at night and keep your luggage secure. With side protecting frame, your luggages are protected from scratching by the wheel or spokes;
• ◆Adjustable length suits for mountain bikes, V brake bikes, Disc brake bikes

User questions & answers

Question:	Will it fit fat tire bikes
Answer:	Most likely it will, it has a lot of adjust-ability to fit. Very well made.
Question:	My bike rack came with no instructions, how do I assemble it
Answer:	It is very poorly made and I did not like how it went together. I returned mine in-used.
Question:	Will this fit a cruiser bike
Answer:	Not mine.
Question:	Can it be used with disc brakes
Answer:	I don't know why not.

Product description

Carries up to 25 kg (55 lb), Reflector attachable, TIG-welded, heat-treated, anodized aluminum. Compatible with Ibera trunk bags, side Pannier bags and planet-friendly reusable bags (PakRak IB-BA9, IB-BA11, IB-BA14, IB-BA15, IB-BA16, IB-BA18, IB-BA19, IB-BA20).

Specifications:

Material

Durable lightweight heat-treated aluminum

Features

Plus+ allows Ibera trunk bags and planet-friendly reusable bags (IB-BA1, IB-BA14, IB-BA15, IB-BA18, IB-BA19) to be mounted with Ibera panniers simultaneously (IB-BA4, IB-BA9, IB-BA16, IB-BA20)

Also compatible with strap-attached bags and panniers.

Mount Type

Frame-mounted for heavier top and side loads

Quick-release bag mounting system (bags not included)

Dimensions

15.5" x 8.0" x 14-15"

Adjustable height

Fits most 26" and 700c frames

Load weight

Carries up to 55 lb (25kg)

Rack weight

1.70 lbs / 770g

• Frame-mounted for heavier top and side loads with disk mounts
• Quick-release bag mounting system
• Adjustable; fits most 26-Inch and 700c frames
• Durable, lightweight aluminum 760g.Plus allows IBERA bags to be mounted with IBERA panniers
• Bag Compatibility PakRak IB-BA9, IB-BA11, IB-BA14, IB-BA15, IB-BA16, IB-BA18, IB-BA19, IB-BA20

User questions & answers

Question:	What are the horizontal pieces called that attach the rack to the bike frame? I need longer ones in order to install without a steep forward tilt
Answer:	1 1/8”
Question:	Can I adapt a baby chair on the top of the rack
Answer:	does these work with the acme eze tow dolly
Question:	Will these fit a 29er
Answer:	These take an 1-1/8" wrench, or I use a socket & ratchet. Bought a ratchet with a spike on the back end. It works great for releasing them too. Sort of an all-in-one tool that way. Got it for around $10.00 at the Tractor Supply store
Question:	Will this fit a 26 inch Schwinn cruiser
Answer:	no brakes can not mod.pull cars 75-80 down interstate no problem needs radial tires

Product features

Ibera PakRak Touring Carrier Plus+ for Disc Brake Bike

High Quality Materials

This carrier rack is made of durable TIG-welded, heat-treated, anodized aluminum. This material is usually used for the bicycle frames and components, so it is as strong as your bicycle. The high quality material and manufacturing process reinforces it for extra strength. Additionally, the anodized aluminum is corrosion resistance and able to retain dye. The total weight of this rack is about 1.70 lbs (770 g).

Well-Designed Features

The bottom rods are adjustable and the rack fits to bicycle frame between 26" and 29".

Bicycle Panniers Attached

Compatible Models:

Ibera: IB-BA4, IB-BA7, IB-BA9.

BV: BV-BA3-Pair, BV-BA104P.

(Please note most panniers will fit this rack).

Bicycle Trunk Bags Attached

Compatible Models:

Ibera: IB-BA1, IB-BA2, IB-BA3, IB-BK1.

BV: BV-BA2, BV-BA1.

(Please note trunk bags will fit this rack).

Bicycle Taillights Attached

Compatible Models:

BV: BV-L811.

(Please note most taillights will fit this rack).

• LOAD THINGS UP: Whether you’re popping over to the shops or are on a long-distance tour, this bike rack will give you a boost and support your cargo effectively with the TIG-welded aluminum frame and 3 triangulated stays on both sides; stable loading area holds up to 55 lb
• ADJUSTABLE FIT: Does it fit your bike? Chances are, if you have a 26”-29” frame and linear-pull brakes with mounting holes to bolt the rack to, the answer is, “yes!” The height is adjustable to fit road or mountain bikes
• INSTALLATION MINDED: Small things can make a big difference—stainless steel screws with locking nuts will not go loose on rough roads or get rusty after light rains; the quality, thickened wrench makes installation much easier than it should be, and all mounting tools are included
• GUARD ON DUTY: Top fender panel acts as a mudguard, protecting your bag from road spray while the side frames keep panniers from rubbing on tires or spokes; comes with welded-on reflector mount
• WHAT YOU GET: Aluminum bike rear rack, anti-loosening stainless steel screws, quality wrench, Allen key, professional customer service before and after your purchase

User questions & answers

Question:	Does this mount to a trex bike with rim brakes
Answer:	I have not weighed mine but it weighs less than 25 pounds. I would say closer to the 11 pounds.
Question:	Can it be installed on a Montague bike with folding system
Answer:	The screws are metal, but the wing nuts are plastic. You can always replace them...just buy some metal wing nuts at a hardware store!
Question:	will this fit my fat bike
Answer:	Approximately. 11 1/2" Wide x 11 1/2" high x 19 1/2" longFits my medium size cat fine. She is 13lbs.
Question:	Are there any recommended bags to fit this rack
Answer:	I recommend large. I got the large for my 11 pound cat. He fits comfortably but I wouldn'the want it to be smaller.

Product features

Elaborate Design

• Length adjustable arms fit 26” to 29” bike frames.L
• oop to strap your bag luggage on the rack.S
• uitable for non-disc brakes.

Mudguard

Max. load up to 55 lb.

Reflector Mount

To attach a reflector or taillight (not included).

Firm and Stable

Triangulated design enhances the stability.

Anti-Loosening Screws

Stainless steel screws are rustproof and not easy to loosen.

Premium Tools

Help to install the rack with ease.

• 🎁SOLID & STURDY: Made of high strong alumimum alloy which are strong and well built. Whether you’re popping to the shops, on a riding tour or on work commute, this bike rack will support your cargo effectively. ( Even carry the people). Carries up to 110lb
• 🎁ADJUSTABLE & UNIVERSAL FITS: Suitable for most bicycles, such as road bike, mountain bike and ect. (Kids' bike and Trek Verve cannot be used). Designed adjustable height to adjust the length as you like. Perfectly use this bicycle carrier rack with panniers, backpack, basket and more
• 🎁REAR FENDER INCLUDED: With fender abroad under the bike luggages carrier rack, protecting your bag in rainny day or mud road, keeps your luggages dry and clean. While the side frame keeps panniers from rubbing on tire or sopkes
• 🎁QUICK RELEASE INSTALLATION: Quick release clamp for easily mount on the seat post or take the cargo rack off, you can change the seat height easily. Comes with all install tools（Installation instructions video is in the "RELATED VIDEOS "）
• 🎁SAFETY MINDED: Red rear reflector increase visibility on the night cycling to ensure your safety. Bike cargo rack size: Shelf Length 22", Width 5.7 "; Panel Length 14"; Width 5.7"；(Seat Tube Diameter0.85-1.3"). Warm Notice: Any questions, please feel free to contact us

User questions & answers

Question:	Would it be reasonable to use as a front rack
Answer:	No don't do that get a basket or something. Your question upset me.
Question:	What is the weight of this rack
Answer:	Maybe 3-4 pounds? It's not light, but not overly heavy
Question:	I have a problem with the fender installation, can you suggestion what to do
Answer:	Unscrew one of the screws of the rack bottom, and then make the hole in the middle of the fender corresponds to the screw hole.Then tighten the screw. Fender position can be adjusted backward and forward by install in different screw hole.
Question:	How about the quality
Answer:	It's very srong and durable I ride up to 20 miles from home with a metal detector and camping set (80lbs) and I have never had a problem. I also trust it because I rode an injured person on it for 2 miles to hospital. She weighed 130lbs. I don't recommend that to anybody, but it's good to know in a pinch.

Product features

High Quality Material

This bike carrier rack are made of high density, durable and rustproof alumimum alloy, form a triangle shape with the bike which reinforces the stability and is more sturdy than average bike rack.

Well-Built Workmanship

Smooth matt paint makes this bike rack looks more beautiful, features rust-proof and scratch-resistant performance. This bicycle cargo rack are easy to clean so that you can just wipe it when dirty.

Easy Install & Quick Release

Quick release clamp for quick install on the seat post or take off. Fits seat post diameter of 32mm, comes with gasket, non-slip, stable and won't scratch your seat post. If the clamp is too large for your seat post, you can use this gasket to increase the thickness of it.

Rear Fender Included

Comes with a rear fender which is easy to install with this bike rack and protect your lagguages from dust

Adjustable Robs

The support rods and top fender panel are adjustable to fits different size bikes.

• Does NOT fit suspension bike
• Does NOT fit fat tire bike(over 4" tire)
• Does NOT fit beach cruiser bike
• Does NOT fit folding bike

Bonus

Our rear bike rack comes with a rear reflector. It can increase visibility on the night cycling to ensure your safety. ( This bike rack are compatiable with most taillight and reflector)

Product description

Carries up to 25 kg (55 lb), Reflector attachable, TIG-welded, heat-treated, anodized aluminum. Compatible with Ibera trunk bags, side Pannier bags and planet-friendly reusable bags (PakRak IB-BA9, IB-BA11, IB-BA14, IB-BA15, IB-BA16, IB-BA18, IB-BA19, IB-BA20).

Specifications:

Material

Durable lightweight heat-treated aluminum



Features

Plus+ allows Ibera trunk bags and planet-friendly reusable bags (IB-BA1, IB-BA14, IB-BA15, IB-BA18, IB-BA19) to be mounted with Ibera panniers simultaneously (IB-BA4, IB-BA9, IB-BA16, IB-BA20)

Also compatible with strap-attached bags and panniers.



Mount Type

Frame-mounted for heavier top and side loads

Quick-release bag mounting system (bags not included)



Dimensions

15.5" x 6.0" x 14-15" (top shelf is 5.5" in width)

Adjustable height

Fits most 26" and 700c frames



Load weight

Carries up to 55 lb (25kg)



Rack weight

1.68 lbs / 760g

• Frame-mounted for heavier top and side loads
• Quick-release bag mounting system
• Adjustable to fit most 26–29 inch bicycle frames can carry upto 25 kg (55 lb)
• Durable, lightweight aluminum 760g
• Allow to use IBERA Trunk bags (IB-BA11, IB-BA14, IB-BA15, IB-BA22) and most universal strap-attached panniers

User questions & answers

Question:	Will this rack fit on a bike with disc brakes
Answer:	I've got this rack on a Surly which has Caliper brakes. This rack is adjustable so I can't imagine why it wouldn't fit a bike with disc brakes. good luck
Question:	Does it come with the screws to connect to the bike frame? Or should I order them separately
Answer:	It comes with all the screws needed. Depending on the bike you are mounting it on, you will need an adapter (http://www.amazon.com/gp/product/B000AO9PE8/) or not --I did on my old trek 1200--.
Question:	will it fit a 29" genesis
Answer:	It should fit fine. I have the rack set up on a mountain bike and road bike. Both are running 700x32 tires with plenty of clearance.
Question:	Is there an adapter to buy to fit on the back of my bike? The two prongs don't seem to fit anywhere
Answer:	The prongs fit to the post of your bike seat. They may be too short. Email the company and they will send you longer ones at no charge.

Product features

Ibera PakRak Touring Carrier Plus+

High Quality Materials

This carrier rack is made of durable TIG-welded, heat-treated, anodized aluminum. This material is usually used for the bicycle frames and components, so it is as strong as your bicycle. The high quality material and manufacturing process reinforces it for extra strength. Additionally, the anodized aluminum is corrosion resistance and able to retain dye. The total weight of this rack is about 1.68 lbs (760 g).

Well-Designed Features

The bottom rods are adjustable and the rack fits to bicycle frame between 26" and 29".

Load Weight

This rack carries up to 55 lbs (25 kg).

Bicycle Panniers Attached

Compatible Models:

Ibera: IB-BA4, IB-BA7, IB-BA9.

BV: BV-BA3-Pair, BV-BA104P.

(Please note most panniers will fit this rack).

Bicycle Trunk Bags Attached

Compatible Models:

Ibera: IB-BA1, IB-BA2, IB-BA3, IB-BK1.

BV: BV-BA2, BV-BA1.

(Please note trunk bags will fit this rack).

Bicycle Taillights Attached

Compatible Models:

BV: BV-L811.

(Please note most taillights will fit this rack).

Huge Capacity

With our specially-designed rack, fit up two two pannier bags as well as a bag on top with ease!

Product description

Fits 26", 27.5"(650B) & 700C Wheels w/ Disc Brakes Our toughest tubular aluminum rear rack designed for heavy-duty, long distance touring. Specifically developed for bikes equipped with disc brakes. Integrated side bar provides a lower pannier attachment point-allowing more space for cargo on the rack top. QuickTrack® compatible for use with any MTX TrunkBag, rear basket and pannier bag.

The Super Tourist is a classic loaded touring rack for road bikes designed for compatibility with disc brakes. 6061-T6 aluminum construction with 6061-T6 aluminum bracket, hollow aluminum tubes, and stainless steel hardware makes it strong and lightweight while the integrated top fender offers splash protection. The QuickTrack mounting system is compatible with Topeak MTX trunk bags and MTX rear baskets and the rack fits all frames with disc brakes. Includes all mounting hardware.

Topeak's QuickTrack system makes mounting any QuickTrack equipped bag or basket to a Topeak rear rack incredibly easy. Simply line up the composite QuickTrack base with the channels on any Topeak rear rack and slide forward until it clicks into place--there are no tools, no straps, and no hassles. To remove, simply push the yellow release button and slide the bag or basket rearward until completely disengaged.

Features:

• Fits all frames with disc brakes
• Braze-on type attachments
• RX QuickTrack system compatible
• Includes all mounting hardware
• Precision welding at all critical support points
• Solid fender top
• RedLite mount
• Tail light mount
• Made of strong and lightweight hollow 6061 T-6 aluminum

Specifications:

• Weight Capacity: 55 pounds
• Size 13.4 by 9.3 by 16.1 inches (L x W x H)
• Weight: 1.63 pounds

• Fits all road frames with disc brakes
• Braze-on type attachments; weight capacity of 55 pounds
• RX QuickTrack system compatible
• Precision welding at all critical support points
• Made of strong and lightweight hollow 6061 T-6 aluminum

User questions & answers

Question:	Will this rack fit a 2018 Giant Roam 3 disc (large frame
Answer:	I use the case for my Yamaha axp-a4 with a little length space left. The case has a max depth of 4.5" and a max body width of 15" and a max body length of 19.75". The max neck width is 4" and a max head width of 5" and an overall length of 42".
Question:	How to use rear light clip plastic mount when plastic Topeak pieces don't have screw threads
Answer:	This case is designed for a thin body guitar. Body must be less than 4 inches thick.
Question:	Will this fit a bpm f
Answer:	Hello, Well the way I figured it out for my Yamaha Dreadknot was carefully measure the guitar and read the instructions on the case. Maybe you'll get lucky the first time. Sorry I can't give you more info on fit. Play on and enjoy !
Question:	Will the lower bar of the rack accommodate/fit panniers with Rixen & Kaul lock system
Answer:	I believe it will. The description says it fits all models CG

Product features

Topeak Super Tourist Tubular Bicycle Rack DX with Side Bar for Disc Brake Bikes

Fits 26", 27.5"(650B) & 700C Wheels w/ Disc Brakes

Our toughest tubular aluminum rear rack designed for heavy-duty, long distance touring. Specifically developed for bikes equipped with disc brakes. Integrated side bar provides a lower pannier attachment point-allowing more space for cargo on the rack top. QuickTrack compatible for use with any MTX TrunkBag, rear basket and pannier bag.

Product description

Topeak Explorer Rear Mount Rack features an integrated top plate for quick-mount Topeak MTX and RX Quick Track trunk bags. Features: Size (LxWxH): 13.4" x 5.6" x 16.3" One size fits all frames Tough 6061 T6 aluminum construction with 6061 T6 aluminum fitting bracket Hollow tube O/D 10.2mm Integrated top plate for quick-mount Topeak MTX and RX Quick Track trunk bags Integrated fender top

• Wt. 640 g / 1.41 lbs
• Braze-On Type
• 6061 T-6 Hollow Aluminum
• MTX QuickTrack Series
• Max. Weight Capacity 25 kgs / 55 lbs

User questions & answers

Question:	Can this be mounted to a bike with out disc brakes
Answer:	They make one for non disk style brakes. I originally was looking at both racks before I bought my current bike.
Question:	Where does a mtx quicktrack compatible cargo basket attach? will it clip on to the spring or to the main part of the rack
Answer:	It clips onto the spring portion, which means the basket or trunk bag sits slightly farther back than with a regular rack without the spring.
Question:	Will this rak fits a disk brake bicycle
Answer:	They have a version made specifically for disk brake bikes; search "Topeak Explorer Bicycle Rack with Disc Brake Mounts."
Question:	What does the term "without springs" refer to
Answer:	There is another Model of this Explorer Bike Rack made for bikes with disc brake. This model has a spring-loaded cantilever section hinged on the back end of the rack. This section helps hold small items onto the rack without the use of bungee cords. I think this is what the term "without springs" refers to. The regular Topeak Explorer Bike Rack do not have this cantilever section. Cargo on this rack needs to be secured down on the rack with bungee cords, rope, etc. A picture of this Topeak Explorer Bike Rack for bikes with disc-brake can be found on their product web site.

Product description

The rear bike racks for bicycles is made of high quality aluminum alloy with quick release design and adjustable shelf, which carries up to 20lb weight, fit for many kinds of bikes, such as mountain bike, battery bike, road bike, folding bike and etc.



Features:

1. The bike carrier rack with design of solid and sturdy aluminum alloy is ideal for cycling enthusiasts for long distance touring.The rack is light weight and water proof and the stainless steel screws is rust-proof, you can use it in rainy or wet conditions.

2. The quick release design is easy to install and remove, which is very convenient for temporary use of bikes and it can save your time.

3. It can carries up to 20lb, perfect for carrying some stuff on your trips,work commutes.

4. You can put your luggage on the shelf and don't have to carry it on your back, which will lighten your load and make your travels easier.

5.The adjustable design makes it suitable for different sizes of bikes, like mountain bike, battery bike, road bike, folding bike and etc.



Specification:

Size: 34 cm x 12 cm/13.4 x 4.7 inch

Color: black

Material: aluminium

Max weight capacity: 9kg/20lb

Fit seat tube diameter: 27.2-31.8 mm/1.1-1.3 inch

Bicycle type: mountain bike, battery bike, road bike, folding bike and etc



Note:

1. The product is NOT equipped with support frame.

2. The rack cannot be loaded with a passenger,children,or any kind of child seat.



Package Includes:

1 x Bicycle Rear Rack

6 x Screws



If anything at all goes wrong with our product, please feel free to contact us, we will answer and solve your problems as soon as possible.

• 【High Quality 】 --- The bicycle carrier rack is made of strong and durable aluminum alloy material, which can bear more weight and will not be easily damaged. And it is equipped with stainless steel screws, which can help you ride freely in rainy or humid environments and keep your bicycle dryer and cleaner.
• 【Quick Release】 --- Easy to replace and install on the sitting post of the bike rack. The retractable bike cargo racks is fixed with quick-release buckles, which is convenient to disassemble and assemble whithout any tools, very suitable for temporary use of bikes. 4 original high strength screws and the following two reliable screws can securely hold the bracket in place.
• 【Adjustable Shelf】 --- There is an inner hexagon at the bottom for tight and loose loading, you can adjust the length of the bicycle rear seat post rack by yourself and extends backwards or forwards according to your needs (rack length:14.2inch~19.7inch ). So the bracket can be adjusted according to different seat post sizes.
• 【Load Capacity and Unique Design】 --- The bike luggage rack supports max 9kg/20lb, which helps you easily transport your luggage, used with panniers, backpacks, baskets, etc. The weight can be increased according to the strength of the seatpost. In addition, the slightly raised design of tail and the front flap helps to keep the cargo in place and prevent it from falling off. And the black color is more resistant to dirt.
• 【Fit Almost Bikes】 --- Shelf length 34 cm/13.4 inch, width 12 cm/4.7 inch , suitable for most bicycles that seat rod caliber is under 32mm/1.3 inch. The mounting bracket fits for seat tube diameters of 27.2-31.8 mm/1.1-1.3 inch. Suitable for many kinds of bikes, such as mountain bike, battery bike, road bike, folding bike and etc. Kindly note that kids' bike can not be used.

• 【Aluminum Alloy】The mountain bike rear rack adopts high-strength aluminum alloy material, durable and sturdy
• 【With Mounting Accessories】Rear Bike Carrier Rack come with installation accessories, easy to fix tightly onto the seat post of your bicycle
• 【Load 55 Lbs】Lightweight, but carries up to 55 lbs; Wonderful company for your cycling trip
• 【Lower Forks Are Adjustable】The pair of lower forks are adjustable based on your bike, which provides added security
• 【Bicycles with a Diameter Less Than 33mm】Bike Rear Tire Rack suitable for bike with seat post diameter is less than 33mm

User questions & answers

Question:	How do I turn on the rear red light
Answer:	Mine didn't come with a light. it's just a reflector.
Question:	Does this rear rack fit a schwinn boundary electric mountain bike, 29-inch wheels
Answer:	Its pretty much a universal fit. The lower bars slide in and out and clamp on. Put it on my sondors electric bike.
Question:	Description says mountain bike rack but one photo shows a road bike. Will it fit a road bike
Answer:	Uni fit
Question:	My bike is a Sondors Original with 26" x 4.9" tires. Will the rack fit this wide tire bike
Answer:	Yes ,I put it on my sondors original