14 best topeak mountain bike lights
Toothpaste is a commonly used product in oral care and personal hygiene routines. It plays a crucial role in maintaining oral health by cleaning teeth, preventing tooth decay, and freshening breath. Here are some key points related to toothpaste:
Composition: Toothpaste typically consists of several key ingredients, including abrasive agents (such as calcium carbonate or silica) for cleaning and removing stains, fluoride to prevent tooth decay, detergents (like sodium lauryl sulfate) for foaming and cleaning, flavoring agents for taste, and thickeners to give it a stable consistency.
Fluoride: Fluoride is one of the most important components of toothpaste. It helps strengthen tooth enamel and make teeth more resistant to acid attacks from bacteria and sugars. This, in turn, prevents tooth decay and cavities.
Abrasive Agents: Abrasive particles in toothpaste help to remove plaque and surface stains from teeth. These abrasives should be gentle enough not to damage the enamel but effective at removing debris and stains.
Flavor and Sweeteners: Toothpaste often includes flavorings like mint or fruit to provide a pleasant taste and mask any undesirable flavors. Sweeteners are sometimes added for taste, although modern toothpaste formulations tend to use artificial sweeteners to avoid promoting tooth decay.
Desensitizing Agents: Some toothpaste varieties include desensitizing agents like potassium nitrate or strontium chloride to help reduce tooth sensitivity.
Specialty Toothpaste: There are various types of specialty toothpaste available for specific oral care needs. These may include toothpaste for sensitive teeth, whitening toothpaste, anti-gingivitis toothpaste, and more.
Children's Toothpaste: Toothpaste designed for children often contains lower levels of fluoride to reduce the risk of fluorosis (a cosmetic issue that can occur due to excessive fluoride exposure) and is typically flavored to make brushing more enjoyable for kids.
Natural and Organic Toothpaste: Some individuals prefer natural or organic toothpaste options, which may use ingredients like baking soda, essential oils, and herbal extracts for cleaning and flavoring.
Toothpaste and Brushing Technique: It's essential to use the right amount of toothpaste (usually a pea-sized amount for adults) and to brush for at least two minutes, making sure to reach all tooth surfaces and the gumline.
Storage: Toothpaste should be stored at room temperature and kept in a cool, dry place. Extreme temperatures can affect its texture and effectiveness.
Expiration: Toothpaste typically has a shelf life of 2-3 years. It's a good practice to check the expiration date before using it.
Brands: There are numerous toothpaste brands available worldwide, each offering various formulations and flavors to cater to different preferences and needs.
Choosing the right toothpaste for your oral care needs depends on factors like your age, specific dental concerns, and personal preferences.Regular and proper brushing, in conjunction with routine dental check-ups, is crucial for maintaining good oral hygiene and overall dental health.
Below you can find our editor's choice of the best topeak mountain bike lights on the market
Guts
GRAPHIX
2 Pack Imillet Mop and Broom Holder, Wall Mounted Organizer Mop and Broom Storage Tool Rack with 5 Ball Slots and 6 Hooks (Black)
- Tidy Your Home: 5 ball slots and 6 hooks design, organize your annoying cleaning tools within small space.
- Spring Loaded: Special spring clips design with rolling rubber ball that make sure the broom and mop will not fall out,including wet mop, dirty rakes, stick vacuum and other heavy stuff
- Wide Compatible To Everywhere: Apply to your garage, garden, kitchen, laundry, offices and more. It is strong and sturdy. Keep solid on the wall with the slots and screws (Included). It can organize most of tools of your home.
- Heavy Duty: Mop holder grip everything tightly and securely. Each rolling ball holds up to 6.5 pounds of weight(smooth rod is up to 3 pounds), holder can hold up to about 11 tools in total. Made of high quality ABS and slots and screws.We upgraded our products after 2018 July 1st, and we improved the quality of this products that are easy-to-drop. Now the products can grip everything tightly and securely.
- Easy Install: Wall mounted, detailed installation steps on the package. Easy to install with slots and screws (included).
User questions & answers
| Question: | Can anyone answer if brooms are removed with ease. that actually has used it |
| Answer: | Yes the brooms are easy to remove. I am very happy with this broom holder. It keeps everything organized and the hooks are a great addition. |
| Question: | What size drill bit do you use |
| Answer: | Used pilot hole and also used anchors in drywall. Husband used appropriate bit for job and he used bit that fit each screw. They were different sizes. |
| Question: | Could this be mounted on the back of a pantry door |
| Answer: | Of course,it can be mounted on the back of a pantry door |
| Question: | Could I push the broom in and remove it with one hand |
| Answer: | I think so,we upgrade the spring loaded,it is more easy to push and remove the broom |
Product features
Upgrade Broom Rack
The new broom holder allows for the handle to slide in from the front and is held tight in place.Just use one hand to put broom in holder,even the kids also can do it,easy to use.
Space Saver
Imillet broom holder can keep your broom, closet, kitchen, garage, garden, bathroom, or laundry room in organized. Also suitable for garden and yard tools racks storage and organize.
5 Slots 6 Hooks
5 postions can hold up mop, broom, dustpan, shovel, small vacuum, small garden tools and others.6 foldable hooks are great for rags, bristle brushes, swifters, fly swatter and other small tools.
Topeak DeFender M1 Mountain Bike Fender (Front) , Black, 60 x 10 x 12 cm / 23.6” x 3.9” x 4.7” (M1)
Topeak
Product description
Topeak, Defender M1 Front Fender Black Fits All Std Front Forks And Reverse Arch Design. QR System
- QR Fork Attachment fits ø 19.6~ø26 mm - M1
- Rear Angle Adjustable Two Tone Injected Nylon
- This fender fits 26-inch MTB
- 190 g / 0.42 lb - M1
- QR Fork Attachment Fits 19.6-26mm & 27.7-35mm steerer tubes
User questions & answers
| Question: | What is the overall length? What is the length above and below the fork tube |
| Answer: | Heater can be controlled by a separate wireless wall thermostat. I don’t know about temp settings remaining or not. One wireless thermostat can control more than one heater. Dimplex provides a pretty good explanation of how to solve specific heating problems. My recently purchased and installed heater/ wall thermostat combo in a bathroom works perfectly . Wall thermostat digital screen doesn’t light up however. Difficult to see settings. |
| Question: | Will it work on my prodeco storm |
| Answer: | It depends on the Voltage applied. This particular heater is 1250 Watts and if it is a 120 Volt model it will draw 10.4 Amps. If it is a 230 Volt model it will pull 5.4 amps. |
| Question: | will this fit a 2021 Trek Dual Sport 2 with 700x40 tires |
| Answer: | This model is 240v. The 120v ends in W11 |
| Question: | Any one know if the Defender will work with 29 inch wheels |
| Answer: | It can be mounted on the floor as the heat comes out of top. I wouldn’t put furniture closer then 10 inches |
Product features
DEFENDER M1
For 26" Wheel DeFender M1 is compatible with all standard front forks including reverse arch designs, the unique quick release attachment system integrates the DeFender M1 seamlessly with the front of your bike. A stiff engineering grade polymer support frame is co-molded to a softer more flexible material at the trailing edge for greater durability. A highly polished underside helps prevent dirt buildup and aids in cleaning.
ATTACHMENT QR fork attachment fits ø19.6 - ø26 mm & ø27.7 - ø35 mm steerer tube
MATERIAL Two tone injected high impact resistant plastic
ADDED FEATURE Highly polished underside
SIZE 57 x 11.5 x 8.5 cm / 22.4” x 4.5” x 3.3”
WEIGHT190 g / 6.69 oz
Topeak Mountain Morph Bike Pump , Silver, Black, 35 x 5.8 x 3 cm / 13.8” x 2.3” x 1.2”
Topeak
Product description
Like bringing your floor pump on the trail. High volume barrel fills wide tires fast while fold out foot pad and flexible hose make inflation a snap.
- High efficiency with thumblock levers
- T-handle Bike Pump
- Flexible hose and fold-down foot pad
User questions & answers
| Question: | This pump have gauge |
| Answer: | 372 is DOZUKI saw for precise work,has Support of the back of the metal.410 is for general wood,ply wood ,Laminated wood, timber,9.5inch length.And this model is 450 for general wood,ply wood ,Laminated wood, timber,10inch length.thank you for asking!! |
| Question: | I want a mini morph tire pump for my off road motorcycle,.. which one do you recomend |
| Answer: | 16 TPI crosscut. Gyokucho no. 410. |
| Question: | In the description it says that this pump is for Presta/Schrader valves; does that mean I will not need an adapter for my Presta valve tires |
| Answer: | At this time we do not have a 1/4” shank version of our Dovetail Bit. Any 1/2”, 14 degree Dovetail Bit will cut the proper channel, and Frued makes a very good one with a 1/4” shank: https://amzn.to/35GLlzS |
| Question: | Anyone explain the difference between this one and the road morph? My local bike shop only had the road morph so I got that for my mountain bike |
| Answer: | No The Dado stop is not included. But you can get it here if you decide you want it: https://www.amazon.com/MATCHFIT-MICROJIG-Accessory-Dovetail-Clamps/dp/B01N75BM30/ref=sr_1_19?m=A1RE88JTEMUEWO&marketplaceID=ATVPDKIKX0DER&qid=1572303370&s=merchant-items&sr=1-19 |
Product features
MOUNTAIN MORPH
Like bringing your floor pump on the trail. High volume barrel fills wide tires fast while fold out foot pad and flexible hose make inflation a snap.
Centerline Mount Bracket
(Art No. TRP-3C)
T-handle
T-type dual density polymer
BARREL Butted aluminum
THUMB LOCK Plastic
Fold-Out Foot Pad
Flexible Hose
HEAD Fits Presta / Schrader / Dunlop valves
SIZE 35 x 5.8 x 3 cm / 13.8” x 2.3” x 1.2”
WEIGHT 250 g / 8.80 oz
CAPACITY 160 psi / 11 bar
Topeak Explorer Rack
Product description
Topeak Explorer Rear Mount Rack features an integrated top plate for quick-mount Topeak MTX and RX Quick Track trunk bags. Features: Size (LxWxH): 13.4" x 5.6" x 16.3" One size fits all frames Tough 6061 T6 aluminum construction with 6061 T6 aluminum fitting bracket Hollow tube O/D 10.2mm Integrated top plate for quick-mount Topeak MTX and RX Quick Track trunk bags Integrated fender top
- Wt. 640 g / 1.41 lbs
- Braze-On Type
- 6061 T-6 Hollow Aluminum
- MTX QuickTrack Series
- Max. Weight Capacity 25 kgs / 55 lbs
User questions & answers
| Question: | Can this be mounted to a bike with out disc brakes |
| Answer: | They make one for non disk style brakes. I originally was looking at both racks before I bought my current bike. |
| Question: | Where does a mtx quicktrack compatible cargo basket attach? will it clip on to the spring or to the main part of the rack |
| Answer: | It clips onto the spring portion, which means the basket or trunk bag sits slightly farther back than with a regular rack without the spring. |
| Question: | Will this rak fits a disk brake bicycle |
| Answer: | They have a version made specifically for disk brake bikes; search "Topeak Explorer Bicycle Rack with Disc Brake Mounts." |
| Question: | What does the term "without springs" refer to |
| Answer: | There is another Model of this Explorer Bike Rack made for bikes with disc brake. This model has a spring-loaded cantilever section hinged on the back end of the rack. This section helps hold small items onto the rack without the use of bungee cords. I think this is what the term "without springs" refers to. The regular Topeak Explorer Bike Rack do not have this cantilever section. Cargo on this rack needs to be secured down on the rack with bungee cords, rope, etc. A picture of this Topeak Explorer Bike Rack for bikes with disc-brake can be found on their product web site. |
Topeak Sidekick Wedge Pack with F25 Fixer
Topeak
Product description
At Topeak, exciting new ideas for accessories are spinning at full speed and driving us ahead in a never ending cycle of innovation. From the dreams of our designers and engineers great cycling accessories are born - spun out from the ever turning gears of their collective imagination. From our humble beginning in 1991 our passion for cycling has evolved into the making of the worlds finest cycling accessories. In almost every category, our products set the standard of innovation, performance and durability. Products like our JoeBlow series floor pumps, Alien tools and RaceRocket mini pumps to our patented technologies like SmartHead, TwinHead, PressureRite, QuickTrack and QuickClick systems to the full service PrepStation and PanoBike App Topeak delivers the convenience and enjoyment your cycling customers deserve. Products.
From the Manufacturer
Topeak SideKick Wedge Seat Bag: Black; SM
- Used by both professional and amateur riders alike
- Made using high quality materials and components
- Tested to ensure quality and durability
- 600 Denier & EVA Foam construction
- Semi-rigid design holds its shape well and is weather resistant
- QuickClick mount with seatpost strap for stability
- Large, side-opening molded panels provides complete access to contents
User questions & answers
| Question: | Does it work |
| Answer: | L64 x W8.5 x H15 cm (L25.2" xW3.3" x H5.9") The gap between the fender and the tube depends on your fork but this fender is made to fit 27.5" and 29" tires. All of this information could be found on the manufactures website, I am not sure why the seller was too lazy to add the specs. Personally after having this fender on for a few muddy races I can say that is is completely worthless as a fender, looks badass, but doesn't function as a fender to stop any amount of mud dirt or water from covering your entire body |
| Question: | How do you install this? It comes with no directions |
| Answer: | I looked up the prodeco storm and I'm sure this will work. I used it on my Montague Paratrooper. At first I thought it wouldn't fit and then I realized I just had to remove the larger fitting from the M1 to fit up in the shaft. It'll fit just fine. Good riding. Ant |
| Question: | What is the model number |
| Answer: | In order to answer the question need to know the size of fork opening. This fender has a compression attachment that fits inside the cavity between the forks. I am not sure what diameter your Trek Bike has. I also think that your tire size is too big in diameter and width for this fender. |
| Question: | how to clean it up if it's dirty |
| Answer: | Package says for 26", but I just installed it on my 29er and it will work as long as it's not greater than 60mm opening in fork. Coverage is minimal, but probably sufficient (will know soon when I actually ride it). |
Product features
Two Sizes Available
SMALL
- Capacity: 0.5 L / 30 ci
- Size: 14 x 11 x 9.5 cm / 5.5” x 4.3” x 3.7”
- Weight: 110 g / 3.87 oz
MEDIUM
- Capacity: 0.75 L / 45 ci
- Size: 18 x 11.5 x 11 cm / 7.1” x 4.5” x 4.3”
- Weight: 190 g / 6.69 oz
Includes F25 Fixer
Included F25 for fast, easy on / off & swapping between bikes
Aerodynamic Design
Rigid aerodynamic design resists sagging＆ & swaying while riding
Protective and Water Repellent
Molded panels are protective and water repellent
Reflective Strip
3M reflective strip for increased nighttime visibility
Topeak Aero Wedge Velcro Pack
12 years and up
Product description
"Topeak, Aero Wedge W/Straps Black-Medium Expanding compartments can boost your storage space in seconds. The Topeak Aero Wedge Pack is a convenient gear-toting solution that clips instantly to the back of your bike's saddle and seat post. Constructed of rugged 1,200-denier Cordura material with DuPont Teflon coating for weather resistance, the pack attaches with a Velcro strap mount and snap-on buckles. The expandable bag's large main opening offers room for all of your essential road gear, and a 3M reflective strip and rear light attachment offer safety-minded touches. Specifications 130-gram (0.29-pound) weight 60-to-80-cubic-inch capacity Measures 4.1-by-4.7-by-7.9 inches (W x H x D) "
 Expanding compartments can boost your storage space in seconds. |
Specifications
- 130-gram (0.29-pound) weight
- 60-to-80-cubic-inch capacity
- Measures 4.1-by-4.7-by-7.9 inches (W x H x D)
- Pack is convenient gear-toting solution that clips instantly to the back of your bike's saddle and seat post
- Constructed of rugged 1,200-denier Cordura material with DuPont coating for weather resistance
- Pack attaches with Velcro strap mount and snap-on buckles
- Large main opening offers room for essential road gear; 3M reflective strip and rear light attachment offer safety-minded touches
- 130-gram (0.29-pound) weight; 60-to-80-cubic-inch capacity; measures 4.1-by-4.7-by-7.9 inches (W x H x D)
User questions & answers
| Question: | Do you think it will hold Samsung galaxy S3 size phone |
| Answer: | works well for carrying a multi tool, a set of tire removers, a tube, your car keys and ID. Easy to clip on and off the bike. |
| Question: | What are the dimensions of the pack? I'm trying to compare it to the medium |
| Answer: | It’s pretty easy, actually. First, use the screws to secure the plastic locking mechanism to the underside of the seat. You may have to adjust these pieces for a secure fit on the seat bars. Then, slide the bag’s plastic fastener into the groove on the mechanism. There should be no “wiggle” on the secured bag if done correctly. Use the Velcro strap on the bag to secure it to the seat post. You’re now ready to ride! |
| Question: | what mini pump will fit in it |
| Answer: | The Topeak Sidekick Wedge Pack I have is classified as a size medium. Topeak lists this as an Article Number TC2281B. They also have a size small available. |
| Question: | Will this fit an iphone 6 plus, a wallet and a set of keys |
| Answer: | interior is easy to access and he exterior can be wiped with a damp cloth. However, I have never had it covered in mud as I only use it on my road bike |
Product features
Expands
Medium & large expand to add 20-30% more volume
Light Clip
Features a light clip for extra safety
Large Opening
Large openings swallow up all of your gear
Reflective Strip
3M reflective strip adds safety at night
MTX Rear Bicycle Basket
Topeak
- Used by both professional and amateur riders alike
- Made using high quality materials and components
- Tested to ensure quality and durability
- Max Load - 7.5 kg / 16.5 lb
- 1600 g / 3.53 lbs
- Welded Metal Wire
- 23.44 l / 1430 ci Capacity
User questions & answers
| Question: | what are the simensions |
| Answer: | I have not yet tried the train popper on this tool but I have a lot of experience with bikes and bike chains and just to answer this question I gauged it with my micrometer and it is 3.25 mm I think that that is mostly a standard size for BMX 21 speed and mountain bike sizes those are our gear sets with different size chain links and sometimes me use a smaller pin but usually only with custom bikes or custom gear sets which you probably know if you had a custom chain I think they should cover most basic bicycle chains maybe even a motorcycle but that might exceed the torque abilities of this tool so yes this should most likely in most cases fit your 21 speed chain |
| Question: | Does it fit any topeak rear rack |
| Answer: | no |
| Question: | What is maximum dog weight for this basket |
| Answer: | Unfortunately, probably not. Besides my APX500 steel string, it fits a Takamine EG128 (barely) acoustic/electric classical. Both these guitars are thinner and not as wide in the body. I started with a C40 decades ago, and if memory serves me, it is wider and thicker. I hope you like your guitar! ciao. |
| Question: | How can you mount it on a non-Topeak bike rack |
| Answer: | I use mine for an Apx 500, and do no know if a 700ii or 700 could also use this case. |
Product features
Carries groceries, books and more!
Keep your goods secure in transit with this high quality basket. The MTX QuickTrack system allows quick and easy removal from your bike. Just flip up the handle and do your shopping. When you return just click and go!
COMPARTMENT One divided
CAPACITY 23.44 L / 1430 ci
MATERIAL Welded Metal Wire
ATTACHMENT MTX QuickTrack System (Fixer 6)
MAX LOAD 7.5 kg / 16.5 lb
ADDED FEATURES Carry Handle, Optional Cargo Net
SIZE 40.5 x 33.5 x 24.1 cm / 15.9” x 13.2” x 9.5”
Topeak SmartGauge D2
Topeak
- Used by both professional and amateur riders alike
- Made using high quality materials and components
- Tested to ensure quality and durability
- Head Smart Head/Gauge Digital - PSI, Bar, kg/cm2
- Battery CR2032 x 1 (included)
- Capacity Reads 250 psi/17 bar
- Size (L x W x H) 10.2 x 4.5 x 3.5 cm/4" x 1.8" x 1.4"
User questions & answers
| Question: | Does this work correctly with presta valves? i know the description says so, but other gauges also claim that and do not perform well with them |
| Answer: | I found that removing the spring from the nozzle makes this very easy (i.e. no leakage) to use with presta valves. It also still works on Schrader valves without the spring. |
| Question: | How big is this? Is it small enough to fit comfortably in a seatpack on a road bike |
| Answer: | Don't buy a gauge that goes up to 60 if you need to measure less than 5. That's just common sense. If you need to measure 3-5 psi, buy an 8-10 psi gauge, which sounds like a specialty tool. |
| Question: | How does the air release reading work on this?! i press the release button and air is escaping but the psi doesn't lower on the readout |
| Answer: | Contact Joes Racing to obtain a Spec & Data Sheet. 1-877-267-1525. Best, |
| Question: | Will this work on Presta and Shrader valves |
| Answer: | I think it is +/- 3% of full scale deflection. So on a 60 PSI max Gauge it would be +/- 1.8 PSI throughout the entire scale. Besides being able to read the gauge more accurately and buy one in the range your working with like for me its regular car tires so 60 PSI is best and the dial has 1 PSI markings if you get a 120 PSI Gauge with 2 PSI markings 3% of that is now +/- 3.6 PSI which is not good for standard tire measurements which are in the 30 PSI range. Overkill is not good with gauges |
Product features
SmartGauge D2
The SmartGauge D2 is an precision, lightweight, all-purpose air pressure gauge. Packed with features, it is an essential tool whether you are fine-tuning the pressure on your tires, your suspension, or just to keep in the glove box of your car for when you need it.
Body: Engineering grade plastic
Size: 4"x1.8"x1.4"
Weight: 65 gr
ART#: TSG-02
Topeak Defender M2 Mountain Bike Fender (Rear)
Topeak
Product description
DeFenderª M2 has an ultra-secure quick release mounting system that easily adjusts from 25.4 to 34.9mm, easily fitting standard and oversized seat posts. The two-pivot arm articulates for improved tire coverage and perfect bike fit. A stiff engineering grade plastic support frame is co-molded to a softer more flexible material at the trailing edge for greater durability.
- Compatible With All Standard Front Forks Including Reverse Arch Designs* Two Tone Injected Nylon For Durability And Flexibility* 190G
User questions & answers
| Question: | My seat stem diameter is a bit too small is there anyway to remedy this |
| Answer: | The large is 120 cubic inches expanded vs 80 ci expanded for the medium. |
| Question: | I have installed a rear rack on my bike. Does this fender fits, in others words is there enough room to avoid collision with the rear rack |
| Answer: | I use a Topeak RaceRocket hand pump and it fits in there perfectly (by unzipping the extension part): http://www.amazon.com/Topeak-RaceRocket-Mini-Pump-Black/dp/B00320OJAW/ref=sr_1_2?ie=UTF8&qid=1411675919&sr=8-2&keywords=topeak+hand+pump**Note** If your pump doesn't fit inside of it, there are elastic bands on the bottom of the bag that can easily hold any small hand pump.Along with the pump, I have:Emergency Tools1 spare tube (can fit 2 if necessary)1 Rema TipTop patch kit (the full box, didn't even bother taking out the contents)2 tire levers2 surgical glovesZip tiesI can keep my phone/keys in there if i want as wellthere really is a lot of room to spare, buy this bag, it's pretty great! |
| Question: | Is this fender compatible with 29 inch wheels |
| Answer: | yes, will fit in the small bag. |
Product features
DEFENDER M2
For 26" Wheel DeFender M2 has an ultra-secure quick release mounting system that easily adjusts from 25.4 to 34.9 mm, easily fitting standard and oversized seat posts. The two-pivot arm articulates for improved tire coverage and perfect bike fit. A stiff engineering grade polymer support frame is co-molded to a softer more flexible material at the trailing edge for greater durability. A highly polished underside helps prevent dirt buildup and aids in cleaning.
ATTACHMENT QR slip joint clamp fits ø25.4 - ø34.9 mm seat posts
ADJUSTABLE Multiple angles adjustable
MATERIAL Two tone injected high impact resistant plastic
ADDED FEATURE Highly polished underside
SIZE 40 x 12 x 10 cm / 15.8” x 4.7” x 3.9”
WEIGHT 230 g / 8.10 oz
Topeak Tail Lux Helmet light
Topeak
Product description
Extra compact tail light that can be mounted on helmet or any Topeak bag or rack. Ultra bright 0.5W red LED for excellent visibility. Two modes: constant and blinking (burn time 50 hours/ 100 hours). Battery included.
- extra compact with 0.5 w ultra-bright red led for excellent visibility. mounts to helmet or any topeak bag or rack with ease
- lamp - 0.5w ultra-bright red led
- lamp housing - injection-molded plastic
- control / burn time - 2 modes (approx) 50 hr constant / 100 hr blinking
- light output - 4 cd
- size - 3 x 3 x 1.7 cm / 1.2” x 1.2” x 0.7”
- Sport type: Cycling
User questions & answers
| Question: | How wide is the base (i.e. not the 1.33" listed of the light itself, but the width of the cylindrical base that the light sits on top of |
| Answer: | There is a way to pull the strap in to make it shorter. If you have already done that then add some rubber strips or something similar around your seat post to increase the diameter. |
| Question: | How many lumens |
| Answer: | It will fit above the rear rack as it attaches to the seatpost. It may fit underneath the rear rack depending on the style and construction of your rack. |
| Question: | how do you open the battery compartment to change it |
| Answer: | It won't obstruct the wheel but you won't have much coverage over back side of the tire. It is barely adequate for a 26" tire. |
| Question: | Does this come with a strap |
| Answer: | Yes. I looked up the dimensions of the samsung galaxy s3 136.6 x 70.6 x 8.6 mm (5.38 x 2.78 x 0.34 in) and made a paper cut out. The phone should fit easily and I think you will still be able to fit some tools and a tire tube. I own the medium wedge pack. |
Product features
TAIL LUX
Extra compact with 0.5 W ultra-bright red LED for excellent visibility. Mounts to helmet or any Topeak bag or rack with ease.
Topeak Bags
Mounts to any Topeak bag with ease
MTX Racks
Attaches to any Topeak bag or MTX racks with the included mounting clip
Helmets
Attaches to any bike helmet with the included hook & loop straps
Push Lens
Push lens to turn light on / off ＆& switch modes
Visible Range
Visible Range 180 degrees
Specs
CONTROL / BURN TIME
2 Modes (Approx) 50 hr Constant / 100 hr Blinking
LAMP 0.5W ultra-bright red LED
LAMP HOUSING Injection-molded Plastic
LIGHT OUTPUT 4 cd
Topeak HeadLux Helmet Light
Topeak
Product description
Ride safe and be seen at night with the helmet light. Innovative double sided helmet mounted light shines white facing forward and red towards the rear and features 4 LEDs with wrap around lenses for visibility from all angles. Top mounted button controls constant and blinking modes.
- Lamp 2 White LED’s and 2 Red LED’s CR2032 Batteries (Included)
- 3 Modes White Constant / Red Blinking, White Blinking / Red Blinking, White Constant / Red Constant
- Burn Time (approx) 70 hrs / 100 hrs / 50 hrs
- Size (L x W x H) 6.5 x 3.5 x 3 cm / 2.6” x 1.4” x 1.2”
- Weight 24 g / 0.84 oz (light only)
User questions & answers
| Question: | Do both red/white lights blink |
| Answer: | Yes, when you push the button on top it cycles through a pattern of solid and blinking lights. The one I normally use is both white and red lights blinking.I am not particularly happy with this light though. I returned the first one I bought when it quit working, and the replacement is really just as flaky. Literally 20 minutes ago I got off my bike and tried to turn it off. The switch cycled through all the patterns except one: off. To turn it off I had to open it up, detaching the batteries, then close it. I don't recommend this. |
| Question: | How does it attach to a bike helmet |
| Answer: | There is a strap attached to the device with Velcro on it. You thread it through the hole of your choice on your helmet and fasten it that way. There is also an extra, loose piece of soft material and Velcro on it. Once the device is where you want it, you take that loose piece and fasten it to protect the top of your head. The loose piece attaches so that the soft part comes into contact with your head. Ingenious! |
| Question: | What type of batteries are needed? Can the batteries be changed without tools |
| Answer: | The light uses 2 small round lithium batteries which are supplied.No tools are needed to change them.My wife and I are very happy with our helmet lights. |
| Question: | How well does this light the path ahead of you, or does it olny help others to see you |
| Answer: | Lighting is minimal. mostly for safety. |
Product features
HEADLUX
Ride safe and be seen at night with the helmet light. Innovative double sided helmet mounted light shines white facing forward and red towards the rear and features 4 LEDs with wrap around lenses for visibility from all angles. Top mounted button controls constant and blinking modes.
Visible Range
Visible Range 220 degrees
Lighting Modes
Top mounted button controls lighting modes
Versatile Bracket
Versatile bracket provides options for mounting on road bike dropbar
Helmet Mount
Mounts to any bike helmet
Topeak QR BeamRack MTX Bike Rack (V Type)
Topeak
Product description
For M / L Size Frames For MTB or heavy commuting use. QR mechanism is secure and easy to use. 9 kg (20 lb) carrying capacity. Compatible with all MTX TrunkBags. Includes two rubber bungees and safety reflector
- CLAMP - Fits 25.4 - 31.8 mm (shims Incl.)
- BAG COMPATIBILITY - MTX TrunkBags, Topeak
- MAX WEIGHT CAPACITY - 9 kg / 20 lb
- ADDED FEATURES - Rubber bungee, Safety reflector RedLite Mount, Tail Light Mount
- MATERIAL - Aluminum beam
- WEIGHT - 696 g / 1.54 lb
- SIZE - 51 x 12 x 11 cm / 20.1” x 4.7” x 4.3”
User questions & answers
| Question: | Can the rack be leveled for different seat post angles |
| Answer: | Depends you have disc rack or non-disc rack. |
| Question: | will the topeak qr beam rack mtx bicycle rack (v type) fit the cube stereo hybrid 140 hpc |
| Answer: | My feeling is it will fit.. |
| Question: | Will this be ok for the aventon sinch |
| Answer: | It has its own clip so you can clip it anywhere on the seat or the bike |
| Question: | What's the vertical height distance from bottom of rack platform to top of clamp? Accuracy is a virtue. Ignore if you don't know or have to guess |
| Answer: | Yes. I mounted one on a beach cruiser. |
Product features
Compatible
Compatible with MTX TrunkBags
Quick Release
Features a quick release clamp mount
Reflector
Safety reflector is included
Secure
Integrated rubber bungee cord secures your cargo
Topeak Road Morph G Mini Pump
Topeak
Product description
You donAAAt have to guess tire pressure with the Topeak Road Morph G Mini Pump thanks to a flip-out analog gauge that reads up to 140psi. Now you can say goodbye to startling explosions or frequent stops to add more air. Lightweight and durable butted aluminum construction ensures the Morph G survives a skip across the tarmac after you drop it out of your back pocket at 30mph.
Product Features
- Material: , plastic
- Dimensions:
- Valve Type:
- Max Pressure:
- Hose Length:
- Deflate:
- Weight: 220 g
- Recommended Use: road cycling, MTB
- Manufacturer Warranty:
- Used by both professional and amateur riders alike
- Made using high quality materials and components
- Tested to ensure quality and durability
- HEAD Fits Presta/Schrader/Dunlop valves
- GAUGE In-line gauge, Reads 140 psi/9.6 bar
- HANDLE T-type dual density polymer
- ADDED FEATURES Fold-out foot pad, Flexible hose Includes centerline mount bracket (Art No. TRP-3C)
User questions & answers
| Question: | Does it come with a mount that attaches to the waterbottle fittings but places the pump to the side so I can still mount a bottle cage |
| Answer: | It comes with ties to place it anywhere as well as screws to the waterbottle fittings. You could use the ties to place it offset of the water bottle with no issues |
| Question: | Where was it made |
| Answer: | Taiwan |
| Question: | what is the length |
| Answer: | Overall length is 13 3/4 " (35 cm) |
| Question: | How does the pump mount on the bike |
| Answer: | Pump comes with a clip-on mount that attaches to any tube on the bike with two heavy duty cable ties (included). I carry mine on the seat tube right beside the rear water bottle. It can also be screw-mounted using either of the water bottle locations. A Velcro strap provides backup for the spring clip. |
Product features
ROAD MORPH G
Morph technology in a road pump. Extra long barrel gives huge performance. Includes in-line gauge for perfect inflation every time.
In-line Gauge
Reads 140 psi / 9.6 bar
T-handle
Dual density polymer
Fold-Out Foot Pad
Flexible Hose
HEAD Fits Presta / Schrader / Dunlop valves
SIZE 35 x 5.7 x 2.8 cm / 13.8” x 2.2” x 1.1”
WEIGHT 220 g / 7.74 oz
Latest Reviews
View all
Roller Coasters
- Updated: 01.07.2023
- Read reviews
Printer With Airprints
- Updated: 15.06.2023
- Read reviews
Peas
- Updated: 25.06.2023
- Read reviews
Sellers Books 2019
- Updated: 14.03.2023
- Read reviews
Delta Bicycle Stands
- Updated: 03.06.2023
- Read reviews