7 best cycle pumps

• Constant Pressure pump control valve that automatically adjusts pump output to match variable demand.
• As your demands vary, the CSV reacts to changes in pressure and opens and closes accordingly.
• Able to deliver strong, constant pressure in a compact and easy to install unit.

User questions & answers

Question:	Do any of you see an increase in your power bill when using csv? i'm comparing the startup energy reduction to the lower pump efficiency at low flow
Answer:	360 Watts
Question:	I have 2 check valves, one near my well pump and the other by my pressure tank are they both needed
Answer:	20 seconds if that
Question:	how cn i talk to suppier please iv your number
Answer:	1/4"
Question:	does the water flow both ways thru the cycle stop valve
Answer:	The base is 3.75" X 3.75" and the lip at the top is 4" X 4"
Question:	What is the size of this sticker
Answer:	Yes. I will be ordering more of this product.
Question:	is this a sticker with clear borders or a real decal you apply by placing face down and scratching off
Answer:	Yes

Product features

Cycle Stop Valves

This diagram shows the difference between a system with a Cycle Stop Valve (top) and a system without a Cycle Stop Valve (bottom.) The Cycle Stop Valve delivers constant pressure while eliminating water hammer and reducing stress to pump.

PK1A Pside-Kick

The Pside-Kick is the most user friendly complete constant pressure pump control kit available. Use in systems with up to 25 gpm capability and a wide range of flow demands. Eliminates the need for large pressure tanks. The Pside-Kick is also a reliable, economical replacement for variable speed controllers.

CSV1A / CSV2W1.25

The Cycle Stop Valve model CSV1A and CSV2W are pump control valves that automatically adjust pump output to match your variable demands. As your demands vary, the CSV reacts to changes in pressure and opens and closes accordingly. This enables it to hold a constant pressure as long as your demand is more than the minimum control flow of 1 or 5 gpm depending on the model your choose (1A-1gpm, 2W-1 or 5gpm) .

26 GPM and Higher Systems

These models (T shaped valves) also have a reduced pressure fall off function. If you demand more than your pump can provide at the pressure the valve is trying to hold, the valve will stop actuating at all and open fully. Your system pressure will become whatever pressure the pump can build at that point.

Cycle Sensor Pump Monitor

The Cycle Sensor is a system monitor that detects Rapid Cycle and Dry Run and reacts to either of these conditions by shutting down the pump. It does not control or prevent rapid cycle or dry run but protects your pump in the event these problems occur.

CSV125-3

The CYCLE STOP VALVE model CSV125-3 is a pump control valve that automatically adjusts your pump to match your variable demands. This enables it to hold a constant pressure as long as your demand is more than the minimum control flow of 1 or 3 gpm depending on the model you choose. (CSV125-1 or CSV125-3).

CSV125-1

The CYCLE STOP VALVE model CSV125 is a pump control valve that automatically adjusts your pump to match your variable demands. As your demands vary, the CSV reacts to the changes in pressure and opens and closes accordingly.

• We have 2 similar parts: Z93(ASIN: B07DGWMVHY) and Z136 ( ASIN: B07J5L8WM4). The directions of the outlet and inlet of 2 parts are different . This part is Z93. If the directions of the outlet and inlet of your part are different with this one , buy Z136 in our store.
• Compatible with EZGO 1989-1990.5 2-cycle engines. Mounts to engine.
• Compatible with EZGO Marathon 2-cycle golf carts from 1982 1983 1984 1985 1986 1987 1988 .
• Do not work on any other models or 4-cycle carts . Compatible with 24233G1 ;
• Note: This item is a replacement part. Not OEM part. Please make sure the images are the same with what you want. If not, please do not purchase it even your model is in the described list!

Product features

We have 2 similar parts: Z93 (A S I N: B07DGWMVHY ) and Z136 ( A S I N : B07J5L8WM4 ).

The directions of the outlet and inlet of 2 parts are different.

This part is Z93.

If the directions of the outlet and inlet of your part are different from this one ,

buy Z136: search with “ B07J5L8WM4 “ Or “ Z136 ” in our store.

We mark size of part to help you make decision.

Compare pictures with your original part carefully.

If not same, do not buy it.

Compatible with 24233G1

Compatible with EZGO 1989-1990.5 2-cycle engines. Mounts to engine.

Compatible with EZGO Marathon 2-cycle golf carts from 1982 1983 1984 1985 1986 1987 1988

Do not work on any other models or 4-cycle carts

• 【DURABLE & EASY TO CARRY】 - ID MAX portable bike pump is made of superior quality aluminum alloy and small enough to easily put in the bike bag or fix on the bike frame with the mounting bracket. This mini bike floor pump is a powerful lightweight bicycle floor pumps you must have;
• 【DUAL VALVE DESIGN】 - This mini portable bike pump's Valve head can easily switch between Presta and Schrader style valves for ease of use with both kinds of bicycle tires;
• 【HANDLE AND FOOT PEDAL DESIGN】- Foldable handle and foot pedal design,adds friction prevent lose balance,make it easy to pump. Oversized air cylinder enables ID MAX bike floor pump to reduce 20% inflating time compared to conventional mini bike pump;
• 【EASY TO USE】 - Aluminum barrel with ergonomically designed comfortable handle, dual action pumping and thumb lock, up to 130 psi capacity that allows you to use this floor pump to inflate the bike tire from flat during emergencies repair or keep the tire pressure up during the long rides. This mini bike pump also comes with inflation needle, you also can inflating for sports balls;
• 【WIDELY COMPLICATION】- The mini pump with sports ball Needle, which can easily inflate some children's toys, bicycles, swimming rings, basketball, volleyballs, soccer, yoga ball, balloons, life-buoy, hovercraft and other inflatable ball toys, Also ideal for mountain & road bikes, electric bicycles, strollers, wheelchairs and so on.

User questions & answers

Question:	How does the mounting bracket attach to the bike frame
Answer:	Was very easy to attach in place but nemember to scratch surface to bare metal, then it stck very well, stay in place and seal the hole. Very easy to use, I like it.
Question:	How does the pump actually mount to the bike frame
Answer:	For best results you want to make sure the gas tank is totally empty and totally dry so that the epoxy can adhere to the metal if it's wet it won't adhere to it well at all
Question:	Does the pump have a pressure gauge
Answer:	I used this to seal a hole chewed (by a squirrel) in the top of my Craftsman snowblower fuel tank. It bonded to the plastic tank and sealed it completely.
Question:	Does it have any warranty? If yes, how long
Answer:	Sorry to tell you we just have this length now. Max lift height of 38ft of single line, 19ft of double line;

Product features

Foldable Mini Bike Pump

- Presta and Schrader compatible;

- Superior quality durable aluminum alloy;

- Foldable handle design, small size, equipped with mounting bracket for easy carrying;

- With foot pedal design, non-slip and makes it easy to pump;

- Compact and lightweight bike pump - only 12.4 inches long and 0.42lbs;

- High pressure barrel - 130Psi.

135° Rotation T-Handle

Ergonomic 135° rotation T handle, it's very convenient to storage. According to the different needs of air pumping and storage, the handle can be rotated up and down 135°.

Foldable Design

When use the pump, open the handle, pull out the inflatable mouth, the bike pump handle rotates 90° to the parallel state; when you finished pumping, let the handle become a straight line with the pump body, then push in the inflatable mouth to the handle.

Stable Pedal

Non-slip pedal design at the bottom to prevent sliding during air pumping. and the foldable pedal design is space saving and convenient to carry.

Portable Size

Small and foldable size and lightweight, easy to carry and use.

Widely Applications:

Compatible with Universal Presta and Schrader valves, IDMAX portable mini bike pump can inflate for bicycles, electric vehicles, air cushion, swimming ring, basketball, football, life buoy, air bed, and any inflatable balls toys.

• Special Pump Head - This superior pump head is the easiest to use on tires with both Presta and Schrader valves! No Adapters. Needn't Switch. No fiddling of any kind! Instantly switch from Road & Mountain Bike tires to CycloCross, Cruiser, & Hybrids. *KINDLY NOTE: This pump doesn't have pressure gauge and comes in pieces, please assemble according to the picture on the page.
• High Pressure Anti-leak System - Inflate your tires fast and safely with our tough, leak-resistant system. The high-efficiency pump puts the maximum air into your tires with every stroke, reducing downtime.
• Perfect universal tool - a must-have for each garage tool box! Multipurpose bike mini pump - with 2 BONUS adapters - for pumping different types of balls, inflatable pools and toys, pool floats, balloons, air mattresses, baby buggies, strollers and wheelchairs.
• Ultra lightweight - It is almost weightless (only 220g) and extremely compact that can be attached to the bike frame under the water bottle cage
• Easy Pumping - Ergonomic T-handle provides 'Great Grip and Pushing Power'. Stainless steel foot peg stabilizes the pump on the ground creating a comfortable and efficient pumping motion.

User questions & answers

Question:	How long is the hose
Answer:	No smartphone is required to use or operate the WellBe Smartwatch. A smartphone or tablet is only needed to register the device with our WellBe Virtual Assistant App, this is a one-time event and can be done remotely by a family member, friend, or caregiver from anywhere. Once registered WellBe Smartwatch operates completely independent of any smartphone. It is equipped with its own 4G sim card allowing the user to speak with emergency response directly through the smartwatch.
Question:	My pump has a t shaped valve. what is the procedure for switching from presta to schrader valve? i can not seem to get it to work
Answer:	The watch dials our US-based emergency monitoring center which will dispatch first responders to your location in an emergency. You can speak directly with emergency support through the watch.

Product features

Great Experience

• High Strength: All-in-one seamless metal cylinder, high strength.
• Ergonomics: Ergonomic grip handle, easy and comfortable.
• Applicable to All Gas Nozzle: Presta and Schrader valves, no need to switch.
• Super Long Lifespan: Cast iron base, long lifespan.

Step 1

Package comes in three parts:

1- The bike pump body

2- The round cover

3- The handle

Step 2

Put 2- the round cover onto the top of 1- the bike pump body and press it.

Step 3

Stick the end of 3- the handle into the hole on the top of 1- the bike pump body and screw it up.

Find the proper hole for your valve

This super convenient bike floor pump is compatible with both Presta and Schrader valves. Find the proper hole for the valve of your bike. The thinner one is for Presta valve(French valve) and the thicker one is for Schrader valve(American valve).

Pull down the trigger to lock the pump

Put the valve into the correct hole and pull down the trigger to transform status 1 to status 2. Now the pump is locked and you can pump the tire.

Multifunction needles

Three little parts attached to the end of the hose are for multifunctional uses. You can pump basketballs, soccer balls, etc. The way to use them is similar to pumping the tires: find the proper needle, put it into the hole and then pull down the trigger to lock it. Now you can use it.

Super Portable Size & Ultra Lightweight

Size: 12.6" long and 5.12" wide. Weight: 220g.

It's very easy and convenient to take this bike pump with you on a road trip. It's small but complete, enough to support your road trip.

Product description

TOOLITIN 20 YEATRS,JUST TO LET YOU HAVE THE BEST PRODUCT EXPERIENCE



Anti-slip Collapsible Pedal,foldable foot rests:

Bump anti-slip pedal design makes the bicycle pump more stable.

Foldable foot rest for the smallest size of pump,easy to carry in your backpack or luggage.



High quality rubber tube:

The tire pump’s rubber tube is Frost proof and high temperature resistance, long service life, strong and durable.

not easy to tear, strong toughness, not easy to be stiff.

Press down the pedal gently, put down the steel ring,the bicycle pump reaches the stretchy



If you are a cycling enthusiast,this bicycle floor pump will be an indispensable item in your emergency package.

Of course, in additon to riding,the bike tire pump can still be used to inflate football,swimming laps, etc.



Package include:

1 X Mini Bike Pump（NO GAUGE）

1 X Parts Box

（Box include 1 X Ball Needle,2 X Inflatable Device）

• * A COOL REMOVABLE PARTS BOX *: Toolitin bicycle pump are made of a unique carrying case design,the ball needle and two inflatable device are placed in this carrying case, instead of being stuck in the base like an ordinary air pump,more convenient and not easy to leave behind
• * MULTIFUNCTIONAL&COMPATIBLE VALVES *: Compatible to presta and schrader valve.Our bicycle tire inflator has a 2-in-1 American and French specification air nozzle kit.No harassment to convert components.The thumb lock ensures a tight seal and no air leakage .
• * FOOT ACTIVATED AIR PUMP *: Anti-slip retractable pedals and cast-iron base makes this portable bicycle pump more stable and less slippery.High pressure,a small body bursts into great energy,up to 90psi,fast inflating and saving time
• * SMALL SIZE&EASY TO CARRY * : Toolitin Bike floor pump inner anouter tubes is made of Iron material,More wear-resistant and weight savings.it's mini-sized and as tall as iphone 6P,easily fit in your bike bag and you can take it outside anywhere and anytime.At the same time, the surface of our mini pump is sprayed with high-temperature anti-rust paint. This spray paint process will not fall off and effectively prevent corrosion.
• * Widely Applications *: There are extra needles and valves in the packaging of this air bike pump.The needle can help pump up balls, swimming rings, inflating boats, etc. The bike tire pump can not only pump up bikes, but also motorcycles or even a car (for emergency).

User questions & answers

Question:	Is the body of the pump easy to deform
Answer:	I have received this pump. It is heavy and should not deform easily.
Question:	Does this pump fit presta valves
Answer:	Dear,our bike floor pump is fit presta valves,compare with other model, they are in an removable box.
Question:	It looks like it would tip over when using, how well does that foot stand help steady it
Answer:	It works fine, but you have to stand on the metal foot stand thing, while pumping with your other foot. As such, it is almost a requirement that you have something to steady yourself on while pumping. A bike rack, handrail or wall work well in this regard, although the bike itself will work ok if nothing else is available. If you can't steady yourself on anything, you can still use the pump, but it becomes a lot slower.
Question:	Can you use this on a car tire
Answer:	I don't think so, it's too difficult. If it is used for car tires, you need to buy a higher pressure air compressor. This pump is only suitable for bicycles, balls, toys,life buoys, etc.

Product features

Toolitin bike floor pump

The bike pump can be compressible folded,so it will be easy to carry and storage.Aluminum alloy + iron material let this pump solid and durable,will safe for you.Compere with the normal bike pump, the parts of extra gas needle and valve are add in one box,it will be easy for carry.

Product description

You were all ready to go for a ride and... darn it if you tire doesn't need a little more air. No worries, you have the Schwinn Air Center Plus Floor Pump. Sure, there are plenty of bike pumps out there, but the Air Center Plus has several key features that make it a great asset when you're in a pinch. There is a wide metal base that keeps it stable and an indicator-style pump head that takes the guess work out of wondering if the pump head is truly attached to the valve. When the handle is up the window is green, meaning it is ready to pump. When the handle is down, the window is red, meaning it isn't ready to pump. Easy, right? You have the option of a Presta or Schrader valve so all the bikes in the family are covered. With a pump, the height of the barrel is equal to the capacity, which is how much air the pump can push into the tire per pump. With a 21.5-inch barrel height and a 38mm diameter steel barrel, you'll get a nice gust of air with each pump, which means fewer pumps for a fully-inflated tire. There are molded handles for comfort, a convenient mid-level top view gauge that pumps to 120 PSI, and an included sports ball needle and inflation cone for all your pumping needs. Nothing is holding you back, enjoy the ride with a Schwinn.

• Dual easy indicator pump head fits both Shrader and Presta valves indicator is green when locked and ready to use and red when it's not
• Wide metal base adds stability for easy pumping and adds long lasting durability
• 38mm diameter high volume steel barrel is 21 inch high to offer premium performance
• Pumps to 120 PSI co molded T handle grips make inflation comfortable
• Sports ball needle and inflation cone included for added versatility

User questions & answers

Question:	Where can I purchase replacement tips
Answer:	Check online
Question:	Is there a hose extension that I could buy with this
Answer:	The pump is designed as one unit with the standard hose. You may be able to reach out to a local bike or skate shop for some possibilities. Thanks, Nicole
Question:	When you plug the nozzle into the valve, does it show you the pre existing pressure inside the tire
Answer:	Not necessarily. When you go to press it on done sir is released. But within 1 pump you will see the existing air pressure in the tube right away.
Question:	Is the base made of steel or is it plastic with chrome finish
Answer:	The base is chrome plated steel or white metal. Decent unit.

Product features

Schwinn Air Center Floor Pump Line

The Air Center Plus has a wide metal base that keeps it stable and an indicator-style pump head that takes the guess work out of wondering if the pump head is truly attached to the valve. When the handle is up the window is green, meaning it is ready to pump. When the handle is down, the window is red, meaning it isn't ready to pump. Easy, right? You have the option of a Presta or Schrader valve so all the bikes in the family are covered.

An American Icon

Founded in 1895 in Chicago, Illinois, the Schwinn mission has been to develop bicycles that allow people to experience the confidence and freedom that comes from riding a bike.

Over the last century, the bicycles, designs, and riders have evolved, but our commitment to the Schwinn mission has remained strong. Schwinn is excited to be on this journey with you.

As we continue to build upon our heritage of being America’s most loved bicycle brand; we look forward to another century of sharing our bicycles with explorers of all ages. You can trust that you have our continued dedication to the quality and innovation that has become synonymous with the Schwinn name.

Let’s go!

• Foot Activated Bicycle Pump: anti-slip retractable pedals and cast-iron base makes this bike pump more stable and less slippery when inflating. High pressure,fast inflating and saving time
• Multifunctional Twin Valves: newly designed valve head can easily switch between presta and schrader valves and without any air leaks. The tire pump can inflate for bicycles, electric vehicles, motorcycles, sports balls and swimming rings
• Lightweight and mini: aluminium alloy bicycle pump barrel, the bike floor pump is small enough to easily fit in your bike bag too. You will be able to deal with a flat tire outside anywhere and anytime. Mini bike floor pump is one of the most powerful lightweight bicycle floor pumps available
• Portable Inflator Pump Material: aluminum alloy, more durable and compact than those plastic ones. The structure is well-designed, each part is user-friendly, such as the anti-slip base and pedal, replaceable freeze & heat-resistant tube
• 100% Satisfaction Guarantee: If you are not completely satisfied with our mini bicycle pump, we are willing to either provide a refund or a replacement within 24 hours

Product features

MULTIFUNCTIONAL BIKE PUMP

• The Characteristic of Bike Air Pump
• 1, Lightweight, aluminum alloy material
• 2, Twin Valves, fits universal presta and schrader
• 3, Mini, 17.3cm length, 8.8cm width
• 4, Foot Activated Bike Pump, high pressure, save time
• 5, Bonus: a ball valve and a gas needle