11 best hitch mount 4 bike rack

Product description

Deluxe 4-Bike Hitch Mounted Carrier

• 4 bike rack fits vehicles with a 2 inch trailer hitch only. Vehicle will require professionally installed Class III or IV 2 inches hitch to use this product
• 22 inch long carry arms individually secure bicycles with Allen's patented tie down system
• Rack sets up and installs in less than 5 minutes; Included no wobble bolt secures rack inside of receiver hitch with a movement free installation
• Allen's warranty does not cover items purchased through third-party sellers

User questions & answers

Question:	what is the pin size
Answer:	Don't know but make sure you are inserting into a 2" hitch..... think they are all the same size.
Question:	how do you put a womens bike on this rack
Answer:	Our bike rack is black.
Question:	What's the best way to lock bikes to this rack? I've never used a hitch rack before
Answer:	the lowest point at the back of the rack is 4.75 inches higher than the bottom of the tube that goes into the car hitch
Question:	What's the distance between the two carry arms (the ends of the arms
Answer:	None of our racks are approved for use on a trailer mounted receiver hitch. Any trailer or trailered vehicle (including 5th wheel type) has a slight side to side motion that's very low frequency (1 to 1-1/2 times per second) that fatigues the steel from which the racks are manufactured. The fatigue first happens at a molecular level, but eventually (several thousands of cycles later) a visible crack will appear. Once the crack has formed, it will enlarge, finally to the point where the rack drops off the vehicle and the rack (and bikes) impact the roadway. This is also a dangerous situation for whoever may be following the trailer on the highway. We have seen 100+ incidents where the consumers/end user has not taken this advice and suffered disastrous results. I've even had phone calls from consumers who said they read that advice (do not use on a trailer) and ignored it, only to discover a tragic end result. So . . . don't do it. If you insist on doing it regardless of the above, please use some other companies’ rack.

Product features

Deluxe 4-Bike Hitch Mount

Carry up to four bicycles on road trips or camping excursions with the Allen four-bike carrier hitch. The hitch insert--which fits 2-inch receiver hitches--is easy to operate and super secure for your bikes. Just attach it to your hitch, then use the tie-down cradle system to individually secure and protect the bikes. The carry arm accommodates a wide range of frame sizes and designs, so you can carry your kid-size mountain bike or adult road bike with equal confidence. And you don't have to remove your bikes to access the back of your truck or SUV, as the rack tilts back for easy lift-gate access and folds out of the way completely when not in use. Also equipped with a no-wobble bolt to keep the rack from moving inside the hitch, the four-bike carrier is colored with a black powder-coated finish.

Quick assembly and easy install

With only three bolts needed to assemble your Allen Deluxe Hitch Rack, your rack will be out of the box and have you on the road in minutes.

Folding carry arms

The carry arms on your rack can be easily folded down out of the way when not in use. This allows for greater flexibility in using your vehicle with the rack installed.

Individual Tie-Down System

Allen's individual tie-down system secures and protects your bicycles. The tie-downs are fixed in position on the carry arm, but rotate so that the can engage a wide range of bicycle frame sizes and styles.

Tilt-away main mast

The main mast on the rack can be quickly tilted back fro easy lift gate access when the rack is in place on your vehicle.

No-wobble hitch installation

Allen Deluxe Hitch Racks include the hardware to securely install the rack into your receiver hitch. The included No-Wobble Bolt will allow you to fully tighten the rack in place.

About Allen Sports

Richard Allen (pictured left in 1972) started Allen Sports in his garage in 1967. Since its founding, the company has been committed to producing the highest-quality, easiest-to-use bike racks and bicycle-related products on the market. Allen, a onetime aerospace engineer, opened Allen Sports after building a prototype bike carrier in his Lincoln, Massachusetts shop in his free time. The first-ever trunk-mounted bicycle carrier made of electrical conduit, metal strapping, and fire hose casings (for padding) was refined on weekend excursions to Cape Cod. Shortly afterward, Allen took his design to market, and by 1971 had established a national presence for his product.

Today, the family-owned company owns more than three dozen patents, operates four warehouses nationally, six factories abroad, and sells products in countries around the world including USA, Mexico, Canada, and China.

• Securely transport up to 4 bikes (max load 35lbs per bike) with this lightweight platform hitch carrier. Includes locking threaded hitch pin.
• Each bicycle sits in a movable wheel tray and uses Ratchet straps to secure the wheels. The adjustable centre post has a sliding and rotating attachment cradle that is used to secure the bikes frame
• Folds up flat against the car when not in use. Ideal for storage or when parking in a garage
• Fits 2" hitch receivers only. Not to be used with a 1-1/4"-2" Hitch receiver Adapter. Not to be used on a trailer or towed vehicle.
• With a max wheelbase of 48" And max tire width of 3", This lightweight rack accommodates most kids bicycles, ladies frames, Hybrids, road, and mountain bikes

Product features

Ratchet Frame Holders

Ratcheting hooks on center mast add an extra securing point to protect your bike from wobbles or shakes.

Folds-Up Vertically

This bike rack folds up vertically to make it easier to carry and store it and even easier to drive around when bikes aren't loaded.

Locking Hitch Pin

Keyed-alike hitch lock and frame hooks secure rack to vehicle and bikes to rack

Ratchet Wheel Holders

Ratchet wheel holders reduce slipping and movement eliminating the wobbling of your bikes while driving.

Product description

About Swagman

"Ride, paddle, explore: seek your adventure"

That philosophy was the intention of founders Jim and Jan Morris who saw an opportunity to create a better way to transport your bike back in the early 90’s. Swagman was one of the first companies worldwide to design and market a hitch style bike rack. Over the years, that small bike rack company based in the Okanagan Valley of British Columbia grew to include numerous other ground breaking designs in the North American Bicycle, RV and Automobile markets.

The XC Cross-Country 2-Bike Hitch Mount Rack from Swagman is a versatile hitch-mount rack that can easily accommodate children's and adult bikes, downhill bikes, cruiser bikes, full-suspension bikes, BMX bikes, "Y" frame designs, and much more (and without the hassle of removing wheels). The XC slides into a two-inch receiver and carries up to two bikes.

Swagman's XC Cross-Country 2-Bike Rack easily adjusts to accommodate a wide variety of bike frames.

The XC easily adjusts to different bike frame sizes with the simple movement of the wheel hoops. Its frame grip arms feature a soft, frame-friendly coating to protect your bike's finish. When not in use, the rack folds up for easy storage.

Specifications:

• Capacity: Two bikes
• Mount: 2-inch hitch
• Hitch: Fits Class 3 hitch

• EASY TO ASSEMBLE & USE: Only takes a few minutes to assemble and the upright ratchet arms easily adjusts to different bike frame sizes, will accommodate bike frames up to 59 cm (23.2")
• KEEPS YOUR BIKE STABLE: Sturdy design includes a built in anti-wobble hitch device to keep bikes in place
• SAVES YOU STORAGE SPACE: Rack folds easily in to compact mode so that you can conveniently store when done using it
• VERSATILE: Easily transports up to 2 bikes and is compatible with 1-1/4" and 2" receiver Hitch. Maximum weight capacity is 35Ibs per bike and fits 20" to 29" tire sizes
• ACCESSORIES SOLD SEPARATELY: Fat tire wheel trays (64674), 1/2" Locking Hitch Pin (64029) or 1/2" Locking Hitch Pin and Security Cable (64031)

User questions & answers

Question:	Do I need to buy a torque wrench to be able to get the rack tight on the hitch
Answer:	Fits any vehicle with a 2 inch hitch
Question:	we have a 5th wheel camper with a 2" receiver hitch mounted on the frame not the bumper. Will this rack work for us
Answer:	Could you please measure the length between the round tube interface and the end of the spare tire？This part of our carrier is 8inch. If longer than 8inch, it’s necessary to install a extender. And our carrier can fit 2" hitch receiver (tow bar). If you have any other needs, please visit the IKURAM web site and contact us. I will send picture to help you solve your problem.
Question:	Does it have a locking mechanism
Answer:	As long as it has a 2 inch receiver
Question:	I have a Toyota where the spare is mounted on the back. Will this work with the spare tire in place
Answer:	I'm going to answer this as Best I can without getting Angry . First off - The Bike Rack has a 2 Inch Mount and your going to try and plug it in to a 1 1/2 " Receiver . Think about that for a moment ..... It's a NO

Product features

XC2

This bike carrier provides a stress-free way to transport your bikes. Each bike is secured at both wheels and at the frame providing a more stable and safe ride. Cushioned hooks are adjustable for different sized bikes and ratchet down for a tight fit.

About Swagman

Swagman designs products that can be trusted to get your equipment to it's destination; the trailhead, the bike shop, to your race, your first ride; or to the best ride of your life.

Our products are always evolving to meet the demands of the bike and automobile world. Our mission is to make your life easier and more convenient so that you can focus on the sport that you love.

Our company is made up of outdoor enthusiasts just like you and we understand the necessity of relying on a rack to get your bikes safely to your destination.

Find the perfect rack for your ride!

Product description

About Swagman

"Ride, paddle, explore: seek your adventure"

That philosophy was the intention of founders Jim and Jan Morris who saw an opportunity to create a better way to transport your bike back in the early 90’s. Swagman was one of the first companies worldwide to design and market a hitch style bike rack. Over the years, that small bike rack company based in the Okanagan Valley of British Columbia grew to include numerous other ground breaking designs in the North American Bicycle, RV and Automobile markets.

The XTC Cross-Country 2-Bike Rack is designed to make it easy to carry two bikes securely on your car's hitch with no risk of bike-on-car, or bike-on-bike damage. Thanks to a built-in anti-wobble device, the platform-style rack secures solidly to 2 or 1.25-inch hitches. To load the bikes, simply lift them into the wheel platforms, secure the wheels with the integrated wheel straps, and secure the grip arms over the frames. With push button ratcheting arms and sliding wheel platforms, the rack provides a custom fit for bikes with 20 to 29-inch wheels and can accommodate multiple frame types. The soft frame-friendly coating on the grip arms, ensures that your bikes' finishes remain unmarred. In comparison to roof mounted bike racks that generally require you to remove the bike's front wheel and hitch-mounted cradle carriers that don't support the bikes from the base, the XTC Cross-Country is easy to use and worry free. Whether your rack is fully loaded or not in use, the rack provides ready access to your car's trunk. The rack folds up for easy storage when not in use and the center arm folds down to allow access to the rear of vehicle without removing the rack. Built to last, the XTC Cross-Country 2-Bike Rack carries a limited lifetime warranty from Swagman.

Please note: an optional locking hitch pin and 10-millimeter security cable can be used with this rack and are sold separately.

• EASY TO ASSEMBLE: The XTC2 hitch mount bike rack only takes a few minutes to assemble following the instructions. Once installed, simply place your bikes on the rack and start cruising to your destination
• SAVES YOU STORAGE SPACE: Rack folds easily so that you can conveniently store when you are done using it
• WORRY FREE SECURITY: Have peace of mind knowing that your bikes are protected with locking ratchet hooks and locking hitch pin
• VERSATILE: Easily transports up to 2 bikes and is compatible with a Class 2 or higher, 1- 1/4" and 2" hitch receiver. Fits most frame sizes, shapes and style (fits 12" to 29" tire sizes). Maximum weight capacity of 35Ibs. per bike

User questions & answers

Question:	I notice they have a anti wobble hitch pen as being frequently bought together, does it not come with one for the anti wobble device it says it comes with
Answer:	I use my prime
Question:	I use the 1.25 receiver and my bike sways all over the place. Tried tightening all the parts on the underside and it helped just a little. Would the anti-rattle bolt help
Answer:	if you bought the right one for your bike it should fit I bought a aftermarket not h.d. mine went on nicely
Question:	Clearwater, FL police told me we need to put the license plate on the bike rack itself, that there are ways to do it. Anybody know how
Answer:	No it won’t
Question:	I'm not good at, well, mechanics or whatever you call loading bikes on bike racks. Or bike racks on hitches. Nor am I super strong. Thoughts
Answer:	the docking hardware is for a quick detach setup, if you don't already have the quick detach lugs on your scooter now, you will have to order that accessory seperately.

Product features

XTC2

This convenient bike rack is user friendly and easy to install. The wheel-mount was designed so that you don't have to take off your wheels, an you can lift the bike up onto the rack without a ton of effort. Rest the bike's wheels into the wheel hoops, ratchet down the hooks and you're ready to go.

About Swagman

Swagman designs products that can be trusted to get your equipment to it's destination; the trailhead, the bike shop, to your race, your first ride; or to the best ride of your life.

Our products are always evolving to meet the demands of the bike and automobile world. Our mission is to make your life easier and more convenient so that you can focus on the sport that you love.

Our company is made up of outdoor enthusiasts just like you and we understand the necessity of relying on a rack to get your bikes safely to your destination.

Find the perfect rack for your ride!

Product description

Our MaxxHaul 2-Arm Style Bike Rack can transport up to 4 bikes safely and securely. Handy swing down features provide easy access to the rear of your vehicle without removing bike rack. Designed to fit standard 2" Class III and Class IV hitch receivers. Equipped with two 22" long carry arms to individually secure bikes on cradles with a tie-down strap system. Rack will set up and install in minutes. Durable heavy duty all steel frame construction with black powder coat finish to resist corrosion. Comes with safety reflector stickers for increased safety.

• 2-arm style bike rack can transport up to 4 bikes safely and securely
• Handy swing down feature provide easy access to the rear of your vehicle without removing bike rack.
• Arms fold down for compact transport and storage.
• Designed to fit standard 2" Class III and Class IV hitch receivers.
• Equipped with two 22" long carry arms to individually secure bikes on cradles with a tie-down strap system.
• Rack will set up and install In minutes.
• Durable heavy duty all steel frame construction with black powder coat finish to resist corrosion.
• Comes with safety reflector stickers for increased safety and hitch pins.

Product features

Securely Transport Up To 4 Bikes

Durable Heavy Duty All-Steel Frame

Our MaxxHaul 2-Arm Bike Rack can transport up to 4 bikes safely and securely

Fast & Easy Installation

Our MaxxHaul 2-Arm 4-Bike Rack will set up and install in minutes!

Safety & Quality

Our MaxxHaul 2-Arm 4-Bike rack is equipped with two 22" long carry arms to individually secure bikes on cradles with a tie-down strap system

• EXTRA HEAVY DUTY: Safety is the 1st priority. The rack passed the most strict tests which include driving, pulling, vibration and swinging tests. TUV Test Standard PASSED: With 1.5 times of max load weight, no bending or cracks after testing. ( NOT for RV )
• PLATFORM CARRIER: Much Easier to put your bicycles on than clamp holder, and compatible with all kind of bicycles. The bike is securely sitting in the tire holders, so no heavy load on the top tube compared with other carriers. No more swinging handlebar and spinning wheels which may cause scratches on car or bike.
• ADJUSTABLE FOAM PROTECTOR: There's an adjustable foam protector to prevent scratching or hitting of bicycles.
• FOLDABLE: The arms could be folded for you to access the car rear boot or easy storage when not in use. 4 BIKE RACK , 2" HITCH Weight: 35.5Kg = 78.26lbs, Max Load: 20kg or 45lbs per bike.
• Lifetime warranty: We are so confident with our product quality, so we can offer lifetime warranty. If you are not happy with the products, replacement or refund could be given. Peace of mind: Our product liability insurance covers up to 2 million for each claim.

User questions & answers

Question:	If you get the 4 bike rack can it be seperated if you are not traveling with all 4 bikes
Answer:	Yes they fit 16oz solo cups
Question:	Can you make this 2 bike set up and 4 bike set up
Answer:	I don't see why not. To me, this would be small for a lake, but it is very doable.
Question:	How much does it weigh
Answer:	of course, Tips: When children play in the water, adults must accompany.
Question:	Title says 1.25" or 2" hitch but then says 2" hitch everywhere else? Can it be used in a 1.25" hitch
Answer:	Its suppose to come with rings.

Product features

4 BIKE RACK , 2" HITCH Bike Carrier

EXTRA HEAVY DUTY: Safety is the 1st priority. The rack passed the most strict tests which include driving, pulling, vibration and swinging tests. TUV Test Standard PASSED: With 1.5 times of max load weight, no bending or cracks after testing.

PLATFORM CARRIER: Much Easier to put your bicycles on than clamp holder, and compatible with all kind of bicycles. The bike is securely sitting in the tire holders, so no heavy load on the top tube compared with other carriers. No more swinging handlebar and spinning wheels which may cause scratches on car or bike.

ADJUSTABLE FOAM PROTECTOR: There's an adjustable foam protector to prevent scratching or hitting of bicycles.

FOLDABLE: The arms could be folded for you to access the car rear boot or easy storage when not in use. 4 BIKE RACK , 2" HITCH Weight: 35.5Kg = 78.26lbs, Max Load: 20kg or 45lbs per bike.

Keep Enough Space

Raised rack to keep enough space when passing speed bumps or driving on steep hills. Warning: Please do not use the rack for off road.

Secure Tire Holders

Adjustable positions ensures secure holding.

Foam Protected

Protect the frames.

BICYCLE EXPERTS

We design and develop premium bicycle parts and accessories

WIDE SELECTION

With more than 2000 high quality and best value products, you will always find what you need.

SOURCING TOP PRODUCTS

All the products we stock are carefully selected from leading factories in the cycling industry.

PRODUCT VIDEOS

Our team are working hard to try add videos of all the products we are selling. This will allow customers to have a visual image of the products and learn how to use it before purchasing.

• Quickly set carry arms "snap" into place right out of the box.Double lever quick release tilting design makes the rear cargo and luggage easy to access, and allows for carrying the bike down.The bike rack can be folded up when not in use.
• Sturdy all-steel bike rack: Durable all-steel structure with protective powder paint finish.No wobble bolt(s) to eliminate the movement of rack inside of hitch
• Adjustable saddle, wide range of application, spacing can be adapted to various frame size and design of the bicycle.Once the mounting saddle is in place, make sure the mounting saddle is tight enough to prevent the bike from falling off the frame
• Support 4 bikes, and keep them safe with the hook pin locking system tilted, rear reflectors to increase visibility.Optimized two-arm bike frame and adjustable mounting saddle, spacing can be adapted to a variety of frame sizes and design of the bike, more stable
• A limited lifetime warranty.All X-Bull bike racks are supported by professional consulting services and warranty.

User questions & answers

Question:	Is this rack RV certified
Answer:	sure,If the interface size is appropriate
Question:	Would it work on a Corolla
Answer:	If you have a hitch receiver (2”), then yes. When you tilt it forward you should also be able to open your trunk easily
Question:	How much weight will it carry
Answer:	About 170LBS
Question:	Will it hold 4 beach cruisers and not scratch the paint on the bike where it mounts
Answer:	Mine only came with mounts for two bikes. Even if you had enough mounts for four bikes, I don’t think there would be enough room for them all. As for the scratches, it would really depend how far you were hauling them and how many bumps. I hauled mine down a dirt road with some bumps and did receive some rubbing that scuffed they paint.

Product features

X-BULL Value-packed Hanging 4-bike Hitch Rack（ strengthen）

Fitment:

For the bike with top frame bar.

Universal fits for any sedans, hatchbacks, minivans, and SUVs with 2" receiver hitch.

Please measure the distance to make sure have enough clearance to accommodate a spare tire on the cars.

Enjoy and view and the healthy life style

X-BULL ike Rack,suitable for vehicles with a 2inch trailer hitch.Go outside for riding and travelling with your bicycles on your car.

• Fit almost any style of bike using a universal top clamp and adjustable wheel holders. Easy Folding platform-style hitch rack holds up to 4 bikes, 50 lbs each, and fits 2-inch hitch receivers only. Security cable is not included.
• Fold Up Design - Easily fold up the rack when not in use. [*Overall Dimension: 56-1/2"(W) x 49"(L) x 32-1/4"(H) *Folded Size: 9-1/2"(W) x 49"(L) x 32-1/4"(H)]
• Multifunction Design - Easy folding platform-style hitch rack can be used as either a 2-bike or a 4-bike carrier, Precision-clamping, cushioned hooks slide along upright masts for quick, easy bike loading and unloading. Hooks move independently of one another to accommodate bikes of same or differing heights.
• Heavy Duty - Made of heavy duty steel. Rust-resistant, sturdy steel construction with black powder coat finish.
• About Installation - Instruction is included. Hardware shown in the picture is Included. If your items encounter any adaptation or anything-else problems, please give us the opportunity to replace the item/part. We provide technical support at any time, please feel free to tell us what we can do for you, we will reply in 24 hours.

User questions & answers

Question:	How much does the rack weigh without bikes
Answer:	50lbs
Question:	What’s the Return Policy
Answer:	You have to pay return shipping which is about $80.00
Question:	How do you get the first bike between the vehicle and holder
Answer:	You have to lift it in pace and then put the holder down.
Question:	Do the bikes wobble? Is there a stabilizer and lock
Answer:	The bikes do not wobble if you adjust the wheel holders and the top mounts to your bike. There is no stabilizer and lock. This is just a more affordable option than then $700 to $1000 bike carriers. You can lock your bikes to it with a standard bike lock.

Product features

Description

4 Bike Rack Platform is a heavy duty 4 bike capacity rack that will fit almost any style of bike using a universal top clamp and adjustable wheel holders. Simply drop the bike into the wheel holders, then slide the self locking clamp down onto the frame to secure the bike. For ease of use, the 4 comes out of the box set up as a two bike base unit. The bike Rack kit is easily assembled to the base unit and mounting to the hitch. The platform is able to fold up. Security cable is not included. For 2" hitches only.

Description

4 Bike Rack Platform is a heavy duty 4 bike capacity rack that will fit almost any style of bike using a universal top clamp and adjustable wheel holders. Simply drop the bike into the wheel holders, then slide the self locking clamp down onto the frame to secure the bike. For ease of use, the 4 comes out of the box set up as a two bike base unit. The bike Rack kit is easily assembled to the base unit and mounting to the hitch. The platform is able to fold up. Security cable is not included. For 2" hitches only.

Description

4 Bike Rack Platform is a heavy duty 4 bike capacity rack that will fit almost any style of bike using a universal top clamp and adjustable wheel holders. Simply drop the bike into the wheel holders, then slide the self locking clamp down onto the frame to secure the bike. For ease of use, the 4 comes out of the box set up as a two bike base unit. The bike Rack kit is easily assembled to the base unit and mounting to the hitch. The platform is able to fold up. Security cable is not included. For 2" hitches only.

Description

4 Bike Rack Platform is a heavy duty 4 bike capacity rack that will fit almost any style of bike using a universal top clamp and adjustable wheel holders. Simply drop the bike into the wheel holders, then slide the self locking clamp down onto the frame to secure the bike. For ease of use, the 4 comes out of the box set up as a two bike base unit. The bike Rack kit is easily assembled to the base unit and mounting to the hitch. The platform is able to fold up. Security cable is not included. For 2" hitches only.

Easy bike loading

• Hitch-mounted, platform-style rack carries up to 4 bikes on the back of your vehicle
• Precision-clamping, cushioned hooks slide along upright masts for quick, easy bike loading and unloading

Hooks

• Hooks move independently of one another to accommodate bikes of same or differing heights
• Padding protects your bike's finish

Adjustable wheel

• Adjustable wheel mounts accept a variety of wheel sizes and wheelbases
• Arms fold up for compact storage
• Rust-resistant, sturdy steel construction with black powder coat finish

Specification

• Capacity: Four Bikes/200 lbs (max. 50 lbs per bike)
• Hitch Size: 2" only
• Hitch Center to 1st Post: 20"
• Maximum tire width: 3-1/4"
• Assembly Required: Yes
• Folded Size: 9-1/2"(W) x 49"(L) x 32-1/4"(H)
• Overall Dimension: 56-1/2"(W) x 49"(L) x 32-1/4"(H)

Package Include

• 1 x 4-Bike Rack Platform Carrier
• 1 x Hardware Set
• 1 x Instruction

Product description

With the Road-Max Blade-Runner 4, the arm can fold when not in use for gate access. It has a compact and light weight design that allows the user to easily store product in the car trunk. The adjustable padded arm supports the bikes vertically and the strong, easy to use, locking attachment system will fit any 2" receiver. Also includes high resistance wheel straps with zamack buckles and soft pads to fit all rims and tire sizes. This model is able to carry up to 4 bikes.

• With The Road-Max Blade-Runner 4, The Arm Can Fold When Not In Use For Gate Access
• It Has A Compact And Light Weight Design That Allows The User To Easily Store Product In The Car Trunk
• Through Creativity, Productivity And Innovation - This Brand Continues To Develop The Finest Automotive Accessories

User questions & answers

Question:	Can two of the racks be removed when not needed, making it a 2 bike carrier
Answer:	Hi there - these bottles have been updated to have a smooth interior and no longer have the indents inside.
Question:	Can this unit be used on the rear of a travel trailer that has a 2" receiver
Answer:	Hi. I don’t know the diameter but it can easily , perfectly fits in a cup holder . I hope it helps. Thanks.
Question:	Do the horizontal arms that hold the wheels adjust to accommodate smaller or different size bikes
Answer:	Metal. Keeps drinks cold for a long time.
Question:	what is the assembled size of the rack
Answer:	Thank you for your question. It can keep drinks hot for 8 to 12 hours. If you have any more questions, feel free to reach out to us or to the manufacturer at [email protected]

• 【Carrying capacity】 Capable of safely carrying four bicycles, optimized carrier frame spacing provides a wide range of frame dimensions and designs for bicycles, more stable and easily adaptable to four bicycles
• 【Easy to install】 Easy to disassemble and install, Rack sets up and granted entry in less than 5 minutes, fast folding bicycle racks do not use compact transportation and simple storage
• 【Stable and safe】 Bolts firm, swing less, greater flexibility with rack mounting using your vehicle. Easy access to rear vehicles with easy-to-use tilt features
• 【All durable and firm steel structure】Exterior paint is not easy to fall off, strong steel structure, long and durable all steel structure protective powder coating is completed
• 【Lifetime warranty】 All ZESUPER bike carrier racks are backed by professional consulting services and warranty. Vehicle will require professionally installed Class III or IV 2 "hitch to use this product

User questions & answers

Question:	Is the stem a true 2” or is a 1” with a adapter
Answer:	Mitsubishi CVT fluid is a blushish green. When it turns brown, it is time to change it. How many miles since it was changed? Mitsubishi recommends changing the fluid and every 30,000 miles, fluid and FILTERS every 60,000 miles.
Question:	How many pounds the 2 bike Hitch can hold
Answer:	There are actually two filters to change on the Lancer CVT transmission. One that you have to take the lower transmission pan off to get to - it is just below the valve body. The other one is inside the oil cooler housing. Here are the links to them - https://www.amazon.com/dp/B07NY3JH5X https://www.amazon.com/dp/B07R11WCHK
Question:	Weight capacity
Answer:	Thank you for your inquiry. This will not fit the Crosstrek, as they were equipped with either a CVT transmission, or a Manual. Thank you, SPWeStore
Question:	What is the weight limit
Answer:	No it's not synthetic is conventional body pays off big time to change the Fluod by the require intervals indicated in the driver's manual.

Product features

ZESUPER 2-Bike Hitch Mount Bike Rack

When you want to take a trip in a different way, and you have limited space.

The ZESUPER frame makes it possible for you.

Just take 5 minutes to mount your favorite bike onto the frame and begin the relaxing journey.

Heavy all-steel bike racks will easily transport up to 2 bikes.Features a cushioned bike cradle complete with hooks and ring straps to protect the bike.And installed on most standard Class III and Class IV 2-inch receivers.

Folding carry arms

Easy access to rear vehicles with easy-to-use tilt features.With ability to tilt forward and open the lift gate without removing the rack.

Easy to install and carry

Easy to disassemble and install, Rack sets up and granted entry in less than 5 minutes, fast folding bicycle racks.

Compact solid construction

Exterior paint is not easy to fall off, strong steel structure, long and durable all steel structure protective powder coating is completed.

Product description

Compatible with 2" receiver hitches and capable of carrying four bikes, the BUZZRACK Express takes bike transport to a whole new level. A lower level that is, which makes loading bikes easier than ever! The low platform means no overhead lifting and no wheel removal is required to load up to four bikes of almost any frame design or wheel size. Quickly adjust the wheel trays to accommodate women's, kids', road, mountain, full suspension and 29er bikes. Secure the bikes with the no-fuss ratchet straps and upright frame cradles and you're ready to go. After your ride, the platform folds up flat to make parking and storage easier. With features that make bike loading a breeze, you'll be on the road in no time with the BUZZRACK Express!



The rack is not suitable for RVs, Camping cars, trailers, etc.

This rack does not fit fat tire bikes.

The rack is not recommended for use on models of the Ford Flex which have centrally positioned exhaust pipes, due to the risk of burning/melting the bicycle tires and/or wheel supports.



Accessories:

Hitch lock set (B0733BW19R),

Wheel Straps-Length: 492mm /19-3/8" (B0733BXHWN)

Webbing Strap with buckle (B07JGLGDML)



If you have any questions or encounter any issues with your BUZZRACK Rack product, or if you need replacement parts or any other after sales service, don't hesitate to contact us on Amazon using the "Contact Seller" feature, or by using the "Contact Us" tab on our own website.

• Fits 2" receiver hitches and carries up to 4 bikes
• Platform style rack simplifies bike loading--no overhead lifting or wheel removal required
• Movable wheel trays with ratcheting straps and padded upright cradles secure bikes for travel
• Rack folds flat against vehicle when not in use
• Heavy duty powder coated steel construction | Weight: 36 lbs.

User questions & answers

Question:	Can you use a regular Pin for securing the rack to the hitch? Or must you use the threaded bolt
Answer:	Note that max weight capacity per bike is 35lb.
Question:	What is the maximum tire width that will fit
Answer:	Yes. Mi,e is new it does sway back and forth. It appears some people answered this about putting the bolt in. The automatic quick release ones do not have a bolt that you put in. It has the locking mechanism on it that is supposed to expand and keep it from wobbling but I can't see it's doing that. Disappointed in that as it makes me feel like it's not entirely safe going down the street. Thought it would be easier to use because it says no tools required to put it on the hitch. But it doesn't seem to be holding as well as the standard ones you palpable through
Question:	Does this rack fit 3 inch tires - not fat just +tires? ie Trek Stash or Roscoe
Answer:	Do not buy any product from this company. We had a 4 bike rack. The frame broke off while we were driving and we lost all 4 bikes. Company would not stand behind warranty
Question:	Does this bike rack have the ability to fold down for rear hatch access
Answer:	It comes with an adapter for the 2 inch receiver and am currently using it on my truck with no problems at all.